/**
* ixgbe_ptp_read - read raw cycle counter (to be used by time counter)
- * @cc - the cyclecounter structure
+ * @cc: the cyclecounter structure
*
* this function reads the cyclecounter registers and is called by the
* cyclecounter structure used to construct a ns counter from the
/**
* ixgbe_ptp_adjfreq
- * @ptp - the ptp clock structure
- * @ppb - parts per billion adjustment from base
+ * @ptp: the ptp clock structure
+ * @ppb: parts per billion adjustment from base
*
* adjust the frequency of the ptp cycle counter by the
* indicated ppb from the base frequency.
/**
* ixgbe_ptp_adjtime
- * @ptp - the ptp clock structure
- * @delta - offset to adjust the cycle counter by
+ * @ptp: the ptp clock structure
+ * @delta: offset to adjust the cycle counter by
*
* adjust the timer by resetting the timecounter structure.
*/
/**
* ixgbe_ptp_gettime
- * @ptp - the ptp clock structure
- * @ts - timespec structure to hold the current time value
+ * @ptp: the ptp clock structure
+ * @ts: timespec structure to hold the current time value
*
* read the timecounter and return the correct value on ns,
* after converting it into a struct timespec.
/**
* ixgbe_ptp_settime
- * @ptp - the ptp clock structure
- * @ts - the timespec containing the new time for the cycle counter
+ * @ptp: the ptp clock structure
+ * @ts: the timespec containing the new time for the cycle counter
*
* reset the timecounter to use a new base value instead of the kernel
* wall timer value.
/**
* ixgbe_ptp_enable
- * @ptp - the ptp clock structure
- * @rq - the requested feature to change
- * @on - whether to enable or disable the feature
+ * @ptp: the ptp clock structure
+ * @rq: the requested feature to change
+ * @on: whether to enable or disable the feature
*
* enable (or disable) ancillary features of the phc subsystem.
* our driver only supports the PPS feature on the X540
/**
* ixgbe_ptp_check_pps_event
- * @adapter - the private adapter structure
- * @eicr - the interrupt cause register value
+ * @adapter: the private adapter structure
+ * @eicr: the interrupt cause register value
*
* This function is called by the interrupt routine when checking for
* interrupts. It will check and handle a pps event.
/**
* ixgbe_ptp_enable_sdp
- * @hw - the hardware private structure
- * @shift - the clock shift for calculating nanoseconds
+ * @hw: the hardware private structure
+ * @shift: the clock shift for calculating nanoseconds
*
* this function enables the clock out feature on the sdp0 for the
* X540 device. It will create a 1second periodic output that can be
/**
* ixgbe_ptp_disable_sdp
- * @hw - the private hardware structure
+ * @hw: the private hardware structure
*
* this function disables the auxiliary SDP clock out feature
*/
/**
* ixgbe_ptp_start_cyclecounter - create the cycle counter from hw
- * @adapter - pointer to the adapter structure
+ * @adapter: pointer to the adapter structure
*
* this function initializes the timecounter and cyclecounter
* structures for use in generated a ns counter from the arbitrary
{
struct ixgbe_hw *hw = &adapter->hw;
u32 incval = 0;
+ u32 timinca = 0;
u32 shift = 0;
u32 cycle_speed;
unsigned long flags;
break;
}
- /* Bail if the cycle speed didn't change */
- if (adapter->cycle_speed == cycle_speed)
+ /*
+ * grab the current TIMINCA value from the register so that it can be
+ * double checked. If the register value has been cleared, it must be
+ * reset to the correct value for generating a cyclecounter. If
+ * TIMINCA is zero, the SYSTIME registers do not increment at all.
+ */
+ timinca = IXGBE_READ_REG(hw, IXGBE_TIMINCA);
+
+ /* Bail if the cycle speed didn't change and TIMINCA is non-zero */
+ if (adapter->cycle_speed == cycle_speed && timinca)
return;
/* disable the SDP clock out */
/**
* ixgbe_ptp_init
- * @adapter - the ixgbe private adapter structure
+ * @adapter: the ixgbe private adapter structure
*
* This function performs the required steps for enabling ptp
* support. If ptp support has already been loaded it simply calls the