[MTD] [NAND] Blackfin NFC Driver: add proper devinit/devexit markings to probe/remove...
[deliverable/linux.git] / drivers / mtd / nand / bf5xx_nand.c
index e87a57297328c4a72cde3d01c605e94d0299eee3..e259a7b75b2d93d50e87defc3a6a41e0e1639c2e 100644 (file)
@@ -91,6 +91,41 @@ static const unsigned short bfin_nfc_pin_req[] =
         P_NAND_ALE,
         0};
 
+#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
+static uint8_t bbt_pattern[] = { 0xff };
+
+static struct nand_bbt_descr bootrom_bbt = {
+       .options = 0,
+       .offs = 63,
+       .len = 1,
+       .pattern = bbt_pattern,
+};
+
+static struct nand_ecclayout bootrom_ecclayout = {
+       .eccbytes = 24,
+       .eccpos = {
+               0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2,
+               0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2,
+               0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2,
+               0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2,
+               0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2,
+               0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2,
+               0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2,
+               0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2
+       },
+       .oobfree = {
+               { 0x8 * 0 + 3, 5 },
+               { 0x8 * 1 + 3, 5 },
+               { 0x8 * 2 + 3, 5 },
+               { 0x8 * 3 + 3, 5 },
+               { 0x8 * 4 + 3, 5 },
+               { 0x8 * 5 + 3, 5 },
+               { 0x8 * 6 + 3, 5 },
+               { 0x8 * 7 + 3, 5 },
+       }
+};
+#endif
+
 /*
  * Data structures for bf5xx nand flash controller driver
  */
@@ -273,7 +308,7 @@ static int bf5xx_nand_correct_data(struct mtd_info *mtd, u_char *dat,
                dat += 256;
                read_ecc += 8;
                calc_ecc += 8;
-               ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
+               ret |= bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
        }
 
        return ret;
@@ -298,7 +333,7 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
        ecc0 = bfin_read_NFC_ECC0();
        ecc1 = bfin_read_NFC_ECC1();
 
-       code[0] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11);
+       code[0] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
 
        dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]);
 
@@ -310,7 +345,7 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
        if (page_size == 512) {
                ecc0 = bfin_read_NFC_ECC2();
                ecc1 = bfin_read_NFC_ECC3();
-               code[1] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11);
+               code[1] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
 
                /* second 3 bytes in ecc_code for second 256
                 * bytes of 512 page size
@@ -605,7 +640,7 @@ static int bf5xx_nand_add_partition(struct bf5xx_nand_info *info)
 #endif
 }
 
-static int bf5xx_nand_remove(struct platform_device *pdev)
+static int __devexit bf5xx_nand_remove(struct platform_device *pdev)
 {
        struct bf5xx_nand_info *info = to_nand_info(pdev);
        struct mtd_info *mtd = NULL;
@@ -638,7 +673,7 @@ static int bf5xx_nand_remove(struct platform_device *pdev)
  * it can allocate all necessary resources then calls the
  * nand layer to look for devices
  */
-static int bf5xx_nand_probe(struct platform_device *pdev)
+static int __devinit bf5xx_nand_probe(struct platform_device *pdev)
 {
        struct bf5xx_nand_platform *plat = to_nand_plat(pdev);
        struct bf5xx_nand_info *info = NULL;
@@ -712,6 +747,11 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 
        /* setup hardware ECC data struct */
        if (hardware_ecc) {
+#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
+               chip->badblock_pattern = &bootrom_bbt;
+               chip->ecc.layout = &bootrom_ecclayout;
+#endif
+
                if (plat->page_size == NFC_PG_SIZE_256) {
                        chip->ecc.bytes = 3;
                        chip->ecc.size = 256;
@@ -775,7 +815,7 @@ static int bf5xx_nand_resume(struct platform_device *dev)
 /* driver device registration */
 static struct platform_driver bf5xx_nand_driver = {
        .probe          = bf5xx_nand_probe,
-       .remove         = bf5xx_nand_remove,
+       .remove         = __devexit_p(bf5xx_nand_remove),
        .suspend        = bf5xx_nand_suspend,
        .resume         = bf5xx_nand_resume,
        .driver         = {
This page took 0.025194 seconds and 5 git commands to generate.