+2005-09-29 Jan Beulich <jbeulich@novell.com>
+
+ * config/tc-ia64.c (parse_operands): Always parse first operand of
+ alloc.
+
+2005-09-29 Arnold Metselaar <arnold.metselaar@planet.nl>
+ Alan Modra <amodra@bigpond.net.au>
+
+ * app.c (do_scrub_chars): Match open and close quote of strings.
+ Remove redundant EOF test in case 7.
+
+2005-09-28 Jan Beulich <jbeulich@novell.com>
+
+ * config/tc-i386.c (reloc): Disable signedness check for 4-byte
+ relocations in 16- and 32-bit modes.
+ (i386_displacement): Make pc-relative branch handling dependent
+ upon operand (rather than address) size.
+
+2005-09-28 Jan Beulich <jbeulich@novell.com>
+
+ * dw2gencfi.c (dot_cfi): Call ignore_rest_of_line when not fully
+ parsing the input.
+ (dot_cfi_startproc): Likewise.
+ (dot_cfi_endproc): Likewise. Also check no extra input was given.
+ (dot_cfi_escape): Likewise.
+
+2005-09-28 Jan Beulich <jbeulich@novell.com>
+
+ * config/tc-i386.h (x86_cons_fix_new): Declare unconditionally.
+ (TC_CONS_FIX_NEW): Define unconditionally.
+ (x86_pe_cons_fix_new): Remove.
+ * config/tc-i386.c (signed_cons): New.
+ (md_pseudo_table): Add slong.
+ (x86_cons_fix_new): Declare unconditionally.
+ (x86_pe_cons_fix_new): Merge into x86_cons_fix_new.
+ (tc_gen_reloc): Also consider BFD_RELOC_X86_64_32S for gotpc
+ conversion.
+
+2005-09-28 Arnold Metselaar <arnold.metselaar@planet.nl>
+
+ * app.c (do_scrub_chars <LEX_IS_SYMBOL_COMPONENT>): Check for full
+ buffer after copying string.
+
+2005-09-27 Paul Brook <paul@codesourcery.com>
+
+ * config/arm.c (arm_cpus): Add more cpu names.
+ * doc/c-arm.texi: Document them.
+
+2005-09-21 Alan Modra <amodra@bigpond.net.au>
+
+ * read.c (pseudo_set): Don't set undefined symbols to expr_section.
+
+2005-09-20 Richard Henderson <rth@redhat.com>
+
+ * dwarf2dbg.c (process_entries): Fix uninitialized variable warning.
+
+2005-09-20 Richard Henderson <rth@redhat.com>
+
+ * dwarf2dbg.c (struct line_entry): Replace frag and frag_ofs
+ with label.
+ (dwarf2_loc_mark_labels): New.
+ (dwarf2_gen_line_info_1): Split out of ...
+ (dwarf2_gen_line_info): ... here. Create the temp symbol here.
+ (dwarf2_emit_label): New.
+ (dwarf2_directive_loc_mark_labels): New.
+ (out_set_addr): Take a symbol instead of frag+ofs.
+ (relax_inc_line_addr): Likewise.
+ (emit_inc_line_addr): Assert delta non-negative.
+ (process_entries): Remove dead code. Update to work with temp
+ symbols instead of frag+ofs.
+ * dwarf2dbg.h (dwarf2_directive_loc_mark_labels): Declare.
+ (dwarf2_emit_label, dwarf2_loc_mark_labels): Declare.
+ * config/obj-elf.c (elf_pseudo_tab): Add loc_mark_labels.
+ * config/obj-elf.h (obj_frob_label): New.
+ * config/tc-alpha.c (alpha_define_label): Call dwarf2_emit_label.
+ * config/tc-arm.c, config/tc-hppa.c, config/tc-m68k.c,
+ config/tc-mips.c, config/tc-ppc.c, config/tc-sh.c, config/tc-xtensa.c:
+ Similarly in the respective tc_frob_label implementation functions.
+ * config/tc-i386.c (md_pseudo_table): Move file and loc to
+ non-elf section; add loc_mark_labels.
+ * config/tc-ia64.c (struct label_fix): Add dw2_mark_labels.
+ (ia64_flush_insns): Check for marked labels; emit line entry if so.
+ (emit_one_bundle): Similarly.
+ (ia64_frob_label): Record marked labels.
+ * config/tc-m68hc11.h (tc_frob_label): Remove.
+ * config/tc-ms1.c (md_pseudo_table): Remove file and loc.
+ * config/tc-sh.h (tc_frob_label): Pass sym to sh_frob_label.
+ * config/tc-sh64.h (tc_frob_label): Likewise.
+ * doc/as.texinfo (LNS directives): Docuement .loc_mark_blocks.
+
+2005-09-20 Alan Modra <amodra@bigpond.net.au>
+
+ * read.c (pseudo_set): Set segment of expression syms to expr_section.
+
+2005-09-14 Jan Beulich <jbeulich@novell.com>
+
+ * config/tc-i386.c (tc_x86_regname_to_dw2regnum): Add selector
+ registers, floating point control and status words, and mxcsr as
+ well as (for 64-bit code) segment base registers and rflags.
+
+2005-09-09 Dmitry Diky <diwil@spec.ru>
+
+ * config/tc-msp430.c (msp430_operands): Undo last changes. Instead...
+ (msp430_relax_frag): add a guard check to ensure that final fr_subtype
+ has been reached.
+
+2005-09-08 Chao-ying Fu <fu@mips.com>
+
+ * doc/as.texinfo: Document -mdsp and -mno-dsp options.
+ * doc/c-mips.texi: Likewise, and document ".set dsp" and ".set nodsp"
+ directives.
+
+2005-09-08 Paul Brook <paul@codesourcery.com>
+
+ * config/tc-arm.c (do_smi, do_t_smi): Rename ...
+ (do_smc, do_t_smc): ... to this.
+ (insns): Remane smi to smc.
+ (md_apply_fix, tc_gen_reloc): Rename BFD_RELOC_ARM_SMI to
+ BFD_RELOC_ARM_SMC.
+
+2005-09-07 Richard Henderson <rth@redhat.com>
+
+ * dwarf2dbg.c (dwarf2_where): Set line->isa.
+ (dwarf2_set_isa): New.
+ (dwarf2_directive_loc): Rearrange to allow all options on one line.
+ * dwarf2dbg.h (dwarf2_set_isa): Declare.
+ * doc/as.texinfo: Update .loc documentation.
+
+2005-09-07 Richard Henderson <rth@redhat.com>
+
+ * dwarf2dbg.c: Include safe-ctype.h.
+ (DWARF2_LINE_OPCODE_BASE): Bump to 13.
+ (current): Initialize.
+ (dwarf2_emit_insn): Clear DWARF2_FLAG_BASIC_BLOCK,
+ DWARF2_FLAG_PROLOGUE_END, DWARF2_FLAG_EPILOGUE_BEGIN.
+ (dwarf2_directive_file): Cope with invalid filename.
+ (dwarf2_directive_loc): Add handling for basic_block, prologue_end,
+ epilogue_begin, is_stmt, isa.
+ (emit_inc_line_addr): Move line_delta == 0, addr_delta == 0 special
+ case down lower.
+ (process_entries): Handle isa, DWARF2_FLAG_PROLOGUE_END,
+ and DWARF2_FLAG_EPILOGUE_BEGIN.
+ (out_debug_line): Emit sizes for DW_LNS_set_prologue_end,
+ DW_LNS_set_epilogue_begin, DW_LNS_set_isa.
+ * dwarf2dbg.h (DWARF2_FLAG_IS_STMT): Rename from DWARF2_FLAG_BEGIN_STMT.
+ (DWARF2_FLAG_BASIC_BLOCK): Rename from DWARF2_FLAG_BEGIN_BLOCK.
+ (DWARF2_FLAG_PROLOGUE_END, DWARF2_FLAG_EPILOGUE_BEGIN): New.
+ (struct dwarf2_line_info): Add isa member.
+ * doc/as.texinfo (LNS directives): New node.
+
+2005-09-07 David Ung <davidu@mips.com>
+
+ * config/tc-mips.c (append_insn): Undo last change. Instead add
+ guard to suppress calling frag_grow if the current instruction is
+ one that allows a delay slot.
+
+2005-09-06 Chao-ying Fu <fu@mips.com>
+
+ * config/tc-mips.c (mips_set_options): Add ase_mt for MT instructions.
+ (mips_opts): Add -1 to initialize ase_mt.
+ (file_ase_mt): New variable for -mmt.
+ (CPU_HAS_MT): New define.
+ (validate_mips_insn): Add supports for +t, +T, !, $, *, &, g operand
+ formats.
+ (mips_ip): Check ase_mt to enable MT instructions.
+ Handle !, $, *, &, +T, +t, g operand formats.
+ For "mftc1", "mfthc1", "cftc1", "mttc1", "mtthc1", "cttc1", we allow
+ odd float registers.
+ (OPTION_MT, OPTION_NO_MT): New define.
+ (OPTION_COMPAT_ARCH_BASE): Change because of inserting MT define.
+ (md_parse_option): Parse OPTION_MT and OPTION_NO_MT.
+ (mips_after_parse_args): Set ase_mt based on CPU.
+ (s_mipsset): Handle ".set mt" and ".set nomt".
+ (mips_elf_final_processing): Remind of adding new flag for MT ASE.
+ (md_show_usage): Show usage of -mmt and -mno-mt.
+ * doc/as.texinfo: Document -mmt and -mno-mt options.
+ * doc/c-mips.texi: Likewise, and document ".set mt" and ".set nomt"
+ directives.
+
+2005-09-06 Paul Brook <paul@codesourcery.com>
+
+ * config/tc-arm.c (arm_it): Add relax field.
+ (T16_32_TAB): Add addi, addis, add_pc, add_sp, dec_sp, inc_sp,
+ b, bcond, ldr_pc, ldr_pc2, ldr_sp, str_sp, subi, subis.
+ (do_t_add_sub, do_t_addr, do_t_branch, do_t_ldst,
+ do_t_mov_cmp): Allow relaxation.
+ (output_relax_insn): New function.
+ (put_thumb32_insn): New function.
+ (output_inst): Use new functions.
+ (md_assemble): Don't throw error on relaxable instructions.
+ (insns): Change "b" entry from TCE(...) to tCE(...).
+ (md_estimate_size_before_relax): Return 2.
+ (md_convert_frag, relax_immediate, relax_adr, relax_addsub,
+ relax_branch, arm_relax_frag): New functions.
+ (arm_force_relocation): Return 0 for Thumb-2 immediate operand
+ relocations.
+ * config/tc-arm.h (md_convert_frag): Remove definition.
+ (md_relax_frag): Define.
+ (arm_relax_frag): Add prototype.
+
+2005-09-02 Paul Brook <paul@codesourcery.com>
+
+ * config/tc-arm.c (do_rn_rd): Enforce SWP operand constraints.
+
+2005-09-02 Paul Brook <paul@codesourcery.com>
+
+ * config/tc-arm.c (encode_arm_cp_address): Use
+ BFD_RELOC_ARM_T32_CP_OFF_IMM in thumb mode.
+ (do_iwmmxt_wldstbh): Use BFD_RELOC_ARM_T32_CP_OFF_IMM_S2 in thumb
+ mode.
+ (md_assemble): Only allow coprocessor instructions when Thumb-2 is
+ available.
+ (cCE, cC3): Define.
+ (insns): Use them for coprocessor instructions.
+ (md_pcrel_from_section): Handle BFD_RELOC_ARM_T32_CP_OFF_IMM.
+ (get_thumb32_insn): New function.
+ (put_thumb32_insn): New function.
+ (md_apply_fix): Handle BFD_RELOC_ARM_T32_CP_OFF_IMM and
+ BFD_RELOC_ARM_T32_CP_OFF_IMM_S2.
+
+2005-09-02 Paul Brook <paul@codesourcery.com>
+
+ * config/tc-arm.c (opcode_lookup): Look for infix opcode when
+ incorrect suffix matches.
+
+2005-09-01 David Ung <davidu@mips.com>
+
+ * config/tc-mips.c (append_insn): Correctly handle mips16 case
+ when the frags are different for the 2 instructions we want to
+ swap. If the lengths of the 2 instructions are not the same, we
+ won't do the swap but emit an nop.
+
+2005-09-01 Dmitry Diky <diwil@spec.ru>
+
+ * config/tc-msp430.c (msp430_operands): Emit dwarf2_emit_insn()
+ as appropriate. Change frag_variant() to frag_var() for relaxes.
+
2005-08-29 Nick Clifton <nickc@redhat.com>
* write.c (generic_force_reloc): Do not call S_FORCE_RELOC if
* config/tc-msp430.h (TC_FORCE_RELOCATION_LOCAL): Defined.
(msp430_force_relocation_local): Likewise.
* doc/c-msp430.texi: Describe new options.
-
+
2005-08-11 Ian Lance Taylor <ian@airs.com>
* Makefile.am ($(srcdir)/make-gas.com): Remove target.
* doc/as.texinfo: Add text for the M32C-specific options and line
comment characters, and refer to c-m32c.texi.
* doc/c-m32c.texi: New file.
-
+
2005-07-14 Nick Clifton <nickc@redhat.com>
PR 1069