#define LCD_ESCAPE_LEN 24 /* max chars for LCD escape command */
#define LCD_ESCAPE_CHAR 27 /* use char 27 for escape command */
+#define NOT_SET -1
+
/* macros to simplify use of the parallel port */
#define r_ctr(x) (parport_read_control((x)->port))
#define r_dtr(x) (parport_read_data((x)->port))
static char inputs_stable;
/* these variables are specific to the keypad */
+static struct {
+ bool enabled;
+} keypad;
+
static char keypad_buffer[KEYPAD_BUFFER];
static int keypad_buflen;
static int keypad_start;
static wait_queue_head_t keypad_read_wait;
/* lcd-specific variables */
-
-/* contains the LCD config state */
-static unsigned long int lcd_flags;
-/* contains the LCD X offset */
-static unsigned long int lcd_addr_x;
-/* contains the LCD Y offset */
-static unsigned long int lcd_addr_y;
-/* current escape sequence, 0 terminated */
-static char lcd_escape[LCD_ESCAPE_LEN + 1];
-/* not in escape state. >=0 = escape cmd len */
-static int lcd_escape_len = -1;
+static struct {
+ bool enabled;
+ bool initialized;
+ bool must_clear;
+
+ int height;
+ int width;
+ int bwidth;
+ int hwidth;
+ int charset;
+ int proto;
+ int light_tempo;
+
+ /* TODO: use union here? */
+ struct {
+ int e;
+ int rs;
+ int rw;
+ int cl;
+ int da;
+ int bl;
+ } pins;
+
+ /* contains the LCD config state */
+ unsigned long int flags;
+
+ /* Contains the LCD X and Y offset */
+ struct {
+ unsigned long int x;
+ unsigned long int y;
+ } addr;
+
+ /* Current escape sequence and it's length or -1 if outside */
+ struct {
+ char buf[LCD_ESCAPE_LEN + 1];
+ int len;
+ } esc_seq;
+} lcd;
+
+/* Needed only for init */
+static int selected_lcd_type = NOT_SET;
/*
* Bit masks to convert LCD signals to parallel port outputs.
/*
* Construct custom config from the kernel's configuration
*/
-#define DEFAULT_PROFILE PANEL_PROFILE_LARGE
#define DEFAULT_PARPORT 0
-#define DEFAULT_LCD LCD_TYPE_OLD
-#define DEFAULT_KEYPAD KEYPAD_TYPE_OLD
+#define DEFAULT_PROFILE PANEL_PROFILE_LARGE
+#define DEFAULT_KEYPAD_TYPE KEYPAD_TYPE_OLD
+#define DEFAULT_LCD_TYPE LCD_TYPE_OLD
+#define DEFAULT_LCD_HEIGHT 2
#define DEFAULT_LCD_WIDTH 40
#define DEFAULT_LCD_BWIDTH 40
#define DEFAULT_LCD_HWIDTH 64
-#define DEFAULT_LCD_HEIGHT 2
+#define DEFAULT_LCD_CHARSET LCD_CHARSET_NORMAL
#define DEFAULT_LCD_PROTO LCD_PROTO_PARALLEL
#define DEFAULT_LCD_PIN_E PIN_AUTOLF
#define DEFAULT_LCD_PIN_SCL PIN_STROBE
#define DEFAULT_LCD_PIN_SDA PIN_D0
#define DEFAULT_LCD_PIN_BL PIN_NOT_SET
-#define DEFAULT_LCD_CHARSET LCD_CHARSET_NORMAL
-
-#ifdef CONFIG_PANEL_PROFILE
-#undef DEFAULT_PROFILE
-#define DEFAULT_PROFILE CONFIG_PANEL_PROFILE
-#endif
#ifdef CONFIG_PANEL_PARPORT
#undef DEFAULT_PARPORT
#define DEFAULT_PARPORT CONFIG_PANEL_PARPORT
#endif
+#ifdef CONFIG_PANEL_PROFILE
+#undef DEFAULT_PROFILE
+#define DEFAULT_PROFILE CONFIG_PANEL_PROFILE
+#endif
+
#if DEFAULT_PROFILE == 0 /* custom */
#ifdef CONFIG_PANEL_KEYPAD
-#undef DEFAULT_KEYPAD
-#define DEFAULT_KEYPAD CONFIG_PANEL_KEYPAD
+#undef DEFAULT_KEYPAD_TYPE
+#define DEFAULT_KEYPAD_TYPE CONFIG_PANEL_KEYPAD
#endif
#ifdef CONFIG_PANEL_LCD
-#undef DEFAULT_LCD
-#define DEFAULT_LCD CONFIG_PANEL_LCD
+#undef DEFAULT_LCD_TYPE
+#define DEFAULT_LCD_TYPE CONFIG_PANEL_LCD
+#endif
+
+#ifdef CONFIG_PANEL_LCD_HEIGHT
+#undef DEFAULT_LCD_HEIGHT
+#define DEFAULT_LCD_HEIGHT CONFIG_PANEL_LCD_HEIGHT
#endif
#ifdef CONFIG_PANEL_LCD_WIDTH
#define DEFAULT_LCD_HWIDTH CONFIG_PANEL_LCD_HWIDTH
#endif
-#ifdef CONFIG_PANEL_LCD_HEIGHT
-#undef DEFAULT_LCD_HEIGHT
-#define DEFAULT_LCD_HEIGHT CONFIG_PANEL_LCD_HEIGHT
+#ifdef CONFIG_PANEL_LCD_CHARSET
+#undef DEFAULT_LCD_CHARSET
+#define DEFAULT_LCD_CHARSET CONFIG_PANEL_LCD_CHARSET
#endif
#ifdef CONFIG_PANEL_LCD_PROTO
#define DEFAULT_LCD_PIN_BL CONFIG_PANEL_LCD_PIN_BL
#endif
-#ifdef CONFIG_PANEL_LCD_CHARSET
-#undef DEFAULT_LCD_CHARSET
-#define DEFAULT_LCD_CHARSET CONFIG_PANEL_LCD_CHARSET
-#endif
-
#endif /* DEFAULT_PROFILE == 0 */
/* global variables */
-static int keypad_open_cnt; /* #times opened */
-static int lcd_open_cnt; /* #times opened */
+
+/* Device single-open policy control */
+static atomic_t lcd_available = ATOMIC_INIT(1);
+static atomic_t keypad_available = ATOMIC_INIT(1);
+
static struct pardevice *pprt;
-static int lcd_initialized;
static int keypad_initialized;
-static int light_tempo;
-
-static char lcd_must_clear;
-static char lcd_left_shift;
static char init_in_progress;
static void (*lcd_write_cmd)(int);
MODULE_DESCRIPTION("Generic parallel port LCD/Keypad driver");
-static int parport = -1;
+static int parport = DEFAULT_PARPORT;
module_param(parport, int, 0000);
MODULE_PARM_DESC(parport, "Parallel port index (0=lpt1, 1=lpt2, ...)");
-static int lcd_height = -1;
+static int profile = DEFAULT_PROFILE;
+module_param(profile, int, 0000);
+MODULE_PARM_DESC(profile,
+ "1=16x2 old kp; 2=serial 16x2, new kp; 3=16x2 hantronix; "
+ "4=16x2 nexcom; default=40x2, old kp");
+
+static int keypad_type = NOT_SET;
+module_param(keypad_type, int, 0000);
+MODULE_PARM_DESC(keypad_type,
+ "Keypad type: 0=none, 1=old 6 keys, 2=new 6+1 keys, 3=nexcom 4 keys");
+
+static int lcd_type = NOT_SET;
+module_param(lcd_type, int, 0000);
+MODULE_PARM_DESC(lcd_type,
+ "LCD type: 0=none, 1=old //, 2=serial ks0074, 3=hantronix //, 4=nexcom //, 5=compiled-in");
+
+static int lcd_height = NOT_SET;
module_param(lcd_height, int, 0000);
MODULE_PARM_DESC(lcd_height, "Number of lines on the LCD");
-static int lcd_width = -1;
+static int lcd_width = NOT_SET;
module_param(lcd_width, int, 0000);
MODULE_PARM_DESC(lcd_width, "Number of columns on the LCD");
-static int lcd_bwidth = -1; /* internal buffer width (usually 40) */
+static int lcd_bwidth = NOT_SET; /* internal buffer width (usually 40) */
module_param(lcd_bwidth, int, 0000);
MODULE_PARM_DESC(lcd_bwidth, "Internal LCD line width (40)");
-static int lcd_hwidth = -1; /* hardware buffer width (usually 64) */
+static int lcd_hwidth = NOT_SET; /* hardware buffer width (usually 64) */
module_param(lcd_hwidth, int, 0000);
MODULE_PARM_DESC(lcd_hwidth, "LCD line hardware address (64)");
-static int lcd_enabled = -1;
-module_param(lcd_enabled, int, 0000);
-MODULE_PARM_DESC(lcd_enabled, "Deprecated option, use lcd_type instead");
-
-static int keypad_enabled = -1;
-module_param(keypad_enabled, int, 0000);
-MODULE_PARM_DESC(keypad_enabled, "Deprecated option, use keypad_type instead");
-
-static int lcd_type = -1;
-module_param(lcd_type, int, 0000);
-MODULE_PARM_DESC(lcd_type,
- "LCD type: 0=none, 1=old //, 2=serial ks0074, 3=hantronix //, 4=nexcom //, 5=compiled-in");
+static int lcd_charset = NOT_SET;
+module_param(lcd_charset, int, 0000);
+MODULE_PARM_DESC(lcd_charset, "LCD character set: 0=standard, 1=KS0074");
-static int lcd_proto = -1;
+static int lcd_proto = NOT_SET;
module_param(lcd_proto, int, 0000);
MODULE_PARM_DESC(lcd_proto,
"LCD communication: 0=parallel (//), 1=serial, 2=TI LCD Interface");
-static int lcd_charset = -1;
-module_param(lcd_charset, int, 0000);
-MODULE_PARM_DESC(lcd_charset, "LCD character set: 0=standard, 1=KS0074");
-
-static int keypad_type = -1;
-module_param(keypad_type, int, 0000);
-MODULE_PARM_DESC(keypad_type,
- "Keypad type: 0=none, 1=old 6 keys, 2=new 6+1 keys, 3=nexcom 4 keys");
-
-static int profile = DEFAULT_PROFILE;
-module_param(profile, int, 0000);
-MODULE_PARM_DESC(profile,
- "1=16x2 old kp; 2=serial 16x2, new kp; 3=16x2 hantronix; "
- "4=16x2 nexcom; default=40x2, old kp");
-
/*
* These are the parallel port pins the LCD control signals are connected to.
* Set this to 0 if the signal is not used. Set it to its opposite value
MODULE_PARM_DESC(lcd_rw_pin,
"# of the // port pin connected to LCD 'RW' signal, with polarity (-17..17)");
-static int lcd_bl_pin = PIN_NOT_SET;
-module_param(lcd_bl_pin, int, 0000);
-MODULE_PARM_DESC(lcd_bl_pin,
- "# of the // port pin connected to LCD backlight, with polarity (-17..17)");
+static int lcd_cl_pin = PIN_NOT_SET;
+module_param(lcd_cl_pin, int, 0000);
+MODULE_PARM_DESC(lcd_cl_pin,
+ "# of the // port pin connected to serial LCD 'SCL' signal, with polarity (-17..17)");
static int lcd_da_pin = PIN_NOT_SET;
module_param(lcd_da_pin, int, 0000);
MODULE_PARM_DESC(lcd_da_pin,
"# of the // port pin connected to serial LCD 'SDA' signal, with polarity (-17..17)");
-static int lcd_cl_pin = PIN_NOT_SET;
-module_param(lcd_cl_pin, int, 0000);
-MODULE_PARM_DESC(lcd_cl_pin,
- "# of the // port pin connected to serial LCD 'SCL' signal, with polarity (-17..17)");
+static int lcd_bl_pin = PIN_NOT_SET;
+module_param(lcd_bl_pin, int, 0000);
+MODULE_PARM_DESC(lcd_bl_pin,
+ "# of the // port pin connected to LCD backlight, with polarity (-17..17)");
+
+/* Deprecated module parameters - consider not using them anymore */
+
+static int lcd_enabled = NOT_SET;
+module_param(lcd_enabled, int, 0000);
+MODULE_PARM_DESC(lcd_enabled, "Deprecated option, use lcd_type instead");
+
+static int keypad_enabled = NOT_SET;
+module_param(keypad_enabled, int, 0000);
+MODULE_PARM_DESC(keypad_enabled, "Deprecated option, use keypad_type instead");
+
static const unsigned char *lcd_char_conv;
/* turn the backlight on or off */
static void lcd_backlight(int on)
{
- if (lcd_bl_pin == PIN_NONE)
+ if (lcd.pins.bl == PIN_NONE)
return;
/* The backlight is activated by setting the AUTOFEED line to +5V */
static void lcd_gotoxy(void)
{
lcd_write_cmd(0x80 /* set DDRAM address */
- | (lcd_addr_y ? lcd_hwidth : 0)
+ | (lcd.addr.y ? lcd.hwidth : 0)
/* we force the cursor to stay at the end of the
line if it wants to go farther */
- | ((lcd_addr_x < lcd_bwidth) ? lcd_addr_x &
- (lcd_hwidth - 1) : lcd_bwidth - 1));
+ | ((lcd.addr.x < lcd.bwidth) ? lcd.addr.x &
+ (lcd.hwidth - 1) : lcd.bwidth - 1));
}
static void lcd_print(char c)
{
- if (lcd_addr_x < lcd_bwidth) {
+ if (lcd.addr.x < lcd.bwidth) {
if (lcd_char_conv != NULL)
c = lcd_char_conv[(unsigned char)c];
lcd_write_data(c);
- lcd_addr_x++;
+ lcd.addr.x++;
}
/* prevents the cursor from wrapping onto the next line */
- if (lcd_addr_x == lcd_bwidth)
+ if (lcd.addr.x == lcd.bwidth)
lcd_gotoxy();
}
{
int pos;
- lcd_addr_x = 0;
- lcd_addr_y = 0;
+ lcd.addr.x = 0;
+ lcd.addr.y = 0;
lcd_gotoxy();
spin_lock_irq(&pprt_lock);
- for (pos = 0; pos < lcd_height * lcd_hwidth; pos++) {
+ for (pos = 0; pos < lcd.height * lcd.hwidth; pos++) {
lcd_send_serial(0x5F); /* R/W=W, RS=1 */
lcd_send_serial(' ' & 0x0F);
lcd_send_serial((' ' >> 4) & 0x0F);
}
spin_unlock_irq(&pprt_lock);
- lcd_addr_x = 0;
- lcd_addr_y = 0;
+ lcd.addr.x = 0;
+ lcd.addr.y = 0;
lcd_gotoxy();
}
{
int pos;
- lcd_addr_x = 0;
- lcd_addr_y = 0;
+ lcd.addr.x = 0;
+ lcd.addr.y = 0;
lcd_gotoxy();
spin_lock_irq(&pprt_lock);
- for (pos = 0; pos < lcd_height * lcd_hwidth; pos++) {
+ for (pos = 0; pos < lcd.height * lcd.hwidth; pos++) {
/* present the data to the data port */
w_dtr(pprt, ' ');
}
spin_unlock_irq(&pprt_lock);
- lcd_addr_x = 0;
- lcd_addr_y = 0;
+ lcd.addr.x = 0;
+ lcd.addr.y = 0;
lcd_gotoxy();
}
{
int pos;
- lcd_addr_x = 0;
- lcd_addr_y = 0;
+ lcd.addr.x = 0;
+ lcd.addr.y = 0;
lcd_gotoxy();
spin_lock_irq(&pprt_lock);
- for (pos = 0; pos < lcd_height * lcd_hwidth; pos++) {
+ for (pos = 0; pos < lcd.height * lcd.hwidth; pos++) {
/* present the data to the data port */
w_dtr(pprt, ' ');
udelay(60);
spin_unlock_irq(&pprt_lock);
- lcd_addr_x = 0;
- lcd_addr_y = 0;
+ lcd.addr.x = 0;
+ lcd.addr.y = 0;
lcd_gotoxy();
}
static void lcd_clear_display(void)
{
lcd_write_cmd(0x01); /* clear display */
- lcd_addr_x = 0;
- lcd_addr_y = 0;
+ lcd.addr.x = 0;
+ lcd.addr.y = 0;
/* we must wait a few milliseconds (15) */
long_sleep(15);
}
static void lcd_init_display(void)
{
- lcd_flags = ((lcd_height > 1) ? LCD_FLAG_N : 0)
+ lcd.flags = ((lcd.height > 1) ? LCD_FLAG_N : 0)
| LCD_FLAG_D | LCD_FLAG_C | LCD_FLAG_B;
long_sleep(20); /* wait 20 ms after power-up for the paranoid */
long_sleep(10);
lcd_write_cmd(0x30 /* set font height and lines number */
- | ((lcd_flags & LCD_FLAG_F) ? 4 : 0)
- | ((lcd_flags & LCD_FLAG_N) ? 8 : 0)
+ | ((lcd.flags & LCD_FLAG_F) ? 4 : 0)
+ | ((lcd.flags & LCD_FLAG_N) ? 8 : 0)
);
long_sleep(10);
long_sleep(10);
lcd_write_cmd(0x08 /* set display mode */
- | ((lcd_flags & LCD_FLAG_D) ? 4 : 0)
- | ((lcd_flags & LCD_FLAG_C) ? 2 : 0)
- | ((lcd_flags & LCD_FLAG_B) ? 1 : 0)
+ | ((lcd.flags & LCD_FLAG_D) ? 4 : 0)
+ | ((lcd.flags & LCD_FLAG_C) ? 2 : 0)
+ | ((lcd.flags & LCD_FLAG_B) ? 1 : 0)
);
- lcd_backlight((lcd_flags & LCD_FLAG_L) ? 1 : 0);
+ lcd_backlight((lcd.flags & LCD_FLAG_L) ? 1 : 0);
long_sleep(10);
int processed = 0;
- char *esc = lcd_escape + 2;
- int oldflags = lcd_flags;
+ char *esc = lcd.esc_seq.buf + 2;
+ int oldflags = lcd.flags;
/* check for display mode flags */
switch (*esc) {
case 'D': /* Display ON */
- lcd_flags |= LCD_FLAG_D;
+ lcd.flags |= LCD_FLAG_D;
processed = 1;
break;
case 'd': /* Display OFF */
- lcd_flags &= ~LCD_FLAG_D;
+ lcd.flags &= ~LCD_FLAG_D;
processed = 1;
break;
case 'C': /* Cursor ON */
- lcd_flags |= LCD_FLAG_C;
+ lcd.flags |= LCD_FLAG_C;
processed = 1;
break;
case 'c': /* Cursor OFF */
- lcd_flags &= ~LCD_FLAG_C;
+ lcd.flags &= ~LCD_FLAG_C;
processed = 1;
break;
case 'B': /* Blink ON */
- lcd_flags |= LCD_FLAG_B;
+ lcd.flags |= LCD_FLAG_B;
processed = 1;
break;
case 'b': /* Blink OFF */
- lcd_flags &= ~LCD_FLAG_B;
+ lcd.flags &= ~LCD_FLAG_B;
processed = 1;
break;
case '+': /* Back light ON */
- lcd_flags |= LCD_FLAG_L;
+ lcd.flags |= LCD_FLAG_L;
processed = 1;
break;
case '-': /* Back light OFF */
- lcd_flags &= ~LCD_FLAG_L;
+ lcd.flags &= ~LCD_FLAG_L;
processed = 1;
break;
case '*':
/* flash back light using the keypad timer */
if (scan_timer.function != NULL) {
- if (light_tempo == 0 && ((lcd_flags & LCD_FLAG_L) == 0))
+ if (lcd.light_tempo == 0
+ && ((lcd.flags & LCD_FLAG_L) == 0))
lcd_backlight(1);
- light_tempo = FLASH_LIGHT_TEMPO;
+ lcd.light_tempo = FLASH_LIGHT_TEMPO;
}
processed = 1;
break;
case 'f': /* Small Font */
- lcd_flags &= ~LCD_FLAG_F;
+ lcd.flags &= ~LCD_FLAG_F;
processed = 1;
break;
case 'F': /* Large Font */
- lcd_flags |= LCD_FLAG_F;
+ lcd.flags |= LCD_FLAG_F;
processed = 1;
break;
case 'n': /* One Line */
- lcd_flags &= ~LCD_FLAG_N;
+ lcd.flags &= ~LCD_FLAG_N;
processed = 1;
break;
case 'N': /* Two Lines */
- lcd_flags |= LCD_FLAG_N;
+ lcd.flags |= LCD_FLAG_N;
break;
case 'l': /* Shift Cursor Left */
- if (lcd_addr_x > 0) {
+ if (lcd.addr.x > 0) {
/* back one char if not at end of line */
- if (lcd_addr_x < lcd_bwidth)
+ if (lcd.addr.x < lcd.bwidth)
lcd_write_cmd(0x10);
- lcd_addr_x--;
+ lcd.addr.x--;
}
processed = 1;
break;
case 'r': /* shift cursor right */
- if (lcd_addr_x < lcd_width) {
+ if (lcd.addr.x < lcd.width) {
/* allow the cursor to pass the end of the line */
- if (lcd_addr_x <
- (lcd_bwidth - 1))
+ if (lcd.addr.x <
+ (lcd.bwidth - 1))
lcd_write_cmd(0x14);
- lcd_addr_x++;
+ lcd.addr.x++;
}
processed = 1;
break;
case 'L': /* shift display left */
- lcd_left_shift++;
lcd_write_cmd(0x18);
processed = 1;
break;
case 'R': /* shift display right */
- lcd_left_shift--;
lcd_write_cmd(0x1C);
processed = 1;
break;
case 'k': { /* kill end of line */
int x;
- for (x = lcd_addr_x; x < lcd_bwidth; x++)
+ for (x = lcd.addr.x; x < lcd.bwidth; x++)
lcd_write_data(' ');
/* restore cursor position */
}
case 'I': /* reinitialize display */
lcd_init_display();
- lcd_left_shift = 0;
processed = 1;
break;
case 'G': {
while (*esc) {
if (*esc == 'x') {
esc++;
- if (kstrtoul(esc, 10, &lcd_addr_x) < 0)
+ if (kstrtoul(esc, 10, &lcd.addr.x) < 0)
break;
} else if (*esc == 'y') {
esc++;
- if (kstrtoul(esc, 10, &lcd_addr_y) < 0)
+ if (kstrtoul(esc, 10, &lcd.addr.y) < 0)
break;
} else {
break;
}
/* Check whether one flag was changed */
- if (oldflags != lcd_flags) {
+ if (oldflags != lcd.flags) {
/* check whether one of B,C,D flags were changed */
- if ((oldflags ^ lcd_flags) &
+ if ((oldflags ^ lcd.flags) &
(LCD_FLAG_B | LCD_FLAG_C | LCD_FLAG_D))
/* set display mode */
lcd_write_cmd(0x08
- | ((lcd_flags & LCD_FLAG_D) ? 4 : 0)
- | ((lcd_flags & LCD_FLAG_C) ? 2 : 0)
- | ((lcd_flags & LCD_FLAG_B) ? 1 : 0));
+ | ((lcd.flags & LCD_FLAG_D) ? 4 : 0)
+ | ((lcd.flags & LCD_FLAG_C) ? 2 : 0)
+ | ((lcd.flags & LCD_FLAG_B) ? 1 : 0));
/* check whether one of F,N flags was changed */
- else if ((oldflags ^ lcd_flags) & (LCD_FLAG_F | LCD_FLAG_N))
+ else if ((oldflags ^ lcd.flags) & (LCD_FLAG_F | LCD_FLAG_N))
lcd_write_cmd(0x30
- | ((lcd_flags & LCD_FLAG_F) ? 4 : 0)
- | ((lcd_flags & LCD_FLAG_N) ? 8 : 0));
+ | ((lcd.flags & LCD_FLAG_F) ? 4 : 0)
+ | ((lcd.flags & LCD_FLAG_N) ? 8 : 0));
/* check whether L flag was changed */
- else if ((oldflags ^ lcd_flags) & (LCD_FLAG_L)) {
- if (lcd_flags & (LCD_FLAG_L))
+ else if ((oldflags ^ lcd.flags) & (LCD_FLAG_L)) {
+ if (lcd.flags & (LCD_FLAG_L))
lcd_backlight(1);
- else if (light_tempo == 0)
+ else if (lcd.light_tempo == 0)
/* switch off the light only when the tempo
lighting is gone */
lcd_backlight(0);
static void lcd_write_char(char c)
{
/* first, we'll test if we're in escape mode */
- if ((c != '\n') && lcd_escape_len >= 0) {
+ if ((c != '\n') && lcd.esc_seq.len >= 0) {
/* yes, let's add this char to the buffer */
- lcd_escape[lcd_escape_len++] = c;
- lcd_escape[lcd_escape_len] = 0;
+ lcd.esc_seq.buf[lcd.esc_seq.len++] = c;
+ lcd.esc_seq.buf[lcd.esc_seq.len] = 0;
} else {
/* aborts any previous escape sequence */
- lcd_escape_len = -1;
+ lcd.esc_seq.len = -1;
switch (c) {
case LCD_ESCAPE_CHAR:
/* start of an escape sequence */
- lcd_escape_len = 0;
- lcd_escape[lcd_escape_len] = 0;
+ lcd.esc_seq.len = 0;
+ lcd.esc_seq.buf[lcd.esc_seq.len] = 0;
break;
case '\b':
/* go back one char and clear it */
- if (lcd_addr_x > 0) {
+ if (lcd.addr.x > 0) {
/* check if we're not at the
end of the line */
- if (lcd_addr_x < lcd_bwidth)
+ if (lcd.addr.x < lcd.bwidth)
/* back one char */
lcd_write_cmd(0x10);
- lcd_addr_x--;
+ lcd.addr.x--;
}
/* replace with a space */
lcd_write_data(' ');
case '\n':
/* flush the remainder of the current line and
go to the beginning of the next line */
- for (; lcd_addr_x < lcd_bwidth; lcd_addr_x++)
+ for (; lcd.addr.x < lcd.bwidth; lcd.addr.x++)
lcd_write_data(' ');
- lcd_addr_x = 0;
- lcd_addr_y = (lcd_addr_y + 1) % lcd_height;
+ lcd.addr.x = 0;
+ lcd.addr.y = (lcd.addr.y + 1) % lcd.height;
lcd_gotoxy();
break;
case '\r':
/* go to the beginning of the same line */
- lcd_addr_x = 0;
+ lcd.addr.x = 0;
lcd_gotoxy();
break;
case '\t':
/* now we'll see if we're in an escape mode and if the current
escape sequence can be understood. */
- if (lcd_escape_len >= 2) {
+ if (lcd.esc_seq.len >= 2) {
int processed = 0;
- if (!strcmp(lcd_escape, "[2J")) {
+ if (!strcmp(lcd.esc_seq.buf, "[2J")) {
/* clear the display */
lcd_clear_fast();
processed = 1;
- } else if (!strcmp(lcd_escape, "[H")) {
+ } else if (!strcmp(lcd.esc_seq.buf, "[H")) {
/* cursor to home */
- lcd_addr_x = 0;
- lcd_addr_y = 0;
+ lcd.addr.x = 0;
+ lcd.addr.y = 0;
lcd_gotoxy();
processed = 1;
}
/* codes starting with ^[[L */
- else if ((lcd_escape_len >= 3) &&
- (lcd_escape[0] == '[') &&
- (lcd_escape[1] == 'L')) {
+ else if ((lcd.esc_seq.len >= 3) &&
+ (lcd.esc_seq.buf[0] == '[') &&
+ (lcd.esc_seq.buf[1] == 'L')) {
processed = handle_lcd_special_code();
}
/* LCD special escape codes */
/* flush the escape sequence if it's been processed
or if it is getting too long. */
- if (processed || (lcd_escape_len >= LCD_ESCAPE_LEN))
- lcd_escape_len = -1;
+ if (processed || (lcd.esc_seq.len >= LCD_ESCAPE_LEN))
+ lcd.esc_seq.len = -1;
} /* escape codes */
}
static int lcd_open(struct inode *inode, struct file *file)
{
- if (lcd_open_cnt)
+ if (!atomic_dec_and_test(&lcd_available))
return -EBUSY; /* open only once at a time */
if (file->f_mode & FMODE_READ) /* device is write-only */
return -EPERM;
- if (lcd_must_clear) {
+ if (lcd.must_clear) {
lcd_clear_display();
- lcd_must_clear = 0;
+ lcd.must_clear = false;
}
- lcd_open_cnt++;
return nonseekable_open(inode, file);
}
static int lcd_release(struct inode *inode, struct file *file)
{
- lcd_open_cnt--;
+ atomic_inc(&lcd_available);
return 0;
}
};
static struct miscdevice lcd_dev = {
- LCD_MINOR,
- "lcd",
- &lcd_fops
+ .minor = LCD_MINOR,
+ .name = "lcd",
+ .fops = &lcd_fops,
};
/* public function usable from the kernel for any purpose */
const char *tmp = s;
int count = strlen(s);
- if (lcd_enabled && lcd_initialized) {
+ if (lcd.enabled && lcd.initialized) {
for (; count-- > 0; tmp++) {
if (!in_interrupt() && (((count + 1) & 0x1f) == 0))
/* let's be a little nice with other processes
/* initialize the LCD driver */
static void lcd_init(void)
{
- switch (lcd_type) {
+ switch (selected_lcd_type) {
case LCD_TYPE_OLD:
/* parallel mode, 8 bits */
- if (lcd_proto < 0)
- lcd_proto = LCD_PROTO_PARALLEL;
- if (lcd_charset < 0)
- lcd_charset = LCD_CHARSET_NORMAL;
- if (lcd_e_pin == PIN_NOT_SET)
- lcd_e_pin = PIN_STROBE;
- if (lcd_rs_pin == PIN_NOT_SET)
- lcd_rs_pin = PIN_AUTOLF;
-
- if (lcd_width < 0)
- lcd_width = 40;
- if (lcd_bwidth < 0)
- lcd_bwidth = 40;
- if (lcd_hwidth < 0)
- lcd_hwidth = 64;
- if (lcd_height < 0)
- lcd_height = 2;
+ lcd.proto = LCD_PROTO_PARALLEL;
+ lcd.charset = LCD_CHARSET_NORMAL;
+ lcd.pins.e = PIN_STROBE;
+ lcd.pins.rs = PIN_AUTOLF;
+
+ lcd.width = 40;
+ lcd.bwidth = 40;
+ lcd.hwidth = 64;
+ lcd.height = 2;
break;
case LCD_TYPE_KS0074:
/* serial mode, ks0074 */
- if (lcd_proto < 0)
- lcd_proto = LCD_PROTO_SERIAL;
- if (lcd_charset < 0)
- lcd_charset = LCD_CHARSET_KS0074;
- if (lcd_bl_pin == PIN_NOT_SET)
- lcd_bl_pin = PIN_AUTOLF;
- if (lcd_cl_pin == PIN_NOT_SET)
- lcd_cl_pin = PIN_STROBE;
- if (lcd_da_pin == PIN_NOT_SET)
- lcd_da_pin = PIN_D0;
-
- if (lcd_width < 0)
- lcd_width = 16;
- if (lcd_bwidth < 0)
- lcd_bwidth = 40;
- if (lcd_hwidth < 0)
- lcd_hwidth = 16;
- if (lcd_height < 0)
- lcd_height = 2;
+ lcd.proto = LCD_PROTO_SERIAL;
+ lcd.charset = LCD_CHARSET_KS0074;
+ lcd.pins.bl = PIN_AUTOLF;
+ lcd.pins.cl = PIN_STROBE;
+ lcd.pins.da = PIN_D0;
+
+ lcd.width = 16;
+ lcd.bwidth = 40;
+ lcd.hwidth = 16;
+ lcd.height = 2;
break;
case LCD_TYPE_NEXCOM:
/* parallel mode, 8 bits, generic */
- if (lcd_proto < 0)
- lcd_proto = LCD_PROTO_PARALLEL;
- if (lcd_charset < 0)
- lcd_charset = LCD_CHARSET_NORMAL;
- if (lcd_e_pin == PIN_NOT_SET)
- lcd_e_pin = PIN_AUTOLF;
- if (lcd_rs_pin == PIN_NOT_SET)
- lcd_rs_pin = PIN_SELECP;
- if (lcd_rw_pin == PIN_NOT_SET)
- lcd_rw_pin = PIN_INITP;
-
- if (lcd_width < 0)
- lcd_width = 16;
- if (lcd_bwidth < 0)
- lcd_bwidth = 40;
- if (lcd_hwidth < 0)
- lcd_hwidth = 64;
- if (lcd_height < 0)
- lcd_height = 2;
+ lcd.proto = LCD_PROTO_PARALLEL;
+ lcd.charset = LCD_CHARSET_NORMAL;
+ lcd.pins.e = PIN_AUTOLF;
+ lcd.pins.rs = PIN_SELECP;
+ lcd.pins.rw = PIN_INITP;
+
+ lcd.width = 16;
+ lcd.bwidth = 40;
+ lcd.hwidth = 64;
+ lcd.height = 2;
break;
case LCD_TYPE_CUSTOM:
/* customer-defined */
- if (lcd_proto < 0)
- lcd_proto = DEFAULT_LCD_PROTO;
- if (lcd_charset < 0)
- lcd_charset = DEFAULT_LCD_CHARSET;
+ lcd.proto = DEFAULT_LCD_PROTO;
+ lcd.charset = DEFAULT_LCD_CHARSET;
/* default geometry will be set later */
break;
case LCD_TYPE_HANTRONIX:
/* parallel mode, 8 bits, hantronix-like */
default:
- if (lcd_proto < 0)
- lcd_proto = LCD_PROTO_PARALLEL;
- if (lcd_charset < 0)
- lcd_charset = LCD_CHARSET_NORMAL;
- if (lcd_e_pin == PIN_NOT_SET)
- lcd_e_pin = PIN_STROBE;
- if (lcd_rs_pin == PIN_NOT_SET)
- lcd_rs_pin = PIN_SELECP;
-
- if (lcd_width < 0)
- lcd_width = 16;
- if (lcd_bwidth < 0)
- lcd_bwidth = 40;
- if (lcd_hwidth < 0)
- lcd_hwidth = 64;
- if (lcd_height < 0)
- lcd_height = 2;
+ lcd.proto = LCD_PROTO_PARALLEL;
+ lcd.charset = LCD_CHARSET_NORMAL;
+ lcd.pins.e = PIN_STROBE;
+ lcd.pins.rs = PIN_SELECP;
+
+ lcd.width = 16;
+ lcd.bwidth = 40;
+ lcd.hwidth = 64;
+ lcd.height = 2;
break;
}
+ /* Overwrite with module params set on loading */
+ if (lcd_height != NOT_SET)
+ lcd.height = lcd_height;
+ if (lcd_width != NOT_SET)
+ lcd.width = lcd_width;
+ if (lcd_bwidth != NOT_SET)
+ lcd.bwidth = lcd_bwidth;
+ if (lcd_hwidth != NOT_SET)
+ lcd.hwidth = lcd_hwidth;
+ if (lcd_charset != NOT_SET)
+ lcd.charset = lcd_charset;
+ if (lcd_proto != NOT_SET)
+ lcd.proto = lcd_proto;
+ if (lcd_e_pin != PIN_NOT_SET)
+ lcd.pins.e = lcd_e_pin;
+ if (lcd_rs_pin != PIN_NOT_SET)
+ lcd.pins.rs = lcd_rs_pin;
+ if (lcd_rw_pin != PIN_NOT_SET)
+ lcd.pins.rw = lcd_rw_pin;
+ if (lcd_cl_pin != PIN_NOT_SET)
+ lcd.pins.cl = lcd_cl_pin;
+ if (lcd_da_pin != PIN_NOT_SET)
+ lcd.pins.da = lcd_da_pin;
+ if (lcd_bl_pin != PIN_NOT_SET)
+ lcd.pins.bl = lcd_bl_pin;
+
/* this is used to catch wrong and default values */
- if (lcd_width <= 0)
- lcd_width = DEFAULT_LCD_WIDTH;
- if (lcd_bwidth <= 0)
- lcd_bwidth = DEFAULT_LCD_BWIDTH;
- if (lcd_hwidth <= 0)
- lcd_hwidth = DEFAULT_LCD_HWIDTH;
- if (lcd_height <= 0)
- lcd_height = DEFAULT_LCD_HEIGHT;
-
- if (lcd_proto == LCD_PROTO_SERIAL) { /* SERIAL */
+ if (lcd.width <= 0)
+ lcd.width = DEFAULT_LCD_WIDTH;
+ if (lcd.bwidth <= 0)
+ lcd.bwidth = DEFAULT_LCD_BWIDTH;
+ if (lcd.hwidth <= 0)
+ lcd.hwidth = DEFAULT_LCD_HWIDTH;
+ if (lcd.height <= 0)
+ lcd.height = DEFAULT_LCD_HEIGHT;
+
+ if (lcd.proto == LCD_PROTO_SERIAL) { /* SERIAL */
lcd_write_cmd = lcd_write_cmd_s;
lcd_write_data = lcd_write_data_s;
lcd_clear_fast = lcd_clear_fast_s;
- if (lcd_cl_pin == PIN_NOT_SET)
- lcd_cl_pin = DEFAULT_LCD_PIN_SCL;
- if (lcd_da_pin == PIN_NOT_SET)
- lcd_da_pin = DEFAULT_LCD_PIN_SDA;
+ if (lcd.pins.cl == PIN_NOT_SET)
+ lcd.pins.cl = DEFAULT_LCD_PIN_SCL;
+ if (lcd.pins.da == PIN_NOT_SET)
+ lcd.pins.da = DEFAULT_LCD_PIN_SDA;
- } else if (lcd_proto == LCD_PROTO_PARALLEL) { /* PARALLEL */
+ } else if (lcd.proto == LCD_PROTO_PARALLEL) { /* PARALLEL */
lcd_write_cmd = lcd_write_cmd_p8;
lcd_write_data = lcd_write_data_p8;
lcd_clear_fast = lcd_clear_fast_p8;
- if (lcd_e_pin == PIN_NOT_SET)
- lcd_e_pin = DEFAULT_LCD_PIN_E;
- if (lcd_rs_pin == PIN_NOT_SET)
- lcd_rs_pin = DEFAULT_LCD_PIN_RS;
- if (lcd_rw_pin == PIN_NOT_SET)
- lcd_rw_pin = DEFAULT_LCD_PIN_RW;
+ if (lcd.pins.e == PIN_NOT_SET)
+ lcd.pins.e = DEFAULT_LCD_PIN_E;
+ if (lcd.pins.rs == PIN_NOT_SET)
+ lcd.pins.rs = DEFAULT_LCD_PIN_RS;
+ if (lcd.pins.rw == PIN_NOT_SET)
+ lcd.pins.rw = DEFAULT_LCD_PIN_RW;
} else {
lcd_write_cmd = lcd_write_cmd_tilcd;
lcd_write_data = lcd_write_data_tilcd;
lcd_clear_fast = lcd_clear_fast_tilcd;
}
- if (lcd_bl_pin == PIN_NOT_SET)
- lcd_bl_pin = DEFAULT_LCD_PIN_BL;
-
- if (lcd_e_pin == PIN_NOT_SET)
- lcd_e_pin = PIN_NONE;
- if (lcd_rs_pin == PIN_NOT_SET)
- lcd_rs_pin = PIN_NONE;
- if (lcd_rw_pin == PIN_NOT_SET)
- lcd_rw_pin = PIN_NONE;
- if (lcd_bl_pin == PIN_NOT_SET)
- lcd_bl_pin = PIN_NONE;
- if (lcd_cl_pin == PIN_NOT_SET)
- lcd_cl_pin = PIN_NONE;
- if (lcd_da_pin == PIN_NOT_SET)
- lcd_da_pin = PIN_NONE;
-
- if (lcd_charset < 0)
- lcd_charset = DEFAULT_LCD_CHARSET;
-
- if (lcd_charset == LCD_CHARSET_KS0074)
+ if (lcd.pins.bl == PIN_NOT_SET)
+ lcd.pins.bl = DEFAULT_LCD_PIN_BL;
+
+ if (lcd.pins.e == PIN_NOT_SET)
+ lcd.pins.e = PIN_NONE;
+ if (lcd.pins.rs == PIN_NOT_SET)
+ lcd.pins.rs = PIN_NONE;
+ if (lcd.pins.rw == PIN_NOT_SET)
+ lcd.pins.rw = PIN_NONE;
+ if (lcd.pins.bl == PIN_NOT_SET)
+ lcd.pins.bl = PIN_NONE;
+ if (lcd.pins.cl == PIN_NOT_SET)
+ lcd.pins.cl = PIN_NONE;
+ if (lcd.pins.da == PIN_NOT_SET)
+ lcd.pins.da = PIN_NONE;
+
+ if (lcd.charset == NOT_SET)
+ lcd.charset = DEFAULT_LCD_CHARSET;
+
+ if (lcd.charset == LCD_CHARSET_KS0074)
lcd_char_conv = lcd_char_conv_ks0074;
else
lcd_char_conv = NULL;
- if (lcd_bl_pin != PIN_NONE)
+ if (lcd.pins.bl != PIN_NONE)
init_scan_timer();
- pin_to_bits(lcd_e_pin, lcd_bits[LCD_PORT_D][LCD_BIT_E],
+ pin_to_bits(lcd.pins.e, lcd_bits[LCD_PORT_D][LCD_BIT_E],
lcd_bits[LCD_PORT_C][LCD_BIT_E]);
- pin_to_bits(lcd_rs_pin, lcd_bits[LCD_PORT_D][LCD_BIT_RS],
+ pin_to_bits(lcd.pins.rs, lcd_bits[LCD_PORT_D][LCD_BIT_RS],
lcd_bits[LCD_PORT_C][LCD_BIT_RS]);
- pin_to_bits(lcd_rw_pin, lcd_bits[LCD_PORT_D][LCD_BIT_RW],
+ pin_to_bits(lcd.pins.rw, lcd_bits[LCD_PORT_D][LCD_BIT_RW],
lcd_bits[LCD_PORT_C][LCD_BIT_RW]);
- pin_to_bits(lcd_bl_pin, lcd_bits[LCD_PORT_D][LCD_BIT_BL],
+ pin_to_bits(lcd.pins.bl, lcd_bits[LCD_PORT_D][LCD_BIT_BL],
lcd_bits[LCD_PORT_C][LCD_BIT_BL]);
- pin_to_bits(lcd_cl_pin, lcd_bits[LCD_PORT_D][LCD_BIT_CL],
+ pin_to_bits(lcd.pins.cl, lcd_bits[LCD_PORT_D][LCD_BIT_CL],
lcd_bits[LCD_PORT_C][LCD_BIT_CL]);
- pin_to_bits(lcd_da_pin, lcd_bits[LCD_PORT_D][LCD_BIT_DA],
+ pin_to_bits(lcd.pins.da, lcd_bits[LCD_PORT_D][LCD_BIT_DA],
lcd_bits[LCD_PORT_C][LCD_BIT_DA]);
/* before this line, we must NOT send anything to the display.
* Since lcd_init_display() needs to write data, we have to
* enable mark the LCD initialized just before. */
- lcd_initialized = 1;
+ lcd.initialized = true;
lcd_init_display();
/* display a short message */
panel_lcd_print("\x1b[Lc\x1b[Lb\x1b[L*Linux-" UTS_RELEASE "\nPanel-"
PANEL_VERSION);
#endif
- lcd_addr_x = 0;
- lcd_addr_y = 0;
+ lcd.addr.x = 0;
+ lcd.addr.y = 0;
/* clear the display on the next device opening */
- lcd_must_clear = 1;
+ lcd.must_clear = true;
lcd_gotoxy();
}
static int keypad_open(struct inode *inode, struct file *file)
{
- if (keypad_open_cnt)
+ if (!atomic_dec_and_test(&keypad_available))
return -EBUSY; /* open only once at a time */
if (file->f_mode & FMODE_WRITE) /* device is read-only */
return -EPERM;
keypad_buflen = 0; /* flush the buffer on opening */
- keypad_open_cnt++;
return 0;
}
static int keypad_release(struct inode *inode, struct file *file)
{
- keypad_open_cnt--;
+ atomic_inc(&keypad_available);
return 0;
}
};
static struct miscdevice keypad_dev = {
- KEYPAD_MINOR,
- "keypad",
- &keypad_fops
+ .minor = KEYPAD_MINOR,
+ .name = "keypad",
+ .fops = &keypad_fops,
};
static void keypad_send_key(const char *string, int max_len)
return;
/* send the key to the device only if a process is attached to it. */
- if (keypad_open_cnt > 0) {
+ if (!atomic_read(&keypad_available)) {
while (max_len-- && keypad_buflen < KEYPAD_BUFFER && *string) {
keypad_buffer[(keypad_start + keypad_buflen++) %
KEYPAD_BUFFER] = *string++;
static void panel_scan_timer(void)
{
- if (keypad_enabled && keypad_initialized) {
+ if (keypad.enabled && keypad_initialized) {
if (spin_trylock_irq(&pprt_lock)) {
phys_scan_contacts();
panel_process_inputs();
}
- if (lcd_enabled && lcd_initialized) {
+ if (lcd.enabled && lcd.initialized) {
if (keypressed) {
- if (light_tempo == 0 && ((lcd_flags & LCD_FLAG_L) == 0))
+ if (lcd.light_tempo == 0
+ && ((lcd.flags & LCD_FLAG_L) == 0))
lcd_backlight(1);
- light_tempo = FLASH_LIGHT_TEMPO;
- } else if (light_tempo > 0) {
- light_tempo--;
- if (light_tempo == 0 && ((lcd_flags & LCD_FLAG_L) == 0))
+ lcd.light_tempo = FLASH_LIGHT_TEMPO;
+ } else if (lcd.light_tempo > 0) {
+ lcd.light_tempo--;
+ if (lcd.light_tempo == 0
+ && ((lcd.flags & LCD_FLAG_L) == 0))
lcd_backlight(0);
}
}
static int panel_notify_sys(struct notifier_block *this, unsigned long code,
void *unused)
{
- if (lcd_enabled && lcd_initialized) {
+ if (lcd.enabled && lcd.initialized) {
switch (code) {
case SYS_DOWN:
panel_lcd_print
/* must init LCD first, just in case an IRQ from the keypad is
* generated at keypad init
*/
- if (lcd_enabled) {
+ if (lcd.enabled) {
lcd_init();
if (misc_register(&lcd_dev))
goto err_unreg_device;
}
- if (keypad_enabled) {
+ if (keypad.enabled) {
keypad_init();
if (misc_register(&keypad_dev))
goto err_lcd_unreg;
return;
err_lcd_unreg:
- if (lcd_enabled)
+ if (lcd.enabled)
misc_deregister(&lcd_dev);
err_unreg_device:
parport_unregister_device(pprt);
return;
}
- if (keypad_enabled && keypad_initialized) {
+ if (keypad.enabled && keypad_initialized) {
misc_deregister(&keypad_dev);
keypad_initialized = 0;
}
- if (lcd_enabled && lcd_initialized) {
+ if (lcd.enabled && lcd.initialized) {
misc_deregister(&lcd_dev);
- lcd_initialized = 0;
+ lcd.initialized = false;
}
parport_release(pprt);
};
/* init function */
-static int panel_init(void)
+static int __init panel_init_module(void)
{
- /* for backwards compatibility */
- if (keypad_type < 0)
- keypad_type = keypad_enabled;
-
- if (lcd_type < 0)
- lcd_type = lcd_enabled;
-
- if (parport < 0)
- parport = DEFAULT_PARPORT;
+ int selected_keypad_type = NOT_SET;
/* take care of an eventual profile */
switch (profile) {
case PANEL_PROFILE_CUSTOM:
/* custom profile */
- if (keypad_type < 0)
- keypad_type = DEFAULT_KEYPAD;
- if (lcd_type < 0)
- lcd_type = DEFAULT_LCD;
+ selected_keypad_type = DEFAULT_KEYPAD_TYPE;
+ selected_lcd_type = DEFAULT_LCD_TYPE;
break;
case PANEL_PROFILE_OLD:
/* 8 bits, 2*16, old keypad */
- if (keypad_type < 0)
- keypad_type = KEYPAD_TYPE_OLD;
- if (lcd_type < 0)
- lcd_type = LCD_TYPE_OLD;
- if (lcd_width < 0)
+ selected_keypad_type = KEYPAD_TYPE_OLD;
+ selected_lcd_type = LCD_TYPE_OLD;
+
+ /* TODO: This two are a little hacky, sort it out later */
+ if (lcd_width == NOT_SET)
lcd_width = 16;
- if (lcd_hwidth < 0)
+ if (lcd_hwidth == NOT_SET)
lcd_hwidth = 16;
break;
case PANEL_PROFILE_NEW:
/* serial, 2*16, new keypad */
- if (keypad_type < 0)
- keypad_type = KEYPAD_TYPE_NEW;
- if (lcd_type < 0)
- lcd_type = LCD_TYPE_KS0074;
+ selected_keypad_type = KEYPAD_TYPE_NEW;
+ selected_lcd_type = LCD_TYPE_KS0074;
break;
case PANEL_PROFILE_HANTRONIX:
/* 8 bits, 2*16 hantronix-like, no keypad */
- if (keypad_type < 0)
- keypad_type = KEYPAD_TYPE_NONE;
- if (lcd_type < 0)
- lcd_type = LCD_TYPE_HANTRONIX;
+ selected_keypad_type = KEYPAD_TYPE_NONE;
+ selected_lcd_type = LCD_TYPE_HANTRONIX;
break;
case PANEL_PROFILE_NEXCOM:
/* generic 8 bits, 2*16, nexcom keypad, eg. Nexcom. */
- if (keypad_type < 0)
- keypad_type = KEYPAD_TYPE_NEXCOM;
- if (lcd_type < 0)
- lcd_type = LCD_TYPE_NEXCOM;
+ selected_keypad_type = KEYPAD_TYPE_NEXCOM;
+ selected_lcd_type = LCD_TYPE_NEXCOM;
break;
case PANEL_PROFILE_LARGE:
/* 8 bits, 2*40, old keypad */
- if (keypad_type < 0)
- keypad_type = KEYPAD_TYPE_OLD;
- if (lcd_type < 0)
- lcd_type = LCD_TYPE_OLD;
+ selected_keypad_type = KEYPAD_TYPE_OLD;
+ selected_lcd_type = LCD_TYPE_OLD;
break;
}
- lcd_enabled = (lcd_type > 0);
- keypad_enabled = (keypad_type > 0);
+ /*
+ * Init lcd struct with load-time values to preserve exact current
+ * functionality (at least for now).
+ */
+ lcd.height = lcd_height;
+ lcd.width = lcd_width;
+ lcd.bwidth = lcd_bwidth;
+ lcd.hwidth = lcd_hwidth;
+ lcd.charset = lcd_charset;
+ lcd.proto = lcd_proto;
+ lcd.pins.e = lcd_e_pin;
+ lcd.pins.rs = lcd_rs_pin;
+ lcd.pins.rw = lcd_rw_pin;
+ lcd.pins.cl = lcd_cl_pin;
+ lcd.pins.da = lcd_da_pin;
+ lcd.pins.bl = lcd_bl_pin;
+
+ /* Leave it for now, just in case */
+ lcd.esc_seq.len = -1;
+
+ /*
+ * Overwrite selection with module param values (both keypad and lcd),
+ * where the deprecated params have lower prio.
+ */
+ if (keypad_enabled != NOT_SET)
+ selected_keypad_type = keypad_enabled;
+ if (keypad_type != NOT_SET)
+ selected_keypad_type = keypad_type;
- switch (keypad_type) {
+ keypad.enabled = (selected_keypad_type > 0);
+
+ if (lcd_enabled != NOT_SET)
+ selected_lcd_type = lcd_enabled;
+ if (lcd_type != NOT_SET)
+ selected_lcd_type = lcd_type;
+
+ lcd.enabled = (selected_lcd_type > 0);
+
+ switch (selected_keypad_type) {
case KEYPAD_TYPE_OLD:
keypad_profile = old_keypad_profile;
break;
return -EIO;
}
- if (!lcd_enabled && !keypad_enabled) {
+ if (!lcd.enabled && !keypad.enabled) {
/* no device enabled, let's release the parport */
if (pprt) {
parport_release(pprt);
return 0;
}
-static int __init panel_init_module(void)
-{
- return panel_init();
-}
-
static void __exit panel_cleanup_module(void)
{
unregister_reboot_notifier(&panel_notifier);
del_timer_sync(&scan_timer);
if (pprt != NULL) {
- if (keypad_enabled) {
+ if (keypad.enabled) {
misc_deregister(&keypad_dev);
keypad_initialized = 0;
}
- if (lcd_enabled) {
+ if (lcd.enabled) {
panel_lcd_print("\x0cLCD driver " PANEL_VERSION
"\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-");
misc_deregister(&lcd_dev);
- lcd_initialized = 0;
+ lcd.initialized = false;
}
/* TODO: free all input signals */
projects / deliverable / linux.git / blobdiff