* but the code needs additional debugging.
*/
+#include <linux/blkdev.h>
+#include <linux/compiler.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/list.h>
-#include <linux/string.h>
-#include <linux/stringify.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/fs.h>
-#include <linux/poll.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/blkdev.h>
-#include <linux/smp_lock.h>
-#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/stat.h>
+#include <linux/string.h>
+#include <linux/stringify.h>
+#include <linux/types.h>
+#include <linux/wait.h>
-#include <asm/current.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
#include <asm/byteorder.h>
-#include <asm/atomic.h>
-#include <asm/system.h>
+#include <asm/errno.h>
+#include <asm/param.h>
#include <asm/scatterlist.h>
+#include <asm/system.h>
+#include <asm/types.h>
+
+#ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA
+#include <asm/io.h> /* for bus_to_virt */
+#endif
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_host.h>
#include "csr1212.h"
+#include "highlevel.h"
+#include "hosts.h"
#include "ieee1394.h"
-#include "ieee1394_types.h"
#include "ieee1394_core.h"
-#include "nodemgr.h"
-#include "hosts.h"
-#include "highlevel.h"
+#include "ieee1394_hotplug.h"
#include "ieee1394_transactions.h"
+#include "ieee1394_types.h"
+#include "nodemgr.h"
#include "sbp2.h"
/*
", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE)
", or a combination)");
-/* legacy parameter */
-static int force_inquiry_hack;
-module_param(force_inquiry_hack, int, 0644);
-MODULE_PARM_DESC(force_inquiry_hack, "Deprecated, use 'workarounds'");
-
/*
* Export information about protocols/devices supported by this driver.
*/
#define outstanding_orb_incr global_outstanding_command_orbs++
#define outstanding_orb_decr global_outstanding_command_orbs--
#else
-#define SBP2_ORB_DEBUG(fmt, args...)
-#define outstanding_orb_incr
-#define outstanding_orb_decr
+#define SBP2_ORB_DEBUG(fmt, args...) do {} while (0)
+#define outstanding_orb_incr do {} while (0)
+#define outstanding_orb_decr do {} while (0)
#endif
#ifdef CONFIG_IEEE1394_SBP2_DEBUG_DMA
--global_outstanding_dmas, ## args)
static u32 global_outstanding_dmas = 0;
#else
-#define SBP2_DMA_ALLOC(fmt, args...)
-#define SBP2_DMA_FREE(fmt, args...)
+#define SBP2_DMA_ALLOC(fmt, args...) do {} while (0)
+#define SBP2_DMA_FREE(fmt, args...) do {} while (0)
#endif
#if CONFIG_IEEE1394_SBP2_DEBUG >= 2
#define SBP2_NOTICE(fmt, args...) HPSB_NOTICE("sbp2: "fmt, ## args)
#define SBP2_WARN(fmt, args...) HPSB_WARN("sbp2: "fmt, ## args)
#else
-#define SBP2_DEBUG(fmt, args...)
+#define SBP2_DEBUG(fmt, args...) do {} while (0)
#define SBP2_INFO(fmt, args...) HPSB_INFO("sbp2: "fmt, ## args)
#define SBP2_NOTICE(fmt, args...) HPSB_NOTICE("sbp2: "fmt, ## args)
#define SBP2_WARN(fmt, args...) HPSB_WARN("sbp2: "fmt, ## args)
}
#else /* BIG_ENDIAN */
/* Why waste the cpu cycles? */
-#define sbp2util_be32_to_cpu_buffer(x,y)
-#define sbp2util_cpu_to_be32_buffer(x,y)
+#define sbp2util_be32_to_cpu_buffer(x,y) do {} while (0)
+#define sbp2util_cpu_to_be32_buffer(x,y) do {} while (0)
#endif
#ifdef CONFIG_IEEE1394_SBP2_PACKET_DUMP
return;
}
#else
-#define sbp2util_packet_dump(w,x,y,z)
+#define sbp2util_packet_dump(w,x,y,z) do {} while (0)
#endif
+static DECLARE_WAIT_QUEUE_HEAD(access_wq);
+
/*
- * Goofy routine that basically does a down_timeout function.
+ * Waits for completion of an SBP-2 access request.
+ * Returns nonzero if timed out or prematurely interrupted.
*/
-static int sbp2util_down_timeout(atomic_t *done, int timeout)
+static int sbp2util_access_timeout(struct scsi_id_instance_data *scsi_id,
+ int timeout)
{
- int i;
+ long leftover = wait_event_interruptible_timeout(
+ access_wq, scsi_id->access_complete, timeout);
- for (i = timeout; (i > 0 && atomic_read(done) == 0); i-= HZ/10) {
- if (msleep_interruptible(100)) /* 100ms */
- return 1;
- }
- return (i > 0) ? 0 : 1;
+ scsi_id->access_complete = 0;
+ return leftover <= 0;
}
-/* Free's an allocated packet */
+/* Frees an allocated packet */
static void sbp2_free_packet(struct hpsb_packet *packet)
{
hpsb_free_tlabel(packet);
return 0;
}
+static void sbp2util_notify_fetch_agent(struct scsi_id_instance_data *scsi_id,
+ u64 offset, quadlet_t *data, size_t len)
+{
+ /*
+ * There is a small window after a bus reset within which the node
+ * entry's generation is current but the reconnect wasn't completed.
+ */
+ if (unlikely(atomic_read(&scsi_id->state) == SBP2LU_STATE_IN_RESET))
+ return;
+
+ if (hpsb_node_write(scsi_id->ne,
+ scsi_id->sbp2_command_block_agent_addr + offset,
+ data, len))
+ SBP2_ERR("sbp2util_notify_fetch_agent failed.");
+ /*
+ * Now accept new SCSI commands, unless a bus reset happended during
+ * hpsb_node_write.
+ */
+ if (likely(atomic_read(&scsi_id->state) != SBP2LU_STATE_IN_RESET))
+ scsi_unblock_requests(scsi_id->scsi_host);
+}
+
+static void sbp2util_write_orb_pointer(struct work_struct *work)
+{
+ struct scsi_id_instance_data *scsi_id =
+ container_of(work, struct scsi_id_instance_data,
+ protocol_work.work);
+ quadlet_t data[2];
+
+ data[0] = ORB_SET_NODE_ID(scsi_id->hi->host->node_id);
+ data[1] = scsi_id->last_orb_dma;
+ sbp2util_cpu_to_be32_buffer(data, 8);
+ sbp2util_notify_fetch_agent(scsi_id, SBP2_ORB_POINTER_OFFSET, data, 8);
+}
+
+static void sbp2util_write_doorbell(struct work_struct *work)
+{
+ struct scsi_id_instance_data *scsi_id =
+ container_of(work, struct scsi_id_instance_data,
+ protocol_work.work);
+ sbp2util_notify_fetch_agent(scsi_id, SBP2_DOORBELL_OFFSET, NULL, 4);
+}
+
/*
* This function is called to create a pool of command orbs used for
* command processing. It is called when a new sbp2 device is detected.
command->command_orb_dma =
pci_map_single(hi->host->pdev, &command->command_orb,
sizeof(struct sbp2_command_orb),
- PCI_DMA_BIDIRECTIONAL);
+ PCI_DMA_TODEVICE);
SBP2_DMA_ALLOC("single command orb DMA");
command->sge_dma =
pci_map_single(hi->host->pdev,
/* Release our generic DMA's */
pci_unmap_single(host->pdev, command->command_orb_dma,
sizeof(struct sbp2_command_orb),
- PCI_DMA_BIDIRECTIONAL);
+ PCI_DMA_TODEVICE);
SBP2_DMA_FREE("single command orb DMA");
pci_unmap_single(host->pdev, command->sge_dma,
sizeof(command->scatter_gather_element),
sbp2scsi_complete_all_commands(scsi_id, DID_NO_CONNECT);
/* scsi_remove_device() will trigger shutdown functions of SCSI
* highlevel drivers which would deadlock if blocked. */
+ atomic_set(&scsi_id->state, SBP2LU_STATE_IN_SHUTDOWN);
scsi_unblock_requests(scsi_id->scsi_host);
}
sdev = scsi_id->sdev;
*/
sbp2scsi_complete_all_commands(scsi_id, DID_BUS_BUSY);
- /* Make sure we unblock requests (since this is likely after a bus
- * reset). */
- scsi_unblock_requests(scsi_id->scsi_host);
-
+ /* Accept new commands unless there was another bus reset in the
+ * meantime. */
+ if (hpsb_node_entry_valid(scsi_id->ne)) {
+ atomic_set(&scsi_id->state, SBP2LU_STATE_RUNNING);
+ scsi_unblock_requests(scsi_id->scsi_host);
+ }
return 0;
}
scsi_id->speed_code = IEEE1394_SPEED_100;
scsi_id->max_payload_size = sbp2_speedto_max_payload[IEEE1394_SPEED_100];
scsi_id->status_fifo_addr = CSR1212_INVALID_ADDR_SPACE;
- atomic_set(&scsi_id->sbp2_login_complete, 0);
INIT_LIST_HEAD(&scsi_id->sbp2_command_orb_inuse);
INIT_LIST_HEAD(&scsi_id->sbp2_command_orb_completed);
INIT_LIST_HEAD(&scsi_id->scsi_list);
spin_lock_init(&scsi_id->sbp2_command_orb_lock);
+ atomic_set(&scsi_id->state, SBP2LU_STATE_RUNNING);
+ INIT_DELAYED_WORK(&scsi_id->protocol_work, NULL);
ud->device.driver_data = scsi_id;
struct scsi_id_instance_data *scsi_id;
hi = hpsb_get_hostinfo(&sbp2_highlevel, host);
-
- if (hi) {
- list_for_each_entry(scsi_id, &hi->scsi_ids, scsi_list)
+ if (!hi)
+ return;
+ list_for_each_entry(scsi_id, &hi->scsi_ids, scsi_list)
+ if (likely(atomic_read(&scsi_id->state) !=
+ SBP2LU_STATE_IN_SHUTDOWN)) {
+ atomic_set(&scsi_id->state, SBP2LU_STATE_IN_RESET);
scsi_block_requests(scsi_id->scsi_host);
- }
+ }
}
/*
* connected to the sbp2 device being removed. That host would
* have a certain amount of time to relogin before the sbp2 device
* allows someone else to login instead. One second makes sense. */
- msleep_interruptible(1000);
- if (signal_pending(current)) {
+ if (msleep_interruptible(1000)) {
sbp2_remove_device(scsi_id);
return -EINTR;
}
scsi_remove_host(scsi_id->scsi_host);
scsi_host_put(scsi_id->scsi_host);
}
-
+ flush_scheduled_work();
sbp2util_remove_command_orb_pool(scsi_id);
list_del(&scsi_id->scsi_list);
"sbp2 query logins orb", scsi_id->query_logins_orb_dma);
memset(scsi_id->query_logins_response, 0, sizeof(struct sbp2_query_logins_response));
- memset(&scsi_id->status_block, 0, sizeof(struct sbp2_status_block));
data[0] = ORB_SET_NODE_ID(hi->host->node_id);
data[1] = scsi_id->query_logins_orb_dma;
sbp2util_cpu_to_be32_buffer(data, 8);
- atomic_set(&scsi_id->sbp2_login_complete, 0);
-
hpsb_node_write(scsi_id->ne, scsi_id->sbp2_management_agent_addr, data, 8);
- if (sbp2util_down_timeout(&scsi_id->sbp2_login_complete, 2*HZ)) {
+ if (sbp2util_access_timeout(scsi_id, 2*HZ)) {
SBP2_INFO("Error querying logins to SBP-2 device - timed out");
return -EIO;
}
return -EIO;
}
- if (STATUS_GET_RESP(scsi_id->status_block.ORB_offset_hi_misc) ||
- STATUS_GET_DEAD_BIT(scsi_id->status_block.ORB_offset_hi_misc) ||
- STATUS_GET_SBP_STATUS(scsi_id->status_block.ORB_offset_hi_misc)) {
-
- SBP2_INFO("Error querying logins to SBP-2 device - timed out");
+ if (STATUS_TEST_RDS(scsi_id->status_block.ORB_offset_hi_misc)) {
+ SBP2_INFO("Error querying logins to SBP-2 device - failed");
return -EIO;
}
"sbp2 login orb", scsi_id->login_orb_dma);
memset(scsi_id->login_response, 0, sizeof(struct sbp2_login_response));
- memset(&scsi_id->status_block, 0, sizeof(struct sbp2_status_block));
data[0] = ORB_SET_NODE_ID(hi->host->node_id);
data[1] = scsi_id->login_orb_dma;
sbp2util_cpu_to_be32_buffer(data, 8);
- atomic_set(&scsi_id->sbp2_login_complete, 0);
-
hpsb_node_write(scsi_id->ne, scsi_id->sbp2_management_agent_addr, data, 8);
/*
* Wait for login status (up to 20 seconds)...
*/
- if (sbp2util_down_timeout(&scsi_id->sbp2_login_complete, 20*HZ)) {
- SBP2_ERR("Error logging into SBP-2 device - login timed-out");
+ if (sbp2util_access_timeout(scsi_id, 20*HZ)) {
+ SBP2_ERR("Error logging into SBP-2 device - timed out");
return -EIO;
}
* Sanity. Make sure status returned matches login orb.
*/
if (scsi_id->status_block.ORB_offset_lo != scsi_id->login_orb_dma) {
- SBP2_ERR("Error logging into SBP-2 device - login timed-out");
+ SBP2_ERR("Error logging into SBP-2 device - timed out");
return -EIO;
}
- /*
- * Check status
- */
- if (STATUS_GET_RESP(scsi_id->status_block.ORB_offset_hi_misc) ||
- STATUS_GET_DEAD_BIT(scsi_id->status_block.ORB_offset_hi_misc) ||
- STATUS_GET_SBP_STATUS(scsi_id->status_block.ORB_offset_hi_misc)) {
-
- SBP2_ERR("Error logging into SBP-2 device - login failed");
+ if (STATUS_TEST_RDS(scsi_id->status_block.ORB_offset_hi_misc)) {
+ SBP2_ERR("Error logging into SBP-2 device - failed");
return -EIO;
}
scsi_id->sbp2_command_block_agent_addr &= 0x0000ffffffffffffULL;
SBP2_INFO("Logged into SBP-2 device");
-
return 0;
-
}
/*
data[1] = scsi_id->logout_orb_dma;
sbp2util_cpu_to_be32_buffer(data, 8);
- atomic_set(&scsi_id->sbp2_login_complete, 0);
-
error = hpsb_node_write(scsi_id->ne,
scsi_id->sbp2_management_agent_addr, data, 8);
if (error)
return error;
/* Wait for device to logout...1 second. */
- if (sbp2util_down_timeout(&scsi_id->sbp2_login_complete, HZ))
+ if (sbp2util_access_timeout(scsi_id, HZ))
return -EIO;
SBP2_INFO("Logged out of SBP-2 device");
-
return 0;
-
}
/*
sbp2util_packet_dump(scsi_id->reconnect_orb, sizeof(struct sbp2_reconnect_orb),
"sbp2 reconnect orb", scsi_id->reconnect_orb_dma);
- /*
- * Initialize status fifo
- */
- memset(&scsi_id->status_block, 0, sizeof(struct sbp2_status_block));
-
- /*
- * Ok, let's write to the target's management agent register
- */
data[0] = ORB_SET_NODE_ID(hi->host->node_id);
data[1] = scsi_id->reconnect_orb_dma;
sbp2util_cpu_to_be32_buffer(data, 8);
- atomic_set(&scsi_id->sbp2_login_complete, 0);
-
error = hpsb_node_write(scsi_id->ne,
scsi_id->sbp2_management_agent_addr, data, 8);
if (error)
/*
* Wait for reconnect status (up to 1 second)...
*/
- if (sbp2util_down_timeout(&scsi_id->sbp2_login_complete, HZ)) {
- SBP2_ERR("Error reconnecting to SBP-2 device - reconnect timed-out");
+ if (sbp2util_access_timeout(scsi_id, HZ)) {
+ SBP2_ERR("Error reconnecting to SBP-2 device - timed out");
return -EIO;
}
* Sanity. Make sure status returned matches reconnect orb.
*/
if (scsi_id->status_block.ORB_offset_lo != scsi_id->reconnect_orb_dma) {
- SBP2_ERR("Error reconnecting to SBP-2 device - reconnect timed-out");
+ SBP2_ERR("Error reconnecting to SBP-2 device - timed out");
return -EIO;
}
- /*
- * Check status
- */
- if (STATUS_GET_RESP(scsi_id->status_block.ORB_offset_hi_misc) ||
- STATUS_GET_DEAD_BIT(scsi_id->status_block.ORB_offset_hi_misc) ||
- STATUS_GET_SBP_STATUS(scsi_id->status_block.ORB_offset_hi_misc)) {
-
- SBP2_ERR("Error reconnecting to SBP-2 device - reconnect failed");
+ if (STATUS_TEST_RDS(scsi_id->status_block.ORB_offset_hi_misc)) {
+ SBP2_ERR("Error reconnecting to SBP-2 device - failed");
return -EIO;
}
HPSB_DEBUG("Reconnected to SBP-2 device");
-
return 0;
-
}
/*
}
workarounds = sbp2_default_workarounds;
- if (force_inquiry_hack) {
- SBP2_WARN("force_inquiry_hack is deprecated. "
- "Use parameter 'workarounds' instead.");
- workarounds |= SBP2_WORKAROUND_INQUIRY_36;
- }
if (!(workarounds & SBP2_WORKAROUND_OVERRIDE))
for (i = 0; i < ARRAY_SIZE(sbp2_workarounds_table); i++) {
SBP2_DEBUG_ENTER();
+ cancel_delayed_work(&scsi_id->protocol_work);
+ if (wait)
+ flush_scheduled_work();
+
data = ntohl(SBP2_AGENT_RESET_DATA);
addr = scsi_id->sbp2_command_block_agent_addr + SBP2_AGENT_RESET_OFFSET;
/*
* This function is called in order to begin a regular SBP-2 command.
*/
-static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
+static void sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
struct sbp2_command_info *command)
{
struct sbp2scsi_host_info *hi = scsi_id->hi;
pci_dma_sync_single_for_device(hi->host->pdev, command->command_orb_dma,
sizeof(struct sbp2_command_orb),
- PCI_DMA_BIDIRECTIONAL);
+ PCI_DMA_TODEVICE);
pci_dma_sync_single_for_device(hi->host->pdev, command->sge_dma,
sizeof(command->scatter_gather_element),
PCI_DMA_BIDIRECTIONAL);
*/
pci_dma_sync_single_for_cpu(hi->host->pdev, last_orb_dma,
sizeof(struct sbp2_command_orb),
- PCI_DMA_BIDIRECTIONAL);
+ PCI_DMA_TODEVICE);
last_orb->next_ORB_lo = cpu_to_be32(command->command_orb_dma);
wmb();
/* Tells hardware that this pointer is valid */
last_orb->next_ORB_hi = 0;
pci_dma_sync_single_for_device(hi->host->pdev, last_orb_dma,
sizeof(struct sbp2_command_orb),
- PCI_DMA_BIDIRECTIONAL);
+ PCI_DMA_TODEVICE);
addr += SBP2_DOORBELL_OFFSET;
data[0] = 0;
length = 4;
SBP2_ORB_DEBUG("write to %s register, command orb %p",
last_orb ? "DOORBELL" : "ORB_POINTER", command_orb);
- if (sbp2util_node_write_no_wait(scsi_id->ne, addr, data, length) < 0) {
- SBP2_ERR("sbp2util_node_write_no_wait failed.\n");
- return -EIO;
+ if (sbp2util_node_write_no_wait(scsi_id->ne, addr, data, length)) {
+ /*
+ * sbp2util_node_write_no_wait failed. We certainly ran out
+ * of transaction labels, perhaps just because there were no
+ * context switches which gave khpsbpkt a chance to collect
+ * free tlabels. Try again in non-atomic context. If necessary,
+ * the workqueue job will sleep to guaranteedly get a tlabel.
+ * We do not accept new commands until the job is over.
+ */
+ scsi_block_requests(scsi_id->scsi_host);
+ PREPARE_DELAYED_WORK(&scsi_id->protocol_work,
+ last_orb ? sbp2util_write_doorbell:
+ sbp2util_write_orb_pointer);
+ schedule_delayed_work(&scsi_id->protocol_work, 0);
}
- return 0;
}
/*
sbp2util_packet_dump(&command->command_orb, sizeof(struct sbp2_command_orb),
"sbp2 command orb", command->command_orb_dma);
- /*
- * Initialize status fifo
- */
- memset(&scsi_id->status_block, 0, sizeof(struct sbp2_status_block));
-
/*
* Link up the orb, and ring the doorbell if needed
*/
/*
* This function deals with status writes from the SBP-2 device
*/
-static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int destid,
- quadlet_t *data, u64 addr, size_t length, u16 fl)
+static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid,
+ int destid, quadlet_t *data, u64 addr,
+ size_t length, u16 fl)
{
struct sbp2scsi_host_info *hi;
struct scsi_id_instance_data *scsi_id = NULL, *scsi_id_tmp;
struct scsi_cmnd *SCpnt = NULL;
+ struct sbp2_status_block *sb;
u32 scsi_status = SBP2_SCSI_STATUS_GOOD;
struct sbp2_command_info *command;
unsigned long flags;
sbp2util_packet_dump(data, length, "sbp2 status write by device", (u32)addr);
- if (!host) {
+ if (unlikely(length < 8 || length > sizeof(struct sbp2_status_block))) {
+ SBP2_ERR("Wrong size of status block");
+ return RCODE_ADDRESS_ERROR;
+ }
+ if (unlikely(!host)) {
SBP2_ERR("host is NULL - this is bad!");
return RCODE_ADDRESS_ERROR;
}
-
hi = hpsb_get_hostinfo(&sbp2_highlevel, host);
-
- if (!hi) {
+ if (unlikely(!hi)) {
SBP2_ERR("host info is NULL - this is bad!");
return RCODE_ADDRESS_ERROR;
}
-
/*
* Find our scsi_id structure by looking at the status fifo address
* written to by the sbp2 device.
break;
}
}
-
- if (!scsi_id) {
+ if (unlikely(!scsi_id)) {
SBP2_ERR("scsi_id is NULL - device is gone?");
return RCODE_ADDRESS_ERROR;
}
/*
- * Put response into scsi_id status fifo...
- */
- memcpy(&scsi_id->status_block, data, length);
-
- /*
- * Byte swap first two quadlets (8 bytes) of status for processing
+ * Put response into scsi_id status fifo buffer. The first two bytes
+ * come in big endian bit order. Often the target writes only a
+ * truncated status block, minimally the first two quadlets. The rest
+ * is implied to be zeros.
*/
- sbp2util_be32_to_cpu_buffer(&scsi_id->status_block, 8);
+ sb = &scsi_id->status_block;
+ memset(sb->command_set_dependent, 0, sizeof(sb->command_set_dependent));
+ memcpy(sb, data, length);
+ sbp2util_be32_to_cpu_buffer(sb, 8);
/*
- * Handle command ORB status here if necessary. First, need to match status with command.
+ * Ignore unsolicited status. Handle command ORB status.
*/
- command = sbp2util_find_command_for_orb(scsi_id, scsi_id->status_block.ORB_offset_lo);
+ if (unlikely(STATUS_GET_SRC(sb->ORB_offset_hi_misc) == 2))
+ command = NULL;
+ else
+ command = sbp2util_find_command_for_orb(scsi_id,
+ sb->ORB_offset_lo);
if (command) {
-
SBP2_DEBUG("Found status for command ORB");
pci_dma_sync_single_for_cpu(hi->host->pdev, command->command_orb_dma,
sizeof(struct sbp2_command_orb),
- PCI_DMA_BIDIRECTIONAL);
+ PCI_DMA_TODEVICE);
pci_dma_sync_single_for_cpu(hi->host->pdev, command->sge_dma,
sizeof(command->scatter_gather_element),
PCI_DMA_BIDIRECTIONAL);
outstanding_orb_decr;
/*
- * Matched status with command, now grab scsi command pointers and check status
+ * Matched status with command, now grab scsi command pointers
+ * and check status.
+ */
+ /*
+ * FIXME: If the src field in the status is 1, the ORB DMA must
+ * not be reused until status for a subsequent ORB is received.
*/
SCpnt = command->Current_SCpnt;
spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
if (SCpnt) {
-
+ u32 h = sb->ORB_offset_hi_misc;
+ u32 r = STATUS_GET_RESP(h);
+
+ if (r != RESP_STATUS_REQUEST_COMPLETE) {
+ SBP2_WARN("resp 0x%x, sbp_status 0x%x",
+ r, STATUS_GET_SBP_STATUS(h));
+ scsi_status =
+ r == RESP_STATUS_TRANSPORT_FAILURE ?
+ SBP2_SCSI_STATUS_BUSY :
+ SBP2_SCSI_STATUS_COMMAND_TERMINATED;
+ }
/*
- * See if the target stored any scsi status information
+ * See if the target stored any scsi status information.
*/
- if (STATUS_GET_LENGTH(scsi_id->status_block.ORB_offset_hi_misc) > 1) {
- /*
- * Translate SBP-2 status to SCSI sense data
- */
+ if (STATUS_GET_LEN(h) > 1) {
SBP2_DEBUG("CHECK CONDITION");
- scsi_status = sbp2_status_to_sense_data((unchar *)&scsi_id->status_block, SCpnt->sense_buffer);
+ scsi_status = sbp2_status_to_sense_data(
+ (unchar *)sb, SCpnt->sense_buffer);
}
-
/*
- * Check to see if the dead bit is set. If so, we'll have to initiate
- * a fetch agent reset.
+ * Check to see if the dead bit is set. If so, we'll
+ * have to initiate a fetch agent reset.
*/
- if (STATUS_GET_DEAD_BIT(scsi_id->status_block.ORB_offset_hi_misc)) {
-
- /*
- * Initiate a fetch agent reset.
- */
- SBP2_DEBUG("Dead bit set - initiating fetch agent reset");
+ if (STATUS_TEST_DEAD(h)) {
+ SBP2_DEBUG("Dead bit set - "
+ "initiating fetch agent reset");
sbp2_agent_reset(scsi_id, 0);
}
-
SBP2_ORB_DEBUG("completing command orb %p", &command->command_orb);
}
spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
} else {
-
/*
* It's probably a login/logout/reconnect status.
*/
- if ((scsi_id->login_orb_dma == scsi_id->status_block.ORB_offset_lo) ||
- (scsi_id->query_logins_orb_dma == scsi_id->status_block.ORB_offset_lo) ||
- (scsi_id->reconnect_orb_dma == scsi_id->status_block.ORB_offset_lo) ||
- (scsi_id->logout_orb_dma == scsi_id->status_block.ORB_offset_lo)) {
- atomic_set(&scsi_id->sbp2_login_complete, 1);
+ if ((sb->ORB_offset_lo == scsi_id->reconnect_orb_dma) ||
+ (sb->ORB_offset_lo == scsi_id->login_orb_dma) ||
+ (sb->ORB_offset_lo == scsi_id->query_logins_orb_dma) ||
+ (sb->ORB_offset_lo == scsi_id->logout_orb_dma)) {
+ scsi_id->access_complete = 1;
+ wake_up_interruptible(&access_wq);
}
}
if (SCpnt) {
-
- /* Complete the SCSI command. */
SBP2_DEBUG("Completing SCSI command");
sbp2scsi_complete_command(scsi_id, scsi_status, SCpnt,
command->Current_done);
command = list_entry(lh, struct sbp2_command_info, list);
pci_dma_sync_single_for_cpu(hi->host->pdev, command->command_orb_dma,
sizeof(struct sbp2_command_orb),
- PCI_DMA_BIDIRECTIONAL);
+ PCI_DMA_TODEVICE);
pci_dma_sync_single_for_cpu(hi->host->pdev, command->sge_dma,
sizeof(command->scatter_gather_element),
PCI_DMA_BIDIRECTIONAL);
(struct scsi_id_instance_data *)sdev->host->hostdata[0];
scsi_id->sdev = sdev;
+ sdev->allow_restart = 1;
if (scsi_id->workarounds & SBP2_WORKAROUND_INQUIRY_36)
sdev->inquiry_len = 36;
blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
sdev->use_10_for_rw = 1;
- sdev->use_10_for_ms = 1;
if (sdev->type == TYPE_DISK &&
scsi_id->workarounds & SBP2_WORKAROUND_MODE_SENSE_8)
sdev->skip_ms_page_8 = 1;
if (scsi_id->workarounds & SBP2_WORKAROUND_FIX_CAPACITY)
sdev->fix_capacity = 1;
- if (scsi_id->ne->guid_vendor_id == 0x0010b9 && /* Maxtor's OUI */
- (sdev->type == TYPE_DISK || sdev->type == TYPE_RBC))
- sdev->allow_restart = 1;
return 0;
}
pci_dma_sync_single_for_cpu(hi->host->pdev,
command->command_orb_dma,
sizeof(struct sbp2_command_orb),
- PCI_DMA_BIDIRECTIONAL);
+ PCI_DMA_TODEVICE);
pci_dma_sync_single_for_cpu(hi->host->pdev,
command->sge_dma,
sizeof(command->scatter_gather_element),
/*
* Initiate a fetch agent reset.
*/
- sbp2_agent_reset(scsi_id, 0);
+ sbp2_agent_reset(scsi_id, 1);
sbp2scsi_complete_all_commands(scsi_id, DID_BUS_BUSY);
}
if (sbp2util_node_is_available(scsi_id)) {
SBP2_ERR("Generating sbp2 fetch agent reset");
- sbp2_agent_reset(scsi_id, 0);
+ sbp2_agent_reset(scsi_id, 1);
}
return SUCCESS;