static void ironlake_pch_clock_get(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config);
-static int intel_set_mode(struct drm_crtc *crtc,
- struct drm_atomic_state *state);
+static int intel_set_mode(struct drm_atomic_state *state);
static int intel_framebuffer_init(struct drm_device *dev,
struct intel_framebuffer *ifb,
struct drm_mode_fb_cmd2 *mode_cmd,
clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
}
+static bool
+needs_modeset(struct drm_crtc_state *state)
+{
+ return state->mode_changed || state->active_changed;
+}
+
/**
* Returns whether any output on the specified pipe is of the specified type
*/
int count = 0;
for_each_intel_crtc(dev, crtc)
- count += crtc->active &&
+ count += crtc->base.state->active &&
intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO);
return count;
/* Disable DVO 2x clock on both PLLs if necessary */
if (IS_I830(dev) &&
intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO) &&
- intel_num_dvo_pipes(dev) == 1) {
+ !intel_num_dvo_pipes(dev)) {
I915_WRITE(DPLL(PIPE_B),
I915_READ(DPLL(PIPE_B)) & ~DPLL_DVO_2X_MODE);
I915_WRITE(DPLL(PIPE_A),
dev_priv->preserve_bios_swizzle = true;
primary->fb = fb;
- primary->state->crtc = &intel_crtc->base;
- primary->crtc = &intel_crtc->base;
+ primary->crtc = primary->state->crtc = &intel_crtc->base;
update_state_fb(primary);
+ intel_crtc->base.state->plane_mask |= (1 << drm_plane_index(primary));
obj->frontbuffer_bits |= INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe);
}
}
}
-void intel_crtc_reset(struct intel_crtc *crtc)
-{
- struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-
- if (!crtc->active)
- return;
-
- intel_crtc_disable_planes(&crtc->base);
- dev_priv->display.crtc_disable(&crtc->base);
- dev_priv->display.crtc_enable(&crtc->base);
- intel_crtc_enable_planes(&crtc->base);
-}
-
void intel_prepare_reset(struct drm_device *dev)
{
- struct drm_i915_private *dev_priv = to_i915(dev);
- struct intel_crtc *crtc;
-
/* no reset support for gen2 */
if (IS_GEN2(dev))
return;
return;
drm_modeset_lock_all(dev);
-
/*
* Disabling the crtcs gracefully seems nicer. Also the
* g33 docs say we should at least disable all the planes.
*/
- for_each_intel_crtc(dev, crtc) {
- if (!crtc->active)
- continue;
-
- intel_crtc_disable_planes(&crtc->base);
- dev_priv->display.crtc_disable(&crtc->base);
- }
+ intel_display_suspend(dev);
}
void intel_finish_reset(struct drm_device *dev)
lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
}
-void intel_put_shared_dpll(struct intel_crtc *crtc)
-{
- struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
-
- if (pll == NULL)
- return;
-
- if (!(pll->config.crtc_mask & (1 << crtc->pipe))) {
- WARN(1, "bad %s crtc mask\n", pll->name);
- return;
- }
-
- pll->config.crtc_mask &= ~(1 << crtc->pipe);
- if (pll->config.crtc_mask == 0) {
- WARN_ON(pll->on);
- WARN_ON(pll->active);
- }
-
- crtc->config->shared_dpll = DPLL_ID_PRIVATE;
-}
-
struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
struct intel_shared_dpll *pll;
+ struct intel_shared_dpll_config *shared_dpll;
enum intel_dpll_id i;
+ shared_dpll = intel_atomic_get_shared_dpll_state(crtc_state->base.state);
+
if (HAS_PCH_IBX(dev_priv->dev)) {
/* Ironlake PCH has a fixed PLL->PCH pipe mapping. */
i = (enum intel_dpll_id) crtc->pipe;
DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
crtc->base.base.id, pll->name);
- WARN_ON(pll->new_config->crtc_mask);
+ WARN_ON(shared_dpll[i].crtc_mask);
goto found;
}
pll = &dev_priv->shared_dplls[i];
DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
crtc->base.base.id, pll->name);
- WARN_ON(pll->new_config->crtc_mask);
+ WARN_ON(shared_dpll[i].crtc_mask);
goto found;
}
pll = &dev_priv->shared_dplls[i];
/* Only want to check enabled timings first */
- if (pll->new_config->crtc_mask == 0)
+ if (shared_dpll[i].crtc_mask == 0)
continue;
if (memcmp(&crtc_state->dpll_hw_state,
- &pll->new_config->hw_state,
- sizeof(pll->new_config->hw_state)) == 0) {
+ &shared_dpll[i].hw_state,
+ sizeof(crtc_state->dpll_hw_state)) == 0) {
DRM_DEBUG_KMS("CRTC:%d sharing existing %s (crtc mask 0x%08x, ative %d)\n",
crtc->base.base.id, pll->name,
- pll->new_config->crtc_mask,
+ shared_dpll[i].crtc_mask,
pll->active);
goto found;
}
/* Ok no matching timings, maybe there's a free one? */
for (i = 0; i < dev_priv->num_shared_dpll; i++) {
pll = &dev_priv->shared_dplls[i];
- if (pll->new_config->crtc_mask == 0) {
+ if (shared_dpll[i].crtc_mask == 0) {
DRM_DEBUG_KMS("CRTC:%d allocated %s\n",
crtc->base.base.id, pll->name);
goto found;
return NULL;
found:
- if (pll->new_config->crtc_mask == 0)
- pll->new_config->hw_state = crtc_state->dpll_hw_state;
+ if (shared_dpll[i].crtc_mask == 0)
+ shared_dpll[i].hw_state =
+ crtc_state->dpll_hw_state;
crtc_state->shared_dpll = i;
DRM_DEBUG_DRIVER("using %s for pipe %c\n", pll->name,
pipe_name(crtc->pipe));
- pll->new_config->crtc_mask |= 1 << crtc->pipe;
+ shared_dpll[i].crtc_mask |= 1 << crtc->pipe;
return pll;
}
-/**
- * intel_shared_dpll_start_config - start a new PLL staged config
- * @dev_priv: DRM device
- * @clear_pipes: mask of pipes that will have their PLLs freed
- *
- * Starts a new PLL staged config, copying the current config but
- * releasing the references of pipes specified in clear_pipes.
- */
-static int intel_shared_dpll_start_config(struct drm_i915_private *dev_priv,
- unsigned clear_pipes)
-{
- struct intel_shared_dpll *pll;
- enum intel_dpll_id i;
-
- for (i = 0; i < dev_priv->num_shared_dpll; i++) {
- pll = &dev_priv->shared_dplls[i];
-
- pll->new_config = kmemdup(&pll->config, sizeof pll->config,
- GFP_KERNEL);
- if (!pll->new_config)
- goto cleanup;
-
- pll->new_config->crtc_mask &= ~clear_pipes;
- }
-
- return 0;
-
-cleanup:
- while (--i >= 0) {
- pll = &dev_priv->shared_dplls[i];
- kfree(pll->new_config);
- pll->new_config = NULL;
- }
-
- return -ENOMEM;
-}
-
-static void intel_shared_dpll_commit(struct drm_i915_private *dev_priv)
+static void intel_shared_dpll_commit(struct drm_atomic_state *state)
{
+ struct drm_i915_private *dev_priv = to_i915(state->dev);
+ struct intel_shared_dpll_config *shared_dpll;
struct intel_shared_dpll *pll;
enum intel_dpll_id i;
- for (i = 0; i < dev_priv->num_shared_dpll; i++) {
- pll = &dev_priv->shared_dplls[i];
-
- WARN_ON(pll->new_config == &pll->config);
-
- pll->config = *pll->new_config;
- kfree(pll->new_config);
- pll->new_config = NULL;
- }
-}
-
-static void intel_shared_dpll_abort_config(struct drm_i915_private *dev_priv)
-{
- struct intel_shared_dpll *pll;
- enum intel_dpll_id i;
+ if (!to_intel_atomic_state(state)->dpll_set)
+ return;
+ shared_dpll = to_intel_atomic_state(state)->shared_dpll;
for (i = 0; i < dev_priv->num_shared_dpll; i++) {
pll = &dev_priv->shared_dplls[i];
-
- WARN_ON(pll->new_config == &pll->config);
-
- kfree(pll->new_config);
- pll->new_config = NULL;
+ pll->config = shared_dpll[i];
}
}
bool reenable_ips = false;
/* The clocks have to be on to load the palette. */
- if (!crtc->state->enable || !intel_crtc->active)
+ if (!crtc->state->active)
return;
if (HAS_GMCH_DISPLAY(dev_priv->dev)) {
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- WARN_ON(!crtc->state->enable);
-
- if (intel_crtc->active)
+ if (WARN_ON(intel_crtc->active))
return;
if (intel_crtc->config->has_pch_encoder)
return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A;
}
-/*
- * This implements the workaround described in the "notes" section of the mode
- * set sequence documentation. When going from no pipes or single pipe to
- * multiple pipes, and planes are enabled after the pipe, we need to wait at
- * least 2 vblanks on the first pipe before enabling planes on the second pipe.
- */
-static void haswell_mode_set_planes_workaround(struct intel_crtc *crtc)
-{
- struct drm_device *dev = crtc->base.dev;
- struct intel_crtc *crtc_it, *other_active_crtc = NULL;
-
- /* We want to get the other_active_crtc only if there's only 1 other
- * active crtc. */
- for_each_intel_crtc(dev, crtc_it) {
- if (!crtc_it->active || crtc_it == crtc)
- continue;
-
- if (other_active_crtc)
- return;
-
- other_active_crtc = crtc_it;
- }
- if (!other_active_crtc)
- return;
-
- intel_wait_for_vblank(dev, other_active_crtc->pipe);
- intel_wait_for_vblank(dev, other_active_crtc->pipe);
-}
-
static void haswell_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *encoder;
- int pipe = intel_crtc->pipe;
-
- WARN_ON(!crtc->state->enable);
+ int pipe = intel_crtc->pipe, hsw_workaround_pipe;
+ struct intel_crtc_state *pipe_config =
+ to_intel_crtc_state(crtc->state);
- if (intel_crtc->active)
+ if (WARN_ON(intel_crtc->active))
return;
if (intel_crtc_to_shared_dpll(intel_crtc))
/* If we change the relative order between pipe/planes enabling, we need
* to change the workaround. */
- haswell_mode_set_planes_workaround(intel_crtc);
+ hsw_workaround_pipe = pipe_config->hsw_workaround_pipe;
+ if (IS_HASWELL(dev) && hsw_workaround_pipe != INVALID_PIPE) {
+ intel_wait_for_vblank(dev, hsw_workaround_pipe);
+ intel_wait_for_vblank(dev, hsw_workaround_pipe);
+ }
}
static void ironlake_pfit_disable(struct intel_crtc *crtc)
int pipe = intel_crtc->pipe;
u32 reg, temp;
- if (!intel_crtc->active)
+ if (WARN_ON(!intel_crtc->active))
return;
for_each_encoder_on_crtc(dev, crtc, encoder)
struct intel_encoder *encoder;
enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
- if (!intel_crtc->active)
+ if (WARN_ON(!intel_crtc->active))
return;
for_each_encoder_on_crtc(dev, crtc, encoder) {
intel_disable_shared_dpll(intel_crtc);
}
-static void ironlake_crtc_off(struct drm_crtc *crtc)
-{
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- intel_put_shared_dpll(intel_crtc);
-}
-
-
static void i9xx_pfit_enable(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
intel_display_set_init_power(dev_priv, false);
}
-void broxton_set_cdclk(struct drm_device *dev, int frequency)
+static void intel_update_max_cdclk(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (IS_SKYLAKE(dev)) {
+ u32 limit = I915_READ(SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK;
+
+ if (limit == SKL_DFSM_CDCLK_LIMIT_675)
+ dev_priv->max_cdclk_freq = 675000;
+ else if (limit == SKL_DFSM_CDCLK_LIMIT_540)
+ dev_priv->max_cdclk_freq = 540000;
+ else if (limit == SKL_DFSM_CDCLK_LIMIT_450)
+ dev_priv->max_cdclk_freq = 450000;
+ else
+ dev_priv->max_cdclk_freq = 337500;
+ } else if (IS_BROADWELL(dev)) {
+ /*
+ * FIXME with extra cooling we can allow
+ * 540 MHz for ULX and 675 Mhz for ULT.
+ * How can we know if extra cooling is
+ * available? PCI ID, VTB, something else?
+ */
+ if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
+ dev_priv->max_cdclk_freq = 450000;
+ else if (IS_BDW_ULX(dev))
+ dev_priv->max_cdclk_freq = 450000;
+ else if (IS_BDW_ULT(dev))
+ dev_priv->max_cdclk_freq = 540000;
+ else
+ dev_priv->max_cdclk_freq = 675000;
+ } else if (IS_VALLEYVIEW(dev)) {
+ dev_priv->max_cdclk_freq = 400000;
+ } else {
+ /* otherwise assume cdclk is fixed */
+ dev_priv->max_cdclk_freq = dev_priv->cdclk_freq;
+ }
+
+ DRM_DEBUG_DRIVER("Max CD clock rate: %d kHz\n",
+ dev_priv->max_cdclk_freq);
+}
+
+static void intel_update_cdclk(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ dev_priv->cdclk_freq = dev_priv->display.get_display_clock_speed(dev);
+ DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz\n",
+ dev_priv->cdclk_freq);
+
+ /*
+ * Program the gmbus_freq based on the cdclk frequency.
+ * BSpec erroneously claims we should aim for 4MHz, but
+ * in fact 1MHz is the correct frequency.
+ */
+ if (IS_VALLEYVIEW(dev)) {
+ /*
+ * Program the gmbus_freq based on the cdclk frequency.
+ * BSpec erroneously claims we should aim for 4MHz, but
+ * in fact 1MHz is the correct frequency.
+ */
+ I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->cdclk_freq, 1000));
+ }
+
+ if (dev_priv->max_cdclk_freq == 0)
+ intel_update_max_cdclk(dev);
+}
+
+static void broxton_set_cdclk(struct drm_device *dev, int frequency)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t divider;
return;
}
- dev_priv->cdclk_freq = frequency;
+ intel_update_cdclk(dev);
}
void broxton_init_cdclk(struct drm_device *dev)
static void skl_set_cdclk(struct drm_i915_private *dev_priv, unsigned int freq)
{
+ struct drm_device *dev = dev_priv->dev;
u32 freq_select, pcu_ack;
DRM_DEBUG_DRIVER("Changing CDCLK to %dKHz\n", freq);
mutex_lock(&dev_priv->rps.hw_lock);
sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL, pcu_ack);
mutex_unlock(&dev_priv->rps.hw_lock);
+
+ intel_update_cdclk(dev);
}
void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
return vco_freq[hpll_freq] * 1000;
}
-static void intel_update_max_cdclk(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- if (IS_VALLEYVIEW(dev)) {
- dev_priv->max_cdclk_freq = 400000;
- } else {
- /* otherwise assume cdclk is fixed */
- dev_priv->max_cdclk_freq = dev_priv->cdclk_freq;
- }
-
- DRM_DEBUG_DRIVER("Max CD clock rate: %d kHz\n",
- dev_priv->max_cdclk_freq);
-}
-
-static void intel_update_cdclk(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- dev_priv->cdclk_freq = dev_priv->display.get_display_clock_speed(dev);
- DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz\n",
- dev_priv->cdclk_freq);
-
- /*
- * Program the gmbus_freq based on the cdclk frequency.
- * BSpec erroneously claims we should aim for 4MHz, but
- * in fact 1MHz is the correct frequency.
- */
- if (IS_VALLEYVIEW(dev)) {
- /*
- * Program the gmbus_freq based on the cdclk frequency.
- * BSpec erroneously claims we should aim for 4MHz, but
- * in fact 1MHz is the correct frequency.
- */
- I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->cdclk_freq, 1000));
- }
-
- if (dev_priv->max_cdclk_freq == 0)
- intel_update_max_cdclk(dev);
-}
-
/* Adjust CDclk dividers to allow high res or save power if possible */
static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
{
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
int max_pixclk = intel_mode_max_pixclk(state->dev, state);
- int cdclk, i;
+ int cdclk, ret = 0;
if (max_pixclk < 0)
return max_pixclk;
/* add all active pipes to the state */
for_each_crtc(state->dev, crtc) {
- if (!crtc->state->enable)
- continue;
-
crtc_state = drm_atomic_get_crtc_state(state, crtc);
if (IS_ERR(crtc_state))
return PTR_ERR(crtc_state);
- }
- /* disable/enable all currently active pipes while we change cdclk */
- for_each_crtc_in_state(state, crtc, crtc_state, i)
- if (crtc_state->enable)
- crtc_state->mode_changed = true;
+ if (!crtc_state->active || needs_modeset(crtc_state))
+ continue;
- return 0;
+ crtc_state->mode_changed = true;
+
+ ret = drm_atomic_add_affected_connectors(state, crtc);
+ if (ret)
+ break;
+
+ ret = drm_atomic_add_affected_planes(state, crtc);
+ if (ret)
+ break;
+ }
+
+ return ret;
}
static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
int pipe = intel_crtc->pipe;
bool is_dsi;
- WARN_ON(!crtc->state->enable);
-
- if (intel_crtc->active)
+ if (WARN_ON(intel_crtc->active))
return;
is_dsi = intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI);
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- WARN_ON(!crtc->state->enable);
-
- if (intel_crtc->active)
+ if (WARN_ON(intel_crtc->active))
return;
i9xx_set_pll_dividers(intel_crtc);
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- if (!intel_crtc->active)
+ if (WARN_ON(!intel_crtc->active))
return;
/*
mutex_unlock(&dev->struct_mutex);
}
-static void i9xx_crtc_off(struct drm_crtc *crtc)
+/*
+ * turn all crtc's off, but do not adjust state
+ * This has to be paired with a call to intel_modeset_setup_hw_state.
+ */
+void intel_display_suspend(struct drm_device *dev)
{
-}
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct drm_crtc *crtc;
-/* Master function to enable/disable CRTC and corresponding power wells */
-void intel_crtc_control(struct drm_crtc *crtc, bool enable)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- enum intel_display_power_domain domain;
- unsigned long domains;
+ for_each_crtc(dev, crtc) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ enum intel_display_power_domain domain;
+ unsigned long domains;
- if (enable) {
- if (!intel_crtc->active) {
- domains = get_crtc_power_domains(crtc);
- for_each_power_domain(domain, domains)
- intel_display_power_get(dev_priv, domain);
- intel_crtc->enabled_power_domains = domains;
+ if (!intel_crtc->active)
+ continue;
- dev_priv->display.crtc_enable(crtc);
- intel_crtc_enable_planes(crtc);
- }
- } else {
- if (intel_crtc->active) {
- intel_crtc_disable_planes(crtc);
- dev_priv->display.crtc_disable(crtc);
+ intel_crtc_disable_planes(crtc);
+ dev_priv->display.crtc_disable(crtc);
- domains = intel_crtc->enabled_power_domains;
- for_each_power_domain(domain, domains)
- intel_display_power_put(dev_priv, domain);
- intel_crtc->enabled_power_domains = 0;
- }
+ domains = intel_crtc->enabled_power_domains;
+ for_each_power_domain(domain, domains)
+ intel_display_power_put(dev_priv, domain);
+ intel_crtc->enabled_power_domains = 0;
}
}
-/**
- * Sets the power management mode of the pipe and plane.
- */
-void intel_crtc_update_dpms(struct drm_crtc *crtc)
+/* Master function to enable/disable CRTC and corresponding power wells */
+int intel_crtc_control(struct drm_crtc *crtc, bool enable)
{
struct drm_device *dev = crtc->dev;
- struct intel_encoder *intel_encoder;
- bool enable = false;
+ struct drm_mode_config *config = &dev->mode_config;
+ struct drm_modeset_acquire_ctx *ctx = config->acquire_ctx;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_crtc_state *pipe_config;
+ struct drm_atomic_state *state;
+ int ret;
- for_each_encoder_on_crtc(dev, crtc, intel_encoder)
- enable |= intel_encoder->connectors_active;
+ if (enable == intel_crtc->active)
+ return 0;
- intel_crtc_control(crtc, enable);
+ if (enable && !crtc->state->enable)
+ return 0;
- crtc->state->active = enable;
-}
+ /* this function should be called with drm_modeset_lock_all for now */
+ if (WARN_ON(!ctx))
+ return -EIO;
+ lockdep_assert_held(&ctx->ww_ctx);
-static void intel_crtc_disable(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_connector *connector;
- struct drm_i915_private *dev_priv = dev->dev_private;
+ state = drm_atomic_state_alloc(dev);
+ if (WARN_ON(!state))
+ return -ENOMEM;
- /* crtc should still be enabled when we disable it. */
- WARN_ON(!crtc->state->enable);
+ state->acquire_ctx = ctx;
+ state->allow_modeset = true;
- intel_crtc_disable_planes(crtc);
- dev_priv->display.crtc_disable(crtc);
- dev_priv->display.off(crtc);
+ pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
+ if (IS_ERR(pipe_config)) {
+ ret = PTR_ERR(pipe_config);
+ goto err;
+ }
+ pipe_config->base.active = enable;
- drm_plane_helper_disable(crtc->primary);
+ ret = intel_set_mode(state);
+ if (!ret)
+ return ret;
- /* Update computed state. */
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- if (!connector->encoder || !connector->encoder->crtc)
- continue;
+err:
+ DRM_ERROR("Updating crtc active failed with %i\n", ret);
+ drm_atomic_state_free(state);
+ return ret;
+}
- if (connector->encoder->crtc != crtc)
- continue;
+/**
+ * Sets the power management mode of the pipe and plane.
+ */
+void intel_crtc_update_dpms(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct intel_encoder *intel_encoder;
+ bool enable = false;
- connector->dpms = DRM_MODE_DPMS_OFF;
- to_intel_encoder(connector->encoder)->connectors_active = false;
- }
+ for_each_encoder_on_crtc(dev, crtc, intel_encoder)
+ enable |= intel_encoder->connectors_active;
+
+ intel_crtc_control(crtc, enable);
}
void intel_encoder_destroy(struct drm_encoder *encoder)
return ret;
}
+static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
+ struct intel_crtc_state *pipe_config)
+{
+ if (pipe_config->pipe_bpp > 24)
+ return false;
+
+ /* HSW can handle pixel rate up to cdclk? */
+ if (IS_HASWELL(dev_priv->dev))
+ return true;
+
+ /*
+ * We compare against max which means we must take
+ * the increased cdclk requirement into account when
+ * calculating the new cdclk.
+ *
+ * Should measure whether using a lower cdclk w/o IPS
+ */
+ return ilk_pipe_pixel_rate(pipe_config) <=
+ dev_priv->max_cdclk_freq * 95 / 100;
+}
+
static void hsw_compute_ips_config(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config)
{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
pipe_config->ips_enabled = i915.enable_ips &&
- hsw_crtc_supports_ips(crtc) &&
- pipe_config->pipe_bpp <= 24;
+ hsw_crtc_supports_ips(crtc) &&
+ pipe_config_supports_ips(dev_priv, pipe_config);
}
static int intel_crtc_compute_config(struct intel_crtc *crtc,
uint32_t cdctl = I915_READ(CDCLK_CTL);
uint32_t linkrate;
- if (!(lcpll1 & LCPLL_PLL_ENABLE)) {
- WARN(1, "LCPLL1 not enabled\n");
+ if (!(lcpll1 & LCPLL_PLL_ENABLE))
return 24000; /* 24MHz is the cd freq with NSSC ref */
- }
if ((cdctl & CDCLK_FREQ_SEL_MASK) == CDCLK_FREQ_540)
return 540000;
broxton_set_cdclk(dev, req_cdclk);
}
+/* compute the max rate for new configuration */
+static int ilk_max_pixel_rate(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ struct intel_crtc *intel_crtc;
+ struct drm_crtc *crtc;
+ int max_pixel_rate = 0;
+ int pixel_rate;
+
+ for_each_crtc(dev, crtc) {
+ if (!crtc->state->enable)
+ continue;
+
+ intel_crtc = to_intel_crtc(crtc);
+ pixel_rate = ilk_pipe_pixel_rate(intel_crtc->config);
+
+ /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
+ if (IS_BROADWELL(dev) && intel_crtc->config->ips_enabled)
+ pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95);
+
+ max_pixel_rate = max(max_pixel_rate, pixel_rate);
+ }
+
+ return max_pixel_rate;
+}
+
+static void broadwell_set_cdclk(struct drm_device *dev, int cdclk)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t val, data;
+ int ret;
+
+ if (WARN((I915_READ(LCPLL_CTL) &
+ (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
+ LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
+ LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
+ LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
+ "trying to change cdclk frequency with cdclk not enabled\n"))
+ return;
+
+ mutex_lock(&dev_priv->rps.hw_lock);
+ ret = sandybridge_pcode_write(dev_priv,
+ BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
+ mutex_unlock(&dev_priv->rps.hw_lock);
+ if (ret) {
+ DRM_ERROR("failed to inform pcode about cdclk change\n");
+ return;
+ }
+
+ val = I915_READ(LCPLL_CTL);
+ val |= LCPLL_CD_SOURCE_FCLK;
+ I915_WRITE(LCPLL_CTL, val);
+
+ if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
+ LCPLL_CD_SOURCE_FCLK_DONE, 1))
+ DRM_ERROR("Switching to FCLK failed\n");
+
+ val = I915_READ(LCPLL_CTL);
+ val &= ~LCPLL_CLK_FREQ_MASK;
+
+ switch (cdclk) {
+ case 450000:
+ val |= LCPLL_CLK_FREQ_450;
+ data = 0;
+ break;
+ case 540000:
+ val |= LCPLL_CLK_FREQ_54O_BDW;
+ data = 1;
+ break;
+ case 337500:
+ val |= LCPLL_CLK_FREQ_337_5_BDW;
+ data = 2;
+ break;
+ case 675000:
+ val |= LCPLL_CLK_FREQ_675_BDW;
+ data = 3;
+ break;
+ default:
+ WARN(1, "invalid cdclk frequency\n");
+ return;
+ }
+
+ I915_WRITE(LCPLL_CTL, val);
+
+ val = I915_READ(LCPLL_CTL);
+ val &= ~LCPLL_CD_SOURCE_FCLK;
+ I915_WRITE(LCPLL_CTL, val);
+
+ if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
+ LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
+ DRM_ERROR("Switching back to LCPLL failed\n");
+
+ mutex_lock(&dev_priv->rps.hw_lock);
+ sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data);
+ mutex_unlock(&dev_priv->rps.hw_lock);
+
+ intel_update_cdclk(dev);
+
+ WARN(cdclk != dev_priv->cdclk_freq,
+ "cdclk requested %d kHz but got %d kHz\n",
+ cdclk, dev_priv->cdclk_freq);
+}
+
+static int broadwell_calc_cdclk(struct drm_i915_private *dev_priv,
+ int max_pixel_rate)
+{
+ int cdclk;
+
+ /*
+ * FIXME should also account for plane ratio
+ * once 64bpp pixel formats are supported.
+ */
+ if (max_pixel_rate > 540000)
+ cdclk = 675000;
+ else if (max_pixel_rate > 450000)
+ cdclk = 540000;
+ else if (max_pixel_rate > 337500)
+ cdclk = 450000;
+ else
+ cdclk = 337500;
+
+ /*
+ * FIXME move the cdclk caclulation to
+ * compute_config() so we can fail gracegully.
+ */
+ if (cdclk > dev_priv->max_cdclk_freq) {
+ DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
+ cdclk, dev_priv->max_cdclk_freq);
+ cdclk = dev_priv->max_cdclk_freq;
+ }
+
+ return cdclk;
+}
+
+static int broadwell_modeset_global_pipes(struct drm_atomic_state *state)
+{
+ struct drm_i915_private *dev_priv = to_i915(state->dev);
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *crtc_state;
+ int max_pixclk = ilk_max_pixel_rate(dev_priv);
+ int cdclk, i;
+
+ cdclk = broadwell_calc_cdclk(dev_priv, max_pixclk);
+
+ if (cdclk == dev_priv->cdclk_freq)
+ return 0;
+
+ /* add all active pipes to the state */
+ for_each_crtc(state->dev, crtc) {
+ if (!crtc->state->enable)
+ continue;
+
+ crtc_state = drm_atomic_get_crtc_state(state, crtc);
+ if (IS_ERR(crtc_state))
+ return PTR_ERR(crtc_state);
+ }
+
+ /* disable/enable all currently active pipes while we change cdclk */
+ for_each_crtc_in_state(state, crtc, crtc_state, i)
+ if (crtc_state->enable)
+ crtc_state->mode_changed = true;
+
+ return 0;
+}
+
+static void broadwell_modeset_global_resources(struct drm_atomic_state *state)
+{
+ struct drm_device *dev = state->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int max_pixel_rate = ilk_max_pixel_rate(dev_priv);
+ int req_cdclk = broadwell_calc_cdclk(dev_priv, max_pixel_rate);
+
+ if (req_cdclk != dev_priv->cdclk_freq)
+ broadwell_set_cdclk(dev, req_cdclk);
+}
+
static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
retry:
ret = drm_modeset_lock(&config->connection_mutex, ctx);
if (ret)
- goto fail_unlock;
+ goto fail;
/*
* Algorithm gets a little messy:
ret = drm_modeset_lock(&crtc->mutex, ctx);
if (ret)
- goto fail_unlock;
+ goto fail;
ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
if (ret)
- goto fail_unlock;
+ goto fail;
old->dpms_mode = connector->dpms;
old->load_detect_temp = false;
continue;
if (possible_crtc->state->enable)
continue;
- /* This can occur when applying the pipe A quirk on resume. */
- if (to_intel_crtc(possible_crtc)->new_enabled)
- continue;
crtc = possible_crtc;
break;
*/
if (!crtc) {
DRM_DEBUG_KMS("no pipe available for load-detect\n");
- goto fail_unlock;
+ goto fail;
}
ret = drm_modeset_lock(&crtc->mutex, ctx);
if (ret)
- goto fail_unlock;
+ goto fail;
ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
if (ret)
- goto fail_unlock;
- intel_encoder->new_crtc = to_intel_crtc(crtc);
- to_intel_connector(connector)->new_encoder = intel_encoder;
+ goto fail;
intel_crtc = to_intel_crtc(crtc);
- intel_crtc->new_enabled = true;
old->dpms_mode = connector->dpms;
old->load_detect_temp = true;
old->release_fb = NULL;
drm_mode_copy(&crtc_state->base.mode, mode);
- if (intel_set_mode(crtc, state)) {
+ if (intel_set_mode(state)) {
DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
if (old->release_fb)
old->release_fb->funcs->destroy(old->release_fb);
intel_wait_for_vblank(dev, intel_crtc->pipe);
return true;
- fail:
- intel_crtc->new_enabled = crtc->state->enable;
-fail_unlock:
+fail:
drm_atomic_state_free(state);
state = NULL;
if (IS_ERR(crtc_state))
goto fail;
- to_intel_connector(connector)->new_encoder = NULL;
- intel_encoder->new_crtc = NULL;
- intel_crtc->new_enabled = false;
-
connector_state->best_encoder = NULL;
connector_state->crtc = NULL;
if (ret)
goto fail;
- ret = intel_set_mode(crtc, state);
+ ret = intel_set_mode(state);
if (ret)
goto fail;
.atomic_flush = intel_finish_crtc_commit,
};
-/**
- * intel_modeset_update_staged_output_state
- *
- * Updates the staged output configuration state, e.g. after we've read out the
- * current hw state.
- */
-static void intel_modeset_update_staged_output_state(struct drm_device *dev)
-{
- struct intel_crtc *crtc;
- struct intel_encoder *encoder;
- struct intel_connector *connector;
-
- for_each_intel_connector(dev, connector) {
- connector->new_encoder =
- to_intel_encoder(connector->base.encoder);
- }
-
- for_each_intel_encoder(dev, encoder) {
- encoder->new_crtc =
- to_intel_crtc(encoder->base.crtc);
- }
-
- for_each_intel_crtc(dev, crtc) {
- crtc->new_enabled = crtc->base.state->enable;
- }
-}
-
/* Transitional helper to copy current connector/encoder state to
* connector->state. This is needed so that code that is partially
* converted to atomic does the right thing.
}
}
-/* Fixup legacy state after an atomic state swap.
- */
-static void intel_modeset_fixup_state(struct drm_atomic_state *state)
-{
- struct intel_crtc *crtc;
- struct intel_encoder *encoder;
- struct intel_connector *connector;
-
- for_each_intel_connector(state->dev, connector) {
- connector->base.encoder = connector->base.state->best_encoder;
- if (connector->base.encoder)
- connector->base.encoder->crtc =
- connector->base.state->crtc;
- }
-
- /* Update crtc of disabled encoders */
- for_each_intel_encoder(state->dev, encoder) {
- int num_connectors = 0;
-
- for_each_intel_connector(state->dev, connector)
- if (connector->base.encoder == &encoder->base)
- num_connectors++;
-
- if (num_connectors == 0)
- encoder->base.crtc = NULL;
- }
-
- for_each_intel_crtc(state->dev, crtc) {
- crtc->base.enabled = crtc->base.state->enable;
- crtc->config = to_intel_crtc_state(crtc->base.state);
- }
-
- /* Copy the new configuration to the staged state, to keep the few
- * pieces of code that haven't been converted yet happy */
- intel_modeset_update_staged_output_state(state->dev);
-}
-
static void
connected_sink_compute_bpp(struct intel_connector *connector,
struct intel_crtc_state *pipe_config)
static int
intel_modeset_pipe_config(struct drm_crtc *crtc,
- struct drm_atomic_state *state,
- struct intel_crtc_state *pipe_config)
+ struct drm_atomic_state *state)
{
+ struct drm_crtc_state *crtc_state;
+ struct intel_crtc_state *pipe_config;
struct intel_encoder *encoder;
struct drm_connector *connector;
struct drm_connector_state *connector_state;
return -EINVAL;
}
+ crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
+ if (WARN_ON(!crtc_state))
+ return -EINVAL;
+
+ pipe_config = to_intel_crtc_state(crtc_state);
+
+ /*
+ * XXX: Add all connectors to make the crtc state match the encoders.
+ */
+ if (!needs_modeset(&pipe_config->base)) {
+ ret = drm_atomic_add_affected_connectors(state, crtc);
+ if (ret)
+ return ret;
+ }
+
clear_intel_crtc_state(pipe_config);
pipe_config->cpu_transcoder =
DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
- return 0;
+ /* Check if we need to force a modeset */
+ if (pipe_config->has_audio !=
+ to_intel_crtc_state(crtc->state)->has_audio) {
+ pipe_config->base.mode_changed = true;
+ ret = drm_atomic_add_affected_planes(state, crtc);
+ }
+
+ /*
+ * Note we have an issue here with infoframes: current code
+ * only updates them on the full mode set path per hw
+ * requirements. So here we should be checking for any
+ * required changes and forcing a mode set.
+ */
fail:
return ret;
}
return false;
}
-static bool
-needs_modeset(struct drm_crtc_state *state)
-{
- return state->mode_changed || state->active_changed;
-}
-
static void
intel_modeset_update_state(struct drm_atomic_state *state)
{
struct drm_device *dev = state->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_encoder *intel_encoder;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
struct drm_connector *connector;
- int i;
- intel_shared_dpll_commit(dev_priv);
+ intel_shared_dpll_commit(state);
for_each_intel_encoder(dev, intel_encoder) {
if (!intel_encoder->base.crtc)
continue;
- for_each_crtc_in_state(state, crtc, crtc_state, i) {
- if (crtc != intel_encoder->base.crtc)
- continue;
-
- if (crtc_state->enable && needs_modeset(crtc_state))
- intel_encoder->connectors_active = false;
+ crtc = intel_encoder->base.crtc;
+ crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
+ if (!crtc_state || !needs_modeset(crtc->state))
+ continue;
- break;
- }
+ intel_encoder->connectors_active = false;
}
- drm_atomic_helper_swap_state(state->dev, state);
- intel_modeset_fixup_state(state);
+ drm_atomic_helper_update_legacy_modeset_state(state->dev, state);
/* Double check state. */
for_each_crtc(dev, crtc) {
WARN_ON(crtc->state->enable != intel_crtc_in_use(crtc));
+
+ to_intel_crtc(crtc)->config = to_intel_crtc_state(crtc->state);
+
+ /* Update hwmode for vblank functions */
+ if (crtc->state->active)
+ crtc->hwmode = crtc->state->adjusted_mode;
+ else
+ crtc->hwmode.crtc_clock = 0;
}
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
if (!connector->encoder || !connector->encoder->crtc)
continue;
- for_each_crtc_in_state(state, crtc, crtc_state, i) {
- if (crtc != connector->encoder->crtc)
- continue;
-
- if (crtc->state->enable && needs_modeset(crtc->state)) {
- struct drm_property *dpms_property =
- dev->mode_config.dpms_property;
+ crtc = connector->encoder->crtc;
+ crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
+ if (!crtc_state || !needs_modeset(crtc->state))
+ continue;
- connector->dpms = DRM_MODE_DPMS_ON;
- drm_object_property_set_value(&connector->base,
- dpms_property,
- DRM_MODE_DPMS_ON);
+ if (crtc->state->active) {
+ struct drm_property *dpms_property =
+ dev->mode_config.dpms_property;
- intel_encoder = to_intel_encoder(connector->encoder);
- intel_encoder->connectors_active = true;
- }
+ connector->dpms = DRM_MODE_DPMS_ON;
+ drm_object_property_set_value(&connector->base, dpms_property, DRM_MODE_DPMS_ON);
- break;
- }
+ intel_encoder = to_intel_encoder(connector->encoder);
+ intel_encoder->connectors_active = true;
+ } else
+ connector->dpms = DRM_MODE_DPMS_OFF;
}
-
}
static bool intel_fuzzy_clock_check(int clock1, int clock2)
struct intel_connector *connector;
for_each_intel_connector(dev, connector) {
+ struct drm_encoder *encoder = connector->base.encoder;
+ struct drm_connector_state *state = connector->base.state;
+
/* This also checks the encoder/connector hw state with the
* ->get_hw_state callbacks. */
intel_connector_check_state(connector);
- I915_STATE_WARN(&connector->new_encoder->base != connector->base.encoder,
+ I915_STATE_WARN(state->best_encoder != encoder,
"connector's staged encoder doesn't match current encoder\n");
}
}
encoder->base.base.id,
encoder->base.name);
- I915_STATE_WARN(&encoder->new_crtc->base != encoder->base.crtc,
- "encoder's stage crtc doesn't match current crtc\n");
I915_STATE_WARN(encoder->connectors_active && !encoder->base.crtc,
"encoder's active_connectors set, but no crtc\n");
enabled = true;
if (connector->base.dpms != DRM_MODE_DPMS_OFF)
active = true;
+
+ I915_STATE_WARN(connector->base.state->crtc != encoder->base.crtc,
+ "encoder's stage crtc doesn't match current crtc\n");
}
/*
* for MST connectors if we unplug the connector is gone
"crtc active state doesn't match with hw state "
"(expected %i, found %i)\n", crtc->active, active);
+ I915_STATE_WARN(crtc->active != crtc->base.state->active,
+ "transitional active state does not match atomic hw state "
+ "(expected %i, found %i)\n", crtc->base.state->active, crtc->active);
+
if (active &&
!intel_pipe_config_compare(dev, crtc->config, &pipe_config)) {
I915_STATE_WARN(1, "pipe state doesn't match!\n");
crtc->scanline_offset = 1;
}
-static struct intel_crtc_state *
-intel_modeset_compute_config(struct drm_crtc *crtc,
- struct drm_atomic_state *state)
-{
- struct intel_crtc_state *pipe_config;
- int ret = 0;
-
- ret = drm_atomic_add_affected_connectors(state, crtc);
- if (ret)
- return ERR_PTR(ret);
-
- ret = drm_atomic_helper_check_modeset(state->dev, state);
- if (ret)
- return ERR_PTR(ret);
-
- /*
- * Note this needs changes when we start tracking multiple modes
- * and crtcs. At that point we'll need to compute the whole config
- * (i.e. one pipe_config for each crtc) rather than just the one
- * for this crtc.
- */
- pipe_config = intel_atomic_get_crtc_state(state, to_intel_crtc(crtc));
- if (IS_ERR(pipe_config))
- return pipe_config;
-
- if (!pipe_config->base.enable)
- return pipe_config;
-
- ret = intel_modeset_pipe_config(crtc, state, pipe_config);
- if (ret)
- return ERR_PTR(ret);
-
- /* Check things that can only be changed through modeset */
- if (pipe_config->has_audio !=
- to_intel_crtc(crtc)->config->has_audio)
- pipe_config->base.mode_changed = true;
-
- /*
- * Note we have an issue here with infoframes: current code
- * only updates them on the full mode set path per hw
- * requirements. So here we should be checking for any
- * required changes and forcing a mode set.
- */
-
- intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,"[modeset]");
-
- ret = drm_atomic_helper_check_planes(state->dev, state);
- if (ret)
- return ERR_PTR(ret);
-
- return pipe_config;
-}
-
-static int __intel_set_mode_setup_plls(struct drm_atomic_state *state)
+static int intel_modeset_setup_plls(struct drm_atomic_state *state)
{
struct drm_device *dev = state->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
}
}
- ret = intel_shared_dpll_start_config(dev_priv, clear_pipes);
- if (ret)
- goto done;
+ if (clear_pipes) {
+ struct intel_shared_dpll_config *shared_dpll =
+ intel_atomic_get_shared_dpll_state(state);
+
+ for (i = 0; i < dev_priv->num_shared_dpll; i++)
+ shared_dpll[i].crtc_mask &= ~clear_pipes;
+ }
for_each_crtc_in_state(state, crtc, crtc_state, i) {
if (!needs_modeset(crtc_state) || !crtc_state->enable)
ret = dev_priv->display.crtc_compute_clock(intel_crtc,
intel_crtc_state);
- if (ret) {
- intel_shared_dpll_abort_config(dev_priv);
- goto done;
- }
+ if (ret)
+ return ret;
}
-done:
return ret;
}
+/*
+ * This implements the workaround described in the "notes" section of the mode
+ * set sequence documentation. When going from no pipes or single pipe to
+ * multiple pipes, and planes are enabled after the pipe, we need to wait at
+ * least 2 vblanks on the first pipe before enabling planes on the second pipe.
+ */
+static int haswell_mode_set_planes_workaround(struct drm_atomic_state *state)
+{
+ struct drm_crtc_state *crtc_state;
+ struct intel_crtc *intel_crtc;
+ struct drm_crtc *crtc;
+ struct intel_crtc_state *first_crtc_state = NULL;
+ struct intel_crtc_state *other_crtc_state = NULL;
+ enum pipe first_pipe = INVALID_PIPE, enabled_pipe = INVALID_PIPE;
+ int i;
+
+ /* look at all crtc's that are going to be enabled in during modeset */
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ intel_crtc = to_intel_crtc(crtc);
+
+ if (!crtc_state->active || !needs_modeset(crtc_state))
+ continue;
+
+ if (first_crtc_state) {
+ other_crtc_state = to_intel_crtc_state(crtc_state);
+ break;
+ } else {
+ first_crtc_state = to_intel_crtc_state(crtc_state);
+ first_pipe = intel_crtc->pipe;
+ }
+ }
+
+ /* No workaround needed? */
+ if (!first_crtc_state)
+ return 0;
+
+ /* w/a possibly needed, check how many crtc's are already enabled. */
+ for_each_intel_crtc(state->dev, intel_crtc) {
+ struct intel_crtc_state *pipe_config;
+
+ pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
+ if (IS_ERR(pipe_config))
+ return PTR_ERR(pipe_config);
+
+ pipe_config->hsw_workaround_pipe = INVALID_PIPE;
+
+ if (!pipe_config->base.active ||
+ needs_modeset(&pipe_config->base))
+ continue;
+
+ /* 2 or more enabled crtcs means no need for w/a */
+ if (enabled_pipe != INVALID_PIPE)
+ return 0;
+
+ enabled_pipe = intel_crtc->pipe;
+ }
+
+ if (enabled_pipe != INVALID_PIPE)
+ first_crtc_state->hsw_workaround_pipe = enabled_pipe;
+ else if (other_crtc_state)
+ other_crtc_state->hsw_workaround_pipe = first_pipe;
+
+ return 0;
+}
+
/* Code that should eventually be part of atomic_check() */
-static int __intel_set_mode_checks(struct drm_atomic_state *state)
+static int intel_modeset_checks(struct drm_atomic_state *state)
{
struct drm_device *dev = state->dev;
int ret;
* mode set on this crtc. For other crtcs we need to use the
* adjusted_mode bits in the crtc directly.
*/
- if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev)) {
- ret = valleyview_modeset_global_pipes(state);
+ if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev) || IS_BROADWELL(dev)) {
+ if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev))
+ ret = valleyview_modeset_global_pipes(state);
+ else
+ ret = broadwell_modeset_global_pipes(state);
+
if (ret)
return ret;
}
- ret = __intel_set_mode_setup_plls(state);
+ ret = intel_modeset_setup_plls(state);
if (ret)
return ret;
- return 0;
+ if (IS_HASWELL(dev))
+ ret = haswell_mode_set_planes_workaround(state);
+
+ return ret;
}
-static int __intel_set_mode(struct drm_crtc *modeset_crtc,
- struct intel_crtc_state *pipe_config)
+static int
+intel_modeset_compute_config(struct drm_atomic_state *state)
{
- struct drm_device *dev = modeset_crtc->dev;
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *crtc_state;
+ int ret, i;
+
+ ret = drm_atomic_helper_check_modeset(state->dev, state);
+ if (ret)
+ return ret;
+
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ if (!crtc_state->enable &&
+ WARN_ON(crtc_state->active))
+ crtc_state->active = false;
+
+ if (!crtc_state->enable)
+ continue;
+
+ ret = intel_modeset_pipe_config(crtc, state);
+ if (ret)
+ return ret;
+
+ intel_dump_pipe_config(to_intel_crtc(crtc),
+ to_intel_crtc_state(crtc_state),
+ "[modeset]");
+ }
+
+ ret = intel_modeset_checks(state);
+ if (ret)
+ return ret;
+
+ return drm_atomic_helper_check_planes(state->dev, state);
+}
+
+static int __intel_set_mode(struct drm_atomic_state *state)
+{
+ struct drm_device *dev = state->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_atomic_state *state = pipe_config->base.state;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
int ret = 0;
int i;
- ret = __intel_set_mode_checks(state);
- if (ret < 0)
- return ret;
-
ret = drm_atomic_helper_prepare_planes(dev, state);
if (ret)
return ret;
+ drm_atomic_helper_swap_state(dev, state);
+
for_each_crtc_in_state(state, crtc, crtc_state, i) {
- if (!needs_modeset(crtc_state))
+ if (!needs_modeset(crtc->state) || !crtc_state->active)
continue;
- if (!crtc_state->enable) {
- intel_crtc_disable(crtc);
- } else if (crtc->state->enable) {
- intel_crtc_disable_planes(crtc);
- dev_priv->display.crtc_disable(crtc);
- }
- }
-
- /* crtc->mode is already used by the ->mode_set callbacks, hence we need
- * to set it here already despite that we pass it down the callchain.
- *
- * Note we'll need to fix this up when we start tracking multiple
- * pipes; here we assume a single modeset_pipe and only track the
- * single crtc and mode.
- */
- if (pipe_config->base.enable && needs_modeset(&pipe_config->base)) {
- modeset_crtc->mode = pipe_config->base.mode;
-
- /*
- * Calculate and store various constants which
- * are later needed by vblank and swap-completion
- * timestamping. They are derived from true hwmode.
- */
- drm_calc_timestamping_constants(modeset_crtc,
- &pipe_config->base.adjusted_mode);
+ intel_crtc_disable_planes(crtc);
+ dev_priv->display.crtc_disable(crtc);
}
/* Only after disabling all output pipelines that will be changed can we
modeset_update_crtc_power_domains(state);
- drm_atomic_helper_commit_planes(dev, state);
-
/* Now enable the clocks, plane, pipe, and connectors that we set up. */
for_each_crtc_in_state(state, crtc, crtc_state, i) {
- if (!needs_modeset(crtc->state) || !crtc->state->enable)
+ drm_atomic_helper_commit_planes_on_crtc(crtc_state);
+
+ if (!needs_modeset(crtc->state) || !crtc->state->active)
continue;
update_scanline_offset(to_intel_crtc(crtc));
return 0;
}
-static int intel_set_mode_with_config(struct drm_crtc *crtc,
- struct intel_crtc_state *pipe_config)
+static int intel_set_mode_checked(struct drm_atomic_state *state)
{
+ struct drm_device *dev = state->dev;
int ret;
- ret = __intel_set_mode(crtc, pipe_config);
-
+ ret = __intel_set_mode(state);
if (ret == 0)
- intel_modeset_check_state(crtc->dev);
+ intel_modeset_check_state(dev);
return ret;
}
-static int intel_set_mode(struct drm_crtc *crtc,
- struct drm_atomic_state *state)
+static int intel_set_mode(struct drm_atomic_state *state)
{
- struct intel_crtc_state *pipe_config;
- int ret = 0;
-
- pipe_config = intel_modeset_compute_config(crtc, state);
- if (IS_ERR(pipe_config)) {
- ret = PTR_ERR(pipe_config);
- goto out;
- }
+ int ret;
- ret = intel_set_mode_with_config(crtc, pipe_config);
+ ret = intel_modeset_compute_config(state);
if (ret)
- goto out;
+ return ret;
-out:
- return ret;
+ return intel_set_mode_checked(state);
}
void intel_crtc_restore_mode(struct drm_crtc *crtc)
* need to copy the staged config to the atomic state, otherwise the
* mode set will just reapply the state the HW is already in. */
for_each_intel_encoder(dev, encoder) {
- if (&encoder->new_crtc->base != crtc)
+ if (encoder->base.crtc != crtc)
continue;
for_each_intel_connector(dev, connector) {
- if (connector->new_encoder != encoder)
+ if (connector->base.state->best_encoder != &encoder->base)
continue;
connector_state = drm_atomic_get_connector_state(state, &connector->base);
}
connector_state->crtc = crtc;
- connector_state->best_encoder = &encoder->base;
}
}
for_each_intel_crtc(dev, intel_crtc) {
- if (intel_crtc->new_enabled == intel_crtc->base.enabled)
- continue;
-
crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
if (IS_ERR(crtc_state)) {
DRM_DEBUG_KMS("Failed to add [CRTC:%d] to state: %ld\n",
continue;
}
- crtc_state->base.active = crtc_state->base.enable =
- intel_crtc->new_enabled;
-
if (&intel_crtc->base == crtc)
drm_mode_copy(&crtc_state->base.mode, &crtc->mode);
}
intel_modeset_setup_plane_state(state, crtc, &crtc->mode,
crtc->primary->fb, crtc->x, crtc->y);
- ret = intel_set_mode(crtc, state);
+ ret = intel_set_mode(state);
if (ret)
drm_atomic_state_free(state);
}
return 0;
}
-static bool primary_plane_visible(struct drm_crtc *crtc)
-{
- struct intel_plane_state *plane_state =
- to_intel_plane_state(crtc->primary->state);
-
- return plane_state->visible;
-}
-
static int intel_crtc_set_config(struct drm_mode_set *set)
{
struct drm_device *dev;
struct drm_atomic_state *state = NULL;
- struct intel_crtc_state *pipe_config;
- bool primary_plane_was_visible;
int ret;
BUG_ON(!set);
if (ret)
goto out;
- pipe_config = intel_modeset_compute_config(set->crtc, state);
- if (IS_ERR(pipe_config)) {
- ret = PTR_ERR(pipe_config);
+ ret = intel_modeset_compute_config(state);
+ if (ret)
goto out;
- }
intel_update_pipe_size(to_intel_crtc(set->crtc));
- primary_plane_was_visible = primary_plane_visible(set->crtc);
-
- ret = intel_set_mode_with_config(set->crtc, pipe_config);
-
- if (ret == 0 &&
- pipe_config->base.enable &&
- pipe_config->base.planes_changed &&
- !needs_modeset(&pipe_config->base)) {
- struct intel_crtc *intel_crtc = to_intel_crtc(set->crtc);
-
- /*
- * We need to make sure the primary plane is re-enabled if it
- * has previously been turned off.
- */
- if (ret == 0 && !primary_plane_was_visible &&
- primary_plane_visible(set->crtc)) {
- WARN_ON(!intel_crtc->active);
- intel_post_enable_primary(set->crtc);
- }
-
- /*
- * In the fastboot case this may be our only check of the
- * state after boot. It would be better to only do it on
- * the first update, but we don't have a nice way of doing that
- * (and really, set_config isn't used much for high freq page
- * flipping, so increasing its cost here shouldn't be a big
- * deal).
- */
- if (i915.fastboot && ret == 0)
- intel_modeset_check_state(set->crtc->dev);
- }
-
+ ret = intel_set_mode_checked(state);
if (ret) {
DRM_DEBUG_KMS("failed to set mode on [CRTC:%d], err = %d\n",
set->crtc->base.id, ret);
*/
if (IS_BROADWELL(dev))
intel_crtc->atomic.wait_vblank = true;
+
+ if (crtc_state && !needs_modeset(&crtc_state->base))
+ intel_crtc->atomic.post_enable_primary = true;
}
+ if (!state->visible && old_state->visible &&
+ crtc_state && !needs_modeset(&crtc_state->base))
+ intel_crtc->atomic.pre_disable_primary = true;
+
intel_crtc->atomic.fb_bits |=
INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe);
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_crtc_state *crtc_state = intel_crtc->base.state;
struct intel_plane *intel_plane;
struct drm_plane *p;
unsigned fb_bits = 0;
intel_runtime_pm_get(dev_priv);
/* Perform vblank evasion around commit operation */
- if (intel_crtc->active)
+ if (crtc_state->active && !needs_modeset(crtc_state))
intel_crtc->atomic.evade =
intel_pipe_update_start(intel_crtc,
&intel_crtc->atomic.start_vbl_count);
intel_runtime_pm_put(dev_priv);
- if (intel_crtc->atomic.wait_vblank)
+ if (intel_crtc->atomic.wait_vblank && intel_crtc->active)
intel_wait_for_vblank(dev, intel_crtc->pipe);
intel_frontbuffer_flip(dev, intel_crtc->atomic.fb_bits);
.output_poll_changed = intel_fbdev_output_poll_changed,
.atomic_check = intel_atomic_check,
.atomic_commit = intel_atomic_commit,
+ .atomic_state_alloc = intel_atomic_state_alloc,
+ .atomic_state_clear = intel_atomic_state_clear,
};
/* Set up chip specific display functions */
haswell_crtc_compute_clock;
dev_priv->display.crtc_enable = haswell_crtc_enable;
dev_priv->display.crtc_disable = haswell_crtc_disable;
- dev_priv->display.off = ironlake_crtc_off;
dev_priv->display.update_primary_plane =
skylake_update_primary_plane;
} else if (HAS_DDI(dev)) {
haswell_crtc_compute_clock;
dev_priv->display.crtc_enable = haswell_crtc_enable;
dev_priv->display.crtc_disable = haswell_crtc_disable;
- dev_priv->display.off = ironlake_crtc_off;
dev_priv->display.update_primary_plane =
ironlake_update_primary_plane;
} else if (HAS_PCH_SPLIT(dev)) {
ironlake_crtc_compute_clock;
dev_priv->display.crtc_enable = ironlake_crtc_enable;
dev_priv->display.crtc_disable = ironlake_crtc_disable;
- dev_priv->display.off = ironlake_crtc_off;
dev_priv->display.update_primary_plane =
ironlake_update_primary_plane;
} else if (IS_VALLEYVIEW(dev)) {
dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
dev_priv->display.crtc_enable = valleyview_crtc_enable;
dev_priv->display.crtc_disable = i9xx_crtc_disable;
- dev_priv->display.off = i9xx_crtc_off;
dev_priv->display.update_primary_plane =
i9xx_update_primary_plane;
} else {
dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
dev_priv->display.crtc_enable = i9xx_crtc_enable;
dev_priv->display.crtc_disable = i9xx_crtc_disable;
- dev_priv->display.off = i9xx_crtc_off;
dev_priv->display.update_primary_plane =
i9xx_update_primary_plane;
}
dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
dev_priv->display.fdi_link_train = hsw_fdi_link_train;
+ if (IS_BROADWELL(dev))
+ dev_priv->display.modeset_global_resources =
+ broadwell_modeset_global_resources;
} else if (IS_VALLEYVIEW(dev)) {
dev_priv->display.modeset_global_resources =
valleyview_modeset_global_resources;
* ... */
plane = crtc->plane;
to_intel_plane_state(crtc->base.primary->state)->visible = true;
+ crtc->base.primary->crtc = &crtc->base;
crtc->plane = !plane;
- intel_crtc_disable_planes(&crtc->base);
- dev_priv->display.crtc_disable(&crtc->base);
+ intel_crtc_control(&crtc->base, false);
crtc->plane = plane;
/* ... and break all links. */
* have active connectors/encoders. */
intel_crtc_update_dpms(&crtc->base);
- if (crtc->active != crtc->base.state->enable) {
+ if (crtc->active != crtc->base.state->active) {
struct intel_encoder *encoder;
/* This can happen either due to bugs in the get_hw_state
{
struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
- if (!crtc->active)
+ if (!crtc->base.enabled)
return false;
return I915_READ(DSPCNTR(crtc->plane)) & DISPLAY_PLANE_ENABLE;
}
-static void intel_modeset_readout_hw_state(struct drm_device *dev)
+static int readout_hw_crtc_state(struct drm_atomic_state *state,
+ struct intel_crtc *crtc)
{
- struct drm_i915_private *dev_priv = dev->dev_private;
- enum pipe pipe;
- struct intel_crtc *crtc;
- struct intel_encoder *encoder;
- struct intel_connector *connector;
- int i;
+ struct drm_i915_private *dev_priv = to_i915(state->dev);
+ struct intel_crtc_state *crtc_state;
+ struct drm_plane *primary = crtc->base.primary;
+ struct drm_plane_state *drm_plane_state;
+ struct intel_plane_state *plane_state;
+ int ret;
- for_each_intel_crtc(dev, crtc) {
- struct drm_plane *primary = crtc->base.primary;
- struct intel_plane_state *plane_state;
+ crtc_state = intel_atomic_get_crtc_state(state, crtc);
+ if (IS_ERR(crtc_state))
+ return PTR_ERR(crtc_state);
- memset(crtc->config, 0, sizeof(*crtc->config));
+ ret = drm_atomic_add_affected_planes(state, &crtc->base);
+ if (ret)
+ return ret;
- crtc->config->quirks |= PIPE_CONFIG_QUIRK_INHERITED_MODE;
+ memset(crtc_state, 0, sizeof(*crtc_state));
+ crtc_state->base.crtc = &crtc->base;
+ crtc_state->base.state = state;
- crtc->active = dev_priv->display.get_pipe_config(crtc,
- crtc->config);
+ crtc_state->quirks |= PIPE_CONFIG_QUIRK_INHERITED_MODE;
- crtc->base.state->enable = crtc->active;
- crtc->base.state->active = crtc->active;
- crtc->base.enabled = crtc->active;
+ crtc_state->base.enable = crtc_state->base.active =
+ crtc->base.enabled = dev_priv->display.get_pipe_config(crtc, crtc_state);
- plane_state = to_intel_plane_state(primary->state);
- plane_state->visible = primary_get_hw_state(crtc);
+ /* update transitional state */
+ crtc->active = crtc_state->base.active;
+ crtc->config = crtc_state;
- DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
- crtc->base.base.id,
- crtc->active ? "enabled" : "disabled");
- }
+ drm_plane_state = drm_atomic_get_plane_state(state, primary);
+ if (IS_ERR(drm_plane_state))
+ return PTR_ERR(drm_plane_state);
+ plane_state = to_intel_plane_state(drm_plane_state);
+ plane_state->visible = primary_get_hw_state(crtc);
+
+ if (plane_state->visible) {
+ primary->crtc = &crtc->base;
+ crtc_state->base.plane_mask |= 1 << drm_plane_index(primary);
+ } else
+ crtc_state->base.plane_mask &= ~(1 << drm_plane_index(primary));
+
+ DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
+ crtc->base.base.id,
+ crtc_state->base.active ? "enabled" : "disabled");
+
+ return 0;
+}
+
+static int readout_hw_pll_state(struct drm_atomic_state *state)
+{
+ struct drm_i915_private *dev_priv = to_i915(state->dev);
+ struct intel_shared_dpll_config *shared_dpll;
+ struct intel_crtc *crtc;
+ struct intel_crtc_state *crtc_state;
+ int i;
+
+ shared_dpll = intel_atomic_get_shared_dpll_state(state);
for (i = 0; i < dev_priv->num_shared_dpll; i++) {
struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
pll->on = pll->get_hw_state(dev_priv, pll,
- &pll->config.hw_state);
+ &shared_dpll[i].hw_state);
+
pll->active = 0;
- pll->config.crtc_mask = 0;
- for_each_intel_crtc(dev, crtc) {
- if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll) {
+ shared_dpll[i].crtc_mask = 0;
+
+ for_each_intel_crtc(state->dev, crtc) {
+ crtc_state = intel_atomic_get_crtc_state(state, crtc);
+ if (IS_ERR(crtc_state))
+ return PTR_ERR(crtc_state);
+
+ if (crtc_state->base.active &&
+ crtc_state->shared_dpll == i) {
pll->active++;
- pll->config.crtc_mask |= 1 << crtc->pipe;
+ shared_dpll[i].crtc_mask |=
+ 1 << crtc->pipe;
}
}
DRM_DEBUG_KMS("%s hw state readout: crtc_mask 0x%08x, on %i\n",
- pll->name, pll->config.crtc_mask, pll->on);
+ pll->name, shared_dpll[i].crtc_mask,
+ pll->on);
- if (pll->config.crtc_mask)
+ if (shared_dpll[i].crtc_mask)
intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
}
- for_each_intel_encoder(dev, encoder) {
- pipe = 0;
+ return 0;
+}
- if (encoder->get_hw_state(encoder, &pipe)) {
- crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
- encoder->base.crtc = &crtc->base;
- encoder->get_config(encoder, crtc->config);
- } else {
- encoder->base.crtc = NULL;
- }
+static struct drm_connector_state *
+get_connector_state_for_encoder(struct drm_atomic_state *state,
+ struct intel_encoder *encoder)
+{
+ struct drm_connector *connector;
+ struct drm_connector_state *connector_state;
+ int i;
- encoder->connectors_active = false;
- DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe %c\n",
- encoder->base.base.id,
- encoder->base.name,
- encoder->base.crtc ? "enabled" : "disabled",
- pipe_name(pipe));
- }
+ for_each_connector_in_state(state, connector, connector_state, i)
+ if (connector_state->best_encoder == &encoder->base)
+ return connector_state;
+
+ return NULL;
+}
+
+static int readout_hw_connector_encoder_state(struct drm_atomic_state *state)
+{
+ struct drm_device *dev = state->dev;
+ struct drm_i915_private *dev_priv = to_i915(state->dev);
+ struct intel_crtc *crtc;
+ struct drm_crtc_state *drm_crtc_state;
+ struct intel_crtc_state *crtc_state;
+ struct intel_encoder *encoder;
+ struct intel_connector *connector;
+ struct drm_connector_state *connector_state;
+ enum pipe pipe;
for_each_intel_connector(dev, connector) {
+ connector_state =
+ drm_atomic_get_connector_state(state, &connector->base);
+ if (IS_ERR(connector_state))
+ return PTR_ERR(connector_state);
+
if (connector->get_hw_state(connector)) {
connector->base.dpms = DRM_MODE_DPMS_ON;
- connector->encoder->connectors_active = true;
connector->base.encoder = &connector->encoder->base;
} else {
connector->base.dpms = DRM_MODE_DPMS_OFF;
connector->base.encoder = NULL;
}
+
+ /* We'll update the crtc field when reading encoder state */
+ connector_state->crtc = NULL;
+
+ connector_state->best_encoder = connector->base.encoder;
+
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n",
connector->base.base.id,
connector->base.name,
connector->base.encoder ? "enabled" : "disabled");
}
+
+ for_each_intel_encoder(dev, encoder) {
+ pipe = 0;
+
+ connector_state =
+ get_connector_state_for_encoder(state, encoder);
+
+ encoder->connectors_active = !!connector_state;
+
+ if (encoder->get_hw_state(encoder, &pipe)) {
+ encoder->base.crtc =
+ dev_priv->pipe_to_crtc_mapping[pipe];
+ crtc = to_intel_crtc(encoder->base.crtc);
+
+ drm_crtc_state =
+ state->crtc_states[drm_crtc_index(&crtc->base)];
+ crtc_state = to_intel_crtc_state(drm_crtc_state);
+
+ encoder->get_config(encoder, crtc_state);
+
+ if (connector_state)
+ connector_state->crtc = &crtc->base;
+ } else {
+ encoder->base.crtc = NULL;
+ }
+
+ DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe %c\n",
+ encoder->base.base.id,
+ encoder->base.name,
+ encoder->base.crtc ? "enabled" : "disabled",
+ pipe_name(pipe));
+ }
+
+ return 0;
+}
+
+static struct drm_atomic_state *
+intel_modeset_readout_hw_state(struct drm_device *dev)
+{
+ struct intel_crtc *crtc;
+ int ret = 0;
+
+ struct drm_atomic_state *state;
+
+ state = drm_atomic_state_alloc(dev);
+ if (!state)
+ return ERR_PTR(-ENOMEM);
+
+ state->acquire_ctx = dev->mode_config.acquire_ctx;
+
+ for_each_intel_crtc(dev, crtc) {
+ ret = readout_hw_crtc_state(state, crtc);
+ if (ret)
+ goto err_free;
+ }
+
+ ret = readout_hw_pll_state(state);
+ if (ret)
+ goto err_free;
+
+ ret = readout_hw_connector_encoder_state(state);
+ if (ret)
+ goto err_free;
+
+ return state;
+
+err_free:
+ drm_atomic_state_free(state);
+ return ERR_PTR(ret);
}
/* Scan out the current hw modeset state, sanitizes it and maps it into the drm
bool force_restore)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- enum pipe pipe;
- struct intel_crtc *crtc;
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *crtc_state;
struct intel_encoder *encoder;
+ struct drm_atomic_state *state;
+ struct intel_shared_dpll_config shared_dplls[I915_NUM_PLLS];
int i;
- intel_modeset_readout_hw_state(dev);
-
- /*
- * Now that we have the config, copy it to each CRTC struct
- * Note that this could go away if we move to using crtc_config
- * checking everywhere.
- */
- for_each_intel_crtc(dev, crtc) {
- if (crtc->active && i915.fastboot) {
- intel_mode_from_pipe_config(&crtc->base.mode,
- crtc->config);
- DRM_DEBUG_KMS("[CRTC:%d] found active mode: ",
- crtc->base.base.id);
- drm_mode_debug_printmodeline(&crtc->base.mode);
- }
+ state = intel_modeset_readout_hw_state(dev);
+ if (IS_ERR(state)) {
+ DRM_ERROR("Failed to read out hw state\n");
+ return;
}
+ drm_atomic_helper_swap_state(dev, state);
+
+ /* swap sw/hw dpll state */
+ intel_atomic_duplicate_dpll_state(dev_priv, shared_dplls);
+ intel_shared_dpll_commit(state);
+ memcpy(to_intel_atomic_state(state)->shared_dpll,
+ shared_dplls, sizeof(*shared_dplls) * dev_priv->num_shared_dpll);
+
/* HW state is read out, now we need to sanitize this mess. */
for_each_intel_encoder(dev, encoder) {
intel_sanitize_encoder(encoder);
}
- for_each_pipe(dev_priv, pipe) {
- crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
- intel_sanitize_crtc(crtc);
- intel_dump_pipe_config(crtc, crtc->config,
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+ /* prevent unnneeded restores with force_restore */
+ crtc_state->active_changed =
+ crtc_state->mode_changed =
+ crtc_state->planes_changed = false;
+
+ if (crtc->enabled) {
+ intel_mode_from_pipe_config(&crtc->state->mode,
+ to_intel_crtc_state(crtc->state));
+
+ drm_mode_copy(&crtc->mode, &crtc->state->mode);
+ drm_mode_copy(&crtc->hwmode,
+ &crtc->state->adjusted_mode);
+ }
+
+ intel_sanitize_crtc(intel_crtc);
+
+ /*
+ * sanitize_crtc may have forced an update of crtc->state,
+ * so reload in intel_dump_pipe_config
+ */
+ intel_dump_pipe_config(intel_crtc,
+ to_intel_crtc_state(crtc->state),
"[setup_hw_state]");
}
ilk_wm_get_hw_state(dev);
if (force_restore) {
- i915_redisable_vga(dev);
+ int ret;
- /*
- * We need to use raw interfaces for restoring state to avoid
- * checking (bogus) intermediate states.
- */
- for_each_pipe(dev_priv, pipe) {
- struct drm_crtc *crtc =
- dev_priv->pipe_to_crtc_mapping[pipe];
+ i915_redisable_vga(dev);
- intel_crtc_restore_mode(crtc);
+ ret = intel_set_mode(state);
+ if (ret) {
+ DRM_ERROR("Failed to restore previous mode\n");
+ drm_atomic_state_free(state);
}
} else {
- intel_modeset_update_staged_output_state(dev);
+ drm_atomic_state_free(state);
}
intel_modeset_check_state(dev);
to_intel_crtc(c)->pipe);
drm_framebuffer_unreference(c->primary->fb);
c->primary->fb = NULL;
+ c->primary->crtc = c->primary->state->crtc = NULL;
update_state_fb(c->primary);
+ c->state->plane_mask &= ~(1 << drm_plane_index(c->primary));
}
}
projects / deliverable / linux.git / blobdiff