[SCSI] qla2xxx: Fallback to 'golden-firmware' operation on supported ISPs.

[deliverable/linux.git] / drivers / scsi / qla2xxx / qla_fw.h

diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index ffff4255408784ffe24c1a2753a9654950e5ca6d..9e56d4a4cb7525d8812b46e2fe32080c1a0d4457 100644 (file)
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -1241,6 +1241,7 @@ struct qla_flt_header {
 #define FLT_REG_HW_EVENT_1     0x1f
 #define FLT_REG_NPIV_CONF_0    0x29
 #define FLT_REG_NPIV_CONF_1    0x2a
+#define FLT_REG_GOLD_FW                0x2f
 
 struct qla_flt_region {
        uint32_t code;
@@ -1403,6 +1404,23 @@ struct access_chip_rsp_84xx {
 #define MBA_IDC_TIME_EXT       0x8102
 
 #define MBC_IDC_ACK            0x101
+#define MBC_RESTART_MPI_FW     0x3d
+#define MBC_FLASH_ACCESS_CTRL  0x3e    /* Control flash access. */
+#define MBC_GET_XGMAC_STATS    0x7a
+#define MBC_GET_DCBX_PARAMS    0x51
+
+/* Flash access control option field bit definitions */
+#define FAC_OPT_FORCE_SEMAPHORE                BIT_15
+#define FAC_OPT_REQUESTOR_ID           BIT_14
+#define FAC_OPT_CMD_SUBCODE            0xff
+
+/* Flash access control command subcodes */
+#define FAC_OPT_CMD_WRITE_PROTECT      0x00
+#define FAC_OPT_CMD_WRITE_ENABLE       0x01
+#define FAC_OPT_CMD_ERASE_SECTOR       0x02
+#define FAC_OPT_CMD_LOCK_SEMAPHORE     0x03
+#define FAC_OPT_CMD_UNLOCK_SEMAPHORE   0x04
+#define FAC_OPT_CMD_GET_SECTOR_SIZE    0x05
 
 struct nvram_81xx {
        /* NVRAM header. */
@@ -1440,7 +1458,17 @@ struct nvram_81xx {
        uint16_t reserved_6[24];
 
        /* Offset 128. */
-       uint16_t reserved_7[64];
+       uint16_t ex_version;
+       uint8_t prio_fcf_matching_flags;
+       uint8_t reserved_6_1[3];
+       uint16_t pri_fcf_vlan_id;
+       uint8_t pri_fcf_fabric_name[8];
+       uint16_t reserved_6_2[7];
+       uint8_t spma_mac_addr[6];
+       uint16_t reserved_6_3[14];
+
+       /* Offset 192. */
+       uint16_t reserved_7[32];
 
        /*
         * BIT 0  = Enable spinup delay
@@ -1664,6 +1692,17 @@ struct mid_init_cb_81xx {
        struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC];
 };
 
+struct ex_init_cb_81xx {
+       uint16_t ex_version;
+       uint8_t prio_fcf_matching_flags;
+       uint8_t reserved_1[3];
+       uint16_t pri_fcf_vlan_id;
+       uint8_t pri_fcf_fabric_name[8];
+       uint16_t reserved_2[7];
+       uint8_t spma_mac_addr[6];
+       uint16_t reserved_3[14];
+};
+
 #define FARX_ACCESS_FLASH_CONF_81XX    0x7FFD0000
 #define FARX_ACCESS_FLASH_DATA_81XX    0x7F800000
 
@@ -1672,6 +1711,10 @@ struct mid_init_cb_81xx {
 #define FA_RISC_CODE_ADDR_81   0xA0000
 #define FA_FW_AREA_ADDR_81     0xC0000
 #define FA_VPD_NVRAM_ADDR_81   0xD0000
+#define FA_VPD0_ADDR_81                0xD0000
+#define FA_VPD1_ADDR_81                0xD0400
+#define FA_NVRAM0_ADDR_81      0xD0080
+#define FA_NVRAM1_ADDR_81      0xD0180
 #define FA_FEATURE_ADDR_81     0xD4000
 #define FA_FLASH_DESCR_ADDR_81 0xD8000
 #define FA_FLASH_LAYOUT_ADDR_81        0xD8400