u32 txoff = IXGBE_TFCS_TXOFF;
#ifdef CONFIG_IXGBE_DCB
- if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+ if (adapter->dcb_cfg.pfc_mode_enable) {
int tc;
int reg_idx = tx_ring->reg_idx;
int dcb_i = adapter->ring_feature[RING_F_DCB].indices;
/* detected Tx unit hang */
union ixgbe_adv_tx_desc *tx_desc;
tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
- DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
- " Tx Queue <%d>\n"
- " TDH, TDT <%x>, <%x>\n"
- " next_to_use <%x>\n"
- " next_to_clean <%x>\n"
- "tx_buffer_info[next_to_clean]\n"
- " time_stamp <%lx>\n"
- " jiffies <%lx>\n",
- tx_ring->queue_index,
- IXGBE_READ_REG(hw, tx_ring->head),
- IXGBE_READ_REG(hw, tx_ring->tail),
- tx_ring->next_to_use, eop,
- tx_ring->tx_buffer_info[eop].time_stamp, jiffies);
+ e_err(drv, "Detected Tx Unit Hang\n"
+ " Tx Queue <%d>\n"
+ " TDH, TDT <%x>, <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "tx_buffer_info[next_to_clean]\n"
+ " time_stamp <%lx>\n"
+ " jiffies <%lx>\n",
+ tx_ring->queue_index,
+ IXGBE_READ_REG(hw, tx_ring->head),
+ IXGBE_READ_REG(hw, tx_ring->tail),
+ tx_ring->next_to_use, eop,
+ tx_ring->tx_buffer_info[eop].time_stamp, jiffies);
return true;
}
if (adapter->detect_tx_hung) {
if (ixgbe_check_tx_hang(adapter, tx_ring, i)) {
/* schedule immediate reset if we believe we hung */
- DPRINTK(PROBE, INFO,
- "tx hang %d detected, resetting adapter\n",
- adapter->tx_timeout_count + 1);
+ e_info(probe, "tx hang %d detected, resetting "
+ "adapter\n", adapter->tx_timeout_count + 1);
ixgbe_tx_timeout(adapter->netdev);
}
}
return;
break;
}
- DPRINTK(DRV, ERR, "Network adapter has been stopped because it "
- "has over heated. Restart the computer. If the problem "
- "persists, power off the system and replace the "
- "adapter\n");
+ e_crit(drv, "Network adapter has been stopped because it has "
+ "over heated. Restart the computer. If the problem "
+ "persists, power off the system and replace the "
+ "adapter\n");
/* write to clear the interrupt */
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP0);
}
if ((adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) &&
(eicr & IXGBE_EICR_GPI_SDP1)) {
- DPRINTK(PROBE, CRIT, "Fan has stopped, replace the adapter\n");
+ e_crit(probe, "Fan has stopped, replace the adapter\n");
/* write to clear the interrupt */
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
}
handler, 0, adapter->name[vector],
adapter->q_vector[vector]);
if (err) {
- DPRINTK(PROBE, ERR,
- "request_irq failed for MSIX interrupt "
- "Error: %d\n", err);
+ e_err(probe, "request_irq failed for MSIX interrupt "
+ "Error: %d\n", err);
goto free_queue_irqs;
}
}
err = request_irq(adapter->msix_entries[vector].vector,
ixgbe_msix_lsc, 0, adapter->name[vector], netdev);
if (err) {
- DPRINTK(PROBE, ERR,
- "request_irq for msix_lsc failed: %d\n", err);
+ e_err(probe, "request_irq for msix_lsc failed: %d\n", err);
goto free_queue_irqs;
}
}
if (err)
- DPRINTK(PROBE, ERR, "request_irq failed, Error %d\n", err);
+ e_err(probe, "request_irq failed, Error %d\n", err);
return err;
}
map_vector_to_rxq(adapter, 0, 0);
map_vector_to_txq(adapter, 0, 0);
- DPRINTK(HW, INFO, "Legacy interrupt IVAR setup done\n");
+ e_info(hw, "Legacy interrupt IVAR setup done\n");
}
/**
/* Perform hash on these packet types */
mrqc |= IXGBE_MRQC_RSS_FIELD_IPV4
| IXGBE_MRQC_RSS_FIELD_IPV4_TCP
- | IXGBE_MRQC_RSS_FIELD_IPV4_UDP
| IXGBE_MRQC_RSS_FIELD_IPV6
- | IXGBE_MRQC_RSS_FIELD_IPV6_TCP
- | IXGBE_MRQC_RSS_FIELD_IPV6_UDP;
+ | IXGBE_MRQC_RSS_FIELD_IPV6_TCP;
}
IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc);
}
}
+/**
+ * ixgbe_write_uc_addr_list - write unicast addresses to RAR table
+ * @netdev: network interface device structure
+ *
+ * Writes unicast address list to the RAR table.
+ * Returns: -ENOMEM on failure/insufficient address space
+ * 0 on no addresses written
+ * X on writing X addresses to the RAR table
+ **/
+static int ixgbe_write_uc_addr_list(struct net_device *netdev)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ unsigned int vfn = adapter->num_vfs;
+ unsigned int rar_entries = hw->mac.num_rar_entries - (vfn + 1);
+ int count = 0;
+
+ /* return ENOMEM indicating insufficient memory for addresses */
+ if (netdev_uc_count(netdev) > rar_entries)
+ return -ENOMEM;
+
+ if (!netdev_uc_empty(netdev) && rar_entries) {
+ struct netdev_hw_addr *ha;
+ /* return error if we do not support writing to RAR table */
+ if (!hw->mac.ops.set_rar)
+ return -ENOMEM;
+
+ netdev_for_each_uc_addr(ha, netdev) {
+ if (!rar_entries)
+ break;
+ hw->mac.ops.set_rar(hw, rar_entries--, ha->addr,
+ vfn, IXGBE_RAH_AV);
+ count++;
+ }
+ }
+ /* write the addresses in reverse order to avoid write combining */
+ for (; rar_entries > 0 ; rar_entries--)
+ hw->mac.ops.clear_rar(hw, rar_entries);
+
+ return count;
+}
+
/**
* ixgbe_set_rx_mode - Unicast, Multicast and Promiscuous mode set
* @netdev: network interface device structure
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
struct ixgbe_hw *hw = &adapter->hw;
- u32 fctrl;
+ u32 fctrl, vmolr = IXGBE_VMOLR_BAM | IXGBE_VMOLR_AUPE;
+ int count;
/* Check for Promiscuous and All Multicast modes */
fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+ /* clear the bits we are changing the status of */
+ fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
+
if (netdev->flags & IFF_PROMISC) {
hw->addr_ctrl.user_set_promisc = true;
fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
+ vmolr |= (IXGBE_VMOLR_ROPE | IXGBE_VMOLR_MPE);
/* don't hardware filter vlans in promisc mode */
ixgbe_vlan_filter_disable(adapter);
} else {
if (netdev->flags & IFF_ALLMULTI) {
fctrl |= IXGBE_FCTRL_MPE;
- fctrl &= ~IXGBE_FCTRL_UPE;
- } else if (!hw->addr_ctrl.uc_set_promisc) {
- fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
+ vmolr |= IXGBE_VMOLR_MPE;
+ } else {
+ /*
+ * Write addresses to the MTA, if the attempt fails
+ * then we should just turn on promiscous mode so
+ * that we can at least receive multicast traffic
+ */
+ hw->mac.ops.update_mc_addr_list(hw, netdev);
+ vmolr |= IXGBE_VMOLR_ROMPE;
}
ixgbe_vlan_filter_enable(adapter);
hw->addr_ctrl.user_set_promisc = false;
+ /*
+ * Write addresses to available RAR registers, if there is not
+ * sufficient space to store all the addresses then enable
+ * unicast promiscous mode
+ */
+ count = ixgbe_write_uc_addr_list(netdev);
+ if (count < 0) {
+ fctrl |= IXGBE_FCTRL_UPE;
+ vmolr |= IXGBE_VMOLR_ROPE;
+ }
}
- IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
-
- /* reprogram secondary unicast list */
- hw->mac.ops.update_uc_addr_list(hw, netdev);
-
- /* reprogram multicast list */
- hw->mac.ops.update_mc_addr_list(hw, netdev);
-
- if (adapter->num_vfs)
+ if (adapter->num_vfs) {
ixgbe_restore_vf_multicasts(adapter);
+ vmolr |= IXGBE_READ_REG(hw, IXGBE_VMOLR(adapter->num_vfs)) &
+ ~(IXGBE_VMOLR_MPE | IXGBE_VMOLR_ROMPE |
+ IXGBE_VMOLR_ROPE);
+ IXGBE_WRITE_REG(hw, IXGBE_VMOLR(adapter->num_vfs), vmolr);
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
}
static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter)
msleep(1);
}
if (k >= IXGBE_MAX_RX_DESC_POLL) {
- DPRINTK(DRV, ERR, "RXDCTL.ENABLE on Rx queue %d "
- "not set within the polling period\n", rxr);
+ e_err(drv, "RXDCTL.ENABLE on Rx queue %d not set within "
+ "the polling period\n", rxr);
}
ixgbe_release_rx_desc(&adapter->hw, adapter->rx_ring[rxr],
(adapter->rx_ring[rxr]->count - 1));
} while (--wait_loop &&
!(txdctl & IXGBE_TXDCTL_ENABLE));
if (!wait_loop)
- DPRINTK(DRV, ERR, "Could not enable "
- "Tx Queue %d\n", j);
+ e_err(drv, "Could not enable Tx Queue %d\n", j);
}
}
if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
if (esdp & IXGBE_ESDP_SDP1)
- DPRINTK(DRV, CRIT,
- "Fan has stopped, replace the adapter\n");
+ e_crit(drv, "Fan has stopped, replace the adapter\n");
}
/*
} else {
err = ixgbe_non_sfp_link_config(hw);
if (err)
- DPRINTK(PROBE, ERR, "link_config FAILED %d\n", err);
+ e_err(probe, "link_config FAILED %d\n", err);
}
for (i = 0; i < adapter->num_tx_queues; i++)
case IXGBE_ERR_SFP_NOT_PRESENT:
break;
case IXGBE_ERR_MASTER_REQUESTS_PENDING:
- dev_err(&adapter->pdev->dev, "master disable timed out\n");
+ e_dev_err("master disable timed out\n");
break;
case IXGBE_ERR_EEPROM_VERSION:
/* We are running on a pre-production device, log a warning */
- dev_warn(&adapter->pdev->dev, "This device is a pre-production "
- "adapter/LOM. Please be aware there may be issues "
- "associated with your hardware. If you are "
- "experiencing problems please contact your Intel or "
- "hardware representative who provided you with this "
- "hardware.\n");
+ e_dev_warn("This device is a pre-production adapter/LOM. "
+ "Please be aware there may be issuesassociated with "
+ "your hardware. If you are experiencing problems "
+ "please contact your Intel or hardware "
+ "representative who provided you with this "
+ "hardware.\n");
break;
default:
- dev_err(&adapter->pdev->dev, "Hardware Error: %d\n", err);
+ e_dev_err("Hardware Error: %d\n", err);
}
/* reprogram the RAR[0] in case user changed it. */
/* signal that we are down to the interrupt handler */
set_bit(__IXGBE_DOWN, &adapter->state);
- /* power down the optics */
- if (hw->phy.multispeed_fiber)
- hw->mac.ops.disable_tx_laser(hw);
-
/* disable receive for all VFs and wait one second */
if (adapter->num_vfs) {
/* ping all the active vfs to let them know we are going down */
(IXGBE_READ_REG(hw, IXGBE_DMATXCTL) &
~IXGBE_DMATXCTL_TE));
+ /* power down the optics */
+ if (hw->phy.multispeed_fiber)
+ hw->mac.ops.disable_tx_laser(hw);
+
/* clear n-tuple filters that are cached */
ethtool_ntuple_flush(netdev);
adapter->num_tx_queues = 1;
#ifdef CONFIG_IXGBE_DCB
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
- DPRINTK(PROBE, INFO, "FCoE enabled with DCB\n");
+ e_info(probe, "FCoE enabled with DCB\n");
ixgbe_set_dcb_queues(adapter);
}
#endif
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
- DPRINTK(PROBE, INFO, "FCoE enabled with RSS\n");
+ e_info(probe, "FCoE enabled with RSS\n");
if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
ixgbe_set_fdir_queues(adapter);
done:
/* Notify the stack of the (possibly) reduced Tx Queue count. */
- adapter->netdev->real_num_tx_queues = adapter->num_tx_queues;
+ netif_set_real_num_tx_queues(adapter->netdev, adapter->num_tx_queues);
}
static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
* This just means we'll go with either a single MSI
* vector or fall back to legacy interrupts.
*/
- DPRINTK(HW, DEBUG, "Unable to allocate MSI-X interrupts\n");
+ netif_printk(adapter, hw, KERN_DEBUG, adapter->netdev,
+ "Unable to allocate MSI-X interrupts\n");
adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
kfree(adapter->msix_entries);
adapter->msix_entries = NULL;
if (!err) {
adapter->flags |= IXGBE_FLAG_MSI_ENABLED;
} else {
- DPRINTK(HW, DEBUG, "Unable to allocate MSI interrupt, "
- "falling back to legacy. Error: %d\n", err);
+ netif_printk(adapter, hw, KERN_DEBUG, adapter->netdev,
+ "Unable to allocate MSI interrupt, "
+ "falling back to legacy. Error: %d\n", err);
/* reset err */
err = 0;
}
err = ixgbe_set_interrupt_capability(adapter);
if (err) {
- DPRINTK(PROBE, ERR, "Unable to setup interrupt capabilities\n");
+ e_dev_err("Unable to setup interrupt capabilities\n");
goto err_set_interrupt;
}
err = ixgbe_alloc_q_vectors(adapter);
if (err) {
- DPRINTK(PROBE, ERR, "Unable to allocate memory for queue "
- "vectors\n");
+ e_dev_err("Unable to allocate memory for queue vectors\n");
goto err_alloc_q_vectors;
}
err = ixgbe_alloc_queues(adapter);
if (err) {
- DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
+ e_dev_err("Unable to allocate memory for queues\n");
goto err_alloc_queues;
}
- DPRINTK(DRV, INFO, "Multiqueue %s: Rx Queue count = %u, "
- "Tx Queue count = %u\n",
- (adapter->num_rx_queues > 1) ? "Enabled" :
- "Disabled", adapter->num_rx_queues, adapter->num_tx_queues);
+ e_dev_info("Multiqueue %s: Rx Queue count = %u, Tx Queue count = %u\n",
+ (adapter->num_rx_queues > 1) ? "Enabled" : "Disabled",
+ adapter->num_rx_queues, adapter->num_tx_queues);
set_bit(__IXGBE_DOWN, &adapter->state);
goto reschedule;
ret = hw->phy.ops.reset(hw);
if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- dev_err(&adapter->pdev->dev, "failed to initialize "
- "because an unsupported SFP+ module type "
- "was detected.\n"
- "Reload the driver after installing a "
- "supported module.\n");
+ e_dev_err("failed to initialize because an unsupported "
+ "SFP+ module type was detected.\n");
+ e_dev_err("Reload the driver after installing a "
+ "supported module.\n");
unregister_netdev(adapter->netdev);
} else {
- DPRINTK(PROBE, INFO, "detected SFP+: %d\n",
- hw->phy.sfp_type);
+ e_info(probe, "detected SFP+: %d\n", hw->phy.sfp_type);
}
/* don't need this routine any more */
clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
/* initialize eeprom parameters */
if (ixgbe_init_eeprom_params_generic(hw)) {
- dev_err(&pdev->dev, "EEPROM initialization failed\n");
+ e_dev_err("EEPROM initialization failed\n");
return -EIO;
}
err:
vfree(tx_ring->tx_buffer_info);
tx_ring->tx_buffer_info = NULL;
- DPRINTK(PROBE, ERR, "Unable to allocate memory for the transmit "
- "descriptor ring\n");
+ e_err(probe, "Unable to allocate memory for the Tx descriptor ring\n");
return -ENOMEM;
}
err = ixgbe_setup_tx_resources(adapter, adapter->tx_ring[i]);
if (!err)
continue;
- DPRINTK(PROBE, ERR, "Allocation for Tx Queue %u failed\n", i);
+ e_err(probe, "Allocation for Tx Queue %u failed\n", i);
break;
}
if (!rx_ring->rx_buffer_info)
rx_ring->rx_buffer_info = vmalloc(size);
if (!rx_ring->rx_buffer_info) {
- DPRINTK(PROBE, ERR,
- "vmalloc allocation failed for the rx desc ring\n");
+ e_err(probe, "vmalloc allocation failed for the Rx "
+ "descriptor ring\n");
goto alloc_failed;
}
memset(rx_ring->rx_buffer_info, 0, size);
&rx_ring->dma, GFP_KERNEL);
if (!rx_ring->desc) {
- DPRINTK(PROBE, ERR,
- "Memory allocation failed for the rx desc ring\n");
+ e_err(probe, "Memory allocation failed for the Rx "
+ "descriptor ring\n");
vfree(rx_ring->rx_buffer_info);
goto alloc_failed;
}
err = ixgbe_setup_rx_resources(adapter, adapter->rx_ring[i]);
if (!err)
continue;
- DPRINTK(PROBE, ERR, "Allocation for Rx Queue %u failed\n", i);
+ e_err(probe, "Allocation for Rx Queue %u failed\n", i);
break;
}
if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE))
return -EINVAL;
- DPRINTK(PROBE, INFO, "changing MTU from %d to %d\n",
- netdev->mtu, new_mtu);
+ e_info(probe, "changing MTU from %d to %d\n", netdev->mtu, new_mtu);
/* must set new MTU before calling down or up */
netdev->mtu = new_mtu;
err = pci_enable_device_mem(pdev);
if (err) {
- printk(KERN_ERR "ixgbe: Cannot enable PCI device from "
- "suspend\n");
+ e_dev_err("Cannot enable PCI device from suspend\n");
return err;
}
pci_set_master(pdev);
err = ixgbe_init_interrupt_scheme(adapter);
if (err) {
- printk(KERN_ERR "ixgbe: Cannot initialize interrupts for "
- "device\n");
+ e_dev_err("Cannot initialize interrupts for device\n");
return err;
}
ixgbe_free_all_tx_resources(adapter);
ixgbe_free_all_rx_resources(adapter);
}
- ixgbe_clear_interrupt_scheme(adapter);
#ifdef CONFIG_PM
retval = pci_save_state(pdev);
*enable_wake = !!wufc;
+ ixgbe_clear_interrupt_scheme(adapter);
+
ixgbe_release_hw_control(adapter);
pci_disable_device(pdev);
u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot;
u64 non_eop_descs = 0, restart_queue = 0;
+ if (test_bit(__IXGBE_DOWN, &adapter->state) ||
+ test_bit(__IXGBE_RESETTING, &adapter->state))
+ return;
+
if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
u64 rsc_count = 0;
u64 rsc_flush = 0;
err = hw->phy.ops.identify_sfp(hw);
if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- dev_err(&adapter->pdev->dev, "failed to initialize because "
- "an unsupported SFP+ module type was detected.\n"
- "Reload the driver after installing a supported "
- "module.\n");
+ e_dev_err("failed to initialize because an unsupported SFP+ "
+ "module type was detected.\n");
+ e_dev_err("Reload the driver after installing a supported "
+ "module.\n");
unregister_netdev(adapter->netdev);
return;
}
set_bit(__IXGBE_FDIR_INIT_DONE,
&(adapter->tx_ring[i]->reinit_state));
} else {
- DPRINTK(PROBE, ERR, "failed to finish FDIR re-initialization, "
- "ignored adding FDIR ATR filters\n");
+ e_err(probe, "failed to finish FDIR re-initialization, "
+ "ignored adding FDIR ATR filters\n");
}
/* Done FDIR Re-initialization, enable transmits */
netif_tx_start_all_queues(adapter->netdev);
flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X);
}
- printk(KERN_INFO "ixgbe: %s NIC Link is Up %s, "
- "Flow Control: %s\n",
- netdev->name,
+ e_info(drv, "NIC Link is Up %s, Flow Control: %s\n",
(link_speed == IXGBE_LINK_SPEED_10GB_FULL ?
- "10 Gbps" :
- (link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
- "1 Gbps" : "unknown speed")),
+ "10 Gbps" :
+ (link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
+ "1 Gbps" : "unknown speed")),
((flow_rx && flow_tx) ? "RX/TX" :
- (flow_rx ? "RX" :
- (flow_tx ? "TX" : "None"))));
+ (flow_rx ? "RX" :
+ (flow_tx ? "TX" : "None"))));
netif_carrier_on(netdev);
} else {
adapter->link_up = false;
adapter->link_speed = 0;
if (netif_carrier_ok(netdev)) {
- printk(KERN_INFO "ixgbe: %s NIC Link is Down\n",
- netdev->name);
+ e_info(drv, "NIC Link is Down\n");
netif_carrier_off(netdev);
}
}
break;
default:
if (unlikely(net_ratelimit())) {
- DPRINTK(PROBE, WARNING,
- "partial checksum but proto=%x!\n",
- skb->protocol);
+ e_warn(probe, "partial checksum "
+ "but proto=%x!\n",
+ skb->protocol);
}
break;
}
return count;
dma_error:
- dev_err(&pdev->dev, "TX DMA map failed\n");
+ e_dev_err("TX DMA map failed\n");
/* clear timestamp and dma mappings for failed tx_buffer_info map */
tx_buffer_info->dma = 0;
static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb,
int queue, u32 tx_flags)
{
- /* Right now, we support IPv4 only */
struct ixgbe_atr_input atr_input;
struct tcphdr *th;
struct iphdr *iph = ip_hdr(skb);
u32 src_ipv4_addr, dst_ipv4_addr;
u8 l4type = 0;
+ /* Right now, we support IPv4 only */
+ if (skb->protocol != htons(ETH_P_IP))
+ return;
/* check if we're UDP or TCP */
if (iph->protocol == IPPROTO_TCP) {
th = tcp_hdr(skb);
adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED;
err = pci_enable_sriov(adapter->pdev, adapter->num_vfs);
if (err) {
- DPRINTK(PROBE, ERR,
- "Failed to enable PCI sriov: %d\n", err);
+ e_err(probe, "Failed to enable PCI sriov: %d\n", err);
goto err_novfs;
}
/* If call to enable VFs succeeded then allocate memory
}
/* Oh oh */
- DPRINTK(PROBE, ERR,
- "Unable to allocate memory for VF "
- "Data Storage - SRIOV disabled\n");
+ e_err(probe, "Unable to allocate memory for VF Data Storage - "
+ "SRIOV disabled\n");
pci_disable_sriov(adapter->pdev);
err_novfs:
err = dma_set_coherent_mask(&pdev->dev,
DMA_BIT_MASK(32));
if (err) {
- dev_err(&pdev->dev, "No usable DMA "
- "configuration, aborting\n");
+ e_dev_err("No usable DMA configuration, "
+ "aborting\n");
goto err_dma;
}
}
err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
IORESOURCE_MEM), ixgbe_driver_name);
if (err) {
- dev_err(&pdev->dev,
- "pci_request_selected_regions failed 0x%x\n", err);
+ e_dev_err("pci_request_selected_regions failed 0x%x\n", err);
goto err_pci_reg;
}
if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
if (esdp & IXGBE_ESDP_SDP1)
- DPRINTK(PROBE, CRIT,
- "Fan has stopped, replace the adapter\n");
+ e_crit(probe, "Fan has stopped, replace the adapter\n");
}
/* reset_hw fills in the perm_addr as well */
round_jiffies(jiffies + (2 * HZ)));
err = 0;
} else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- dev_err(&adapter->pdev->dev, "failed to initialize because "
- "an unsupported SFP+ module type was detected.\n"
- "Reload the driver after installing a supported "
- "module.\n");
+ e_dev_err("failed to initialize because an unsupported SFP+ "
+ "module type was detected.\n");
+ e_dev_err("Reload the driver after installing a supported "
+ "module.\n");
goto err_sw_init;
} else if (err) {
- dev_err(&adapter->pdev->dev, "HW Init failed: %d\n", err);
+ e_dev_err("HW Init failed: %d\n", err);
goto err_sw_init;
}
/* make sure the EEPROM is good */
if (hw->eeprom.ops.validate_checksum(hw, NULL) < 0) {
- dev_err(&pdev->dev, "The EEPROM Checksum Is Not Valid\n");
+ e_dev_err("The EEPROM Checksum Is Not Valid\n");
err = -EIO;
goto err_eeprom;
}
memcpy(netdev->perm_addr, hw->mac.perm_addr, netdev->addr_len);
if (ixgbe_validate_mac_addr(netdev->perm_addr)) {
- dev_err(&pdev->dev, "invalid MAC address\n");
+ e_dev_err("invalid MAC address\n");
err = -EIO;
goto err_eeprom;
}
hw->mac.ops.get_bus_info(hw);
/* print bus type/speed/width info */
- dev_info(&pdev->dev, "(PCI Express:%s:%s) %pM\n",
+ e_dev_info("(PCI Express:%s:%s) %pM\n",
((hw->bus.speed == ixgbe_bus_speed_5000) ? "5.0Gb/s":
(hw->bus.speed == ixgbe_bus_speed_2500) ? "2.5Gb/s":"Unknown"),
((hw->bus.width == ixgbe_bus_width_pcie_x8) ? "Width x8" :
netdev->dev_addr);
ixgbe_read_pba_num_generic(hw, &part_num);
if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present)
- dev_info(&pdev->dev, "MAC: %d, PHY: %d, SFP+: %d, PBA No: %06x-%03x\n",
- hw->mac.type, hw->phy.type, hw->phy.sfp_type,
- (part_num >> 8), (part_num & 0xff));
+ e_dev_info("MAC: %d, PHY: %d, SFP+: %d, "
+ "PBA No: %06x-%03x\n",
+ hw->mac.type, hw->phy.type, hw->phy.sfp_type,
+ (part_num >> 8), (part_num & 0xff));
else
- dev_info(&pdev->dev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
- hw->mac.type, hw->phy.type,
- (part_num >> 8), (part_num & 0xff));
+ e_dev_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
+ hw->mac.type, hw->phy.type,
+ (part_num >> 8), (part_num & 0xff));
if (hw->bus.width <= ixgbe_bus_width_pcie_x4) {
- dev_warn(&pdev->dev, "PCI-Express bandwidth available for "
- "this card is not sufficient for optimal "
- "performance.\n");
- dev_warn(&pdev->dev, "For optimal performance a x8 "
- "PCI-Express slot is required.\n");
+ e_dev_warn("PCI-Express bandwidth available for this card is "
+ "not sufficient for optimal performance.\n");
+ e_dev_warn("For optimal performance a x8 PCI-Express slot "
+ "is required.\n");
}
/* save off EEPROM version number */
if (err == IXGBE_ERR_EEPROM_VERSION) {
/* We are running on a pre-production device, log a warning */
- dev_warn(&pdev->dev, "This device is a pre-production "
- "adapter/LOM. Please be aware there may be issues "
- "associated with your hardware. If you are "
- "experiencing problems please contact your Intel or "
- "hardware representative who provided you with this "
- "hardware.\n");
+ e_dev_warn("This device is a pre-production adapter/LOM. "
+ "Please be aware there may be issues associated "
+ "with your hardware. If you are experiencing "
+ "problems please contact your Intel or hardware "
+ "representative who provided you with this "
+ "hardware.\n");
}
strcpy(netdev->name, "eth%d");
err = register_netdev(netdev);
}
#endif
if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
- DPRINTK(PROBE, INFO, "IOV is enabled with %d VFs\n",
- adapter->num_vfs);
+ e_info(probe, "IOV is enabled with %d VFs\n", adapter->num_vfs);
for (i = 0; i < adapter->num_vfs; i++)
ixgbe_vf_configuration(pdev, (i | 0x10000000));
}
/* add san mac addr to netdev */
ixgbe_add_sanmac_netdev(netdev);
- dev_info(&pdev->dev, "Intel(R) 10 Gigabit Network Connection\n");
+ e_dev_info("Intel(R) 10 Gigabit Network Connection\n");
cards_found++;
return 0;
pci_release_selected_regions(pdev, pci_select_bars(pdev,
IORESOURCE_MEM));
- DPRINTK(PROBE, INFO, "complete\n");
+ e_dev_info("complete\n");
free_netdev(netdev);
int err;
if (pci_enable_device_mem(pdev)) {
- DPRINTK(PROBE, ERR,
- "Cannot re-enable PCI device after reset.\n");
+ e_err(probe, "Cannot re-enable PCI device after reset.\n");
result = PCI_ERS_RESULT_DISCONNECT;
} else {
pci_set_master(pdev);
err = pci_cleanup_aer_uncorrect_error_status(pdev);
if (err) {
- dev_err(&pdev->dev,
- "pci_cleanup_aer_uncorrect_error_status failed 0x%0x\n", err);
+ e_dev_err("pci_cleanup_aer_uncorrect_error_status "
+ "failed 0x%0x\n", err);
/* non-fatal, continue */
}
if (netif_running(netdev)) {
if (ixgbe_up(adapter)) {
- DPRINTK(PROBE, INFO, "ixgbe_up failed after reset\n");
+ e_info(probe, "ixgbe_up failed after reset\n");
return;
}
}
static int __init ixgbe_init_module(void)
{
int ret;
- printk(KERN_INFO "%s: %s - version %s\n", ixgbe_driver_name,
- ixgbe_driver_string, ixgbe_driver_version);
-
- printk(KERN_INFO "%s: %s\n", ixgbe_driver_name, ixgbe_copyright);
+ pr_info("%s - version %s\n", ixgbe_driver_string,
+ ixgbe_driver_version);
+ pr_info("%s\n", ixgbe_copyright);
#ifdef CONFIG_IXGBE_DCA
dca_register_notify(&dca_notifier);
}
#endif /* CONFIG_IXGBE_DCA */
-#ifdef DEBUG
+
/**
- * ixgbe_get_hw_dev_name - return device name string
+ * ixgbe_get_hw_dev return device
* used by hardware layer to print debugging information
**/
-char *ixgbe_get_hw_dev_name(struct ixgbe_hw *hw)
+struct net_device *ixgbe_get_hw_dev(struct ixgbe_hw *hw)
{
struct ixgbe_adapter *adapter = hw->back;
- return adapter->netdev->name;
+ return adapter->netdev;
}
-#endif
module_exit(ixgbe_exit_module);
/* ixgbe_main.c */
projects / deliverable / linux.git / blobdiff