[PATCH] pcmcia: new suspend core

[deliverable/linux.git] / drivers / net / wireless / wavelan_cs.c

diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index c822cad3333f3bba7cff1cd3608cfa8455430132..3e3532830c26493d0be142c693d744236e4a2ef1 100644 (file)
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -4775,6 +4775,56 @@ wavelan_detach(dev_link_t *      link)
 #endif
 }
 
+static int wavelan_suspend(struct pcmcia_device *p_dev)
+{
+       dev_link_t *link = dev_to_instance(p_dev);
+       struct net_device *     dev = (struct net_device *) link->priv;
+
+       /* NB: wavelan_close will be called, but too late, so we are
+        * obliged to close nicely the wavelan here. David, could you
+        * close the device before suspending them ? And, by the way,
+        * could you, on resume, add a "route add -net ..." after the
+        * ifconfig up ? Thanks... */
+
+       /* Stop receiving new messages and wait end of transmission */
+       wv_ru_stop(dev);
+
+       /* Power down the module */
+       hacr_write(dev->base_addr, HACR_DEFAULT & (~HACR_PWR_STAT));
+
+       /* The card is now suspended */
+       link->state |= DEV_SUSPEND;
+
+       if(link->state & DEV_CONFIG)
+       {
+               if(link->open)
+                       netif_device_detach(dev);
+               pcmcia_release_configuration(link->handle);
+       }
+
+       return 0;
+}
+
+static int wavelan_resume(struct pcmcia_device *p_dev)
+{
+       dev_link_t *link = dev_to_instance(p_dev);
+       struct net_device *     dev = (struct net_device *) link->priv;
+
+       link->state &= ~DEV_SUSPEND;
+       if(link->state & DEV_CONFIG)
+       {
+               pcmcia_request_configuration(link->handle, &link->conf);
+               if(link->open)  /* If RESET -> True, If RESUME -> False ? */
+               {
+                       wv_hw_reset(dev);
+                       netif_device_attach(dev);
+               }
+       }
+
+       return 0;
+}
+
+
 /*------------------------------------------------------------------*/
 /*
  * The card status event handler. Mostly, this schedules other stuff
@@ -4832,46 +4882,6 @@ wavelan_event(event_t            event,          /* The event received */
        else
          dev->irq = 0;
        break;
-
-      case CS_EVENT_PM_SUSPEND:
-       /* NB: wavelan_close will be called, but too late, so we are
-        * obliged to close nicely the wavelan here. David, could you
-        * close the device before suspending them ? And, by the way,
-        * could you, on resume, add a "route add -net ..." after the
-        * ifconfig up ? Thanks... */
-
-       /* Stop receiving new messages and wait end of transmission */
-       wv_ru_stop(dev);
-
-       /* Power down the module */
-       hacr_write(dev->base_addr, HACR_DEFAULT & (~HACR_PWR_STAT));
-
-       /* The card is now suspended */
-       link->state |= DEV_SUSPEND;
-       /* Fall through... */
-      case CS_EVENT_RESET_PHYSICAL:
-       if(link->state & DEV_CONFIG)
-         {
-           if(link->open)
-             netif_device_detach(dev);
-           pcmcia_release_configuration(link->handle);
-         }
-       break;
-
-      case CS_EVENT_PM_RESUME:
-       link->state &= ~DEV_SUSPEND;
-       /* Fall through... */
-      case CS_EVENT_CARD_RESET:
-       if(link->state & DEV_CONFIG)
-         {
-           pcmcia_request_configuration(link->handle, &link->conf);
-           if(link->open)      /* If RESET -> True, If RESUME -> False ? */
-             {
-               wv_hw_reset(dev);
-               netif_device_attach(dev);
-             }
-         }
-       break;
     }
 
 #ifdef DEBUG_CALLBACK_TRACE
@@ -4898,6 +4908,8 @@ static struct pcmcia_driver wavelan_driver = {
        .event          = wavelan_event,
        .detach         = wavelan_detach,
        .id_table       = wavelan_ids,
+       .suspend        = wavelan_suspend,
+       .resume         = wavelan_resume,
 };
 
 static int __init