#define MESSAGE_HEADER_LEN 4
-static char *lbs_fw_name = NULL;
-module_param_named(fw_name, lbs_fw_name, charp, 0644);
-
MODULE_FIRMWARE("libertas/usb8388_v9.bin");
MODULE_FIRMWARE("libertas/usb8388_v5.bin");
MODULE_FIRMWARE("libertas/usb8388.bin");
MODEL_8682 = 0x2
};
+/* table of firmware file names */
+static const struct lbs_fw_table fw_table[] = {
+ { MODEL_8388, "libertas/usb8388_olpc.bin", NULL },
+ { MODEL_8388, "libertas/usb8388_v9.bin", NULL },
+ { MODEL_8388, "libertas/usb8388_v5.bin", NULL },
+ { MODEL_8388, "libertas/usb8388.bin", NULL },
+ { MODEL_8388, "usb8388.bin", NULL },
+ { MODEL_8682, "libertas/usb8682.bin", NULL }
+};
+
static struct usb_device_id if_usb_table[] = {
/* Enter the device signature inside */
{ USB_DEVICE(0x1286, 0x2001), .driver_info = MODEL_8388 },
static void if_usb_receive(struct urb *urb);
static void if_usb_receive_fwload(struct urb *urb);
-static int __if_usb_prog_firmware(struct if_usb_card *cardp,
- const char *fwname, int cmd);
-static int if_usb_prog_firmware(struct if_usb_card *cardp,
- const char *fwname, int cmd);
+static void if_usb_prog_firmware(struct lbs_private *priv, int ret,
+ const struct firmware *fw,
+ const struct firmware *unused);
static int if_usb_host_to_card(struct lbs_private *priv, uint8_t type,
uint8_t *payload, uint16_t nb);
static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload,
static int if_usb_submit_rx_urb(struct if_usb_card *cardp);
static int if_usb_reset_device(struct if_usb_card *cardp);
-/* sysfs hooks */
-
-/*
- * Set function to write firmware to device's persistent memory
- */
-static ssize_t if_usb_firmware_set(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- struct lbs_private *priv = to_net_dev(dev)->ml_priv;
- struct if_usb_card *cardp = priv->card;
- int ret;
-
- BUG_ON(buf == NULL);
-
- ret = if_usb_prog_firmware(cardp, buf, BOOT_CMD_UPDATE_FW);
- if (ret == 0)
- return count;
-
- return ret;
-}
-
-/*
- * lbs_flash_fw attribute to be exported per ethX interface through sysfs
- * (/sys/class/net/ethX/lbs_flash_fw). Use this like so to write firmware to
- * the device's persistent memory:
- * echo usb8388-5.126.0.p5.bin > /sys/class/net/ethX/lbs_flash_fw
- */
-static DEVICE_ATTR(lbs_flash_fw, 0200, NULL, if_usb_firmware_set);
-
-/**
- * if_usb_boot2_set - write firmware to device's persistent memory
- *
- * @dev: target device
- * @attr: device attributes
- * @buf: firmware buffer to write
- * @count: number of bytes to write
- *
- * returns: number of bytes written or negative error code
- */
-static ssize_t if_usb_boot2_set(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- struct lbs_private *priv = to_net_dev(dev)->ml_priv;
- struct if_usb_card *cardp = priv->card;
- int ret;
-
- BUG_ON(buf == NULL);
-
- ret = if_usb_prog_firmware(cardp, buf, BOOT_CMD_UPDATE_BOOT2);
- if (ret == 0)
- return count;
-
- return ret;
-}
-
-/*
- * lbs_flash_boot2 attribute to be exported per ethX interface through sysfs
- * (/sys/class/net/ethX/lbs_flash_boot2). Use this like so to write firmware
- * to the device's persistent memory:
- * echo usb8388-5.126.0.p5.bin > /sys/class/net/ethX/lbs_flash_boot2
- */
-static DEVICE_ATTR(lbs_flash_boot2, 0200, NULL, if_usb_boot2_set);
-
/**
* if_usb_write_bulk_callback - callback function to handle the status
* of the URB
struct usb_endpoint_descriptor *endpoint;
struct lbs_private *priv;
struct if_usb_card *cardp;
+ int r = -ENOMEM;
int i;
udev = interface_to_usbdev(intf);
goto dealloc;
}
- /* Upload firmware */
- kparam_block_sysfs_write(fw_name);
- if (__if_usb_prog_firmware(cardp, lbs_fw_name, BOOT_CMD_FW_BY_USB)) {
- kparam_unblock_sysfs_write(fw_name);
- lbs_deb_usbd(&udev->dev, "FW upload failed\n");
- goto err_prog_firmware;
- }
- kparam_unblock_sysfs_write(fw_name);
-
if (!(priv = lbs_add_card(cardp, &intf->dev)))
- goto err_prog_firmware;
+ goto err_add_card;
cardp->priv = priv;
- cardp->priv->fw_ready = 1;
priv->hw_host_to_card = if_usb_host_to_card;
priv->enter_deep_sleep = NULL;
cardp->boot2_version = udev->descriptor.bcdDevice;
- if_usb_submit_rx_urb(cardp);
-
- if (lbs_start_card(priv))
- goto err_start_card;
-
- if_usb_setup_firmware(priv);
-
usb_get_dev(udev);
usb_set_intfdata(intf, cardp);
- if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_fw))
- netdev_err(priv->dev,
- "cannot register lbs_flash_fw attribute\n");
-
- if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2))
- netdev_err(priv->dev,
- "cannot register lbs_flash_boot2 attribute\n");
-
- /*
- * EHS_REMOVE_WAKEUP is not supported on all versions of the firmware.
- */
- priv->wol_criteria = EHS_REMOVE_WAKEUP;
- if (lbs_host_sleep_cfg(priv, priv->wol_criteria, NULL))
- priv->ehs_remove_supported = false;
+ r = lbs_get_firmware_async(priv, &udev->dev, cardp->model,
+ fw_table, if_usb_prog_firmware);
+ if (r)
+ goto err_get_fw;
return 0;
-err_start_card:
+err_get_fw:
lbs_remove_card(priv);
-err_prog_firmware:
+err_add_card:
if_usb_reset_device(cardp);
dealloc:
if_usb_free(cardp);
error:
- return -ENOMEM;
+ return r;
}
/**
static void if_usb_disconnect(struct usb_interface *intf)
{
struct if_usb_card *cardp = usb_get_intfdata(intf);
- struct lbs_private *priv = (struct lbs_private *) cardp->priv;
+ struct lbs_private *priv = cardp->priv;
lbs_deb_enter(LBS_DEB_MAIN);
- device_remove_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2);
- device_remove_file(&priv->dev->dev, &dev_attr_lbs_flash_fw);
-
cardp->surprise_removed = 1;
if (priv) {
return ret;
}
-
-/**
-* if_usb_prog_firmware - programs the firmware subject to cmd
-*
-* @cardp: the if_usb_card descriptor
-* @fwname: firmware or boot2 image file name
-* @cmd: either BOOT_CMD_FW_BY_USB, BOOT_CMD_UPDATE_FW,
-* or BOOT_CMD_UPDATE_BOOT2.
-* returns: 0 or error code
-*/
-static int if_usb_prog_firmware(struct if_usb_card *cardp,
- const char *fwname, int cmd)
-{
- struct lbs_private *priv = cardp->priv;
- unsigned long flags, caps;
- int ret;
-
- caps = priv->fwcapinfo;
- if (((cmd == BOOT_CMD_UPDATE_FW) && !(caps & FW_CAPINFO_FIRMWARE_UPGRADE)) ||
- ((cmd == BOOT_CMD_UPDATE_BOOT2) && !(caps & FW_CAPINFO_BOOT2_UPGRADE)))
- return -EOPNOTSUPP;
-
- /* Ensure main thread is idle. */
- spin_lock_irqsave(&priv->driver_lock, flags);
- while (priv->cur_cmd != NULL || priv->dnld_sent != DNLD_RES_RECEIVED) {
- spin_unlock_irqrestore(&priv->driver_lock, flags);
- if (wait_event_interruptible(priv->waitq,
- (priv->cur_cmd == NULL &&
- priv->dnld_sent == DNLD_RES_RECEIVED))) {
- return -ERESTARTSYS;
- }
- spin_lock_irqsave(&priv->driver_lock, flags);
- }
- priv->dnld_sent = DNLD_BOOTCMD_SENT;
- spin_unlock_irqrestore(&priv->driver_lock, flags);
-
- ret = __if_usb_prog_firmware(cardp, fwname, cmd);
-
- spin_lock_irqsave(&priv->driver_lock, flags);
- priv->dnld_sent = DNLD_RES_RECEIVED;
- spin_unlock_irqrestore(&priv->driver_lock, flags);
-
- wake_up(&priv->waitq);
-
- return ret;
-}
-
-/* table of firmware file names */
-static const struct {
- u32 model;
- const char *fwname;
-} fw_table[] = {
- { MODEL_8388, "libertas/usb8388_v9.bin" },
- { MODEL_8388, "libertas/usb8388_v5.bin" },
- { MODEL_8388, "libertas/usb8388.bin" },
- { MODEL_8388, "usb8388.bin" },
- { MODEL_8682, "libertas/usb8682.bin" }
-};
-
-#ifdef CONFIG_OLPC
-
-static int try_olpc_fw(struct if_usb_card *cardp)
-{
- int retval = -ENOENT;
-
- /* try the OLPC firmware first; fall back to fw_table list */
- if (machine_is_olpc() && cardp->model == MODEL_8388)
- retval = request_firmware(&cardp->fw,
- "libertas/usb8388_olpc.bin", &cardp->udev->dev);
- return retval;
-}
-
-#else
-static int try_olpc_fw(struct if_usb_card *cardp) { return -ENOENT; }
-#endif /* !CONFIG_OLPC */
-
-static int get_fw(struct if_usb_card *cardp, const char *fwname)
-{
- int i;
-
- /* Try user-specified firmware first */
- if (fwname)
- return request_firmware(&cardp->fw, fwname, &cardp->udev->dev);
-
- /* Handle OLPC firmware */
- if (try_olpc_fw(cardp) == 0)
- return 0;
-
- /* Otherwise search for firmware to use */
- for (i = 0; i < ARRAY_SIZE(fw_table); i++) {
- if (fw_table[i].model != cardp->model)
- continue;
- if (request_firmware(&cardp->fw, fw_table[i].fwname,
- &cardp->udev->dev) == 0)
- return 0;
- }
-
- return -ENOENT;
-}
-
-static int __if_usb_prog_firmware(struct if_usb_card *cardp,
- const char *fwname, int cmd)
+static void if_usb_prog_firmware(struct lbs_private *priv, int ret,
+ const struct firmware *fw,
+ const struct firmware *unused)
{
+ struct if_usb_card *cardp = priv->card;
int i = 0;
static int reset_count = 10;
- int ret = 0;
lbs_deb_enter(LBS_DEB_USB);
- ret = get_fw(cardp, fwname);
if (ret) {
pr_err("failed to find firmware (%d)\n", ret);
goto done;
}
+ cardp->fw = fw;
if (check_fwfile_format(cardp->fw->data, cardp->fw->size)) {
ret = -EINVAL;
goto release_fw;
do {
int j = 0;
i++;
- if_usb_issue_boot_command(cardp, cmd);
+ if_usb_issue_boot_command(cardp, BOOT_CMD_FW_BY_USB);
/* wait for command response */
do {
j++;
goto release_fw;
}
+ cardp->priv->fw_ready = 1;
+ if_usb_submit_rx_urb(cardp);
+
+ if (lbs_start_card(priv))
+ goto release_fw;
+
+ if_usb_setup_firmware(priv);
+
+ /*
+ * EHS_REMOVE_WAKEUP is not supported on all versions of the firmware.
+ */
+ priv->wol_criteria = EHS_REMOVE_WAKEUP;
+ if (lbs_host_sleep_cfg(priv, priv->wol_criteria, NULL))
+ priv->ehs_remove_supported = false;
+
release_fw:
release_firmware(cardp->fw);
cardp->fw = NULL;
done:
- lbs_deb_leave_args(LBS_DEB_USB, "ret %d", ret);
- return ret;
+ lbs_deb_leave(LBS_DEB_USB);
}
lbs_deb_enter(LBS_DEB_USB);
- if (priv->psstate != PS_STATE_FULL_POWER)
- return -1;
+ if (priv->psstate != PS_STATE_FULL_POWER) {
+ ret = -1;
+ goto out;
+ }
#ifdef CONFIG_OLPC
if (machine_is_olpc()) {
.suspend = if_usb_suspend,
.resume = if_usb_resume,
.reset_resume = if_usb_resume,
+ .disable_hub_initiated_lpm = 1,
};
module_usb_driver(if_usb_driver);
projects / deliverable / linux.git / blobdiff