#include <linux/usb.h>
+#include <linux/usb/ch9.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
unsigned char *buffer0 = buffer;
struct usb_endpoint_descriptor *d;
struct usb_host_endpoint *endpoint;
- int n, i;
+ int n, i, j;
d = (struct usb_endpoint_descriptor *) buffer;
buffer += d->bLength;
memcpy(&endpoint->desc, d, n);
INIT_LIST_HEAD(&endpoint->urb_list);
+ /* Fix up bInterval values outside the legal range. Use 32 ms if no
+ * proper value can be guessed. */
+ i = 0; /* i = min, j = max, n = default */
+ j = 255;
+ if (usb_endpoint_xfer_int(d)) {
+ i = 1;
+ switch (to_usb_device(ddev)->speed) {
+ case USB_SPEED_HIGH:
+ /* Many device manufacturers are using full-speed
+ * bInterval values in high-speed interrupt endpoint
+ * descriptors. Try to fix those and fall back to a
+ * 32 ms default value otherwise. */
+ n = fls(d->bInterval*8);
+ if (n == 0)
+ n = 9; /* 32 ms = 2^(9-1) uframes */
+ j = 16;
+ break;
+ default: /* USB_SPEED_FULL or _LOW */
+ /* For low-speed, 10 ms is the official minimum.
+ * But some "overclocked" devices might want faster
+ * polling so we'll allow it. */
+ n = 32;
+ break;
+ }
+ } else if (usb_endpoint_xfer_isoc(d)) {
+ i = 1;
+ j = 16;
+ switch (to_usb_device(ddev)->speed) {
+ case USB_SPEED_HIGH:
+ n = 9; /* 32 ms = 2^(9-1) uframes */
+ break;
+ default: /* USB_SPEED_FULL */
+ n = 6; /* 32 ms = 2^(6-1) frames */
+ break;
+ }
+ }
+ if (d->bInterval < i || d->bInterval > j) {
+ dev_warn(ddev, "config %d interface %d altsetting %d "
+ "endpoint 0x%X has an invalid bInterval %d, "
+ "changing to %d\n",
+ cfgno, inum, asnum,
+ d->bEndpointAddress, d->bInterval, n);
+ endpoint->desc.bInterval = n;
+ }
+
+ /* Some buggy low-speed devices have Bulk endpoints, which is
+ * explicitly forbidden by the USB spec. In an attempt to make
+ * them usable, we will try treating them as Interrupt endpoints.
+ */
+ if (to_usb_device(ddev)->speed == USB_SPEED_LOW &&
+ usb_endpoint_xfer_bulk(d)) {
+ dev_warn(ddev, "config %d interface %d altsetting %d "
+ "endpoint 0x%X is Bulk; changing to Interrupt\n",
+ cfgno, inum, asnum, d->bEndpointAddress);
+ endpoint->desc.bmAttributes = USB_ENDPOINT_XFER_INT;
+ endpoint->desc.bInterval = 1;
+ if (le16_to_cpu(endpoint->desc.wMaxPacketSize) > 8)
+ endpoint->desc.wMaxPacketSize = cpu_to_le16(8);
+ }
+
/* Skip over any Class Specific or Vendor Specific descriptors;
* find the next endpoint or interface descriptor */
endpoint->extra = buffer;
num_ep = USB_MAXENDPOINTS;
}
- len = sizeof(struct usb_host_endpoint) * num_ep;
- alt->endpoint = kzalloc(len, GFP_KERNEL);
- if (!alt->endpoint)
- return -ENOMEM;
+ if (num_ep > 0) { /* Can't allocate 0 bytes */
+ len = sizeof(struct usb_host_endpoint) * num_ep;
+ alt->endpoint = kzalloc(len, GFP_KERNEL);
+ if (!alt->endpoint)
+ return -ENOMEM;
+ }
/* Parse all the endpoint descriptors */
n = 0;
struct usb_descriptor_header *header;
int len, retval;
u8 inums[USB_MAXINTERFACES], nalts[USB_MAXINTERFACES];
+ unsigned iad_num = 0;
memcpy(&config->desc, buffer, USB_DT_CONFIG_SIZE);
if (config->desc.bDescriptorType != USB_DT_CONFIG ||
++n;
}
+ } else if (header->bDescriptorType ==
+ USB_DT_INTERFACE_ASSOCIATION) {
+ if (iad_num == USB_MAXIADS) {
+ dev_warn(ddev, "found more Interface "
+ "Association Descriptors "
+ "than allocated for in "
+ "configuration %d\n", cfgno);
+ } else {
+ config->intf_assoc[iad_num] =
+ (struct usb_interface_assoc_descriptor
+ *)header;
+ iad_num++;
+ }
+
} else if (header->bDescriptorType == USB_DT_DEVICE ||
header->bDescriptorType == USB_DT_CONFIG)
dev_warn(ddev, "config %d contains an unexpected "
}
-// hub-only!! ... and only in reset path, or usb_new_device()
-// (used by real hubs and virtual root hubs)
+/*
+ * Get the USB config descriptors, cache and parse'em
+ *
+ * hub-only!! ... and only in reset path, or usb_new_device()
+ * (used by real hubs and virtual root hubs)
+ *
+ * NOTE: if this is a WUSB device and is not authorized, we skip the
+ * whole thing. A non-authorized USB device has no
+ * configurations.
+ */
int usb_get_configuration(struct usb_device *dev)
{
struct device *ddev = &dev->dev;
int ncfg = dev->descriptor.bNumConfigurations;
- int result = -ENOMEM;
+ int result = 0;
unsigned int cfgno, length;
unsigned char *buffer;
unsigned char *bigbuffer;
struct usb_config_descriptor *desc;
+ cfgno = 0;
+ if (dev->authorized == 0) /* Not really an error */
+ goto out_not_authorized;
+ result = -ENOMEM;
if (ncfg > USB_MAXCONFIG) {
dev_warn(ddev, "too many configurations: %d, "
"using maximum allowed: %d\n", ncfg, USB_MAXCONFIG);
goto err2;
desc = (struct usb_config_descriptor *)buffer;
- for (cfgno = 0; cfgno < ncfg; cfgno++) {
+ result = 0;
+ for (; cfgno < ncfg; cfgno++) {
/* We grab just the first descriptor so we know how long
* the whole configuration is */
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
buffer, USB_DT_CONFIG_SIZE);
if (result < 0) {
dev_err(ddev, "unable to read config index %d "
- "descriptor/%s\n", cfgno, "start");
+ "descriptor/%s: %d\n", cfgno, "start", result);
dev_err(ddev, "chopping to %d config(s)\n", cfgno);
dev->descriptor.bNumConfigurations = cfgno;
break;
err:
kfree(buffer);
+out_not_authorized:
dev->descriptor.bNumConfigurations = cfgno;
err2:
if (result == -ENOMEM)
projects / deliverable / linux.git / blobdiff