/*******************************************************************************
Intel PRO/10GbE Linux driver
- Copyright(c) 1999 - 2006 Intel Corporation.
+ Copyright(c) 1999 - 2008 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
*/
eecd_reg &= ~IXGB_EECD_DI;
- if(data & mask)
+ if (data & mask)
eecd_reg |= IXGB_EECD_DI;
IXGB_WRITE_REG(hw, EECD, eecd_reg);
mask = mask >> 1;
- } while(mask);
+ } while (mask);
/* We leave the "DI" bit set to "0" when we leave this routine. */
eecd_reg &= ~IXGB_EECD_DI;
eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI);
data = 0;
- for(i = 0; i < 16; i++) {
+ for (i = 0; i < 16; i++) {
data = data << 1;
ixgb_raise_clock(hw, &eecd_reg);
eecd_reg = IXGB_READ_REG(hw, EECD);
eecd_reg &= ~(IXGB_EECD_DI);
- if(eecd_reg & IXGB_EECD_DO)
+ if (eecd_reg & IXGB_EECD_DO)
data |= 1;
ixgb_lower_clock(hw, &eecd_reg);
eecd_reg = IXGB_READ_REG(hw, EECD);
- /* Deselct EEPROM */
+ /* Deselect EEPROM */
eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_SK);
IXGB_WRITE_REG(hw, EECD, eecd_reg);
udelay(50);
*/
ixgb_standby_eeprom(hw);
- /* Now read DO repeatedly until is high (equal to '1'). The EEEPROM will
+ /* Now read DO repeatedly until is high (equal to '1'). The EEPROM will
* signal that the command has been completed by raising the DO signal.
* If DO does not go high in 10 milliseconds, then error out.
*/
- for(i = 0; i < 200; i++) {
+ for (i = 0; i < 200; i++) {
eecd_reg = IXGB_READ_REG(hw, EECD);
- if(eecd_reg & IXGB_EECD_DO)
+ if (eecd_reg & IXGB_EECD_DO)
return (true);
udelay(50);
u16 checksum = 0;
u16 i;
- for(i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++)
+ for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++)
checksum += ixgb_read_eeprom(hw, i);
- if(checksum == (u16) EEPROM_SUM)
+ if (checksum == (u16) EEPROM_SUM)
return (true);
else
return (false);
u16 checksum = 0;
u16 i;
- for(i = 0; i < EEPROM_CHECKSUM_REG; i++)
+ for (i = 0; i < EEPROM_CHECKSUM_REG; i++)
checksum += ixgb_read_eeprom(hw, i);
checksum = (u16) EEPROM_SUM - checksum;
*
* hw - Struct containing variables accessed by shared code
* reg - offset within the EEPROM to be written to
- * data - 16 bit word to be writen to the EEPROM
+ * data - 16 bit word to be written to the EEPROM
*
* If ixgb_update_eeprom_checksum is not called after this function, the
* EEPROM will most likely contain an invalid checksum.
ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
DEBUGOUT("ixgb_ee: Reading eeprom data\n");
- for(i = 0; i < IXGB_EEPROM_SIZE ; i++) {
+ for (i = 0; i < IXGB_EEPROM_SIZE ; i++) {
u16 ee_data;
ee_data = ixgb_read_eeprom(hw, i);
checksum += ee_data;