+config IWLWIFI
+ bool
+ default n
+
+config IWLCORE
+ tristate "Intel Wireless Wifi Core"
+ depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
+ select IWLWIFI
+
+config IWLWIFI_LEDS
+ bool
+ default n
+
+config IWLWIFI_RFKILL
+ boolean "IWLWIFI RF kill support"
+ depends on IWLCORE
+ select RFKILL
+ select RFKILL_INPUT
+
config IWL4965
tristate "Intel Wireless WiFi 4965AGN"
- depends on m && PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
+ depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
select FW_LOADER
- default m
+ select IWLCORE
---help---
Select to build the driver supporting the:
This driver uses the kernel's mac80211 subsystem.
- See <file:Documentation/networking/README.iwlwifi> for
- information on the capabilities currently enabled in this
- driver and for tips for debugging any issues or problems.
-
In order to use this driver, you will need a microcode (uCode)
image for it. You can obtain the microcode from:
<http://intellinuxwireless.org/>.
- See the above referenced README.iwlwifi for information on where
- to install the microcode images.
+ The microcode is typically installed in /lib/firmware. You can
+ look in the hotplug script /etc/hotplug/firmware.agent to
+ determine which directory FIRMWARE_DIR is set to when the script
+ runs.
If you want to compile the driver as a module ( = code which can be
- inserted in and remvoed from the running kernel whenever you want),
+ inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. The
module will be called iwl4965.ko.
-config IWL4965_QOS
- bool "Enable Wireless QoS in iwl4965 driver"
+config IWL4965_HT
+ bool "Enable 802.11n HT features in iwl4965 driver"
+ depends on EXPERIMENTAL
+ depends on IWL4965
+ ---help---
+ This option enables IEEE 802.11n High Throughput features
+ for the iwl4965 driver.
+
+config IWL4965_LEDS
+ bool "Enable LEDS features in iwl4965 driver"
depends on IWL4965
- default y
+ select MAC80211_LEDS
+ select LEDS_CLASS
+ select IWLWIFI_LEDS
---help---
- This option will enable wireless quality of service (QoS) for the
- iw4965 driver.
+ This option enables LEDS for the iwlwifi drivers
+
config IWL4965_SPECTRUM_MEASUREMENT
- bool "Enable Spectrum Measurement in iw4965 driver"
+ bool "Enable Spectrum Measurement in iwl4965 driver"
depends on IWL4965
- default y
---help---
This option will enable spectrum measurement for the iwl4965 driver.
config IWL4965_SENSITIVITY
bool "Enable Sensitivity Calibration in iwl4965 driver"
depends on IWL4965
- default y
---help---
This option will enable sensitivity calibration for the iwl4965
driver.
-config IWL4965_HT
- bool "Enable 802.11n HT features in iwl4965 driver"
- depends on EXPERIMENTAL
- depends on IWL4965 && MAC80211_HT
- default n
- ---help---
- This option enables IEEE 802.11n High Throughput features
- for the iwl4965 driver.
-
-config IWL4965_DEBUG
+config IWLWIFI_DEBUG
bool "Enable full debugging output in iwl4965 driver"
depends on IWL4965
- default y
---help---
This option will enable debug tracing output for the iwl4965
driver.
as the debug information can assist others in helping you resolve
any problems you may encounter.
+config IWLWIFI_DEBUGFS
+ bool "Iwlwifi debugfs support"
+ depends on IWLCORE && IWLWIFI_DEBUG && MAC80211_DEBUGFS
+ ---help---
+ Enable creation of debugfs files for the iwlwifi drivers.
+
config IWL3945
tristate "Intel PRO/Wireless 3945ABG/BG Network Connection"
- depends on m && PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
+ depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
select FW_LOADER
- default m
+ select IWLWIFI
---help---
Select to build the driver supporting the:
This driver uses the kernel's mac80211 subsystem.
- See <file:Documentation/networking/README.iwlwifi> for
- information on the capabilities currently enabled in this
- driver and for tips for debugging any issues or problems.
-
In order to use this driver, you will need a microcode (uCode)
image for it. You can obtain the microcode from:
<http://intellinuxwireless.org/>.
- See the above referenced README.iwlwifi for information on where
- to install the microcode images.
+ The microcode is typically installed in /lib/firmware. You can
+ look in the hotplug script /etc/hotplug/firmware.agent to
+ determine which directory FIRMWARE_DIR is set to when the script
+ runs.
If you want to compile the driver as a module ( = code which can be
- inserted in and remvoed from the running kernel whenever you want),
+ inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. The
module will be called iwl3945.ko.
-config IWL3945_QOS
- bool "Enable Wireless QoS in iwl3945 driver"
- depends on IWL3945
- default y
- ---help---
- This option will enable wireless quality of service (QoS) for the
- iwl3945 driver.
-
config IWL3945_SPECTRUM_MEASUREMENT
bool "Enable Spectrum Measurement in iwl3945 drivers"
depends on IWL3945
- default y
---help---
This option will enable spectrum measurement for the iwl3945 driver.
+config IWL3945_LEDS
+ bool "Enable LEDS features in iwl3945 driver"
+ depends on IWL3945
+ select MAC80211_LEDS
+ select LEDS_CLASS
+ ---help---
+ This option enables LEDS for the iwl3945 driver.
+
config IWL3945_DEBUG
bool "Enable full debugging output in iwl3945 driver"
depends on IWL3945
- default y
---help---
This option will enable debug tracing output for the iwl3945
driver.
projects / deliverable / linux.git / blobdiff