{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
- if (HAS_PCH_SPLIT(dev))
+ if (IS_BROXTON(dev))
+ return BXT_PP_CONTROL(0);
+ else if (HAS_PCH_SPLIT(dev))
return PCH_PP_CONTROL;
else
return VLV_PIPE_PP_CONTROL(vlv_power_sequencer_pipe(intel_dp));
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
- if (HAS_PCH_SPLIT(dev))
+ if (IS_BROXTON(dev))
+ return BXT_PP_STATUS(0);
+ else if (HAS_PCH_SPLIT(dev))
return PCH_PP_STATUS;
else
return VLV_PIPE_PP_STATUS(vlv_power_sequencer_pipe(intel_dp));
if (INTEL_INFO(dev)->gen >= 9) {
int ret;
- ret = skl_update_scaler_users(intel_crtc, pipe_config, NULL, NULL, 0);
+ ret = skl_update_scaler_crtc(pipe_config, 0);
if (ret)
return ret;
}
lockdep_assert_held(&dev_priv->pps_mutex);
control = I915_READ(_pp_ctrl_reg(intel_dp));
- control &= ~PANEL_UNLOCK_MASK;
- control |= PANEL_UNLOCK_REGS;
+ if (!IS_BROXTON(dev)) {
+ control &= ~PANEL_UNLOCK_MASK;
+ control |= PANEL_UNLOCK_REGS;
+ }
return control;
}
}
}
-/* Gen7.5's (HSW) DP voltage swing and pre-emphasis control */
-static uint32_t
-hsw_signal_levels(uint8_t train_set)
-{
- int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
- DP_TRAIN_PRE_EMPHASIS_MASK);
- switch (signal_levels) {
- case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0:
- return DDI_BUF_TRANS_SELECT(0);
- case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1:
- return DDI_BUF_TRANS_SELECT(1);
- case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2:
- return DDI_BUF_TRANS_SELECT(2);
- case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_3:
- return DDI_BUF_TRANS_SELECT(3);
-
- case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0:
- return DDI_BUF_TRANS_SELECT(4);
- case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1:
- return DDI_BUF_TRANS_SELECT(5);
- case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_2:
- return DDI_BUF_TRANS_SELECT(6);
-
- case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0:
- return DDI_BUF_TRANS_SELECT(7);
- case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1:
- return DDI_BUF_TRANS_SELECT(8);
-
- case DP_TRAIN_VOLTAGE_SWING_LEVEL_3 | DP_TRAIN_PRE_EMPH_LEVEL_0:
- return DDI_BUF_TRANS_SELECT(9);
- default:
- DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
- "0x%x\n", signal_levels);
- return DDI_BUF_TRANS_SELECT(0);
- }
-}
-
-static void bxt_signal_levels(struct intel_dp *intel_dp)
-{
- struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
- enum port port = dport->port;
- struct drm_device *dev = dport->base.base.dev;
- struct intel_encoder *encoder = &dport->base;
- uint8_t train_set = intel_dp->train_set[0];
- uint32_t level = 0;
-
- int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
- DP_TRAIN_PRE_EMPHASIS_MASK);
- switch (signal_levels) {
- default:
- DRM_DEBUG_KMS("Unsupported voltage swing/pre-emph level\n");
- case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0:
- level = 0;
- break;
- case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1:
- level = 1;
- break;
- case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2:
- level = 2;
- break;
- case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_3:
- level = 3;
- break;
- case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0:
- level = 4;
- break;
- case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1:
- level = 5;
- break;
- case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_2:
- level = 6;
- break;
- case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0:
- level = 7;
- break;
- case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1:
- level = 8;
- break;
- case DP_TRAIN_VOLTAGE_SWING_LEVEL_3 | DP_TRAIN_PRE_EMPH_LEVEL_0:
- level = 9;
- break;
- }
-
- bxt_ddi_vswing_sequence(dev, level, port, encoder->type);
-}
-
/* Properly updates "DP" with the correct signal levels. */
static void
intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP)
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
enum port port = intel_dig_port->port;
struct drm_device *dev = intel_dig_port->base.base.dev;
- uint32_t signal_levels, mask;
+ uint32_t signal_levels, mask = 0;
uint8_t train_set = intel_dp->train_set[0];
- if (IS_BROXTON(dev)) {
- signal_levels = 0;
- bxt_signal_levels(intel_dp);
- mask = 0;
- } else if (HAS_DDI(dev)) {
- signal_levels = hsw_signal_levels(train_set);
- mask = DDI_BUF_EMP_MASK;
+ if (HAS_DDI(dev)) {
+ signal_levels = ddi_signal_levels(intel_dp);
+
+ if (IS_BROXTON(dev))
+ signal_levels = 0;
+ else
+ mask = DDI_BUF_EMP_MASK;
} else if (IS_CHERRYVIEW(dev)) {
signal_levels = chv_signal_levels(intel_dp);
- mask = 0;
} else if (IS_VALLEYVIEW(dev)) {
signal_levels = vlv_signal_levels(intel_dp);
- mask = 0;
} else if (IS_GEN7(dev) && port == PORT_A) {
signal_levels = gen7_edp_signal_levels(train_set);
mask = EDP_LINK_TRAIN_VOL_EMP_MASK_IVB;
struct drm_i915_private *dev_priv = dev->dev_private;
struct edp_power_seq cur, vbt, spec,
*final = &intel_dp->pps_delays;
- u32 pp_on, pp_off, pp_div, pp;
- int pp_ctrl_reg, pp_on_reg, pp_off_reg, pp_div_reg;
+ u32 pp_on, pp_off, pp_div = 0, pp_ctl = 0;
+ int pp_ctrl_reg, pp_on_reg, pp_off_reg, pp_div_reg = 0;
lockdep_assert_held(&dev_priv->pps_mutex);
if (final->t11_t12 != 0)
return;
- if (HAS_PCH_SPLIT(dev)) {
+ if (IS_BROXTON(dev)) {
+ /*
+ * TODO: BXT has 2 sets of PPS registers.
+ * Correct Register for Broxton need to be identified
+ * using VBT. hardcoding for now
+ */
+ pp_ctrl_reg = BXT_PP_CONTROL(0);
+ pp_on_reg = BXT_PP_ON_DELAYS(0);
+ pp_off_reg = BXT_PP_OFF_DELAYS(0);
+ } else if (HAS_PCH_SPLIT(dev)) {
pp_ctrl_reg = PCH_PP_CONTROL;
pp_on_reg = PCH_PP_ON_DELAYS;
pp_off_reg = PCH_PP_OFF_DELAYS;
/* Workaround: Need to write PP_CONTROL with the unlock key as
* the very first thing. */
- pp = ironlake_get_pp_control(intel_dp);
- I915_WRITE(pp_ctrl_reg, pp);
+ pp_ctl = ironlake_get_pp_control(intel_dp);
pp_on = I915_READ(pp_on_reg);
pp_off = I915_READ(pp_off_reg);
- pp_div = I915_READ(pp_div_reg);
+ if (!IS_BROXTON(dev)) {
+ I915_WRITE(pp_ctrl_reg, pp_ctl);
+ pp_div = I915_READ(pp_div_reg);
+ }
/* Pull timing values out of registers */
cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >>
cur.t10 = (pp_off & PANEL_POWER_DOWN_DELAY_MASK) >>
PANEL_POWER_DOWN_DELAY_SHIFT;
- cur.t11_t12 = ((pp_div & PANEL_POWER_CYCLE_DELAY_MASK) >>
+ if (IS_BROXTON(dev)) {
+ u16 tmp = (pp_ctl & BXT_POWER_CYCLE_DELAY_MASK) >>
+ BXT_POWER_CYCLE_DELAY_SHIFT;
+ if (tmp > 0)
+ cur.t11_t12 = (tmp - 1) * 1000;
+ else
+ cur.t11_t12 = 0;
+ } else {
+ cur.t11_t12 = ((pp_div & PANEL_POWER_CYCLE_DELAY_MASK) >>
PANEL_POWER_CYCLE_DELAY_SHIFT) * 1000;
+ }
DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
cur.t1_t3, cur.t8, cur.t9, cur.t10, cur.t11_t12);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp_on, pp_off, pp_div, port_sel = 0;
int div = HAS_PCH_SPLIT(dev) ? intel_pch_rawclk(dev) : intel_hrawclk(dev);
- int pp_on_reg, pp_off_reg, pp_div_reg;
+ int pp_on_reg, pp_off_reg, pp_div_reg = 0, pp_ctrl_reg;
enum port port = dp_to_dig_port(intel_dp)->port;
const struct edp_power_seq *seq = &intel_dp->pps_delays;
lockdep_assert_held(&dev_priv->pps_mutex);
- if (HAS_PCH_SPLIT(dev)) {
+ if (IS_BROXTON(dev)) {
+ /*
+ * TODO: BXT has 2 sets of PPS registers.
+ * Correct Register for Broxton need to be identified
+ * using VBT. hardcoding for now
+ */
+ pp_ctrl_reg = BXT_PP_CONTROL(0);
+ pp_on_reg = BXT_PP_ON_DELAYS(0);
+ pp_off_reg = BXT_PP_OFF_DELAYS(0);
+
+ } else if (HAS_PCH_SPLIT(dev)) {
pp_on_reg = PCH_PP_ON_DELAYS;
pp_off_reg = PCH_PP_OFF_DELAYS;
pp_div_reg = PCH_PP_DIVISOR;
(seq->t10 << PANEL_POWER_DOWN_DELAY_SHIFT);
/* Compute the divisor for the pp clock, simply match the Bspec
* formula. */
- pp_div = ((100 * div)/2 - 1) << PP_REFERENCE_DIVIDER_SHIFT;
- pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000)
- << PANEL_POWER_CYCLE_DELAY_SHIFT);
+ if (IS_BROXTON(dev)) {
+ pp_div = I915_READ(pp_ctrl_reg);
+ pp_div &= ~BXT_POWER_CYCLE_DELAY_MASK;
+ pp_div |= (DIV_ROUND_UP((seq->t11_t12 + 1), 1000)
+ << BXT_POWER_CYCLE_DELAY_SHIFT);
+ } else {
+ pp_div = ((100 * div)/2 - 1) << PP_REFERENCE_DIVIDER_SHIFT;
+ pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000)
+ << PANEL_POWER_CYCLE_DELAY_SHIFT);
+ }
/* Haswell doesn't have any port selection bits for the panel
* power sequencer any more. */
I915_WRITE(pp_on_reg, pp_on);
I915_WRITE(pp_off_reg, pp_off);
- I915_WRITE(pp_div_reg, pp_div);
+ if (IS_BROXTON(dev))
+ I915_WRITE(pp_ctrl_reg, pp_div);
+ else
+ I915_WRITE(pp_div_reg, pp_div);
DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n",
I915_READ(pp_on_reg),
I915_READ(pp_off_reg),
+ IS_BROXTON(dev) ?
+ (I915_READ(pp_ctrl_reg) & BXT_POWER_CYCLE_DELAY_MASK) :
I915_READ(pp_div_reg));
}
crtc = dp_to_dig_port(dev_priv->drrs.dp)->base.base.crtc;
pipe = to_intel_crtc(crtc)->pipe;
+ frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
+ dev_priv->drrs.busy_frontbuffer_bits |= frontbuffer_bits;
+
/* invalidate means busy screen hence upclock */
- if (dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) {
+ if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
intel_dp_set_drrs_state(dev_priv->dev,
dev_priv->drrs.dp->attached_connector->panel.
fixed_mode->vrefresh);
- }
- frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
-
- dev_priv->drrs.busy_frontbuffer_bits |= frontbuffer_bits;
mutex_unlock(&dev_priv->drrs.mutex);
}
crtc = dp_to_dig_port(dev_priv->drrs.dp)->base.base.crtc;
pipe = to_intel_crtc(crtc)->pipe;
+
+ frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
dev_priv->drrs.busy_frontbuffer_bits &= ~frontbuffer_bits;
/* flush means busy screen hence upclock */
- if (dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
+ if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
intel_dp_set_drrs_state(dev_priv->dev,
dev_priv->drrs.dp->attached_connector->panel.
fixed_mode->vrefresh);
projects / deliverable / linux.git / blobdiff