+start-sanitize-tic80
+Fri Dec 12 11:44:20 1997 Fred Fish <fnf@cygnus.com>
+
+ * config/tc-tic80.c (build_insn): Handle instructions that have
+ long (32 bit) PC relative offsets. Fix places that previously
+ misused R_MPPCR for 15 bit offsets to use the new R_MPPCR15W type.
+ (md_apply_fix): Add case to handle long PC relative offsets.
+
+end-sanitize-tic80
+Fri Dec 12 10:35:01 1997 Nick Clifton <nickc@cygnus.com>
+
+ * doc/c-arm.texi (ARM Options): Document support for new ARM
+ processor names.
+
+ * config/tc-arm.c (md_parse_option): Add support for new ARM
+ processor names.
+
+Thu Dec 11 17:46:50 1997 Richard Henderson <rth@cygnus.com>
+
+ * config/tc-m68k.c (m68k_ip): Don't overwrite opcode table data.
+ (insop, m68k_ip): Make `opcode' const so it doesn't happen again.
+
+Fri Dec 5 11:23:59 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c (md_assemble): Fix BFD_RELOC_32 against a
+ symbol + offset.
+
+ * config/tc-v850.h (ELF_TC_SPECIAL_SECTIONS): Use
+ SHT_V850_{S|T|Z}COMMON to mark special common sections.
+
+Tue Dec 2 17:05:13 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c: Brought up to date with the branch.
+
+Mon Dec 1 20:24:18 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
+
+ * config/tc-sh.c (SWITCH_TABLE_CONS): Handle (fix)->fx_size == 1.
+ (SWITCH_TABLE): Handle BFD_RELOC_8.
+ (md_apply_fix): #ifndef BFD_ASSEMBLER code: Handle fixP->fx_size == 1.
+ (coff_reloc_map): Add BFD_RELOC_8_PCREL entry.
+ (sh_coff_reloc_mangle): SWITCH_TABLE case: Handle BFD_RELOC_8.
+
+Sat Nov 22 16:19:22 1997 Richard Henderson <rth@cygnus.com>
+
+ * tc-alpha.c (range_signed_16, range_signed_32): Work around an
+ apparent bug in gcc's long long support crossing from x86.
+
+Sat Nov 22 14:26:09 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-arm.c: Brought up to date with latest changes on arm
+ branch.
+
+Sat Nov 22 15:50:09 1997 Klaus Kaempf <kkaempf@progis.de>
+
+ * config-gas.com: Get version info from configure.in.
+
+ * makefile.vms: include depend.obj in OBJS.
+
+ * config/tc-alpha.c (s_alpha_section): Remove ".lcomm" handling.
+
+ * config/tc-alpha.c (alpha_basereg_clobbered): Remove variable and
+ all corresponding code.
+
+Thu Nov 20 15:06:08 1997 Richard Earnshaw <rearnsha@arm.com>
+
+ * config/tc-arm.h (TARGET_FORMAT for generic a.out targets): Allow
+ run-time endian selection.
+
+start-sanitize-sh4
+Wed Nov 19 17:44:42 1997 Richard Henderson <rth@cygnus.com>
+
+ * tc-sh.c (parse_reg): Properly quote for fv4.
+
+end-sanitize-sh4
+Wed Nov 19 23:46:18 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * symbols.c (resolve_symbol_value): Add missing breaks in case on
+ symbol value operator.
+
+start-sanitize-vr5400
+Wed Nov 19 02:24:07 1997 Ken Raeburn <raeburn@cygnus.com>
+
+ * config/tc-mips.c (gpr_interlocks, cop_interlocks): VR5400 has
+ these.
+
+end-sanitize-vr5400
+Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
+
+ * config/tc-d10v.c (parallel_ok, find_opcode):
+ Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
+
+Sun Nov 16 10:05:07 1997 Fred Fish <fnf@cygnus.com>
+
+ * config/obj-coff.c (fixup_segment): Cast second arg of
+ md_apply_fix3 call to type "valueT *".
+
+Thu Nov 13 13:53:10 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure.in (emulations): Make FreeBSD an aout / i386bsd
+ variant.
+ * configure: Re-generate.
+
+Thu Nov 13 11:07:14 1997 Gavin Koch <gavin@cygnus.com>
+
+ * config/tc-mips.c (macro_build): Use the membership field
+ for INSN_MACRO's.
+ (mips_ip): Same.
+
+Thu Nov 13 02:04:55 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
+
+ * config/tc-d10v.c (find_opcode): For OPCODE_FAKE, add check for
+ first argument if it's supposed to be a register.
+
+start-sanitize-tx49
+Wed Nov 12 10:06:27 1997 Gavin Koch <gavin@cygnus.com>
+
+ * config/tc-mips.c (mips_4900): Added.
+ (hilo_interlocks): Added mips_4900.
+ (md_begin): Set default for mips_4900.
+ (macro_build,mips_ip): Test for INSN_4900 if mips_4900.
+ (md_longopts): Add "m4900" and "no-m4900".
+ (md_parse_option): Handle above options.
+
+end-sanitize-tx49
+Tue Nov 11 19:25:05 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
+
+ * app.c (do_scrub_chars): If d10v, re-insert a space before
+ a '#' when in state 10.
+
Tue Nov 11 13:33:15 1997 Ian Lance Taylor <ian@cygnus.com>
* config/tc-h8300.c: Include "subsegs.h".
* config/tc-v850.c (.v850): New pseudo op.
start-sanitize-v850e
* config/tc-v850.c (.v850e): New pseudo op.
- * config/tc-v850.c (.v850eq): New pseudo op.
+ * config/tc-v850.c (.v850ea): New pseudo op.
end-sanitize-v850e
* config/tc-v850.c (v850_insert_operand): Add
-mwarn_unsigned_overflow.
(md_begin): Set BFD machine number based on machine variable.
- (md_parse_option): Add -mv850, -mv850e and -mv850eq options.
+ (md_parse_option): Add -mv850, -mv850e and -mv850ea options.
Mon Sep 8 11:20:46 1997 Ian Lance Taylor <ian@cygnus.com>
Mon Aug 18 11:24:21 1997 Nick Clifton <nickc@cygnus.com>
- * config/tc-v850.c: Remove support_v850eq flag and command line
+ * config/tc-v850.c: Remove support_v850ea flag and command line
option.
- * configure.in (emulations): Add support for v850eq target
+ * configure.in (emulations): Add support for v850ea target
- * configure (emulations): Add support for v850eq target
+ * configure (emulations): Add support for v850ea target
end-sanitize-v850e
Fri Aug 15 14:00:13 1997 Ian Lance Taylor <ian@cygnus.com>
start-sanitize-v850e
* config/tc-v850.c (md_assemble, md_show_usage, md_parse_option):
- Add support for v850eq instructions.
+ Add support for v850ea instructions.
* config/tc-v850.c (md_assemble, md_show_usage, md_parse_option):
Add support for v850e instructions.
projects / deliverable / binutils-gdb.git / blobdiff