ide: keep pointer to struct device instead of struct pci_dev in ide_hwif_t

[deliverable/linux.git] / drivers / ide / pci / jmicron.c

diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
index 582b4cae2b5358ebb2b150e0b2a5ebefbd15df32..8b40f6479c55c9a694a6066766f8a0ab1c9d299f 100644 (file)
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -30,7 +30,7 @@ typedef enum {
 
 static u8 __devinit ata66_jmicron(ide_hwif_t *hwif)
 {
-       struct pci_dev *pdev = hwif->pci_dev;
+       struct pci_dev *pdev = to_pci_dev(hwif->dev);
 
        u32 control;
        u32 control5;
@@ -99,24 +99,6 @@ static void jmicron_set_dma_mode(ide_drive_t *drive, const u8 mode)
 {
 }
 
-/**
- *     jmicron_configure_drive_for_dma -       set up for DMA transfers
- *     @drive: drive we are going to set up
- *
- *     As the JMicron snoops for timings all we actually need to do is
- *     make sure we don't set an invalid mode.
- */
-
-static int jmicron_config_drive_for_dma (ide_drive_t *drive)
-{
-       if (ide_tune_dma(drive))
-               return 0;
-
-       ide_set_max_pio(drive);
-
-       return -1;
-}
-
 /**
  *     init_hwif_jmicron       -       set up hwif structs
  *     @hwif: interface to set up
@@ -129,37 +111,21 @@ static void __devinit init_hwif_jmicron(ide_hwif_t *hwif)
        hwif->set_pio_mode = &jmicron_set_pio_mode;
        hwif->set_dma_mode = &jmicron_set_dma_mode;
 
-       hwif->drives[0].autotune = 1;
-       hwif->drives[1].autotune = 1;
-
-       if (!hwif->dma_base)
-               goto fallback;
-
-       hwif->atapi_dma = 1;
-       hwif->ultra_mask = 0x7f;
-       hwif->mwdma_mask = 0x07;
-
-       hwif->ide_dma_check = &jmicron_config_drive_for_dma;
+       if (hwif->dma_base == 0)
+               return;
 
        if (hwif->cbl != ATA_CBL_PATA40_SHORT)
                hwif->cbl = ata66_jmicron(hwif);
-
-       hwif->autodma = 1;
-       hwif->drives[0].autodma = hwif->autodma;
-       hwif->drives[1].autodma = hwif->autodma;
-       return;
-fallback:
-       hwif->autodma = 0;
-       return;
 }
 
-static ide_pci_device_t jmicron_chipset __devinitdata = {
+static const struct ide_port_info jmicron_chipset __devinitdata = {
        .name           = "JMB",
        .init_hwif      = init_hwif_jmicron,
-       .autodma        = AUTODMA,
-       .bootable       = ON_BOARD,
+       .host_flags     = IDE_HFLAG_BOOTABLE,
        .enablebits     = { { 0x40, 0x01, 0x01 }, { 0x40, 0x10, 0x10 } },
        .pio_mask       = ATA_PIO5,
+       .mwdma_mask     = ATA_MWDMA2,
+       .udma_mask      = ATA_UDMA6,
 };
 
 /**
@@ -173,8 +139,7 @@ static ide_pci_device_t jmicron_chipset __devinitdata = {
 
 static int __devinit jmicron_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-       ide_setup_pci_device(dev, &jmicron_chipset);
-       return 0;
+       return ide_setup_pci_device(dev, &jmicron_chipset);
 }
 
 /* All JMB PATA controllers have and will continue to have the same