struct cfg80211_ap_settings *params) {
int i;
+ if (!params->privacy) {
+ bss_config->protocol = PROTOCOL_NO_SECURITY;
+ bss_config->key_mgmt = KEY_MGMT_NONE;
+ bss_config->wpa_cfg.length = 0;
+ priv->sec_info.wep_enabled = 0;
+ priv->sec_info.wpa_enabled = 0;
+ priv->sec_info.wpa2_enabled = 0;
+
+ return 0;
+ }
+
switch (params->auth_type) {
case NL80211_AUTHTYPE_OPEN_SYSTEM:
bss_config->auth_mode = WLAN_AUTH_OPEN;
return 0;
}
+/* This function updates 11n related parameters from IE and sets them into
+ * bss_config structure.
+ */
+void
+mwifiex_set_ht_params(struct mwifiex_private *priv,
+ struct mwifiex_uap_bss_param *bss_cfg,
+ struct cfg80211_ap_settings *params)
+{
+ const u8 *ht_ie;
+
+ if (!ISSUPP_11NENABLED(priv->adapter->fw_cap_info))
+ return;
+
+ ht_ie = cfg80211_find_ie(WLAN_EID_HT_CAPABILITY, params->beacon.tail,
+ params->beacon.tail_len);
+ if (ht_ie) {
+ memcpy(&bss_cfg->ht_cap, ht_ie + 2,
+ sizeof(struct ieee80211_ht_cap));
+ } else {
+ memset(&bss_cfg->ht_cap , 0, sizeof(struct ieee80211_ht_cap));
+ bss_cfg->ht_cap.cap_info = cpu_to_le16(MWIFIEX_DEF_HT_CAP);
+ bss_cfg->ht_cap.ampdu_params_info = MWIFIEX_DEF_AMPDU;
+ }
+
+ return;
+}
+
/* This function initializes some of mwifiex_uap_bss_param variables.
* This helps FW in ignoring invalid values. These values may or may not
* be get updated to valid ones at later stage.
struct host_cmd_tlv_dtim_period *dtim_period;
struct host_cmd_tlv_beacon_period *beacon_period;
struct host_cmd_tlv_ssid *ssid;
+ struct host_cmd_tlv_bcast_ssid *bcast_ssid;
struct host_cmd_tlv_channel_band *chan_band;
struct host_cmd_tlv_frag_threshold *frag_threshold;
struct host_cmd_tlv_rts_threshold *rts_threshold;
struct host_cmd_tlv_auth_type *auth_type;
struct host_cmd_tlv_passphrase *passphrase;
struct host_cmd_tlv_akmp *tlv_akmp;
+ struct mwifiex_ie_types_htcap *htcap;
struct mwifiex_uap_bss_param *bss_cfg = cmd_buf;
u16 cmd_size = *param_size;
cmd_size += sizeof(struct host_cmd_tlv) +
bss_cfg->ssid.ssid_len;
tlv += sizeof(struct host_cmd_tlv) + bss_cfg->ssid.ssid_len;
+
+ bcast_ssid = (struct host_cmd_tlv_bcast_ssid *)tlv;
+ bcast_ssid->tlv.type = cpu_to_le16(TLV_TYPE_UAP_BCAST_SSID);
+ bcast_ssid->tlv.len =
+ cpu_to_le16(sizeof(bcast_ssid->bcast_ctl));
+ bcast_ssid->bcast_ctl = bss_cfg->bcast_ssid_ctl;
+ cmd_size += sizeof(struct host_cmd_tlv_bcast_ssid);
+ tlv += sizeof(struct host_cmd_tlv_bcast_ssid);
}
if (bss_cfg->channel && bss_cfg->channel <= MAX_CHANNEL_BAND_BG) {
chan_band = (struct host_cmd_tlv_channel_band *)tlv;
tlv += sizeof(struct host_cmd_tlv_encrypt_protocol);
}
+ if (bss_cfg->ht_cap.cap_info) {
+ htcap = (struct mwifiex_ie_types_htcap *)tlv;
+ htcap->header.type = cpu_to_le16(WLAN_EID_HT_CAPABILITY);
+ htcap->header.len =
+ cpu_to_le16(sizeof(struct ieee80211_ht_cap));
+ htcap->ht_cap.cap_info = bss_cfg->ht_cap.cap_info;
+ htcap->ht_cap.ampdu_params_info =
+ bss_cfg->ht_cap.ampdu_params_info;
+ memcpy(&htcap->ht_cap.mcs, &bss_cfg->ht_cap.mcs,
+ sizeof(struct ieee80211_mcs_info));
+ htcap->ht_cap.extended_ht_cap_info =
+ bss_cfg->ht_cap.extended_ht_cap_info;
+ htcap->ht_cap.tx_BF_cap_info = bss_cfg->ht_cap.tx_BF_cap_info;
+ htcap->ht_cap.antenna_selection_info =
+ bss_cfg->ht_cap.antenna_selection_info;
+ cmd_size += sizeof(struct mwifiex_ie_types_htcap);
+ tlv += sizeof(struct mwifiex_ie_types_htcap);
+ }
+
*param_size = cmd_size;
return 0;
return 0;
}
-
-/* This function sets the RF channel for AP.
- *
- * This function populates channel information in AP config structure
- * and sends command to configure channel information in AP.
- */
-int mwifiex_uap_set_channel(struct mwifiex_private *priv, int channel)
-{
- struct mwifiex_uap_bss_param *bss_cfg;
- struct wiphy *wiphy = priv->wdev->wiphy;
-
- bss_cfg = kzalloc(sizeof(struct mwifiex_uap_bss_param), GFP_KERNEL);
- if (!bss_cfg)
- return -ENOMEM;
-
- bss_cfg->band_cfg = BAND_CONFIG_MANUAL;
- bss_cfg->channel = channel;
-
- if (mwifiex_send_cmd_async(priv, HostCmd_CMD_UAP_SYS_CONFIG,
- HostCmd_ACT_GEN_SET,
- UAP_BSS_PARAMS_I, bss_cfg)) {
- wiphy_err(wiphy, "Failed to set the uAP channel\n");
- kfree(bss_cfg);
- return -1;
- }
-
- kfree(bss_cfg);
- return 0;
-}