* CLOSED. I would rather refcount the import and free it after
* disconnection like we do with exports. To do that, the client_obd
* will need to save the peer info somewhere other than in the import,
- * though. */
+ * though.
+ */
int ptlrpc_init_import(struct obd_import *imp)
{
spin_lock(&imp->imp_lock);
return;
if (!strncmp(*uuid_start + *uuid_len - strlen(UUID_STR),
- UUID_STR, strlen(UUID_STR)))
+ UUID_STR, strlen(UUID_STR)))
*uuid_len -= strlen(UUID_STR);
}
/* Wait forever until inflight == 0. We really can't do it another
* way because in some cases we need to wait for very long reply
* unlink. We can't do anything before that because there is really
- * no guarantee that some rdma transfer is not in progress right now. */
+ * no guarantee that some rdma transfer is not in progress right now.
+ */
do {
/* Calculate max timeout for waiting on rpcs to error
* out. Use obd_timeout if calculated value is smaller
- * than it. */
+ * than it.
+ */
if (!OBD_FAIL_CHECK(OBD_FAIL_PTLRPC_LONG_REPL_UNLINK)) {
timeout = ptlrpc_inflight_timeout(imp);
timeout += timeout / 3;
/* Wait for all requests to error out and call completion
* callbacks. Cap it at obd_timeout -- these should all
- * have been locally cancelled by ptlrpc_abort_inflight. */
+ * have been locally cancelled by ptlrpc_abort_inflight.
+ */
lwi = LWI_TIMEOUT_INTERVAL(
cfs_timeout_cap(cfs_time_seconds(timeout)),
(timeout > 1)?cfs_time_seconds(1):cfs_time_seconds(1)/2,
* maybe waiting for long reply unlink in
* sluggish nets). Let's check this. If there
* is no inflight and unregistering != 0, this
- * is bug. */
+ * is bug.
+ */
LASSERTF(count == 0, "Some RPCs are still unregistering: %d\n",
count);
/* Let's save one loop as soon as inflight have
* dropped to zero. No new inflights possible at
- * this point. */
+ * this point.
+ */
rc = 0;
} else {
list_for_each_safe(tmp, n,
- &imp->imp_sending_list) {
+ &imp->imp_sending_list) {
req = list_entry(tmp,
- struct ptlrpc_request,
- rq_list);
+ struct ptlrpc_request,
+ rq_list);
DEBUG_REQ(D_ERROR, req,
"still on sending list");
}
list_for_each_safe(tmp, n,
- &imp->imp_delayed_list) {
+ &imp->imp_delayed_list) {
req = list_entry(tmp,
- struct ptlrpc_request,
- rq_list);
+ struct ptlrpc_request,
+ rq_list);
DEBUG_REQ(D_ERROR, req,
"still on delayed list");
}
int ptlrpc_reconnect_import(struct obd_import *imp)
{
-#ifdef ENABLE_PINGER
struct l_wait_info lwi;
int secs = cfs_time_seconds(obd_timeout);
int rc;
CDEBUG(D_HA, "%s: recovery finished s:%s\n", obd2cli_tgt(imp->imp_obd),
ptlrpc_import_state_name(imp->imp_state));
return rc;
-#else
- ptlrpc_set_import_discon(imp, 0);
- /* Force a new connect attempt */
- ptlrpc_invalidate_import(imp);
- /* Do a fresh connect next time by zeroing the handle */
- ptlrpc_disconnect_import(imp, 1);
- /* Wait for all invalidate calls to finish */
- if (atomic_read(&imp->imp_inval_count) > 0) {
- int rc;
- struct l_wait_info lwi = LWI_INTR(LWI_ON_SIGNAL_NOOP, NULL);
-
- rc = l_wait_event(imp->imp_recovery_waitq,
- (atomic_read(&imp->imp_inval_count) == 0),
- &lwi);
- if (rc)
- CERROR("Interrupted, inval=%d\n",
- atomic_read(&imp->imp_inval_count));
- }
-
- /* Allow reconnect attempts */
- imp->imp_obd->obd_no_recov = 0;
- /* Remove 'invalid' flag */
- ptlrpc_activate_import(imp);
- /* Attempt a new connect */
- ptlrpc_recover_import(imp, NULL, 0);
- return 0;
-#endif
}
EXPORT_SYMBOL(ptlrpc_reconnect_import);
conn->oic_last_attempt);
/* If we have not tried this connection since
- the last successful attempt, go with this one */
+ * the last successful attempt, go with this one
+ */
if ((conn->oic_last_attempt == 0) ||
cfs_time_beforeq_64(conn->oic_last_attempt,
- imp->imp_last_success_conn)) {
+ imp->imp_last_success_conn)) {
imp_conn = conn;
tried_all = 0;
break;
}
/* If all of the connections have already been tried
- since the last successful connection; just choose the
- least recently used */
+ * since the last successful connection; just choose the
+ * least recently used
+ */
if (!imp_conn)
imp_conn = conn;
else if (cfs_time_before_64(conn->oic_last_attempt,
LASSERT(imp_conn->oic_conn);
/* If we've tried everything, and we're back to the beginning of the
- list, increase our timeout and try again. It will be reset when
- we do finally connect. (FIXME: really we should wait for all network
- state associated with the last connection attempt to drain before
- trying to reconnect on it.) */
+ * list, increase our timeout and try again. It will be reset when
+ * we do finally connect. (FIXME: really we should wait for all network
+ * state associated with the last connection attempt to drain before
+ * trying to reconnect on it.)
+ */
if (tried_all && (imp->imp_conn_list.next == &imp_conn->oic_item)) {
struct adaptive_timeout *at = &imp->imp_at.iat_net_latency;
imp->imp_connection = ptlrpc_connection_addref(imp_conn->oic_conn);
dlmexp = class_conn2export(&imp->imp_dlm_handle);
- LASSERT(dlmexp != NULL);
ptlrpc_connection_put(dlmexp->exp_connection);
dlmexp->exp_connection = ptlrpc_connection_addref(imp_conn->oic_conn);
class_export_put(dlmexp);
struct list_head *tmp;
/* The requests in committed_list always have smaller transnos than
- * the requests in replay_list */
+ * the requests in replay_list
+ */
if (!list_empty(&imp->imp_committed_list)) {
tmp = imp->imp_committed_list.next;
req = list_entry(tmp, struct ptlrpc_request, rq_replay_list);
goto out;
/* Reset connect flags to the originally requested flags, in case
- * the server is updated on-the-fly we will get the new features. */
+ * the server is updated on-the-fly we will get the new features.
+ */
imp->imp_connect_data.ocd_connect_flags = imp->imp_connect_flags_orig;
/* Reset ocd_version each time so the server knows the exact versions */
imp->imp_connect_data.ocd_version = LUSTRE_VERSION_CODE;
goto out;
request = ptlrpc_request_alloc(imp, &RQF_MDS_CONNECT);
- if (request == NULL) {
+ if (!request) {
rc = -ENOMEM;
goto out;
}
}
/* Report the rpc service time to the server so that it knows how long
- * to wait for clients to join recovery */
+ * to wait for clients to join recovery
+ */
lustre_msg_set_service_time(request->rq_reqmsg,
at_timeout2est(request->rq_timeout));
* import_select_connection will increase the net latency on
* repeated reconnect attempts to cover slow networks.
* We override/ignore the server rpc completion estimate here,
- * which may be large if this is a reconnect attempt */
+ * which may be large if this is a reconnect attempt
+ */
request->rq_timeout = INITIAL_CONNECT_TIMEOUT;
lustre_msg_set_timeout(request->rq_reqmsg, request->rq_timeout);
if (rc) {
/* if this reconnect to busy export - not need select new target
- * for connecting*/
+ * for connecting
+ */
imp->imp_force_reconnect = ptlrpc_busy_reconnect(rc);
spin_unlock(&imp->imp_lock);
ptlrpc_maybe_ping_import_soon(imp);
ocd = req_capsule_server_sized_get(&request->rq_pill,
&RMF_CONNECT_DATA, ret);
- if (ocd == NULL) {
+ if (!ocd) {
CERROR("%s: no connect data from server\n",
imp->imp_obd->obd_name);
rc = -EPROTO;
if (!exp) {
/* This could happen if export is cleaned during the
- connect attempt */
+ * connect attempt
+ */
CERROR("%s: missing export after connect\n",
imp->imp_obd->obd_name);
rc = -ENODEV;
}
/* if applies, adjust the imp->imp_msg_magic here
- * according to reply flags */
+ * according to reply flags
+ */
imp->imp_remote_handle =
*lustre_msg_get_handle(request->rq_repmsg);
/* Initial connects are allowed for clients with non-random
* uuids when servers are in recovery. Simply signal the
- * servers replay is complete and wait in REPLAY_WAIT. */
+ * servers replay is complete and wait in REPLAY_WAIT.
+ */
if (msg_flags & MSG_CONNECT_RECOVERING) {
CDEBUG(D_HA, "connect to %s during recovery\n",
obd2cli_tgt(imp->imp_obd));
* already erased all of our state because of previous
* eviction. If it is in recovery - we are safe to
* participate since we can reestablish all of our state
- * with server again */
+ * with server again
+ */
if ((msg_flags & MSG_CONNECT_RECOVERING)) {
CDEBUG(level, "%s@%s changed server handle from %#llx to %#llx but is still in recovery\n",
obd2cli_tgt(imp->imp_obd),
spin_lock(&imp->imp_lock);
list_del(&imp->imp_conn_current->oic_item);
- list_add(&imp->imp_conn_current->oic_item,
- &imp->imp_conn_list);
+ list_add(&imp->imp_conn_current->oic_item, &imp->imp_conn_list);
imp->imp_last_success_conn =
imp->imp_conn_current->oic_last_attempt;
ocd->ocd_version < LUSTRE_VERSION_CODE -
LUSTRE_VERSION_OFFSET_WARN)) {
/* Sigh, some compilers do not like #ifdef in the middle
- of macro arguments */
+ * of macro arguments
+ */
const char *older = "older. Consider upgrading server or downgrading client"
;
const char *newer = "newer than client version. Consider upgrading client"
* fixup is version-limited, because we don't want to carry the
* OBD_CONNECT_MNE_SWAB flag around forever, just so long as we
* need interop with unpatched 2.2 servers. For newer servers,
- * the client will do MNE swabbing only as needed. LU-1644 */
+ * the client will do MNE swabbing only as needed. LU-1644
+ */
if (unlikely((ocd->ocd_connect_flags & OBD_CONNECT_VERSION) &&
!(ocd->ocd_connect_flags & OBD_CONNECT_MNE_SWAB) &&
OBD_OCD_VERSION_MAJOR(ocd->ocd_version) == 2 &&
if (ocd->ocd_connect_flags & OBD_CONNECT_CKSUM) {
/* We sent to the server ocd_cksum_types with bits set
* for algorithms we understand. The server masked off
- * the checksum types it doesn't support */
+ * the checksum types it doesn't support
+ */
if ((ocd->ocd_cksum_types &
cksum_types_supported_client()) == 0) {
LCONSOLE_WARN("The negotiation of the checksum algorithm to use with server %s failed (%x/%x), disabling checksums\n",
}
} else {
/* The server does not support OBD_CONNECT_CKSUM.
- * Enforce ADLER for backward compatibility*/
+ * Enforce ADLER for backward compatibility
+ */
cli->cl_supp_cksum_types = OBD_CKSUM_ADLER;
}
cli->cl_cksum_type = cksum_type_select(cli->cl_supp_cksum_types);
/* Reset ns_connect_flags only for initial connect. It might be
* changed in while using FS and if we reset it in reconnect
* this leads to losing user settings done before such as
- * disable lru_resize, etc. */
+ * disable lru_resize, etc.
+ */
if (old_connect_flags != exp_connect_flags(exp) ||
aa->pcaa_initial_connect) {
CDEBUG(D_HA, "%s: Resetting ns_connect_flags to server flags: %#llx\n",
if ((ocd->ocd_connect_flags & OBD_CONNECT_AT) &&
(imp->imp_msg_magic == LUSTRE_MSG_MAGIC_V2))
/* We need a per-message support flag, because
- a. we don't know if the incoming connect reply
- supports AT or not (in reply_in_callback)
- until we unpack it.
- b. failovered server means export and flags are gone
- (in ptlrpc_send_reply).
- Can only be set when we know AT is supported at
- both ends */
+ * a. we don't know if the incoming connect reply
+ * supports AT or not (in reply_in_callback)
+ * until we unpack it.
+ * b. failovered server means export and flags are gone
+ * (in ptlrpc_send_reply).
+ * Can only be set when we know AT is supported at
+ * both ends
+ */
imp->imp_msghdr_flags |= MSGHDR_AT_SUPPORT;
else
imp->imp_msghdr_flags &= ~MSGHDR_AT_SUPPORT;
struct obd_connect_data *ocd;
/* reply message might not be ready */
- if (request->rq_repmsg == NULL)
+ if (!request->rq_repmsg)
return -EPROTO;
ocd = req_capsule_server_get(&request->rq_pill,
req = ptlrpc_request_alloc_pack(imp, &RQF_OBD_PING, LUSTRE_OBD_VERSION,
OBD_PING);
- if (req == NULL) {
+ if (!req) {
atomic_dec(&imp->imp_replay_inflight);
return -ENOMEM;
}
{
struct task_struct *task;
/* bug 17802: XXX client_disconnect_export vs connect request
- * race. if client will evicted at this time, we start
+ * race. if client is evicted at this time, we start
* invalidate thread without reference to import and import can
- * be freed at same time. */
+ * be freed at same time.
+ */
class_import_get(imp);
task = kthread_run(ptlrpc_invalidate_import_thread, imp,
- "ll_imp_inval");
+ "ll_imp_inval");
if (IS_ERR(task)) {
class_import_put(imp);
CERROR("error starting invalidate thread: %d\n", rc);
if (req) {
/* We are disconnecting, do not retry a failed DISCONNECT rpc if
* it fails. We can get through the above with a down server
- * if the client doesn't know the server is gone yet. */
+ * if the client doesn't know the server is gone yet.
+ */
req->rq_no_resend = 1;
/* We want client umounts to happen quickly, no matter the
- server state... */
+ * server state...
+ */
req->rq_timeout = min_t(int, req->rq_timeout,
INITIAL_CONNECT_TIMEOUT);
extern unsigned int at_min, at_max, at_history;
/* Bin into timeslices using AT_BINS bins.
- This gives us a max of the last binlimit*AT_BINS secs without the storage,
- but still smoothing out a return to normalcy from a slow response.
- (E.g. remember the maximum latency in each minute of the last 4 minutes.) */
+ * This gives us a max of the last binlimit*AT_BINS secs without the storage,
+ * but still smoothing out a return to normalcy from a slow response.
+ * (E.g. remember the maximum latency in each minute of the last 4 minutes.)
+ */
int at_measured(struct adaptive_timeout *at, unsigned int val)
{
unsigned int old = at->at_current;
if (val == 0)
/* 0's don't count, because we never want our timeout to
- drop to 0, and because 0 could mean an error */
+ * drop to 0, and because 0 could mean an error
+ */
return 0;
spin_lock(&at->at_lock);
if (at->at_flags & AT_FLG_NOHIST)
/* Only keep last reported val; keeping the rest of the history
- for proc only */
+ * for debugfs only
+ */
at->at_current = val;
if (at_max > 0)
projects / deliverable / linux.git / blobdiff