#include <asm/io.h>
-#include <asm/arch/regs-nand.h>
-#include <asm/arch/nand.h>
-
-#define PFX "s3c2410-nand: "
+#include <asm/plat-s3c/regs-nand.h>
+#include <asm/plat-s3c/nand.h>
#ifdef CONFIG_MTD_NAND_S3C2410_HWECC
static int hardware_ecc = 1;
int scan_res;
};
+enum s3c_cpu_type {
+ TYPE_S3C2410,
+ TYPE_S3C2412,
+ TYPE_S3C2440,
+};
+
/* overview of the s3c2410 nand state */
struct s3c2410_nand_info {
struct resource *area;
struct clk *clk;
void __iomem *regs;
+ void __iomem *sel_reg;
+ int sel_bit;
int mtd_count;
- unsigned char is_s3c2440;
+ enum s3c_cpu_type cpu_type;
};
/* conversion functions */
#define NS_IN_KHZ 1000000
-static int s3c2410_nand_calc_rate(int wanted, unsigned long clk, int max)
+static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max)
{
int result;
/* controller setup */
-static int s3c2410_nand_inithw(struct s3c2410_nand_info *info, struct platform_device *pdev)
+static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
+ struct platform_device *pdev)
{
struct s3c2410_platform_nand *plat = to_nand_plat(pdev);
unsigned long clkrate = clk_get_rate(info->clk);
+ int tacls_max = (info->cpu_type == TYPE_S3C2412) ? 8 : 4;
int tacls, twrph0, twrph1;
- unsigned long cfg;
+ unsigned long cfg = 0;
/* calculate the timing information for the controller */
clkrate /= 1000; /* turn clock into kHz for ease of use */
if (plat != NULL) {
- tacls = s3c2410_nand_calc_rate(plat->tacls, clkrate, 4);
- twrph0 = s3c2410_nand_calc_rate(plat->twrph0, clkrate, 8);
- twrph1 = s3c2410_nand_calc_rate(plat->twrph1, clkrate, 8);
+ tacls = s3c_nand_calc_rate(plat->tacls, clkrate, tacls_max);
+ twrph0 = s3c_nand_calc_rate(plat->twrph0, clkrate, 8);
+ twrph1 = s3c_nand_calc_rate(plat->twrph1, clkrate, 8);
} else {
/* default timings */
- tacls = 4;
+ tacls = tacls_max;
twrph0 = 8;
twrph1 = 8;
}
if (tacls < 0 || twrph0 < 0 || twrph1 < 0) {
- printk(KERN_ERR PFX "cannot get timings suitable for board\n");
+ dev_err(info->device, "cannot get suitable timings\n");
return -EINVAL;
}
- printk(KERN_INFO PFX "Tacls=%d, %dns Twrph0=%d %dns, Twrph1=%d %dns\n",
+ dev_info(info->device, "Tacls=%d, %dns Twrph0=%d %dns, Twrph1=%d %dns\n",
tacls, to_ns(tacls, clkrate), twrph0, to_ns(twrph0, clkrate), twrph1, to_ns(twrph1, clkrate));
- if (!info->is_s3c2440) {
+ switch (info->cpu_type) {
+ case TYPE_S3C2410:
cfg = S3C2410_NFCONF_EN;
cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
- } else {
+ break;
+
+ case TYPE_S3C2440:
+ case TYPE_S3C2412:
cfg = S3C2440_NFCONF_TACLS(tacls - 1);
cfg |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
cfg |= S3C2440_NFCONF_TWRPH1(twrph1 - 1);
/* enable the controller and de-assert nFCE */
- writel(S3C2440_NFCONT_ENABLE | S3C2440_NFCONT_ENABLE,
- info->regs + S3C2440_NFCONT);
+ writel(S3C2440_NFCONT_ENABLE, info->regs + S3C2440_NFCONT);
}
- pr_debug(PFX "NF_CONF is 0x%lx\n", cfg);
+ dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
writel(cfg, info->regs + S3C2410_NFCONF);
return 0;
struct s3c2410_nand_info *info;
struct s3c2410_nand_mtd *nmtd;
struct nand_chip *this = mtd->priv;
- void __iomem *reg;
unsigned long cur;
- unsigned long bit;
nmtd = this->priv;
info = nmtd->info;
- bit = (info->is_s3c2440) ? S3C2440_NFCONT_nFCE : S3C2410_NFCONF_nFCE;
- reg = info->regs + ((info->is_s3c2440) ? S3C2440_NFCONT : S3C2410_NFCONF);
-
if (chip != -1 && allow_clk_stop(info))
clk_enable(info->clk);
- cur = readl(reg);
+ cur = readl(info->sel_reg);
if (chip == -1) {
- cur |= bit;
+ cur |= info->sel_bit;
} else {
if (nmtd->set != NULL && chip > nmtd->set->nr_chips) {
- printk(KERN_ERR PFX "chip %d out of range\n", chip);
+ dev_err(info->device, "invalid chip %d\n", chip);
return;
}
(info->platform->select_chip) (nmtd->set, chip);
}
- cur &= ~bit;
+ cur &= ~info->sel_bit;
}
- writel(cur, reg);
+ writel(cur, info->sel_reg);
if (chip == -1 && allow_clk_stop(info))
clk_disable(info->clk);
unsigned int ctrl)
{
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
-
+
if (cmd == NAND_CMD_NONE)
return;
static int s3c2410_nand_devready(struct mtd_info *mtd)
{
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
-
- if (info->is_s3c2440)
- return readb(info->regs + S3C2440_NFSTAT) & S3C2440_NFSTAT_READY;
return readb(info->regs + S3C2410_NFSTAT) & S3C2410_NFSTAT_BUSY;
}
+static int s3c2440_nand_devready(struct mtd_info *mtd)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ return readb(info->regs + S3C2440_NFSTAT) & S3C2440_NFSTAT_READY;
+}
+
+static int s3c2412_nand_devready(struct mtd_info *mtd)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ return readb(info->regs + S3C2412_NFSTAT) & S3C2412_NFSTAT_READY;
+}
+
/* ECC handling functions */
-static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
+static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
{
- pr_debug("s3c2410_nand_correct_data(%p,%p,%p,%p)\n", mtd, dat, read_ecc, calc_ecc);
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ unsigned int diff0, diff1, diff2;
+ unsigned int bit, byte;
- pr_debug("eccs: read %02x,%02x,%02x vs calc %02x,%02x,%02x\n",
- read_ecc[0], read_ecc[1], read_ecc[2], calc_ecc[0], calc_ecc[1], calc_ecc[2]);
+ pr_debug("%s(%p,%p,%p,%p)\n", __func__, mtd, dat, read_ecc, calc_ecc);
- if (read_ecc[0] == calc_ecc[0] && read_ecc[1] == calc_ecc[1] && read_ecc[2] == calc_ecc[2])
- return 0;
+ diff0 = read_ecc[0] ^ calc_ecc[0];
+ diff1 = read_ecc[1] ^ calc_ecc[1];
+ diff2 = read_ecc[2] ^ calc_ecc[2];
- /* we curently have no method for correcting the error */
+ pr_debug("%s: rd %02x%02x%02x calc %02x%02x%02x diff %02x%02x%02x\n",
+ __func__,
+ read_ecc[0], read_ecc[1], read_ecc[2],
+ calc_ecc[0], calc_ecc[1], calc_ecc[2],
+ diff0, diff1, diff2);
- return -1;
+ if (diff0 == 0 && diff1 == 0 && diff2 == 0)
+ return 0; /* ECC is ok */
+
+ /* Can we correct this ECC (ie, one row and column change).
+ * Note, this is similar to the 256 error code on smartmedia */
+
+ if (((diff0 ^ (diff0 >> 1)) & 0x55) == 0x55 &&
+ ((diff1 ^ (diff1 >> 1)) & 0x55) == 0x55 &&
+ ((diff2 ^ (diff2 >> 1)) & 0x55) == 0x55) {
+ /* calculate the bit position of the error */
+
+ bit = (diff2 >> 2) & 1;
+ bit |= (diff2 >> 3) & 2;
+ bit |= (diff2 >> 4) & 4;
+
+ /* calculate the byte position of the error */
+
+ byte = (diff1 << 1) & 0x80;
+ byte |= (diff1 << 2) & 0x40;
+ byte |= (diff1 << 3) & 0x20;
+ byte |= (diff1 << 4) & 0x10;
+
+ byte |= (diff0 >> 3) & 0x08;
+ byte |= (diff0 >> 2) & 0x04;
+ byte |= (diff0 >> 1) & 0x02;
+ byte |= (diff0 >> 0) & 0x01;
+
+ byte |= (diff2 << 8) & 0x100;
+
+ dev_dbg(info->device, "correcting error bit %d, byte %d\n",
+ bit, byte);
+
+ dat[byte] ^= (1 << bit);
+ return 1;
+ }
+
+ /* if there is only one bit difference in the ECC, then
+ * one of only a row or column parity has changed, which
+ * means the error is most probably in the ECC itself */
+
+ diff0 |= (diff1 << 8);
+ diff0 |= (diff2 << 16);
+
+ if ((diff0 & ~(1<<fls(diff0))) == 0)
+ return 1;
+
+ return 0;
}
/* ECC functions
writel(ctrl, info->regs + S3C2410_NFCONF);
}
+static void s3c2412_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ unsigned long ctrl;
+
+ ctrl = readl(info->regs + S3C2440_NFCONT);
+ writel(ctrl | S3C2412_NFCONT_INIT_MAIN_ECC, info->regs + S3C2440_NFCONT);
+}
+
static void s3c2440_nand_enable_hwecc(struct mtd_info *mtd, int mode)
{
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
ecc_code[1] = readb(info->regs + S3C2410_NFECC + 1);
ecc_code[2] = readb(info->regs + S3C2410_NFECC + 2);
+ pr_debug("%s: returning ecc %02x%02x%02x\n", __func__,
+ ecc_code[0], ecc_code[1], ecc_code[2]);
+
+ return 0;
+}
+
+static int s3c2412_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ unsigned long ecc = readl(info->regs + S3C2412_NFMECC0);
+
+ ecc_code[0] = ecc;
+ ecc_code[1] = ecc >> 8;
+ ecc_code[2] = ecc >> 16;
+
pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", ecc_code[0], ecc_code[1], ecc_code[2]);
return 0;
ecc_code[1] = ecc >> 8;
ecc_code[2] = ecc >> 16;
- pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", ecc_code[0], ecc_code[1], ecc_code[2]);
+ pr_debug("%s: returning ecc %06lx\n", __func__, ecc);
return 0;
}
struct s3c2410_nand_set *set)
{
struct nand_chip *chip = &nmtd->chip;
+ void __iomem *regs = info->regs;
- chip->IO_ADDR_R = info->regs + S3C2410_NFDATA;
- chip->IO_ADDR_W = info->regs + S3C2410_NFDATA;
- chip->cmd_ctrl = s3c2410_nand_hwcontrol;
- chip->dev_ready = s3c2410_nand_devready;
chip->write_buf = s3c2410_nand_write_buf;
chip->read_buf = s3c2410_nand_read_buf;
chip->select_chip = s3c2410_nand_select_chip;
chip->options = 0;
chip->controller = &info->controller;
- if (info->is_s3c2440) {
- chip->IO_ADDR_R = info->regs + S3C2440_NFDATA;
- chip->IO_ADDR_W = info->regs + S3C2440_NFDATA;
- chip->cmd_ctrl = s3c2440_nand_hwcontrol;
- }
+ switch (info->cpu_type) {
+ case TYPE_S3C2410:
+ chip->IO_ADDR_W = regs + S3C2410_NFDATA;
+ info->sel_reg = regs + S3C2410_NFCONF;
+ info->sel_bit = S3C2410_NFCONF_nFCE;
+ chip->cmd_ctrl = s3c2410_nand_hwcontrol;
+ chip->dev_ready = s3c2410_nand_devready;
+ break;
+
+ case TYPE_S3C2440:
+ chip->IO_ADDR_W = regs + S3C2440_NFDATA;
+ info->sel_reg = regs + S3C2440_NFCONT;
+ info->sel_bit = S3C2440_NFCONT_nFCE;
+ chip->cmd_ctrl = s3c2440_nand_hwcontrol;
+ chip->dev_ready = s3c2440_nand_devready;
+ break;
+
+ case TYPE_S3C2412:
+ chip->IO_ADDR_W = regs + S3C2440_NFDATA;
+ info->sel_reg = regs + S3C2440_NFCONT;
+ info->sel_bit = S3C2412_NFCONT_nFCE0;
+ chip->cmd_ctrl = s3c2440_nand_hwcontrol;
+ chip->dev_ready = s3c2412_nand_devready;
+
+ if (readl(regs + S3C2410_NFCONF) & S3C2412_NFCONF_NANDBOOT)
+ dev_info(info->device, "System booted from NAND\n");
+
+ break;
+ }
+
+ chip->IO_ADDR_R = chip->IO_ADDR_W;
nmtd->info = info;
nmtd->mtd.priv = chip;
nmtd->set = set;
if (hardware_ecc) {
- chip->ecc.correct = s3c2410_nand_correct_data;
- chip->ecc.hwctl = s3c2410_nand_enable_hwecc;
chip->ecc.calculate = s3c2410_nand_calculate_ecc;
+ chip->ecc.correct = s3c2410_nand_correct_data;
chip->ecc.mode = NAND_ECC_HW;
chip->ecc.size = 512;
chip->ecc.bytes = 3;
chip->ecc.layout = &nand_hw_eccoob;
- if (info->is_s3c2440) {
- chip->ecc.hwctl = s3c2440_nand_enable_hwecc;
- chip->ecc.calculate = s3c2440_nand_calculate_ecc;
+ switch (info->cpu_type) {
+ case TYPE_S3C2410:
+ chip->ecc.hwctl = s3c2410_nand_enable_hwecc;
+ chip->ecc.calculate = s3c2410_nand_calculate_ecc;
+ break;
+
+ case TYPE_S3C2412:
+ chip->ecc.hwctl = s3c2412_nand_enable_hwecc;
+ chip->ecc.calculate = s3c2412_nand_calculate_ecc;
+ break;
+
+ case TYPE_S3C2440:
+ chip->ecc.hwctl = s3c2440_nand_enable_hwecc;
+ chip->ecc.calculate = s3c2440_nand_calculate_ecc;
+ break;
+
}
} else {
chip->ecc.mode = NAND_ECC_SOFT;
* nand layer to look for devices
*/
-static int s3c24xx_nand_probe(struct platform_device *pdev, int is_s3c2440)
+static int s3c24xx_nand_probe(struct platform_device *pdev,
+ enum s3c_cpu_type cpu_type)
{
struct s3c2410_platform_nand *plat = to_nand_plat(pdev);
struct s3c2410_nand_info *info;
info->device = &pdev->dev;
info->platform = plat;
info->regs = ioremap(res->start, size);
- info->is_s3c2440 = is_s3c2440;
+ info->cpu_type = cpu_type;
if (info->regs == NULL) {
dev_err(&pdev->dev, "cannot reserve register region\n");
static int s3c2410_nand_probe(struct platform_device *dev)
{
- return s3c24xx_nand_probe(dev, 0);
+ return s3c24xx_nand_probe(dev, TYPE_S3C2410);
}
static int s3c2440_nand_probe(struct platform_device *dev)
{
- return s3c24xx_nand_probe(dev, 1);
+ return s3c24xx_nand_probe(dev, TYPE_S3C2440);
+}
+
+static int s3c2412_nand_probe(struct platform_device *dev)
+{
+ return s3c24xx_nand_probe(dev, TYPE_S3C2412);
}
static struct platform_driver s3c2410_nand_driver = {
},
};
+static struct platform_driver s3c2412_nand_driver = {
+ .probe = s3c2412_nand_probe,
+ .remove = s3c2410_nand_remove,
+ .suspend = s3c24xx_nand_suspend,
+ .resume = s3c24xx_nand_resume,
+ .driver = {
+ .name = "s3c2412-nand",
+ .owner = THIS_MODULE,
+ },
+};
+
static int __init s3c2410_nand_init(void)
{
printk("S3C24XX NAND Driver, (c) 2004 Simtec Electronics\n");
+ platform_driver_register(&s3c2412_nand_driver);
platform_driver_register(&s3c2440_nand_driver);
return platform_driver_register(&s3c2410_nand_driver);
}
static void __exit s3c2410_nand_exit(void)
{
+ platform_driver_unregister(&s3c2412_nand_driver);
platform_driver_unregister(&s3c2440_nand_driver);
platform_driver_unregister(&s3c2410_nand_driver);
}