{
int i;
- for (i = 0; i < ARRAY_SIZE(adap->sge.ingr_map); i++) {
+ for (i = 0; i < adap->sge.ingr_sz; i++) {
struct sge_rspq *q = adap->sge.ingr_map[i];
if (q && q->handler) {
}
}
+/* Disable interrupt and napi handler */
+static void disable_interrupts(struct adapter *adap)
+{
+ if (adap->flags & FULL_INIT_DONE) {
+ t4_intr_disable(adap);
+ if (adap->flags & USING_MSIX) {
+ free_msix_queue_irqs(adap);
+ free_irq(adap->msix_info[0].vec, adap);
+ } else {
+ free_irq(adap->pdev->irq, adap);
+ }
+ quiesce_rx(adap);
+ }
+}
+
/*
* Enable NAPI scheduling and interrupt generation for all Rx queues.
*/
{
int i;
- for (i = 0; i < ARRAY_SIZE(adap->sge.ingr_map); i++) {
+ for (i = 0; i < adap->sge.ingr_sz; i++) {
struct sge_rspq *q = adap->sge.ingr_map[i];
if (!q)
int err, msi_idx, i, j;
struct sge *s = &adap->sge;
- bitmap_zero(s->starving_fl, MAX_EGRQ);
- bitmap_zero(s->txq_maperr, MAX_EGRQ);
+ bitmap_zero(s->starving_fl, s->egr_sz);
+ bitmap_zero(s->txq_maperr, s->egr_sz);
if (adap->flags & USING_MSIX)
msi_idx = 1; /* vector 0 is for non-queue interrupts */
msi_idx = -((int)s->intrq.abs_id + 1);
}
+ /* NOTE: If you add/delete any Ingress/Egress Queue allocations in here,
+ * don't forget to update the following which need to be
+ * synchronized to and changes here.
+ *
+ * 1. The calculations of MAX_INGQ in cxgb4.h.
+ *
+ * 2. Update enable_msix/name_msix_vecs/request_msix_queue_irqs
+ * to accommodate any new/deleted Ingress Queues
+ * which need MSI-X Vectors.
+ *
+ * 3. Update sge_qinfo_show() to include information on the
+ * new/deleted queues.
+ */
err = t4_sge_alloc_rxq(adap, &s->fw_evtq, true, adap->port[0],
msi_idx, NULL, fwevtq_handler);
if (err) {
static void cxgb_down(struct adapter *adapter)
{
- t4_intr_disable(adapter);
cancel_work_sync(&adapter->tid_release_task);
cancel_work_sync(&adapter->db_full_task);
cancel_work_sync(&adapter->db_drop_task);
adapter->tid_release_task_busy = false;
adapter->tid_release_head = NULL;
- if (adapter->flags & USING_MSIX) {
- free_msix_queue_irqs(adapter);
- free_irq(adapter->msix_info[0].vec, adapter);
- } else
- free_irq(adapter->pdev->irq, adapter);
- quiesce_rx(adapter);
t4_sge_stop(adapter);
t4_free_sge_resources(adapter);
adapter->flags &= ~FULL_INIT_DONE;
if (ret < 0)
return ret;
- ret = t4_cfg_pfvf(adap, adap->fn, adap->fn, 0, MAX_EGRQ, 64, MAX_INGQ,
- 0, 0, 4, 0xf, 0xf, 16, FW_CMD_CAP_PF, FW_CMD_CAP_PF);
+ ret = t4_cfg_pfvf(adap, adap->fn, adap->fn, 0, adap->sge.egr_sz, 64,
+ MAX_INGQ, 0, 0, 4, 0xf, 0xf, 16, FW_CMD_CAP_PF,
+ FW_CMD_CAP_PF);
if (ret < 0)
return ret;
enum dev_state state;
u32 params[7], val[7];
struct fw_caps_config_cmd caps_cmd;
- struct fw_devlog_cmd devlog_cmd;
- u32 devlog_meminfo;
int reset = 1;
+ /* Grab Firmware Device Log parameters as early as possible so we have
+ * access to it for debugging, etc.
+ */
+ ret = t4_init_devlog_params(adap);
+ if (ret < 0)
+ return ret;
+
/* Contact FW, advertising Master capability */
ret = t4_fw_hello(adap, adap->mbox, adap->mbox, MASTER_MAY, &state);
if (ret < 0) {
if (ret < 0)
goto bye;
- /* Read firmware device log parameters. We really need to find a way
- * to get these parameters initialized with some default values (which
- * are likely to be correct) for the case where we either don't
- * attache to the firmware or it's crashed when we probe the adapter.
- * That way we'll still be able to perform early firmware startup
- * debugging ... If the request to get the Firmware's Device Log
- * parameters fails, we'll live so we don't make that a fatal error.
- */
- memset(&devlog_cmd, 0, sizeof(devlog_cmd));
- devlog_cmd.op_to_write = htonl(FW_CMD_OP_V(FW_DEVLOG_CMD) |
- FW_CMD_REQUEST_F | FW_CMD_READ_F);
- devlog_cmd.retval_len16 = htonl(FW_LEN16(devlog_cmd));
- ret = t4_wr_mbox(adap, adap->mbox, &devlog_cmd, sizeof(devlog_cmd),
- &devlog_cmd);
- if (ret == 0) {
- devlog_meminfo =
- ntohl(devlog_cmd.memtype_devlog_memaddr16_devlog);
- adap->params.devlog.memtype =
- FW_DEVLOG_CMD_MEMTYPE_DEVLOG_G(devlog_meminfo);
- adap->params.devlog.start =
- FW_DEVLOG_CMD_MEMADDR16_DEVLOG_G(devlog_meminfo) << 4;
- adap->params.devlog.size = ntohl(devlog_cmd.memsize_devlog);
- }
-
/*
* Find out what ports are available to us. Note that we need to do
* this before calling adap_init0_no_config() since it needs nports
adap->tids.nftids = val[4] - val[3] + 1;
adap->sge.ingr_start = val[5];
+ /* qids (ingress/egress) returned from firmware can be anywhere
+ * in the range from EQ(IQFLINT)_START to EQ(IQFLINT)_END.
+ * Hence driver needs to allocate memory for this range to
+ * store the queue info. Get the highest IQFLINT/EQ index returned
+ * in FW_EQ_*_CMD.alloc command.
+ */
+ params[0] = FW_PARAM_PFVF(EQ_END);
+ params[1] = FW_PARAM_PFVF(IQFLINT_END);
+ ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, params, val);
+ if (ret < 0)
+ goto bye;
+ adap->sge.egr_sz = val[0] - adap->sge.egr_start + 1;
+ adap->sge.ingr_sz = val[1] - adap->sge.ingr_start + 1;
+
+ adap->sge.egr_map = kcalloc(adap->sge.egr_sz,
+ sizeof(*adap->sge.egr_map), GFP_KERNEL);
+ if (!adap->sge.egr_map) {
+ ret = -ENOMEM;
+ goto bye;
+ }
+
+ adap->sge.ingr_map = kcalloc(adap->sge.ingr_sz,
+ sizeof(*adap->sge.ingr_map), GFP_KERNEL);
+ if (!adap->sge.ingr_map) {
+ ret = -ENOMEM;
+ goto bye;
+ }
+
+ /* Allocate the memory for the vaious egress queue bitmaps
+ * ie starving_fl and txq_maperr.
+ */
+ adap->sge.starving_fl = kcalloc(BITS_TO_LONGS(adap->sge.egr_sz),
+ sizeof(long), GFP_KERNEL);
+ if (!adap->sge.starving_fl) {
+ ret = -ENOMEM;
+ goto bye;
+ }
+
+ adap->sge.txq_maperr = kcalloc(BITS_TO_LONGS(adap->sge.egr_sz),
+ sizeof(long), GFP_KERNEL);
+ if (!adap->sge.txq_maperr) {
+ ret = -ENOMEM;
+ goto bye;
+ }
+
params[0] = FW_PARAM_PFVF(CLIP_START);
params[1] = FW_PARAM_PFVF(CLIP_END);
ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, params, val);
* happened to HW/FW, stop issuing commands.
*/
bye:
+ kfree(adap->sge.egr_map);
+ kfree(adap->sge.ingr_map);
+ kfree(adap->sge.starving_fl);
+ kfree(adap->sge.txq_maperr);
if (ret != -ETIMEDOUT && ret != -EIO)
t4_fw_bye(adap, adap->mbox);
return ret;
netif_carrier_off(dev);
}
spin_unlock(&adap->stats_lock);
+ disable_interrupts(adap);
if (adap->flags & FULL_INIT_DONE)
cxgb_down(adap);
rtnl_unlock();
t4_free_mem(adapter->l2t);
t4_free_mem(adapter->tids.tid_tab);
+ kfree(adapter->sge.egr_map);
+ kfree(adapter->sge.ingr_map);
+ kfree(adapter->sge.starving_fl);
+ kfree(adapter->sge.txq_maperr);
disable_msi(adapter);
for_each_port(adapter, i)
if (is_offload(adapter))
detach_ulds(adapter);
+ disable_interrupts(adapter);
+
for_each_port(adapter, i)
if (adapter->port[i]->reg_state == NETREG_REGISTERED)
unregister_netdev(adapter->port[i]);
projects / deliverable / linux.git / blobdiff