comment "Wireless 802.11b ISA/PCI cards support"
depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
+config IPW2100
+ tristate "Intel PRO/Wireless 2100 Network Connection"
+ depends on NET_RADIO && PCI && IEEE80211
+ select FW_LOADER
+ ---help---
+ A driver for the Intel PRO/Wireless 2100 Network
+ Connection 802.11b wireless network adapter.
+
+ See <file:Documentation/networking/README.ipw2100> for information on
+ the capabilities currently enabled in this driver and for tips
+ for debugging issues and problems.
+
+ In order to use this driver, you will need a firmware image for it.
+ You can obtain the firmware from
+ <http://ipw2100.sf.net/>. Once you have the firmware image, you
+ will need to place it in /etc/firmware.
+
+ You will also very likely need the Wireless Tools in order to
+ configure your card:
+
+ <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+
+ If you want to compile the driver as a module ( = code which can be
+ inserted in and remvoed from the running kernel whenever you want),
+ say M here and read <file:Documentation/modules.txt>. The module
+ will be called ipw2100.ko.
+
+config IPW2100_PROMISC
+ bool "Enable promiscuous mode"
+ depends on IPW2100
+ ---help---
+ Enables promiscuous/monitor mode support for the ipw2100 driver.
+ With this feature compiled into the driver, you can switch to
+ promiscuous mode via the Wireless Tool's Monitor mode. While in this
+ mode, no packets can be sent.
+
+config IPW_DEBUG
+ bool "Enable full debugging output in IPW2100 module."
+ depends on IPW2100
+ ---help---
+ This option will enable debug tracing output for the IPW2100.
+
+ This will result in the kernel module being ~60k larger. You can
+ control which debug output is sent to the kernel log by setting the
+ value in
+
+ /sys/bus/pci/drivers/ipw2100/debug_level
+
+ This entry will only exist if this option is enabled.
+
+ If you are not trying to debug or develop the IPW2100 driver, you
+ most likely want to say N here.
+
+config IPW2200
+ tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
+ depends on IEEE80211 && PCI
+ select FW_LOADER
+ ---help---
+ A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network
+ Connection adapters.
+
+ See <file:Documentation/networking/README.ipw2200> for
+ information on the capabilities currently enabled in this
+ driver and for tips for debugging issues and problems.
+
+ In order to use this driver, you will need a firmware image for it.
+ You can obtain the firmware from
+ <http://ipw2200.sf.net/>. See the above referenced README.ipw2200
+ for information on where to install the firmare images.
+
+ You will also very likely need the Wireless Tools in order to
+ configure your card:
+
+ <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+
+ If you want to compile the driver as a module ( = code which can be
+ inserted in and remvoed from the running kernel whenever you want),
+ say M here and read <file:Documentation/modules.txt>. The module
+ will be called ipw2200.ko.
+
+config IPW_DEBUG
+ bool "Enable full debugging output in IPW2200 module."
+ depends on IPW2200
+ ---help---
+ This option will enable debug tracing output for the IPW2200.
+
+ This will result in the kernel module being ~100k larger. You can
+ control which debug output is sent to the kernel log by setting the
+ value in
+
+ /sys/bus/pci/drivers/ipw2200/debug_level
+
+ This entry will only exist if this option is enabled.
+
+ To set a value, simply echo an 8-byte hex value to the same file:
+
+ % echo 0x00000FFO > /sys/bus/pci/drivers/ipw2200/debug_level
+
+ You can find the list of debug mask values in
+ drivers/net/wireless/ipw2200.h
+
+ If you are not trying to debug or develop the IPW2200 driver, you
+ most likely want to say N here.
+
config AIRO
tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
depends on NET_RADIO && ISA && (PCI || BROKEN)
projects / deliverable / linux.git / blobdiff