+2013-05-06 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * config/tc-mips.c (limited_pcrel_reloc_p): New function.
+ (mips_fix_adjustable): Adjust pc-relative check to use
+ limited_pc_reloc_p.
+
+2013-05-02 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * config/tc-mips.c (mips_pseudo_table): Add stabd and stabs entries.
+ (s_mips_stab): Do not restrict to stabn only.
+
+2013-05-02 Nick Clifton <nickc@redhat.com>
+
+ * config/tc-msp430.c: Add support for the MSP430X architecture.
+ Add code to insert a NOP instruction after any instruction that
+ might change the interrupt state.
+ Add support for the LARGE memory model.
+ Add code to initialise the .MSP430.attributes section.
+ * config/tc-msp430.h: Add support for the MSP430X architecture.
+ * doc/c-msp430.texi: Document the new -mL and -mN command line
+ options.
+ * NEWS: Mention support for the MSP430X architecture.
+
+2013-05-01 Maciej W. Rozycki <macro@codesourcery.com>
+
+ * configure.tgt: Replace alpha*-*-linuxecoff* pattern with
+ alpha*-*-linux*ecoff*.
+
+2013-04-30 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
+
+ * config/tc-mips.c (mips_ip): Add sizelo.
+ For "+C", "+G", and "+H", set sizelo and compare against it.
+
+2013-04-29 Nick Clifton <nickc@redhat.com>
+
+ * as.c (Options): Add -gdwarf-sections.
+ (parse_args): Likewise.
+ * as.h (flag_dwarf_sections): Declare.
+ * dwarf2dbg.c (emit_fixed_inc_line_addr): Skip section changes.
+ (process_entries): When -gdwarf-sections is enabled generate
+ fragmentary .debug_line sections.
+ (out_debug_line): Set the section for the .debug_line section end
+ symbol.
+ * doc/as.texinfo: Document -gdwarf-sections.
+ * NEWS: Mention -gdwarf-sections.
+
+2013-04-26 Christian Groessler <chris@groessler.org>
+
+ * config/tc-z8k.c (md_parse_option): Set z8k_target_from_cmdline
+ according to the target parameter. Don't call s_segm since s_segm
+ calls bfd_set_arch_mach using stdoutput, but stdoutput isn't
+ initialized yet.
+ (md_begin): Call s_segm according to target parameter from command
+ line.
+
+2013-04-25 Alan Modra <amodra@gmail.com>
+
+ * configure.in: Allow little-endian linux.
+ * configure: Regenerate.
+
+2013-04-24 Sandra Loosemore <sandra@codesourcery.com>
+
+ * config/tc-nios2.c (nios2_control_register_arg_p): Rename
+ "fstatus" control register to "eccinj".
+
+2013-04-19 Kai Tietz <ktietz@redhat.com>
+
+ * configure.tgt (i386-*-cygwin): Handle x86_64 cygwin.
+
+2013-04-15 Julian Brown <julian@codesourcery.com>
+
+ * expr.c (add_to_result, subtract_from_result): Make global.
+ * expr.h (add_to_result, subtract_from_result): Add prototypes.
+ * config/tc-sh.c (sh_optimize_expr): Use add_to_result,
+ subtract_from_result to handle extra bit of precision for .sleb128
+ directive operands.
+
+2013-04-10 Julian Brown <julian@codesourcery.com>
+
+ * read.c (convert_to_bignum): Add sign parameter. Use it
+ instead of X_unsigned to determine sign of resulting bignum.
+ (emit_expr): Pass extra argument to convert_to_bignum.
+ (emit_leb128_expr): Use X_extrabit instead of X_unsigned. Pass
+ X_extrabit to convert_to_bignum.
+ (parse_bitfield_cons): Set X_extrabit.
+ * expr.c (make_expr_symbol, expr_build_uconstant, operand):
+ Initialise X_extrabit field as appropriate.
+ (add_to_result): New.
+ (subtract_from_result): New.
+ (expr): Use above.
+ * expr.h (expressionS): Add X_extrabit field.
+
+2013-04-10 Jan Beulich <jbeulich@suse.com>
+
+ * gas/config/tc-arm.c (encode_arm_addr_mode_3): Only reject base
+ register being PC when is_t or writeback, and use distinct
+ diagnostic for the latter case.
+
+2013-04-10 Jan Beulich <jbeulich@suse.com>
+
+ * gas/config/tc-arm.c (parse_operands): Re-write
+ po_barrier_or_imm().
+ (do_barrier): Remove bogus constraint().
+ (do_t_barrier): Remove.
+
+2013-04-09 Joerg Wunsch <joerg.wunsch@atmel.com>
+
+ * gas/config/tc-avr.c (mcu_types): Add ATmega64RFR2,
+ ATmega644RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega256RFR2,
+ ATmega2564RFR2
+ * gas/doc/c-avr.texi (-mmcu documentation): Likewise.
+
+2013-04-09 Jan Beulich <jbeulich@suse.com>
+
+ * gas/config/tc-arm.c (do_vmrs): Accept all control registers.
+ Use local variable Rt in more places.
+ (do_vmsr): Accept all control registers.
+
+2013-04-09 Jan Beulich <jbeulich@suse.com>
+
+ * gas/config/tc-arm.c (do_neon_mov): Fake an instruction suffix
+ if there was none specified for moves between scalar and core
+ register.
+
+2013-04-09 Jan Beulich <jbeulich@suse.com>
+
+ * gas/config/tc-arm.c (do_neon_ldx_stx): Reject VSTn in the
+ NEON_ALL_LANES case.
+
+2013-04-08 Jan Beulich <jbeulich@suse.com>
+
+ * gas/config/tc-arm.c (do_neon_ldr_str): Correct disgnostics for
+ PC-relative VSTR.
+
+2013-04-08 Jan Beulich <jbeulich@suse.com>
+
+ * gas/config/tc-arm.c (reg_names): Convert duplicate SP_fiq
+ entry to sp_fiq.
+
+2013-04-03 Alan Modra <amodra@gmail.com>
+
+ * doc/as.texinfo: Add support to generate man options for h8300.
+ * doc/c-h8300.texi: Likewise.
+
+2013-03-28 Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
+
+ * config/tc-arm.c (arm_cpus): Add support for Cortex-A53 and
+ Cortex-A57.
+
+2013-03-27 Alexis Deruelle <alexis.deruelle@gmail.com>
+
+ PR binutils/15068
+ * config/tc-tic6x.c (tic6x_try_encode): Add use of bitfields array.
+
+2013-03-26 Nick Clifton <nickc@redhat.com>
+
+ PR gas/15295
+ * listing.c (rebuffer_line): Rewrite to avoid seeking back to the
+ start of the file each time.
+
+ PR gas/15178
+ * config/tc-sparc.h (ELF_TARGET_FORMAT): Set to elf32-sparc for
+ FreeBSD targets.
+
+2013-03-26 Douglas B Rupp <rupp@gnat.com>
+
+ * config/tc-ia64.c (emit_one_bundle): Move last_slot adjustment
+ after fixup.
+
+2013-03-21 Will Newton <will.newton@linaro.org>
+
+ * config/tc-arm.c (encode_thumb32_addr_mode): Emit an error for all
+ pc-relative str instructions in Thumb mode.
+
+2013-03-21 Michael Schewe <michael.schewe@gmx.net>
+
+ * config/tc-h8300.c (do_a_fix_imm): Add relaxation of mov
+ @(disp:32,ERx) to mov @(disp:16,ERx) insns by new reloc
+ R_H8_DISP32A16.
+ * config/tc-h8300.h: Remove duplicated defines.
+
+2013-03-21 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
+
+ PR gas/15282
+ * tc-avr.c (mcu_has_3_byte_pc): New function.
+ (tc_cfi_frame_initial_instructions): Call it to find return
+ address size.
+
+2013-03-20 Alexis Deruelle <alexis.deruelle@gmail.com>
+
+ PR gas/15095
+ * config/tc-tic6x.c (tic6x_try_encode): Handle
+ tic6x_coding_dreg_(msb|lsb) field coding types and use it to
+ encode register pair numbers when required.
+
2013-03-15 Will Newton <will.newton@linaro.org>
* config/tc-arm.c (do_neon_ldr_str): Fix error check for PC register