+Fri Oct 10 11:22:45 1997 Martin M. Hunt <hunt@cygnus.com>
+
+ * config/tc-d10v.c: Fixes to make sure the AT_WORD
+ expression is not confused with -1.
+
+Fri Oct 10 11:54:50 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * config/tc-d10v.c (parallel_ok): Flag SP as modified for @-sp
+ operand - OPERAND_ATMINUS.
+
+Fri Oct 10 00:47:44 1997 Michael Meissner <meissner@cygnus.com>
+
+ * config/tc-d10v.c (parallel_ok): Note that auto increment and
+ decrement modify the index register.
+
+Thu Oct 9 15:17:50 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ From Robin Kirkham <Robin.Kirkham@mlb.dmt.csiro.au>:
+ * config/tc-m68k.c (archs): Add 68306, 68307, 68322, 68356, 68334,
+ 68336, 68341, 68349.
+ * doc/c-m68k.texi (M68K-Opts): Add -m68ec000 -m68hc000 -m68hc001
+ -m68306, -m68307, -m68322, -m68356, -m68ec020, -m68ec030,
+ -m68ec040, -m68ec060, -m68330, -m68334, -m68336, -m68341,
+ -m68349.
+
+ * doc/Makefile.am (CPU_DOCS): Define.
+ (as.info): Depend upon $(CPU_DOCS).
+ * doc/Makefile.in: Rebuild.
+
+ * configure.in: Remove AM_PROG_INSTALL; it's called by
+ AM_INIT_AUTOMAKE.
+ * configure: Rebuild.
+
+Thu Oct 9 01:44:36 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
+
+ * tc-d10v.h (TC_START_LABEL): Don't define.
+ (tc_frob_label): Define.
+
+Thu Oct 9 00:07:23 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
+
+ * config/tc-d10v.c (write_2_short): Fix bug that wouldn't allow
+ to pair a branch and link with anything but an exe instruction.
+
+Wed Oct 8 16:28:53 1997 Richard Henderson <rth@cygnus.com>
+
+ * config/tc-alpha.c (load_expression): Disable the sym+const .got
+ optimization to reduce the alignment surprises for gcc.
+
+Wed Oct 8 16:11:15 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * config/obj-coff.h (TC_SPARC): Don't define TARGET_FORMAT.
+ * config/tc-sparc.c (sparc_target_format): Handle coff here.
+ (sparc_ip): Add %hix,%lox.
+ (md_apply_fix3): Call as_bad_where, not as_bad.
+ Add support for BFD_RELOC_SPARC_{HIX22,LOX10}.
+ (tc_gen_reloc): Add support for BFD_RELOC_SPARC_{HIX22,LOX10}.
+
+Wed Oct 8 12:33:32 1997 Richard Henderson <rth@cygnus.com>
+
+ * configure.in: Change alpha-*-* to alpha*-*-*; config.guess now
+ recognizes alphaev5 etc.
+ * configure: Rebuild.
+
+Wed Oct 8 00:04:05 1997 Gavin Koch <gavin@cygnus.com>
+
+ * config/tc-mips.c (md_begin): Replace the TARGET_CPU value
+ of mipsr3900 with mipstx39.
+
+ * config/tc-mips.c (mips_ip): Don't print the 'opcode requires
+ -mipsXX message' if the insn isn't an ISA insn.
+
+Tue Oct 7 12:48:30 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * config/tc-sparc.h (TARGET_FORMAT support): Moved to tc-sparc.c.
+ Redefine TARGET_FORMAT to call sparc_target_format.
+ * config/tc-sparc.c (in_unsigned_range): New function.
+ (sparc_arch_size): Make static.
+ (sparc_target_format): New function.
+ (sparc_ip): Delete variable immediate_max. Rewrite %hi/etc reloc
+ handling. Add support for %hh,%hm,%lm,%h44,%m44,%l44.
+ (output_insn): Set `fx_no_overflow'.
+ (md_apply_fix3): Handle BFD_RELOC_SPARC_{7,H44,M44,L44}.
+ (tc_gen_reloc): Likewise.
+
+Mon Oct 6 14:04:50 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c (v850_section): Remove.
+
+ * config/obj-elf.c (obj_elf_section): Enhance error message.
+
+Fri Oct 3 15:40:38 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/tc-mips.c: Undef OBJ_COPY_SYMBOL_ATTRIBUTES before
+ including obj-elf.h in OBJ_MAYBE_ELF case.
+ (mips_target_format): Return NULL after abort to avoid warning.
+
+ * ecoff.c (generate_ecoff_stab): Remove unused static function.
+
+ * expr.c (operator): Accept ==. From Anders Blomdell
+ <anders.blomdell@control.lth.se>.
+
+ * config/atof-ieee.c (gen_to_words): When generating a denormal
+ number, handle an overflow into the smallest normalized number.
+
+Mon Sep 29 15:24:52 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
+
+ * as.h, input-scrub.c (new_logical_line): New return value.
+ * read.c (s_app_file): Don't note the same file several times
+ in a row.
+
+Thu Sep 25 13:08:02 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/tc-m68k.c (m68k_ip): Remove ` operand specifier.
+
+Wed Sep 24 16:54:40 1997 Joel Sherrill <joel@oarcorp.com>
+
+ * configure.in (sh*-*-rtems*): New target, like sh-*-elf*.
+ * configure: Rebuild.
+
+Wed Sep 24 11:30:25 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/tc-m68k.c (m68k_ip): Handle q and v operand specifiers.
+
+ * doc/c-i386.texi (i386-Float): Remove incorrect assertion that
+ fn* instructions do not insert implicit fwait. This was changed
+ Jan 29, 1996.
+
+ * config/m68k-parse.y (yylex): Permit an expression to be used for
+ the scale factor.
+
+ * Makefile.am (EXTRA_as_new_SOURCES): Set to config/m68k-parse.y,
+ not m68k-parse.y.
+ * Makefile.in: Rebuild.
+
+ * aclocal.m4: Rebuild with new libtool.
+ * configure: Rebuild.
+
+Tue Sep 23 17:48:09 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * app.c (do_scrub_chars): Clear mri_state at end of .mri
+ pseudo-op.
+
+ * config/tc-mips.c (hilo_interlocks): Change from a static
+ variable to a macro, so that it varies with the variables upon
+ which it depends.
+ (gpr_interlocks, cop_interlocks): Likewise.
+ (md_begin): Don't initialize them.
+
+Fri Sep 19 17:08:41 1997 Jeffrey A Law (law@cygnus.com)
+
+ * config/tc-mn10300.c (md_assemble): Use strcasecomp instead
+ of strcmp where appropriate.
+
+Thu Sep 18 14:11:56 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c (md_assemble): Cope with a zero data area
+ relocation with a constant offset.
+ (md_assemble): Produce error message when special data area
+ relocations are used on instructions which do not support them.
+ (md_assemble): Reset processor mask if defined by command line
+ switch.
+
+Thu Sep 18 11:24:01 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * config/tc-sparc.c: Reorganize file.
+ (parse_keyword_arg): Allow numbers in reg names.
+ (SPECIAL_CASE_NONE): New macro.
+ (md_assemble): Use it.
+ (lookup_arch,init_default_arch): New functions.
+ (default_arch,default_init_p,sparc_arch_table): New static locals.
+ (sparc_arch_size): New static local.
+ (max_architecture): Initialize in init_default_arch.
+ (md_parse_options): Call init_default_arch if necessary.
+ Rewrite -xarch/-A processing.
+ (md_show_usage): Print -A values from sparc_arch_table.
+ (md_begin): Call init_default_arch if necessary.
+ (sparc_md_end): Handle both 32 and 64 bit environments.
+ * config/tc-sparc.h (TARGET_FORMAT): Likewise.
+ * acconfig.h (SPARC_V9,SPARC_ARCH64): Delete.
+ (DEFAULT_ARCH): Add.
+ * config.in: Regenerate.
+ * configure.in (sparc): Default DEFAULT_ARCH based on target cpu.
+ (SPARC_V9,SPARC_ARCH64): Delete.
+ * configure: Regenerate.
+ * config/vms-conf.h (SPARC_V9,SPARC_ARCH64): Delete.
+
+Wed Sep 17 16:54:20 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c (v850_reloc_prefix): Recoded to use CHECK_ ()
+ macro.
+ (handle_tdaoff, handle_zdaoff, handle_sdaoff): New functions.
+start-sanitize-v850e
+
+ * config/tc-v850.c (md_assemble): Corrected typo.
+ * config/tc-v850.c Add new sections: call_table_data and
+ call_table_text.
+ (v850_reloc_prefix): Add support for ctoff() relocation prefix.
+ (handle_ctoff): New Function.
+
+ * doc/c-v850.texi (V850 Opcodes): Document call table relocations.
+end-sanitize-v850e
+
+Tue Sep 16 14:18:22 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c (v850_reloc_prefix): Add support for a 16 bit
+ displacement from the tiny data area pointer.
+
+Mon Sep 15 21:28:09 1997 Jeffrey A Law (law@cygnus.com)
+
+ * config/tc-hppa.c (fix_new_hppa): Make declaration match
+ definition.
+
+Mon Sep 15 18:33:06 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c (processor_mask): New variable.
+ (set_machine, md_parse_option): Set processor_mask.
+ (md_assemble): Check that instruction is available to target
+ processor.
+
+ * config/tc-v850.h (TARGET_PROCESSOR): New constant.
+start-sanitize-v850e
+ (TARGET_PROCESSOR): New constant.
+ (TARGET_PROCESSOR): New constant.
+end-sanitize-v850e
+
+start-sanitize-tx19
+Mon Sep 15 17:26:46 1997 Gavin Koch <gavin@cygnus.com>
+
+ * config/tc-mips.c (mips_1900): Replace with mips_3900 and
+ mips16.
+
+end-sanitize-tx19
+start-sanitize-d30v
+Mon Sep 15 11:28:04 1997 Ken Raeburn <raeburn@cygnus.com>
+
+ Merge in work from Martin Hunt:
+
+ * config/tc-d30v.c (build_insn): For mvfsys and mvtsys,
+ CR is 0 for PSWL and PSWH.
+
+ * config/tc-d30v.c (do_assemble): Don't accept
+ illegal condition codes for cmpu instruction.
+
+ * config/tc-d30v.c: Add support for BFD_RELOC_D30V_9_PCREL
+ used in d*i instructions.
+
+ * config/tc-d30v.c (check_size): New function. Check
+ relocations for overflows.
+ (md_pcrel_from_section): Fix relocations between sections.
+ (md_apply_fix3): Use new relocation types for 15 and 21
+ bit relocations in the right container. Needed because
+ the address of the instruction is not eight-byte aligned
+ but the relocations must be.
+
+ * config/tc-d30v.c (md_apply_fix3): Check for overflow.
+ (find_format): If ".s" or ".l" are used, don't try
+ to compute branch sizes.
+
+ * config/tc-d30v.c (do_assemble): Check for ".s" or
+ ".l" extensions to opcode names.
+ (find_format): Generate the correct instructions when
+ ".s" or ".l" are used.
+
+ * config/tc-d30v.c (build_insn): Check for odd registers
+ on instructions that require even registers.
+
+ * config/tc-d30v.h (md_start_line_hook): Define.
+ * config/tc-d30v.c (md_start_line_hook): New hook.
+ Checks the beginning of each line for a ".". If it
+ finds one, assume a pseudo-op and flush any unwritten
+ instructions.
+
+ * config/tc-d30v.c (md_apply_fix3): Fix problem
+ with determining when fixups were done.
+
+ * config/tc-d30v.c (build_insn): Fix bug where the numeric
+ part of a symbol (for example, "foo+8") was being written
+ into the instruction.
+ (md_pseudo_table): Change .word to be 32 bits and add
+ .hword as 16 bits.
+
+ * config/tc-d30v.c (parallel_ok): Check to see if first
+ instruction is a jump.
+
+ * config/tc-d30v.c (parallel_ok): Major code reorganization.
+
+end-sanitize-d30v
+Wed Sep 10 10:07:08 1997 Nick Clifton <nickc@cygnus.com>
+
+start-sanitize-v850e
+ * config/tc-v850.c (md_assemble): Corrected spelling mistake.
+end-sanitize-v850e
+ * configure.in (emulations): Add v850 emulation.
+
+Tue Sep 9 17:14:33 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * Makefile.am (CPU_TYPES): Add arc.
+ (TARGET_CPU_CFILES): Add tc-arc.c.
+ (TARGET_CPU_HFILES): Add tc-arc.h.
+ (dependencies): Rebuild.
+ * Makefile.in: Rebuild.
+ * configure.in: Recognize arc-*-elf*.
+ * configure: Regenerated.
+ * config/tc-arc.[ch]: New files.
+
+Tue Sep 9 10:19:37 1997 Nick Clifton <nickc@cygnus.com>
+
+ * doc/c-v850.texi (V850 Opcodes): Document hi0() reloc prefix.
+ Correct description of hi() reloc prefix.
+
+start-sanitize-v850e
+ * doc/c-v850.texi (V850 Opcodes): Document new reloc prefix.
+ * config/tc-v850.c (v850_reloc_prefix): Add hilo() reloc prefix.
+ * config/tc-v850.c (md_assemble): Add support for BFD_RELOC_32.
+end-sanitize-v850e
+
+ * doc/c-v850.texi: Document new pseudo ops and command line
+ options.
+
+ * config/tc-v850.c (set_machine): New function.
+ * config/tc-v850.c (.v850): New pseudo op.
+start-sanitize-v850e
+ * config/tc-v850.c (.v850e): New pseudo op.
+ * config/tc-v850.c (.v850eq): New pseudo op.
+end-sanitize-v850e
+
+
+Mon Sep 8 23:08:04 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ Support -alh and -ald for DWARF 1:
+ * listing.c (struct list_info_struct): Add debugging field.
+ (listing_newline): Initialize the debugging field. If ELF, if the
+ section starts with .debug or .line, set the debugging field in
+ the listing structure.
+ (debugging_pseudo): Add list parameter. Change all callers. If
+ the debugging field is set, consider it to be a debugging pseudo.
+ If ELF, skip blank lines between debugging lines.
+ * read.c (emit_expr): If ELF, look for line numbers.
+ (stringer): If ELF, look for file names.
+
+Mon Sep 8 12:33:40 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c (v850_insert_operand): Only test for overflow
+ if there is no insert function.
+
+ * config/tc-v850.h (TARGET_MACHINE): New constant.
+
+ * config/tc-v850.c (v850_insert_operand): Add
+ -mwarn_unsigned_overflow.
+ (md_begin): Set BFD machine number based on machine variable.
+ (md_parse_option): Add -mv850, -mv850e and -mv850eq options.
+
+Mon Sep 8 11:20:46 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * as.h: Don't declare alloca if it is a macro.
+ * macro.c: Likewise.
+
+start-sanitize-tx19
+Sun Sep 7 16:04:53 1997 Gavin Koch <gavin@cygnus.com>
+
+ * config/tc-mips.c: Add tx19/r1900.
+
+end-sanitize-tx19
+Sun Sep 7 00:30:19 1997 Richard Henderson <rth@cygnus.com>
+
+ * config/tc-alpha.c (md_parse_option): Move m[] out to top level and
+ rename to cpu_types[].
+ (s_alpha_arch): New function.
+ (md_pseudo_table): Add "arch".
+
+ * config/tc-alpha.c (md_begin): Merge the two loops through the
+ opcode table.
+ (s_alpha_proc): Add initial SKIP_WHITESPACE.
+ (s_alpha_set): Likewise. Use get_symbol_end instead local while loop.
+
Sat Sep 6 19:38:12 1997 Fred Fish <fnf@ninemoons.com>
* read.h (s_lcomm_bytes): Add prototype (for real this time).
start-sanitize-v850e
* config/tc-v850.c (parse_register_list): Support constant
expressions as register lists.
-start-sanitize-v850e
+end-sanitize-v850e
Mon Aug 25 10:19:34 1997 Nick Clifton <nickc@cygnus.com>
* configure.in (emulations): Add support for v850e target
* configure (emulations): Add support for v850e target
-end-sanitize-v850e
-start-sanitize-v850eq
Mon Aug 18 11:24:21 1997 Nick Clifton <nickc@cygnus.com>
* config/tc-v850.c: Remove support_v850eq flag and command line
* configure.in (emulations): Add support for v850eq target
* configure (emulations): Add support for v850eq target
-end-sanitize-v850eq
+end-sanitize-v850e
Fri Aug 15 14:00:13 1997 Ian Lance Taylor <ian@cygnus.com>
Wed Aug 13 18:58:56 1997 Nick Clifton <nickc@cygnus.com>
start-sanitize-v850e
- * config/.Sanitize (Do-first, Do-last): Add support for keep-v850e
- command line option.
-end-sanitize-v850e
-
-start-sanitize-v850eq
- * config/.Sanitize (Do-first, Do-last): Add support for keep-v850eq
- command line option.
-end-sanitize-v850eq
-
-start-sanitize-v850eq
* config/tc-v850.c (md_assemble, md_show_usage, md_parse_option):
Add support for v850eq instructions.
-start-sanitize-v850eq
-
-start-sanitize-v850e
+
* config/tc-v850.c (md_assemble, md_show_usage, md_parse_option):
Add support for v850e instructions.
-start-sanitize-v850e
+end-sanitize-v850e
* config/tc-v850.c (md_assemble): Fix error recovery to reload
text of entire opcode.
Thu Feb 13 20:02:16 1997 Fred Fish <fnf@cygnus.com>
- * config/{tc-alpha.h, tc-arc.h, tc-d10v.h, tc-generic.h, tc-i960.h,
+ * config/{tc-alpha.h, tc-d10v.h, tc-generic.h, tc-i960.h,
tc-mn10200.h, tc-mn10300.h, tc-sh.h, tc-vax.h, tc-w65.h}:
Add default definition of zero for TARGET_BYTES_BIG_ENDIAN.
* config/{tc-arm.h, tc-hppa.h, tc-i386.h, tc-mips.h, tc-ns32k.h,
* mpw-config.in: Don't always use te-generic.h for emulation.
(powerpc-apple-macos): Use emulation te-macos.h.
-start-sanitize-gm
- (mips-gm-magic): New configuration.
-end-sanitize-gm
* mpw-make.sed (install, install-only): Edit in Mac-specific
install procedure.
projects / deliverable / binutils-gdb.git / blobdiff