#include <linux/module.h>
#include "iwl-drv.h"
+#include "iwl-debug.h"
#include "iwl-trans.h"
-#include "iwl-shared.h"
#include "iwl-op-mode.h"
#include "iwl-agn-hw.h"
+#include "iwl-fw.h"
+#include "iwl-config.h"
+#include "iwl-modparams.h"
/* private includes */
#include "iwl-fw-file.h"
/**
* struct iwl_drv - drv common data
* @fw: the iwl_fw structure
- * @shrd: pointer to common shared structure
* @op_mode: the running op_mode
* @trans: transport layer
+ * @dev: for debug prints only
* @cfg: configuration struct
* @fw_index: firmware revision to try loading
* @firmware_name: composite filename of ucode file to load
struct iwl_drv {
struct iwl_fw fw;
- struct iwl_shared *shrd;
struct iwl_op_mode *op_mode;
struct iwl_trans *trans;
+ struct device *dev;
const struct iwl_cfg *cfg;
int fw_index; /* firmware we're trying to load */
device_release_driver(drv->trans->dev);
}
-struct iwl_drv *iwl_drv_start(struct iwl_shared *shrd,
- struct iwl_trans *trans,
+struct iwl_drv *iwl_drv_start(struct iwl_trans *trans,
const struct iwl_cfg *cfg)
{
struct iwl_drv *drv;
int ret;
drv = kzalloc(sizeof(*drv), GFP_KERNEL);
- if (!drv) {
- dev_printk(KERN_ERR, trans->dev, "Couldn't allocate iwl_drv");
+ if (!drv)
return NULL;
- }
- /* For printing only - temporary until we change the logger */
- drv->shrd = shrd;
+
drv->trans = trans;
+ drv->dev = trans->dev;
drv->cfg = cfg;
init_completion(&drv->request_firmware_complete);
ret = iwl_request_firmware(drv, true);
if (ret) {
- dev_printk(KERN_ERR, trans->dev, "Couldn't request the fw");
+ IWL_ERR(trans, "Couldn't request the fw\n");
kfree(drv);
drv = NULL;
}
kfree(drv);
}
+
+
+/* shared module parameters */
+struct iwl_mod_params iwlwifi_mod_params = {
+ .amsdu_size_8K = 1,
+ .restart_fw = 1,
+ .plcp_check = true,
+ .bt_coex_active = true,
+ .power_level = IWL_POWER_INDEX_1,
+ .bt_ch_announce = true,
+ .auto_agg = true,
+ /* the rest are 0 by default */
+};
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+module_param_named(debug, iwlwifi_mod_params.debug_level, uint,
+ S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "debug output mask");
+#endif
+
+module_param_named(swcrypto, iwlwifi_mod_params.sw_crypto, int, S_IRUGO);
+MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
+module_param_named(11n_disable, iwlwifi_mod_params.disable_11n, uint, S_IRUGO);
+MODULE_PARM_DESC(11n_disable,
+ "disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX");
+module_param_named(amsdu_size_8K, iwlwifi_mod_params.amsdu_size_8K,
+ int, S_IRUGO);
+MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
+module_param_named(fw_restart, iwlwifi_mod_params.restart_fw, int, S_IRUGO);
+MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
+
+module_param_named(antenna_coupling, iwlwifi_mod_params.ant_coupling,
+ int, S_IRUGO);
+MODULE_PARM_DESC(antenna_coupling,
+ "specify antenna coupling in dB (defualt: 0 dB)");
+
+module_param_named(bt_ch_inhibition, iwlwifi_mod_params.bt_ch_announce,
+ bool, S_IRUGO);
+MODULE_PARM_DESC(bt_ch_inhibition,
+ "Enable BT channel inhibition (default: enable)");
+
+module_param_named(plcp_check, iwlwifi_mod_params.plcp_check, bool, S_IRUGO);
+MODULE_PARM_DESC(plcp_check, "Check plcp health (default: 1 [enabled])");
+
+module_param_named(wd_disable, iwlwifi_mod_params.wd_disable, int, S_IRUGO);
+MODULE_PARM_DESC(wd_disable,
+ "Disable stuck queue watchdog timer 0=system default, "
+ "1=disable, 2=enable (default: 0)");
+
+/*
+ * set bt_coex_active to true, uCode will do kill/defer
+ * every time the priority line is asserted (BT is sending signals on the
+ * priority line in the PCIx).
+ * set bt_coex_active to false, uCode will ignore the BT activity and
+ * perform the normal operation
+ *
+ * User might experience transmit issue on some platform due to WiFi/BT
+ * co-exist problem. The possible behaviors are:
+ * Able to scan and finding all the available AP
+ * Not able to associate with any AP
+ * On those platforms, WiFi communication can be restored by set
+ * "bt_coex_active" module parameter to "false"
+ *
+ * default: bt_coex_active = true (BT_COEX_ENABLE)
+ */
+module_param_named(bt_coex_active, iwlwifi_mod_params.bt_coex_active,
+ bool, S_IRUGO);
+MODULE_PARM_DESC(bt_coex_active, "enable wifi/bt co-exist (default: enable)");
+
+module_param_named(led_mode, iwlwifi_mod_params.led_mode, int, S_IRUGO);
+MODULE_PARM_DESC(led_mode, "0=system default, "
+ "1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0)");
+
+module_param_named(power_save, iwlwifi_mod_params.power_save,
+ bool, S_IRUGO);
+MODULE_PARM_DESC(power_save,
+ "enable WiFi power management (default: disable)");
+
+module_param_named(power_level, iwlwifi_mod_params.power_level,
+ int, S_IRUGO);
+MODULE_PARM_DESC(power_level,
+ "default power save level (range from 1 - 5, default: 1)");
+
+module_param_named(auto_agg, iwlwifi_mod_params.auto_agg,
+ bool, S_IRUGO);
+MODULE_PARM_DESC(auto_agg,
+ "enable agg w/o check traffic load (default: enable)");
+
+module_param_named(5ghz_disable, iwlwifi_mod_params.disable_5ghz,
+ bool, S_IRUGO);
+MODULE_PARM_DESC(5ghz_disable, "disable 5GHz band (default: 0 [enabled])");
projects / deliverable / linux.git / blobdiff