# Encoder / Decoder module configuration
#
-menu "Encoders/decoders and other helper chips"
+menu "Encoders, decoders, sensors and other helper chips"
visible if !VIDEO_HELPER_CHIPS_AUTO
-comment "Audio decoders"
+comment "Audio decoders, processors and mixers"
config VIDEO_TVAUDIO
tristate "Simple audio decoder chips"
To compile this driver as a module, choose M here: the
module will be called cs53l32a.
-config VIDEO_M52790
- tristate "Mitsubishi M52790 A/V switch"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the Mitsubishi M52790 A/V switch.
-
- To compile this driver as a module, choose M here: the
- module will be called m52790.
-
config VIDEO_TLV320AIC23B
tristate "Texas Instruments TLV320AIC23B audio codec"
depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
To compile this driver as a module, choose M here: the
module will be called ks0127.
-config VIDEO_OV7670
- tristate "OmniVision OV7670 sensor support"
- depends on I2C && VIDEO_V4L2
- ---help---
- This is a Video4Linux2 sensor-level driver for the OmniVision
- OV7670 VGA camera. It currently only works with the M88ALP01
- controller.
-
-config VIDEO_MT9V011
- tristate "Micron mt9v011 sensor support"
- depends on I2C && VIDEO_V4L2
- ---help---
- This is a Video4Linux2 sensor-level driver for the Micron
- mt0v011 1.3 Mpixel camera. It currently only works with the
- em28xx driver.
-
-config VIDEO_TCM825X
- tristate "TCM825x camera sensor support"
- depends on I2C && VIDEO_V4L2
- ---help---
- This is a driver for the Toshiba TCM825x VGA camera sensor.
- It is used for example in Nokia N800.
-
config VIDEO_SAA7110
tristate "Philips SAA7110 video decoder"
depends on VIDEO_V4L2 && I2C
To compile this driver as a module, choose M here: the
module will be called saa7115.
-config VIDEO_SAA717X
- tristate "Philips SAA7171/3/4 audio/video decoders"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the Philips SAA7171/3/4 audio/video decoders.
-
- To compile this driver as a module, choose M here: the
- module will be called saa717x.
-
config VIDEO_SAA7191
tristate "Philips SAA7191 video decoder"
depends on VIDEO_V4L2 && I2C
comment "Video and audio decoders"
+config VIDEO_SAA717X
+ tristate "Philips SAA7171/3/4 audio/video decoders"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ Support for the Philips SAA7171/3/4 audio/video decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa717x.
+
source "drivers/media/video/cx25840/Kconfig"
comment "MPEG video encoders"
To compile this driver as a module, choose M here: the
module will be called adv7175.
-config VIDEO_THS7303
- tristate "THS7303 Video Amplifier"
- depends on I2C
- help
- Support for TI THS7303 video amplifier
-
- To compile this driver as a module, choose M here: the
- module will be called ths7303.
-
config VIDEO_ADV7343
tristate "ADV7343 video encoder"
depends on I2C
help
Video output driver for AKM AK8813 and AK8814 TV encoders
+comment "Camera sensor devices"
+
+config VIDEO_OV7670
+ tristate "OmniVision OV7670 sensor support"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the OmniVision
+ OV7670 VGA camera. It currently only works with the M88ALP01
+ controller.
+
+config VIDEO_MT9V011
+ tristate "Micron mt9v011 sensor support"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the Micron
+ mt0v011 1.3 Mpixel camera. It currently only works with the
+ em28xx driver.
+
+config VIDEO_MT9V032
+ tristate "Micron MT9V032 sensor support"
+ depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the Micron
+ MT9V032 752x480 CMOS sensor.
+
+config VIDEO_TCM825X
+ tristate "TCM825x camera sensor support"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ This is a driver for the Toshiba TCM825x VGA camera sensor.
+ It is used for example in Nokia N800.
+
+comment "Flash devices"
+
+config VIDEO_ADP1653
+ tristate "ADP1653 flash support"
+ depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+ ---help---
+ This is a driver for the ADP1653 flash controller. It is used for
+ example in Nokia N900.
+
comment "Video improvement chips"
config VIDEO_UPD64031A
To compile this driver as a module, choose M here: the
module will be called upd64083.
+comment "Miscelaneous helper chips"
+
+config VIDEO_THS7303
+ tristate "THS7303 Video Amplifier"
+ depends on I2C
+ help
+ Support for TI THS7303 video amplifier
+
+ To compile this driver as a module, choose M here: the
+ module will be called ths7303.
+
+config VIDEO_M52790
+ tristate "Mitsubishi M52790 A/V switch"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ Support for the Mitsubishi M52790 A/V switch.
+
+ To compile this driver as a module, choose M here: the
+ module will be called m52790.
+
endmenu # encoder / decoder chips
config VIDEO_SH_VOU
config VIDEO_TIMBERDALE
tristate "Support for timberdale Video In/LogiWIN"
- depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_V4L2 && I2C && DMADEVICES
select DMA_ENGINE
select TIMB_DMA
select VIDEO_ADV7180
select VIDEOBUF_DMA_CONTIG
---help---
- Add support for the Video In peripherial of the timberdale FPGA.
+ Add support for the Video In peripherial of the timberdale FPGA.
source "drivers/media/video/cx88/Kconfig"
source "drivers/media/video/saa7164/Kconfig"
+source "drivers/media/video/marvell-ccic/Kconfig"
+
config VIDEO_M32R_AR
tristate "AR devices"
depends on M32R && VIDEO_V4L2
To compile this driver as a module, choose M here: the
module will be called arv.
-config VIDEO_CAFE_CCIC
- tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
- depends on PCI && I2C && VIDEO_V4L2
- select VIDEO_OV7670
- ---help---
- This is a video4linux2 driver for the Marvell 88ALP01 integrated
- CMOS camera controller. This is the controller found on first-
- generation OLPC systems.
-
config VIDEO_SR030PC30
tristate "SR030PC30 VGA camera sensor support"
depends on I2C && VIDEO_V4L2
---help---
This driver supports NOON010PC30 CIF camera from Siliconfile
+source "drivers/media/video/m5mols/Kconfig"
+
config VIDEO_OMAP3
tristate "OMAP 3 Camera support (EXPERIMENTAL)"
select OMAP_IOMMU
help
This is a ov2640 camera driver
+config SOC_CAMERA_OV5642
+ tristate "ov5642 camera support"
+ depends on SOC_CAMERA && I2C
+ help
+ This is a V4L2 camera driver for the OmniVision OV5642 sensor
+
config SOC_CAMERA_OV6650
tristate "ov6650 sensor support"
depends on SOC_CAMERA && I2C
This is a v4l2 driver for the TI OMAP2 camera capture interface
config VIDEO_MX2_HOSTSUPPORT
- bool
+ bool
config VIDEO_MX2
tristate "i.MX27/i.MX25 Camera Sensor Interface driver"
This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor
Interface
+config VIDEO_SAMSUNG_S5P_FIMC
+ tristate "Samsung S5P and EXYNOS4 camera host interface driver"
+ depends on VIDEO_V4L2 && PLAT_S5P && PM_RUNTIME
+ select VIDEOBUF2_DMA_CONTIG
+ select V4L2_MEM2MEM_DEV
+ ---help---
+ This is a v4l2 driver for Samsung S5P and EXYNOS4 camera
+ host interface and video postprocessor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called s5p-fimc.
+
+config VIDEO_ATMEL_ISI
+ tristate "ATMEL Image Sensor Interface (ISI) support"
+ depends on VIDEO_DEV && SOC_CAMERA && ARCH_AT91
+ select VIDEOBUF2_DMA_CONTIG
+ ---help---
+ This module makes the ATMEL Image Sensor Interface available
+ as a v4l2 device.
+
+config VIDEO_S5P_MIPI_CSIS
+ tristate "Samsung S5P and EXYNOS4 MIPI CSI receiver driver"
+ depends on VIDEO_V4L2 && PM_RUNTIME && PLAT_S5P && VIDEO_V4L2_SUBDEV_API
+ ---help---
+ This is a v4l2 driver for Samsung S5P/EXYNOS4 MIPI-CSI receiver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called s5p-csis.
+
+source "drivers/media/video/s5p-tv/Kconfig"
#
# USB Multimedia device configuration
Supported devices are typically found in some Asus laptops,
with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
may be supported by the stk11xx driver, from which this is
- derived, see <http://sourceforge.net/projects/syntekdriver/>
+ derived, see <http://sourceforge.net/projects/syntekdriver/>
To compile this driver as a module, choose M here: the
module will be called stkwebcam.
This is a virtual test device for the memory-to-memory driver
framework.
-config VIDEO_SAMSUNG_S5P_FIMC
- tristate "Samsung S5P FIMC (video postprocessor) driver"
+
+config VIDEO_SAMSUNG_S5P_MFC
+ tristate "Samsung S5P MFC 5.1 Video Codec"
depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
select VIDEOBUF2_DMA_CONTIG
- select V4L2_MEM2MEM_DEV
+ default n
help
- This is a v4l2 driver for the S5P camera interface
- (video postprocessor)
+ MFC 5.1 driver for V4L2.
endif # V4L_MEM2MEM_DRIVERS
projects / deliverable / linux.git / blobdiff