/*
- i2c-i801.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
<mdsxyz123@yahoo.com>
- Copyright (C) 2007 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2007, 2008 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
82801G (ICH7) 0x27da 32 hard yes yes yes
82801H (ICH8) 0x283e 32 hard yes yes yes
82801I (ICH9) 0x2930 32 hard yes yes yes
- Tolapai 0x5032 32 hard yes ? ?
+ Tolapai 0x5032 32 hard yes yes yes
+ ICH10 0x3a30 32 hard yes yes yes
+ ICH10 0x3a60 32 hard yes yes yes
+ PCH 0x3b30 32 hard yes yes yes
Features supported by this driver:
Software PEC no
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/i2c.h>
+#include <linux/acpi.h>
#include <asm/io.h>
/* I801 SMBus address offsets */
#define SMBHSTSTS_INTR 0x02
#define SMBHSTSTS_HOST_BUSY 0x01
+#define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_FAILED | \
+ SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | \
+ SMBHSTSTS_INTR)
+
static unsigned long i801_smba;
static unsigned char i801_original_hstcfg;
static struct pci_driver i801_driver;
#define FEATURE_I2C_BLOCK_READ (1 << 3)
static unsigned int i801_features;
-static int i801_transaction(int xact)
+/* Make sure the SMBus host is ready to start transmitting.
+ Return 0 if it is, -EBUSY if it is not. */
+static int i801_check_pre(void)
{
- int temp;
- int result = 0;
- int timeout = 0;
+ int status;
- dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
- inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
- inb_p(SMBHSTDAT1));
-
- /* Make sure the SMBus host is ready to start transmitting */
- /* 0x1f = Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
- if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
- dev_dbg(&I801_dev->dev, "SMBus busy (%02x). Resetting...\n",
- temp);
- outb_p(temp, SMBHSTSTS);
- if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
- dev_dbg(&I801_dev->dev, "Failed! (%02x)\n", temp);
- return -1;
- } else {
- dev_dbg(&I801_dev->dev, "Successful!\n");
+ status = inb_p(SMBHSTSTS);
+ if (status & SMBHSTSTS_HOST_BUSY) {
+ dev_err(&I801_dev->dev, "SMBus is busy, can't use it!\n");
+ return -EBUSY;
+ }
+
+ status &= STATUS_FLAGS;
+ if (status) {
+ dev_dbg(&I801_dev->dev, "Clearing status flags (%02x)\n",
+ status);
+ outb_p(status, SMBHSTSTS);
+ status = inb_p(SMBHSTSTS) & STATUS_FLAGS;
+ if (status) {
+ dev_err(&I801_dev->dev,
+ "Failed clearing status flags (%02x)\n",
+ status);
+ return -EBUSY;
}
}
- /* the current contents of SMBHSTCNT can be overwritten, since PEC,
- * INTREN, SMBSCMD are passed in xact */
- outb_p(xact | I801_START, SMBHSTCNT);
+ return 0;
+}
- /* We will always wait for a fraction of a second! */
- do {
- msleep(1);
- temp = inb_p(SMBHSTSTS);
- } while ((temp & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT));
+/* Convert the status register to an error code, and clear it. */
+static int i801_check_post(int status, int timeout)
+{
+ int result = 0;
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
- dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
- result = -1;
+ if (timeout) {
+ dev_err(&I801_dev->dev, "Transaction timeout\n");
/* try to stop the current command */
dev_dbg(&I801_dev->dev, "Terminating the current operation\n");
outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT);
msleep(1);
outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL), SMBHSTCNT);
- }
- if (temp & SMBHSTSTS_FAILED) {
- result = -1;
- dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n");
+ /* Check if it worked */
+ status = inb_p(SMBHSTSTS);
+ if ((status & SMBHSTSTS_HOST_BUSY) ||
+ !(status & SMBHSTSTS_FAILED))
+ dev_err(&I801_dev->dev,
+ "Failed terminating the transaction\n");
+ outb_p(STATUS_FLAGS, SMBHSTSTS);
+ return -ETIMEDOUT;
}
- if (temp & SMBHSTSTS_BUS_ERR) {
- result = -1;
- dev_err(&I801_dev->dev, "Bus collision! SMBus may be locked "
- "until next hard reset. (sorry!)\n");
- /* Clock stops and slave is stuck in mid-transmission */
+ if (status & SMBHSTSTS_FAILED) {
+ result = -EIO;
+ dev_err(&I801_dev->dev, "Transaction failed\n");
}
-
- if (temp & SMBHSTSTS_DEV_ERR) {
- result = -1;
- dev_dbg(&I801_dev->dev, "Error: no response!\n");
+ if (status & SMBHSTSTS_DEV_ERR) {
+ result = -ENXIO;
+ dev_dbg(&I801_dev->dev, "No response\n");
+ }
+ if (status & SMBHSTSTS_BUS_ERR) {
+ result = -EAGAIN;
+ dev_dbg(&I801_dev->dev, "Lost arbitration\n");
}
- if ((inb_p(SMBHSTSTS) & 0x1f) != 0x00)
- outb_p(inb(SMBHSTSTS), SMBHSTSTS);
-
- if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
- dev_dbg(&I801_dev->dev, "Failed reset at end of transaction "
- "(%02x)\n", temp);
+ if (result) {
+ /* Clear error flags */
+ outb_p(status & STATUS_FLAGS, SMBHSTSTS);
+ status = inb_p(SMBHSTSTS) & STATUS_FLAGS;
+ if (status) {
+ dev_warn(&I801_dev->dev, "Failed clearing status "
+ "flags at end of transaction (%02x)\n",
+ status);
+ }
}
- dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
- inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
- inb_p(SMBHSTDAT1));
+
return result;
}
+static int i801_transaction(int xact)
+{
+ int status;
+ int result;
+ int timeout = 0;
+
+ result = i801_check_pre();
+ if (result < 0)
+ return result;
+
+ /* the current contents of SMBHSTCNT can be overwritten, since PEC,
+ * INTREN, SMBSCMD are passed in xact */
+ outb_p(xact | I801_START, SMBHSTCNT);
+
+ /* We will always wait for a fraction of a second! */
+ do {
+ msleep(1);
+ status = inb_p(SMBHSTSTS);
+ } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT));
+
+ result = i801_check_post(status, timeout >= MAX_TIMEOUT);
+ if (result < 0)
+ return result;
+
+ outb_p(SMBHSTSTS_INTR, SMBHSTSTS);
+ return 0;
+}
+
/* wait for INTR bit as advised by Intel */
static void i801_wait_hwpec(void)
{
int timeout = 0;
- int temp;
+ int status;
do {
msleep(1);
- temp = inb_p(SMBHSTSTS);
- } while ((!(temp & SMBHSTSTS_INTR))
+ status = inb_p(SMBHSTSTS);
+ } while ((!(status & SMBHSTSTS_INTR))
&& (timeout++ < MAX_TIMEOUT));
if (timeout >= MAX_TIMEOUT) {
dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
}
- outb_p(temp, SMBHSTSTS);
+ outb_p(status, SMBHSTSTS);
}
static int i801_block_transaction_by_block(union i2c_smbus_data *data,
char read_write, int hwpec)
{
int i, len;
+ int status;
inb_p(SMBHSTCNT); /* reset the data buffer index */
outb_p(data->block[i+1], SMBBLKDAT);
}
- if (i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 |
- I801_PEC_EN * hwpec))
- return -1;
+ status = i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 |
+ I801_PEC_EN * hwpec);
+ if (status)
+ return status;
if (read_write == I2C_SMBUS_READ) {
len = inb_p(SMBHSTDAT0);
if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
- return -1;
+ return -EPROTO;
data->block[0] = len;
for (i = 0; i < len; i++)
{
int i, len;
int smbcmd;
- int temp;
- int result = 0;
+ int status;
+ int result;
int timeout;
- unsigned char errmask;
+
+ result = i801_check_pre();
+ if (result < 0)
+ return result;
len = data->block[0];
}
outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT);
- dev_dbg(&I801_dev->dev, "Block (pre %d): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i,
- inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
- inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT));
-
- /* Make sure the SMBus host is ready to start transmitting */
- temp = inb_p(SMBHSTSTS);
- if (i == 1) {
- /* Erroneous conditions before transaction:
- * Byte_Done, Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
- errmask = 0x9f;
- } else {
- /* Erroneous conditions during transaction:
- * Failed, Bus_Err, Dev_Err, Intr */
- errmask = 0x1e;
- }
- if (temp & errmask) {
- dev_dbg(&I801_dev->dev, "SMBus busy (%02x). "
- "Resetting...\n", temp);
- outb_p(temp, SMBHSTSTS);
- if (((temp = inb_p(SMBHSTSTS)) & errmask) != 0x00) {
- dev_err(&I801_dev->dev,
- "Reset failed! (%02x)\n", temp);
- return -1;
- }
- if (i != 1)
- /* if die in middle of block transaction, fail */
- return -1;
- }
-
if (i == 1)
outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT);
timeout = 0;
do {
msleep(1);
- temp = inb_p(SMBHSTSTS);
+ status = inb_p(SMBHSTSTS);
}
- while ((!(temp & SMBHSTSTS_BYTE_DONE))
+ while ((!(status & SMBHSTSTS_BYTE_DONE))
&& (timeout++ < MAX_TIMEOUT));
- /* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
- /* try to stop the current command */
- dev_dbg(&I801_dev->dev, "Terminating the current "
- "operation\n");
- outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT);
- msleep(1);
- outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL),
- SMBHSTCNT);
- result = -1;
- dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
- }
-
- if (temp & SMBHSTSTS_FAILED) {
- result = -1;
- dev_dbg(&I801_dev->dev,
- "Error: Failed bus transaction\n");
- } else if (temp & SMBHSTSTS_BUS_ERR) {
- result = -1;
- dev_err(&I801_dev->dev, "Bus collision!\n");
- } else if (temp & SMBHSTSTS_DEV_ERR) {
- result = -1;
- dev_dbg(&I801_dev->dev, "Error: no response!\n");
- }
+ result = i801_check_post(status, timeout >= MAX_TIMEOUT);
+ if (result < 0)
+ return result;
if (i == 1 && read_write == I2C_SMBUS_READ
&& command != I2C_SMBUS_I2C_BLOCK_DATA) {
len = inb_p(SMBHSTDAT0);
- if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
- return -1;
+ if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
+ dev_err(&I801_dev->dev,
+ "Illegal SMBus block read size %d\n",
+ len);
+ /* Recover */
+ while (inb_p(SMBHSTSTS) & SMBHSTSTS_HOST_BUSY)
+ outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS);
+ outb_p(SMBHSTSTS_INTR, SMBHSTSTS);
+ return -EPROTO;
+ }
data->block[0] = len;
}
data->block[i] = inb_p(SMBBLKDAT);
if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
outb_p(data->block[i+1], SMBBLKDAT);
- if ((temp & 0x9e) != 0x00)
- outb_p(temp, SMBHSTSTS); /* signals SMBBLKDAT ready */
- if ((temp = (0x1e & inb_p(SMBHSTSTS))) != 0x00) {
- dev_dbg(&I801_dev->dev,
- "Bad status (%02x) at end of transaction\n",
- temp);
- }
- dev_dbg(&I801_dev->dev, "Block (post %d): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i,
- inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
- inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT));
-
- if (result < 0)
- return result;
+ /* signals SMBBLKDAT ready */
+ outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS);
}
- return result;
+
+ return 0;
}
static int i801_set_block_buffer_mode(void)
{
outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_E32B, SMBAUXCTL);
if ((inb_p(SMBAUXCTL) & SMBAUXCTL_E32B) == 0)
- return -1;
+ return -EIO;
return 0;
}
} else if (!(i801_features & FEATURE_I2C_BLOCK_READ)) {
dev_err(&I801_dev->dev,
"I2C block read is unsupported!\n");
- return -1;
+ return -EOPNOTSUPP;
}
}
return result;
}
-/* Return -1 on error. */
+/* Return negative errno on error. */
static s32 i801_access(struct i2c_adapter * adap, u16 addr,
unsigned short flags, char read_write, u8 command,
int size, union i2c_smbus_data * data)
outb_p(command, SMBHSTCMD);
block = 1;
break;
- case I2C_SMBUS_PROC_CALL:
default:
dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size);
- return -1;
+ return -EOPNOTSUPP;
}
if (hwpec) /* enable/disable hardware PEC */
if(block)
return ret;
if(ret)
- return -1;
+ return ret;
if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
return 0;
static struct i2c_adapter i801_adapter = {
.owner = THIS_MODULE,
.id = I2C_HW_SMBUS_I801,
- .class = I2C_CLASS_HWMON,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_SMBUS) },
{ 0, }
};
case PCI_DEVICE_ID_INTEL_ESB2_17:
case PCI_DEVICE_ID_INTEL_ICH8_5:
case PCI_DEVICE_ID_INTEL_ICH9_6:
+ case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
+ case PCI_DEVICE_ID_INTEL_ICH10_4:
+ case PCI_DEVICE_ID_INTEL_ICH10_5:
+ case PCI_DEVICE_ID_INTEL_PCH_SMBUS:
i801_features |= FEATURE_I2C_BLOCK_READ;
/* fall through */
case PCI_DEVICE_ID_INTEL_82801DB_3:
- case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
i801_features |= FEATURE_SMBUS_PEC;
i801_features |= FEATURE_BLOCK_BUFFER;
break;
goto exit;
}
+ err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
+ if (err)
+ goto exit;
+
err = pci_request_region(dev, SMBBAR, i801_driver.name);
if (err) {
dev_err(&dev->dev, "Failed to request SMBus region "
projects / deliverable / linux.git / blobdiff