0x00FFFFFF, 0x00040006 /* HDMI parameters */
};
+static enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder)
+{
+ struct drm_encoder *encoder = &intel_encoder->base;
+ int type = intel_encoder->type;
+
+ if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+ return intel_dp->port;
+
+ } else if (type == INTEL_OUTPUT_HDMI) {
+ struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+ return intel_hdmi->ddi_port;
+
+ } else if (type == INTEL_OUTPUT_ANALOG) {
+ return PORT_E;
+
+ } else {
+ DRM_ERROR("Invalid DDI encoder type %d\n", type);
+ BUG();
+ }
+}
+
/* On Haswell, DDI port buffers must be programmed with correct values
* in advance. The buffer values are different for FDI and DP modes,
* but the HDMI/DVI fields are shared among those. So we program the DDI
int pipe = intel_crtc->pipe;
u32 reg, temp, i;
- /* Configure CPU PLL, wait for warmup */
- I915_WRITE(SPLL_CTL,
- SPLL_PLL_ENABLE |
- SPLL_PLL_FREQ_1350MHz |
- SPLL_PLL_SCC);
-
- /* Use SPLL to drive the output when in FDI mode */
- I915_WRITE(PORT_CLK_SEL(PORT_E),
- PORT_CLK_SEL_SPLL);
- I915_WRITE(PIPE_CLK_SEL(pipe),
- PIPE_CLK_SEL_PORT(PORT_E));
-
- udelay(20);
-
/* Start the training iterating through available voltages and emphasis */
for (i=0; i < ARRAY_SIZE(hsw_ddi_buf_ctl_values); i++) {
/* Configure DP_TP_CTL with auto-training */
DP_TP_CTL_ENHANCED_FRAME_ENABLE |
DP_TP_CTL_ENABLE);
- /* Enable PIPE_DDI_FUNC_CTL for the pipe to work in FDI mode */
- temp = I915_READ(DDI_FUNC_CTL(pipe));
- temp &= ~PIPE_DDI_PORT_MASK;
- temp |= PIPE_DDI_SELECT_PORT(PORT_E) |
- PIPE_DDI_MODE_SELECT_FDI |
- PIPE_DDI_FUNC_ENABLE |
- PIPE_DDI_PORT_WIDTH_X2;
- I915_WRITE(DDI_FUNC_CTL(pipe),
- temp);
break;
} else {
DRM_ERROR("Error training BUF_CTL %d\n", i);
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
- struct drm_device *dev = encoder->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = encoder->crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
- int port = intel_hdmi->ddi_port;
+ struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
+ int port = intel_ddi_get_encoder_port(intel_encoder);
int pipe = intel_crtc->pipe;
- int p, n2, r2;
- u32 temp, i;
+ int type = intel_encoder->type;
- /* On Haswell, we need to enable the clocks and prepare DDI function to
- * work in HDMI mode for this pipe.
- */
- DRM_DEBUG_KMS("Preparing HDMI DDI mode for Haswell on port %c, pipe %c\n", port_name(port), pipe_name(pipe));
+ DRM_DEBUG_KMS("Preparing DDI mode for Haswell on port %c, pipe %c\n",
+ port_name(port), pipe_name(pipe));
+
+ if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+ intel_dp->DP = DDI_BUF_CTL_ENABLE | DDI_BUF_EMP_400MV_0DB_HSW;
+ switch (intel_dp->lane_count) {
+ case 1:
+ intel_dp->DP |= DDI_PORT_WIDTH_X1;
+ break;
+ case 2:
+ intel_dp->DP |= DDI_PORT_WIDTH_X2;
+ break;
+ case 4:
+ intel_dp->DP |= DDI_PORT_WIDTH_X4;
+ break;
+ default:
+ intel_dp->DP |= DDI_PORT_WIDTH_X4;
+ WARN(1, "Unexpected DP lane count %d\n",
+ intel_dp->lane_count);
+ break;
+ }
+
+ intel_dp_init_link_config(intel_dp);
+
+ } else if (type == INTEL_OUTPUT_HDMI) {
+ struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+
+ if (intel_hdmi->has_audio) {
+ /* Proper support for digital audio needs a new logic
+ * and a new set of registers, so we leave it for future
+ * patch bombing.
+ */
+ DRM_DEBUG_DRIVER("HDMI audio on pipe %c on DDI\n",
+ pipe_name(intel_crtc->pipe));
+
+ /* write eld */
+ DRM_DEBUG_DRIVER("HDMI audio: write eld information\n");
+ intel_write_eld(encoder, adjusted_mode);
+ }
+
+ intel_hdmi->set_infoframes(encoder, adjusted_mode);
+ }
+}
+
+static struct intel_encoder *
+intel_ddi_get_crtc_encoder(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_encoder *intel_encoder, *ret = NULL;
+ int num_encoders = 0;
+
+ for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
+ ret = intel_encoder;
+ num_encoders++;
+ }
+
+ if (num_encoders != 1)
+ WARN(1, "%d encoders on crtc for pipe %d\n", num_encoders,
+ intel_crtc->pipe);
+
+ BUG_ON(ret == NULL);
+ return ret;
+}
+
+void intel_ddi_put_crtc_pll(struct drm_crtc *crtc)
+{
+ struct drm_i915_private *dev_priv = crtc->dev->dev_private;
+ struct intel_ddi_plls *plls = &dev_priv->ddi_plls;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ uint32_t val;
+
+ switch (intel_crtc->ddi_pll_sel) {
+ case PORT_CLK_SEL_SPLL:
+ plls->spll_refcount--;
+ if (plls->spll_refcount == 0) {
+ DRM_DEBUG_KMS("Disabling SPLL\n");
+ val = I915_READ(SPLL_CTL);
+ WARN_ON(!(val & SPLL_PLL_ENABLE));
+ I915_WRITE(SPLL_CTL, val & ~SPLL_PLL_ENABLE);
+ POSTING_READ(SPLL_CTL);
+ }
+ break;
+ case PORT_CLK_SEL_WRPLL1:
+ plls->wrpll1_refcount--;
+ if (plls->wrpll1_refcount == 0) {
+ DRM_DEBUG_KMS("Disabling WRPLL 1\n");
+ val = I915_READ(WRPLL_CTL1);
+ WARN_ON(!(val & WRPLL_PLL_ENABLE));
+ I915_WRITE(WRPLL_CTL1, val & ~WRPLL_PLL_ENABLE);
+ POSTING_READ(WRPLL_CTL1);
+ }
+ break;
+ case PORT_CLK_SEL_WRPLL2:
+ plls->wrpll2_refcount--;
+ if (plls->wrpll2_refcount == 0) {
+ DRM_DEBUG_KMS("Disabling WRPLL 2\n");
+ val = I915_READ(WRPLL_CTL2);
+ WARN_ON(!(val & WRPLL_PLL_ENABLE));
+ I915_WRITE(WRPLL_CTL2, val & ~WRPLL_PLL_ENABLE);
+ POSTING_READ(WRPLL_CTL2);
+ }
+ break;
+ }
+
+ WARN(plls->spll_refcount < 0, "Invalid SPLL refcount\n");
+ WARN(plls->wrpll1_refcount < 0, "Invalid WRPLL1 refcount\n");
+ WARN(plls->wrpll2_refcount < 0, "Invalid WRPLL2 refcount\n");
+
+ intel_crtc->ddi_pll_sel = PORT_CLK_SEL_NONE;
+}
+
+static void intel_ddi_calculate_wrpll(int clock, int *p, int *n2, int *r2)
+{
+ u32 i;
for (i = 0; i < ARRAY_SIZE(wrpll_tmds_clock_table); i++)
- if (crtc->mode.clock <= wrpll_tmds_clock_table[i].clock)
+ if (clock <= wrpll_tmds_clock_table[i].clock)
break;
if (i == ARRAY_SIZE(wrpll_tmds_clock_table))
i--;
- p = wrpll_tmds_clock_table[i].p;
- n2 = wrpll_tmds_clock_table[i].n2;
- r2 = wrpll_tmds_clock_table[i].r2;
+ *p = wrpll_tmds_clock_table[i].p;
+ *n2 = wrpll_tmds_clock_table[i].n2;
+ *r2 = wrpll_tmds_clock_table[i].r2;
- if (wrpll_tmds_clock_table[i].clock != crtc->mode.clock)
- DRM_INFO("WR PLL: using settings for %dKHz on %dKHz mode\n",
- wrpll_tmds_clock_table[i].clock, crtc->mode.clock);
+ if (wrpll_tmds_clock_table[i].clock != clock)
+ DRM_INFO("WRPLL: using settings for %dKHz on %dKHz mode\n",
+ wrpll_tmds_clock_table[i].clock, clock);
- DRM_DEBUG_KMS("WR PLL: %dKHz refresh rate with p=%d, n2=%d r2=%d\n",
- crtc->mode.clock, p, n2, r2);
+ DRM_DEBUG_KMS("WRPLL: %dKHz refresh rate with p=%d, n2=%d r2=%d\n",
+ clock, *p, *n2, *r2);
+}
- /* Enable LCPLL if disabled */
- temp = I915_READ(LCPLL_CTL);
- if (temp & LCPLL_PLL_DISABLE)
- I915_WRITE(LCPLL_CTL,
- temp & ~LCPLL_PLL_DISABLE);
+bool intel_ddi_pll_mode_set(struct drm_crtc *crtc, int clock)
+{
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
+ struct drm_encoder *encoder = &intel_encoder->base;
+ struct drm_i915_private *dev_priv = crtc->dev->dev_private;
+ struct intel_ddi_plls *plls = &dev_priv->ddi_plls;
+ int type = intel_encoder->type;
+ enum pipe pipe = intel_crtc->pipe;
+ uint32_t reg, val;
- /* Configure WR PLL 1, program the correct divider values for
- * the desired frequency and wait for warmup */
- I915_WRITE(WRPLL_CTL1,
- WRPLL_PLL_ENABLE |
- WRPLL_PLL_SELECT_LCPLL_2700 |
- WRPLL_DIVIDER_REFERENCE(r2) |
- WRPLL_DIVIDER_FEEDBACK(n2) |
- WRPLL_DIVIDER_POST(p));
+ /* TODO: reuse PLLs when possible (compare values) */
- udelay(20);
+ intel_ddi_put_crtc_pll(crtc);
- /* Use WRPLL1 clock to drive the output to the port, and tell the pipe to use
- * this port for connection.
- */
- I915_WRITE(PORT_CLK_SEL(port),
- PORT_CLK_SEL_WRPLL1);
- I915_WRITE(PIPE_CLK_SEL(pipe),
- PIPE_CLK_SEL_PORT(port));
+ if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+ switch (intel_dp->link_bw) {
+ case DP_LINK_BW_1_62:
+ intel_crtc->ddi_pll_sel = PORT_CLK_SEL_LCPLL_810;
+ break;
+ case DP_LINK_BW_2_7:
+ intel_crtc->ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350;
+ break;
+ case DP_LINK_BW_5_4:
+ intel_crtc->ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700;
+ break;
+ default:
+ DRM_ERROR("Link bandwidth %d unsupported\n",
+ intel_dp->link_bw);
+ return false;
+ }
+
+ /* We don't need to turn any PLL on because we'll use LCPLL. */
+ return true;
+
+ } else if (type == INTEL_OUTPUT_HDMI) {
+ int p, n2, r2;
+
+ if (plls->wrpll1_refcount == 0) {
+ DRM_DEBUG_KMS("Using WRPLL 1 on pipe %c\n",
+ pipe_name(pipe));
+ plls->wrpll1_refcount++;
+ reg = WRPLL_CTL1;
+ intel_crtc->ddi_pll_sel = PORT_CLK_SEL_WRPLL1;
+ } else if (plls->wrpll2_refcount == 0) {
+ DRM_DEBUG_KMS("Using WRPLL 2 on pipe %c\n",
+ pipe_name(pipe));
+ plls->wrpll2_refcount++;
+ reg = WRPLL_CTL2;
+ intel_crtc->ddi_pll_sel = PORT_CLK_SEL_WRPLL2;
+ } else {
+ DRM_ERROR("No WRPLLs available!\n");
+ return false;
+ }
+
+ WARN(I915_READ(reg) & WRPLL_PLL_ENABLE,
+ "WRPLL already enabled\n");
+
+ intel_ddi_calculate_wrpll(clock, &p, &n2, &r2);
+
+ val = WRPLL_PLL_ENABLE | WRPLL_PLL_SELECT_LCPLL_2700 |
+ WRPLL_DIVIDER_REFERENCE(r2) | WRPLL_DIVIDER_FEEDBACK(n2) |
+ WRPLL_DIVIDER_POST(p);
+
+ } else if (type == INTEL_OUTPUT_ANALOG) {
+ if (plls->spll_refcount == 0) {
+ DRM_DEBUG_KMS("Using SPLL on pipe %c\n",
+ pipe_name(pipe));
+ plls->spll_refcount++;
+ reg = SPLL_CTL;
+ intel_crtc->ddi_pll_sel = PORT_CLK_SEL_SPLL;
+ }
+ WARN(I915_READ(reg) & SPLL_PLL_ENABLE,
+ "SPLL already enabled\n");
+
+ val = SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz | SPLL_PLL_SSC;
+
+ } else {
+ WARN(1, "Invalid DDI encoder type %d\n", type);
+ return false;
+ }
+
+ I915_WRITE(reg, val);
udelay(20);
- if (intel_hdmi->has_audio) {
- /* Proper support for digital audio needs a new logic and a new set
- * of registers, so we leave it for future patch bombing.
- */
- DRM_DEBUG_DRIVER("HDMI audio on pipe %c on DDI\n",
- pipe_name(intel_crtc->pipe));
+ return true;
+}
- /* write eld */
- DRM_DEBUG_DRIVER("HDMI audio: write eld information\n");
- intel_write_eld(encoder, adjusted_mode);
+void intel_ddi_set_pipe_settings(struct drm_crtc *crtc)
+{
+ struct drm_i915_private *dev_priv = crtc->dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
+ enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
+ int type = intel_encoder->type;
+ uint32_t temp;
+
+ if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
+
+ temp = TRANS_MSA_SYNC_CLK;
+ switch (intel_crtc->bpp) {
+ case 18:
+ temp |= TRANS_MSA_6_BPC;
+ break;
+ case 24:
+ temp |= TRANS_MSA_8_BPC;
+ break;
+ case 30:
+ temp |= TRANS_MSA_10_BPC;
+ break;
+ case 36:
+ temp |= TRANS_MSA_12_BPC;
+ break;
+ default:
+ temp |= TRANS_MSA_8_BPC;
+ WARN(1, "%d bpp unsupported by DDI function\n",
+ intel_crtc->bpp);
+ }
+ I915_WRITE(TRANS_MSA_MISC(cpu_transcoder), temp);
}
+}
- /* Enable PIPE_DDI_FUNC_CTL for the pipe to work in HDMI mode */
- temp = PIPE_DDI_FUNC_ENABLE | PIPE_DDI_SELECT_PORT(port);
+void intel_ddi_enable_pipe_func(struct drm_crtc *crtc)
+{
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
+ struct drm_encoder *encoder = &intel_encoder->base;
+ struct drm_i915_private *dev_priv = crtc->dev->dev_private;
+ enum pipe pipe = intel_crtc->pipe;
+ enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
+ int type = intel_encoder->type;
+ uint32_t temp;
+
+ /* Enable TRANS_DDI_FUNC_CTL for the pipe to work in HDMI mode */
+ temp = TRANS_DDI_FUNC_ENABLE;
switch (intel_crtc->bpp) {
case 18:
- temp |= PIPE_DDI_BPC_6;
+ temp |= TRANS_DDI_BPC_6;
break;
case 24:
- temp |= PIPE_DDI_BPC_8;
+ temp |= TRANS_DDI_BPC_8;
break;
case 30:
- temp |= PIPE_DDI_BPC_10;
+ temp |= TRANS_DDI_BPC_10;
break;
case 36:
- temp |= PIPE_DDI_BPC_12;
+ temp |= TRANS_DDI_BPC_12;
break;
default:
- WARN(1, "%d bpp unsupported by pipe DDI function\n",
+ WARN(1, "%d bpp unsupported by transcoder DDI function\n",
intel_crtc->bpp);
}
- if (intel_hdmi->has_hdmi_sink)
- temp |= PIPE_DDI_MODE_SELECT_HDMI;
- else
- temp |= PIPE_DDI_MODE_SELECT_DVI;
+ if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
+ temp |= TRANS_DDI_PVSYNC;
+ if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
+ temp |= TRANS_DDI_PHSYNC;
+
+ if (cpu_transcoder == TRANSCODER_EDP) {
+ switch (pipe) {
+ case PIPE_A:
+ temp |= TRANS_DDI_EDP_INPUT_A_ONOFF;
+ break;
+ case PIPE_B:
+ temp |= TRANS_DDI_EDP_INPUT_B_ONOFF;
+ break;
+ case PIPE_C:
+ temp |= TRANS_DDI_EDP_INPUT_C_ONOFF;
+ break;
+ default:
+ BUG();
+ break;
+ }
+ }
+
+ if (type == INTEL_OUTPUT_HDMI) {
+ struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+
+ if (intel_hdmi->has_hdmi_sink)
+ temp |= TRANS_DDI_MODE_SELECT_HDMI;
+ else
+ temp |= TRANS_DDI_MODE_SELECT_DVI;
- if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
- temp |= PIPE_DDI_PVSYNC;
- if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
- temp |= PIPE_DDI_PHSYNC;
+ temp |= TRANS_DDI_SELECT_PORT(intel_hdmi->ddi_port);
- I915_WRITE(DDI_FUNC_CTL(pipe), temp);
+ } else if (type == INTEL_OUTPUT_ANALOG) {
+ temp |= TRANS_DDI_MODE_SELECT_FDI;
+ temp |= TRANS_DDI_SELECT_PORT(PORT_E);
- intel_hdmi->set_infoframes(encoder, adjusted_mode);
+ } else if (type == INTEL_OUTPUT_DISPLAYPORT ||
+ type == INTEL_OUTPUT_EDP) {
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+ temp |= TRANS_DDI_MODE_SELECT_DP_SST;
+ temp |= TRANS_DDI_SELECT_PORT(intel_dp->port);
+
+ switch (intel_dp->lane_count) {
+ case 1:
+ temp |= TRANS_DDI_PORT_WIDTH_X1;
+ break;
+ case 2:
+ temp |= TRANS_DDI_PORT_WIDTH_X2;
+ break;
+ case 4:
+ temp |= TRANS_DDI_PORT_WIDTH_X4;
+ break;
+ default:
+ temp |= TRANS_DDI_PORT_WIDTH_X4;
+ WARN(1, "Unsupported lane count %d\n",
+ intel_dp->lane_count);
+ }
+
+ } else {
+ WARN(1, "Invalid encoder type %d for pipe %d\n",
+ intel_encoder->type, pipe);
+ }
+
+ I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp);
+}
+
+void intel_ddi_disable_transcoder_func(struct drm_i915_private *dev_priv,
+ enum transcoder cpu_transcoder)
+{
+ uint32_t reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
+ uint32_t val = I915_READ(reg);
+
+ val &= ~(TRANS_DDI_FUNC_ENABLE | TRANS_DDI_PORT_MASK);
+ val |= TRANS_DDI_PORT_NONE;
+ I915_WRITE(reg, val);
}
bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
+ enum port port = intel_ddi_get_encoder_port(encoder);
u32 tmp;
int i;
- tmp = I915_READ(DDI_BUF_CTL(intel_hdmi->ddi_port));
+ tmp = I915_READ(DDI_BUF_CTL(port));
if (!(tmp & DDI_BUF_CTL_ENABLE))
return false;
- for_each_pipe(i) {
- tmp = I915_READ(DDI_FUNC_CTL(i));
+ if (port == PORT_A) {
+ tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
- if ((tmp & PIPE_DDI_PORT_MASK)
- == PIPE_DDI_SELECT_PORT(intel_hdmi->ddi_port)) {
- *pipe = i;
- return true;
+ switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
+ case TRANS_DDI_EDP_INPUT_A_ON:
+ case TRANS_DDI_EDP_INPUT_A_ONOFF:
+ *pipe = PIPE_A;
+ break;
+ case TRANS_DDI_EDP_INPUT_B_ONOFF:
+ *pipe = PIPE_B;
+ break;
+ case TRANS_DDI_EDP_INPUT_C_ONOFF:
+ *pipe = PIPE_C;
+ break;
+ }
+
+ return true;
+ } else {
+ for (i = TRANSCODER_A; i <= TRANSCODER_C; i++) {
+ tmp = I915_READ(TRANS_DDI_FUNC_CTL(i));
+
+ if ((tmp & TRANS_DDI_PORT_MASK)
+ == TRANS_DDI_SELECT_PORT(port)) {
+ *pipe = i;
+ return true;
+ }
}
}
- DRM_DEBUG_KMS("No pipe for ddi port %i found\n", intel_hdmi->ddi_port);
+ DRM_DEBUG_KMS("No pipe for ddi port %i found\n", port);
return true;
}
-void intel_enable_ddi(struct intel_encoder *encoder)
+static uint32_t intel_ddi_get_crtc_pll(struct drm_i915_private *dev_priv,
+ enum pipe pipe)
+{
+ uint32_t temp, ret;
+ enum port port;
+ enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
+ pipe);
+ int i;
+
+ if (cpu_transcoder == TRANSCODER_EDP) {
+ port = PORT_A;
+ } else {
+ temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
+ temp &= TRANS_DDI_PORT_MASK;
+
+ for (i = PORT_B; i <= PORT_E; i++)
+ if (temp == TRANS_DDI_SELECT_PORT(i))
+ port = i;
+ }
+
+ ret = I915_READ(PORT_CLK_SEL(port));
+
+ DRM_DEBUG_KMS("Pipe %c connected to port %c using clock 0x%08x\n",
+ pipe_name(pipe), port_name(port), ret);
+
+ return ret;
+}
+
+void intel_ddi_setup_hw_pll_state(struct drm_device *dev)
{
- struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
- int port = intel_hdmi->ddi_port;
- u32 temp;
+ enum pipe pipe;
+ struct intel_crtc *intel_crtc;
- temp = I915_READ(DDI_BUF_CTL(port));
- temp |= DDI_BUF_CTL_ENABLE;
+ for_each_pipe(pipe) {
+ intel_crtc =
+ to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
- /* Enable DDI_BUF_CTL. In HDMI/DVI mode, the port width,
- * and swing/emphasis values are ignored so nothing special needs
- * to be done besides enabling the port.
- */
- I915_WRITE(DDI_BUF_CTL(port), temp);
+ if (!intel_crtc->active)
+ continue;
+
+ intel_crtc->ddi_pll_sel = intel_ddi_get_crtc_pll(dev_priv,
+ pipe);
+
+ switch (intel_crtc->ddi_pll_sel) {
+ case PORT_CLK_SEL_SPLL:
+ dev_priv->ddi_plls.spll_refcount++;
+ break;
+ case PORT_CLK_SEL_WRPLL1:
+ dev_priv->ddi_plls.wrpll1_refcount++;
+ break;
+ case PORT_CLK_SEL_WRPLL2:
+ dev_priv->ddi_plls.wrpll2_refcount++;
+ break;
+ }
+ }
}
-void intel_disable_ddi(struct intel_encoder *encoder)
+void intel_ddi_enable_pipe_clock(struct intel_crtc *intel_crtc)
{
- struct drm_device *dev = encoder->base.dev;
+ struct drm_crtc *crtc = &intel_crtc->base;
+ struct drm_i915_private *dev_priv = crtc->dev->dev_private;
+ struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
+ enum port port = intel_ddi_get_encoder_port(intel_encoder);
+ enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
+
+ if (cpu_transcoder != TRANSCODER_EDP)
+ I915_WRITE(TRANS_CLK_SEL(cpu_transcoder),
+ TRANS_CLK_SEL_PORT(port));
+}
+
+void intel_ddi_disable_pipe_clock(struct intel_crtc *intel_crtc)
+{
+ struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private;
+ enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
+
+ if (cpu_transcoder != TRANSCODER_EDP)
+ I915_WRITE(TRANS_CLK_SEL(cpu_transcoder),
+ TRANS_CLK_SEL_DISABLED);
+}
+
+void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
+{
+ struct drm_encoder *encoder = &intel_encoder->base;
+ struct drm_crtc *crtc = encoder->crtc;
+ struct drm_i915_private *dev_priv = encoder->dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ enum port port = intel_ddi_get_encoder_port(intel_encoder);
+
+ WARN_ON(intel_crtc->ddi_pll_sel == PORT_CLK_SEL_NONE);
+
+ I915_WRITE(PORT_CLK_SEL(port), intel_crtc->ddi_pll_sel);
+
+ if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT) {
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+ intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
+ intel_dp_start_link_train(intel_dp);
+ intel_dp_complete_link_train(intel_dp);
+ }
+}
+
+static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
+ enum port port)
+{
+ uint32_t reg = DDI_BUF_CTL(port);
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ udelay(1);
+ if (I915_READ(reg) & DDI_BUF_IS_IDLE)
+ return;
+ }
+ DRM_ERROR("Timeout waiting for DDI BUF %c idle bit\n", port_name(port));
+}
+
+void intel_ddi_post_disable(struct intel_encoder *intel_encoder)
+{
+ struct drm_encoder *encoder = &intel_encoder->base;
+ struct drm_i915_private *dev_priv = encoder->dev->dev_private;
+ enum port port = intel_ddi_get_encoder_port(intel_encoder);
+ uint32_t val;
+ bool wait = false;
+
+ val = I915_READ(DDI_BUF_CTL(port));
+ if (val & DDI_BUF_CTL_ENABLE) {
+ val &= ~DDI_BUF_CTL_ENABLE;
+ I915_WRITE(DDI_BUF_CTL(port), val);
+ wait = true;
+ }
+
+ val = I915_READ(DP_TP_CTL(port));
+ val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
+ val |= DP_TP_CTL_LINK_TRAIN_PAT1;
+ I915_WRITE(DP_TP_CTL(port), val);
+
+ if (wait)
+ intel_wait_ddi_buf_idle(dev_priv, port);
+
+ I915_WRITE(PORT_CLK_SEL(port), PORT_CLK_SEL_NONE);
+}
+
+void intel_enable_ddi(struct intel_encoder *intel_encoder)
+{
+ struct drm_encoder *encoder = &intel_encoder->base;
+ struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
- int port = intel_hdmi->ddi_port;
- u32 temp;
+ enum port port = intel_ddi_get_encoder_port(intel_encoder);
+ int type = intel_encoder->type;
+
+ if (type == INTEL_OUTPUT_HDMI) {
+ /* In HDMI/DVI mode, the port width, and swing/emphasis values
+ * are ignored so nothing special needs to be done besides
+ * enabling the port.
+ */
+ I915_WRITE(DDI_BUF_CTL(port), DDI_BUF_CTL_ENABLE);
+ } else if (type == INTEL_OUTPUT_EDP) {
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+ ironlake_edp_backlight_on(intel_dp);
+ }
+}
+
+void intel_disable_ddi(struct intel_encoder *intel_encoder)
+{
+ struct drm_encoder *encoder = &intel_encoder->base;
+ int type = intel_encoder->type;
+
+ if (type == INTEL_OUTPUT_EDP) {
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+ ironlake_edp_backlight_off(intel_dp);
+ }
+}
+
+int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv)
+{
+ if (I915_READ(HSW_FUSE_STRAP) & HSW_CDCLK_LIMIT)
+ return 450;
+ else if ((I915_READ(LCPLL_CTL) & LCPLL_CLK_FREQ_MASK) ==
+ LCPLL_CLK_FREQ_450)
+ return 450;
+ else
+ return 540;
+}
+
+void intel_ddi_pll_init(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t val = I915_READ(LCPLL_CTL);
+
+ /* The LCPLL register should be turned on by the BIOS. For now let's
+ * just check its state and print errors in case something is wrong.
+ * Don't even try to turn it on.
+ */
+
+ DRM_DEBUG_KMS("CDCLK running at %dMHz\n",
+ intel_ddi_get_cdclk_freq(dev_priv));
+
+ if (val & LCPLL_CD_SOURCE_FCLK)
+ DRM_ERROR("CDCLK source is not LCPLL\n");
+
+ if (val & LCPLL_PLL_DISABLE)
+ DRM_ERROR("LCPLL is disabled\n");
+}
+
+void intel_ddi_prepare_link_retrain(struct drm_encoder *encoder)
+{
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+ struct drm_i915_private *dev_priv = encoder->dev->dev_private;
+ enum port port = intel_dp->port;
+ bool wait;
+ uint32_t val;
+
+ if (I915_READ(DP_TP_CTL(port)) & DP_TP_CTL_ENABLE) {
+ val = I915_READ(DDI_BUF_CTL(port));
+ if (val & DDI_BUF_CTL_ENABLE) {
+ val &= ~DDI_BUF_CTL_ENABLE;
+ I915_WRITE(DDI_BUF_CTL(port), val);
+ wait = true;
+ }
+
+ val = I915_READ(DP_TP_CTL(port));
+ val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
+ val |= DP_TP_CTL_LINK_TRAIN_PAT1;
+ I915_WRITE(DP_TP_CTL(port), val);
+ POSTING_READ(DP_TP_CTL(port));
+
+ if (wait)
+ intel_wait_ddi_buf_idle(dev_priv, port);
+ }
+
+ val = DP_TP_CTL_ENABLE | DP_TP_CTL_MODE_SST |
+ DP_TP_CTL_LINK_TRAIN_PAT1 | DP_TP_CTL_SCRAMBLE_DISABLE;
+ if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN)
+ val |= DP_TP_CTL_ENHANCED_FRAME_ENABLE;
+ I915_WRITE(DP_TP_CTL(port), val);
+ POSTING_READ(DP_TP_CTL(port));
- temp = I915_READ(DDI_BUF_CTL(port));
- temp &= ~DDI_BUF_CTL_ENABLE;
+ intel_dp->DP |= DDI_BUF_CTL_ENABLE;
+ I915_WRITE(DDI_BUF_CTL(port), intel_dp->DP);
+ POSTING_READ(DDI_BUF_CTL(port));
- I915_WRITE(DDI_BUF_CTL(port), temp);
+ udelay(600);
}