*
*****************************************************************************/
+#include <linux/etherdevice.h>
#include <net/mac80211.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
}
EXPORT_SYMBOL(iwl_hw_txq_free_tfd);
+
+int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, void *ptr,
+ dma_addr_t addr, u16 len)
+{
+ int index, is_odd;
+ struct iwl_tfd_frame *tfd = ptr;
+ u32 num_tbs = IWL_GET_BITS(*tfd, num_tbs);
+
+ /* Each TFD can point to a maximum 20 Tx buffers */
+ if ((num_tbs >= MAX_NUM_OF_TBS) || (num_tbs < 0)) {
+ IWL_ERROR("Error can not send more than %d chunks\n",
+ MAX_NUM_OF_TBS);
+ return -EINVAL;
+ }
+
+ index = num_tbs / 2;
+ is_odd = num_tbs & 0x1;
+
+ if (!is_odd) {
+ tfd->pa[index].tb1_addr = cpu_to_le32(addr);
+ IWL_SET_BITS(tfd->pa[index], tb1_addr_hi,
+ iwl_get_dma_hi_address(addr));
+ IWL_SET_BITS(tfd->pa[index], tb1_len, len);
+ } else {
+ IWL_SET_BITS(tfd->pa[index], tb2_addr_lo16,
+ (u32) (addr & 0xffff));
+ IWL_SET_BITS(tfd->pa[index], tb2_addr_hi20, addr >> 16);
+ IWL_SET_BITS(tfd->pa[index], tb2_len, len);
+ }
+
+ IWL_SET_BITS(*tfd, num_tbs, num_tbs + 1);
+
+ return 0;
+}
+EXPORT_SYMBOL(iwl_hw_txq_attach_buf_to_tfd);
+
+/**
+ * iwl_txq_update_write_ptr - Send new write index to hardware
+ */
+int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq)
+{
+ u32 reg = 0;
+ int ret = 0;
+ int txq_id = txq->q.id;
+
+ if (txq->need_update == 0)
+ return ret;
+
+ /* if we're trying to save power */
+ if (test_bit(STATUS_POWER_PMI, &priv->status)) {
+ /* wake up nic if it's powered down ...
+ * uCode will wake up, and interrupt us again, so next
+ * time we'll skip this part. */
+ reg = iwl_read32(priv, CSR_UCODE_DRV_GP1);
+
+ if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
+ IWL_DEBUG_INFO("Requesting wakeup, GP1 = 0x%x\n", reg);
+ iwl_set_bit(priv, CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+ return ret;
+ }
+
+ /* restore this queue's parameters in nic hardware. */
+ ret = iwl_grab_nic_access(priv);
+ if (ret)
+ return ret;
+ iwl_write_direct32(priv, HBUS_TARG_WRPTR,
+ txq->q.write_ptr | (txq_id << 8));
+ iwl_release_nic_access(priv);
+
+ /* else not in power-save mode, uCode will never sleep when we're
+ * trying to tx (during RFKILL, we're not trying to tx). */
+ } else
+ iwl_write32(priv, HBUS_TARG_WRPTR,
+ txq->q.write_ptr | (txq_id << 8));
+
+ txq->need_update = 0;
+
+ return ret;
+}
+EXPORT_SYMBOL(iwl_txq_update_write_ptr);
+
+
/**
* iwl_tx_queue_free - Deallocate DMA queue.
* @txq: Transmit queue to deallocate.
*/
static void iwl_tx_queue_free(struct iwl_priv *priv, struct iwl_tx_queue *txq)
{
- struct iwl4965_queue *q = &txq->q;
+ struct iwl_queue *q = &txq->q;
struct pci_dev *dev = priv->pci_dev;
int len;
memset(txq, 0, sizeof(*txq));
}
+/*************** DMA-QUEUE-GENERAL-FUNCTIONS *****
+ * DMA services
+ *
+ * Theory of operation
+ *
+ * A Tx or Rx queue resides in host DRAM, and is comprised of a circular buffer
+ * of buffer descriptors, each of which points to one or more data buffers for
+ * the device to read from or fill. Driver and device exchange status of each
+ * queue via "read" and "write" pointers. Driver keeps minimum of 2 empty
+ * entries in each circular buffer, to protect against confusing empty and full
+ * queue states.
+ *
+ * The device reads or writes the data in the queues via the device's several
+ * DMA/FIFO channels. Each queue is mapped to a single DMA channel.
+ *
+ * For Tx queue, there are low mark and high mark limits. If, after queuing
+ * the packet for Tx, free space become < low mark, Tx queue stopped. When
+ * reclaiming packets (on 'tx done IRQ), if free space become > high mark,
+ * Tx queue resumed.
+ *
+ * See more detailed info in iwl-4965-hw.h.
+ ***************************************************/
+
+int iwl_queue_space(const struct iwl_queue *q)
+{
+ int s = q->read_ptr - q->write_ptr;
+
+ if (q->read_ptr > q->write_ptr)
+ s -= q->n_bd;
+
+ if (s <= 0)
+ s += q->n_window;
+ /* keep some reserve to not confuse empty and full situations */
+ s -= 2;
+ if (s < 0)
+ s = 0;
+ return s;
+}
+EXPORT_SYMBOL(iwl_queue_space);
+
+
/**
* iwl_hw_txq_ctx_free - Free TXQ Context
*
/**
* iwl_queue_init - Initialize queue's high/low-water and read/write indexes
*/
-static int iwl_queue_init(struct iwl_priv *priv, struct iwl4965_queue *q,
+static int iwl_queue_init(struct iwl_priv *priv, struct iwl_queue *q,
int count, int slots_num, u32 id)
{
q->n_bd = count;
error_kw:
return ret;
}
+
+/*
+ * handle build REPLY_TX command notification.
+ */
+static void iwl_tx_cmd_build_basic(struct iwl_priv *priv,
+ struct iwl_tx_cmd *tx_cmd,
+ struct ieee80211_tx_info *info,
+ struct ieee80211_hdr *hdr,
+ int is_unicast, u8 std_id)
+{
+ u16 fc = le16_to_cpu(hdr->frame_control);
+ __le32 tx_flags = tx_cmd->tx_flags;
+
+ tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+ tx_flags |= TX_CMD_FLG_ACK_MSK;
+ if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT)
+ tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
+ if (ieee80211_is_probe_response(fc) &&
+ !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
+ tx_flags |= TX_CMD_FLG_TSF_MSK;
+ } else {
+ tx_flags &= (~TX_CMD_FLG_ACK_MSK);
+ tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
+ }
+
+ if (ieee80211_is_back_request(fc))
+ tx_flags |= TX_CMD_FLG_ACK_MSK | TX_CMD_FLG_IMM_BA_RSP_MASK;
+
+
+ tx_cmd->sta_id = std_id;
+ if (ieee80211_get_morefrag(hdr))
+ tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
+
+ if (ieee80211_is_qos_data(fc)) {
+ u8 *qc = ieee80211_get_qos_ctrl(hdr, ieee80211_get_hdrlen(fc));
+ tx_cmd->tid_tspec = qc[0] & 0xf;
+ tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
+ } else {
+ tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
+ }
+
+ if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
+ tx_flags |= TX_CMD_FLG_RTS_MSK;
+ tx_flags &= ~TX_CMD_FLG_CTS_MSK;
+ } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
+ tx_flags &= ~TX_CMD_FLG_RTS_MSK;
+ tx_flags |= TX_CMD_FLG_CTS_MSK;
+ }
+
+ if ((tx_flags & TX_CMD_FLG_RTS_MSK) || (tx_flags & TX_CMD_FLG_CTS_MSK))
+ tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
+
+ tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
+ if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) {
+ if ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_ASSOC_REQ ||
+ (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_REASSOC_REQ)
+ tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
+ else
+ tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
+ } else {
+ tx_cmd->timeout.pm_frame_timeout = 0;
+ }
+
+ tx_cmd->driver_txop = 0;
+ tx_cmd->tx_flags = tx_flags;
+ tx_cmd->next_frame_len = 0;
+}
+
+#define RTS_HCCA_RETRY_LIMIT 3
+#define RTS_DFAULT_RETRY_LIMIT 60
+
+static void iwl_tx_cmd_build_rate(struct iwl_priv *priv,
+ struct iwl_tx_cmd *tx_cmd,
+ struct ieee80211_tx_info *info,
+ u16 fc, int sta_id,
+ int is_hcca)
+{
+ u8 rts_retry_limit = 0;
+ u8 data_retry_limit = 0;
+ u8 rate_plcp;
+ u16 rate_flags = 0;
+ int rate_idx;
+
+ rate_idx = min(ieee80211_get_tx_rate(priv->hw, info)->hw_value & 0xffff,
+ IWL_RATE_COUNT - 1);
+
+ rate_plcp = iwl_rates[rate_idx].plcp;
+
+ rts_retry_limit = (is_hcca) ?
+ RTS_HCCA_RETRY_LIMIT : RTS_DFAULT_RETRY_LIMIT;
+
+ if ((rate_idx >= IWL_FIRST_CCK_RATE) && (rate_idx <= IWL_LAST_CCK_RATE))
+ rate_flags |= RATE_MCS_CCK_MSK;
+
+
+ if (ieee80211_is_probe_response(fc)) {
+ data_retry_limit = 3;
+ if (data_retry_limit < rts_retry_limit)
+ rts_retry_limit = data_retry_limit;
+ } else
+ data_retry_limit = IWL_DEFAULT_TX_RETRY;
+
+ if (priv->data_retry_limit != -1)
+ data_retry_limit = priv->data_retry_limit;
+
+
+ if (ieee80211_is_data(fc)) {
+ tx_cmd->initial_rate_index = 0;
+ tx_cmd->tx_flags |= TX_CMD_FLG_STA_RATE_MSK;
+ } else {
+ switch (fc & IEEE80211_FCTL_STYPE) {
+ case IEEE80211_STYPE_AUTH:
+ case IEEE80211_STYPE_DEAUTH:
+ case IEEE80211_STYPE_ASSOC_REQ:
+ case IEEE80211_STYPE_REASSOC_REQ:
+ if (tx_cmd->tx_flags & TX_CMD_FLG_RTS_MSK) {
+ tx_cmd->tx_flags &= ~TX_CMD_FLG_RTS_MSK;
+ tx_cmd->tx_flags |= TX_CMD_FLG_CTS_MSK;
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Alternate between antenna A and B for successive frames */
+ if (priv->use_ant_b_for_management_frame) {
+ priv->use_ant_b_for_management_frame = 0;
+ rate_flags |= RATE_MCS_ANT_B_MSK;
+ } else {
+ priv->use_ant_b_for_management_frame = 1;
+ rate_flags |= RATE_MCS_ANT_A_MSK;
+ }
+ }
+
+ tx_cmd->rts_retry_limit = rts_retry_limit;
+ tx_cmd->data_retry_limit = data_retry_limit;
+ tx_cmd->rate_n_flags = iwl4965_hw_set_rate_n_flags(rate_plcp, rate_flags);
+}
+
+static void iwl_tx_cmd_build_hwcrypto(struct iwl_priv *priv,
+ struct ieee80211_tx_info *info,
+ struct iwl_tx_cmd *tx_cmd,
+ struct sk_buff *skb_frag,
+ int sta_id)
+{
+ struct ieee80211_key_conf *keyconf = info->control.hw_key;
+
+ switch (keyconf->alg) {
+ case ALG_CCMP:
+ tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
+ memcpy(tx_cmd->key, keyconf->key, keyconf->keylen);
+ if (info->flags & IEEE80211_TX_CTL_AMPDU)
+ tx_cmd->tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK;
+ IWL_DEBUG_TX("tx_cmd with aes hwcrypto\n");
+ break;
+
+ case ALG_TKIP:
+ tx_cmd->sec_ctl = TX_CMD_SEC_TKIP;
+ ieee80211_get_tkip_key(keyconf, skb_frag,
+ IEEE80211_TKIP_P2_KEY, tx_cmd->key);
+ IWL_DEBUG_TX("tx_cmd with tkip hwcrypto\n");
+ break;
+
+ case ALG_WEP:
+ tx_cmd->sec_ctl |= (TX_CMD_SEC_WEP |
+ (keyconf->keyidx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT);
+
+ if (keyconf->keylen == WEP_KEY_LEN_128)
+ tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
+
+ memcpy(&tx_cmd->key[3], keyconf->key, keyconf->keylen);
+
+ IWL_DEBUG_TX("Configuring packet for WEP encryption "
+ "with key %d\n", keyconf->keyidx);
+ break;
+
+ default:
+ printk(KERN_ERR "Unknown encode alg %d\n", keyconf->alg);
+ break;
+ }
+}
+
+static void iwl_update_tx_stats(struct iwl_priv *priv, u16 fc, u16 len)
+{
+ /* 0 - mgmt, 1 - cnt, 2 - data */
+ int idx = (fc & IEEE80211_FCTL_FTYPE) >> 2;
+ priv->tx_stats[idx].cnt++;
+ priv->tx_stats[idx].bytes += len;
+}
+
+/*
+ * start REPLY_TX command process
+ */
+int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
+{
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct iwl_tfd_frame *tfd;
+ u32 *control_flags;
+ int txq_id = skb_get_queue_mapping(skb);
+ struct iwl_tx_queue *txq = NULL;
+ struct iwl_queue *q = NULL;
+ dma_addr_t phys_addr;
+ dma_addr_t txcmd_phys;
+ dma_addr_t scratch_phys;
+ struct iwl_cmd *out_cmd = NULL;
+ struct iwl_tx_cmd *tx_cmd;
+ u16 len, idx, len_org;
+ u16 seq_number = 0;
+ u8 id, hdr_len, unicast;
+ u8 sta_id;
+ u16 fc;
+ u8 wait_write_ptr = 0;
+ u8 tid = 0;
+ u8 *qc = NULL;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (iwl_is_rfkill(priv)) {
+ IWL_DEBUG_DROP("Dropping - RF KILL\n");
+ goto drop_unlock;
+ }
+
+ if (!priv->vif) {
+ IWL_DEBUG_DROP("Dropping - !priv->vif\n");
+ goto drop_unlock;
+ }
+
+ if ((ieee80211_get_tx_rate(priv->hw, info)->hw_value & 0xFF) ==
+ IWL_INVALID_RATE) {
+ IWL_ERROR("ERROR: No TX rate available.\n");
+ goto drop_unlock;
+ }
+
+ unicast = !is_multicast_ether_addr(hdr->addr1);
+ id = 0;
+
+ fc = le16_to_cpu(hdr->frame_control);
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if (ieee80211_is_auth(fc))
+ IWL_DEBUG_TX("Sending AUTH frame\n");
+ else if (ieee80211_is_assoc_request(fc))
+ IWL_DEBUG_TX("Sending ASSOC frame\n");
+ else if (ieee80211_is_reassoc_request(fc))
+ IWL_DEBUG_TX("Sending REASSOC frame\n");
+#endif
+
+ /* drop all data frame if we are not associated */
+ if (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) &&
+ (!iwl_is_associated(priv) ||
+ ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && !priv->assoc_id) ||
+ !priv->assoc_station_added)) {
+ IWL_DEBUG_DROP("Dropping - !iwl_is_associated\n");
+ goto drop_unlock;
+ }
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ hdr_len = ieee80211_get_hdrlen(fc);
+
+ /* Find (or create) index into station table for destination station */
+ sta_id = iwl_get_sta_id(priv, hdr);
+ if (sta_id == IWL_INVALID_STATION) {
+ DECLARE_MAC_BUF(mac);
+
+ IWL_DEBUG_DROP("Dropping - INVALID STATION: %s\n",
+ print_mac(mac, hdr->addr1));
+ goto drop;
+ }
+
+ IWL_DEBUG_TX("station Id %d\n", sta_id);
+
+ if (ieee80211_is_qos_data(fc)) {
+ qc = ieee80211_get_qos_ctrl(hdr, hdr_len);
+ tid = qc[0] & 0xf;
+ seq_number = priv->stations[sta_id].tid[tid].seq_number &
+ IEEE80211_SCTL_SEQ;
+ hdr->seq_ctrl = cpu_to_le16(seq_number) |
+ (hdr->seq_ctrl &
+ __constant_cpu_to_le16(IEEE80211_SCTL_FRAG));
+ seq_number += 0x10;
+#ifdef CONFIG_IWL4965_HT
+ /* aggregation is on for this <sta,tid> */
+ if (info->flags & IEEE80211_TX_CTL_AMPDU)
+ txq_id = priv->stations[sta_id].tid[tid].agg.txq_id;
+ priv->stations[sta_id].tid[tid].tfds_in_queue++;
+#endif /* CONFIG_IWL4965_HT */
+ }
+
+ /* Descriptor for chosen Tx queue */
+ txq = &priv->txq[txq_id];
+ q = &txq->q;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ /* Set up first empty TFD within this queue's circular TFD buffer */
+ tfd = &txq->bd[q->write_ptr];
+ memset(tfd, 0, sizeof(*tfd));
+ control_flags = (u32 *) tfd;
+ idx = get_cmd_index(q, q->write_ptr, 0);
+
+ /* Set up driver data for this TFD */
+ memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl_tx_info));
+ txq->txb[q->write_ptr].skb[0] = skb;
+
+ /* Set up first empty entry in queue's array of Tx/cmd buffers */
+ out_cmd = &txq->cmd[idx];
+ tx_cmd = &out_cmd->cmd.tx;
+ memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
+ memset(tx_cmd, 0, sizeof(struct iwl_tx_cmd));
+
+ /*
+ * Set up the Tx-command (not MAC!) header.
+ * Store the chosen Tx queue and TFD index within the sequence field;
+ * after Tx, uCode's Tx response will return this value so driver can
+ * locate the frame within the tx queue and do post-tx processing.
+ */
+ out_cmd->hdr.cmd = REPLY_TX;
+ out_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) |
+ INDEX_TO_SEQ(q->write_ptr)));
+
+ /* Copy MAC header from skb into command buffer */
+ memcpy(tx_cmd->hdr, hdr, hdr_len);
+
+ /*
+ * Use the first empty entry in this queue's command buffer array
+ * to contain the Tx command and MAC header concatenated together
+ * (payload data will be in another buffer).
+ * Size of this varies, due to varying MAC header length.
+ * If end is not dword aligned, we'll have 2 extra bytes at the end
+ * of the MAC header (device reads on dword boundaries).
+ * We'll tell device about this padding later.
+ */
+ len = sizeof(struct iwl_tx_cmd) +
+ sizeof(struct iwl_cmd_header) + hdr_len;
+
+ len_org = len;
+ len = (len + 3) & ~3;
+
+ if (len_org != len)
+ len_org = 1;
+ else
+ len_org = 0;
+
+ /* Physical address of this Tx command's header (not MAC header!),
+ * within command buffer array. */
+ txcmd_phys = txq->dma_addr_cmd + sizeof(struct iwl_cmd) * idx +
+ offsetof(struct iwl_cmd, hdr);
+
+ /* Add buffer containing Tx command and MAC(!) header to TFD's
+ * first entry */
+ iwl_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len);
+
+ if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
+ iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id);
+
+ /* Set up TFD's 2nd entry to point directly to remainder of skb,
+ * if any (802.11 null frames have no payload). */
+ len = skb->len - hdr_len;
+ if (len) {
+ phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len,
+ len, PCI_DMA_TODEVICE);
+ iwl_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, len);
+ }
+
+ /* Tell NIC about any 2-byte padding after MAC header */
+ if (len_org)
+ tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK;
+
+ /* Total # bytes to be transmitted */
+ len = (u16)skb->len;
+ tx_cmd->len = cpu_to_le16(len);
+ /* TODO need this for burst mode later on */
+ iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, unicast, sta_id);
+
+ /* set is_hcca to 0; it probably will never be implemented */
+ iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc, sta_id, 0);
+
+ iwl_update_tx_stats(priv, fc, len);
+
+ scratch_phys = txcmd_phys + sizeof(struct iwl_cmd_header) +
+ offsetof(struct iwl_tx_cmd, scratch);
+ tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys);
+ tx_cmd->dram_msb_ptr = iwl_get_dma_hi_address(scratch_phys);
+
+ if (!ieee80211_get_morefrag(hdr)) {
+ txq->need_update = 1;
+ if (qc)
+ priv->stations[sta_id].tid[tid].seq_number = seq_number;
+ } else {
+ wait_write_ptr = 1;
+ txq->need_update = 0;
+ }
+
+ iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd, sizeof(*tx_cmd));
+
+ iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len);
+
+ /* Set up entry for this TFD in Tx byte-count array */
+ priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, len);
+
+ /* Tell device the write index *just past* this latest filled TFD */
+ q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
+ ret = iwl_txq_update_write_ptr(priv, txq);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ if (ret)
+ return ret;
+
+ if ((iwl_queue_space(q) < q->high_mark)
+ && priv->mac80211_registered) {
+ if (wait_write_ptr) {
+ spin_lock_irqsave(&priv->lock, flags);
+ txq->need_update = 1;
+ iwl_txq_update_write_ptr(priv, txq);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ }
+
+ ieee80211_stop_queue(priv->hw, skb_get_queue_mapping(skb));
+ }
+
+ return 0;
+
+drop_unlock:
+ spin_unlock_irqrestore(&priv->lock, flags);
+drop:
+ return -1;
+}
+EXPORT_SYMBOL(iwl_tx_skb);
+
+/*************** HOST COMMAND QUEUE FUNCTIONS *****/
+
+/**
+ * iwl_enqueue_hcmd - enqueue a uCode command
+ * @priv: device private data point
+ * @cmd: a point to the ucode command structure
+ *
+ * The function returns < 0 values to indicate the operation is
+ * failed. On success, it turns the index (> 0) of command in the
+ * command queue.
+ */
+int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
+{
+ struct iwl_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM];
+ struct iwl_queue *q = &txq->q;
+ struct iwl_tfd_frame *tfd;
+ u32 *control_flags;
+ struct iwl_cmd *out_cmd;
+ u32 idx;
+ u16 fix_size;
+ dma_addr_t phys_addr;
+ int ret;
+ unsigned long flags;
+
+ cmd->len = priv->cfg->ops->utils->get_hcmd_size(cmd->id, cmd->len);
+ fix_size = (u16)(cmd->len + sizeof(out_cmd->hdr));
+
+ /* If any of the command structures end up being larger than
+ * the TFD_MAX_PAYLOAD_SIZE, and it sent as a 'small' command then
+ * we will need to increase the size of the TFD entries */
+ BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) &&
+ !(cmd->meta.flags & CMD_SIZE_HUGE));
+
+ if (iwl_is_rfkill(priv)) {
+ IWL_DEBUG_INFO("Not sending command - RF KILL");
+ return -EIO;
+ }
+
+ if (iwl_queue_space(q) < ((cmd->meta.flags & CMD_ASYNC) ? 2 : 1)) {
+ IWL_ERROR("No space for Tx\n");
+ return -ENOSPC;
+ }
+
+ spin_lock_irqsave(&priv->hcmd_lock, flags);
+
+ tfd = &txq->bd[q->write_ptr];
+ memset(tfd, 0, sizeof(*tfd));
+
+ control_flags = (u32 *) tfd;
+
+ idx = get_cmd_index(q, q->write_ptr, cmd->meta.flags & CMD_SIZE_HUGE);
+ out_cmd = &txq->cmd[idx];
+
+ out_cmd->hdr.cmd = cmd->id;
+ memcpy(&out_cmd->meta, &cmd->meta, sizeof(cmd->meta));
+ memcpy(&out_cmd->cmd.payload, cmd->data, cmd->len);
+
+ /* At this point, the out_cmd now has all of the incoming cmd
+ * information */
+
+ out_cmd->hdr.flags = 0;
+ out_cmd->hdr.sequence = cpu_to_le16(QUEUE_TO_SEQ(IWL_CMD_QUEUE_NUM) |
+ INDEX_TO_SEQ(q->write_ptr));
+ if (out_cmd->meta.flags & CMD_SIZE_HUGE)
+ out_cmd->hdr.sequence |= cpu_to_le16(SEQ_HUGE_FRAME);
+
+ phys_addr = txq->dma_addr_cmd + sizeof(txq->cmd[0]) * idx +
+ offsetof(struct iwl_cmd, hdr);
+ iwl_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, fix_size);
+
+ IWL_DEBUG_HC("Sending command %s (#%x), seq: 0x%04X, "
+ "%d bytes at %d[%d]:%d\n",
+ get_cmd_string(out_cmd->hdr.cmd),
+ out_cmd->hdr.cmd, le16_to_cpu(out_cmd->hdr.sequence),
+ fix_size, q->write_ptr, idx, IWL_CMD_QUEUE_NUM);
+
+ txq->need_update = 1;
+
+ /* Set up entry in queue's byte count circular buffer */
+ priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, 0);
+
+ /* Increment and update queue's write index */
+ q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
+ ret = iwl_txq_update_write_ptr(priv, txq);
+
+ spin_unlock_irqrestore(&priv->hcmd_lock, flags);
+ return ret ? ret : idx;
+}
+
projects / deliverable / linux.git / blobdiff