+start-sanitize-v850
+Tue Oct 22 22:01:25 1996 Jeffrey A Law (law@cygnus.com)
+
+ * config/tc-v850.c (md_assemble): Handle TDAOFF relocs
+ differently for movea & sst/sld insns.
+
+end-sanitize-v850
+Tue Oct 22 17:09:32 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * config/tc-d10v.c (parallel_ok): Don't allow illegal combinations
+ of instructions.
+
+Tue Oct 22 11:28:39 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * obj.h (struct format_ops): Add frob_file_after_relocs field.
+ * config/obj-multi.h (obj_frob_file_after_relocs): Define.
+ * config/obj-ecoff.c (ecoff_format_ops): Initialize new
+ frob_file_after_relocs field.
+ * config/obj-elf.c (elf_format_ops): Likewise.
+ * config/tc-mips.c: Undefine obj_frob_file_after_relocs before
+ including obj-elf.h.
+
+Mon Oct 21 11:38:30 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/tc-mips.c (cons_fix_new_mips): Only treat 8 byte reloc
+ specially if not ELF.
+ (md_apply_fix): Handle BFD_RELOC_64.
+ (tc_gen_reloc): Handle BFD_RELOC_64.
+
+ * config/tc-i386.c (md_apply_fix3): Don't increment value for a PC
+ relative reloc when BFD_ASSEMBLER and OBJ_AOUT (more ugly gas
+ reloc hacking).
+
+ * config/obj-aout.h (S_IS_DEFINE): non BFD_ASSEMBLER version:
+ Don't check S_GET_OTHER.
+
+Fri Oct 18 14:06:26 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/tc-mips.c (mips_ip): Accept an odd floating point
+ register with l.s or s.s.
+
+ * config/obj-aout.c (obj_pseudo_table): Use obj_aout_type for
+ .type pseudo-op.
+ (obj_aout_type): New static function.
+
+Thu Oct 17 17:55:17 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in ($(OBJS)): Depend upon libiberty.h.
+
+start-sanitize-v850
+Wed Oct 16 11:28:31 1996 Jeffrey A Law (law@cygnus.com)
+
+ * config/tc-v850.c (v850_reloc_prefix): Recognize zdaoff, tdaoff
+ and sdaoff expressions.
+
+ * write.c (fixup_segment): Don't add symbol value to addend if
+ TC_V850 and OBJ_ELF.
+ * config/tc-v850.h (tc_fix_adjustable): Don't adjust any
+ pc-relative fixups.
+
+ * config/tc-v850.c (md_pcrel_from): Undo yesterday's changes.
+ (md_pcrel_from_section): Likewise.
+ * config/tc-v850.h (MD_PCREL_FROM_SECTION): Likewise.
+
+Tue Oct 15 23:19:00 1996 Jeffrey A Law (law@cygnus.com)
+
+ * config/tc-v850.c (md_pcrel_from): Delete unused function.
+ (md_pcrel_from_section): New function.
+ * config/tc-v850.h (MD_PCREL_FROM_SECTION): Define.
+
+end-sanitize-v850
+Mon Oct 14 13:59:12 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/tc-mips.c (load_register): Add cast to offsetT when using
+ a constant with &~.
+
+Mon Oct 14 11:24:28 1996 Richard Henderson <rth@tamu.edu>
+
+ * config/obj-elf.c (elf_frob_file): Move ECOFF debug processing to ...
+ (elf_frob_file_after_relocs): ... here. New function.
+ * config/obj-elf.h (obj_from_file_after_relocs): New macro.
+ * write.c (write_object_file): Call *frob_after_relocs after the
+ call to write_relocs.
+
+ * config/tc-alpha.c: Use new BFD_RELOC_ALPHA_ELF_LITERAL reloc.
+
+ * config/tc-alpha.c (load_expression): Don't SET_VALUE on the section
+ symbol, as this messes up linking. Instead, expand the recursive call
+ inline and change up the appropriate bits to get the 0x8000 offset
+ in the reloc addend.
+
+Thu Oct 10 17:30:31 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/tc-sparc.h (tc_fix_adjustable): Permit the difference of
+ two symbols in the same segment to be adjusted.
+
+ * configure.in: Don't get confused by CPU-VENDOR-linux-gnu.
+ * configure: Rebuild.
+
+Thu Oct 10 17:22:18 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * config/tc-ppc.c (ppc_insert_operand): Change most warnings into
+ errors.
+ (ppc_elf_validate_fix): Ditto.
+ (md_assemble): Ditto.
+ (ppc_tc): Ditto.
+ (ppc_pe_section): Ditto.
+ (ppc_frob_symbol): Ditto.
+
+Thu Oct 10 12:05:45 1996 Jeffrey A Law (law@cygnus.com)
+
+ * config/mn10300.c (md_assemble): Pass an extra shift count
+ to mn10300_insert_operand based on the opcode format.
+ (mn10300_insert_operand): Accept and use extra shift count
+ parameter.
+
+ * config/tc-mn10300.c (md_assemble): Use FMT_* macros for
+ formats rather than hard-coded constants.
+
+ * config/tc-mn10300.c (md_assemble): Format D5 instructions
+ are 7 bytes long. Write out instructions in big-endian format.
+
+Tue Oct 8 14:56:15 1996 Jeffrey A Law (law@cygnus.com)
+
+ * config/tc-mn10300.c (md_assemble): Tweak further so
+ that all instructions are parsed correctly.
+
+Tue Oct 8 13:02:21 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * as.h: Include libiberty.h.
+ (xmalloc, xrealloc): Don't declare.
+ * as.c: Don't include libiberty.h.
+ * expr.c, read.c, stabs.c, config/obj-coff.c: Likewise.
+ * config/tc-mips.c: Likewise.
+ * messages.c: Likewise.
+ (xstrerror): Don't declare.
+ * xmalloc.c: Remove.
+
+Mon Oct 7 16:53:23 1996 Jeffrey A Law (law@cygnus.com)
+
+ * config/tc-mn10300.h (pre_defined_registers) Remove.
+ (system_registers, cc_names): Likewise.
+ (address_registers, data_registers, other_registers): New register
+ arrays.
+ (register_name, system_register_name, cc_name): Remove.
+ (mn10300_reloc_prefix): Likewise.
+ (data_register_name): New function.
+ (address_register_name, other_register_name): Likewise.
+ (md_assemble): Rough cut at parsing operands. Remove lots of
+ unwanted code.
+ (md_apply_fix3): Disable for now.
+
+Mon Oct 7 11:38:34 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
+
+ * config/tc-m68k.c (select_control_regs): New function, extracted
+ out of m68k_init_after_args.
+ (m68k_init_after_args): Use it.
+ (mri_chip): Use it here as well to update set of allowed control
+ regs for movec.
+
+Mon Oct 7 11:24:29 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/obj-elf.c (elf_begin): New function.
+ (obj_elf_section): Add the section symbol to the symbol table.
+ * config/obj-elf.h (obj_begin): Define.
+ (elf_begin): Declare.
+ * as.c (perform_an_assembly_pass): Call obj_begin if it is
+ defined.
+
+Fri Oct 4 18:37:32 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/obj-coff.c (fixup_segment): Subtract the section address
+ from a PC relative reloc if TC_M68K.
+
+Thu Oct 3 15:15:30 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/tc-sparc.c (md_pseudo_table): Make .uahalf, .uaword, and
+ .uaxword available even if not OBJ_ELF.
+ (md_atof): Remove unused local variable wordP.
+
+Thu Oct 3 00:16:50 1996 Jeffrey A Law (law@cygnus.com)
+
+ * config/tc-mn10x00.c, config/tc-mn10x00.h: New files
+ for Matsushita MN10x00 support.
+ * configure.in: Recognize mn10x00-*-*
+ * configure: Rebuilt.
+
+Wed Oct 2 15:54:03 1996 Klaus Kaempf <kkaempf@progis.de>
+
+ * obj-evax.h: move openvms definitions from here to tc-alpha.c.
+ * tc-alpha.c: add support for vms_case_hack like in vax/vms.
+ (load_expression): track clobbering of base reg before jmp/jsr.
+ (s_alpha_file): pass case_hack flags and source filename via
+ symbol table to bfd.
+ * tc-alpha.h (TC_CONS_FIX_NEW): define
+
+Tue Oct 1 16:16:01 1996 Joel Sherrill <joel@oarcorp.com>
+
+ * configure.in (mips-*-rtems*): New target, like mips-*-elf*.
+ * configure: Rebuild.
+
+Tue Oct 1 12:37:48 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * read.c (s_macro): Warn if a macro has the same name as a
+ pseudo-op.
+ (s_space): In m68k MRI mode, align to a word boundary.
+ * macro.c (define_macro): Add namep parameter. Change all
+ callers.
+ * macro.h (define_macro): Update declaration.
+
+ * as.c (show_usage): Print bug report address.
+ (parse_args): Change version printing to match current GNU
+ standards.
+ * gasp.c (show_usage): Print bug report address.
+ (main): Change version printing to match current GNU standards.
+
+ * config/tc-m68k.c (init_table): Correct access control unit
+ register numbers. From Ken Rose <rose@netcom.com>.
+
+ * config/tc-alpha.c: Add some static function prototypes.
+ (alpha_macros): Move to top of file. Make static.
+ (alpha_num_macros): Move to top of file.
+
+start-sanitize-v850
+Tue Oct 1 09:36:19 1996 Stu Grossman (grossman@critters.cygnus.com)
+
+ * tc-v850.h: Define LOCAL_LABEL to recognise _.L_* symbols
+ generated by DWARF.
+
+end-sanitize-v850
+Sat Sep 28 03:38:08 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * listing.c (list_symbol_table): Remove bogus code in BFD64 case,
+ and just call sprintf_vma.
+
+Thu Sep 26 16:04:11 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * expr.c (expr): Change >>= to >> (fix typo). (From meissner).
+
+Tue Sep 24 19:05:08 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * read.c (float_cons): Call md_flush_pending_output if it is
+ defined.
+
+start-sanitize-d10v
+Tue Sep 24 12:22:18 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * config/tc-d10v.c (md_operand): Created. Allows operands to
+ start with '#'.
+ * config/tc-d10v.h (md_operand): Undefined.
+
+end-sanitize-d10v
+Mon Sep 23 12:13:18 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/tc-m68k.c (add_fix): Treat a width of '3' like 'B'.
+ (md_assemble): A fixup width of '3' means a 1 byte reloc.
+
+Thu Sep 19 12:21:24 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/obj-coff.c (fixup_segment): Don't adjust PC relative
+ reloc for the i960 for a reloc in the same section. This undoes
+ one of the two changes made Aug 19.
+
+Wed Sep 18 12:11:58 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/obj-coff.c (obj_coff_endef): Both versions: Move C_STAT
+ symbols to the position of the debugging information.
+
+Mon Sep 16 11:41:40 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * expr.c (expr): Always use unsigned right shifts for >>.
+
+Thu Sep 12 10:25:45 1996 James G. Smith <jsmith@cygnus.co.uk>
+
+ * config/tc-arm.c (md_apply_fix3): Update two thumb instruction
+ slots when processing BL fixups.
+
+ * config/tc-arm.c (output_inst): Ensure Thumb BL fixup is marked
+ on the first half of the instruction.
+
+Wed Sep 11 00:09:35 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * ecoff.c (ecoff_stab): Create an expression symbol for a complex
+ stabs expression, rather than giving an error.
+
+ * ecoff.c (ecoff_new_file): Don't do anything if we are still in
+ the same file.
+
+Tue Sep 10 11:45:37 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/tc-mips.c (append_insn): Fill in the value for a constant
+ jump, rather than creating a reloc.
+
Mon Sep 9 10:57:42 1996 Ian Lance Taylor <ian@cygnus.com>
- * config/tc-mips.c (md_begin): Recognize r5000 for cpu. If
- mips_cpu is 5000, set interlocks and cop_interlocks.
+ * config/tc-mips.c (append_insn): Don't swap an instruction which
+ sets a condition code with an instruction which uses a condition
+ code.
+ (mips_ip): In cases 'N' and 'M', look for $fccN rather than an
+ immediate value.
+
+ * config/tc-mips.c (md_begin): Recognize r5000 for cpu.
(mips_ip): Give a better error message if the ISA level is wrong.
(md_parse_option): Recognize -mcpu=[v][r]5000.