cfg80211: remove 80+80 MHz rate reporting

[deliverable/linux.git] / drivers / net / wireless / mwifiex / cfg80211.c

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 4a66a655536647ed0a72d5a1e41bcccc15fae15c..71312ff527034a6e51a3e8dccaaf8559af17cde2 100644 (file)
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -910,10 +910,10 @@ mwifiex_dump_station_info(struct mwifiex_private *priv,
 {
        u32 rate;
 
-       sinfo->filled = STATION_INFO_RX_BYTES | STATION_INFO_TX_BYTES |
-                       STATION_INFO_RX_PACKETS | STATION_INFO_TX_PACKETS |
-                       STATION_INFO_TX_BITRATE |
-                       STATION_INFO_SIGNAL | STATION_INFO_SIGNAL_AVG;
+       sinfo->filled = BIT(NL80211_STA_INFO_RX_BYTES) | BIT(NL80211_STA_INFO_TX_BYTES) |
+                       BIT(NL80211_STA_INFO_RX_PACKETS) | BIT(NL80211_STA_INFO_TX_PACKETS) |
+                       BIT(NL80211_STA_INFO_TX_BITRATE) |
+                       BIT(NL80211_STA_INFO_SIGNAL) | BIT(NL80211_STA_INFO_SIGNAL_AVG);
 
        /* Get signal information from the firmware */
        if (mwifiex_send_cmd(priv, HostCmd_CMD_RSSI_INFO,
@@ -944,7 +944,7 @@ mwifiex_dump_station_info(struct mwifiex_private *priv,
        sinfo->txrate.legacy = rate * 5;
 
        if (priv->bss_mode == NL80211_IFTYPE_STATION) {
-               sinfo->filled |= STATION_INFO_BSS_PARAM;
+               sinfo->filled |= BIT(NL80211_STA_INFO_BSS_PARAM);
                sinfo->bss_param.flags = 0;
                if (priv->curr_bss_params.bss_descriptor.cap_info_bitmap &
                                                WLAN_CAPABILITY_SHORT_PREAMBLE)
@@ -1037,10 +1037,11 @@ mwifiex_cfg80211_dump_survey(struct wiphy *wiphy, struct net_device *dev,
        survey->channel = ieee80211_get_channel(wiphy,
            ieee80211_channel_to_frequency(pchan_stats[idx].chan_num, band));
        survey->filled = SURVEY_INFO_NOISE_DBM |
-               SURVEY_INFO_CHANNEL_TIME | SURVEY_INFO_CHANNEL_TIME_BUSY;
+                        SURVEY_INFO_TIME |
+                        SURVEY_INFO_TIME_BUSY;
        survey->noise = pchan_stats[idx].noise;
-       survey->channel_time = pchan_stats[idx].cca_scan_dur;
-       survey->channel_time_busy = pchan_stats[idx].cca_busy_dur;
+       survey->time = pchan_stats[idx].cca_scan_dur;
+       survey->time_busy = pchan_stats[idx].cca_busy_dur;
 
        return 0;
 }