#include <net/mac80211.h>
#include "iwl-eeprom.h"
-#include "iwl-dev.h" /* FIXME: remove */
#include "iwl-debug.h"
#include "iwl-core.h"
#include "iwl-io.h"
#include "iwl-power.h"
-#include "iwl-sta.h"
#include "iwl-agn.h"
-#include "iwl-helpers.h"
#include "iwl-shared.h"
#include "iwl-agn.h"
#include "iwl-trans.h"
if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
priv->cfg->sku & EEPROM_SKU_CAP_BAND_52GHZ) {
char buf[32];
- bus_get_hw_id(priv->bus, buf, sizeof(buf));
+ bus_get_hw_id(bus(priv), buf, sizeof(buf));
IWL_INFO(priv, "Incorrectly detected BG card as ABG. "
"Please send your %s to maintainer.\n", buf);
priv->cfg->sku &= ~EEPROM_SKU_CAP_BAND_52GHZ;
u16 beacon_int;
struct ieee80211_vif *vif = ctx->vif;
- conf = ieee80211_get_hw_conf(priv->hw);
+ conf = &priv->hw->conf;
lockdep_assert_held(&priv->shrd->mutex);
{
/*
* MULTI-FIXME
- * See iwl_mac_channel_switch.
+ * See iwlagn_mac_channel_switch.
*/
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
iwl_set_bit(bus(priv), CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
- bus_apm_config(priv->bus);
+ bus_apm_config(bus(priv));
/* Configure analog phase-lock-loop before activating to D0A */
if (priv->cfg->base_params->pll_cfg_val)
&statistics_cmd);
}
-int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
- const struct ieee80211_tx_queue_params *params)
-{
- struct iwl_priv *priv = hw->priv;
- struct iwl_rxon_context *ctx;
- unsigned long flags;
- int q;
-
- IWL_DEBUG_MAC80211(priv, "enter\n");
-
- if (!iwl_is_ready_rf(priv->shrd)) {
- IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
- return -EIO;
- }
-
- if (queue >= AC_NUM) {
- IWL_DEBUG_MAC80211(priv, "leave - queue >= AC_NUM %d\n", queue);
- return 0;
- }
-
- q = AC_NUM - 1 - queue;
-
- spin_lock_irqsave(&priv->shrd->lock, flags);
-
- /*
- * MULTI-FIXME
- * This may need to be done per interface in nl80211/cfg80211/mac80211.
- */
- for_each_context(priv, ctx) {
- ctx->qos_data.def_qos_parm.ac[q].cw_min =
- cpu_to_le16(params->cw_min);
- ctx->qos_data.def_qos_parm.ac[q].cw_max =
- cpu_to_le16(params->cw_max);
- ctx->qos_data.def_qos_parm.ac[q].aifsn = params->aifs;
- ctx->qos_data.def_qos_parm.ac[q].edca_txop =
- cpu_to_le16((params->txop * 32));
-
- ctx->qos_data.def_qos_parm.ac[q].reserved1 = 0;
- }
-
- spin_unlock_irqrestore(&priv->shrd->lock, flags);
-
- IWL_DEBUG_MAC80211(priv, "leave\n");
- return 0;
-}
-
-int iwl_mac_tx_last_beacon(struct ieee80211_hw *hw)
-{
- struct iwl_priv *priv = hw->priv;
-
- return priv->ibss_manager == IWL_IBSS_MANAGER;
-}
-
-static int iwl_set_mode(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
-{
- iwl_connection_init_rx_config(priv, ctx);
-
- iwlagn_set_rxon_chain(priv, ctx);
-
- return iwlagn_commit_rxon(priv, ctx);
-}
-
-static int iwl_setup_interface(struct iwl_priv *priv,
- struct iwl_rxon_context *ctx)
-{
- struct ieee80211_vif *vif = ctx->vif;
- int err;
-
- lockdep_assert_held(&priv->shrd->mutex);
-
- /*
- * This variable will be correct only when there's just
- * a single context, but all code using it is for hardware
- * that supports only one context.
- */
- priv->iw_mode = vif->type;
-
- ctx->is_active = true;
-
- err = iwl_set_mode(priv, ctx);
- if (err) {
- if (!ctx->always_active)
- ctx->is_active = false;
- return err;
- }
-
- if (priv->cfg->bt_params && priv->cfg->bt_params->advanced_bt_coexist &&
- vif->type == NL80211_IFTYPE_ADHOC) {
- /*
- * pretend to have high BT traffic as long as we
- * are operating in IBSS mode, as this will cause
- * the rate scaling etc. to behave as intended.
- */
- priv->bt_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
- }
-
- return 0;
-}
-
-int iwl_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
-{
- struct iwl_priv *priv = hw->priv;
- struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
- struct iwl_rxon_context *tmp, *ctx = NULL;
- int err;
- enum nl80211_iftype viftype = ieee80211_vif_type_p2p(vif);
-
- IWL_DEBUG_MAC80211(priv, "enter: type %d, addr %pM\n",
- viftype, vif->addr);
-
- cancel_delayed_work_sync(&priv->hw_roc_disable_work);
- mutex_lock(&priv->shrd->mutex);
- iwlagn_disable_roc(priv);
-
- if (!iwl_is_ready_rf(priv->shrd)) {
- IWL_WARN(priv, "Try to add interface when device not ready\n");
- err = -EINVAL;
- goto out;
- }
-
- for_each_context(priv, tmp) {
- u32 possible_modes =
- tmp->interface_modes | tmp->exclusive_interface_modes;
-
- if (tmp->vif) {
- /* check if this busy context is exclusive */
- if (tmp->exclusive_interface_modes &
- BIT(tmp->vif->type)) {
- err = -EINVAL;
- goto out;
- }
- continue;
- }
-
- if (!(possible_modes & BIT(viftype)))
- continue;
-
- /* have maybe usable context w/o interface */
- ctx = tmp;
- break;
- }
-
- if (!ctx) {
- err = -EOPNOTSUPP;
- goto out;
- }
-
- vif_priv->ctx = ctx;
- ctx->vif = vif;
-
- err = iwl_setup_interface(priv, ctx);
- if (!err)
- goto out;
-
- ctx->vif = NULL;
- priv->iw_mode = NL80211_IFTYPE_STATION;
- out:
- mutex_unlock(&priv->shrd->mutex);
-
- IWL_DEBUG_MAC80211(priv, "leave\n");
- return err;
-}
-
-static void iwl_teardown_interface(struct iwl_priv *priv,
- struct ieee80211_vif *vif,
- bool mode_change)
-{
- struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
-
- lockdep_assert_held(&priv->shrd->mutex);
-
- if (priv->scan_vif == vif) {
- iwl_scan_cancel_timeout(priv, 200);
- iwl_force_scan_end(priv);
- }
-
- if (!mode_change) {
- iwl_set_mode(priv, ctx);
- if (!ctx->always_active)
- ctx->is_active = false;
- }
-
- /*
- * When removing the IBSS interface, overwrite the
- * BT traffic load with the stored one from the last
- * notification, if any. If this is a device that
- * doesn't implement this, this has no effect since
- * both values are the same and zero.
- */
- if (vif->type == NL80211_IFTYPE_ADHOC)
- priv->bt_traffic_load = priv->last_bt_traffic_load;
-}
-
-void iwl_mac_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif)
-{
- struct iwl_priv *priv = hw->priv;
- struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
-
- IWL_DEBUG_MAC80211(priv, "enter\n");
-
- mutex_lock(&priv->shrd->mutex);
-
- if (WARN_ON(ctx->vif != vif)) {
- struct iwl_rxon_context *tmp;
- IWL_ERR(priv, "ctx->vif = %p, vif = %p\n", ctx->vif, vif);
- for_each_context(priv, tmp)
- IWL_ERR(priv, "\tID = %d:\tctx = %p\tctx->vif = %p\n",
- tmp->ctxid, tmp, tmp->vif);
- }
- ctx->vif = NULL;
-
- iwl_teardown_interface(priv, vif, false);
-
- mutex_unlock(&priv->shrd->mutex);
-
- IWL_DEBUG_MAC80211(priv, "leave\n");
-
-}
#ifdef CONFIG_IWLWIFI_DEBUGFS
return 0;
}
-int iwl_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
- enum nl80211_iftype newtype, bool newp2p)
-{
- struct iwl_priv *priv = hw->priv;
- struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
- struct iwl_rxon_context *bss_ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- struct iwl_rxon_context *tmp;
- enum nl80211_iftype newviftype = newtype;
- u32 interface_modes;
- int err;
-
- newtype = ieee80211_iftype_p2p(newtype, newp2p);
-
- mutex_lock(&priv->shrd->mutex);
-
- if (!ctx->vif || !iwl_is_ready_rf(priv->shrd)) {
- /*
- * Huh? But wait ... this can maybe happen when
- * we're in the middle of a firmware restart!
- */
- err = -EBUSY;
- goto out;
- }
-
- interface_modes = ctx->interface_modes | ctx->exclusive_interface_modes;
- if (!(interface_modes & BIT(newtype))) {
- err = -EBUSY;
- goto out;
- }
-
- /*
- * Refuse a change that should be done by moving from the PAN
- * context to the BSS context instead, if the BSS context is
- * available and can support the new interface type.
- */
- if (ctx->ctxid == IWL_RXON_CTX_PAN && !bss_ctx->vif &&
- (bss_ctx->interface_modes & BIT(newtype) ||
- bss_ctx->exclusive_interface_modes & BIT(newtype))) {
- BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
- err = -EBUSY;
- goto out;
- }
-
- if (ctx->exclusive_interface_modes & BIT(newtype)) {
- for_each_context(priv, tmp) {
- if (ctx == tmp)
- continue;
-
- if (!tmp->vif)
- continue;
-
- /*
- * The current mode switch would be exclusive, but
- * another context is active ... refuse the switch.
- */
- err = -EBUSY;
- goto out;
- }
- }
-
- /* success */
- iwl_teardown_interface(priv, vif, true);
- vif->type = newviftype;
- vif->p2p = newp2p;
- err = iwl_setup_interface(priv, ctx);
- WARN_ON(err);
- /*
- * We've switched internally, but submitting to the
- * device may have failed for some reason. Mask this
- * error, because otherwise mac80211 will not switch
- * (and set the interface type back) and we'll be
- * out of sync with it.
- */
- err = 0;
+int iwl_cmd_echo_test(struct iwl_priv *priv)
+{
+ int ret;
+ struct iwl_host_cmd cmd = {
+ .id = REPLY_ECHO,
+ .len = { 0 },
+ .flags = CMD_SYNC,
+ };
- out:
- mutex_unlock(&priv->shrd->mutex);
- return err;
+ ret = iwl_trans_send_cmd(trans(priv), &cmd);
+ if (ret)
+ IWL_ERR(priv, "echo testing fail: 0X%x\n", ret);
+ else
+ IWL_DEBUG_INFO(priv, "echo testing pass\n");
+ return ret;
}
static inline int iwl_check_stuck_queue(struct iwl_priv *priv, int txq)
{
if (iwl_trans_check_stuck_queue(trans(priv), txq)) {
- int ret = iwl_force_reset(priv, IWL_FW_RESET, false);
+ int ret;
+ ret = iwl_force_reset(priv, IWL_FW_RESET, false);
return (ret == -EAGAIN) ? 0 : 1;
}
return 0;
if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
return;
+ if (iwl_is_rfkill(priv->shrd))
+ return;
+
timeout = priv->cfg->base_params->wd_timeout;
if (timeout == 0)
return;
del_timer(&priv->watchdog);
}
+/**
+ * iwl_beacon_time_mask_low - mask of lower 32 bit of beacon time
+ * @priv -- pointer to iwl_priv data structure
+ * @tsf_bits -- number of bits need to shift for masking)
+ */
+static inline u32 iwl_beacon_time_mask_low(struct iwl_priv *priv,
+ u16 tsf_bits)
+{
+ return (1 << tsf_bits) - 1;
+}
+
+/**
+ * iwl_beacon_time_mask_high - mask of higher 32 bit of beacon time
+ * @priv -- pointer to iwl_priv data structure
+ * @tsf_bits -- number of bits need to shift for masking)
+ */
+static inline u32 iwl_beacon_time_mask_high(struct iwl_priv *priv,
+ u16 tsf_bits)
+{
+ return ((1 << (32 - tsf_bits)) - 1) << tsf_bits;
+}
+
/*
* extended beacon time format
* time in usec will be changed into a 32-bit value in extended:internal format
projects / deliverable / linux.git / blobdiff