x = ($2) $1;
], gas_cv_decl_needed_$1=no, gas_cv_decl_needed_$1=yes))dnl
AC_MSG_RESULT($gas_cv_decl_needed_$1)
-test $gas_cv_decl_needed_$1 = no || {
- ifelse(index($1,[$]),-1,
- [AC_DEFINE([NEED_DECLARATION_]translit($1, [a-z], [A-Z]))],
- [gas_decl_name_upcase=`echo $1 | tr '[a-z]' '[A-Z]'`
- AC_DEFINE_UNQUOTED(NEED_DECLARATION_$gas_decl_name_upcase)])
-}
+if test $gas_cv_decl_needed_$1 = yes; then
+ AC_DEFINE([NEED_DECLARATION_]translit($1, [a-z], [A-Z]), 1,
+ [Define if $1 is not declared in system header files.])
+fi
])dnl
dnl
dnl Some non-ANSI preprocessors botch requoting inside strings. That's bad
|| c == d);
], gas_cv_assert_ok=yes, gas_cv_assert_ok=no))dnl
AC_MSG_RESULT($gas_cv_assert_ok)
-test $gas_cv_assert_ok = yes || AC_DEFINE(BROKEN_ASSERT)
+test $gas_cv_assert_ok = yes || AC_DEFINE(BROKEN_ASSERT, 1, [assert broken?])
])dnl
dnl
dnl Since many Bourne shell implementations lack subroutines, use this
AC_SUBST($1)])
-# serial 25 AM_PROG_LIBTOOL
-AC_DEFUN(AM_PROG_LIBTOOL,
-[AC_REQUIRE([AM_ENABLE_SHARED])dnl
-AC_REQUIRE([AM_ENABLE_STATIC])dnl
+# serial 40 AC_PROG_LIBTOOL
+AC_DEFUN(AC_PROG_LIBTOOL,
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+
+# Save cache, so that ltconfig can load it
+AC_CACHE_SAVE
+
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
+|| AC_MSG_ERROR([libtool configure failed])
+
+# Reload cache, that may have been modified by ltconfig
+AC_CACHE_LOAD
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+AC_DEFUN(AC_LIBTOOL_SETUP,
+[AC_PREREQ(2.13)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AM_PROG_LD])dnl
-AC_REQUIRE([AM_PROG_NM])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
+
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
# Check for any special flags to pass to ltconfig.
-libtool_flags=
+libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+ [ --disable-libtool-lock avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case "$host" in
+case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
;;
-*-*-cygwin*)
- AM_SYS_LIBTOOL_CYGWIN
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
-
+])
esac
+])
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-# AM_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AM_ENABLE_SHARED[(DEFAULT)]
+# AC_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AM_ENABLE_SHARED,
-[define([AM_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
-<< --enable-shared[=PKGS] build shared libraries [default=>>AM_ENABLE_SHARED_DEFAULT],
+<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
IFS="$ac_save_ifs"
;;
esac],
-enable_shared=AM_ENABLE_SHARED_DEFAULT)dnl
+enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])
-# AM_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AM_DISABLE_SHARED,
-[AM_ENABLE_SHARED(no)])
+# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
-# AM_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AM_DISABLE_STATIC,
-[AM_ENABLE_STATIC(no)])
-
-# AM_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AM_ENABLE_STATIC[(DEFAULT)]
+# AC_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AM_ENABLE_STATIC,
-[define([AM_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
-<< --enable-static[=PKGS] build static libraries [default=>>AM_ENABLE_STATIC_DEFAULT],
+<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
IFS="$ac_save_ifs"
;;
esac],
-enable_static=AM_ENABLE_STATIC_DEFAULT)dnl
+enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
])
+# AC_DISABLE_STATIC - set the default static flag to --disable-static
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
+
-# AM_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AM_PROG_LD,
+# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
+# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(fast-install,
+changequote(<<, >>)dnl
+<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
+])
+
+# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
+
+# AC_PROG_LD - find the path to the GNU or non-GNU linker
+AC_DEFUN(AC_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
- # Accept absolute paths.
+ # Accept absolute paths.
changequote(,)dnl
- /* | [A-Za-z]:\\*)
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
- test -z "$LD" && LD="$ac_prog"
- ;;
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
- test "$with_gnu_ld" != yes && break
+ test "$with_gnu_ld" != yes && break
fi
fi
done
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
-AM_PROG_LD_GNU
+AC_PROG_LD_GNU
])
-AC_DEFUN(AM_PROG_LD_GNU,
+AC_DEFUN(AC_PROG_LD_GNU,
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
fi])
])
-# AM_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN(AM_PROG_NM,
+# AC_PROG_NM - find the path to a BSD-compatible name lister
+AC_DEFUN(AC_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
ac_cv_path_NM="$NM"
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
+ ac_cv_path_NM="$ac_dir/nm -B"
+ break
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
+ ac_cv_path_NM="$ac_dir/nm -p"
+ break
else
- ac_cv_path_NM="$ac_dir/nm"
+ ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
fi
- break
fi
done
IFS="$ac_save_ifs"
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
-AC_SUBST(NM)
])
-# AM_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin
-AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN,
-[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-AC_CHECK_TOOL(AS, as, false)
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case "$lt_target" in
+*-*-beos* | *-*-cygwin*)
+ # These system don't have libm
+ ;;
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
+ ;;
+*)
+ AC_CHECK_LIB(m, main, LIBM="-lm")
+ ;;
+esac
+])
+
+# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl convenience library, adds --enable-ltdl-convenience to
+# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
+# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
+# to be `${top_builddir}/libltdl'. Make sure you start DIR with
+# '${top_builddir}/' (note the single quotes!) if your package is not
+# flat, and, if you're not using automake, define top_builddir as
+# appropriate in the Makefiles.
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ case "$enable_ltdl_convenience" in
+ no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+ "") enable_ltdl_convenience=yes
+ ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+ esac
+ LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+])
+
+# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl installable library, and adds --enable-ltdl-install to
+# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
+# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
+# to be `${top_builddir}/libltdl'. Make sure you start DIR with
+# '${top_builddir}/' (note the single quotes!) if your package is not
+# flat, and, if you're not using automake, define top_builddir as
+# appropriate in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ AC_CHECK_LIB(ltdl, main,
+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+ [if test x"$enable_ltdl_install" = xno; then
+ AC_MSG_WARN([libltdl not installed, but installation disabled])
+ else
+ enable_ltdl_install=yes
+ fi
+ ])
+ if test x"$enable_ltdl_install" = x"yes"; then
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
+ LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+ else
+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+ LIBLTDL="-lltdl"
+ INCLTDL=
+ fi
])
+dnl old names
+AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
+AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
+AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
+AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
+AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
+AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
+AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
+
# Like AC_CONFIG_HEADER, but automatically create stamp file.
AC_DEFUN(AM_CONFIG_HEADER,
projects / deliverable / binutils-gdb.git / blobdiff