#include <linux/uaccess.h>
#include <linux/vmalloc.h>
-#include <linux/of_platform.h>
-
#include <sysdev/fsl_soc.h>
#include <linux/fsl-diu-fb.h>
#include "edid.h"
/*
- * These parameters give default parameters
- * for video output 1024x768,
- * FIXME - change timing to proper amounts
- * hsync 31.5kHz, vsync 60Hz
+ * List of supported video modes
+ *
+ * The first entry is the default video mode
*/
-static struct fb_videomode __devinitdata fsl_diu_default_mode = {
- .refresh = 60,
- .xres = 1024,
- .yres = 768,
- .pixclock = 15385,
- .left_margin = 160,
- .right_margin = 24,
- .upper_margin = 29,
- .lower_margin = 3,
- .hsync_len = 136,
- .vsync_len = 6,
- .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED
-};
-
static struct fb_videomode __devinitdata fsl_diu_mode_db[] = {
{
.name = "1024x768-60",
static char *fb_mode = "1024x768-32@60";
static unsigned long default_bpp = 32;
-static int monitor_port;
+static enum fsl_diu_monitor_port monitor_port;
+static char *monitor_string;
#if defined(CONFIG_NOT_COHERENT_CACHE)
static u8 *coherence_data;
void *dummy_aoi_virt;
unsigned int irq;
int fb_enabled;
- int monitor_port;
+ enum fsl_diu_monitor_port monitor_port;
};
struct mfb_info {
static struct mfb_info mfb_template[] = {
{ /* AOI 0 for plane 0 */
- .index = 0,
- .type = MFB_TYPE_OUTPUT,
- .id = "Panel0",
- .registered = 0,
- .count = 0,
- .x_aoi_d = 0,
- .y_aoi_d = 0,
+ .index = 0,
+ .type = MFB_TYPE_OUTPUT,
+ .id = "Panel0",
+ .registered = 0,
+ .count = 0,
+ .x_aoi_d = 0,
+ .y_aoi_d = 0,
},
{ /* AOI 0 for plane 1 */
- .index = 1,
- .type = MFB_TYPE_OUTPUT,
- .id = "Panel1 AOI0",
- .registered = 0,
- .g_alpha = 0xff,
- .count = 0,
- .x_aoi_d = 0,
- .y_aoi_d = 0,
+ .index = 1,
+ .type = MFB_TYPE_OUTPUT,
+ .id = "Panel1 AOI0",
+ .registered = 0,
+ .g_alpha = 0xff,
+ .count = 0,
+ .x_aoi_d = 0,
+ .y_aoi_d = 0,
},
{ /* AOI 1 for plane 1 */
- .index = 2,
- .type = MFB_TYPE_OUTPUT,
- .id = "Panel1 AOI1",
- .registered = 0,
- .g_alpha = 0xff,
- .count = 0,
- .x_aoi_d = 0,
- .y_aoi_d = 480,
+ .index = 2,
+ .type = MFB_TYPE_OUTPUT,
+ .id = "Panel1 AOI1",
+ .registered = 0,
+ .g_alpha = 0xff,
+ .count = 0,
+ .x_aoi_d = 0,
+ .y_aoi_d = 480,
},
{ /* AOI 0 for plane 2 */
- .index = 3,
- .type = MFB_TYPE_OUTPUT,
- .id = "Panel2 AOI0",
- .registered = 0,
- .g_alpha = 0xff,
- .count = 0,
- .x_aoi_d = 640,
- .y_aoi_d = 0,
+ .index = 3,
+ .type = MFB_TYPE_OUTPUT,
+ .id = "Panel2 AOI0",
+ .registered = 0,
+ .g_alpha = 0xff,
+ .count = 0,
+ .x_aoi_d = 640,
+ .y_aoi_d = 0,
},
{ /* AOI 1 for plane 2 */
- .index = 4,
- .type = MFB_TYPE_OUTPUT,
- .id = "Panel2 AOI1",
- .registered = 0,
- .g_alpha = 0xff,
- .count = 0,
- .x_aoi_d = 640,
- .y_aoi_d = 480,
+ .index = 4,
+ .type = MFB_TYPE_OUTPUT,
+ .id = "Panel2 AOI1",
+ .registered = 0,
+ .g_alpha = 0xff,
+ .count = 0,
+ .x_aoi_d = 640,
+ .y_aoi_d = 480,
},
};
static struct diu_pool pool;
+/**
+ * fsl_diu_name_to_port - convert a port name to a monitor port enum
+ *
+ * Takes the name of a monitor port ("dvi", "lvds", or "dlvds") and returns
+ * the enum fsl_diu_monitor_port that corresponds to that string.
+ *
+ * For compatibility with older versions, a number ("0", "1", or "2") is also
+ * supported.
+ *
+ * If the string is unknown, DVI is assumed.
+ *
+ * If the particular port is not supported by the platform, another port
+ * (platform-specific) is chosen instead.
+ */
+static enum fsl_diu_monitor_port fsl_diu_name_to_port(const char *s)
+{
+ enum fsl_diu_monitor_port port = FSL_DIU_PORT_DVI;
+ unsigned long val;
+
+ if (s) {
+ if (!strict_strtoul(s, 10, &val) && (val <= 2))
+ port = (enum fsl_diu_monitor_port) val;
+ else if (strncmp(s, "lvds", 4) == 0)
+ port = FSL_DIU_PORT_LVDS;
+ else if (strncmp(s, "dlvds", 5) == 0)
+ port = FSL_DIU_PORT_DLVDS;
+ }
+
+ return diu_ops.valid_monitor_port(port);
+}
+
/**
* fsl_diu_alloc - allocate memory for the DIU
* @size: number of bytes to allocate
{
void *virt;
- pr_debug("size=%zu\n", size);
-
virt = alloc_pages_exact(size, GFP_DMA | __GFP_ZERO);
- if (virt) {
+ if (virt)
*phys = virt_to_phys(virt);
- pr_debug("virt=%p phys=%llx\n", virt,
- (unsigned long long)*phys);
- }
return virt;
}
*/
static void fsl_diu_free(void *virt, size_t size)
{
- pr_debug("virt=%p size=%zu\n", virt, size);
-
if (virt && size)
free_pages_exact(virt, size);
}
struct fsl_diu_data *machine_data = mfbi->parent;
int res = 0;
- pr_debug("enable_panel index %d\n", mfbi->index);
if (mfbi->type != MFB_TYPE_OFF) {
switch (mfbi->index) {
case 0: /* plane 0 */
static int fsl_diu_check_var(struct fb_var_screeninfo *var,
struct fb_info *info)
{
- pr_debug("check_var xres: %d\n", var->xres);
- pr_debug("check_var yres: %d\n", var->yres);
-
if (var->xres_virtual < var->xres)
var->xres_virtual = var->xres;
if (var->yres_virtual < var->yres)
/* Prep for DIU init - gamma table, cursor table */
for (i = 0; i <= 2; i++)
- for (j = 0; j <= 255; j++)
- *gamma_table_base++ = j;
+ for (j = 0; j <= 255; j++)
+ *gamma_table_base++ = j;
diu_ops.set_gamma_table(machine_data->monitor_port, pool.gamma.vaddr);
- pr_debug("update-lcdc: HW - %p\n Disabling DIU\n", hw);
disable_lcdc(info);
/* Program DIU registers */
out_be32(&hw->bgnd_wb, 0); /* BGND_WB */
out_be32(&hw->disp_size, (var->yres << 16 | var->xres));
/* DISP SIZE */
- pr_debug("DIU xres: %d\n", var->xres);
- pr_debug("DIU yres: %d\n", var->yres);
-
out_be32(&hw->wb_size, 0); /* WB SIZE */
out_be32(&hw->wb_mem_addr, 0); /* WB MEM ADDR */
out_be32(&hw->vsyn_para, temp);
- pr_debug("DIU right_margin - %d\n", var->right_margin);
- pr_debug("DIU left_margin - %d\n", var->left_margin);
- pr_debug("DIU hsync_len - %d\n", var->hsync_len);
- pr_debug("DIU upper_margin - %d\n", var->upper_margin);
- pr_debug("DIU lower_margin - %d\n", var->lower_margin);
- pr_debug("DIU vsync_len - %d\n", var->vsync_len);
- pr_debug("DIU HSYNC - 0x%08x\n", hw->hsyn_para);
- pr_debug("DIU VSYNC - 0x%08x\n", hw->vsyn_para);
-
diu_ops.set_pixel_clock(var->pixclock);
out_be32(&hw->syn_pol, 0); /* SYNC SIGNALS POLARITY */
phys_addr_t phys;
u32 smem_len = info->fix.line_length * info->var.yres_virtual;
- pr_debug("info->var.xres_virtual = %d\n", info->var.xres_virtual);
- pr_debug("info->var.yres_virtual = %d\n", info->var.yres_virtual);
- pr_debug("info->fix.line_length = %d\n", info->fix.line_length);
- pr_debug("MAP_VIDEO_MEMORY: smem_len = %u\n", smem_len);
-
info->screen_base = fsl_diu_alloc(smem_len, &phys);
if (info->screen_base == NULL) {
- printk(KERN_ERR "Unable to allocate fb memory\n");
+ dev_err(info->dev, "unable to allocate fb memory\n");
return -ENOMEM;
}
mutex_lock(&info->mm_lock);
mutex_unlock(&info->mm_lock);
info->screen_size = info->fix.smem_len;
- pr_debug("Allocated fb @ paddr=0x%08lx, size=%d.\n",
- info->fix.smem_start, info->fix.smem_len);
- pr_debug("screen base %p\n", info->screen_base);
-
return 0;
}
if (len != info->fix.smem_len) {
if (info->fix.smem_start)
unmap_video_memory(info);
- pr_debug("SET PAR: smem_len = %d\n", info->fix.smem_len);
/* Memory allocation for framebuffer */
if (map_video_memory(info)) {
- printk(KERN_ERR "Unable to allocate fb memory 1\n");
+ dev_err(info->dev, "unable to allocate fb memory 1\n");
return -ENOMEM;
}
}
- ad->pix_fmt =
- diu_ops.get_pixel_format(var->bits_per_pixel,
- machine_data->monitor_port);
+ ad->pix_fmt = diu_ops.get_pixel_format(machine_data->monitor_port,
+ var->bits_per_pixel);
ad->addr = cpu_to_le32(info->fix.smem_start);
ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) |
var->xres_virtual) | mfbi->g_alpha;
static inline __u32 CNVT_TOHW(__u32 val, __u32 width)
{
- return ((val<<width) + 0x7FFF - val)>>16;
+ return ((val << width) + 0x7FFF - val) >> 16;
}
/*
* pseudo_palette in struct fb_info. For pseudocolor mode we have a limited
* color palette.
*/
-static int fsl_diu_setcolreg(unsigned regno, unsigned red, unsigned green,
- unsigned blue, unsigned transp, struct fb_info *info)
+static int fsl_diu_setcolreg(unsigned int regno, unsigned int red,
+ unsigned int green, unsigned int blue,
+ unsigned int transp, struct fb_info *info)
{
int ret = 1;
ret = 0;
}
break;
- case FB_VISUAL_STATIC_PSEUDOCOLOR:
- case FB_VISUAL_PSEUDOCOLOR:
- break;
}
return ret;
if (copy_from_user(&pix_fmt, buf, sizeof(pix_fmt)))
return -EFAULT;
ad->pix_fmt = pix_fmt;
- pr_debug("Set pixel format to 0x%08x\n", ad->pix_fmt);
break;
case MFB_GET_PIXFMT:
pix_fmt = ad->pix_fmt;
if (copy_to_user(buf, &pix_fmt, sizeof(pix_fmt)))
return -EFAULT;
- pr_debug("get pixel format 0x%08x\n", ad->pix_fmt);
break;
case MFB_SET_AOID:
if (copy_from_user(&aoi_d, buf, sizeof(aoi_d)))
return -EFAULT;
mfbi->x_aoi_d = aoi_d.x_aoi_d;
mfbi->y_aoi_d = aoi_d.y_aoi_d;
- pr_debug("set AOI display offset of index %d to (%d,%d)\n",
- mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d);
fsl_diu_check_var(&info->var, info);
fsl_diu_set_aoi(info);
break;
aoi_d.y_aoi_d = mfbi->y_aoi_d;
if (copy_to_user(buf, &aoi_d, sizeof(aoi_d)))
return -EFAULT;
- pr_debug("get AOI display offset of index %d (%d,%d)\n",
- mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d);
break;
case MFB_GET_ALPHA:
global_alpha = mfbi->g_alpha;
if (copy_to_user(buf, &global_alpha, sizeof(global_alpha)))
return -EFAULT;
- pr_debug("get global alpha of index %d\n", mfbi->index);
break;
case MFB_SET_ALPHA:
/* set panel information */
ad->src_size_g_alpha = (ad->src_size_g_alpha & (~0xff)) |
(global_alpha & 0xff);
mfbi->g_alpha = global_alpha;
- pr_debug("set global alpha for index %d\n", mfbi->index);
break;
case MFB_SET_CHROMA_KEY:
/* set panel winformation */
ad->ckmin_g = ck.green_min;
ad->ckmin_b = ck.blue_min;
}
- pr_debug("set chroma key\n");
break;
case FBIOGET_GWINFO:
if (mfbi->type == MFB_TYPE_OFF)
if (copy_to_user(buf, ad, sizeof(*ad)))
return -EFAULT;
break;
- case FBIOGET_HWCINFO:
- pr_debug("FBIOGET_HWCINFO:0x%08x\n", FBIOGET_HWCINFO);
- break;
- case FBIOPUT_MODEINFO:
- pr_debug("FBIOPUT_MODEINFO:0x%08x\n", FBIOPUT_MODEINFO);
- break;
- case FBIOGET_DISPINFO:
- pr_debug("FBIOGET_DISPINFO:0x%08x\n", FBIOGET_DISPINFO);
- break;
default:
- printk(KERN_ERR "Unknown ioctl command (0x%08X)\n", cmd);
+ dev_err(info->dev, "unknown ioctl command (0x%08X)\n", cmd);
return -ENOIOCTLCMD;
}
spin_lock(&diu_lock);
mfbi->count++;
if (mfbi->count == 1) {
- pr_debug("open plane index %d\n", mfbi->index);
fsl_diu_check_var(&info->var, info);
res = fsl_diu_set_par(info);
if (res < 0)
spin_lock(&diu_lock);
mfbi->count--;
if (mfbi->count == 0) {
- pr_debug("release plane index %d\n", mfbi->index);
res = fsl_diu_disable_panel(info);
if (res < 0)
mfbi->count++;
} else {
aoi_mode = init_aoi_mode;
}
- pr_debug("mode used = %s\n", aoi_mode);
- rc = fb_find_mode(&info->var, info, aoi_mode, db, dbsize,
- &fsl_diu_default_mode, default_bpp);
- switch (rc) {
- case 1:
- pr_debug("using mode specified in @mode\n");
- break;
- case 2:
- pr_debug("using mode specified in @mode "
- "with ignored refresh rate\n");
- break;
- case 3:
- pr_debug("using mode default mode\n");
- break;
- case 4:
- pr_debug("using mode from list\n");
- break;
- default:
- pr_debug("rc = %d\n", rc);
- pr_debug("failed to find mode\n");
+ rc = fb_find_mode(&info->var, info, aoi_mode, db, dbsize, NULL,
+ default_bpp);
+ if (!rc) {
/*
* For plane 0 we continue and look into
* driver's internal modedb.
has_default_mode = 0;
else
return -EINVAL;
- break;
}
if (!has_default_mode) {
rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db,
- ARRAY_SIZE(fsl_diu_mode_db),
- &fsl_diu_default_mode,
- default_bpp);
- if (rc > 0 && rc < 5)
+ ARRAY_SIZE(fsl_diu_mode_db), NULL, default_bpp);
+ if (rc)
has_default_mode = 1;
}
fb_videomode_to_var(&info->var, modedb);
}
- pr_debug("xres_virtual %d\n", info->var.xres_virtual);
- pr_debug("bits_per_pixel %d\n", info->var.bits_per_pixel);
-
- pr_debug("info->var.yres_virtual = %d\n", info->var.yres_virtual);
- pr_debug("info->fix.line_length = %d\n", info->fix.line_length);
-
if (mfbi->type == MFB_TYPE_OFF)
mfbi->blank = FB_BLANK_NORMAL;
else
mfbi->blank = FB_BLANK_UNBLANK;
if (fsl_diu_check_var(&info->var, info)) {
- printk(KERN_ERR "fb_check_var failed");
+ dev_err(info->dev, "fsl_diu_check_var failed\n");
fb_dealloc_cmap(&info->cmap);
return -EINVAL;
}
if (register_framebuffer(info) < 0) {
- printk(KERN_ERR "register_framebuffer failed");
+ dev_err(info->dev, "register_framebuffer failed\n");
unmap_video_memory(info);
fb_dealloc_cmap(&info->cmap);
return -EINVAL;
}
mfbi->registered = 1;
- printk(KERN_INFO "fb%d: %s fb device registered successfully.\n",
- info->node, info->fix.id);
+ dev_info(info->dev, "%s registered successfully\n", mfbi->id);
return 0;
}
/* This is the workaround for underrun */
if (status & INT_UNDRUN) {
out_be32(&hw->diu_mode, 0);
- pr_debug("Err: DIU occurs underrun!\n");
udelay(1);
out_be32(&hw->diu_mode, 1);
}
#if defined(CONFIG_NOT_COHERENT_CACHE)
else if (status & INT_VSYNC) {
unsigned int i;
+
for (i = 0; i < coherence_data_size;
i += d_cache_line_size)
__asm__ __volatile__ (
status = in_be32(&hw->int_status);
ret = request_irq(irq, fsl_diu_isr, 0, "diu", NULL);
- if (ret)
- pr_info("Request diu IRQ failed.\n");
- else {
+ if (!ret) {
ints = INT_PARERR | INT_LS_BF_VS;
#if !defined(CONFIG_NOT_COHERENT_CACHE)
ints |= INT_VSYNC;
#endif
+
if (dr.mode == MFB_MODE2 || dr.mode == MFB_MODE3)
ints |= INT_VSYNC_WB;
status = in_be32(&hw->int_status);
out_be32(&hw->int_mask, ints);
}
+
return ret;
}
buf->paddr = (u32)buf->paddr + offset;
} else
buf->offset = 0;
+
return 0;
}
static void free_buf(struct device *dev, struct diu_addr *buf, u32 size,
u32 bytes_align)
{
- dma_free_coherent(dev, size + bytes_align,
- buf->vaddr, (buf->paddr - buf->offset));
- return;
+ dma_free_coherent(dev, size + bytes_align, buf->vaddr,
+ buf->paddr - buf->offset);
}
static ssize_t store_monitor(struct device *device,
struct device_attribute *attr, const char *buf, size_t count)
{
- int old_monitor_port;
- unsigned long val;
+ enum fsl_diu_monitor_port old_monitor_port;
struct fsl_diu_data *machine_data =
container_of(attr, struct fsl_diu_data, dev_attr);
- if (strict_strtoul(buf, 10, &val))
- return 0;
-
old_monitor_port = machine_data->monitor_port;
- machine_data->monitor_port = diu_ops.set_sysfs_monitor_port(val);
+ machine_data->monitor_port = fsl_diu_name_to_port(buf);
if (old_monitor_port != machine_data->monitor_port) {
/* All AOIs need adjust pixel format
{
struct fsl_diu_data *machine_data =
container_of(attr, struct fsl_diu_data, dev_attr);
- return diu_ops.show_monitor_port(machine_data->monitor_port, buf);
+
+ switch (machine_data->monitor_port) {
+ case FSL_DIU_PORT_DVI:
+ return sprintf(buf, "DVI\n");
+ case FSL_DIU_PORT_LVDS:
+ return sprintf(buf, "Single-link LVDS\n");
+ case FSL_DIU_PORT_DLVDS:
+ return sprintf(buf, "Dual-link LVDS\n");
+ }
+
+ return 0;
}
-static int __devinit fsl_diu_probe(struct platform_device *ofdev)
+static int __devinit fsl_diu_probe(struct platform_device *pdev)
{
- struct device_node *np = ofdev->dev.of_node;
+ struct device_node *np = pdev->dev.of_node;
struct mfb_info *mfbi;
- phys_addr_t dummy_ad_addr;
+ phys_addr_t dummy_ad_addr = 0;
int ret, i, error = 0;
- struct resource res;
struct fsl_diu_data *machine_data;
int diu_mode;
for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++) {
machine_data->fsl_diu_info[i] =
- framebuffer_alloc(sizeof(struct mfb_info), &ofdev->dev);
+ framebuffer_alloc(sizeof(struct mfb_info), &pdev->dev);
if (!machine_data->fsl_diu_info[i]) {
- dev_err(&ofdev->dev, "cannot allocate memory\n");
+ dev_err(&pdev->dev, "cannot allocate memory\n");
ret = -ENOMEM;
goto error2;
}
}
}
- ret = of_address_to_resource(np, 0, &res);
- if (ret) {
- dev_err(&ofdev->dev, "could not obtain DIU address\n");
- goto error;
- }
- if (!res.start) {
- dev_err(&ofdev->dev, "invalid DIU address\n");
- goto error;
- }
- dev_dbg(&ofdev->dev, "%s, res.start: 0x%08x\n", __func__, res.start);
-
- dr.diu_reg = ioremap(res.start, sizeof(struct diu));
+ dr.diu_reg = of_iomap(np, 0);
if (!dr.diu_reg) {
- dev_err(&ofdev->dev, "Err: can't map DIU registers!\n");
+ dev_err(&pdev->dev, "cannot map DIU registers\n");
ret = -EFAULT;
goto error2;
}
machine_data->irq = irq_of_parse_and_map(np, 0);
if (!machine_data->irq) {
- dev_err(&ofdev->dev, "could not get DIU IRQ\n");
+ dev_err(&pdev->dev, "could not get DIU IRQ\n");
ret = -EINVAL;
goto error;
}
machine_data->monitor_port = monitor_port;
/* Area descriptor memory pool aligns to 64-bit boundary */
- if (allocate_buf(&ofdev->dev, &pool.ad,
+ if (allocate_buf(&pdev->dev, &pool.ad,
sizeof(struct diu_ad) * FSL_AOI_NUM, 8))
return -ENOMEM;
/* Get memory for Gamma Table - 32-byte aligned memory */
- if (allocate_buf(&ofdev->dev, &pool.gamma, 768, 32)) {
+ if (allocate_buf(&pdev->dev, &pool.gamma, 768, 32)) {
ret = -ENOMEM;
goto error;
}
/* For performance, cursor bitmap buffer aligns to 32-byte boundary */
- if (allocate_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
+ if (allocate_buf(&pdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
32)) {
ret = -ENOMEM;
goto error;
mfbi->ad->paddr = pool.ad.paddr + i * sizeof(struct diu_ad);
ret = install_fb(machine_data->fsl_diu_info[i]);
if (ret) {
- dev_err(&ofdev->dev,
- "Failed to register framebuffer %d\n",
- i);
+ dev_err(&pdev->dev, "could not register fb %d\n", i);
goto error;
}
}
if (request_irq_local(machine_data->irq)) {
- dev_err(machine_data->fsl_diu_info[0]->dev,
- "could not request irq for diu.");
+ dev_err(&pdev->dev, "could not claim irq\n");
goto error;
}
error = device_create_file(machine_data->fsl_diu_info[0]->dev,
&machine_data->dev_attr);
if (error) {
- dev_err(machine_data->fsl_diu_info[0]->dev,
- "could not create sysfs %s file\n",
+ dev_err(&pdev->dev, "could not create sysfs file %s\n",
machine_data->dev_attr.attr.name);
}
- dev_set_drvdata(&ofdev->dev, machine_data);
+ dev_set_drvdata(&pdev->dev, machine_data);
return 0;
error:
i > 0; i--)
uninstall_fb(machine_data->fsl_diu_info[i - 1]);
if (pool.ad.vaddr)
- free_buf(&ofdev->dev, &pool.ad,
+ free_buf(&pdev->dev, &pool.ad,
sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
if (pool.gamma.vaddr)
- free_buf(&ofdev->dev, &pool.gamma, 768, 32);
+ free_buf(&pdev->dev, &pool.gamma, 768, 32);
if (pool.cursor.vaddr)
- free_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
+ free_buf(&pdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
32);
if (machine_data->dummy_aoi_virt)
fsl_diu_free(machine_data->dummy_aoi_virt, 64);
return ret;
}
-
-static int fsl_diu_remove(struct platform_device *ofdev)
+static int fsl_diu_remove(struct platform_device *pdev)
{
struct fsl_diu_data *machine_data;
int i;
- machine_data = dev_get_drvdata(&ofdev->dev);
+ machine_data = dev_get_drvdata(&pdev->dev);
disable_lcdc(machine_data->fsl_diu_info[0]);
free_irq_local(machine_data->irq);
for (i = ARRAY_SIZE(machine_data->fsl_diu_info); i > 0; i--)
uninstall_fb(machine_data->fsl_diu_info[i - 1]);
if (pool.ad.vaddr)
- free_buf(&ofdev->dev, &pool.ad,
+ free_buf(&pdev->dev, &pool.ad,
sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
if (pool.gamma.vaddr)
- free_buf(&ofdev->dev, &pool.gamma, 768, 32);
+ free_buf(&pdev->dev, &pool.gamma, 768, 32);
if (pool.cursor.vaddr)
- free_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
- 32);
+ free_buf(&pdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2, 32);
if (machine_data->dummy_aoi_virt)
fsl_diu_free(machine_data->dummy_aoi_virt, 64);
iounmap(dr.diu_reg);
if (!*opt)
continue;
if (!strncmp(opt, "monitor=", 8)) {
- if (!strict_strtoul(opt + 8, 10, &val) && (val <= 2))
- monitor_port = val;
+ monitor_port = fsl_diu_name_to_port(opt + 8);
} else if (!strncmp(opt, "bpp=", 4)) {
if (!strict_strtoul(opt + 4, 10, &val))
default_bpp = val;
if (fb_get_options("fslfb", &option))
return -ENODEV;
fsl_diu_setup(option);
+#else
+ monitor_port = fsl_diu_name_to_port(monitor_string);
#endif
- printk(KERN_INFO "Freescale DIU driver\n");
+ pr_info("Freescale Display Interface Unit (DIU) framebuffer driver\n");
#ifdef CONFIG_NOT_COHERENT_CACHE
np = of_find_node_by_type(NULL, "cpu");
if (!np) {
- printk(KERN_ERR "Err: can't find device node 'cpu'\n");
+ pr_err("fsl-diu-fb: can't find 'cpu' device node\n");
return -ENODEV;
}
prop = of_get_property(np, "d-cache-size", NULL);
if (prop == NULL) {
+ pr_err("fsl-diu-fb: missing 'd-cache-size' property' "
+ "in 'cpu' node\n");
of_node_put(np);
return -ENODEV;
}
- /* Freescale PLRU requires 13/8 times the cache size to do a proper
- displacement flush
+ /*
+ * Freescale PLRU requires 13/8 times the cache size to do a proper
+ * displacement flush
*/
- coherence_data_size = *prop * 13;
+ coherence_data_size = be32_to_cpup(prop) * 13;
coherence_data_size /= 8;
prop = of_get_property(np, "d-cache-line-size", NULL);
if (prop == NULL) {
+ pr_err("fsl-diu-fb: missing 'd-cache-line-size' property' "
+ "in 'cpu' node\n");
of_node_put(np);
return -ENODEV;
}
- d_cache_line_size = *prop;
+ d_cache_line_size = be32_to_cpup(prop);
of_node_put(np);
coherence_data = vmalloc(coherence_data_size);
if (!coherence_data)
return -ENOMEM;
#endif
+
ret = platform_driver_register(&fsl_diu_driver);
if (ret) {
- printk(KERN_ERR
- "fsl-diu: failed to register platform driver\n");
+ pr_err("fsl-diu-fb: failed to register platform driver\n");
#if defined(CONFIG_NOT_COHERENT_CACHE)
vfree(coherence_data);
#endif
MODULE_PARM_DESC(mode,
"Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
module_param_named(bpp, default_bpp, ulong, 0);
-MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified mode");
-module_param_named(monitor, monitor_port, int, 0);
-MODULE_PARM_DESC(monitor,
- "Specify the monitor port (0, 1 or 2) if supported by the platform");
+MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified in 'mode'");
+module_param_named(monitor, monitor_string, charp, 0);
+MODULE_PARM_DESC(monitor, "Specify the monitor port "
+ "(\"dvi\", \"lvds\", or \"dlvds\") if supported by the platform");
projects / deliverable / linux.git / blobdiff