-2006-11-22 Daniel Jacobowitz <dan@codesourcery.com>
+2007-04-20 Nathan Sidwell <nathan@codesourcery.com>
- * config/tc-arm.h (md_cons_align): Define.
- (mapping_state): New prototype.
- * config/tc-arm.c (mapping_state): Make global.
+ * config/m68k-parse.h (RAMBAR_ALT): New.
+ * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
+ (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
+ mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
+ mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
+ mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
+ RAMBAR1.
+ (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
+ (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
+ (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used. Add it
+ to control register mapping.
-2006-11-22 Alan Modra <amodra@bigpond.net.au>
+2007-04-20 Alan Modra <amodra@bigpond.net.au>
- * config/obj-elf.c (obj_elf_version): Use memcpy rather than strcpy.
+ * messages.c (as_internal_value_out_of_range): Fix typo in
+ error message. Return after printing domain error.
+ * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
+ in max when shifting right.
-2006-11-16 Mei ligang <ligang@sunnorth.com.cn>
+2007-04-20 Alan Modra <amodra@bigpond.net.au>
- * config/tc-score.c (score_relax_frag): If next frag contains 32 bit
- branch instruction, handle it specially.
- (score_insns): Modify 32 bit branch instruction.
+ * messages.c (as_internal_value_out_of_range): Extend to report
+ errors for values with invalid low bits set.
+ * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
+ fields. Check that operands and opcode fields are disjoint.
+ (ppc_insert_operand): Check operands using mask rather than bit
+ count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
+ insertion code.
+ (md_apply_fix): Adjust for struct powerpc_operand change.
-2006-11-16 Alan Modra <amodra@bigpond.net.au>
+2007-04-19 Paul Brook <paul@codesourcery.com>
- * symbols.c (resolve_symbol_value): Formatting.
+ * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
+ Thumb-1. Add sanity check for bogus relaxations.
-2006-11-15 Jan Beulich <jbeulich@novell.com>
+2007-04-19 Paul Brook <paul@codesourcery.com>
- PR/3469
- * symbols.c (symbol_clone): Mark symbol ending up not on symbol
- chain by linking it to itself.
- (resolve_symbol_value): Also check symbol_shadow_p().
- (symbol_shadow_p): New.
- * symbols.h (symbol_shadow_p): Declare.
+ * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
-2006-11-12 Mark Shinwell <shinwell@codesourcery.com>
+2007-04-19 Alan Modra <amodra@bigpond.net.au>
- * config/tc-arm.c (do_t_czb): Rename to do_t_cbz.
- (insns): Adjust accordingly.
- (md_apply_fix): Alter comments to use CBZ instead of CZB.
-
-2006-11-10 Pedro Alves <pedro_alves@portugalmail.pt>
-
- * config/tc-arm.c (arm_fix_adjustable) [OBJ_COFF]: Delete.
- (arm_fix_adjustable) [OBJ_ELF]: Use it on coff targets too.
-
-2006-11-10 Nick Clifton <nickc@redhat.com>
-
- PR gas/3456:
- * config/obj-elf.c (obj_elf_version): Do not include the name
- field's padding in the namesz value.
-
-2006-11-09 Thiemo Seufer <ths@mips.com>
-
- * config/tc-mips.c: Fix outdated comment.
-
-2006-11-08 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.h (CpuPNI): Removed.
- (CpuUnknownFlags): Replace CpuPNI with CpuSSE3.
- * config/tc-i386.c (md_assemble): Likewise.
-
-2006-11-08 Alan Modra <amodra@bigpond.net.au>
-
- * symbols.c (symbol_create, symbol_clone): Don't set udata.p.
-
-2006-11-06 David Daney <ddaney@avtrex.com>
-
- * config/tc-mips.c (pic_need_relax): Return true for section symbols.
-
-2006-11-06 Thiemo Seufer <ths@mips.com>
-
- * doc/c-mips.texi (-march): Document sb1a.
-
-2006-11-06 Thiemo Seufer <ths@mips.com>
-
- * config/tc-mips.c (mips_cpu_info_table): Remove 24k/24ke aliases.
- 34k always has DSP ASE.
-
-2006-11-03 Thiemo Seufer <ths@mips.com>
-
- * config/tc-mips.c (md_pcrel_from_section): Disallow PC relative
- MIPS16 instructions referencing other sections, unless they are
- external branches.
-
-2006-11-03 Thiemo Seufer <ths@mips.com>
-
- * config/tc-mips.c (mips_cpu_info_table): The 25Kf is a MIPS64
- release 1 CPU.
-
-2006-11-03 Jakub Jelinek <jakub@redhat.com>
-
- * dw2gencfi.c (struct fde_entry): Add per_encoding, lsda_encoding,
- personality and lsda.
- (struct cie_entry): Add per_encoding, lsda_encoding and personality.
- (alloc_fde_entry): Initialize per_encoding and lsda_encoding.
- (cfi_pseudo_table): Handle .cfi_personality and .cfi_lsda.
- (dot_cfi_personality, dot_cfi_lsda, encoding_size): New functions.
- (output_cie): Output personality including its encoding and LSDA encoding.
- (output_fde): Output LSDA.
- (select_cie_for_fde): Don't share CIE if personality, its encoding or
- LSDA encoding are different. Copy the 3 fields from fde_entry to
- cie_entry.
- * doc/as.texinfo (.cfi_personality, .cfi_lsda): Document.
-
- * subsegs.h (struct frchain): Add frch_cfi_data field.
- * dw2gencfi.c: Include subsegs.h.
- (cur_fde_data, last_address, cur_cfa_offset, cfa_save_stack): Removed.
- (struct frch_cfi_data): New type.
- (unused_cfi_data): New variable.
- (alloc_fde_entry): Move cur_fde_data, last_address, cur_cfa_offset
- and cfa_save_stack static vars into a structure pointed from
- each frchain.
- (alloc_cfi_insn_data, cfi_new_fde, cfi_end_fde, cfi_set_return_column,
- cfi_add_advance_loc, cfi_add_CFA_def_cfa, cfi_add_CFA_def_cfa_offset,
- cfi_add_CFA_remember_state, cfi_add_CFA_restore_state, dot_cfi,
- dot_cfi_escape, dot_cfi_startproc, dot_cfi_endproc, cfi_finish):
- Likewise.
-
-2006-11-02 Daniel Jacobowitz <dan@codesourcery.com>
-
- * config/tc-h8300.c (build_bytes): Fix const warning.
-
-2006-11-01 Mei Ligang <ligang@sunnorth.com.cn>
-
- * tc-score.c (do16_rdrs): Handle not! instruction especially.
-
-2006-10-31 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (arm_adjust_symtab): Don't use STT_ARM_16BIT
- for EABIv4.
-
-2006-10-31 Paul Brook <paul@codesourcery.com>
-
- gas/
- * config/tc-arm.c (object_arch): New variable.
- (s_arm_object_arch): New function.
- (md_pseudo_table): Add object_arch.
- (aeabi_set_public_attributes): Obey object_arch.
- * doc/c-arm.texi: Document .object_arch.
-
-2006-10-31 Mei Ligang <ligang@sunnorth.com.cn>
-
- * tc-score.c (data_op2): Check invalid operands.
- (my_get_expression): Const operand of some instructions can not be
- symbol in assembly.
- (get_insn_class_from_type): Handle instruction type Insn_internal.
- (do_macro_ldst_label): Modify inst.type.
- (Insn_PIC): Delete.
- (data_op2): The immediate value in lw is 15 bit signed.
-
-2006-10-29 Randolph Chung <tausq@debian.org>
-
- * config/tc-hppa.c (hppa_cfi_frame_initial_instructions)
- (hppa_regname_to_dw2regnum): New funcions.
- * config/tc-hppa.h [OBJ_ELF] (TARGET_USE_CFIPOP): Define.
- (tc_cfi_frame_initial_instructions)
- (tc_regname_to_dw2regnum): Define.
- (hppa_cfi_frame_initial_instructions)
- (hppa_regname_to_dw2regnum): Declare.
- (DWARF2_LINE_MIN_INSN_LENGTH, DWARF2_DEFAULT_RETURN_COLUMN)
- (DWARF2_CIE_DATA_ALIGNMENT): Define.
-
-2006-10-29 Nick Clifton <nickc@redhat.com>
-
- * config/tc-spu.c (md_assemble): Cast printf string size parameter
- to int in order to avoid a compiler warning.
-
-2006-10-27 Andrew Stubbs <andrew.stubbs@st.com>
-
- * config/tc-sh.c (md_assemble): Define size of branches.
-
-2006-10-26 Ben Elliston <bje@au.ibm.com>
-
- * dw2gencfi.c (cfi_add_CFA_offset):
- Assert DWARF2_CIE_DATA_ALIGNMENT is non-zero.
-
- * write.c (chain_frchains_together_1): Assert that this function
- never returns a pointer to the auto variable `dummy'.
-
-2006-10-25 Trevor Smigiel <Trevor_Smigiel@playstation.sony.com>
- Yukishige Shibata <shibata@rd.scei.sony.co.jp>
- Nobuhisa Fujinami <fnami@rd.scei.sony.co.jp>
- Takeaki Fukuoka <fukuoka@rd.scei.sony.co.jp>
- Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-spu.c: New file.
- * config/tc-spu.h: New file.
- * configure.tgt: Add SPU support.
- * Makefile.am: Likewise. Run "make dep-am".
+ * Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
- * po/POTFILES.in: Regenerate.
-
-2006-10-25 Ben Elliston <bje@au.ibm.com>
-
- * expr.c (expr): Replace O_add case in switch (op_left) explaining
- why it can never occur.
-
-2006-10-24 Andrew Pinski <andrew_pinski@playstation.sony.com>
- * doc/c-ppc.texi (-mcell): Document.
- * config/tc-ppc.c (parse_cpu): Parse -mcell.
- (md_show_usage): Document -mcell.
+2007-04-19 Nathan Froyd <froydnj@codesourcery.com>
-2006-10-23 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
+ * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
- * doc/c-i386.texi : Document amdfam10,.sse4a and .abm in cpu_type.
+2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
-2006-10-23 Alan Modra <amodra@bigpond.net.au>
+ * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
- * config/tc-m68hc11.c (md_assemble): Quiet warning.
+2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
-2006-10-19 Mike Frysinger <vapier@gentoo.org>
+ * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
+ (match_template): Handle operand size for crc32 in SSE4.2.
+ (process_suffix): Handle operand type for crc32 in SSE4.2.
+ (output_insn): Support SSE4.2.
- * config/tc-i386.c (md_parse_option): Use CONST_STRNEQ.
- (x86_64_section_letter): Likewise.
+2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
-2006-10-19 Mei Ligang <ligang@sunnorth.com.cn>
+ * config/tc-i386.c (cpu_arch): Add .sse4.1.
+ (process_operands): Adjust implicit operand for blendvpd,
+ blendvps and pblendvb in SSE4.1.
+ (output_insn): Support SSE4.1.
- * config/tc-score.c (build_relax_frag): Compute correct
- tc_frag_data.fixp.
+2007-04-18 Paul Brook <paul@codesourcery.com>
-2006-10-18 Roy Marples <uberlord@gentoo.org>
-
- * config/tc-sparc.c (md_parse_option): Treat any target starting with
- elf32-sparc as a viable target for the -32 switch and any target
- starting with elf64-sparc as a viable target for the -64 switch.
- (sparc_target_format): For 64-bit ELF flavoured output use
- ELF_TARGET_FORMAT64 while for 32-bit ELF flavoured output use
- ELF_TARGET_FORMAT.
- * config/tc-sparc.h (ELF_TARGET_FORMAT, ELF_TARGET_FORMAT64): Define.
-
-2006-10-17 H.J. Lu <hongjiu.lu@intel.com>
-
- * configure: Regenerated.
+ * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
-2006-10-16 Bernd Schmidt <bernd.schmidt@analog.com>
+2007-04-16 Kaz Kojima <kkojima@rr.iij4u.or.jp>
- * input-scrub.c (input_scrub_next_buffer): Use TC_EOL_IN_INSN
- in addition to testing for '\n'.
- (TC_EOL_IN_INSN): Provide a default definition if necessary.
+ * config/tc-sh.c (sh_handle_align): Call as_bad_where instead
+ of as_warn_where for misaligned data.
-2006-10-13 Sterling Augstine <sterling@tensilica.com>
+2007-04-15 Kaz Kojima <kkojima@rr.iij4u.or.jp>
- * dwarf2dbg.c (out_debug_info): Use TC_DWARF2_EMIT_OFFSET to emit
- a disjoint DW_AT range.
+ * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
+ rs_fill frags.
-2006-10-13 Mei Ligang <ligang@sunnorth.com.cn>
+2007-04-14 Steve Ellcey <sje@cup.hp.com>
- * config/tc-score.c (md_show_usage): Print -KPIC option usage.
-
-2006-10-08 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (parse_big_immediate): 64-bit host fix.
- (parse_operands): Use parse_big_immediate for OP_NILO.
- (neon_cmode_for_logic_imm): Try smaller element sizes.
- (neon_cmode_for_move_imm): Ditto.
- (do_neon_logic): Handle .i64 pseudo-op.
-
-2006-09-29 Alan Modra <amodra@bigpond.net.au>
-
- * po/POTFILES.in: Regenerate.
-
-2006-09-28 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.h (CpuMNI): Renamed to ...
- (CpuSSSE3): This.
- (CpuUnknownFlags): Updated.
- (processor_type): Replace PROCESSOR_YONAH with PROCESSOR_CORE
- and PROCESSOR_MEROM with PROCESSOR_CORE2.
- * config/tc-i386.c: Updated.
- * doc/c-i386.texi: Likewise.
-
- * config/tc-i386.c (cpu_arch): Add ".ssse3", "core" and "core2".
-
-2006-09-28 Bridge Wu <mingqiao.wu@gmail.com>
-
- * config/tc-arm.c (md_apply_fix): Do not clear write_back bit.
-
-2006-09-27 Nick Clifton <nickc@redhat.com>
-
- * output-file.c (output_file_close): Prevent an infinite loop
- reporting that stdoutput could not be closed.
-
-2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
- Joseph Myers <joseph@codesourcery.com>
- Ian Lance Taylor <ian@wasabisystems.com>
- Ben Elliston <bje@wasabisystems.com>
-
- * config/tc-arm.c (arm_cext_iwmmxt2): New.
- (enum operand_parse_code): New code OP_RIWR_I32z.
- (parse_operands): Handle OP_RIWR_I32z.
- (do_iwmmxt_wmerge): New function.
- (do_iwmmxt_wldstd): Handle iwmmxt2 case where second operand is
- a register.
- (do_iwmmxt_wrwrwr_or_imm5): New function.
- (insns): Mark instructions as RIWR_I32z as appropriate.
- Also add torvsc<b,h,w>, wabs<b,h,w>, wabsdiff<b,h,w>,
- waddbhus<l,m>, waddhc, waddwc, waddsubhx, wavg4{r}, wmaddu{x,n},
- wmadds{x,n}, wmerge, wmiaxy{n}, wmiawxy{n}, wmul<sm,um>{r},
- wmulw<um,sm,l>{r}, wqmiaxy{n}, wqmulm{r}, wqmulwm{r}, wsubaddhx.
- (md_begin): Handle IWMMXT2.
- (arm_cpus): Add iwmmxt2.
- (arm_extensions): Likewise.
- (arm_archs): Likewise.
-
-2006-09-25 Bob Wilson <bob.wilson@acm.org>
-
- * doc/as.texinfo (Overview): Revise description of --keep-locals.
- Add xref to "Symbol Names".
- (L): Refer to "local symbols" instead of "local labels". Move
- definition to "Symbol Names" section; add xref to that section.
- (Symbol Names): Use "Local Symbol Names" section to define local
- symbols. Add "Local Labels" heading for description of temporary
- forward/backward labels, and refer to those as "local labels".
-
-2006-09-23 H.J. Lu <hongjiu.lu@intel.com>
-
- PR binutils/3235
- * config/tc-i386.c (match_template): Check address size prefix
- to turn Disp64/Disp32/Disp16 operand into Disp32/Disp16/Disp32
- operand.
-
-2006-09-22 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-ppc.c (ppc_symbol_chars): Remove '+' and '-'.
-
-2006-09-22 Alan Modra <amodra@bigpond.net.au>
-
- * as.h (as_perror): Delete declaration.
- * gdbinit.in (as_perror): Delete breakpoint.
- * messages.c (as_perror): Delete function.
- * doc/internals.texi: Remove as_perror description.
- * listing.c (listing_print: Don't use as_perror.
- * output-file.c (output_file_create, output_file_close): Likewise.
- * symbols.c (symbol_create, symbol_clone): Likewise.
- * write.c (write_contents): Likewise.
- * config/obj-som.c (obj_som_version, obj_som_copyright): Likewise.
- * config/tc-tic54x.c (tic54x_mlib): Likewise.
-
-2006-09-22 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-ppc.c (md_section_align): Don't round up address for ELF.
- (ppc_handle_align): New function.
- * config/tc-ppc.h (HANDLE_ALIGN): Use ppc_handle_align.
- (SUB_SEGMENT_ALIGN): Define as zero.
-
-2006-09-20 Bob Wilson <bob.wilson@acm.org>
-
- * doc/as.texinfo: Fix cross reference usage, typos and grammar.
- (Overview): Skip cross reference in man page.
-
-2006-09-20 Kai Tietz <Kai.Tietz@onevision.com>
-
- * configure.in: Add new target x86_64-pc-mingw64.
- * configure: Regenerate.
- * configure.tgt: Add new target x86_64-pc-mingw64.
- * config/obj-coff.h: Add handling for TE_PEP target specific code
- and definitions.
- * config/tc-i386.c: Add new targets.
- (md_parse_option): Add targets to OPTION_64.
- (x86_64_target_format): Add new method for setup proper default
- target cpu mode.
- * config/te-pep.h: Add new target definition header.
- (TE_PEP): New macro: Identifies new target architecture.
- (COFF_WITH_pex64): Set proper includes in bfd.
- * NEWS: Mention new target.
-
-2006-09-18 Bernd Schmidt <bernd.schmidt@analog.com>
-
- * config/bfin-parse.y (binary): Change sub of const to add of negated
- const.
-
-2006-09-17 Mei Ligang <ligang@sunnorth.com.cn>
-
- * config/tc-score.c: New file.
- * config/tc-score.h: Newf file.
- * configure.tgt: Add Score target.
- * Makefile.am: Add Score files.
+ * Makefile.am: Add ACLOCAL_AMFLAGS.
* Makefile.in: Regenerate.
- * NEWS: Mention new target support.
-
-2006-09-16 Paul Brook <paul@codesourcery.com>
- * config/tc-arm.c (s_arm_unwind_movsp): Add offset argument.
- * doc/c-arm.texi (movsp): Document offset argument.
+2007-04-14 Kaz Kojima <kkojima@rr.iij4u.or.jp>
-2006-09-16 Paul Brook <paul@codesourcery.com>
+ * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
+ (sh_optimize_expr): Likewise.
+ * config/tc-sh.h (md_optimize_expr): Define.
+ (sh_optimize_expr): Prototype.
- * config/tc-arm.c (thumb32_negate_data_op): Consistently use
- unsigned int to avoid 64-bit host problems.
+2007-04-06 Matt Thomas <matt@netbsd.org>
-2006-09-15 Bernd Schmidt <bernd.schmidt@analog.com>
+ * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
+ to emit pcrel relocations by DWARF2 in non-code sections. Borrowed
+ heavily from tc-sparc.c. (vax_cons_fix_new): Likewise.
- * config/bfin-parse.y (binary): Do some more constant folding for
- additions.
+2007-04-04 Kazu Hirata <kazu@codesourcery.com>
-2006-09-13 Jan Beulich <jbeulich@novell.com>
+ * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
- * input-file.c (input_file_give_next_buffer): Demote as_bad to
- as_warn.
+2007-04-04 Paul Brook <paul@codesourcery.com>
-2006-09-13 Alan Modra <amodra@bigpond.net.au>
+ * config/tc-arm.c (do_neon_ext): Enforce immediate range.
+ (insns): Use I15 for vext.
- PR gas/3165
- * config/tc-sh (DWARF2_CIE_DATA_ALIGNMENT): Wrap negative number
- in parens.
+2007-04-04 Paul Brook <paul@codesourcery.com>
-2006-09-13 Alan Modra <amodra@bigpond.net.au>
+ * configure.tgt: Loosen checks for arm uclinux eabi targets.
- * input-file.c (input_file_open): Replace as_perror with as_bad
- so that gas exits with error on file errors. Correct error
- message.
- (input_file_get, input_file_give_next_buffer): Likewise.
- * input-file.h: Update comment.
+2007-04-02 Sterling Augustine <sterling@tensilica.com>
-2006-09-11 Tomas Frydrych <dr.tomas@yahoo.co.uk>
+ * config/tc-xtensa.c (xtensa_flush_pending_output): Check
+ outputting_stabs_line_debug.
- PR gas/3172
- * config/tc-arm.c (parse_typed_reg_or_scalar): Accept wCg class
- registers as a sub-class of wC registers.
+2007-03-26 Anatoly Sokolov <aesok@post.ru>
-2006-09-11 Alan Modra <amodra@bigpond.net.au>
+ * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
+ at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
+ devices.
+ * doc/c-avr.texi: Document new devices.
- PR gas/3165
- * config/tc-mips.h (enum dwarf2_format): Forward declare.
- (DWARF2_CIE_DATA_ALIGNMENT): Wrap negative number in parens.
- * config/tc-alpha.h (DWARF2_CIE_DATA_ALIGNMENT): Likewise.
- * config/tc-arm.h (DWARF2_CIE_DATA_ALIGNMENT): Likewise.
+2007-04-02 Richard Sandiford <richard@codesourcery.com>
-2006-09-08 Nick Clifton <nickc@redhat.com>
+ * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
+ * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
+ * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
- PR gas/3129
- * doc/as.texinfo (Macro): Improve documentation about separating
- macro arguments from following text.
-
-2006-09-08 Paul Brook <paul@codesourcery.com>
+2007-03-30 Sterling Augustine <sterling@tensilica.com>
+ Bob Wilson <bob.wilson@acm.org>
- * config/tc-arm.c (insns): Allow ARM IT pseudo-insn on all cores.
+ * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
+ Do not check is_loop_target flag.
+ (xtensa_frob_label): Adjust calls to xtensa_move_labels.
+ (xg_assemble_vliw_tokens): Likewise. Also avoid calling
+ xtensa_move_labels for alignment of loop opcodes.
+
+2007-03-30 H.J. Lu <hongjiu.lu@intel.com>
-2006-09-07 Paul Brook <paul@codesourcery.com>
+ * config/tc-i386.c (process_suffix): Reindent a bit.
- * config/tc-arm.c (parse_operands): Mark operand as present.
+2007-03-30 Paul Brook <paul@codesourcery.com>
-2006-09-04 Paul Brook <paul@codesourcery.com>
+ * config/tc-arm.c (encode_thumb2_ldmstm): New function.
+ (do_t_ldmstm): Generate 16-bit push/pop. Use encode_thumb2_ldmstm.
+ (do_t_push_pop): Use encode_thumb2_ldmstm.
- * config/tc-arm.c (do_neon_dyadic_if_i): Remove.
- (do_neon_dyadic_if_i_d): Avoid setting U bit.
- (do_neon_mac_maybe_scalar): Ditto.
- (do_neon_dyadic_narrow): Force operand type to NT_integer.
- (insns): Remove out of date comments.
+2007-03-29 DJ Delorie <dj@redhat.com>
-2006-08-29 Nick Clifton <nickc@redhat.com>
+ * config/tc-m32c.c (rl_for, relaxable): Protect argument.
+ (md_relax_table): Add entries for ADJNZ macros.
+ (M32C_Macros): Add ADJNZ macros.
+ (subtype_mappings): Add entries for ADJNZ macros.
+ (insn_to_subtype): Check for adjnz and sbjnz insns.
+ (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
+ (md_convert_frag): Convert adjnz and sbjnz.
- * read.c (s_align): Initialize the 'stopc' variable to prevent
- compiler complaints about it being used without being
- initialized.
- (s_comm_internal, s_mri_common, s_fail, s_globl, s_space,
- s_float_space, s_struct, cons_worker, equals): Likewise.
+2007-03-29 Nick Clifton <nickc@redhat.com>
-2006-08-29 Malcolm Parsons <malcolm.parsons@gmail.com>
+ * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
+ initialization.
+ * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
+ using ITBL_NUMBER_OF_PROCESSORS.
+ * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
- * ecoff.c (ecoff_directive_val): Fix message typo.
- * config/tc-ns32k.c (convert_iif): Likewise.
- * config/tc-sh64.c (shmedia_check_limits): Likewise.
+2007-03-28 H.J. Lu <hongjiu.lu@intel.com>
-2006-08-25 Sterling Augustine <sterling@tensilica.com>
- Bob Wilson <bob.wilson@acm.org>
-
- * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Do not check
- the state of the absolute_literals directive. Remove align frag at
- the start of the literal pool position.
-
-2006-08-25 Bob Wilson <bob.wilson@acm.org>
-
- * doc/c-xtensa.texi: Add @group commands in examples.
-
-2006-08-24 Bob Wilson <bob.wilson@acm.org>
-
- * config/tc-xtensa.c (FINI_LITERAL_SECTION_NAME): Delete.
- (INIT_LITERAL_SECTION_NAME): Delete.
- (lit_state struct): Remove segment names, init_lit_seg, and
- fini_lit_seg. Add lit_prefix and current_text_seg.
- (init_literal_head_h, init_literal_head): Delete.
- (fini_literal_head_h, fini_literal_head): Delete.
- (xtensa_begin_directive): Move argument parsing to
- xtensa_literal_prefix function.
- (xtensa_end_directive): Deallocate lit_prefix field of lit_state.
- (xtensa_literal_prefix): Parse the directive argument here and
- record it in the lit_prefix field. Remove code to derive literal
- section names.
- (linkonce_len): New.
- (get_is_linkonce_section): Use linkonce_len. Check for any
- ".gnu.linkonce.*" section, not just text sections.
- (md_begin): Remove initialization of deleted lit_state fields.
- (xtensa_reorder_segments, xtensa_post_relax_hook): Remove references
- to init_literal_head and fini_literal_head.
- (xtensa_move_literals): Likewise. Skip literals for .init and .fini
- when traversing literal_head list.
- (match_section_group): New.
- (cache_literal_section): Rewrite to determine the literal section
- name on the fly, create the section and return it.
- (xtensa_switch_to_literal_fragment): Adjust for cache_literal_section.
- (xtensa_switch_to_non_abs_literal_fragment): Likewise.
- (xtensa_create_property_segments, xtensa_create_xproperty_segments):
- Use xtensa_get_property_section from bfd.
- (retrieve_xtensa_section): Delete.
- * doc/c-xtensa.texi (Xtensa Options): Fix --text-section-literals
- description to refer to plural literal sections and add xref to
- the Literal Directive section.
- (Literal Directive): Describe new rules for deriving literal section
- names. Add footnote for special case of .init/.fini with
- --text-section-literals.
- (Literal Prefix Directive): Replace old naming rules with xref to the
- Literal Directive section.
-
-2006-08-21 Joseph Myers <joseph@codesourcery.com>
-
- * config/tc-arm.c (s_arm_unwind_save_mmxwr): Correct condition for
- merging with previous long opcode.
-
-2006-08-22 Pedro Alves <pedro_alves@portugalmail.pt>
-
- * Makefile.am (TARG_ENV_HFILES): Add te-wince-pe.h.
- * Makefile.in: Regenerate.
- * config/tc-arm.h [TARGET_FORMAT]: ARM wince bfd names were
- renamed. Adjust.
+ * config/tc-i386.c (build_modrm_byte): For instructions with 2
+ register operands, encode destination in i.rm.regmem if its
+ RegMem bit is set.
-2006-08-16 Julian Brown <julian@codesourcery.com>
-
- * config/tc-arm.c (md_assemble): Improve diagnostic when attempting
- to use ARM instructions on non-ARM-supporting cores.
- (autoselect_thumb_from_cpu_variant): New function. Switch on Thumb
- mode automatically based on cpu variant.
- (md_begin): Call above function.
+2007-03-28 Richard Sandiford <richard@codesourcery.com>
+ Phil Edwards <phil@codesourcery.com>
-2006-08-16 Julian Brown <julian@codesourcery.com>
+ * doc/as.texinfo: Put the contents after the title page rather
+ than at the end of the document.
- * config/tc-arm.c (opcode_lookup): Allow Neon type suffixes to be
- recognized in non-unified syntax mode.
+2007-03-27 Alan Modra <amodra@bigpond.net.au>
-2006-08-15 Thiemo Seufer <ths@mips.com>
- Nigel Stephens <nigel@mips.com>
- David Ung <davidu@mips.com>
+ * NEWS: Mention ".reloc".
- * configure.tgt: Handle mips*-sde-elf*.
+2007-03-26 Sterling Augustine <sterling@tensilica.com>
+
+ * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
+ in FLIX instructions.
+
+2007-03-26 Julian Brown <julian@codesourcery.com>
-2006-08-12 Thiemo Seufer <ths@networkno.de>
+ * config/tc-arm.c (arm_it): Add immisfloat field.
+ (parse_qfloat_immediate): Disallow integer syntax for floating-point
+ immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
+ (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
+ float.
+ (neon_cmode_for_move_imm): Reject non-float immediates for float
+ operands.
+ (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
- * config/tc-mips.c (mips16_ip): Fix argument register handling
- for restore instruction.
+2007-03-26 Julian Brown <julian@codesourcery.com>
-2006-08-08 Bob Wilson <bob.wilson@acm.org>
+ * doc/c-arm.texi: Add documentation for .dn/.qn directives.
- * dwarf2dbg.c (DWARF2_USE_FIXED_ADVANCE_PC): New.
- (out_sleb128): New.
- (out_fixed_inc_line_addr): New.
- (process_entries): Use out_fixed_inc_line_addr when
- DWARF2_USE_FIXED_ADVANCE_PC is set.
- * config/tc-xtensa.h (DWARF2_USE_FIXED_ADVANCE_PC): Define.
+2007-03-26 Alan Modra <amodra@bigpond.net.au>
-2006-08-08 DJ Delorie <dj@redhat.com>
+ * doc/as.texinfo (Reloc): Document.
+ * read.c (potable): Add "reloc".
+ (s_reloc): New function.
+ * write.c (reloc_list): New global var.
+ (resolve_reloc_expr_symbols): New function.
+ (write_object_file): Call it.
+ (write_relocs): Process reloc_list.
+ * write.h (struct reloc_list): New.
+ (reloc_list): Declare.
- * config/tc-sh.c (sh_frob_section): Canonicalize pointers to local
- vs full symbols so that we never have more than one pointer value
- for any given symbol in our symbol table.
+2007-03-24 Paul Brook <paul@codesourcery.com>
-2006-08-08 Sterling Augustine <sterling@tensilica.com>
+ * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
- * dwarf2dbg.c (out_debug_info): Add new parameter ranges_seg
- and emit DW_AT_ranges when code in compilation unit is not
- contiguous.
- (out_debug_abbrev): Emit DW_AT_ranges abbreviation if code in
- is not contiguous.
- (dwarf2_finish): Create and pass ranges_seg to out_debug_info.
- (out_debug_ranges): New function to emit .debug_ranges section
- when code is not contiguous.
+2007-03-24 Paul Brook <paul@codesourcery.com>
+ Mark Shinwell <shinwell@codesourcery.com>
-2006-08-08 Nick Clifton <nickc@redhat.com>
+ * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
+ (parse_operands): Don't expect comma if first operand missing.
+ Handle OP_oRRw.
+ (do_srs): Encode register number, checking it is r13. Update comment.
+ (insns): Update SRS entries to take a register.
- * config/tc-arm.c (WARN_DEPRECATED): Enable.
+2007-03-23 H.J. Lu <hongjiu.lu@intel.com>
-2006-08-05 Pedro Alves <pedro_alves@portugalmail.pt>
+ * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
- * config/tc-arm.c: Move "dwarf2dbg.h" inclusion out of OBJ_ELF
- only block.
- (pe_directive_secrel) [TE_PE]: New function.
- (md_pseudo_table) [!OBJ_ELF]: Handle 2byte, 4byte, 8byte, file,
- loc, loc_mark_labels.
- [TE_PE]: Handle secrel32.
- (output_relax_insn): Remove OBJ_ELF around dwarf2_emit_insn
- call.
- (output_inst): Remove OBJ_ELF around dwarf2_emit_insn call.
- (arm_frob_label): Remove OBJ_ELF around dwarf2_emit_label call.
- (md_section_align): Only round section sizes here for AOUT
- targets.
- (tc_arm_regname_to_dw2regnum): Move out for OBJ_ELF only block.
- (tc_pe_dwarf2_emit_offset): New function.
- (md_apply_fix) [TE_PE]: Handle BFD_RELOC_32_SECREL.
- (cons_fix_new_arm): Handle O_secrel.
- * config/tc-arm.h : Move DWARF2_LINE_MIN_INSN_LENGTH,
- DWARF2_DEFAULT_RETURN_COLUMN and DWARF2_CIE_DATA_ALIGNMENT out
- of OBJ_ELF only block.
- [TE_PE]: Define O_secrel, TC_DWARF2_EMIT_OFFSET, and declare
- tc_pe_dwarf2_emit_offset.
+2007-03-23 Mark Shinwell <shinwell@codesourcery.com>
-2006-08-04 Richard Sandiford <richard@codesourcery.com>
+ * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
+ attempt to jump to the next instruction into NOPs.
- * config/tc-sh.c (apply_full_field_fix): New function.
- (md_apply_fix): Use it instead of md_number_to_chars. Do not fill
- in fx_addnumber for BFD_RELOC_32_PLT_PCREL.
- (tc_gen_reloc): Use fx_addnumber rather than 0 as the default case.
- * config/tc-sh.h (TARGET_FORMAT): Override for TE_VXWORKS.
+2007-03-23 Alan Modra <amodra@bigpond.net.au>
-2006-08-03 Nick Clifton <nickc@redhat.com>
+ * config/tc-spu.c: Don't include opcode/spu.h.
+ (md_assemble): Set tc_fix_data.insn_tag and arg_format.
+ (md_apply_fix): Adjust.
+ * config/tc-spu.h: Include opcode/spu.h.
+ (struct tc_fix_info): New.
+ (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
+ (TC_FORCE_RELOCATION): Define.
- PR gas/2991
- * config.in: Regenerate.
+2007-03-22 Joseph Myers <joseph@codesourcery.com>
-2006-08-03 Joseph Myers <joseph@codesourcery.com>
+ * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
- * config/tc-arm.c (parse_operands): Handle invalid register name
- for OP_RIWR_RIWC.
+2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
-2006-08-03 Joseph Myers <joseph@codesourcery.com>
+ * config/tc-i386.c (process_suffix): Check 0x90 instead of
+ xchg for xchg %rax,%rax.
- * config/tc-arm.c (enum operand_parse_code): Add OP_RIWC_RIWG.
- (parse_operands): Handle it.
- (insns): Use it for tmcr and tmrc.
+2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
-2006-08-02 Petr Salinger <Petr.Salinger@seznam.cz>
+ * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
+ and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
- PR binutils/2983
- * config/tc-i386.c (md_parse_option): Treat any target starting
- with elf64_x86_64 as a viable target for the -64 switch.
- (i386_target_format): For 64-bit ELF flavoured output use
- ELF_TARGET_FORMAT64.
- * config/tc-i386.h (ELF_TARGET_FORMAT64): Define.
+2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
-2006-08-02 Nick Clifton <nickc@redhat.com>
+ PR binutils/4218
+ * config/tc-i386.c (match_template): Properly handle 64bit mode
+ "xchg %eax, %eax".
- PR gas/2991
- * acinclude.m4 (BFD_BINARY_FOPEN): Import this function from
- bfd/aclocal.m4.
- * configure.in: Run BFD_BINARY_FOPEN.
- * configure: Regenerate.
- * as.h: Look at USE_BINARY_FOPEN to decide which fopen-*.h header
- file to include.
+2007-03-21 Anton Ertl <anton@mips.complang.tuw>
-2006-08-01 H.J. Lu <hongjiu.lu@intel.com>
+ PR gas/4124
+ * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
- * config/tc-i386.c (md_assemble): Don't update
- cpu_arch_isa_flags.
+2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
-2006-08-01 Thiemo Seufer <ths@mips.com>
+ * Makefile.am: Run dep-am.
+ * Makefile.in: Regenerated.
- * config/tc-mips.c (md_section_align): Check ELF-ness at runtime.
+ * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
-2006-08-01 Thiemo Seufer <ths@mips.com>
+ * config/tc-i386.h: Include "opcodes/i386-opc.h".
+ (NOP_OPCODE): Removed.
+ (template): Likewise.
- * config/tc-mips.c (macro_build_lui): Fix comment formatting.
- (md_apply_fix): Likewise. Unify handling of BFD_RELOC_RVA,
- BFD_RELOC_32 and BFD_RELOC_16.
- (s_align, s_cpload, s_cplocal, s_cprestore, s_mips_stab,
- md_convert_frag, md_obj_end): Fix comment formatting.
+2007-03-21 Andreas Schwab <schwab@suse.de>
-2006-07-31 Thiemo Seufer <ths@mips.com>
+ * config/tc-i386.h (NOP_OPCODE): Restore.
- * config/tc-mips.c (md_apply_fix, tc_gen_reloc): Remove special
- handling for BFD_RELOC_MIPS16_JMP.
+2007-03-18 Mark Shinwell <shinwell@codesourcery.com>
-2006-07-24 Andreas Schwab <schwab@suse.de>
+ * config/tc-arm.c (do_mul): Don't warn about overlapping
+ Rd and Rm operands when assembling for v6 or above.
+ Correctly capitalize register names in the messages.
+ (do_mlas): Likewise. Delete spurious blank line.
- PR/2756
- * read.c (read_a_source_file): Ignore unknown text after line
- comment character. Fix misleading comment.
+2007-03-16 Kazu Hirata <kazu@codesourcery.com>
-2006-07-24 Ralk Wildenhues <Ralf.Wildenhues@gmx.de>
+ * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
- * doc/all.texi, doc/as.texinfo, doc/c-arc.texi, doc/c-arm.texi,
- doc/c-avr.texi, doc/c-bfin.texi, doc/c-i386.texi,
- doc/c-i960.texi, doc/c-m32r.texi, doc/c-m68k.texi,
- doc/c-mmix.texi, doc/c-pdp11.texi, doc/c-ppc.texi,
- doc/c-tic54x.texi, doc/c-v850.texi, doc/c-xtensa.texi,
- doc/c-z80.texi, doc/internals.texi: Fix some typos.
+2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
-2006-07-21 Nick Clifton <nickc@redhat.com>
+ * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
+ i386_regtab.
+ (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
+ on i386_regtab.
- * config/tc-sh.c (md_longopts): Add -EL and -EB for use by the
- linker testsuite.
+2007-03-15 Alexandre Oliva <aoliva@redhat.com>
-2006-07-20 Thiemo Seufer <ths@mips.com>
- Nigel Stephens <nigel@mips.com>
+ PR gas/4184
+ * app.c (do_scrub_chars): PUT after setting states.
- * config/tc-mips.c (md_parse_option): Don't infer optimisation
- options from debug options.
+2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
-2006-07-20 Thiemo Seufer <ths@mips.com>
+ * Makefile.am: Run "make dep-am".
+ * Makefile.in: Regenerated.
- * config/tc-mips.c (mips_fix_adjustable): Handle BFD_RELOC_MIPS16_JMP.
- (tc_gen_reloc): Handle mips16 jumps to section symbol offsets.
+ * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
+ "opcode/i386.h".
+ (md_begin): Check reg_name != NULL for the last entry in
+ i386_regtab.
-2006-07-19 Paul Brook <paul@codesourcery.com>
+ * config/tc-i386.h: Move many entries to opcode/i386.h and
+ opcodes/i386-opc.h.
- * config/tc-arm.c (insns): Fix rbit Arm opcode.
+ * configure.in (need_opcodes): Set true for i386.
+ * configure: Regenerated.
-2006-07-18 Paul Brook <paul@codesourcery.com>
+2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
- * tc-arm.c (do_t_add_sub): Use addw/subw when source is PC.
- (md_convert_frag): Use correct reloc for add_pc. Use
- BFD_RELOC_ARM_T32_ADD_IMM for normal add/sum.
- (md_apply_fix): Handle BFD_RELOC_ARM_T32_ADD_IMM.
- (arm_force_relocation): Handle BFD_RELOC_ARM_T32_ADD_IMM.
+ * Makefile.am (REPORT_BUGS_TO): Removed.
+ (INCLUDES): Remove -DREPORT_BUGS_TO.
+ * Makefile.in: Regenerated.
-2006-07-17 Mat Hostetter <mat@lcs.mit.edu>
+ * configure.in (--with-bugurl): Removed.
+ * configure: Regenerated.
- * symbols.c (report_op_error): Fix pasto. Don't use as_bad_where
- when file and line unknown.
+ * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
+ (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
+ (TEXI2DVI): Likewise.
+ (gasver.texi): Removed.
+ (MOSTLYCLEANFILES): Remove gasver.texi.
+ (as.1): Don't depend on gasver.texi.
+ * doc/Makefile.in: Regenerated.
-2006-07-17 Thiemo Seufer <ths@mips.com>
+ * doc/as.texi: Include bfdver.texi instead of gasver.texi.
- * read.c (s_struct): Use IS_ELF.
- * config/tc-mips.c (md_begin, mips16_mark_labels, mips_ip,
- md_parse_option, s_change_sec, pic_need_relax, mips_fix_adjustable,
- tc_gen_reloc, mips_frob_file_after_relocs, s_mips_end, s_mips_frame,
- s_mips_mask): Likewise.
+2007-03-14 Daniel Jacobowitz <dan@codesourcery.com>
-2006-07-16 Thiemo Seufer <ths@mips.com>
- David Ung <davidu@mips.com>
+ * config/tc-arm.c (arm_copy_symbol_attributes): New.
+ * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
+ (TC_COPY_SYMBOL_ATTRIBUTES): Define.
+ * gas/symbols.c (copy_symbol_attributes): Use
+ TC_COPY_SYMBOL_ATTRIBUTES.
- * read.c (s_struct): Handle ELF section changing.
- * config/tc-mips.c (s_align): Leave enabling auto-align to the
- generic code.
- (s_change_sec): Try section changing only if we output ELF.
+2007-03-14 Paul Brook <paul@codesourcery.com>
-2006-07-15 H.J. Lu <hongjiu.lu@intel.com>
+ * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
- * config/tc-i386.c (cpu_arch): Remove Cpu086, CpuAthlon and
- CpuAmdFam10.
- (smallest_imm_type): Remove Cpu086.
- (i386_target_format): Likewise.
+2007-03-14 Alan Modra <amodra@bigpond.net.au>
- * config/tc-i386.h: Remove Cpu086, CpuAthlon and CpuAmdFam10.
- Update CpuXXX.
+ PR 4029
+ * write.c (relax_segment): Insert extra alignment padding
+ to break infinite relax loop when given impossible
+ gcc_except_table assembly.
-2006-07-13 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
- Michael Meissner <michael.meissner@amd.com>
+2007-03-12 H.J. Lu <hongjiu.lu@intel.com>
- * config/tc-i386.h (PROCESSOR_AMDFAM10): New processor_type.
- (CpuSSE4a, CpuABM, CpuAmdFam10): New Cpu directives.
- * config/tc-i386.c (cpu_arch): Add support for AmdFam10
- architecture.
- (i386_align_code): Ditto.
- (md_assemble_code): Add support for insertq/extrq instructions,
- swapping as needed for intel syntax.
- (swap_imm_operands): New function to swap immediate operands.
- (swap_operands): Deal with 4 operand instructions.
- (build_modrm_byte): Add support for insertq instruction.
+ * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
+ on i.tm.base_opcode.
+ (match_template): Likewise.
+ (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
-2006-07-13 H.J. Lu <hongjiu.lu@intel.com>
+ * config/tc-i386.h (Opcode_D): New.
+ (Opcode_FloatR): Likewise.
+ (Opcode_FloatD): Likewise.
+ (D): Redefined.
+ (W): Likewise.
+ (FloatMF): Likewise.
+ (FloatR): Likewise.
+ (FloatD): Likewise.
- * config/tc-i386.h (Size64): Fix a typo in comment.
+2007-03-09 Alexandre Oliva <aoliva@redhat.com>
-2006-07-12 Nick Clifton <nickc@redhat.com>
+ * app.c (do_scrub_chars): Recognize comments after # line "file".
+ * read.c (get_linefile_number): New.
+ (s_app_line): Accept ill-formed .linefile lines as comments.
- * config/tc-sh.c (md_apply_fix): Do not allow the generic code in
- fixup_segment() to repeat a range check on a value that has
- already been checked here.
+2007-03-09 Alan Modra <amodra@bigpond.net.au>
-2006-07-07 James E Wilson <wilson@specifix.com>
+ * config/tc-i386.h (WORKING_DOT_WORD): Define.
- * config/tc-mips.c (mips_cpu_info_table): Add sb1a.
+2007-03-09 Alexandre Oliva <aoliva@redhat.com>
-2006-07-06 Mohammed Adnène Trojette <adn@diwi.org>
- Nick Clifton <nickc@redhat.com>
+ * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
+ * as.h (new_logical_line_flags): New.
+ * input-scrub.c (new_logical_line): Turned into wrapper for...
+ (new_logical_line_flags): this. Handle flags.
+ * read.c (potable): Add linefile. Adjust appline argument.
+ (s_app_file): Fake .appfiles no more.
+ (s_app_line): For .linefile, accept file name and flags.
- PR binutils/2877
- * doc/as.texi: Fix spelling typo: branchs => branches.
- * doc/c-m68hc11.texi: Likewise.
- * config/tc-m68hc11.c: Likewise.
- Support old spelling of command line switch for backwards
- compatibility.
-
-2006-07-04 Thiemo Seufer <ths@mips.com>
- David Ung <davidu@mips.com>
-
- * config/tc-mips.c (s_is_linkonce): New function.
- (mips16_mark_labels): Don't adjust mips16 symbol addresses for
- weak, external, and linkonce symbols.
- (pic_need_relax): Use s_is_linkonce.
-
-2006-06-24 H.J. Lu <hongjiu.lu@intel.com>
-
- * doc/as.texinfo (Org): Remove space.
- (P2align): Add "@var{abs-expr},".
-
-2006-06-23 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (cpu_arch_tune_set): New.
- (cpu_arch_isa): Likewise.
- (i386_align_code): Use xchg %ax,%ax for 2 byte nop. Optimize
- nops with short or long nop sequences based on -march=/.arch
- and -mtune=.
- (set_cpu_arch): Set cpu_arch_isa. If cpu_arch_tune_set is 0,
- set cpu_arch_tune and cpu_arch_tune_flags.
- (md_parse_option): For -march=, set cpu_arch_isa and set
- cpu_arch_tune and cpu_arch_tune_flags if cpu_arch_tune_set is
- 0. Set cpu_arch_tune_set to 1 for -mtune=.
- (i386_target_format): Don't set cpu_arch_tune.
-
-2006-06-23 Nigel Stephens <nigel@mips.com>
-
- * config/tc-mips.c (nopic_need_relax): Handle -fdata-sections
- generated .sbss.* and .gnu.linkonce.sb.*.
-
-2006-06-23 Thiemo Seufer <ths@mips.com>
- David Ung <davidu@mips.com>
-
- * config/tc-mips.h (TC_SEGMENT_INFO_TYPE): Declare per-segment
- label_list.
- * config/tc-mips.c (label_list): Define per-segment label_list.
- (mips_clear_insn_labels, mips_move_labels, mips16_mark_labels,
- append_insn, s_align, s_cons, s_float_cons, s_gpword, s_gpdword,
- mips_from_file_after_relocs, mips_define_label): Use per-segment
- label_list.
-
-2006-06-22 Thiemo Seufer <ths@mips.com>
-
- * config/tc-mips.c (ISA_SUPPORTS_MIPS16E): New macro.
- (append_insn): Use it.
- (md_apply_fix): Whitespace formatting.
- (md_begin, append_insn, macro, macro2, mips16_immed, mips_align,
- mips16_extended_frag): Remove register specifier.
- (md_convert_frag): Likewise. Use TRUE ans FALSE instead of numeric
- constants.
-
-2006-06-21 Mark Shinwell <shinwell@codesourcery.com>
-
- * config/tc-arm.c (s_arm_unwind_save_vfp_armv6): New. Parse
- a directive saving VFP registers for ARMv6 or later.
- (s_arm_unwind_save): Add parameter arch_v6 and call
- s_arm_unwind_save_vfp or s_arm_unwind_save_vfp_armv6 as
- appropriate.
- (md_pseudo_table): Add entry for new "vsave" directive.
- * doc/c-arm.texi: Correct error in example for "save"
- directive (fstmdf -> fstmdx). Also document "vsave" directive.
-
-2006-06-18 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
- Anatoly Sokolov <aesok@post.ru>
-
- * config/tc-avr.c (mcu_types): Add support for atmega165p, atmega169p
- and atmega644p devices. Rename atmega164/atmega324 devices to
- atmega164p/atmega324p.
- * doc/c-avr.texi: Document new mcu and arch options.
-
-2006-06-17 Nick Clifton <nickc@redhat.com>
-
- * config/tc-arm.c (enum parse_operand_result): Move outside of
- #ifdef OBJ_ELF so that non-ELF targeted ARM ports can build.
-
-2006-06-16 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.h (processor_type): New.
- (arch_entry): Add type.
-
- * config/tc-i386.c (cpu_arch_tune): New.
- (cpu_arch_tune_flags): Likewise.
- (cpu_arch_isa_flags): Likewise.
- (cpu_arch): Updated.
- (set_cpu_arch): Also update cpu_arch_isa_flags.
- (md_assemble): Update cpu_arch_isa_flags.
- (OPTION_MARCH): New.
- (OPTION_MTUNE): Likewise.
- (md_longopts): Add -march= and -mtune=.
- (md_parse_option): Support -march= and -mtune=.
- (md_show_usage): Add -march=CPU/-mtune=CPU.
- (i386_target_format): Also update cpu_arch_isa_flags,
- cpu_arch_tune and cpu_arch_tune_flags.
-
- * doc/as.texinfo: Add -march=CPU/-mtune=CPU.
-
- * doc/c-i386.texi: Document -march=CPU/-mtune=CPU.
-
-2006-06-15 Mark Shinwell <shinwell@codesourcery.com>
-
- * config/tc-arm.c (enum parse_operand_result): New.
- (struct group_reloc_table_entry): New.
- (enum group_reloc_type): New.
- (group_reloc_table): New array.
- (find_group_reloc_table_entry): New function.
- (parse_shifter_operand_group_reloc): New function.
- (parse_address_main): New function, incorporating code
- from the old parse_address function. To be used via...
- (parse_address): wrapper for parse_address_main; and
- (parse_address_group_reloc): new function, likewise.
- (enum operand_parse_code): New codes OP_SHG, OP_ADDRGLDR,
- OP_ADDRGLDRS, OP_ADDRGLDC.
- (parse_operands): Support for these new operand codes.
- New macro po_misc_or_fail_no_backtrack.
- (encode_arm_cp_address): Preserve group relocations.
- (insns): Modify to use the above operand codes where group
- relocations are permitted.
- (md_apply_fix): Handle the group relocations
- ALU_PC_G0_NC through LDC_SB_G2.
- (tc_gen_reloc): Likewise.
- (arm_force_relocation): Leave group relocations for the linker.
- (arm_fix_adjustable): Likewise.
-
-2006-06-15 Julian Brown <julian@codesourcery.com>
-
- * config/tc-arm.c (do_vfp_nsyn_ldr_str): Remove, fold into...
- (do_neon_ldr_str): Always defer to VFP encoding routines, which handle
- relocs properly.
-
-2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (process_suffix): Don't add rex64 for
- "xchg %rax,%rax".
-
-2006-06-09 Thiemo Seufer <ths@mips.com>
-
- * config/tc-mips.c (mips_ip): Maintain argument count.
-
-2006-06-09 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-iq2000.c: Include sb.h.
-
-2006-06-08 Nigel Stephens <nigel@mips.com>
-
- * config/tc-mips.c (mips_pseudo_table): Add "origin" and "repeat"
- aliases for better compatibility with SGI tools.
-
-2006-06-08 Alan Modra <amodra@bigpond.net.au>
-
- * configure.in (BFDLIB, BFDVER_H, ALL_OBJ_DEPS): Delete.
- * Makefile.am (GASLIBS): Expand @BFDLIB@.
- (BFDVER_H): Delete.
- (OBJS): Expand @ALL_OBJ_DEPS@. Depend on all fopen-*.h variants.
- (obj-aout.o): Depend on $(DEP_@target_get_type@_aout)
- (obj-coff.o, obj-ecoff.o, obj-elf.o): Similarly.
- Run "make dep-am".
- * dep-in.sed: Don't substitute bfdver.h. Do remove symcat.h.
- * Makefile.in: Regenerate.
- * doc/Makefile.in: Regenerate.
- * configure: Regenerate.
+2007-03-08 Alan Modra <amodra@bigpond.net.au>
-2006-06-07 Joseph S. Myers <joseph@codesourcery.com>
-
- * po/Make-in (pdf, ps): New dummy targets.
-
-2006-06-07 Julian Brown <julian@codesourcery.com>
-
- * config/tc-arm.c (stdarg.h): include.
- (arm_it): Add uncond_value field. Add isvec and issingle to operand
- array.
- (arm_reg_type): Add REG_TYPE_VFSD (single or double VFP reg) and
- REG_TYPE_NSDQ (single, double or quad vector reg).
- (reg_expected_msgs): Update.
- (BAD_FPU): Add macro for unsupported FPU instruction error.
- (parse_neon_type): Support 'd' as an alias for .f64.
- (parse_typed_reg_or_scalar): Support REG_TYPE_VFSD, REG_TYPE_NSDQ
- sets of registers.
- (parse_vfp_reg_list): Don't update first arg on error.
- (parse_neon_mov): Support extra syntax for VFP moves.
- (operand_parse_code): Add OP_RVSD, OP_RNSDQ, OP_VRSDLST, OP_RVSD_IO,
- OP_RNSDQ_RNSC, OP_RVC_PSR, OP_APSR_RR, OP_oRNSDQ.
- (parse_operands): Support isvec, issingle operands fields, new parse
- codes above.
- (do_vfp_nsyn_mrs, do_vfp_nsyn_msr): New functions. Support VFP mrs,
- msr variants.
- (do_mrs, do_msr, do_t_mrs, do_t_msr): Add support for above.
- (NEON_ENC_TAB): Add vnmul, vnmla, vnmls, vcmp, vcmpz, vcmpe, vcmpez.
- (NEON_ENC_SINGLE, NEON_ENC_DOUBLE): Define macros.
- (NEON_SHAPE_DEF): New macro. Define table of possible instruction
- shapes.
- (neon_shape): Redefine in terms of above.
- (neon_shape_class): New enumeration, table of shape classes.
- (neon_shape_el): New enumeration. One element of a shape.
- (neon_shape_el_size): Register widths of above, where appropriate.
- (neon_shape_info): New struct. Info for shape table.
- (neon_shape_tab): New array.
- (neon_type_mask): Add N_F64, N_VFP. Update N_MAX_NONSPECIAL.
- (neon_check_shape): Rewrite as...
- (neon_select_shape): New function to classify instruction shapes,
- driven by new table neon_shape_tab array.
- (neon_quad): New function. Return 1 if shape should set Q flag in
- instructions (or equivalent), 0 otherwise.
- (type_chk_of_el_type): Support F64.
- (el_type_of_type_chk): Likewise.
- (neon_check_type): Add support for VFP type checking (VFP data
- elements fill their containing registers).
- (do_vfp_cond_or_thumb): Fill in condition field in ARM mode, or 0xE
- in thumb mode for VFP instructions.
- (do_vfp_nsyn_opcode): New function. Look up the opcode in argument,
- and encode the current instruction as if it were that opcode.
- (try_vfp_nsyn): New. If this looks like a VFP instruction with ARGS
- arguments, call function in PFN.
- (do_vfp_nsyn_add_sub, do_vfp_nsyn_mla_mls, do_vfp_nsyn_mul)
- (do_vfp_nsyn_abs_neg, do_vfp_nsyn_ldm_stm, do_vfp_nsyn_ldr_str)
- (do_vfp_nsyn_sqrt, do_vfp_nsyn_div, do_vfp_nsyn_nmul)
- (do_vfp_nsyn_cmp, nsyn_insert_sp, do_vfp_nsyn_push)
- (do_vfp_nsyn_pop, do_vfp_nsyn_cvt, do_vfp_nsyn_cvtz): New functions.
- Redirect Neon-syntax VFP instructions to VFP instruction handlers.
- (do_neon_dyadic_i_su, do_neon_dyadic_i64_su, do_neon_shl_imm)
- (do_neon_qshl_imm, do_neon_logic, do_neon_bitfield)
- (neon_dyadic_misc, neon_compare, do_neon_tst, do_neon_qdmulh)
- (do_neon_fcmp_absolute, do_neon_step, do_neon_sli, do_neon_sri)
- (do_neon_qshlu_imm, neon_move_immediate, do_neon_mvn, do_neon_ext)
- (do_neon_rev, do_neon_dup, do_neon_rshift_round_imm, do_neon_trn)
- (do_neon_zip_uzp, do_neon_sat_abs_neg, do_neon_pair_long)
- (do_neon_recip_est, do_neon_cls, do_neon_clz, do_neon_cnt)
- (do_neon_swp): Use neon_select_shape not neon_check_shape. Use
- neon_quad.
- (vfp_or_neon_is_neon): New function. Call if a mnemonic shared
- between VFP and Neon turns out to belong to Neon. Perform
- architecture check and fill in condition field if appropriate.
- (do_neon_addsub_if_i, do_neon_mac_maybe_scalar, do_neon_abs_neg)
- (do_neon_cvt): Add support for VFP variants of instructions.
- (neon_cvt_flavour): Extend to cover VFP conversions.
- (do_neon_mov): Rewrite to use neon_select_shape. Add support for VFP
- vmov variants.
- (do_neon_ldr_str): Handle single-precision VFP load/store.
- (do_neon_ld_st_interleave, do_neon_ld_st_lane, do_neon_ld_dup): Use
- NS_NULL not NS_IGNORE.
- (opcode_tag): Add OT_csuffixF for operands which either take a
- conditional suffix, or have 0xF in the condition field.
- (md_assemble): Add support for OT_csuffixF.
- (NCE): Replace macro with...
- (NCE_tag, NCE, NCEF): New macros.
- (nCE): Replace macro with...
- (nCE_tag, nCE, nCEF): New macros.
- (insns): Add support for VFP insns or VFP versions of insns msr,
- mrs, vsqrt, vdiv, vnmul, vnmla, vnmls, vcmp, vcmpe, vpush, vpop,
- vcvtz, vmul, vmla, vmls, vadd, vsub, vabs, vneg, vldm, vldmia,
- vldbdb, vstm, vstmia, vstmdb, vldr, vstr, vcvt, vmov. Group shared
- VFP/Neon insns together.
-
-2006-06-07 Alan Modra <amodra@bigpond.net.au>
- Ladislav Michl <ladis@linux-mips.org>
-
- * app.c: Don't include headers already included by as.h.
- * as.c: Likewise.
- * atof-generic.c: Likewise.
- * cgen.c: Likewise.
- * dwarf2dbg.c: Likewise.
- * expr.c: Likewise.
- * input-file.c: Likewise.
- * input-scrub.c: Likewise.
- * macro.c: Likewise.
- * output-file.c: Likewise.
- * read.c: Likewise.
- * sb.c: Likewise.
- * config/bfin-lex.l: Likewise.
- * config/obj-coff.h: Likewise.
- * config/obj-elf.h: Likewise.
- * config/obj-som.h: Likewise.
- * config/tc-arc.c: Likewise.
- * config/tc-arm.c: Likewise.
- * config/tc-avr.c: Likewise.
- * config/tc-bfin.c: Likewise.
- * config/tc-cris.c: Likewise.
- * config/tc-d10v.c: Likewise.
- * config/tc-d30v.c: Likewise.
- * config/tc-dlx.h: Likewise.
- * config/tc-fr30.c: Likewise.
- * config/tc-frv.c: Likewise.
- * config/tc-h8300.c: Likewise.
- * config/tc-hppa.c: Likewise.
- * config/tc-i370.c: Likewise.
- * config/tc-i860.c: Likewise.
- * config/tc-i960.c: Likewise.
- * config/tc-ip2k.c: Likewise.
- * config/tc-iq2000.c: Likewise.
- * config/tc-m32c.c: Likewise.
- * config/tc-m32r.c: Likewise.
- * config/tc-maxq.c: Likewise.
- * config/tc-mcore.c: Likewise.
- * config/tc-mips.c: Likewise.
- * config/tc-mmix.c: Likewise.
- * config/tc-mn10200.c: Likewise.
- * config/tc-mn10300.c: Likewise.
- * config/tc-msp430.c: Likewise.
- * config/tc-mt.c: Likewise.
- * config/tc-ns32k.c: Likewise.
- * config/tc-openrisc.c: Likewise.
- * config/tc-ppc.c: Likewise.
- * config/tc-s390.c: Likewise.
- * config/tc-sh.c: Likewise.
- * config/tc-sh64.c: Likewise.
- * config/tc-sparc.c: Likewise.
- * config/tc-tic30.c: Likewise.
- * config/tc-tic4x.c: Likewise.
- * config/tc-tic54x.c: Likewise.
- * config/tc-v850.c: Likewise.
- * config/tc-vax.c: Likewise.
- * config/tc-xc16x.c: Likewise.
- * config/tc-xstormy16.c: Likewise.
- * config/tc-xtensa.c: Likewise.
- * config/tc-z80.c: Likewise.
- * config/tc-z8k.c: Likewise.
- * macro.h: Don't include sb.h or ansidecl.h.
- * sb.h: Don't include stdio.h or ansidecl.h.
- * cond.c: Include sb.h.
- * itbl-lex.l: Include as.h instead of other system headers.
- * itbl-parse.y: Likewise.
- * itbl-ops.c: Similarly.
- * itbl-ops.h: Don't include as.h or ansidecl.h.
- * config/bfin-defs.h: Don't include bfd.h or as.h.
- * config/bfin-parse.y: Include as.h instead of other system headers.
-
-2006-06-06 Ben Elliston <bje@au.ibm.com>
- Anton Blanchard <anton@samba.org>
-
- * config/tc-ppc.c (parse_cpu): Handle "-mpower6".
- (md_show_usage): Document it.
- (ppc_setup_opcodes): Test power6 opcode flag bits.
- * doc/c-ppc.texi (PowerPC-Opts): Document "-mpower6".
-
-2006-06-06 Thiemo Seufer <ths@mips.com>
- Chao-ying Fu <fu@mips.com>
-
- * config/tc-mips.c (ISA_SUPPORTS_DSP64): New macro.
- (CPU_HAS_MIPS3D, CPU_HAS_MDMX, CPU_HAS_DSP, CPU_HAS_MT): Delete.
- (macro_build): Update comment.
- (mips_ip): Allow DSP64 instructions for MIPS64R2.
- (mips_after_parse_args): Remove uses of CPU_HAS_MIPS3D and
- CPU_HAS_MDMX.
- (mips_cpu_info): Fix formatting. Add MIPS_CPU_ASE_MIPS3D and
- MIPS_CPU_ASE_MDMX flags for sb1.
-
-2006-06-05 Thiemo Seufer <ths@mips.com>
-
- * config/tc-mips.c (macro_build): Use INSERT_OPERAND wherew
- appropriate.
- (mips16_macro_build): Use MIPS16_INSERT_OPERAND where appropriate.
- (mips_ip): Make overflowed/underflowed constant arguments in DSP
- and MT instructions a fatal error. Use INSERT_OPERAND where
- appropriate. Improve warnings for break and wait code overflows.
- Use symbolic constant of OP_MASK_COPZ.
- (mips16_ip): Use MIPS16_INSERT_OPERAND where appropriate.
-
-2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
-
- * po/Make-in (top_builddir): Define.
-
-2006-06-02 Joseph S. Myers <joseph@codesourcery.com>
-
- * doc/Makefile.am (TEXI2DVI): Define.
- * doc/Makefile.in: Regenerate.
- * doc/c-arc.texi: Fix typo.
+ * symbols.c (symbol_relc_make_sym): Comment typo fixes.
-2006-06-01 Alan Modra <amodra@bigpond.net.au>
+2007-03-08 Alan Modra <amodra@bigpond.net.au>
- * config/obj-ieee.c: Delete.
- * config/obj-ieee.h: Delete.
- * Makefile.am (OBJ_FORMATS): Remove ieee.
- (OBJ_FORMAT_CFILES, OBJ_FORMAT_HFILES): Similarly.
- (obj-ieee.o): Remove rule.
+ * Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
- * configure.in (atof): Remove tahoe.
- (OBJ_MAYBE_IEEE): Don't define.
- * configure: Regenerate.
- * config.in: Regenerate.
- * doc/Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
-2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
-
- * Makefile.am: Replace INTLLIBS and INTLDEPS with LIBINTL
- and LIBINTL_DEP everywhere.
- (INTLLIBS): Remove.
- (INCLUDES, DEP_INCLUDES): Use @INCINTL@.
- * acinclude.m4: Include new gettext macros.
- * configure.in: Use ZW_GNU_GETTEXT_SISTER_DIR and AM_PO_SUBDIRS.
- Remove local code for po/Makefile.
- * Makefile.in, configure, doc/Makefile.in: Regenerated.
-
-2006-05-30 Nick Clifton <nickc@redhat.com>
-
- * po/es.po: Updated Spanish translation.
-
-2006-05-06 Denis Chertykov <denisc@overta.ru>
-
- * doc/c-avr.texi: New file.
- * doc/Makefile.am (CPU_DOCS): Add c-avr.texi
- * doc/all.texi: Set AVR
- * doc/as.texinfo: Include c-avr.texi
-
-2006-05-28 Jie Zhang <jie.zhang@analog.com>
-
- * config/bfin-parse.y (check_macfunc): Loose the condition of
- calling check_multiply_halfregs ().
-
-2006-05-25 Jie Zhang <jie.zhang@analog.com>
-
- * config/bfin-parse.y (asm_1): Better check and deal with
- vector and scalar Multiply 16-Bit Operands instructions.
-
-2006-05-24 Nick Clifton <nickc@redhat.com>
-
- * config/tc-hppa.c: Convert to ISO C90 format.
- * config/tc-hppa.h: Likewise.
-
-2006-05-24 Carlos O'Donell <carlos@systemhalted.org>
- Randolph Chung <randolph@tausq.org>
-
- * config/tc-hppa.c (is_tls_gdidx, is_tls_ldidx, is_tls_dtpoff,
- is_tls_ieoff, is_tls_leoff): Define.
- (fix_new_hppa): Handle TLS.
- (cons_fix_new_hppa): Likewise.
- (pa_ip): Likewise.
- (md_apply_fix): Handle TLS relocs.
- * config/tc-hppa.h (hppa_fix_adjustable): Handle TLS.
-
-2006-05-24 Bjoern Haase <bjoern.m.haase@web.de>
-
- * config/tc-avr.c: Add new cpu targets avr6, avr2560 and avr2561.
-
-2006-05-23 Thiemo Seufer <ths@mips.com>
- David Ung <davidu@mips.com>
- Nigel Stephens <nigel@mips.com>
-
- [ gas/ChangeLog ]
- * config/tc-mips.c (ISA_SUPPORTS_SMARTMIPS): Rename.
- (ISA_SUPPORTS_DSP_ASE, ISA_SUPPORTS_MT_ASE, ISA_HAS_64BIT_FPRS,
- ISA_HAS_MXHC1): New macros.
- (HAVE_32BIT_FPRS): Use ISA_HAS_64BIT_FPRS instead of
- ISA_HAS_64BIT_REGS. Formatting fixes. Improved comments.
- (mips_cpu_info): Change to use combined ASE/IS_ISA flag.
- (MIPS_CPU_IS_ISA, MIPS_CPU_ASE_SMARTMIPS, MIPS_CPU_ASE_DSP,
- MIPS_CPU_ASE_MT, MIPS_CPU_ASE_MIPS3D, MIPS_CPU_ASE_MDMX): New defines.
- (mips_after_parse_args): Change default handling of float register
- size to account for 32bit code with 64bit FP. Better sanity checking
- of ISA/ASE/ABI option combinations.
- (s_mipsset): Support switching of GPR and FPR sizes via
- .set {g,f}p={32,64,default}. Better sanity checking for .set ASE
- options.
- (mips_elf_final_processing): We should record the use of 64bit FP
- registers in 32bit code but we don't, because ELF header flags are
- a scarce ressource.
- (mips_cpu_info_table): Add ASE flags for CPUs with mandatory ASE
- extensions. Add 4ksc, 4kec, 4kem, 4kep, 4ksd, m4kp, 24kec, 24kef,
- 24kex, 34kc, 34kf, 34kx, 25kf CPU definitions.
- (mips_cpu_info_from_isa): Use MIPS_CPU_IS_ISA.
- * doc/c-mips.texi: Document .set {g,f}p={32,64,default}. Document
- missing -march options. Document .set arch=CPU. Move .set smartmips
- to ASE page. Use @code for .set FOO examples.
-
-2006-05-23 Jie Zhang <jie.zhang@analog.com>
-
- * config/tc-bfin.c (bfin_start_line_hook): Bump line counters
- if needed.
-
-2006-05-23 Jie Zhang <jie.zhang@analog.com>
-
- * config/bfin-defs.h (bfin_equals): Remove declaration.
- * config/bfin-parse.y (asm_1): Remove "expr ASSIGN expr".
- * config/tc-bfin.c (bfin_name_is_register): Remove.
- (bfin_equals): Remove.
- * config/tc-bfin.h (TC_EQUAL_IN_INSN): Redefine as 1.
- (bfin_name_is_register): Remove declaration.
-
-2006-05-19 Thiemo Seufer <ths@mips.com>
- Nigel Stephens <nigel@mips.com>
-
- * config/tc-mipc.c (ISA_HAS_ODD_SINGLE_FPR): New define.
- (mips_oddfpreg_ok): New function.
- (mips_ip): Use it.
-
-2006-05-19 Thiemo Seufer <ths@mips.com>
- David Ung <davidu@mips.com>
-
- * config/tc-mips.h (tc_mips_regname_to_dw2regnum): Declare.
- * config/tc-mipc.c (ABI_NEEDS_64BIT_REGS, ISA_HAS_64BIT_REGS,
- ISA_HAS_DROR, ISA_HAS_ROR): Reformat.
- (regname, RTYPE_MASK, RTYPE_NUM, RTYPE_FPU, RTYPE_FCC, RTYPE_VEC,
- RTYPE_GP, RTYPE_CP0, RTYPE_PC, RTYPE_ACC, RTYPE_CCC, RNUM_MASK,
- RWARN, GENERIC_REGISTER_NUMBERS, FPU_REGISTER_NAMES,
- FPU_CONDITION_CODE_NAMES, COPROC_CONDITION_CODE_NAMES,
- N32N64_SYMBOLIC_REGISTER_NAMES, O32_SYMBOLIC_REGISTER_NAMES,
- SYMBOLIC_REGISTER_NAMES, MIPS16_SPECIAL_REGISTER_NAMES,
- MDMX_VECTOR_REGISTER_NAMES, MIPS_DSP_ACCUMULATOR_NAMES, reg_names,
- reg_names_o32, reg_names_n32n64): Define register classes.
- (reg_lookup): New function, use register classes.
- (md_begin): Reserve register names in the symbol table. Simplify
- OBJ_ELF defines.
- (mips_ip): Fix comment formatting. Handle symbolic COP0 registers.
- Use reg_lookup.
- (mips16_ip): Use reg_lookup.
- (tc_get_register): Likewise.
- (tc_mips_regname_to_dw2regnum): New function.
-
-2006-05-19 Thiemo Seufer <ths@mips.com>
-
- * config/tc-arm.c, config/tc-arm.h (tc_arm_regname_to_dw2regnum):
- Un-constify string argument.
- * config/tc-i386.c, config/tc-i386.h (tc_x86_regname_to_dw2regnum):
- Likewise.
- * config/tc-m68k.c, config/tc-m68k.h (tc_m68k_regname_to_dw2regnum):
- Likewise.
- * config/tc-ppc.c, config/tc-ppc.h (tc_ppc_regname_to_dw2regnum):
- Likewise.
- * config/tc-s390.c, config/tc-s390.h (tc_s390_regname_to_dw2regnum):
- Likewise.
- * config/tc-sh.c, config/tc-sh.h (sh_regname_to_dw2regnum):
- Likewise.
- * config/tc-sparc.c, config/tc-sparc.h (sparc_regname_to_dw2regnum):
- Likewise.
-
-2006-05-19 Nathan Sidwell <nathan@codesourcery.com>
-
- * gas/config/tc-m68k.c (m68k_init_arch): Move checking of
- cfloat/m68881 to correct architecture before using it.
-
-2006-05-16 Bjoern Haase <bjoern.m.haase@web.de>
-
- * config/tc-avr.h (TC_VALIDATE_FIX): Allow fixups for immediate
- constant values.
-
-2006-05-15 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (arm_adjust_symtab): Use
- bfd_is_arm_special_symbol_name.
-
-2006-05-15 Bob Wilson <bob.wilson@acm.org>
-
- * config/tc-xtensa.c (is_direct_call_opcode, is_branch_jmp_to_next,
- xg_assemble_vliw_tokens, xtensa_mark_narrow_branches,
- xtensa_fix_short_loop_frags, is_local_forward_loop, relax_frag_immed):
- Handle errors from calls to xtensa_opcode_is_* functions.
-
-2006-05-14 Thiemo Seufer <ths@mips.com>
-
- * config/tc-mips.c (macro_build): Test for currently active
- mips16 option.
- (mips16_ip): Reject invalid opcodes.
+2007-03-07 Joseph Myers <joseph@codesourcery.com>
-2006-05-11 Carlos O'Donell <carlos@codesourcery.com>
+ * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
+ bug-reporting URL.
+ * doc/Makefile.am (gasver.texi): Define BUGURL.
+ * doc/as.texinfo: Use BUGURL.
+ * Makefile.in, configure, doc/Makefile.in: Regenerate.
- * doc/as.texinfo: Rename "Index" to "AS Index",
- and "ABORT" to "ABORT (COFF)".
+2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
-2006-05-11 Paul Brook <paul@codesourcery.com>
+ * config/tc-s390.c (md_parse_option): z9-ec option added.
- * config/tc-arm.c (parse_half): New function.
- (operand_parse_code): Remove OP_Iffff. Add OP_HALF.
- (parse_operands): Ditto.
- (do_mov16): Reject invalid relocations.
- (do_t_mov16): Ditto. Use Thumb reloc numbers.
- (insns): Replace Iffff with HALF.
- (md_apply_fix): Add MOVW and MOVT relocs.
- (tc_gen_reloc): Ditto.
- * doc/c-arm.texi: Document relocation operators
+2007-03-02 Paul Brook <paul@codesourcery.com>
-2006-05-11 Paul Brook <paul@codesourcery.com>
+ * config/tc-arm.c (relax_immediate): Always return positive values.
+ (relaxed_symbol_addr): New function.
+ (relax_adr, relax_branch): Use it.
+ (arm_relax_frag): Pass strect argument. Adjust infinite loop check.
- * config/tc-arm.c (arm_fix_adjustable): Return 0 for function symbols.
+2007-03-01 Joseph Myers <joseph@codesourcery.com>
-2006-05-11 Thiemo Seufer <ths@mips.com>
+ * as.c (parse_args): Update copyright date.
- * config/tc-mips.c (append_insn): Don't check the range of j or
- jal addresses.
+2007-02-28 Nathan Sidwell <nathan@codesourcery.com>
-2006-05-11 Pedro Alves <pedro_alves@portugalmail.pt>
+ * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
- * config/tc-arm.c (md_pcrel_from_section): Force a bias for
- relocs against external symbols for WinCE targets.
- (md_apply_fix): Likewise.
+2007-02-28 Nick Clifton <nickc@redhat.com>
-2006-05-09 David Ung <davidu@mips.com>
-
- * config/tc-mips.c (append_insn): Only warn about an out-of-range
- j or jal address.
-
-2006-05-09 Nick Clifton <nickc@redhat.com>
-
- * config/tc-arm.c (arm_fix_adjustable): For COFF, convert fixups
- against symbols which are not going to be placed into the symbol
- table.
-
-2006-05-09 Ben Elliston <bje@au.ibm.com>
-
- * expr.c (operand): Remove `if (0 && ..)' statement and
- subsequently unused target_op label. Collapse `if (1 || ..)'
- statement.
- * app.c (do_scrub_chars): Remove unused case 0, as it is handled
- separately above the switch.
-
-2006-05-08 Nick Clifton <nickc@redhat.com>
+ PR gas/3797
+ * config/tc-d10v.c (do_assemble): Do not generate error messages,
+ just return -1 whenever a problem is encountered.
+ (md_assemble): If do_assemble returns -1 generate a non-fatal
+ error message and return.
PR gas/2623
- * config/tc-msp430.c (line_separator_character): Define as |.
-
-2006-05-08 Thiemo Seufer <ths@mips.com>
- Nigel Stephens <nigel@mips.com>
- David Ung <davidu@mips.com>
-
- * config/tc-mips.c (mips_set_options): Add ase_smartmips flag.
- (mips_opts): Likewise.
- (file_ase_smartmips): New variable.
- (ISA_HAS_ROR): SmartMIPS implements rotate instructions.
- (macro_build): Handle SmartMIPS instructions.
- (mips_ip): Likewise.
- (md_longopts): Add argument handling for smartmips.
- (md_parse_options, mips_after_parse_args): Likewise.
- (s_mipsset): Add .set smartmips support.
- (md_show_usage): Document -msmartmips/-mno-smartmips.
- * doc/as.texinfo: Document -msmartmips/-mno-smartmips and
- .set smartmips.
- * doc/c-mips.texi: Likewise.
-
-2006-05-08 Alan Modra <amodra@bigpond.net.au>
-
- * write.c (relax_segment): Add pass count arg. Don't error on
- negative org/space on first two passes.
- (relax_seg_info): New struct.
- (relax_seg, write_object_file): Adjust.
- * write.h (relax_segment): Update prototype.
-
-2006-05-05 Julian Brown <julian@codesourcery.com>
-
- * config/tc-arm.c (parse_vfp_reg_list): Improve register bounds
- checking.
- (do_neon_mov): Enable several VMOV variants for VFP. Add suitable
- architecture version checks.
- (insns): Allow overlapping instructions to be used in VFP mode.
-
-2006-05-05 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/2598
- * config/obj-elf.c (obj_elf_change_section): Allow user
- specified SHF_ALPHA_GPREL.
-
-2006-05-05 Bjoern Haase <bjoern.m.haase@web.de>
-
- * gas/config/tc-avr.h (TC_VALIDATE_FIX): Define. Disable fixups
- for PMEM related expressions.
-
-2006-05-05 Nick Clifton <nickc@redhat.com>
-
- PR gas/2582
- * dwarf2dbg.c (INSERT_DIR_SEPARATOR): New macro. Handles the
- insertion of a directory separator character into a string at a
- given offset. Uses heuristics to decide when to use a backslash
- character rather than a forward-slash character.
- (dwarf2_directive_loc): Use the macro.
- (out_debug_info): Likewise.
-
-2006-05-05 Thiemo Seufer <ths@mips.com>
- David Ung <davidu@mips.com>
-
- * config/tc-mips.c (macro_build): Add case 'k' to handle cache
- instruction.
- (macro): Add new case M_CACHE_AB.
-
-2006-05-04 Kazu Hirata <kazu@codesourcery.com>
-
- * config/tc-arm.c (opcode_tag): Add OT_cinfix3_deprecated.
- (opcode_lookup): Issue a warning for opcode with
- OT_cinfix3_deprecated. Otherwise treat OT_cinfix3_deprecated
- identical to OT_cinfix3.
- (TxC3w, TC3w, tC3w): New.
- (insns): Use tC3w and TC3w for comparison instructions with
- 's' suffix.
-
-2006-05-04 Alan Modra <amodra@bigpond.net.au>
-
- * subsegs.h (struct frchain): Delete frch_seg.
- (frchain_root): Delete.
- (seg_info): Define as macro.
- * subsegs.c (frchain_root): Delete.
- (abs_seg_info, und_seg_info, absolute_frchain): Delete.
- (subsegs_begin, subseg_change): Adjust for above.
- (subseg_set_rest): Likewise. Add new frchain structs to seginfo
- rather than to one big list.
- (subseg_get): Don't special case abs, und sections.
- (subseg_new, subseg_force_new): Don't set frchainP here.
- (seg_info): Delete.
- (subsegs_print_statistics): Adjust frag chain control list traversal.
- * debug.c (dmp_frags): Likewise.
- * dwarf2dbg.c (first_frag_for_seg): Don't start looking for frag
- at frchain_root. Make use of known frchain ordering.
- (last_frag_for_seg): Likewise.
- (get_frag_fix): Likewise. Add seg param.
- (process_entries, out_debug_aranges): Adjust get_frag_fix calls.
- * write.c (chain_frchains_together_1): Adjust for struct frchain.
- (SUB_SEGMENT_ALIGN): Likewise.
- (subsegs_finish): Adjust frchain list traversal.
- * config/tc-xtensa.c (xtensa_cleanup_align_frags): Likewise.
- (xtensa_fix_target_frags, xtensa_mark_narrow_branches): Likewise.
- (xtensa_mark_zcl_first_insns, xtensa_fix_a0_b_retw_frags): Likewise.
- (xtensa_fix_b_j_loop_end_frags): Likewise.
- (xtensa_fix_close_loop_end_frags): Likewise.
- (xtensa_fix_short_loop_frags, xtensa_sanity_check): Likewise.
- (retrieve_segment_info): Delete frch_seg initialisation.
-
-2006-05-03 Alan Modra <amodra@bigpond.net.au>
-
- * subsegs.c (subseg_get): Don't call obj_sec_set_private_data.
- * config/obj-elf.h (obj_sec_set_private_data): Delete.
- * config/tc-hppa.c (tc_gen_reloc): Don't use bfd_abs_symbol.
- * config/tc-mn10300.c (tc_gen_reloc): Likewise.
-
-2006-05-02 Joseph Myers <joseph@codesourcery.com>
-
- * config/tc-arm.c (do_iwmmxt_wldstbh): Don't multiply offset by 4
- here.
- (md_apply_fix3): Multiply offset by 4 here for
- BFD_RELOC_ARM_CP_OFF_IMM_S2 and BFD_RELOC_ARM_T32_CP_OFF_IMM_S2.
-
-2006-05-02 H.J. Lu <hongjiu.lu@intel.com>
- Jan Beulich <jbeulich@novell.com>
-
- * config/tc-i386.c (output_invalid_buf): Change size for
- unsigned char.
- * config/tc-tic30.c (output_invalid_buf): Likewise.
-
- * config/tc-i386.c (output_invalid): Cast none-ascii char to
- unsigned char.
- * config/tc-tic30.c (output_invalid): Likewise.
-
-2006-05-02 Daniel Jacobowitz <dan@codesourcery.com>
-
- * doc/Makefile.am (AM_MAKEINFOFLAGS): New.
- (TEXI2POD): Use AM_MAKEINFOFLAGS.
- (asconfig.texi): Don't set top_srcdir.
- * doc/as.texinfo: Don't use top_srcdir.
- * aclocal.m4, Makefile.in, doc/Makefile.in: Regenerated.
-
-2006-05-02 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (output_invalid_buf): Change size to 16.
- * config/tc-tic30.c (output_invalid_buf): Likewise.
-
- * config/tc-i386.c (output_invalid): Use snprintf instead of
- sprintf.
- * config/tc-ia64.c (declare_register_set): Likewise.
- (emit_one_bundle): Likewise.
- (check_dependencies): Likewise.
- * config/tc-tic30.c (output_invalid): Likewise.
-
-2006-05-02 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (arm_optimize_expr): New function.
- * config/tc-arm.h (md_optimize_expr): Define
- (arm_optimize_expr): Add prototype.
- (TC_FORCE_RELOCATION_SUB_SAME): Define.
-
-2006-05-02 Ben Elliston <bje@au.ibm.com>
-
- * config/obj-elf.h (ELF_TARGET_SYMBOL_FIELDS): Make single bit
- field unsigned.
-
- * sb.h (sb_list_vector): Move to sb.c.
- * sb.c (free_list): Use type of sb_list_vector directly.
- (sb_build): Fix off-by-one error in assertion about `size'.
-
-2006-05-01 Ben Elliston <bje@au.ibm.com>
-
- * listing.c (listing_listing): Remove useless loop.
- * macro.c (macro_expand): Remove is_positional local variable.
- * read.c (s_comm_internal): Simplify `if' condition 1 || x -> 1
- and simplify surrounding expressions, where possible.
- (assign_symbol): Likewise.
- (s_weakref): Likewise.
- * symbols.c (colon): Likewise.
-
-2006-05-01 James Lemke <jwlemke@wasabisystems.com>
-
- * subsegs.c (subseg_set_rest): Always set seginfp->frchainP if NULL.
-
-2006-04-30 Thiemo Seufer <ths@mips.com>
- David Ung <davidu@mips.com>
-
- * config/tc-mips.c (validate_mips_insn): Handling of udi cases.
- (mips_immed): New table that records various handling of udi
- instruction patterns.
- (mips_ip): Adds udi handling.
-
-2006-04-28 Alan Modra <amodra@bigpond.net.au>
-
- * dwarf2dbg.c (get_line_subseg): Attach new struct line_seg to end
- of list rather than beginning.
-
-2006-04-26 Julian Brown <julian@codesourcery.com>
-
- * gas/config/tc-arm.c (neon_is_quarter_float): Move, and rename to...
- (is_quarter_float): Rename from above. Simplify slightly.
- (parse_qfloat_immediate): Parse a "quarter precision" floating-point
- number.
- (parse_neon_mov): Parse floating-point constants.
- (neon_qfloat_bits): Fix encoding.
- (neon_cmode_for_move_imm): Tweak to use floating-point encoding in
- preference to integer encoding when using the F32 type.
-
-2006-04-26 Julian Brown <julian@codesourcery.com>
-
- * config/tc-arm.c (neon_el_type): Make NT_invtype be the zero (so
- zero-initialising structures containing it will lead to invalid types).
- (arm_it): Add vectype to each operand.
- (NTA_HASTYPE, NTA_HASINDEX): Constants used in neon_typed_alias
- defined field.
- (neon_typed_alias): New structure. Extra information for typed
- register aliases.
- (reg_entry): Add neon type info field.
- (arm_reg_parse): Remove RTYPE argument (revert to previous arguments).
- Break out alternative syntax for coprocessor registers, etc. into...
- (arm_reg_alt_syntax): New function. Alternate syntax handling broken
- out from arm_reg_parse.
- (parse_neon_type): Move. Return SUCCESS/FAIL.
- (first_error): New function. Call to ensure first error which occurs is
- reported.
- (parse_neon_operand_type): Parse exactly one type.
- (NEON_ALL_LANES, NEON_INTERLEAVE_LANES): Move.
- (parse_typed_reg_or_scalar): New function. Handle core of both
- arm_typed_reg_parse and parse_scalar.
- (arm_typed_reg_parse): Parse a register with an optional type.
- (NEON_SCALAR_REG, NEON_SCALAR_INDEX): Extract parts of parse_scalar
- result.
- (parse_scalar): Parse a Neon scalar with optional type.
- (parse_reg_list): Use first_error.
- (parse_vfp_reg_list): Use arm_typed_reg_parse instead of arm_reg_parse.
- (neon_alias_types_same): New function. Return true if two (alias) types
- are the same.
- (parse_neon_el_struct_list): Use parse_typed_reg_or_scalar. Return type
- of elements.
- (insert_reg_alias): Return new reg_entry not void.
- (insert_neon_reg_alias): New function. Insert type/index information as
- well as register for alias.
- (create_neon_reg_alias): New function. Parse .dn/.qn directives and
- make typed register aliases accordingly.
- (s_dn, s_qn): New functions. Handle incorrectly used .dn/.qn at start
- of line.
- (s_unreq): Delete type information if present.
- (s_arm_unwind_save_mmxwr): Remove arg 3 from arm_reg_parse calls.
- (s_arm_unwind_save_mmxwcg): Likewise.
- (s_arm_unwind_movsp): Likewise.
- (s_arm_unwind_setfp): Likewise.
- (parse_shift): Likewise.
- (parse_shifter_operand): Likewise.
- (parse_address): Likewise.
- (parse_tb): Likewise.
- (tc_arm_regname_to_dw2regnum): Likewise.
- (md_pseudo_table): Add dn, qn.
- (parse_neon_mov): Handle typed operands.
- (parse_operands): Likewise.
- (neon_type_mask): Add N_SIZ.
- (N_ALLMODS): New macro.
- (neon_check_shape): Fix typo in NS_DDD_QQQ case. Use first_error.
- (el_type_of_type_chk): Add some safeguards.
- (modify_types_allowed): Fix logic bug.
- (neon_check_type): Handle operands with types.
- (neon_three_same): Remove redundant optional arg handling.
- (do_neon_dyadic_i64_su, do_neon_shl_imm, do_neon_qshl_imm)
- (do_neon_logic, do_neon_qdmulh, do_neon_fcmp_absolute)
- (do_neon_step): Adjust accordingly.
- (neon_cmode_for_logic_imm): Use first_error.
- (do_neon_bitfield): Call neon_check_type.
- (neon_dyadic): Rename to...
- (neon_dyadic_misc): ...this. New name for neon_dyadic. Add bitfield
- to allow modification of type of the destination.
- (do_neon_dyadic_if_su, do_neon_dyadic_if_i, do_neon_dyadic_if_i_d)
- (do_neon_addsub_if_i, do_neon_mul): Adjust accordingly.
- (do_neon_compare): Make destination be an untyped bitfield.
- (neon_scalar_for_mul): Use NEON_SCALAR_REG, NEON_SCALAR_INDEX.
- (neon_mul_mac): Return early in case of errors.
- (neon_move_immediate): Use first_error.
- (neon_mac_reg_scalar_long): Fix type to include scalar.
- (do_neon_dup): Likewise.
- (do_neon_mov): Likewise (in several places).
- (do_neon_tbl_tbx): Fix type.
- (do_neon_ld_st_interleave, neon_alignment_bit, do_neon_ld_st_lane)
- (do_neon_ld_dup): Exit early in case of errors and/or use
- first_error.
- (opcode_lookup): Update for parse_neon_type returning SUCCESS/FAIL.
- Handle .dn/.qn directives.
- (REGDEF): Add zero for reg_entry neon field.
-
-2006-04-26 Julian Brown <julian@codesourcery.com>
-
- * config/tc-arm.c (limits.h): Include.
- (fpu_arch_vfp_v3, fpu_vfp_ext_v3, fpu_neon_ext_v1)
- (fpu_vfp_v3_or_neon_ext): Declare constants.
- (neon_el_type): New enumeration of types for Neon vector elements.
- (neon_type_el): New struct. Define type and size of a vector element.
- (NEON_MAX_TYPE_ELS): Define constant. The maximum number of types per
- instruction.
- (neon_type): Define struct. The type of an instruction.
- (arm_it): Add 'vectype' for the current instruction.
- (isscalar, immisalign, regisimm, isquad): New predicates for operands.
- (vfp_sp_reg_pos): Rename to...
- (vfp_reg_pos): ...this, and add VFP_REG_Dd, VFP_REG_Dm, VFP_REG_Dn
- tags.
- (arm_reg_type): Add REG_TYPE_NQ (Neon Q register) and REG_TYPE_NDQ
- (Neon D or Q register).
- (reg_expected_msgs): Sync with above. Allow VFD to mean VFP or Neon D
- register.
- (GE_OPT_PREFIX_BIG): Define constant, for use in...
- (my_get_expression): Allow above constant as argument to accept
- 64-bit constants with optional prefix.
- (arm_reg_parse): Add extra argument to return the specific type of
- register in when either a D or Q register (REG_TYPE_NDQ) is
- requested. Can be NULL.
- (parse_scalar): New function. Parse Neon scalar (vector reg and index).
- (parse_reg_list): Update for new arm_reg_parse args.
- (parse_vfp_reg_list): Allow parsing of Neon D/Q register lists.
- (parse_neon_el_struct_list): New function. Parse element/structure
- register lists for VLD<n>/VST<n> instructions.
- (s_arm_unwind_save_vfp): Update for new parse_vfp_reg_list args.
- (s_arm_unwind_save_mmxwr): Likewise.
- (s_arm_unwind_save_mmxwcg): Likewise.
- (s_arm_unwind_movsp): Likewise.
- (s_arm_unwind_setfp): Likewise.
- (parse_big_immediate): New function. Parse an immediate, which may be
- 64 bits wide. Put results in inst.operands[i].
- (parse_shift): Update for new arm_reg_parse args.
- (parse_address): Likewise. Add parsing of alignment specifiers.
- (parse_neon_mov): Parse the operands of a VMOV instruction.
- (operand_parse_code): Add OP_RND, OP_RNQ, OP_RNDQ, OP_RNSC, OP_NRDLST,
- OP_NSTRLST, OP_NILO, OP_RNDQ_I0, OP_RR_RNSC, OP_RNDQ_RNSC, OP_RND_RNSC,
- OP_VMOV, OP_RNDQ_IMVNb, OP_RNDQ_I63b, OP_I0, OP_I16z, OP_I32z, OP_I64,
- OP_I64z, OP_oI32b, OP_oRND, OP_oRNQ, OP_oRNDQ.
- (parse_operands): Handle new codes above.
- (encode_arm_vfp_sp_reg): Rename to...
- (encode_arm_vfp_reg): ...this. Handle D regs (0-31) too. Complain if
- selected VFP version only supports D0-D15.
- (do_vfp_sp_monadic, do_vfp_sp_dyadic, do_vfp_sp_compare_z)
- (do_vfp_dp_sp_cvt, do_vfp_reg_from_sp, do_vfp_reg2_from_sp2)
- (do_vfp_sp_from_reg, do_vfp_sp2_from_reg2, do_vfp_sp_ldst)
- (do_vfp_dp_ldst, vfp_sp_ldstm, vfp_dp_ldstm): Update for new
- encode_arm_vfp_reg name, and allow 32 D regs.
- (do_vfp_dp_rd_rm, do_vfp_dp_rn_rd, do_vfp_dp_rd_rn, do_vfp_dp_rd_rn_rm)
- (do_vfp_rm_rd_rn): New functions to encode VFP insns allowing 32 D
- regs.
- (do_vfp_sp_const, do_vfp_dp_const, vfp_conv, do_vfp_sp_conv_16)
- (do_vfp_dp_conv_16, do_vfp_sp_conv_32, do_vfp_dp_conv_32): Handle
- constant-load and conversion insns introduced with VFPv3.
- (neon_tab_entry): New struct.
- (NEON_ENC_TAB): Bit patterns for overloaded Neon instructions, and
- those which are the targets of pseudo-instructions.
- (neon_opc): Enumerate opcodes, use as indices into...
- (neon_enc_tab): ...this. Hold data from NEON_ENC_TAB.
- (NEON_ENC_INTEGER, NEON_ENC_ARMREG, NEON_ENC_POLY, NEON_ENC_FLOAT)
- (NEON_ENC_SCALAR, NEON_ENC_IMMED, NEON_ENC_INTERLV, NEON_ENC_LANE)
- (NEON_ENC_DUP): Define meaningful helper macros to look up values in
- neon_enc_tab.
- (neon_shape): Enumerate shapes (permitted register widths, etc.) for
- Neon instructions.
- (neon_type_mask): New. Compact type representation for type checking.
- (N_SU_ALL, N_SU_32, N_SU_16_64, N_SUF_32, N_I_ALL, N_IF_32): Common
- permitted type combinations.
- (N_IGNORE_TYPE): New macro.
- (neon_check_shape): New function. Check an instruction shape for
- multiple alternatives. Return the specific shape for the current
- instruction.
- (neon_modify_type_size): New function. Modify a vector type and size,
- depending on the bit mask in argument 1.
- (neon_type_promote): New function. Convert a given "key" type (of an
- operand) into the correct type for a different operand, based on a bit
- mask.
- (type_chk_of_el_type): New function. Convert a type and size into the
- compact representation used for type checking.
- (el_type_of_type_ckh): New function. Reverse of above (only when a
- single bit is set in the bit mask).
- (modify_types_allowed): New function. Alter a mask of allowed types
- based on a bit mask of modifications.
- (neon_check_type): New function. Check the type of the current
- instruction against the variable argument list. The "key" type of the
- instruction is returned.
- (neon_dp_fixup): New function. Fill in and modify instruction bits for
- a Neon data-processing instruction depending on whether we're in ARM
- mode or Thumb-2 mode.
- (neon_logbits): New function.
- (neon_three_same, neon_two_same, do_neon_dyadic_i_su)
- (do_neon_dyadic_i64_su, neon_imm_shift, do_neon_shl_imm)
- (do_neon_qshl_imm, neon_cmode_for_logic_imm, neon_bits_same_in_bytes)
- (neon_squash_bits, neon_is_quarter_float, neon_qfloat_bits)
- (neon_cmode_for_move_imm, neon_write_immbits, neon_invert_size)
- (do_neon_logic, do_neon_bitfield, neon_dyadic, do_neon_dyadic_if_su)
- (do_neon_dyadic_if_su_d, do_neon_dyadic_if_i, do_neon_dyadic_if_i_d)
- (do_neon_addsub_if_i, neon_exchange_operands, neon_compare)
- (do_neon_cmp, do_neon_cmp_inv, do_neon_ceq, neon_scalar_for_mul)
- (neon_mul_mac, do_neon_mac_maybe_scalar, do_neon_tst, do_neon_mul)
- (do_neon_qdmulh, do_neon_fcmp_absolute, do_neon_fcmp_absolute_inv)
- (do_neon_step, do_neon_abs_neg, do_neon_sli, do_neon_sri)
- (do_neon_qshlu_imm, do_neon_qmovn, do_neon_qmovun)
- (do_neon_rshift_sat_narrow, do_neon_rshift_sat_narrow_u, do_neon_movn)
- (do_neon_rshift_narrow, do_neon_shll, neon_cvt_flavour, do_neon_cvt)
- (neon_move_immediate, do_neon_mvn, neon_mixed_length)
- (do_neon_dyadic_long, do_neon_abal, neon_mac_reg_scalar_long)
- (do_neon_mac_maybe_scalar_long, do_neon_dyadic_wide, do_neon_vmull)
- (do_neon_ext, do_neon_rev, do_neon_dup, do_neon_mov)
- (do_neon_rshift_round_imm, do_neon_movl, do_neon_trn, do_neon_zip_uzp)
- (do_neon_sat_abs_neg, do_neon_pair_long, do_neon_recip_est)
- (do_neon_cls, do_neon_clz, do_neon_cnt, do_neon_swp, do_neon_tbl_tbx)
- (do_neon_ldm_stm, do_neon_ldr_str, do_neon_ld_st_interleave)
- (neon_alignment_bit, do_neon_ld_st_lane, do_neon_ld_dup)
- (do_neon_ldx_stx): New functions. Neon bit encoding and encoding
- helpers.
- (parse_neon_type): New function. Parse Neon type specifier.
- (opcode_lookup): Allow parsing of Neon type specifiers.
- (REGNUM2, REGSETH, REGSET2): New macros.
- (reg_names): Add new VFPv3 and Neon registers.
- (NUF, nUF, NCE, nCE): New macros for opcode table.
- (insns): More VFP registers allowed in fcpyd, fmdhr, fmdlr, fmrdh,
- fmrdl, fabsd, fnegd, fsqrtd, faddd, fsubd, fmuld, fdivd, fmacd, fmscd,
- fnmuld, fnmacd, fnmscd, fcmpd, fcmpzd, fcmped, fcmpezd, fmdrr, fmrrd.
- Add Neon instructions vaba, vhadd, vrhadd, vhsub, vqadd, vqsub, vrshl,
- vqrshl, vshl, vqshl{u}, vand, vbic, vorr, vorn, veor, vbsl, vbit, vbif,
- vabd, vmax, vmin, vcge, vcgt, vclt, vcle, vceq, vpmax, vpmin, vmla,
- vmls, vpadd, vadd, vsub, vtst, vmul, vqdmulh, vqrdmulh, vacge, vacgt,
- vaclt, vacle, vrecps, vrsqrts, vabs, vneg, v{r}shr, v{r}sra, vsli,
- vsri, vqshrn, vq{r}shr{u}n, v{r}shrn, vshll, vcvt, vmov, vmvn, vabal,
- vabdl, vaddl, vsubl, vmlal, vmlsl, vaddw, vsubw, v{r}addhn, v{r}subhn,
- vqdmlal, vqdmlsl, vqdmull, vmull, vext, vrev64, vrev32, vrev16, vdup,
- vmovl, v{q}movn, vzip, vuzp, vqabs, vqneg, vpadal, vpaddl, vrecpe,
- vrsqrte, vcls, vclz, vcnt, vswp, vtrn, vtbl, vtbx, vldm, vstm, vldr,
- vstr, vld[1234], vst[1234], fconst[sd], f[us][lh]to[sd],
- fto[us][lh][sd].
- (tc_arm_regname_to_dw2regnum): Update for arm_reg_parse args.
- (arm_cpu_option_table): Add Neon and VFPv3 to Cortex-A8.
- (arm_option_cpu_value): Add vfp3 and neon.
- (aeabi_set_public_attributes): Support VFPv3 and NEON attributes. Fix
- VFPv1 attribute.
-
-2006-04-25 Bob Wilson <bob.wilson@acm.org>
-
- * config/xtensa-relax.c (widen_spec_list): Use new "WIDE.<opcode>"
- syntax instead of hardcoded opcodes with ".w18" suffixes.
- (wide_branch_opcode): New.
- (build_transition): Use it to check for wide branch opcodes with
- either ".w18" or ".w15" suffixes.
-
-2006-04-25 Bob Wilson <bob.wilson@acm.org>
-
- * config/tc-xtensa.c (xtensa_create_literal_symbol,
- xg_assemble_literal, xg_assemble_literal_space): Do not set the
- frag's is_literal flag.
-
-2006-04-25 Bob Wilson <bob.wilson@acm.org>
-
- * config/xtensa-relax.c (XCHAL_HAVE_WIDE_BRANCHES): Provide default.
-
-2006-04-23 Kazu Hirata <kazu@codesourcery.com>
-
- * config/obj-coff.c, config/tc-arm.c, config/tc-bfin.c,
- config/tc-cris.c, config/tc-crx.c, config/tc-i386.c,
- config/tc-ia64.c, config/tc-maxq.c, config/tc-maxq.h,
- config/tc-mips.c, config/tc-msp430.c, config/tc-sh.c,
- config/tc-tic4x.c, config/tc-xtensa.c: Fix comment typos.
-
-2005-04-20 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (s_arm_arch, s_arm_cpu, s_arm_fpu): Enable for
- all targets.
- (md_pseudo_table): Enable .arch, .cpu and .fpu for all targets.
-
-2006-04-19 Alan Modra <amodra@bigpond.net.au>
-
- * Makefile.am (CPU_TYPES): Add maxq and mt. Sort.
- (CPU_OBJ_VALID): Change sense of COFF test to default to invalid.
- Make some cpus unsupported on ELF. Run "make dep-am".
- * Makefile.in: Regenerate.
-
-2006-04-19 Alan Modra <amodra@bigpond.net.au>
-
- * configure.in (--enable-targets): Indent help message.
- * configure: Regenerate.
-
-2006-04-18 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/2533
- * config/tc-i386.c (i386_immediate): Check illegal immediate
- register operand.
-
-2006-04-18 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-i386.c: Formatting.
- (output_disp, output_imm): ISO C90 params.
-
- * frags.c (frag_offset_fixed_p): Constify args.
- * frags.h (frag_offset_fixed_p): Ditto.
-
- * config/tc-dlx.h (tc_coff_symbol_emit_hook): Delete.
- (COFF_MAGIC): Delete.
-
- * config/tc-xc16x.h (TC_LINKRELAX_FIXUP): Delete.
+ * config/tc-msp430.c (line_separator_char): Change to '{'.
-2006-04-16 Daniel Jacobowitz <dan@codesourcery.com>
+2007-02-27 Alan Modra <amodra@bigpond.net.au>
- * po/POTFILES.in: Regenerated.
+ * config/tc-m68hc11.c (fixup24): Correct fixup size.
+ (build_jump_insn): Likewise.
+ (build_insn): Likewise.
+ (s_m68hc11_relax): Likewise.
-2006-04-16 Mark Mitchell <mark@codesourcery.com>
+2007-02-27 Alan Modra <amodra@bigpond.net.au>
- * doc/as.texinfo: Mention that some .type syntaxes are not
- supported on all architectures.
+ * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
-2006-04-14 Sterling Augustine <sterling@tensilica.com>
+2007-02-25 Mark Shinwell <shinwell@codesourcery.com>
- * config/tc-xtensa.c (emit_single_op): Do not relax MOVI
- instructions when such transformations have been disabled.
+ * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
-2006-04-10 Sterling Augustine <sterling@tensilica.com>
+2007-02-23 Alan Modra <amodra@bigpond.net.au>
- * config/tc-xtensa.c (xg_assemble_vliw_tokens): Record loop target
- symbols in RELAX[_CHECK]_ALIGN_NEXT_OPCODE frags.
- (xtensa_fix_close_loop_end_frags): Use the recorded values instead of
- decoding the loop instructions. Remove current_offset variable.
- (xtensa_fix_short_loop_frags): Likewise.
- (min_bytes_to_other_loop_end): Remove current_offset argument.
+ * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
+ (md_assemble): Likewise.
-2006-04-09 Arnold Metselaar <arnold.metselaar@planet.nl>
+2007-02-22 Alan Modra <amodra@bigpond.net.au>
- * config/tc-z80.c (z80_optimize_expr): Removed.
- * config/tc-z80.h (z80_optimize_expr, md_optimize_expr): Removed.
+ * write.c (size_seg): Always clear SEC_RELOC here.
+ (install_reloc): New function, extracted from..
+ (write_relocs): ..here. Combine RELOC_EXPANSION_POSSIBLE code
+ with !RELOC_EXPANSION_POSSIBLE code. Don't add fr_offset when
+ testing frag size. Set SEC_RELOC here.
-2006-04-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
+2007-02-21 Alan Modra <amodra@bigpond.net.au>
- * gas/config/tc-avr.c (mcu_types): Add support for attiny261,
- attiny461, attiny861, attiny25, attiny45, attiny85,attiny24,
- attiny44, attiny84, at90pwm2, at90pwm3, atmega164, atmega324,
- atmega644, atmega329, atmega3290, atmega649, atmega6490,
- atmega406, atmega640, atmega1280, atmega1281, at90can32,
- at90can64, at90usb646, at90usb647, at90usb1286 and
- at90usb1287.
- Move atmega48 and atmega88 from AVR_ISA_M8 to AVR_ISA_PWMx.
+ PR 4082
+ * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
-2006-04-07 Paul Brook <paul@codesourcery.com>
+2007-02-20 Thiemo Seufer <ths@mips.com>
- * config/tc-arm.c (parse_operands): Set default error message.
+ * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
-2006-04-07 Paul Brook <paul@codesourcery.com>
+2007-02-20 Thiemo Seufer <ths@mips.com>
- * config/tc-arm.c (parse_tb): Set inst.error before returning FAIL.
+ * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
-2006-04-07 Paul Brook <paul@codesourcery.com>
+2007-02-20 Thiemo Seufer <ths@mips.com>
+ Chao-Ying Fu <fu@mips.com>
- * config/tc-arm.c (md_apply_fix): Set H bit on blx instruction.
+ * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
+ ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
+ (macro_build): Add case '2'.
+ (macro): Expand M_BALIGN to nop, packrl.ph or balign.
+ (validate_mips_insn): Add support for balign instruction.
+ (mips_ip): Handle DSP R2 instructions. Support balign instruction.
+ (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
+ md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
+ command line options.
+ (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
+ (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
+ * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
+ .set dspr2, .set nodspr2.
-2006-04-07 Paul Brook <paul@codesourcery.com>
+2007-02-20 Nathan Sidwell <nathan@codesourcery.com>
- * config/tc-arm.c (THUMB2_LOAD_BIT): Define.
- (move_or_literal_pool): Handle Thumb-2 instructions.
- (do_t_ldst): Call move_or_literal_pool for =N addressing modes.
+ * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
+ (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
-2006-04-07 Alan Modra <amodra@bigpond.net.au>
+2007-02-18 Alan Modra <amodra@bigpond.net.au>
- PR 2512.
- * config/tc-i386.c (match_template): Move 64-bit operand tests
- inside loop.
+ * write.c (TC_FX_SIZE_SLACK): Define.
+ (write_relocs): Reinstate check for fixup within frag.
+ * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
+ * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
+ * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
+ * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
+ * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
-2006-04-06 Carlos O'Donell <carlos@codesourcery.com>
+2007-02-17 Mark Mitchell <mark@codesourcery.com>
+ Nathan Sidwell <nathan@codesourcery.com>
+ Vladimir Prus <vladimir@codesourcery.com
+ Joseph Myers <joseph@codesourcery.com>
- * po/Make-in: Add install-html target.
- * Makefile.am: Add install-html and install-html-recursive targets.
- * Makefile.in: Regenerate.
- * configure.in: AC_SUBST datarootdir, docdir, htmldir.
+ * configure.in (--with-bugurl): New option.
* configure: Regenerate.
- * doc/Makefile.am: Add install-html and install-html-am targets.
+ * dep-in.sed: Remove bin-bugs.h.
+ * Makefile.am (REPORT_BUGS_TO): Define.
+ (INCLUDES): Define REPORT_BUGS_TO.
+ (DEP_INCLUDES): Likewise.
+ ($(OBJS)): No longer depend on bin-bugs.h.
+ * Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
+ * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
+ * as.h: Remove include of bin-bugs.h.
-2006-04-06 Alan Modra <amodra@bigpond.net.au>
+2007-02-17 Alan Modra <amodra@bigpond.net.au>
- * frags.c (frag_offset_fixed_p): Reinitialise offset before
- second scan.
+ * write.c: White space fixes.
+ (fixup_segment): Move symbol_mri_common_p adjustments..
+ (write_relocs): ..and symbol_equated_reloc_p adjustments..
+ (adjust_reloc_syms): ..to here.
-2006-04-05 Richard Sandiford <richard@codesourcery.com>
- Daniel Jacobowitz <dan@codesourcery.com>
+2007-02-16 Alan Modra <amodra@bigpond.net.au>
- * config/tc-sparc.c (sparc_target_format): Handle TE_VXWORKS.
- (GOTT_BASE, GOTT_INDEX): New.
- (tc_gen_reloc): Don't alter relocations against GOTT_BASE and
- GOTT_INDEX when generating VxWorks PIC.
- * configure.tgt (sparc*-*-vxworks*): Remove this special case;
- use the generic *-*-vxworks* stanza instead.
+ * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
+ xmalloc, memset. Don't bother assigning NULL to known zero mem.
+ (subseg_set_rest): Remove unnecessary cast.
+ * write.c: Include libbfd.h. Replace PTR with void * throughout.
+ Remove unnecessary forward declarations and casts.
+ (set_symtab): Delete extern bfd_alloc.
+ (fixup_segment): Move.
-2006-04-04 Alan Modra <amodra@bigpond.net.au>
+2007-02-15 Nathan Sidwell <nathan@codesourcery.com>
- PR 997
- * frags.c (frag_offset_fixed_p): New function.
- * frags.h (frag_offset_fixed_p): Declare.
- * expr.c (expr): Use frag_offset_fixed_p when simplifying subtraction.
- (resolve_expression): Likewise.
+ * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
+ * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
+ (mcf5475_ctrl, mcf5485_ctrl): New.
+ (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
+ (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
+ (init_table): Add asid, mmubar, adjust rombar0.
-2006-04-03 Sterling Augustine <sterling@tensilica.com>
+2007-02-14 Alan Modra <amodra@bigpond.net.au>
- * config/tc-xtensa.c (init_op_placement_info_table): Check for formats
- of the same length but different numbers of slots.
+ * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
+ * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
+ (process_operands): Move old Seg2ShortForm and Seg3ShortForm
+ code, and test for these insns using a combination of
+ opcode_modifier and operand_types.
-2006-03-30 Andreas Schwab <schwab@suse.de>
+2007-02-07 Paul Brook <paul@codesourcery.com>
- * configure.in: Fix help string for --enable-targets option.
- * configure: Regenerate.
+ * configure.tgt: Add arm*-*-uclinux-*eabi.
-2006-03-28 Nathan Sidwell <nathan@codesourcery.com>
-
- * gas/config/tc-m68k.c (find_cf_chip): Merge into ...
- (m68k_ip): ... here. Use for all chips. Protect against buffer
- overrun and avoid excessive copying.
-
- * config/tc-m68k.c (m68000_control_regs, m68010_control_regs,
- m68020_control_regs, m68040_control_regs, m68060_control_regs,
- mcf_control_regs, mcf5208_control_regs, mcf5213_control_regs,
- mcf5329_control_regs, mcf5249_control_regs, mcf528x_control_regs,
- mcfv4e_control_regs, m68010_control_regs): Rename and reorder to ...
- (m68000_ctrl, m68010_ctrl, m68020_ctrl, m68040_ctrl, m68060_ctrl,
- mcf_ctrl, mcf5208_ctrl, mcf5213_ctrl, mcf5235_ctrl, mcf5249_ctrl,
- mcf5216_ctrl, mcf5250_ctrl, mcf5271_ctrl, mcf5272_ctrl,
- mcf5282_ctrl, mcfv4e_ctrl): ... these.
- (mcf5275_ctrl, mcf5329_ctrl, mcf5373_ctrl): New.
- (struct m68k_cpu): Change chip field to control_regs.
- (current_chip): Remove.
- (control_regs): New.
- (m68k_archs, m68k_extensions): Adjust.
- (m68k_cpus): Reorder to be in cpu number order. Adjust.
- (CPU_ALLOW_MC, CPU_ALLOW_NEGATION): Remove.
- (find_cf_chip): Reimplement for new organization of cpu table.
- (select_control_regs): Remove.
- (mri_chip): Adjust.
- (struct save_opts): Save control regs, not chip.
- (s_save, s_restore): Adjust.
- (m68k_lookup_cpu): Give deprecated warning when necessary.
- (m68k_init_arch): Adjust.
- (md_show_usage): Adjust for new cpu table organization.
-
-2006-03-25 Bernd Schmidt <bernd.schmidt@analog.com>
-
- * config/bfin-defs.h (Expr_Node_Type enum): Add Expr_Node_GOT_Reloc.
- * config/bfin-lex.l: Recognize GOT17M4 and FUNCDESC_GOT17M4.
- * config/bfin-parse.y: Include "libbfd.h", "elf/common.h" and
- "elf/bfin.h".
- (GOT17M4, FUNCDESC_GOT17M4): New tokens of type <value>.
- (any_gotrel): New rule.
- (got): Use it, and create Expr_Node_GOT_Reloc nodes.
- * config/tc-bfin.c: Include "libbfd.h", "elf/common.h" and
- "elf/bfin.h".
- (DEFAULT_FLAGS, bfin_flags, bfin_pic_flag): New.
- (bfin_pic_ptr): New function.
- (md_pseudo_table): Add it for ".picptr".
- (OPTION_FDPIC): New macro.
- (md_longopts): Add -mfdpic.
- (md_parse_option): Handle it.
- (md_begin): Set BFD flags.
- (md_apply_fix3, bfin_fix_adjustable): Handle new relocs.
- (bfin_gen_ldstidxi): Adjust to match the trees that the parser gives
- us for GOT relocs.
- * Makefile.am (bfin-parse.o): Update dependencies.
- (DEPTC_bfin_elf): Likewise.
+2007-02-05 Dave Brolley <brolley@redhat.com>
+ Richard Sandiford <rsandifo@redhat.com>
+ DJ Delorie <dj@redhat.com>
+ Stan Cox <scox@redhat.com>
+ Jim Blandy <jimb@redhat.com>
+ Nick Clifton <nickc@redhat.com>
+ Jim Wilson <wilson@redhat.com>
+ Frank Ch. Eigler <fche@redhat.com>
+ Graydon Hoare <graydon@redhat.com>
+ Ben Elliston <bje@redhat.com>
+ John Healy <jhealy@redhat.com>
+ Richard Henderson <rth@redhat.com>
+
+ * Makefile.am (CPU_TYPES): Add mep.
+ (TARGET_CPU_CFILES): Add tc-mep.c.
+ (TARGET_CPU_HFILES): Add tc-mep.h.
+ (DEPTC_mep_elf): New variable.
+ (DEPTC_mep_coff): Likewise.
+ (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
+ * configure.in: Support mep.
+ * configure.tgt: Likewise.
+ * config/tc-mep.c: New file.
+ * config/obj-elf.c: New file.
+ * config/tc-mep.c: New file.
+ * config/tc-mep.h: New file.
+ * testsuite/gas/mep: New testsuite with content.
* Makefile.in: Regenerate.
+ * configure: Regenerate.
-2006-03-25 Richard Sandiford <richard@codesourcery.com>
-
- * config/tc-m68k.c (m68k_cpus): Change cpu_cf5208 entries to use
- mcfemac instead of mcfmac.
-
-2006-03-23 Michael Matz <matz@suse.de>
-
- * config/tc-i386.c (type_names): Correct placement of 'static'.
- (reloc): Map some more relocs to their 64 bit counterpart when
- size is 8.
- (output_insn): Work around breakage if DEBUG386 is defined.
- (output_disp): A BFD_RELOC_64 with GOT_symbol as operand also
- needs to be mapped to BFD_RELOC_X86_64_GOTPC64 or
- BFD_RELOC_X86_64_GOTPC32. Also x86-64 handles pcrel addressing
- different from i386.
- (output_imm): Ditto.
- (lex_got): Recognize @PLTOFF and @GOTPLT. Make @GOT accept also
- Imm64.
- (md_convert_frag): Jumps can now be larger than 2GB away, error
- out in that case.
- (tc_gen_reloc): New relocs are passed through. BFD_RELOC_64
- and BFD_RELOC_64_PCREL are mapped to BFD_RELOC_X86_64_GOTPC64.
-
-2006-03-22 Richard Sandiford <richard@codesourcery.com>
- Daniel Jacobowitz <dan@codesourcery.com>
- Phil Edwards <phil@codesourcery.com>
- Zack Weinberg <zack@codesourcery.com>
- Mark Mitchell <mark@codesourcery.com>
- Nathan Sidwell <nathan@codesourcery.com>
-
- * config/tc-mips.c (mips_target_format): Handle vxworks targets.
- (md_begin): Complain about -G being used for PIC. Don't change
- the text, data and bss alignments on VxWorks.
- (reloc_needs_lo_p): Don't return true for R_MIPS_GOT16 when
- generating VxWorks PIC.
- (load_address): Extend SVR4_PIC handling to VXWORKS_PIC.
- (macro): Likewise, but do not treat la $25 specially for
- VxWorks PIC, and do not handle jal.
- (OPTION_MVXWORKS_PIC): New macro.
- (md_longopts): Add -mvxworks-pic.
- (md_parse_option): Don't complain about using PIC and -G together here.
- Handle OPTION_MVXWORKS_PIC.
- (md_estimate_size_before_relax): Always use the first relaxation
- sequence on VxWorks.
- * config/tc-mips.h (VXWORKS_PIC): New.
-
-2006-03-21 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (md_apply_fix): Fix typo in offset mask.
-
-2006-03-21 Sterling Augustine <sterling@tensilica.com>
-
- * config/tc-xtensa.c (enforce_three_byte_loop_align): New flag.
- (xtensa_setup_hw_workarounds): Set this new flag for older hardware.
- (get_loop_align_size): New.
- (xtensa_end): Skip xtensa_mark_narrow_branches when not aligning.
- (xtensa_mark_zcl_first_insns): Prevent widening of first loop frag.
- (get_text_align_power): Rewrite to handle inputs in the range 2-8.
- (get_noop_aligned_address): Use get_loop_align_size.
- (get_aligned_diff): Likewise.
-
-2006-03-21 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (insns): Correct opcodes for ldrbt and strbt.
-
-2006-03-20 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (BAD_BRANCH, BAD_NOT_IT): Define.
- (do_t_branch): Encode branches inside IT blocks as unconditional.
- (do_t_cps): New function.
- (do_t_blx, do_t_bkpt, do_t_branch23, do_t_bx, do_t_bxj, do_t_cpsi,
- do_t_czb, do_t_it, do_t_setend, do_t_tb): Add IT constaints.
- (opcode_lookup): Allow conditional suffixes on all instructions in
- Thumb mode.
- (md_assemble): Advance condexec state before checking for errors.
- (insns): Use do_t_cps.
-
-2006-03-20 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (output_relax_insn): Call dwarf2_emit_insn before
- outputting the insn.
-
-2006-03-18 Jan-Benedict Glaw <jbglaw@lug-owl.de>
-
- * config/tc-vax.c: Update copyright year.
- * config/tc-vax.h: Likewise.
-
-2006-03-18 Jan-Benedict Glaw <jbglaw@lug-owl.de>
-
- * config/tc-vax.c (md_chars_to_number): Used only locally, so
- make it static.
- * config/tc-vax.h (md_chars_to_number): Remove obsolete declaration.
-
-2006-03-17 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (insns): Add ldm and stm.
-
-2006-03-17 Ben Elliston <bje@au.ibm.com>
-
- PR gas/2446
- * doc/as.texinfo (Ident): Document this directive more thoroughly.
-
-2006-03-16 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (insns): Add "svc".
+2007-02-05 Dave Brolley <brolley@redhat.com>
+
+ * cgen.c (gas_cgen_install_complex_reloc): Removed.
+ (complex_reloc_installation_howto): Removed.
+
+2007-02-05 Dave Brolley <brolley@redhat.com>
+ Graydon Hoare <graydon@redhat.com>
+ DJ Delorie <dj@redhat.com>
+ Catherine Moore <clm@redhat.com>
+ Michael Chastain <chastain@redhat.com>
+ Frank Ch. Eigler <fche@redhat.com>
+
+ * symbols.c (use_complex_relocs_for): New, to decide
+ when to use complex relocs. Add signed RELC support.
+ (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
+ encode expression symbols as mangled complex relocation symbols (when
+ compiled with -DOBJ_COMPLEX_RELOC).
+ (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
+ * cgen.c (gas_cgen_md_apply_fix3): Only set signed_p if RELC. Call
+ encode_addend with new args. Modify to get start, length from
+ ifield whenever it is set. Also change condition on which
+ self-describing relocs are encoded. Add hook into
+ gas_cgen_encode_addend.
+ (queue_fixup_recursively): Add signed RELC support. Change from masked
+ expr to trunc flag. Restore assignment of sub-field value to
+ temporary in fixups array. Reflect changed meaning of last arg to
+ queue_fixup_recursively.
+ (fixup): Add cgen_maybe_multi_ifield member.
+ (make_right_shifted_expr): New function.
+ (queue_fixup): Change to recursive function that fragments
+ fixups if operand has a multi-ifield.
+ (gas_cgen_parse_operand): Add RELC code to wrap expressions in
+ symbols, call weak_operand_overflow_check, and fragment call
+ queue_fixup with operand fields.
+ (gas_cgen_finish_insn) Modify to manage ifield pointer.
+ (weak_operand_overflow_check): New function to try to select
+ insns correctly.
+ (gas_cgen_encode_addend): New function for relc.
+ (gas_cgen_install_complex_reloc): Likewise.
+ (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
+ * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
+ cgen_maybe_multi_ifield field to fx_cgen substructure.
+ * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
+ * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
+
+2007-02-03 DJ Delorie <dj@delorie.com>
+
+ * config/tc-m32c.c (m32c_cons_fix_new): New. Added to support 3
+ byte relocs.
+ * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
+ (m32c_cons_fix_new): Prototype.
+
+2007-02-02 Bob Wilson <bob.wilson@acm.org>
+
+ * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
+ (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
+
+2007-02-02 Bob Wilson <bob.wilson@acm.org>
+
+ * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
+ (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
+ (map_suffix_reloc_to_operator): New.
+ (map_operator_to_reloc): New.
+ (expression_maybe_register): Fix incorrect test of return value from
+ xtensa_elf_suffix. Rearrange to use map_suffix_reloc_to_operator.
+ (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
+
+2007-02-02 Bob Wilson <bob.wilson@acm.org>
+
+ * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
+ (tinsn_get_tok): Delete prototype.
+ * config/tc-xtensa.c (tinsn_get_tok): Delete.
+
+2007-02-02 Bob Wilson <bob.wilson@acm.org>
+
+ * config/xtensa-relax.h (struct build_instr): Delete id field.
+ * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
+ and LABEL tokens.
+ (append_literal_op, append_label_op): Remove litnum/labnum arguments;
+ set op_data fields to zero.
+ (parse_id_constant): Delete.
+ (build_transition): Remove code to handle numbered literals and labels.
+
+2007-02-02 Bob Wilson <bob.wilson@acm.org>
+
+ * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
+ (build_transition_table): Likewise.
+
+2007-02-01 Bob Wilson <bob.wilson@acm.org>
+
+ * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
+ fx_tcbit.
+ * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
+
+2007-02-02 Alan Modra <amodra@bigpond.net.au>
+
+ * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
+ (struct fix <fx_plt>): Rename to tcbit2.
+ * write.c (fix_new_internal): Adjust.
+ (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
+ * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
+ * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
+ * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
+ * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
+ * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
+ * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
+ * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
+ * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
+ * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
+ * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
+ Instead, compare fx_r_type.
+ * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
+ fx_tcbit in place of fx_plt.
+ * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
+ * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
+ to fx_plt.
+
+2007-01-30 Nick Clifton <nickc@redhat.com>
+
+ * as.c (main): Mark symbols created via the --defsym command line
+ option as volatile so that they can be overridden later on by a
+ .set directive. This maintains compatibility with the behaviour
+ of earlier versions of the assembler.
+ * doc/as.texinfo (--defsym): Document that the defined symbol's
+ value can be overridden via a .set directive.
+
+2007-01-28 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/tc-i386.c (swap_imm_operands): Renamed to ...
+ (swap_2_operands): This. Take 2 ints.
+ (md_assemble): Updated.
+ (swap_operands): Call swap_2_operands to swap 2 operands.
+
+2007-01-24 DJ Delorie <dj@redhat.com>
+
+ * config/tc-m32c.c (md_pseudo_table): Add .3byte.
-2006-03-13 Bob Wilson <bob.wilson@acm.org>
+2007-01-22 Nick Clifton <nickc@redhat.com>
- * config/tc-xtensa.c (xg_translate_sysreg_op): Remove has_underbar
- flag and avoid double underscore prefixes.
+ PR gas/3871
+ * tc-score.c: Remove unnecessary uses of _().
+ Make the err_msg[] a file level local array in order to save
+ storage space.
+ Remove unnecessary sprintf()s.
-2006-03-10 Paul Brook <paul@codesourcery.com>
+2007-01-18 Mei Ligang <ligang@sunnorth.com.cn>
- * config/tc-arm.c (md_begin): Handle EABIv5.
- (arm_eabis): Add EF_ARM_EABI_VER5.
- * doc/c-arm.texi: Document -meabi=5.
+ PR gas/3871
+ * config/tc-score.c : Using _() for const string.
+ Do not assign inst.error with a local string pointer.
+ (md_section_align): Pad section.
+
+2007-01-13 H.J. Lu <hongjiu.lu@intel.com>
-2006-03-10 Ben Elliston <bje@au.ibm.com>
+ * config/tc-i386.c (build_modrm_byte): Check number of operands
+ when procssing memory/register operand.
- * app.c (do_scrub_chars): Simplify string handling.
+2007-01-12 Nick Clifton <nickc@redhat.com>
-2006-03-07 Richard Sandiford <richard@codesourcery.com>
- Daniel Jacobowitz <dan@codesourcery.com>
- Zack Weinberg <zack@codesourcery.com>
- Nathan Sidwell <nathan@codesourcery.com>
- Paul Brook <paul@codesourcery.com>
- Ricardo Anguiano <anguiano@codesourcery.com>
- Phil Edwards <phil@codesourcery.com>
+ PR gas/3856
+ * macro.c (expand_irp): Do not ignore spaces inside quoted
+ strings.
- * config/tc-arm.c (md_apply_fix): Install a value of zero into a
- BFD_RELOC_ARM_OFFSET_IMM field if we're going to generate a RELA
- R_ARM_ABS12 reloc.
- (tc_gen_reloc): Keep the original fx_offset for RELA pc-relative
- relocs, but adjust by md_pcrel_from_section. Create R_ARM_ABS12
- relocations for BFD_RELOC_ARM_OFFSET_IMM on RELA targets.
+2007-01-12 Alan Modra <amodra@bigpond.net.au>
-2006-03-06 Bob Wilson <bob.wilson@acm.org>
+ * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
+ * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
+ * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
+ (TC_FORCE_RELOCATION): Define.
+ (TC_FORCE_RELOCATION_LOCAL): Define.
+ * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
- * config/tc-xtensa.c (xtensa_post_relax_hook): Generate literal tables
- even when using the text-section-literals option.
+2007-01-12 Alan Modra <amodra@bigpond.net.au>
-2006-03-06 Nathan Sidwell <nathan@codesourcery.com>
+ * input-file.c (input_file_open): Check fgets return.
- * config/tc-m68k.c (m68k_extensions): Allow 'float' on both m68k
- and cf.
- (m68k_ip): <case 'J'> Check we have some control regs.
- (md_parse_option): Allow raw arch switch.
- (m68k_init_arch): Better detection of arch/cpu mismatch. Detect
- whether 68881 or cfloat was meant by -mfloat.
- (md_show_usage): Adjust extension display.
- (m68k_elf_final_processing): Adjust.
+2007-01-11 Paul Brook <paul@codesourcery.com>
-2006-03-03 Bjoern Haase <bjoern.m.haase@web.de>
+ * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
- * config/tc-avr.c (avr_mod_hash_value): New function.
- (md_apply_fix, exp_mod): Use BFD_RELOC_HH8_LDI and
- BFD_RELOC_MS8_LDI for hlo8() and hhi8()
- (md_begin): Set linkrelax variable to 1, use avr_mod_hash_value
- instead of int avr_ldi_expression: use avr_mod_hash_value instead
- of (int).
- (tc_gen_reloc): Handle substractions of symbols, if possible do
- fixups, abort otherwise.
- * config/tc-avr.h (TC_LINKRELAX_FIXUP, TC_VALIDATE_FIX,
- tc_fix_adjustable): Define.
+2007-01-11 Nick Clifton <nickc@redhat.com>
-2006-03-02 James E Wilson <wilson@specifix.com>
+ PR gas/3707
+ * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
+ variable.
- * config/tc-ia64.c (emit_one_bundle): For IA64_OPCODE_LAST, if we
- change the template, then clear md.slot[curr].end_of_insn_group.
+ * config/tc-mcore.c (md_number_to_chars): Use
+ number_to_chars_{big|little}endian.
-2006-02-28 Jan Beulich <jbeulich@novell.com>
+2007-01-08 Kazu Hirata <kazu@codesourcery.com>
- * macro.c (get_any_string): Don't insert quotes for <>-quoted input.
+ * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
+ architecture by itself.
+ (m68k_ip): Don't issue a warning for tbl instructions on fido.
+ (m68k_elf_final_processing): Treat Fido as an architecture by
+ itself.
-2006-02-28 Jan Beulich <jbeulich@novell.com>
+2007-01-08 Kai Tietz <kai.tietz@onevision.com>
- PR/1070
- * macro.c (getstring): Don't treat parentheses special anymore.
- (get_any_string): Don't consider '(' and ')' as quoting anymore.
- Special-case '(', ')', '[', and ']' when dealing with non-quoting
- characters.
+ * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
-2006-02-28 Mat <mat@csail.mit.edu>
+2007-01-05 H.J. Lu <hongjiu.lu@intel.com>
- * dwarf2dbg.c (get_filenum): Don't inadvertently decrease files_in_use.
+ * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
+ depending on allow_naked_reg.
-2006-02-27 Jakub Jelinek <jakub@redhat.com>
+2007-01-04 Paul Brook <paul@codesourcery.com>
- * dw2gencfi.c (struct fde_entry, struct cie_entry): Add signal_frame
- field.
- (CFI_signal_frame): Define.
- (cfi_pseudo_table): Add .cfi_signal_frame.
- (dot_cfi): Handle CFI_signal_frame.
- (output_cie): Handle cie->signal_frame.
- (select_cie_for_fde): Don't share CIE if signal_frame flag is
- different. Copy signal_frame from FDE to newly created CIE.
- * doc/as.texinfo: Document .cfi_signal_frame.
+ * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
-2006-02-27 Carlos O'Donell <carlos@codesourcery.com>
+2007-01-04 H.J. Lu <hongjiu.lu@intel.com>
- * doc/Makefile.am: Add html target.
- * doc/Makefile.in: Regenerate.
- * po/Make-in: Add html target.
-
-2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (output_insn): Support Intel Merom New
- Instructions.
-
- * config/tc-i386.h (CpuMNI): New.
- (CpuUnknownFlags): Add CpuMNI.
-
-2006-02-24 David S. Miller <davem@sunset.davemloft.net>
-
- * config/tc-sparc.c (priv_reg_table): Add entry for "gl".
- (hpriv_reg_table): New table for hyperprivileged registers.
- (sparc_ip): New cases '$' and '%' for wrhpr/rdhpr hyperprivileged
- register encoding.
-
-2006-02-24 DJ Delorie <dj@redhat.com>
-
- * config/tc-m32c.h (md_apply_fix): Define to m32c_apply_fix.
- (tc_gen_reloc): Don't define.
- * config/tc-m32c.c (rl_for, relaxable): New convenience macros.
- (OPTION_LINKRELAX): New.
- (md_longopts): Add it.
- (m32c_relax): New.
- (md_parse_options): Set it.
- (md_assemble): Emit relaxation relocs as needed.
- (md_convert_frag): Emit relaxation relocs as needed.
- (md_cgen_lookup_reloc): Add LAB_8_8 and LAB_8_16.
- (m32c_apply_fix): New.
- (tc_gen_reloc): New.
- (m32c_force_relocation): Force out jump relocs when relaxing.
- (m32c_fix_adjustable): Return false if relaxing.
-
-2006-02-24 Paul Brook <paul@codesourcery.com>
-
- * config/arm/tc-arm.c (arm_ext_v6_notm, arm_ext_div, arm_ext_v7,
- arm_ext_v7a, arm_ext_v7r, arm_ext_v7m): New variables.
- (struct asm_barrier_opt): Define.
- (arm_v7m_psr_hsh, arm_barrier_opt_hsh): New variables.
- (parse_psr): Accept V7M psr names.
- (parse_barrier): New function.
- (enum operand_parse_code): Add OP_oBARRIER.
- (parse_operands): Implement OP_oBARRIER.
- (do_barrier): New function.
- (do_dbg, do_pli, do_t_barrier, do_t_dbg, do_t_div): New functions.
- (do_t_cpsi): Add V7M restrictions.
- (do_t_mrs, do_t_msr): Validate V7M variants.
- (md_assemble): Check for NULL variants.
- (v7m_psrs, barrier_opt_names): New tables.
- (insns): Add V7 instructions. Mark V6 instructions absent from V7M.
- (md_begin): Initialize arm_v7m_psr_hsh and arm_barrier_opt_hsh.
- (arm_cpu_option_table): Add Cortex-M3, R4 and A8.
- (arm_arch_option_table): Add armv7, armv7a, armv7r and armv7m.
- (struct cpu_arch_ver_table): Define.
- (cpu_arch_ver): New.
- (aeabi_set_public_attributes): Use cpu_arch_ver. Set
- Tag_CPU_arch_profile.
- * doc/c-arm.texi: Document new cpu and arch options.
-
-2006-02-23 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-ia64.c (operand_match): Handle IA64_OPND_IMMU5b.
-
-2006-02-23 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-ia64.c: Update copyright years.
-
-2006-02-22 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-ia64.c (specify_resource): Add the rule 17 from
- SDM 2.2.
-
-2005-02-22 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (do_pld): Remove incorrect write to
- inst.instruction.
- (encode_thumb32_addr_mode): Use correct operand.
-
-2006-02-21 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (md_apply_fix): Fix off-by-one errors.
-
-2006-02-17 Shrirang Khisti <shrirangk@kpitcummins.com>
- Anil Paranjape <anilp1@kpitcummins.com>
- Shilin Shakti <shilins@kpitcummins.com>
-
- * Makefile.am: Add xc16x related entry.
- * Makefile.in: Regenerate.
- * configure.in: Added xc16x related entry.
- * configure: Regenerate.
- * config/tc-xc16x.h: New file
- * config/tc-xc16x.c: New file
- * doc/c-xc16x.texi: New file for xc16x
- * doc/all.texi: Entry for xc16x
- * doc/Makefile.texi: Added c-xc16x.texi
- * NEWS: Announce the support for the new target.
+ PR gas/3830
+ * config/tc-i386.c (register_prefix): New.
+ (set_intel_syntax): Set set_intel_syntax to "" if register
+ prefix isn't needed.
+ (check_byte_reg): Use register_prefix for error message.
+ (check_long_reg): Likewise.
+ (check_qword_reg): Likewise.
+ (check_word_reg): Likewise.
-2006-02-16 Nick Hudson <nick.hudson@dsl.pipex.com>
+2006-01-04 Julian Brown <julian@codesourcery.com>
- * configure.tgt: set emulation for mips-*-netbsd*
+ * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
+ (do_neon_qshl_imm): Likewise.
+ (do_neon_rshl): New function. Handle rounding variants of
+ v{q}shl-by-register.
+ (insns): Use do_neon_rshl for vrshl, vqrshl.
-2006-02-14 Jakub Jelinek <jakub@redhat.com>
+2007-01-04 Paul Brook <paul@codesourcery.com>
- * config.in: Rebuilt.
+ * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
+ and vacle.
-2006-02-13 Bob Wilson <bob.wilson@acm.org>
+2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
- * config/tc-xtensa.c (xg_add_opcode_fix): Number operands starting
- from 1, not 0, in error messages.
- (md_assemble): Simplify special-case check for ENTRY instructions.
- (tinsn_has_invalid_symbolic_operands): Do not include opcode and
- operand in error message.
+ * config/tc-i386.c (swap_operands): Remove branches.
-2006-02-13 Joseph S. Myers <joseph@codesourcery.com>
+2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
- * configure.tgt (arm-*-linux-gnueabi*): Change to
- arm-*-linux-*eabi*.
+ * config/tc-i386.c: Update copyright year.
+ * config/tc-i386.h: Likewise.
-2006-02-10 Nick Clifton <nickc@redhat.com>
+2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
- * config/tc-crx.c (check_range): Ensure that the sign bit of a
- 32-bit value is propagated into the upper bits of a 64-bit long.
+ * config/tc-i386.c (smallest_imm_type): Return unsigned int
+ instead of int.
- * config/tc-arc.c (init_opcode_tables): Fix cast.
- (arc_extoper, md_operand): Likewise.
+2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
-2006-02-09 David Heine <dlheine@tensilica.com>
+ * config/tc-i386.c: Convert to ISO C90 formatting
+ * config/tc-i386.h: Likewise.
- * config/tc-xtensa.c (xg_assembly_relax): Increment steps_taken for
- each relaxation step.
+2007-01-03 David Daney <ddaney@avtrex.com>
-2006-02-09 Eric Botcazou <ebotcazou@libertysurf.fr>
+ * config/tc-mips.c (md_show_usage): Clean up -mno-shared
+ documentation.
- * configure.in (CHECK_DECLS): Add vsnprintf.
- * configure: Regenerate.
- * messages.c (errno.h, stdarg.h, varargs.h, va_list): Do not
- include/declare here, but...
- * as.h: Move code detecting VARARGS idiom to the top.
- (errno.h, stdarg.h, varargs.h, va_list): ...here.
- (vsnprintf): Declare if not already declared.
-
-2006-02-08 H.J. Lu <hongjiu.lu@intel.com>
-
- * as.c (close_output_file): New.
- (main): Register close_output_file with xatexit before
- dump_statistics. Don't call output_file_close.
-
-2006-02-07 Nathan Sidwell <nathan@codesourcery.com>
-
- * config/tc-m68k.c (mcf5208_control_regs, mcf5213_control_regs,
- mcf5329_control_regs): New.
- (not_current_architecture, selected_arch, selected_cpu): New.
- (m68k_archs, m68k_extensions): New.
- (archs): Renamed to ...
- (m68k_cpus): ... here. Adjust.
- (n_arches): Remove.
- (md_pseudo_table): Add arch and cpu directives.
- (find_cf_chip, m68k_ip): Adjust table scanning.
- (no_68851, no_68881): Remove.
- (md_assemble): Lazily initialize.
- (select_control_regs): Adjust cpu names. Add 5208, 5213, 5329.
- (md_init_after_args): Move functionality to m68k_init_arch.
- (mri_chip): Adjust table scanning.
- (md_parse_option): Reimplement 'm' processing to add -march & -mcpu
- options with saner parsing.
- (m68k_lookup_cpu, m68k_set_arch, m68k_set_cpu, m68k_set_extension,
- m68k_init_arch): New.
- (s_m68k_cpu, s_m68k_arch): New.
- (md_show_usage): Adjust.
- (m68k_elf_final_processing): Set CF EF flags.
- * config/tc-m68k.h (m68k_init_after_args): Remove.
- (tc_init_after_args): Remove.
- * doc/c-m68k.texi (M68K-Opts): Document -march, -mcpu options.
- (M68k-Directives): Document .arch and .cpu directives.
-
-2006-02-05 Arnold Metselaar <arnold.metselaar@planet.nl>
-
- * config/tc-z80.c (z80_start_line_hook): allow .equ and .defl as
- synonyms for equ and defl.
- (z80_cons_fix_new): New function.
- (emit_byte): Disallow relative jumps to absolute locations.
- (emit_data): Only handle defb, prototype changed, because defb is
- now handled as pseudo-op rather than an instruction.
- (instab): Entries for defb,defw,db,dw moved from here...
- (md_pseudo_table): ... to here, use generic cons() for defw,dw.
- Add entries for def24,def32,d24,d32.
- (md_assemble): Improved error handling.
- (md_apply_fix): New case BFD_RELOC_24, set fixP->fx_no_overflow to one.
- * config/tc-z80.h (TC_CONS_FIX_NEW): Define.
- (z80_cons_fix_new): Declare.
- * doc/c-z80.texi (defb, db): Mention warning on overflow.
- (def24,d24,def32,d32): New pseudo-ops.
-
-2006-02-02 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (do_shift): Remove Thumb-1 constraint.
-
-2005-02-02 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (T2_OPCODE_MASK, T2_DATA_OP_SHIFT, T2_OPCODE_AND,
- T2_OPCODE_BIC, T2_OPCODE_ORR, T2_OPCODE_ORN, T2_OPCODE_EOR,
- T2_OPCODE_ADD, T2_OPCODE_ADC, T2_OPCODE_SBC, T2_OPCODE_SUB,
- T2_OPCODE_RSB): Define.
- (thumb32_negate_data_op): New function.
- (md_apply_fix): Use it.
-
-2006-01-31 Bob Wilson <bob.wilson@acm.org>
-
- * config/xtensa-istack.h (TInsn): Remove record_fix and sub_symbol
- fields.
- * config/tc-xtensa.h (xtensa_frag_type): Remove slot_sub_symbols field.
- * config/tc-xtensa.c (md_apply_fix): Check for unexpected uses of
- subtracted symbols.
- (relaxation_requirements): Add pfinish_frag argument and use it to
- replace setting tinsn->record_fix fields.
- (xg_assemble_vliw_tokens): Adjust calls to relaxation_requirements
- and vinsn_to_insnbuf. Remove references to record_fix and
- slot_sub_symbols fields.
- (xtensa_mark_narrow_branches): Delete unused code.
- (is_narrow_branch_guaranteed_in_range): Handle expr that is not just
- a symbol.
- (convert_frag_immed): Adjust vinsn_to_insnbuf call and do not set
- record_fix fields.
- (tinsn_immed_from_frag): Remove code for handling slot_sub_symbols.
- (vinsn_to_insnbuf): Change use of record_fixup argument, replacing use
- of the record_fix field. Simplify error messages for unexpected
- symbolic operands.
- (set_expr_symbol_offset_diff): Delete.
-
-2006-01-31 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (arm_reg_parse): Check if reg is non-NULL.
-
-2006-01-31 Paul Brook <paul@codesourcery.com>
- Richard Earnshaw <rearnsha@arm.com>
-
- * config/tc-arm.c: Use arm_feature_set.
- (arm_ext_*, arm_arch_full, arm_arch_t2, arm_arch_none,
- arm_cext_iwmmxt, arm_cext_xscale, arm_cext_maverick, fpu_fpa_ext_v1,
- fpu_fpa_ext_v2, fpu_vfp_ext_v1xd, fpu_vfp_ext_v1, fpu_vfp_ext_v2):
- New variables.
- (insns): Use them.
- (md_atof, opcode_select, opcode_select, md_assemble, md_assemble,
- md_begin, arm_parse_extension, arm_parse_cpu, arm_parse_arch,
- arm_parse_fpu, arm_parse_float_abi, aeabi_set_public_attributes,
- s_arm_cpu, s_arm_arch, s_arm_fpu): Use macros for accessing CPU
- feature flags.
- (arm_legacy_option_table, arm_option_cpu_value_table): New types.
- (arm_opts): Move old cpu/arch options from here...
- (arm_legacy_opts): ... to here.
- (md_parse_option): Search arm_legacy_opts.
- (arm_cpus, arm_archs, arm_extensions, arm_fpus)
- (arm_float_abis, arm_eabis): Make const.
-
-2006-01-25 Bob Wilson <bob.wilson@acm.org>
-
- * config/tc-xtensa.c (md_apply_fix): Set value to zero for PLT relocs.
-
-2006-01-21 Jie Zhang <jie.zhang@analog.com>
-
- * config/bfin-parse.y (asm_1): Check value range for 16 bit immediate
- in load immediate intruction.
-
-2006-01-21 Jie Zhang <jie.zhang@analog.com>
-
- * config/bfin-parse.y (value_match): Use correct conversion
- specifications in template string for __FILE__ and __LINE__.
- (binary): Ditto.
- (unary): Ditto.
-
-2006-01-18 Alexandre Oliva <aoliva@redhat.com>
-
- Introduce TLS descriptors for i386 and x86_64.
- * config/tc-i386.c (tc_i386_fix_adjustable): Handle
- BFD_RELOC_386_TLS_GOTDESC, BFD_RELOC_386_TLS_DESC_CALL,
- BFD_RELOC_X86_64_GOTPC32_TLSDESC, BFD_RELOC_X86_64_TLSDESC_CALL.
- (optimize_disp): Emit fix up for BFD_RELOC_386_TLS_DESC_CALL and
- BFD_RELOC_X86_64_TLSDESC_CALL immediately, and clear the
- displacement bits.
- (build_modrm_byte): Set up zero modrm for TLS desc calls.
- (lex_got): Handle @tlsdesc and @tlscall.
- (md_apply_fix, tc_gen_reloc): Handle the new relocations.
-
-2006-01-11 Nick Clifton <nickc@redhat.com>
-
- Fixes for building on 64-bit hosts:
- * config/tc-avr.c (mod_index): New union to allow conversion
- between pointers and integers.
- (md_begin, avr_ldi_expression): Use it.
- * config/tc-i370.c (md_assemble): Add cast for argument to print
- statement.
- * config/tc-tic54x.c (subsym_substitute): Likewise.
- * config/tc-mn10200.c (md_assemble): Use a union to convert the
- opindex field of fr_cgen structure into a pointer so that it can
- be stored in a frag.
- * config/tc-mn10300.c (md_assemble): Likewise.
- * config/tc-frv.c (frv_debug_tomcat): Use %p to print pointer
- types.
- * config/tc-v850.c: Replace uses of (int) casts with correct
- types.
-
-2006-01-09 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/2117
- * symbols.c (snapshot_symbol): Don't change a defined symbol.
-
-2006-01-03 Hans-Peter Nilsson <hp@bitrange.com>
-
- PR gas/2101
- * config/tc-mmix.c (mmix_handle_mmixal): Don't treat #[0-9][FB] as
- a local-label reference.
-
-For older changes see ChangeLog-2005
+For older changes see ChangeLog-2006
\f
Local Variables:
mode: change-log