serial: sh-sci: Replace hardcoded values in SCxSR_*_CLEAR macros

[deliverable/linux.git] / drivers / tty / serial / sh-sci.h

diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index 5282738375ae309d225c06ba5689f881759c0a14..3939513b04547e7f33e44672ec5e126179ac26c7 100644 (file)
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -50,10 +50,16 @@ enum {
 #define SCI_FER                BIT(4)  /* Framing Error */
 #define SCI_PER                BIT(3)  /* Parity Error */
 #define SCI_TEND       BIT(2)  /* Transmit End */
+#define SCI_RESERVED   0x03    /* All reserved bits */
 
 #define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
 
-/* SCxSR (Serial Status Register) on SCIF, HSCIF */
+#define SCI_RDxF_CLEAR ~(SCI_RESERVED | SCI_RDRF)
+#define SCI_ERROR_CLEAR        ~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER)
+#define SCI_TDxE_CLEAR ~(SCI_RESERVED | SCI_TEND | SCI_TDRE)
+#define SCI_BREAK_CLEAR        ~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER)
+
+/* SCxSR (Serial Status Register) on SCIF, SCIFA, SCIFB, HSCIF */
 #define SCIF_ER                BIT(7)  /* Receive Error */
 #define SCIF_TEND      BIT(6)  /* Transmission End */
 #define SCIF_TDFE      BIT(5)  /* Transmit FIFO Data Empty */
@@ -62,8 +68,18 @@ enum {
 #define SCIF_PER       BIT(2)  /* Parity Error */
 #define SCIF_RDF       BIT(1)  /* Receive FIFO Data Full */
 #define SCIF_DR                BIT(0)  /* Receive Data Ready */
+/* SCIF only (optional) */
+#define SCIF_PERC      0xf000  /* Number of Parity Errors */
+#define SCIF_FERC      0x0f00  /* Number of Framing Errors */
+/*SCIFA/SCIFB and SCIF on SH7705/SH7720/SH7721 only */
+#define SCIFA_ORER     BIT(9)  /* Overrun Error */
+
+#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_BRK | SCIF_ER)
 
-#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
+#define SCIF_RDxF_CLEAR                ~(SCIF_DR | SCIF_RDF)
+#define SCIF_ERROR_CLEAR       ~(SCIFA_ORER | SCIF_PER | SCIF_FER | SCIF_ER)
+#define SCIF_TDxE_CLEAR                ~(SCIF_TDFE)
+#define SCIF_BREAK_CLEAR       ~(SCIF_PER | SCIF_FER | SCIF_BRK)
 
 /* SCFCR (FIFO Control Register) */
 #define SCFCR_MCE      BIT(3)  /* Modem Control Enable */
@@ -106,14 +122,22 @@ enum {
     defined(CONFIG_ARCH_SH73A0) || \
     defined(CONFIG_ARCH_R8A7740)
 
-# define SCxSR_RDxF_CLEAR(port)         (serial_port_in(port, SCxSR) & 0xfffc)
-# define SCxSR_ERROR_CLEAR(port) (serial_port_in(port, SCxSR) & 0xfd73)
-# define SCxSR_TDxE_CLEAR(port)         (serial_port_in(port, SCxSR) & 0xffdf)
-# define SCxSR_BREAK_CLEAR(port) (serial_port_in(port, SCxSR) & 0xffe3)
+# define SCxSR_RDxF_CLEAR(port) \
+       (serial_port_in(port, SCxSR) & SCIF_RDxF_CLEAR)
+# define SCxSR_ERROR_CLEAR(port) \
+       (serial_port_in(port, SCxSR) & SCIF_ERROR_CLEAR)
+# define SCxSR_TDxE_CLEAR(port) \
+       (serial_port_in(port, SCxSR) & SCIF_TDxE_CLEAR)
+# define SCxSR_BREAK_CLEAR(port) \
+       (serial_port_in(port, SCxSR) & SCIF_BREAK_CLEAR)
 #else
-# define SCxSR_RDxF_CLEAR(port)         (((port)->type == PORT_SCI) ? 0xbc : 0x00fc)
-# define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073)
-# define SCxSR_TDxE_CLEAR(port)  (((port)->type == PORT_SCI) ? 0x78 : 0x00df)
-# define SCxSR_BREAK_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x00e3)
+# define SCxSR_RDxF_CLEAR(port) \
+       ((((port)->type == PORT_SCI) ? SCI_RDxF_CLEAR : SCIF_RDxF_CLEAR) & 0xff)
+# define SCxSR_ERROR_CLEAR(port) \
+       ((((port)->type == PORT_SCI) ? SCI_ERROR_CLEAR : SCIF_ERROR_CLEAR) & 0xff)
+# define SCxSR_TDxE_CLEAR(port) \
+       ((((port)->type == PORT_SCI) ? SCI_TDxE_CLEAR : SCIF_TDxE_CLEAR) & 0xff)
+# define SCxSR_BREAK_CLEAR(port) \
+       ((((port)->type == PORT_SCI) ? SCI_BREAK_CLEAR : SCIF_BREAK_CLEAR) & 0xff)
 #endif