-2011-11-16 Maciej W. Rozycki <macro@codesourcery.com>
+2013-01-08 Yufeng Zhang <yufeng.zhang@arm.com>
- * config/tc-mips.c (macro_build_jalr): Reverse a negative
- conditional.
- (mips_ip): Likewise.
+ * config/tc-aarch64.c (parse_operands): Change to compare the result
+ of function call 'parse_sys_reg' with 'PARSE_FAIL' instead of 'FALSE'.
-2011-11-16 Catherine Moore <clm@codesourcery.com>
- Maciej W. Rozycki <macro@codesourcery.com>
+2013-01-07 Nick Clifton <nickc@redhat.com>
- * config/tc-mips.c (mips_cpu_info_table): Add "m14ke" and
- "m14kec".
- * doc/c-mips.texi (MIPS architecture options): Add "m14ke" and
- "m14kec" to the list of -march options.
+ PR gas/14887
+ * config/tc-arm.c (skip_past_char): Skip whitespace before the
+ anticipated character.
+ * config/tc-arm.c (parse_address_main): Delete skip of whitespace
+ here as it is no longer needed.
-2011-11-15 Maciej W. Rozycki <macro@codesourcery.com>
+2013-01-06 Andreas Schwab <schwab@linux-m68k.org>
- * write.c (dump_section_relocs): Don't convert PC-relative relocs
- that have an in-place addend narrower than the addresses used.
+ * doc/c-mips.texi (MIPS Opts): Fix use of @itemx.
+ * doc/c-score.texi (SCORE-Opts): Likewise.
+ * doc/c-tic54x.texi (TIC54X-Directives): Likewise.
-2011-11-14 Maciej W. Rozycki <macro@codesourcery.com>
+2013-01-04 Juergen Urban <JuergenUrban@gmx.de>
- * config/tc-mips.c (can_swap_branch_p): Exclude microMIPS
- variant frags too.
+ * config/tc-mips.c: Add support for MIPS r5900.
+ Add M_LQ_AB and M_SQ_AB to support large values for instructions
+ lq and sq.
+ (can_swap_branch_p, get_append_method): Detect some conditional
+ short loops to fix a bug on the r5900 by NOP in the branch delay
+ slot.
+ (M_MUL): Support 3 operands in multu on r5900.
+ (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
+ (s_mipsset): Force 32 bit floating point on r5900.
+ (mips_ip): Check parameter range of instructions mfps and mtps on
+ r5900.
+ * configure.in: Detect CPU type when target string contains r5900
+ (e.g. mips64r5900el-linux-gnu).
-2011-11-07 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
+2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
- * config/tc-arm.c (arm_cpus): Add cortex-a7 entry.
- * doc/c-arm.texi (ARM Options): Add cortex-a7 to list of accepted
- CPUs.
+ * as.c (parse_args): Update copyright year to 2013.
-2011-11-04 DJ Delorie <dj@redhat.com>
+2013-01-02 Yufeng Zhang <yufeng.zhang@arm.com>
- * doc/c-rl78.texi (RL78-Float): Remove unused menu entry.
+ * config/tc-aarch64.c (aarch64_cpus): Add entries for "cortex-a53"
+ and "cortex57".
-2011-11-02 DJ Delorie <dj@redhat.com>
+2013-01-02 Nick Clifton <nickc@redhat.com>
- * config/tc-rl78.c (tc_gen_reloc): Remove unused variable.
+ PR gas/14987
+ * config/tc-arm.c (parse_address_main): Skip whitespace before a
+ closing bracket.
-2011-11-02 Nick Clifton <nickc@redhat.com>
-
- * config/tc-arm.c (md_begin): Remove ARM_PLT32 reloc associated
- with the (PLT) instruction suffix when operating in eabi mode.
- * doc/c-arm.texi (ARM_Relocations): Extend description of (PLT)
- suffix.
-
-2011-11-01 DJ Delorie <dj@redhat.com>
-
- * Makefile.am (TARGET_CPU_CFILES): Add tc-rl78.c.
- (TARGET_CPU_HFILES): Add rc-rl78.h.
- (EXTRA_DIST): Add rl78-parse.c and rl78-parse.y.
- (rl78-parse.c, rl78-parse.h, rl78-parse.o, rl78-defs.h): New rules.
- * Makefile.in: Regenerate.
- * configure.in: Add rl78 case.
- * configure: Regenerate.
- * configure.tgt: Add rl78 case.
- * config/rl78-defs.h: New file.
- * config/rl78-parse.y: New file.
- * config/tc-rl78.c: New file.
- * config/tc-rl78.h: New file.
- * NEWS: Add Renesas RL78.
-
- * doc/Makefile.am (c-rl78.texi): New.
- * doc/Makefile.in: Likewise.
- * doc/all.texi: Enable it.
- * doc/as.texi: Add it.
- * doc/c-rl78.texi: New file.
-
-2011-10-28 Walter Lee <walt@tilera.com>
-
- * NEWS: Fix TILEPro capitalization.
- * config/tc-tilegx.c (emit_tilegx_instruction) Handle
- relocations of aliases.
- * config/tc-tilepro.c: (emit_tilepro_instruction) Likewise.
-
-2011-10-28 Nick Clifton <nickc@redhat.com>
-
- * po/ja.po: New Japanese translation.
- * configure.in (ALL_LINGUAS): Add ja.
- * configure: Regenerate.
-
-2011-10-26 Joern Rennecke <joern.rennecke@embecosm.com>
-
- * doc/as.texinfo [EPIPHANY]: Include c-epiphany.texi to avoid
- duplication.
-
-2011-10-25 Mike Frysinger <vapier@gentoo.org>
-
- * config/rx-defs.h (rx_error): Add const to first arg.
- * config/rx-parse.y (rx_error): Likewise.
-
-2011-10-25 Nick Clifton <nickc@redhat.com>
-
- * config/tc-ns32k.c (md_begin): Rename local variable 'stat' to
- 'status'.
-
-2011-10-25 Joern Rennecke <joern.rennecke@embecosm.com>
-
- * NEWS: Mention addition of Adapteva Epiphany support.
- * config/tc-epiphany.c: New file.
- * config/tc-epiphany.h: New file.
- * Makefile.am (TARGET_CPU_CFILES): Add config/tc-epiphany.c .
- (TARGET_CPU_HFILES): Add config/tc-epiphany.h .
- * configure.in: Also set using_cgen for epiphany.
- * configure.tgt: Handle epiphany.
- * doc/Makefile.am (CPU_DOCS): Add c-epiphany.texi .
- * doc/all.texi: Set EPIPHANY.
- * doc/as.texinfo: Add EPIPHANY-specific text.
- * doc/c-epiphany.texi: New file.
- * po/gas.pot: Regenerate.
- * Makefile.in: Regenerate.
- * configure: Regenerate.
- * doc/Makefile.in: Regenerate.
- * po/POTFILES.in: Regenerate.
-
-2011-10-24 Maciej W. Rozycki <macro@codesourcery.com>
-
- * config/tc-mips.c (move_register): Fix formatting.
-
-2011-10-24 Maciej W. Rozycki <macro@codesourcery.com>
-
- * config/tc-mips.c (can_swap_branch_p): Remove empty line.
- (start_noreorder): Likewise.
-
-2011-10-24 Maciej W. Rozycki <macro@codesourcery.com>
-
- * config/tc-mips.c (s_option): Fix formatting.
- (mips_elf_final_processing): Likewise.
-
-2011-10-24 Maciej W. Rozycki <macro@codesourcery.com>
-
- * config/tc-mips.c (validate_micromips_insn): Fix formatting.
-
-2011-10-24 David Binderman <dcb314@hotmail.com>
-
- * config/tc-mn10200.c (md_convert_frag): Add missing break.
-
-2011-10-21 Tristan Gingold <gingold@adacore.com>
-
- * config/tc-alpha.c (load_expression): Use symbol_mark_used accessor.
- (s_alpha_comm): Use symbol_set_frag accessor.
-
-2011-10-20 Alan Modra <amodra@gmail.com>
-
- * config/tc-mips.c (micromips_add_label): Avoid gcc warning.
- (md_convert_frag): Likewise.
-
-2011-10-18 Jie Zhang <jie@codesourcery.com>
- Julian Brown <julian@codesourcery.com>
-
- * config/tc-arm.c (parse_shifter_operand): Fix handling of explicit
- rotation.
- (encode_arm_shifter_operand): Likewise.
-
-2011-10-13 James Greenhalgh <james.greenhalgh@arm.com>
-
- * config/tc-arm.c (check_ldr_r15_aligned): New.
- (do_ldst): Warn in upredictable cases.
- (do_t_ldst): Likewise.
- (insns): Update accordingly.
-
-2011-10-13 Alan Modra <amodra@gmail.com>
-
- * as.c (main): Define .gasversion. rather than __GAS_VERSION__.
- * frags.h (bss_address_frag): Delete
- (predefined_address_frag): New.
- * frags.c (frag_init): Init predefined_address_frag. Delete ref
- to bss_address_frag.
- * symbols.c (S_CAN_BE_REDEFINED): New function.
- * symbols.h (S_CAN_BE_REDEFINED): Declare.
- * read.c (assign_symbol): Use S_CAN_BE_REDEFINED.
-
-2011-10-12 Alan Modra <amodra@gmail.com>
-
- * symbols.c (local_symbol_make): Make global.
- * symbols.h (local_symbol_make): Declare.
- * as.c (main): Define __GAS_VERSION__.
-
-2011-10-10 Nick Clifton <nickc@redhat.com>
-
- * po/es.po: Updated Spanish translation.
- * po/fi.po: Updated Finnish translation.
- * po/fr.po: Updated French translation.
-
-2011-10-05 DJ Delorie <dj@redhat.com>
- Nick Clifton <nickc@redhat.com>
-
- * config/rx-defs.h (rx_pid_register): New.
- (rx_gp_register): New.
- * config/rx-parse.y (rx_lex): Add support for %gpreg and %pidreg.
- (displacement): Add PID support.
- * config/tc-rx.c (rx_pid_mode): New.
- (rx_num_int_regs): New.
- (rx_pid_register): New.
- (rx_gp_register): New.
- (options): Add -mpid and -mint-register= options.
- (md_longopts): Likewise.
- (md_parse_option): Likewise.
- (md_show_usage): Likewise.
- (rx_pid_symbol): New.
- (rx_pidreg_symbol): New.
- (rx_gpreg_symbol): New.
- (md_begin): Support PID.
- (rx_validate_fix_sub): Support PID.
- (tc_gen_reloc): Support PID.
- * doc/c-rx.texi: Document PID support.
-
-2011-09-27 Kai Tietz <ktietz@redhat.com>
-
- * config/obj-coff.c (obj_coff_section): Add 'e' as specifier
- for marking section SEC_EXCLUDE.
-
-2011-09-22 Tristan Gingold <gingold@adacore.com>
-
- * NEWS: Add marker for 2.22.
-
-2011-09-21 David S. Miller <davem@davemloft.net>
-
- * config/tc-sparc.c (hwcap_allowed): New.
- (struct sparc_arch): New field 'hwcap_allowed' containing a bitmask
- of F_FOO flags which are enabled by the particular arch setting.
- Add new options that provide explicit access to new instructions.
- (md_parse_option): Only bump max_architecture if the requested one
- is larger, or this is the first explicit request.
- (get_hwcap_name): New function.
- (sparc_ip): Validate that hwcaps used by an instruction have actually
- been enabled.
- * doc/c-sparc.texi: Document new sparc options.
-
-2011-09-21 David S. Miller <davem@davemloft.net>
-
- * config/tc-sparc.c (hwcap_seen): New bitmask, defined when
- not TE_SOLARIS.
- (sparc_ip): When not TE_SOLARIS, accumulate hwcap bits from
- sparc_opcode->flags of instruction into hwcap_seen.
- (sparc_md_end): Create Tag_GNU_Sparc_HWCAPS attribute if
- hwcap_seen is non-zero and not TE_SOLARIS.
-
-2011-09-19 Tristan Gingold <gingold@adacore.com>
-
- * config/tc-alpha.c (insert_operand): Call as_bad_value_out_of_range
- instead of as_warn_out_of_range.
-
-2011-09-08 Mark Fortescue <mark@mtfhpc.demon.co.uk>
-
- * config/tc-sparc.c (sparc_ip): Handle 'i' + r<0..31>
- in addition to 'i' + [goli]<0..7>.
-
-2011-09-08 Joern Rennecke <joern.rennecke@embecosm.com>
-
- * cgen.c (gas_cgen_pcrel_r_type): New function.
- (gas_cgen_tc_gen_reloc): Check for GAS_CGEN_PCREL_R_TYPE.
- * cgen.h (gas_cgen_pcrel_r_type): Declare.
-
-2011-09-08 Richard Sandiford <rdsandiford@googlemail.com>
-
- PR gas/13167
- * dwarf2dbg.c (dwarf2_flush_pending_lines): Use symbol_temp_new_now.
-
-2011-09-05 Richard Sandiford <rdsandiford@googlemail.com>
-
- PR gas/13024
- * dwarf2dbg.c (pending_lines, pending_lines_tail): New variables.
- (dwarf2_gen_line_info_1): Delete.
- (dwarf2_push_line, dwarf2_flush_pending_lines): New functions.
- (dwarf2_gen_line_info, dwarf2_emit_label): Use them.
- (dwarf2_consume_line_info): Call dwarf2_flush_pending_lines.
- (dwarf2_directive_loc): Push previous .locs instead of generating
- them immediately.
-
-2011-08-26 Nick Clifton <nickc@redhat.com>
-
- * po/es.po: Updated Spanish translation.
-
-2011-08-26 Tristan Gingold <gingold@adacore.com>
-
- * config/tc-alpha.c (s_alpha_linkage): Simplify. Add comments.
-
-2011-08-26 Tristan Gingold <gingold@adacore.com>
-
- * config/tc-alpha.c (add_to_link_pool): Improve comment.
- (s_alpha_fp_save): Fix indentation.
-
-2011-08-19 Nick Clifton <nickc@redhat.com>
-
- * doc/as.texinfo: Include c-xstormy16.texi.
-
-2011-08-18 Alan Modra <amodra@gmail.com>
-
- * write.c (resolve_reloc_expr_symbols): Convert local symbols
- on relocs to section+offset.
- (get_frag_for_reloc): New function.
- (write_relocs): Merge sort fixup relocs with those from .reloc
- directives.
-
-2011-08-10 Maciej W. Rozycki <macro@codesourcery.com>
-
- * config/tc-mips.c (can_swap_branch_p): Update the comment on
- MIPS16 fixups.
-
-2011-08-09 Chao-ying Fu <fu@mips.com>
- Daniel Jacobowitz <dan@codesourcery.com>
-
- * config/tc-mips.c (mips_cpu_info_table): Add "m14k" and
- "m14kc".
- * doc/c-mips.texi (MIPS architecture options): Add "m14k" and
- "m14kc" to the list of -march options.
-
-2011-08-09 Chao-ying Fu <fu@mips.com>
- Maciej W. Rozycki <macro@codesourcery.com>
-
- * config/tc-mips.c (mips_set_options): Add ase_mcu.
- (mips_opts): Initialise ase_mcu to -1.
- (ISA_SUPPORTS_MCU_ASE): New macro.
- (MIPS_CPU_ASE_MCU): Likewise.
- (is_opcode_valid): Handle MCU.
- (macro_build, macro): Likewise.
- (validate_mips_insn, validate_micromips_insn): Likewise.
- (mips_ip): Likewise.
- (options): Add OPTION_MCU and OPTION_NO_MCU.
- (md_longopts): Add mmcu and mno-mcu.
- (md_parse_option): Handle OPTION_MCU and OPTION_NO_MCU.
- (mips_after_parse_args): Handle MCU.
- (s_mipsset): Likewise.
- (md_show_usage): Handle MCU options.
-
- * doc/as.texinfo: Document -mmcu and -mno-mcu options.
- * doc/c-mips.texi: Likewise, and document ".set mcu" and
- ".set nomcu" directives.
-
-2011-08-09 Maciej W. Rozycki <macro@codesourcery.com>
-
- * config/tc-mips.c (gpr_mod_mask): Remove INSN2_MOD_GPR_MB,
- INSN2_MOD_GPR_MC, INSN2_MOD_GPR_ME, INSN2_MOD_GPR_MG,
- INSN2_MOD_GPR_MHI, INSN2_MOD_GPR_MJ, INSN2_MOD_GPR_MM,
- INSN2_MOD_GPR_MN, INSN2_MOD_GPR_MP and INSN2_MOD_GPR_MQ opcode
- register use checks.
- (gpr_read_mask): Add INSN2_READ_GPR_MC, INSN2_READ_GPR_ME
- INSN2_READ_GPR_MG, INSN2_READ_GPR_MJ, INSN2_READ_GPR_MMN,
- INSN2_READ_GPR_MP and INSN2_READ_GPR_MQ opcode register use
- checks.
- (gpr_write_mask): Replace INSN2_WRITE_GPR_S opcode register
- use flag with INSN_WRITE_GPR_S. Add INSN2_WRITE_GPR_MB,
- INSN2_WRITE_GPR_MHI, INSN2_WRITE_GPR_MJ and INSN2_WRITE_GPR_MP
- opcode register use checks.
- (can_swap_branch_p): Enable microMIPS branch swapping.
- (append_insn): Likewise.
-
-2011-08-09 Maciej W. Rozycki <macro@codesourcery.com>
-
- * config/tc-mips.c (RELAX_MICROMIPS_ENCODE): Remove forced 16-bit
- branch size information.
- (RELAX_MICROMIPS_U16BIT): Remove macro.
- (RELAX_MICROMIPS_UNCOND): Adjust accordingly.
- (RELAX_MICROMIPS_COMPACT, RELAX_MICROMIPS_LINK): Likewise.
- (RELAX_MICROMIPS_RELAX32): Likewise.
- (RELAX_MICROMIPS_TOOFAR16): Likewise.
- (RELAX_MICROMIPS_MARK_TOOFAR16): Likewise.
- (RELAX_MICROMIPS_CLEAR_TOOFAR16): Likewise.
- (RELAX_MICROMIPS_TOOFAR32): Likewise.
- (RELAX_MICROMIPS_MARK_TOOFAR32): Likewise.
- (RELAX_MICROMIPS_CLEAR_TOOFAR32): Likewise.
- (append_insn): Always check forced_insn_length for microMIPS
- relaxation. Adjust code for the removal of
- RELAX_MICROMIPS_U16BIT.
- (mips_ip) <'D', 'E'>: If forced_insn_length, then emit the
- relocation straight away.
- (relaxed_micromips_16bit_branch_length): Adjust code for the
- removal of RELAX_MICROMIPS_U16BIT.
-
-2011-08-08 Tristan Gingold <gingold@adacore.com>
-
- * config/obj-macho.c (obj_mach_o_section): New function.
- (struct known_section): New type.
- (known_sections): Declare.
- (obj_mach_o_known_section): New function.
- (obj_mach_o_common_parse): Ditto.
- (obj_mach_o_comm): Ditto.
- (obj_mach_o_subsections_via_symbols): Ditto.
- (mach_o_pseudo_table): Add new pseudos.
-
-2011-08-06 Richard Henderson <rth@redhat.com>
-
- * dw2gencfi.c (all_fde_data): Export.
- * dw2gencfi.h (all_fde_data): Declare.
- * config/tc-alpha.c (alpha_elf_md_end): Don't convert legacy unwind
- info to cfi unwind info if the user already has supplied some.
-
-2011-08-06 Richard Sandiford <rdsandiford@googlemail.com>
-
- * config/tc-mips.c (emit_nop): Delete.
- (get_delay_slot_nop): New function.
- (nops_for_insn_or_target): Use it.
- (append_insn): Likewise. When avoiding hazards, call add_fixed_insn
- and insert_into_history directly.
-
-2011-08-06 Richard Sandiford <rdsandiford@googlemail.com>
-
- * config/tc-mips.c (delayed_branch_p, compact_branch_p)
- (uncond_branch_p, branch_likely_p): New functions.
- (insns_between, nops_for_insn_or_target, append_insn)
- (macro_start): Use them.
- (get_append_method): Likewise. Remove redundant test.
-
-2011-08-05 David S. Miller <davem@davemloft.net>
-
- * config/tc-sparc.c (v9a_asr_table): Add "cps".
- (sparc_ip): Handle '4', '5' and '(' format codes.
-
-2011-08-04 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/13056
- * output-file.c (output_file_close): Call bfd_cache_close_all
- on error.
-
- * write.c (write_object_file): Revert the last change.
-
-2011-08-04 Alan Modra <amodra@gmail.com>
-
- * write.c (write_object_file): Call set_symtab even if we had
- errors.
-
-2011-08-04 Tristan Gingold <gingold@adacore.com>
-
- * config/obj-elf.c (obj_elf_section): Do not free name.
-
-2011-08-03 James Greenhalgh <james.greenhalgh@arm.com>
-
- * config/tc-arm.c (do_t_strexbh): New.
- (insns): Update accordingly.
-
-2011-08-01 H.J. Lu <hongjiu.lu@intel.com>
-
- PR ld/13048
- * config/tc-i386.c (handle_quad): Removed.
- (md_pseudo_table): Remove "quad".
- (tc_gen_reloc): Don't check BFD_RELOC_64 for disallow_64bit_reloc.
- (x86_dwarf2_addr_size): New.
-
- * config/tc-i386.h (x86_dwarf2_addr_size): New.
- (DWARF2_ADDR_SIZE): Likewise.
-
-2011-08-01 Nick Clifton <nickc@redhat.com>
-
- PR ld/12974
- * config/tc-arm.c (literal_pool): Add locs field.
- (add_to_lit_pool): Initialise the locs entry for the new literal.
- (s_ltorg): Generate a DWARF2 line number entry for each emitted
- literal pool entry.
-
-2011-08-01 Tristan Gingold <gingold@adacore.com>
-
- * write.c (write_relocs): Fix -Wshadow in DEBUG3 and DEBUG4.
-
-2011-08-01 Tristan Gingold <gingold@adacore.com>
-
- * frags.c (frag_grow): Simplify the code.
-
-2011-07-30 Richard Sandiford <rdsandiford@googlemail.com>
-
- * config/tc-mips.c (nops_for_vr4130): Revert previous commit.
-
-2011-07-29 Maciej W. Rozycki <macro@codesourcery.com>
-
- * config/tc-mips.c: Adjust comments throughout.
- (reglist_lookup): Reshape code.
- (jmp_reloc_p, jalr_reloc_p): Reformat.
- (got16_reloc_p, hi16_reloc_p, lo16_reloc_p): Handle microMIPS
- relocations.
- (gpr_mod_mask): Remove unused variable.
- (gpr_read_mask, gpr_write_mask): Reshape code.
- (fpr_read_mask, fpr_write_mask): Likewise.
- (nops_for_vr4130): Ensure non-microMIPS mode.
- (can_swap_branch_p): Correct pinfo2 reference. Reshape code.
- (append_insn): Skip Loongson 2F workaround in MIPS16 mode. Use
- the outermost operator of a compound relocation to determines
- the relocated field. Fix formatting.
- (md_convert_frag): Reshape code.
-
-2011-07-29 Tristan Gingold <gingold@adacore.com>
-
- * frags.c (frag_var_init): New function.
- (frag_var): Call frag_var_init to initialize.
- (frag_variant): Ditto.
-
-2011-07-27 Nathan Sidwell <nathan@codesourcery.com>
-
- * dwarf2dbg.c (out_debug_line): Ignore non-normal segments, with a
- warning.
- * doc/as.texinfo (Offset): Document .offset directive.
-
-2011-07-27 Tristan Gingold <gingold@adacore.com>
-
- * frags.c (frag_grow): Revert previous patch.
-
-2011-07-26 Kazuhiro Inaoka <kazuhiro.inaoka.ud@renesas.com>
-
- * config/tc-rx.c (md_convert_frag): Fix encoding of beq.a
- synthetic instruction.
-
-2011-07-25 Tristan Gingold <gingold@adacore.com>
-
- * frags.c (frag_grow): Simplify the code.
-
-2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
- Chao-ying Fu <fu@mips.com>
- Richard Sandiford <rdsandiford@googlemail.com>
-
- * config/tc-mips.h (mips_segment_info): Add one bit for
- microMIPS.
- (TC_LABEL_IS_LOCAL): New macro.
- (mips_label_is_local): New prototype.
- * config/tc-mips.c (S0, S7): New macros.
- (emit_branch_likely_macro): New variable.
- (mips_set_options): Add micromips.
- (mips_opts): Initialise micromips to -1.
- (file_ase_micromips): New variable.
- (CPU_HAS_MICROMIPS): New macro.
- (hilo_interlocks): Set for microMIPS too.
- (gpr_interlocks): Likewise.
- (cop_interlocks): Likewise.
- (cop_mem_interlocks): Likewise.
- (HAVE_CODE_COMPRESSION): New macro.
- (micromips_op_hash): New variable.
- (micromips_nop16_insn, micromips_nop32_insn): New variables.
- (NOP_INSN): Handle microMIPS ASE.
- (mips32_to_micromips_reg_b_map): New macro.
- (mips32_to_micromips_reg_c_map): Likewise.
- (mips32_to_micromips_reg_d_map): Likewise.
- (mips32_to_micromips_reg_e_map): Likewise.
- (mips32_to_micromips_reg_f_map): Likewise.
- (mips32_to_micromips_reg_g_map): Likewise.
- (mips32_to_micromips_reg_l_map): Likewise.
- (mips32_to_micromips_reg_n_map): Likewise.
- (mips32_to_micromips_reg_h_map): New variable.
- (mips32_to_micromips_reg_m_map): Likewise.
- (mips32_to_micromips_reg_q_map): Likewise.
- (micromips_to_32_reg_h_map): New variable.
- (micromips_to_32_reg_i_map): Likewise.
- (micromips_to_32_reg_m_map): Likewise.
- (micromips_to_32_reg_q_map): Likewise.
- (micromips_to_32_reg_b_map): New macro.
- (micromips_to_32_reg_c_map): Likewise.
- (micromips_to_32_reg_d_map): Likewise.
- (micromips_to_32_reg_e_map): Likewise.
- (micromips_to_32_reg_f_map): Likewise.
- (micromips_to_32_reg_g_map): Likewise.
- (micromips_to_32_reg_l_map): Likewise.
- (micromips_to_32_reg_n_map): Likewise.
- (micromips_imm_b_map, micromips_imm_c_map): New macros.
- (RELAX_DELAY_SLOT_16BIT): New macro.
- (RELAX_DELAY_SLOT_SIZE_FIRST): Likewise.
- (RELAX_DELAY_SLOT_SIZE_SECOND): Likewise.
- (RELAX_MICROMIPS_ENCODE, RELAX_MICROMIPS_P): New macros.
- (RELAX_MICROMIPS_TYPE, RELAX_MICROMIPS_AT): Likewise.
- (RELAX_MICROMIPS_U16BIT, RELAX_MICROMIPS_UNCOND): Likewise.
- (RELAX_MICROMIPS_COMPACT, RELAX_MICROMIPS_LINK): Likewise.
- (RELAX_MICROMIPS_RELAX32, RELAX_MICROMIPS_TOOFAR16): Likewise.
- (RELAX_MICROMIPS_MARK_TOOFAR16): Likewise.
- (RELAX_MICROMIPS_CLEAR_TOOFAR16): Likewise.
- (RELAX_MICROMIPS_TOOFAR32): Likewise.
- (RELAX_MICROMIPS_MARK_TOOFAR32): Likewise.
- (RELAX_MICROMIPS_CLEAR_TOOFAR32): Likewise.
- (INSERT_OPERAND, EXTRACT_OPERAND): Handle microMIPS ASE.
- (mips_macro_warning): Add delay_slot_16bit_p, delay_slot_32bit_p,
- fsize and insns.
- (mips_mark_labels): New function.
- (mips16_small, mips16_ext): Remove variables, replacing with...
- (forced_insn_size): ... this.
- (append_insn, mips16_ip): Update accordingly.
- (micromips_insn_length): New function.
- (insn_length): Return the length of microMIPS instructions.
- (mips_record_mips16_mode): Rename to...
- (mips_record_compressed_mode): ... this. Handle microMIPS ASE.
- (install_insn): Handle microMIPS ASE.
- (reglist_lookup): New function.
- (is_size_valid, is_delay_slot_valid): Likewise.
- (md_begin): Handle microMIPS ASE.
- (md_assemble): Likewise. Update for append_insn interface change.
- (micromips_reloc_p): New function.
- (got16_reloc_p): Handle microMIPS ASE.
- (hi16_reloc_p): Likewise.
- (lo16_reloc_p): Likewise.
- (jmp_reloc_p): New function.
- (jalr_reloc_p): Likewise.
- (matching_lo_reloc): Handle microMIPS ASE.
- (insn_uses_reg, reg_needs_delay): Likewise.
- (mips_move_labels): Likewise.
- (mips16_mark_labels): Rename to...
- (mips_compressed_mark_labels): ... this. Handle microMIPS ASE.
- (gpr_mod_mask): New function.
- (gpr_read_mask, gpr_write_mask): Handle microMIPS ASE.
- (fpr_read_mask, fpr_write_mask): Likewise.
- (insns_between, nops_for_vr4130, nops_for_insn): Likewise.
- (fix_loongson2f_nop, fix_loongson2f_jump): Likewise.
- (MICROMIPS_LABEL_CHAR): New macro.
- (micromips_target_label, micromips_target_name): New variables.
- (micromips_label_name, micromips_label_expr): New functions.
- (micromips_label_inc, micromips_add_label): Likewise.
- (mips_label_is_local): Likewise.
- (micromips_map_reloc): Likewise.
- (can_swap_branch_p): Handle microMIPS ASE.
- (append_insn): Add expansionp argument. Handle microMIPS ASE.
- (start_noreorder, end_noreorder): Handle microMIPS ASE.
- (macro_start, macro_warning, macro_end): Likewise.
- (brk_fmt, cop12_fmt, jalr_fmt, lui_fmt): New variables.
- (mem12_fmt, mfhl_fmt, shft_fmt, trap_fmt): Likewise.
- (BRK_FMT, COP12_FMT, JALR_FMT, LUI_FMT): New macros.
- (MEM12_FMT, MFHL_FMT, SHFT_FMT, TRAP_FMT): Likewise.
- (macro_build): Handle microMIPS ASE. Update for append_insn
- interface change.
- (mips16_macro_build): Update for append_insn interface change.
- (macro_build_jalr): Handle microMIPS ASE.
- (macro_build_lui): Likewise. Simplify.
- (load_register): Handle microMIPS ASE.
- (load_address): Likewise.
- (move_register): Likewise.
- (macro_build_branch_likely): New function.
- (macro_build_branch_ccl): Likewise.
- (macro_build_branch_rs): Likewise.
- (macro_build_branch_rsrt): Likewise.
- (macro): Handle microMIPS ASE.
- (validate_micromips_insn): New function.
- (expr_const_in_range): Likewise.
- (mips_ip): Handle microMIPS ASE.
- (options): Add OPTION_MICROMIPS and OPTION_NO_MICROMIPS.
- (md_longopts): Add mmicromips and mno-micromips.
- (md_parse_option): Handle OPTION_MICROMIPS and
- OPTION_NO_MICROMIPS.
- (mips_after_parse_args): Handle microMIPS ASE.
- (md_pcrel_from): Handle microMIPS relocations.
- (mips_force_relocation): Likewise.
- (md_apply_fix): Likewise.
- (mips_align): Handle microMIPS ASE.
- (s_mipsset): Likewise.
- (s_cpload, s_cpsetup, s_cpreturn): Use relocation wrappers.
- (s_dtprel_internal): Likewise.
- (s_gpword, s_gpdword): Likewise.
- (s_insn): Handle microMIPS ASE.
- (s_mips_stab): Likewise.
- (relaxed_micromips_32bit_branch_length): New function.
- (relaxed_micromips_16bit_branch_length): New function.
- (md_estimate_size_before_relax): Handle microMIPS ASE.
- (mips_fix_adjustable): Likewise.
- (tc_gen_reloc): Handle microMIPS relocations.
- (mips_relax_frag): Handle microMIPS ASE.
- (md_convert_frag): Likewise.
- (mips_frob_file_after_relocs): Likewise.
- (mips_elf_final_processing): Likewise.
- (mips_nop_opcode): Likewise.
- (mips_handle_align): Likewise.
- (md_show_usage): Handle microMIPS options.
- * symbols.c (TC_LABEL_IS_LOCAL): New macro.
- (S_IS_LOCAL): Add a TC_LABEL_IS_LOCAL check.
-
- * doc/as.texinfo (Target MIPS options): Add -mmicromips and
- -mno-micromips.
- (-mmicromips, -mno-micromips): New options.
- * doc/c-mips.texi (-mmicromips, -mno-micromips): New options.
- (MIPS ISA): Document .set micromips and .set nomicromips.
- (MIPS insn): Update for microMIPS support.
-
-2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
-
- * config/tc-mips.c (mips_ip): Make a copy of the instruction's
- mnemonic and use it for further processing.
-
-2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
-
- * config/tc-mips.c (can_swap_branch_p): Adjust for the rename of
- INSN_TRAP to INSN_NO_DELAY_SLOT. Remove the check for INSN_SYNC
- as well as explicit checks for ERET and DERET when scheduling
- branch delay slots.
-
-2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (cpu_arch): Add k1om.
- (i386_align_code): Handle PROCESSOR_K1OM.
- (check_cpu_arch_compatible): Check EM_K1OM.
- (i386_arch): Handle Intel K1OM.
- (i386_mach): Return bfd_mach_k1om for Intel K1OM.
- (i386_target_format): Return ELF_TARGET_K1OM_FORMAT for Intel
- K1OM.
-
- * config/tc-i386.h (ELF_TARGET_K1OM_FORMAT): New.
- (processor_type): Add PROCESSOR_K1OM.
-
- * doc/c-i386.texi: Document k1om.
-
-2011-07-18 H.J. Lu <hongjiu.lu@intel.com>
-
- * doc/c-i386.texi: Fix a typo.
-
-2011-07-06 Aurelien Jarno <aurelien@aurel32.net>
-
- * config/tc-mips.c (append_insn): delete prev_pinfo2 and pinfo2.
-
-2011-07-04 Richard Sandiford <rdsandiford@googlemail.com>
-
- * config/tc-mips.c (gpr_read_mask, gpr_write_mask): Fix handling
- of register 0.
-
-2011-07-04 Maciej W. Rozycki <macro@codesourcery.com>
-
- * config/tc-mips.c (append_insn): Make sure DWARF-2 location
- information is properly adjusted for branches that get swapped.
-
-2011-07-03 Samuel Thibault <samuel.thibault@gnu.org>
- Thomas Schwinge <thomas@schwinge.name>
-
- PR binutils/12913
- * config/obj-elf.c (obj_elf_type): Use ELFOSABI_GNU name instead of
- ELFOSABI_LINUX alias.
- * config/tc-ia64.c: Likewise.
-
-2011-06-30 Paul Carroll <pcarroll@codesourcery.com>
-
- * config/tc-arm.c (do_t_add_sub): Only allow LSL shifts of less
- than 4 in Thumb mode.
-
-2011-06-30 Nick Clifton <nickc@redhat.com>
-
- PR gas/12848
- * config/tc-arm.c (BAD_RANGE): New error message define.
- (md_apply_fix): Use it.
- Fix range check for thumb branch instructions.
-
-2011-06-29 Richard Sandiford <rdsandiford@googlemail.com>
-
- * config/tc-mips.c (append_method): New enum.
- (can_swap_branch_p, get_append_method): New functions.
- (append_insn): Use get_append_method to decide how the instruction
- should be added.
-
-2011-06-29 Richard Sandiford <rdsandiford@googlemail.com>
-
- * config/tc-mips.c (append_insn): Remove bogus goto.
-
-2011-06-29 Richard Sandiford <rdsandiford@googlemail.com>
-
- * config/tc-mips.c (append_insn): Always clear the history after an
- unconditional branch.
-
-2011-06-29 Richard Sandiford <rdsandiford@googlemail.com>
-
- * config/tc-mips.c (find_altered_mips16_opcode): New function.
- (append_insn): Use it.
-
-2011-06-29 Richard Sandiford <rdsandiford@googlemail.com>
-
- * config/tc-mips.c (insn_uses_reg): Delete.
- (gpr_read_mask, gpr_write_mask): New functions.
- (fpr_read_mask, fpr_write_mask): Likewise.
- (insns_between, nops_for_vr4130, append_insn): Use them.
-
-2011-06-29 Richard Sandiford <rdsandiford@googlemail.com>
-
- * config/tc-mips.c (md_mips_end): Call mips_emit_delays.
-
-2011-06-29 Dave Martin <dave.martin@linaro.org>
-
- PR gas/12931
- * config/tc-arm.c (mapping_state): When changing to ARM or THUMB
- state set the minimum required alignment of the section.
-
-2011-06-29 Tristan Gingold <gingold@adacore.com>
-
- * config/tc-i386.c (i386_mach): Convert to ISO-C.
- (md_begin, pe_directive_secrel, md_estimate_size_before_relax): Ditto.
- (md_convert_frag, md_apply_fix, md_undefined_symbol): Ditto.
- (md_section_align, tc_gen_reloc): Ditto.
-
-2011-06-28 Tristan Gingold <gingold@adacore.com>
-
- * config/tc-alpha.c (s_alpha_pdesc): Fix indentation. Do not
- generate dummy fix.
-
-2011-06-28 Tristan Gingold <gingold@adacore.com>
-
- * config/tc-alpha.c (load_expression): Use alloca instead of xmalloc.
- (emit_jsrjmp): Ditto.
- (tc_gen_reloc): Ditto.
-
-2011-06-28 Tristan Gingold <gingold@adacore.com>
-
- * config/tc-alpha.c (alpha_evax_proc_hash): Remove.
- (alpha_evax_proc_data): New variable.
- (s_alpha_ent): Prevent nested function. Remove has_insert call.
- (s_alpha_pdesc): Do not call demand_empty_rest_of_line in case of
- error. Do not search in the hash table. Check if match with .ent.
- (s_alpha_name): Remove unused variable.
- (md_begin): Remove initialization of alpha_evax_proc_hash.
-
-2011-06-27 Tristan Gingold <gingold@adacore.com>
-
- * config/tc-alpha.c (add_to_link_pool): Remove basesym parameter.
- Locally declare basesym. Add comments. Do not set literal_pool_size.
- (load_expression): Adjust call to add_to_link_pool.
- (s_alpha_pdesc): Define pdesc symbol using dot.
- Do not set literal_pool_size.
- (s_alpha_end): Use NULL instead of 0.
-
-2011-06-27 Tristan Gingold <gingold@adacore.com>
-
- * config/obj-evax.c (evax_frob_file_before_adjust): Add comments.
- Fix style.
- * config/obj-evax.h (struct alpha_linkage_fixups): Remove seg
- field. Add comments.
- (obj_symbol_type, object_headers, OBJ_SYMFIELD_TYPE): Remove
-
-2011-06-26 Richard Sandiford <rdsandiford@googlemail.com>
-
- * config/tc-mips.c (fix_24k_record_store_info): If the previous
- instruction was a store, and the next instructions are unknown,
- assume the worst.
-
-2011-06-25 Richard Sandiford <rdsandiford@googlemail.com>
-
- PR gas/12915
- * config/tc-mips.c (nops_for_vr4130, nops_for_24k, nops_for_insn)
- (nops_for_sequence, nops_for_insn_or_target): Add ignore parameters.
- (mips_emit_delays, start_noreorder): Update accordingly.
- (append_insn): Likewise. Revert original fix for this PR
- and use the ignore parameter instead.
-
-2011-06-24 Tristan Gingold <gingold@adacore.com>
-
- PR gas/11625
- * config/obj-evax.c (evax_frob_symbol): Use as_bad instead of abort.
-
-2011-06-24 Tristan Gingold <gingold@adacore.com>
-
- * config/tc-alpha.c (add_to_link_pool): Remove useless offset
- variable. Fix style.
-
-2011-06-23 Richard Sandiford <rdsandiford@googlemail.com>
-
- PR gas/12915
- * config/tc-mips.c (append_insn): Only consider hazards between the
- pre-noreorder block and ip.
-
-2011-06-21 Sameera Deshpande <sameera.deshpande@arm.com>
-
- * config/tc-arm.c (vfp_conv): Add check on range of immediate operand
- in vcvt instruction between floating-point and fixed-point.
- (operand_parse_code): Add "OP_oI32z".
- (parse_operands): OP_oI32z case added.
-
-2011-06-20 H.J. Lu <hongjiu.lu@intel.com>
-
- * configure.tgt: Revert x32 change.
-
-2011-06-20 Nick Clifton <nickc@redhat.com>
-
- * doc/Makefile.am: (CPU_DOCS): Add c-xstormy16.texi.
- * doc/Makefile.in: Regenerate.
- * doc/all.texi: Set XSTORMY16.
- * doc/c-xstormy16.texi: New file.
-
-2011-06-19 H.J. Lu <hongjiu.lu@intel.com>
-
- * configure.tgt: Support x32.
-
-2011-06-15 Nick Clifton <nickc@redhat.com>
-
- * NEWS: Mention addition of TILEPRO and TIKE-Gx support.
-
-2011-06-14 Tristan Gingold <gingold@adacore.com>
-
- * config/tc-ppc.h (struct ppc_tc_sy): Complete comment on within.
- (tc_new_dot_label): Define.
- (ppc_new_dot_label): Declare.
- * config/tc-ppc.c (ppc_frob_label): Set within target field.
- (ppc_fix_adjustable): Use this field to adjust the reloc.
- (ppc_new_dot_label): New function.
-
-2011-06-14 Alan Modra <amodra@gmail.com>
-
- * po/POTFILES.in: Regenerate.
-
-2011-06-13 Walter Lee <walt@tilera.com>
-
- * Makefile.am (TARGET_CPU_CFILES): Add config/tc-tilegx.c and
- config/tc-tilepro.c.
- (TARGET_CPU_HFILES): Add config/tc-tilegx.h and
- config/tc-tilepro.h.
- * Makefile.in: Regenerate.
- * configure.tgt (tilepro-*-*): New.
- (tilegx-*-*): Likewise.
- * config/tc-tilegx.c: New file.
- * config/tc-tilegx.h: Likewise.
- * config/tc-tilepro.h: Likewise.
- * config/tc-tilepro.c: Likewise.
- * doc/Makefile.am (CPU_DOCS): Add c-tilegx.texi and
- c-tilepro.texi.
- * doc/Makefile.in: Regenerate.
- * doc/all.texi (TILEGX): Define.
- (TILEPRO): Define.
- * doc/as.texinfo: Add Tile-Gx and TILEPro documentation. Include
- c-tilegx.texi and c-tilepro.texi.
- * doc/c-tilegx.texi: New.
- * doc/c-tilepro.texi: New.
-
-2011-06-13 Nick Clifton <nickc@redhat.com>
-
- PR gas/12854
- * config/tc-arm.c (do_shift): Do not allow shift operations at the
- end of a register based shift insn.
- (do_t_shift): Likewise.
-
-2011-06-13 Nick Clifton <nickc@redhat.com>
-
- * config/tc-score.c (s3_my_get_expression): Delete unused local
- variable 'seg'.
- (s3_do_ldst_insn): Delete unused local variable 'strbak'.
- (s3_do16_ldst_insn): Delete unused local variable 'temp'.
- (s3_do_macro_bcmp): Zero inst_expand array.
- (s3_do_macro_bcmpz): Likewise.
- (s3_s_score_end): Delete unused local variable 'dot'.
- (s3_gen_reloc): Delete unused local variables 'f', 's', and 'e'.
- * config/tc-score7.c (s7_my_get_expression): Delete unused local
- variable 'seg'.
- (s7_do_ldst_insn): Delete unused local variable 'strbak'.
- (s7_b32_relax_to_b16): Delete unused local variables 'r_old' and
- 'r_new'.
- (s7_s_score_end): Delete unused local variable 'dot'.
- (s7_relax_frag): Delete unused local variable 'relax_size'.
- (s7_gen_reloc): Delete unused local variables 'f', 's', and 'e'.
-
-2011-06-10 H.J. Lu <hongjiu.lu@intel.com>
-
- AVX Programming Reference (June, 2011)
- * config/tc-i386.c (i386_error): Add invalid_vsib_address and
- unsupported_vector_index_register.
- (cpu_arch): Add .avx2, .bmi2, .lzcnt and .invpcid.
- (check_VecOperands): New.
- (match_template): Call check_VecOperands. Handle
- invalid_vsib_address and unsupported_vector_index_register.
- (build_modrm_byte): Support VecSIB. Check register-only source
- operand when two source operands are swapped.
- (i386_index_check): Allow Xmm/Ymm index registers.
-
- * doc/c-i386.texi: Document avx2/.avx2, bmi2/.bmi2, lzcnt/.lzcnt
- and invpcid./invpcid.
-
-2011-06-09 Nick Clifton <nickc@redhat.com>
-
- PR gas/12861
- * config/tc-cr16.c (tc_gen_reloc): Remove unused local variable
- code.
- (check_cinv_options): Remove unused local variables. Make
- function void.
- (md_assemble): Remove unused local variable.
-
-2011-06-09 James Greenhalgh <james.greenhalgh@arm.com>
-
- * config/tc-arm.c (do_ldrd): Warn in unpredictable cases.
-
-2011-06-03 Arnaud Patard <arnaud.patard@rtp-net.org>
-
- PR gas/12698
- * config/tc-arm.c (parse_psr): Set m_profile to false when
- assembling for any architecture.
-
-2011-06-02 Jie Zhang jie@codesourcery.com
- Nathan Sidwell nathan@codesourcery.com
-
- * config/tc-arm.c (parse_address_main): Handle -0 offsets.
- (encode_arm_addr_mode_2): Set default sign of zero here ...
- (encode_arm_addr_mode_3): ... and here.
- (encode_arm_cp_address): ... and here.
- (md_apply_fix): Use default sign of zero here.
-
-2011-06-02 Nick Clifton <nickc@redhat.com>
-
- * as.c: Fix spelling typo.
- * read.c: Likewise.
- * config/tc-ppc.c: Likewise.
- * po/gas.pit: Regenerate.
-
-2011-05-31 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (arm_cpus): Add Cortex-R5.
- (arm_extensions): Allow idiv on ARMv7-R.
- * doc/c-arm.text: Update idiv extension restrictions.
-
-2011-05-31 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (arm_force_relocation): Resolve all pc-relative
- loads.
-
-2011-05-31 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (do_t_branch): Avoid relaxing branches to constant
- addresses.
-
-2011-05-31 Paul Brook <paul@codesourcery.com>
- Nathan Sidwell <nathan@codesourcery.com>
-
- * config/tc-arm.c (fix_new_arm): Create an absolute symbol for
- pc-relative fixes to constants.
- * config/tc-arm.h (TC_FORCE_RELOCATATION_ABS): Define.
-
-2011-05-27 Nick Clifton <nickc@redhat.com>
-
- * config/tc-s390.c (md_begin): Remove unused variable dup_insn.
-
-2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
-
- * config/tc-s390.c (md_gather_operands): Fix check for floating
- register pair operands.
-
-2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
-
- * config/tc-s390.c (md_gather_operands): Emit an error for odd
- numbered registers used as register pair operand.
-
-2011-05-23 Nick Clifton <nickc@redhat.com>
-
- * config/tc-v850.h (TC_FX_SIZE_SLACK): Define.
-
-2011-05-20 Bernd Schmidt <bernds@codesourcery.com>
-
- * config/tc-tic6x.c (tic6x_operators): Add "pcr_offset".
- (tic6x_parse_name): Handle it.
- (tic6x_fix_new_exp): Handle O_pcr_offset.
- (tic6x_fix_adjustable): Return 0 for the new relocs.
- (md_apply_fix): Handle them.
- (tc_gen_reloc): Likewise.
- * config/tc-tic6x.h (tic6x_fix_info): Add a fix_subsy member.
-
-2011-05-18 Nick Clifton <nickc@redhat.com>
-
- PR gas/12754
- * config/tc-tic30.c (ordinal_names): Allow translation of the
- ordinal names.
-
-2011-05-18 Nick Clifton <nickc@redhat.com>
-
- * config/tc-arm.c (s_unreq): Reword warning message to make it
- easier to translate.
- * config/tc-ia64.c (md_show_usage): Add note for translators.
- * configure.in (ALL_LINGUAS): Add "fi".
- * configure: Regenerate.
-
-2011-05-18 Tristan Gingold <gingold@adacore.com>
-
- * config/tc-ppc.h (ppc_tc_sy): Reorder fields.
- Put size into an union with dw.
- (OBJ_COPY_SYMBOL_ATTRIBUTES): Adjust.
- (ppc_xcoff_end): Declare.
- (md_end): Define.
- * config/tc-ppc.c: Add includes for xcoff.
- (ppc_dwsect): New function.
- (md_pseudo_table): Add dwsect.
- (struct dw_subsection): New.
- (dw_sections): New.
- (ppc_change_debug_section): New function.
- (ppc_xcoff_end): Ditto.
- (ppc_function): Adjust for ppc_tc_sy.
- (ppc_symbol_new_hook): Ditto.
- (ppc_frob_symbol): Ditto.
- (ppc_frob_section): Do not set vma for debug sections.
- (ppc_fix_adjustable): Return true for debug sections.
- * config/obj-coff.c: Add includes for xcoff.
- (coff_frob_section): Handle dwarf section.
-
-2011-05-17 Nick Clifton <nickc@redhat.com>
-
- * po/fi.po: New Finnish translation.
- * po/fr.po: Updated French translation.
-
- * config/tc-m32r.c (md_show_usage): Fix typos in descriptions.
- * config/tc-mt.c (md_assemble): Fix typos in warning messages.
- * cond.c (s_else): Fix typos in error messages.
- * config/tc-pj.c (md_assemble): Fix typo in error message.
-
-2011-05-16 Hans-Peter Nilsson <hp@axis.com>
-
- * config/tc-cris.c (md_parse_option) <OPTION_PIC>: Error if not
- emitting ELF object.
- (md_show_usage): Only mention --pic if the assembler can generate
- ELF objects.
- * doc/c-cris.texi (CRIS-Opt): Mention that generating ELF is a
- prerequisite for --pic being a valid option.
-
-2011-05-13 Frederic Marchal <fmarchal@perso.be>
-
- PR gas/12755
- * config/tc-v850.c (parse_register_list): Correct error string.
-
-2011-05-12 Quentin Neill <quentin.neill@amd.com>
-
- * config/tc-i386.c (cpu_arch): Rename PROCESSOR_BDVER1 to PROCESSOR_BD.
- (i386_align_code): Ditto
-
-2011-05-12 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
-
- PR gas/12715
- * config/tc-arm.c (parse_big_immediate): Fix parsing of 64-bit
- immediates on 32-bit hosts.
-
-2011-05-10 Quentin Neill <quentin.neill@amd.com>
-
- * config/tc-i386.c (cpu_arch): Add bdver2 and rename
- PROCESSOR_BDVER1 to PROCESSOR_BDVER.
- (i386_align_code): Rename PROCESSOR_BDVER1.
- (processor_type): Ditto.
- * doc/c-i386.texi: Add bdver2.
-
-2011-05-10 Alan Modra <amodra@gmail.com>
-
- * dw2gencfi.c (tc_cfi_endproc): Avoid "set but not used" error.
-
-2011-05-09 Paul Brook <paul@codesourcery.com>
-
- * config/tc-tic6x.c (streq): Define.
- (tic6x_get_unwind): New.
- (s_tic6x_cantunwind, s_tic6x_handlerdata, s_tic6x_endp,
- s_tic6x_personalityindex, s_tic6x_personality): New functions.
- (md_pseudo_table): Add "endp", "handlerdata", "personalityindex",
- "personality" and "cantunwind".
- (tic6x_regname_to_dw2regnum, tic6x_frame_initial_instructions,
- tic6x_start_unwind_section, tic6x_unwind_frame_regs,
- tic6x_pop_rts_offset_little, tic6x_pop_rts_offset_big,
- tic6x_unwind_reg_from_dwarf, tic6x_flush_unwind_word,
- tic6x_unwind_byte, tic6x_unwind_2byte, tic6x_unwind_uleb,
- tic6x_cfi_startproc, output_exidx_entry, tic6x_output_unwinding,
- tic6x_cfi_endproc): New.
- * config/tc-tic6x.h (TIC6X_NUM_UNWIND_REGS): Define.
- (tic6x_unwind_info): New.
- (tic6x_segment_info_type): Add marked_pr_dependency, unwind and
- text_unwind.
- (TARGET_USE_CFIPOP, tc_regname_to_dw2regnum,
- tc_cfi_frame_initial_instructions, DWARF2_DEFAULT_RETURN_COLUMN,
- DWARF2_CIE_DATA_ALIGNMENT, tc_cfi_startproc, tc_cfi_endproc,
- tc_cfi_section_name): Define.
- * doc/c-tic6x.texi: Document new unwinding directives.
- * dw2gencfi.c (tc_cfi_startproc, tc_cfi_endproc): Add default
- definitions.
- (cfi_insn_data, fde_entry, CFI_adjust_cfa_offset, CFI_return_column,
- CFI_rel_offset, CFI_escape, CFI_signal_frame, CFI_val_encoded_addr):
- Move to dw2gencfi.h.
- (CFI_EMIT_target): Define.
- (dot_cfi_sections): Check tc_cfi_section_name.
- (dot_cfi_startproc): Use tc_cfi_startproc.
- (dot_cfi_endproc): Use tc_cfi_endproc.
- * dw2gencfi.h (cfi_insn_data, fde_entry, CFI_adjust_cfa_offset,
- CFI_return_column, CFI_rel_offset, CFI_escape, CFI_signal_frame,
- CFI_val_encoded_addr): Move to here from dw2gencfi.c.
-
-2011-05-07 Alan Modra <amodra@gmail.com>
-
- * dw2gencfi.c (CUR_SEG, SET_CUR_SEG, HANDLED, SET_HANDLED): Define.
- Use throughout in place of #if SUPPORT_FRAME_LINKONCE.
- (struct fde_entry): Rename cseg to cur_seg.
- (cfi_change_reg_numbers): Remove ATTRIBUTE_UNUSED.
- (get_cfi_seg): Likewise. Use if (SUPPORT_FRAME_LINKONCE) rather
- that #if SUPPORT_FRAME_LINKONCE.
- (cfi_finish): Likewise.
-
-2011-05-06 Tristan Gingold <gingold@adacore.com>
-
- * read.c (s_comm_internal): Remove code for OBJ_VMS.
- (s_data): Ditto.
- (s_text): Ditto.
- * write.c (write_object_file): Ditto.
- * symbols.c (define_sym_at_dot): Ditto.
- (colon): Ditto.
-
-2011-05-05 Alan Modra <amodra@gmail.com>
-
- * dw2gencfi.c (SUPPORT_FRAME_LINKONCE): Define. Use throughout
- file to conditionally compile code added 2011-04-26.
- (cfi_change_reg_numbers): Add ATTRIBUTE_UNUSED on params only used
- when SUPPORT_FRAME_LINKONCE.
- (get_cfi_seg): Likewise. Reintroduce old code for when not
- SUPPORT_FRAME_LINKONCE.
- (cfi_finish): Move get_cfi_seg calls out of loop when not
- SUPPORT_FRAME_LINKONCE. Avoid unused var warning.
-
-2011-05-03 Paul Brook <paul@codesourcery.com>
-
- * config/tc-tic6x.c (s_ehtype): New function.
- (md_pseudo_table): Add "ehtype".
- (tic6x_fix_adjustable, md_apply_fix): BFD_RELOC_C6000_EHTYPE.
- * doc/c-tic6x.texi: Document .ehtype directive.
-
-2011-04-26 Kai Tietz <ktietz@redhat.com>
-
- * dw2gencfi.c (dwcfi_seg_list): New struct.
- (dwcfi_hash): New static hash variable.
- (get_debugseg_name): New.
- (alloc_debugseg_item): New.
- (make_debug_seg): New.
- (dwcfi_hash_insert): New.
- (dwcfi_hash_find): New.
- (dwcfi_hash_find_or_make): New.
- (cfi_insn_data): New member cur_seg.
- (cie_entry): Likewise.
- (fde_entry): New cseg and handled members.
- (alloc_fde_entry): Initialize cseg member.
- (alloc_cfi_insn_data): Initialize cur_seg member.
- (dot_cfi_sections): Compare for beginning of
- section names via strncmp.
- (get_cfi_seg): New.
- (cfi_finish): Treat link-once sections.
- (is_now_linkonce_segment): New local helper.
- (output_cie): Ignore cie entries not member of current
- segment.
- (output_fde): Likewise.
- (select_cie_for_fde): Likewise.
- (cfi_change_reg_numbers): Add new argument for current segment
- and ignore insn elements, if not part of current segment.
- * ehopt.c (get_cie_info): Use strncmp for
- section name matching.
- (heck_eh_frame): Likewise.
-
-2011-04-20 Catherine Moore <clm@codesourcery.com>
- David Ung <davidu@mips.com>
-
- * config/mips.c (mips_cl_insn): Add new field complete_p.
- (create_insn): Initialize complete_p to zero.
- (BASE_REG_EQ): New.
- (fix_24k_align_to): New.
- (fix_24k_store_info): Declare.
- (fix_24k_sort): New.
- (fix_24k_record_store_info): New.
- (nops_for_24k): New.
- (nops_for_insn): Call nops_for_24k.
- (append_insn): Move O_constant expression handling.
-
-2011-04-20 Alan Modra <amodra@gmail.com>
-
- * hash.c (set_gas_hash_table_size): Use bfd_hash_set_default_size.
- (hash_new_sized): New function, split out from..
- (hash_new): ..here.
-
-2011-04-19 Nick Clifton <nickc@redhat.com>
-
- * config/tc-arm.c (v7m_psrs): Revert previous delta.
-
-2011-04-18 Julian Brown <julian@codesourcery.com>
- Nick Clifton <nickc@redhat.com>
-
- * config/tc-arm.c (parse_psr): Use selected_cpu not cpu_variant to
- detect M-profile targets.
- (do_t_swi): Exclude v7 and higher variants from arm_ext_os test.
- (v7m_psrs): Fix typo: basepri_max should be basepri_mask.
-
-2011-04-14 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
-
- * config/tc-s390.c (s390_machine): New prototype.
- (md_pseudo_table): New pseudo-op .machine.
- (s390_opcode_hash): Initialize to NULL.
- (s390_parse_cpu): New function.
- (md_parse_option): Use s390_parse_cpu.
- (s390_setup_opcodes): New function.
- (md_begin): Use s390_setup_opcodes.
- (s390_machine): New hook handling the new .machine pseudo.
-
- * doc/c-s390.texi: Document the new pseudo op .machine.
-
-2011-04-12 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (i386_mach): Start error message with lower
- case.
- (md_begin): Likewise.
- (md_parse_option): Likewise.
- (i386_target_format): Likewise.
- (check_byte_reg): Likewise.
- (check_long_reg): Likewise.
- (check_qword_reg): Likewise.
- (check_word_reg): Likewise.
-
-2011-04-12 Nick Clifton <nickc@redhat.com>
-
- PR gas/12532
- * config/tc-arm.c (relax_branch): Do not relax branches to
- preemptable global symbols.
-
-2011-04-11 Julian Brown <julian@codesourcery.com>
-
- * config/tc-arm.c (parse_psr): Add LHS argument. Improve support
- for *APSR bitmasks.
- (operand_parse_code): Replace OP_PSR with OP_wPSR and OP_rPSR.
- Remove OP_RVC_PSR.
- (parse_operands): Likewise.
- (do_mrs): Tweak error message for constraint.
- (do_t_mrs): Update constraints for changes to APSR support.
- (do_t_msr): Likewise. Don't set PSR_f flag here.
- (psrs): Remove "g", "nzcvq", "nzcvqg".
- (insns): Tweak entries for msr and mrs instructions.
-
-2011-04-11 Kai Tietz <ktietz@redhat.com>
-
- * config/tc-i386.c (x86_cons): Initialize adjust with zero.
-
-2011-04-11 Nick Clifton <nickc@redhat.com>
-
- * config/tc-i386.c (x86_cons): Define even for non-ELF targets.
- * config/tc-i386.h (x86_cons): Always prototype.
-
- * config/tc-cr16.c (getprocregp_image): Fix type of 'r' parameter
- in order to avoid a compile time warning.
- (getprocreg_image): Likewise.
-
-2011-04-11 Alan Modra <amodra@gmail.com>
-
- * config/tc-cr16.c (getprocreg_image): Correct range check.
- (getprocregp_image): Likewise.
-
-2011-04-06 Joseph Myers <joseph@codesourcery.com>
-
- * configure.tgt (strongarm*be, strongarm*b, strongarm*,
- xscale*be|xscale*b, xscale*): Remove architectures.
- (thumb-*-coff, thumb-*-rtems*, thumb-*-elf, thumb-epoc-pe,
- thumb-*-pe, xscale-*-coff, xscale-*-elf): Remove targets.
-
-2011-04-01 Tristan Gingold <gingold@adacore.com>
-
- * config/tc-ia64.c (md_apply_fix): Add a cast to avoid a warning.
-
-2011-03-31 Bernd Schmidt <bernds@codesourcery.com>
-
- * config/tc-tic6x.c (sbss_section, scom_section, scom_symbol): New
- static variables.
- (md_begin): Initialize them.
- (s_tic6x_scomm): New static function.
- (md_pseudo_table): Add "scomm".
- (tc_gen_reloc): Really undo all adjustments made by
- bfd_install_relocation.
- * doc/c-tic6x.texi: Document the .scomm directive.
-
-2011-03-31 Tristan Gingold <gingold@adacore.com>
-
- * dwarf2dbg.c (DWARF2_VERSION): Define.
- (out_debug_line): Use it.
- (out_debug_aranges): Ditto.
- (out_debug_info): Ditto.
- * config/tc-ia64.h (DWARF2_VERSION): Override it.
-
-2011-03-30 Michael Snyder <msnyder@vmware.com>
-
- * obj-elf.c (obj_elf_section): Free malloced name.
- * macro.c (get_any_string): Free malloced br_buf.
- (do_formals): Free 'formal'.
-
-2011-03-30 Tristan Gingold <gingold@adacore.com>
-
- * config/tc-ppc.c (ppc_frob_symbol): Convert stsym symbols value
- to offset only if within is set.
- (ppc_stabx): Reformat. For stsym stabs, add a check and set
- within only for symbols.
-
-2011-03-29 Richard Henderson <rth@redhat.com>
-
- PR 12610
- * config/tc-alpha.c (s_alpha_align): Don't auto-align a previous
- label; zap alpha_insn_label.
-
-2011-03-29 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (handle_quad): Properly handle multiple
- operands.
-
-2011-03-29 Mike Frysinger <vapier@gentoo.org>
-
- * config/bfin-parse.y (BYTEUNPACK): Return yyerror when dest
- reg $2 is the same as dest reg $4.
-
-2011-03-29 Mike Frysinger <vapier@gentoo.org>
-
- * config/bfin-parse.y (BYTEOP16M): Return yyerror when dest
- reg $2 is the same as dest reg $4.
-
-2011-03-29 Mike Frysinger <vapier@gentoo.org>
-
- * config/bfin-parse.y (BYTEOP16P): Return yyerror when dest
- reg $2 is the same as dest reg $4.
-
-2011-03-28 Mike Frysinger <vapier@gentoo.org>
-
- * config/bfin-parse.y (16bit acc add): Return yyerror when dest
- reg $1 is the same as dest reg $7.
-
-2011-03-28 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (handle_quad): New.
- (md_pseudo_table): Add "quad".
-
-2011-03-26 John Marino <binutils@marino.st>
-
- * configure.tgt: Fix support for *-*-dragonfly*.
- * config/tc-i386.c: define SVR4_COMMENT_CHARS for dragonfly.
- * config/te-dragonfly.h: New file.
-
-2011-03-24 Eric B. Weddington <eric.weddington@atmel.com>
-
- * config/tc-avr.c (mcu_types): Add new devices: atmega325pa,
- atmega3250pa, atmega3290pa, atmega16hvbrevb, atmega32hvbrevb,
- at90pwm161.
- * doc/c-avr.texi: Document new device names.
-
-2011-03-24 Mike Frysinger <vapier@gentoo.org>
-
- * config/bfin-parse.y (dual 32bit add/sub): Return yyerror when dest
- reg $1 is the same as dest reg $7.
- (quad 16bit add/sub): Return yyerror when dest reg $1 is the same as
- dest reg $7.
-
-2011-03-24 Mike Frysinger <vapier@gentoo.org>
-
- * config/bfin-parse.y (check_macfuncs): Clarify error message when
- P is mismatched. Check destination regno are off by one when P is
- set, or are equal when P is not set.
-
-2011-03-23 Mike Frysinger <vapier@gentoo.org>
-
- * config/bfin-parse.y (SEARCH): Return yyerror when dest reg $2 is
- the same as dest reg $4.
- (BITMUX): Return yyerror when dest reg $3 is the same as dest reg $5.
-
-2011-03-23 Eric B. Weddington <eric.weddington@atmel.com>
-
- * config/tc-avr.c (mcu_types): Add new xmega devices: atxmega64a1u,
- atxmega128a1u, atxmega16x1, atxmega32x1, atxmega128b1, atxmega256a3bu.
- * doc/c-avr.texi: Document new device names.
-
-2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
-
- * config/tc-avr.c (struct avr_opcodes_s): Add opcode field.
- (AVR_INSN): Change definition to match.
- (avr_opcodes): Likewise, change to match.
- (mcu_types): Add XMEGA architecture names and new XMEGA device names.
- (md_show_usage): Add XMEGA architecture names.
- (avr_operand): Add 'E' constraint for DES instruction of XMEGA devices.
- Add support for SPM Z+ instruction.
- * doc/c-avr.texi: Add documentation for XMEGA architectures and
- devices.
-
-2011-03-21 Eric B. Weddington <eric.weddington@atmel.com>
-
- * config/tc-avr.c (md_show_usage): Add "Assembler" text to output.
-
-2011-03-18 Alan Modra <amodra@gmail.com>
-
- * config/obj-elf.c (elf_frob_symbol): Report S_SET_SIZE symbol
- on .size expression errors rather than symbols in the size expression.
-
-2011-03-18 Alan Modra <amodra@gmail.com>
-
- * input-scrub.c (line_numberT): Delete.
- (input_scrub_close): Reset line counters.
- * messages.c (as_show_where): Don't print invalid line number.
- (as_warn_internal, as_bad_internal): Likewise.
-
-2011-03-18 Alan Modra <amodra@gmail.com>
-
- * read.c (read_a_source_file): Remove md_after_pass_hook.
- Move "quit" label before set of dot_symbol.
- * config/tc-d10v.h (md_after_pass_hook): Don't define.
- * config/tc-d30v.h (md_after_pass_hook): Likewise.
- * config/tc-m32r.h (md_after_pass_hook): Likewise.
- (md_cleanup): Define to call m32r_fill_insn.
-
-2011-03-18 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
-
- * config/tc-s390.c (md_parse_option): Add -march=all option which
- switches to the highest available CPU.
-
-2011-03-17 Alan Modra <amodra@gmail.com>
-
- PR 12569
- * expr.c (operand): Correct passing of "mode" to expr.
- * read.c (do_org): Allow expr_section.
- (get_known_segmented_expression): Don't assert anything about the
- segment.
-
-2011-03-16 H.J. Lu <hongjiu.lu@intel.com>
-
- * as.c (show_usage): Add --size-check=.
- (parse_args): Add and handle OPTION_SIZE_CHECK.
-
- * as.h (flag_size_check): New.
-
- * config/obj-elf.c (elf_frob_symbol): Use as_bad to report
- bad .size directive only for --size-check=error.
-
- * doc/as.texinfo: Document --size-check=.
-
-2011-03-14 Mike Frysinger <vapier@gentoo.org>
-
- * config/tc-bfin.c (bfin_cpus[]): Add 0.4 for
- bf542/bf544/bf547/bf548/bf549.
-
-2011-03-14 Richard Sandiford <richard.sandiford@linaro.org>
-
- * config/tc-arm.c (md_pcrel_from_section): Use S_FORCE_RELOC to
- determine whether a relocation is needed.
- (md_apply_fix, arm_apply_sym_value): Likewise.
-
-2011-03-14 Richard Sandiford <richard.sandiford@linaro.org>
-
- * config/tc-arm.c (arm_adjust_symtab): Set the branch type
- for Thumb symbols.
-
-2011-03-11 Nick Clifton <nickc@redhat.com>
-
- * remap.c (remap_debug_filename): Always allocate a buffer for the
- returned pointer.
- * stabs.c (stabs_generate_asm_file): Free the pointer returned by
- remap_debug_filename.
-
-2011-03-10 Michael Snyder <msnyder@vmware.com>
-
- Revert the following change:
- * dwarf2dbg.c (out_file_list): Free malloced 'dir'.
- (out_debug_info): Free malloced 'dirname' and 'comp_dir'.
-
-2011-03-10 Alan Modra <amodra@gmail.com>
-
- * gas/config/obj-elf.h (ELF_TARGET_SYMBOL_FIELDS,
- TARGET_SYMBOL_FIELDS): Don't define.
- * gas/config/tc-arc.c (arc_common): Use correct symbol "local" field.
-
-2011-03-09 Michael Snyder <msnyder@vmware.com>
-
- * dwarf2dbg.c (out_file_list): Free malloced 'dir'.
- (out_debug_info): Free malloced 'dirname' and 'comp_dir'.
- (emit_fixed_inc_line_addr): Assign instead of conditional in
- assert.
-
-2011-03-05 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/obj-elf.c (elf_frob_symbol): Mention symbol name in
- non-constant .size expression.
-
-2011-03-02 Nick Clifton <nickc@redhat.com>
-
- * ecoff.c: Incldue filenames.h
-
-2011-02-28 Kai Tietz <kai.tietz@onevision.com>
-
- * depend.c (register_dependency): Use filename_(n)cmp.
- * dwarf2dbg.c (get_filenum): Likewise.
- * ecoff.c (add_file): Likewise.
- (ecoff_generate_asm_lineno): Likewise.
- * input-scrub.c (new_logical_line_flags): Likewise.
- * listing.c (file_info): Likewise.
- (listing_newline): Likewise.
- * remap.c (remap_debug_filename): Likewise.
- * stabs.c (generate_asm_file): Likewise.
- (stabs_generate_asm_lineno): Likewise.
-
-2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
-
- * config/tc-mips.c (append_insn): Disable branch relaxation for
- DSP instructions.
-
-2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
-
- * config/tc-mips.c (macro): Handle M_PREF_AB.
-
-2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
-
- * config/tc-mips.c (RELAX_BRANCH_ENCODE): Encode the temporary
- register to use.
- (RELAX_BRANCH_UNCOND): Adjust accordingly.
- (RELAX_BRANCH_LIKELY): Likewise.
- (RELAX_BRANCH_LINK): Likewise.
- (RELAX_BRANCH_TOOFAR): Likewise.
- (RELAX_BRANCH_AT): New macro.
- (append_insn): Encode the temporary register to use in standard
- MIPS branch relaxation.
- (relaxed_branch_length): Update according to changes to
- RELAX_BRANCH_ENCODE.
- (md_convert_frag): Use the encoded register as the temporary.
-
-2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
-
- * config/tc-mips.c (mips_fix_adjustable): On REL targets also
- reject PC-relative relocations.
-
-2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
-
- * config/tc-mips.c (md_convert_frag): Correct message
- capitalization.
-
-2011-02-28 Alan Modra <amodra@gmail.com>
-
- * symbols.c (report_op_error): Remove unnecessary forward declaration.
- Add "op" parameter. Report operator and operand segments in error
- message, not operand symbols.
- (resolve_symbol_value): Always set segment for equated symbols, not
- just when finalizing. Adjust report_op_error calls.
-
-2011-02-25 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (reloc): Don't sign-check 4-byte relocations
- if 64bit relocations aren't allowed.
-
-2011-02-25 Alan Modra <amodra@gmail.com>
-
- PR gas/12519
- * config/obj-elf.c (elf_frob_symbol): Properly handle size expression.
-
-2011-02-21 Maciej W. Rozycki <macro@codesourcery.com>
-
- * config/tc-mips.c (mips_ip) <'o'>: Remove duplicate
- initialization of offset_reloc.
-
-2011-02-15 Richard Henderson <rth@redhat.com>
-
- * dw2gencfi.c (dot_cfi_dummy): New.
- (cfi_pseudo_table) [!TARGET_USE_CFIPOP]: New.
- * read.c (pobegin): Unconditionally call cfi_pop_insert.
-
-2011-02-13 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
-
- * configure: Regenerate.
-
-2011-02-13 Mike Frysinger <vapier@gentoo.org>
-
- * config/bfin-lex.l (BYTEOP2M): Remove tokenization.
- * config/bfin-parse.y (BYTEOP2M): Delete token.
- (asm_1): Remove BYTEOP2M insn matching.
-
-2011-02-12 Mike Frysinger <vapier@gentoo.org>
-
- * config/bfin-defs.h: Include opcode/bfin.h.
- (M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2, M_IH, M_IU): Delete.
-
-2011-02-11 Mike Frysinger <vapier@gentoo.org>
-
- * doc/c-bfin.texi (Instruction Delimiting): Fix occur typo.
- (Modify Registers): Fix subtracted typo.
- (.byte2): Extend and swap descriptions with .byte4.
- (.byte4): Extend and swap descriptions with .byte2.
- (.db, .dw, .dd): Document behavior.
-
-2011-02-11 Mike Frysinger <vapier@gentoo.org>
-
- * config/bfin-parse.y (TESTSET): Reject REG_SP and REG_FP.
-
-2011-02-11 Alan Modra <amodra@gmail.com>
-
- * doc/c-ppc.texi (PowerPC-Opts <-nops>): Clarify.
-
-2011-02-10 Alan Modra <amodra@gmail.com>
-
- * doc/as.texinfo (Overview): Add missing markup around Blackfin
- and PowerPC options.
-
-2011-02-10 Alan Modra <amodra@gmail.com>
-
- * config/tc-ppc.c (md_show_usage): Remove -l and -b. Add -K PIC.
- * doc/as.texinfo: Refer to and include c-ppc.texi for PowerPC options.
- (Overview <Target PowerPC options>): Add a number of missing options.
- * doc/c-ppc.texi: Likewise. Add markup for use in manpage generation.
-
-2011-02-08 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/6957
- * config/tc-i386.c (i386_align_code): Use f32_patt when tuning
- for i686.
-
-2011-02-08 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (set_cpu_arch): Also update cpu_arch_isa_flags
- for ISA extensions.
- (md_parse_option): Likewise.
-
-2011-02-04 Bernd Schmidt <bernds@codesourcery.com>
-
- * doc/as.texinfo (Target TIC6X options): Don't mention "-matomic".
- * doc/c-tic6x.texi (TIC6X Directives): Don't mention ".atomic".
- (TIC6X Options): Don't mention "-matomic".
- * config/tc-tic6x.c (OPTION_MATOMIC, OPTION_MNO_ATOMIC): Delete.
- (md_longopts): Remove corresponding entries.
- (md_parse_option): Don't handle them.
- (md_show_usage): Don't document them.
- (tic6x_atomic): Delete variable.
- (tic6x_update_features): Always copy tic6x_arch_enable to
- tic6x_features.
- (tic6x_arch_enable): Remove references to TIC6X_INSN_ATOMIC.
- (s_tic6x_atomic, s_tic6x_noatomic): Remove functions.
- (md_pseudo_table): Remove ".atomic" and ".noatomic".
-
-2011-01-31 Nick Clifton <nickc@redhat.com>
-
- * write.c (write_contents): Include output file name and bfd error
- value when reporting the inability to write to the output file.
- * config/tc-rx.c (rx_handle_align): Do not insert NOPs into align
- frag that has a non-zero fill value.
-
-2011-01-27 DJ Delorie <dj@redhat.com>
-
- * config/tc-rx.c (md_convert_frag): If we can't compute the target
- address, zero out the values stored in the object file to make
- objdump's output consistent.
-
-2011-01-26 Kai Tietz <kai.tietz@onevision.com>
-
- * config/tc-i386.c (md_begin): Set for x64 windows COFF target
- x86_dwarf2_return_column to 32.
-
-2011-01-20 Nick Clifton <nickc@redhat.com>
-
- PR gas/12384
- * config/tc-h8300.c (constant_fits_width_p): Use correct type for
- comparison.
-
-2011-01-18 H.J. Lu <hongjiu.lu@intel.com>
-
- * write.c (compress_debug): Return if section size is smaller
- than 32 bytes.
-
-2011-01-18 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/12409
- * write.c (compress_debug): Return if section size is 0.
-
-2011-01-18 Mingfeng Wu <mingfeng@faraday-tech.com>
-
- * config/tc-arm.c (arm_cpus): Add Faraday ARMv5TE compatible
- cores: fa606te, fa616te, fmp626. Modify the VFP of fa626te.
- * doc/c-arm.texi (ARM Options): Add -mcpu={fa606te, fa616te,
- fmp626} options.
-
-2011-01-18 Nick Clifton <nickc@redhat.com>
-
- PR gas/12390
- * doc/all.texi: Add NS32K
- * doc/as.texinfo: Remove target specific details of which
- characters act as comment initiators and statement separators into
- individual target specific files.
- * doc/c-alpha.texi (Alpha-Chars): Document special behaviour of
- the hash character at the start of a line.
- * doc/c-arm.texi (ARM-Chars): Likewise.
- * doc/c-avr.texi (AVR-Chars): Likewise.
- * doc/c-d10v.texi (D10V-Chars): Likewise.
- * doc/c-d30v.texi (D30V-Chars): Likewise.
- * doc/c-mmix.texi (MMIX-Chars): Likewise.
- * doc/c-s390.texi (s390 characters): Likewise.
- * doc/c-sh.texi (SH-Chars): Likewise.
- * doc/c-sh64.texi (SH64-Chars): Likewise.
- * doc/c-sparc.texi (SPARC-Chars): Likewise.
- * doc/c-tic6x.texi (TIC6X Syntax): Likewise.
- * doc/c-xtensa.texi (Xtensa Syntax): Likewise.
- * doc/c-z80.texi (Z80-Chars): Likewise.
- * doc/c-z8k.texi (Z8000-Chars): Likewise.
- * doc/c-pdp11.texi (PDP11-Syntax): Document line separator character.
- * doc/c-arc.texi (ARC-Chars): Fill in this subsection.
- * doc/c-bfin.texi (Blackfin Syntax): Document line comment and
- line separator characters.
- * doc/c-cr16.texi (CR16 Syntax): Likewise.
- * doc/c-i386.texi (i386-Chars): Likewise.
- * doc/c-i860.texi (i860-Chars): Likewise.
- * doc/c-i960.texi (i960-Chars): Likewise.
- * doc/c-ip2k.texi (IP2K-Chars): Likewise.
- * doc/c-lm32.texi (LM32-Chars): likewise.
- * doc/c-m32c.texi (M32C-Chars): Likewise.
- * doc/c-m68hc11.texi (M68HC11-syntax): Likewise.
- * doc/c-m68k.texi (M68K-Chars): Likewise.
- * doc/c-microblaze.texi (MicroBlaze-Chars): Likewise.
- * doc/c-msp430.texi (MSP430-Chars): Likewise.
- * doc/c-mt.texi (MT-Chars): Likewise.
- * doc/c-ns32k.texi (NS32K-Chars): Likewise.
- * doc/c-pj.texi (PJ-Chars): Likewise.
- * doc/c-ppc.texi (PowerPC-Chars): Likewise.
- * doc/c-rx.texi (RX-Chars): Likewise.
- * doc/c-score.texi (SCORE-Chars): Likewise.
- * doc/c-tic54x.texi (TIC54X-Chars): Likewise.
- * doc/c-v850.texi (V850-Chars): Likewise.
- * doc/c-vax.texi (VAX-Chars): Likewise.
- * doc/c-xc16x.texi (xc16x-Chars): Likewise.
-
-2011-01-17 Quentin Neill <quentin.neill@amd.com>
-
- * config/tc-i386.c (cpu_arch): Add CPU_TBM_FLAGS.
-
- * doc/c-i386.texi (i386-TBM): New section.
-
-2011-01-16 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (disallow_64bit_disp): Renamed to ...
- (disallow_64bit_reloc): This.
- (md_assemble): Don't check movabs for x32 mode here.
- (i386_target_format): Updated.
- (tc_gen_reloc): Check if 64bit relocations are allowed.
-
-2011-01-15 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (disallow_64bit_disp): New.
- (x86_elf_abi): Replace X86_64_LP64_ABI/X86_64_ILP32_ABI with
- X86_64_ABI/X86_64_X32_ABI.
- (md_assemble): Don't allow movabs with relocation in x32 mode.
- (i386_target_format): Updated.
-
-2011-01-14 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (OPTION_N32): Renamed to ...
- (OPTION_X32): This.
- (md_longopts): Replace n32 with x32.
- (md_parse_option): Updated.
- (md_show_usage): Likewise.
-
- * doc/c-i386.texi: Replace --n32 with --x32.
-
-2011-01-11 Mingjie Xing <mingjie.xing@gmail.com>
-
- * config/tc-mips.c (mips_ip): Update error messages. Take an
- unadjusted offset for "+c" argument.
-
-2011-01-10 Nick Clifton <nickc@redhat.com>
-
- * config/tc-i386.c (x86_elf_abi): Only define for targets that use
- it.
-
-2011-01-10 Nick Clifton <nickc@redhat.com>
-
- * config/tc-arm.c (s_arm_tls_desceq): Move code into ELF-only
- part of the file.
-
-2011-01-10 Nathan Sidwell <nathan@codesourcery.com>
- Glauber de Oliveira Costa <glommer@gmail.com>
-
- * doc/c-arm.texi: Document TLSDESC and TLSCALL relocations, and
- .tlsdescseq directive.
- * config/tc-arm.c (arm_typed_reg_parse): Check for potential reloc
- following a symbol.
- (s_arm_tls_descseq): New directive.
- (md_pseudo_table): Add it.
- (encode_branch): Allow TLS_CALL relocs too.
- (do_t_blx, do_t_branch23): Use encode_branch.
- (reloc_names): Add tlsdesc and tlscall.
- (md_apply_fix): Process tls desc relocations.
- (tc_gen_reloc): Likewise.
- (arm_fix_adjustable): Likewise.
-
-2011-01-07 Quentin Neill <quentin.neill@amd.com>
-
- * config/tc-i386.c (cpu_arch): Add CPU_BMI_FLAGS.
-
- * doc/c-i386.texi (i386-BMI): New section.
-
-2011-01-06 Paul Koning <ni1d@arrl.net>
-
- * config/tc-pdp11.c (parse_op_no_deferred): Allow PC-relative
- references to absolute addresses.
-
-2011-01-05 DJ Delorie <dj@redhat.com>
-
- * config/tc-rx.c (tc_gen_reloc): Emit an RX_OP_NEG expression
- instead of an RH_NEG32 one.
-
-2011-01-05 Jonathan Wakely <jwakely.gcc@gmail.com>
-
- * doc/c-i386.texi: Clarify --n32.
-
-2011-01-04 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (build_modrm_byte): Allow encoding 32/64bit
- integer registers in VEX.vvvv. Check register-only source
- operand when two source operands are swapped. Properly update
- destination when two source operands are swapped.
-
-2011-01-01 H.J. Lu <hongjiu.lu@intel.com>
+For older changes see ChangeLog-2012
+\f
+Copyright (C) 2013 Free Software Foundation, Inc.
- * gas.c (parse_args): Update copyright to 2011.
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.
-For older changes see ChangeLog-2010
-\f
Local Variables:
mode: change-log
left-margin: 8