igb: add completion timeout workaround for 82575/82576

[deliverable/linux.git] / drivers / net / igb / igb_main.c

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index be480292aba18f998baf33100a436736e72df1e1..2cb546078c52b940dff6ad9292b53920474d5709 100644 (file)
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -127,14 +127,48 @@ static void igb_restore_vlan(struct igb_adapter *);
 static void igb_ping_all_vfs(struct igb_adapter *);
 static void igb_msg_task(struct igb_adapter *);
 static int igb_rcv_msg_from_vf(struct igb_adapter *, u32);
-static inline void igb_set_rah_pool(struct e1000_hw *, int , int);
 static void igb_set_mc_list_pools(struct igb_adapter *, int, u16);
 static void igb_vmm_control(struct igb_adapter *);
-static inline void igb_set_vmolr(struct e1000_hw *, int);
-static inline int igb_set_vf_rlpml(struct igb_adapter *, int, int);
 static int igb_set_vf_mac(struct igb_adapter *adapter, int, unsigned char *);
 static void igb_restore_vf_multicasts(struct igb_adapter *adapter);
 
+static inline void igb_set_vmolr(struct e1000_hw *hw, int vfn)
+{
+       u32 reg_data;
+
+       reg_data = rd32(E1000_VMOLR(vfn));
+       reg_data |= E1000_VMOLR_BAM |    /* Accept broadcast */
+                   E1000_VMOLR_ROPE |   /* Accept packets matched in UTA */
+                   E1000_VMOLR_ROMPE |  /* Accept packets matched in MTA */
+                   E1000_VMOLR_AUPE |   /* Accept untagged packets */
+                   E1000_VMOLR_STRVLAN; /* Strip vlan tags */
+       wr32(E1000_VMOLR(vfn), reg_data);
+}
+
+static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
+                                 int vfn)
+{
+       struct e1000_hw *hw = &adapter->hw;
+       u32 vmolr;
+
+       vmolr = rd32(E1000_VMOLR(vfn));
+       vmolr &= ~E1000_VMOLR_RLPML_MASK;
+       vmolr |= size | E1000_VMOLR_LPE;
+       wr32(E1000_VMOLR(vfn), vmolr);
+
+       return 0;
+}
+
+static inline void igb_set_rah_pool(struct e1000_hw *hw, int pool, int entry)
+{
+       u32 reg_data;
+
+       reg_data = rd32(E1000_RAH(entry));
+       reg_data &= ~E1000_RAH_POOL_MASK;
+       reg_data |= E1000_RAH_POOL_1 << pool;;
+       wr32(E1000_RAH(entry), reg_data);
+}
+
 #ifdef CONFIG_PM
 static int igb_suspend(struct pci_dev *, pm_message_t);
 static int igb_resume(struct pci_dev *);
@@ -2584,10 +2618,6 @@ static bool igb_has_link(struct igb_adapter *adapter)
                        link_active = true;
                }
                break;
-       case e1000_media_type_fiber:
-               ret_val = hw->mac.ops.check_for_link(hw);
-               link_active = !!(rd32(E1000_STATUS) & E1000_STATUS_LU);
-               break;
        case e1000_media_type_internal_serdes:
                ret_val = hw->mac.ops.check_for_link(hw);
                link_active = hw->mac.serdes_has_link;
@@ -4999,6 +5029,34 @@ static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
        }
 }
 
+s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+       struct igb_adapter *adapter = hw->back;
+       u16 cap_offset;
+
+       cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
+       if (!cap_offset)
+               return -E1000_ERR_CONFIG;
+
+       pci_read_config_word(adapter->pdev, cap_offset + reg, value);
+
+       return 0;
+}
+
+s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+       struct igb_adapter *adapter = hw->back;
+       u16 cap_offset;
+
+       cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
+       if (!cap_offset)
+               return -E1000_ERR_CONFIG;
+
+       pci_write_config_word(adapter->pdev, cap_offset + reg, *value);
+
+       return 0;
+}
+
 static void igb_vlan_rx_register(struct net_device *netdev,
                                 struct vlan_group *grp)
 {
@@ -5102,14 +5160,6 @@ int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx)
 
        mac->autoneg = 0;
 
-       /* Fiber NICs only allow 1000 gbps Full duplex */
-       if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
-               spddplx != (SPEED_1000 + DUPLEX_FULL)) {
-               dev_err(&adapter->pdev->dev,
-                       "Unsupported Speed/Duplex configuration\n");
-               return -EINVAL;
-       }
-
        switch (spddplx) {
        case SPEED_10 + DUPLEX_HALF:
                mac->forced_speed_duplex = ADVERTISE_10_HALF;
@@ -5418,43 +5468,6 @@ static void igb_io_resume(struct pci_dev *pdev)
        igb_get_hw_control(adapter);
 }
 
-static inline void igb_set_vmolr(struct e1000_hw *hw, int vfn)
-{
-       u32 reg_data;
-
-       reg_data = rd32(E1000_VMOLR(vfn));
-       reg_data |= E1000_VMOLR_BAM |    /* Accept broadcast */
-                   E1000_VMOLR_ROPE |   /* Accept packets matched in UTA */
-                   E1000_VMOLR_ROMPE |  /* Accept packets matched in MTA */
-                   E1000_VMOLR_AUPE |   /* Accept untagged packets */
-                   E1000_VMOLR_STRVLAN; /* Strip vlan tags */
-       wr32(E1000_VMOLR(vfn), reg_data);
-}
-
-static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
-                                 int vfn)
-{
-       struct e1000_hw *hw = &adapter->hw;
-       u32 vmolr;
-
-       vmolr = rd32(E1000_VMOLR(vfn));
-       vmolr &= ~E1000_VMOLR_RLPML_MASK;
-       vmolr |= size | E1000_VMOLR_LPE;
-       wr32(E1000_VMOLR(vfn), vmolr);
-
-       return 0;
-}
-
-static inline void igb_set_rah_pool(struct e1000_hw *hw, int pool, int entry)
-{
-       u32 reg_data;
-
-       reg_data = rd32(E1000_RAH(entry));
-       reg_data &= ~E1000_RAH_POOL_MASK;
-       reg_data |= E1000_RAH_POOL_1 << pool;;
-       wr32(E1000_RAH(entry), reg_data);
-}
-
 static void igb_set_mc_list_pools(struct igb_adapter *adapter,
                                  int entry_count, u16 total_rar_filters)
 {