/* This is the Assembler Pre-Processor
- Copyright (C) 1987, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 2000
+ Copyright 1987, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+ 1999, 2000, 2002, 2003
Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
Software Foundation, 59 Temple Place - Suite 330, Boston, MA
02111-1307, USA. */
-/* Modified by Allen Wirfs-Brock, Instantiations Inc 2/90 */
+/* Modified by Allen Wirfs-Brock, Instantiations Inc 2/90. */
/* App, the assembler pre-processor. This pre-processor strips out excess
spaces, turns single-quoted characters into a decimal constant, and turns
# <number> <filename> <garbage> into a .line <number>\n.file <filename>
pair. This needs better error-handling. */
#include <stdio.h>
-#include "as.h" /* For BAD_CASE() only */
+#include "as.h" /* For BAD_CASE() only. */
#if (__STDC__ != 1)
#ifndef const
flag_m68k_mri, because the two flags will be affected by the .mri
pseudo-op at different times. */
static int scrub_m68k_mri;
-#else
-#define scrub_m68k_mri 0
-#endif
/* The pseudo-op which switches in and out of MRI mode. See the
comment in do_scrub_chars. */
static const char mri_pseudo[] = ".mri 0";
+#else
+#define scrub_m68k_mri 0
+#endif
#if defined TC_ARM && defined OBJ_ELF
-/* The pseudo-op for which we need to special-case `@' characters.
+/* The pseudo-op for which we need to special-case `@' characters.
See the comment in do_scrub_chars. */
static const char symver_pseudo[] = ".symver";
static const char * symver_state;
#ifdef DOUBLEBAR_PARALLEL
#define LEX_IS_DOUBLEBAR_1ST 13
#endif
+#define LEX_IS_PARALLEL_SEPARATOR 14
#define IS_SYMBOL_COMPONENT(c) (lex[c] == LEX_IS_SYMBOL_COMPONENT)
#define IS_WHITESPACE(c) (lex[c] == LEX_IS_WHITESPACE)
#define IS_LINE_SEPARATOR(c) (lex[c] == LEX_IS_LINE_SEPARATOR)
+#define IS_PARALLEL_SEPARATOR(c) (lex[c] == LEX_IS_PARALLEL_SEPARATOR)
#define IS_COMMENT(c) (lex[c] == LEX_IS_COMMENT_START)
#define IS_LINE_COMMENT(c) (lex[c] == LEX_IS_LINE_COMMENT_START)
#define IS_NEWLINE(c) (lex[c] == LEX_IS_NEWLINE)
/* FIXME-soon: The entire lexer/parser thingy should be
built statically at compile time rather than dynamically
- each and every time the assembler is run. xoxorich. */
+ each and every time the assembler is run. xoxorich. */
-void
+void
do_scrub_begin (m68k_mri)
int m68k_mri ATTRIBUTE_UNUSED;
{
lex['\t'] = LEX_IS_WHITESPACE;
lex['\r'] = LEX_IS_WHITESPACE;
lex['\n'] = LEX_IS_NEWLINE;
- lex[';'] = LEX_IS_LINE_SEPARATOR;
lex[':'] = LEX_IS_COLON;
#ifdef TC_M68K
lex['"'] = LEX_IS_STRINGQUOTE;
#if ! defined (TC_HPPA) && ! defined (TC_I370)
- /* I370 uses single-quotes to delimit integer, float constants */
+ /* I370 uses single-quotes to delimit integer, float constants. */
lex['\''] = LEX_IS_ONECHAR_QUOTE;
#endif
/* Note that these override the previous defaults, e.g. if ';' is a
comment char, then it isn't a line separator. */
for (p = symbol_chars; *p; ++p)
- {
- lex[(unsigned char) *p] = LEX_IS_SYMBOL_COMPONENT;
- } /* declare symbol characters */
+ lex[(unsigned char) *p] = LEX_IS_SYMBOL_COMPONENT;
for (c = 128; c < 256; ++c)
lex[c] = LEX_IS_SYMBOL_COMPONENT;
#define tc_comment_chars comment_chars
#endif
for (p = tc_comment_chars; *p; p++)
- {
- lex[(unsigned char) *p] = LEX_IS_COMMENT_START;
- } /* declare comment chars */
+ lex[(unsigned char) *p] = LEX_IS_COMMENT_START;
for (p = line_comment_chars; *p; p++)
- {
- lex[(unsigned char) *p] = LEX_IS_LINE_COMMENT_START;
- } /* declare line comment chars */
+ lex[(unsigned char) *p] = LEX_IS_LINE_COMMENT_START;
for (p = line_separator_chars; *p; p++)
- {
- lex[(unsigned char) *p] = LEX_IS_LINE_SEPARATOR;
- } /* declare line separators */
+ lex[(unsigned char) *p] = LEX_IS_LINE_SEPARATOR;
+
+#ifdef tc_parallel_separator_chars
+ /* This macro permits the processor to specify all characters which
+ separate parallel insns on the same line. */
+ for (p = tc_parallel_separator_chars; *p; p++)
+ lex[(unsigned char) *p] = LEX_IS_PARALLEL_SEPARATOR;
+#endif
/* Only allow slash-star comments if slash is not in use.
FIXME: This isn't right. We should always permit them. */
if (lex['/'] == 0)
- {
- lex['/'] = LEX_IS_TWOCHAR_COMMENT_1ST;
- }
+ lex['/'] = LEX_IS_TWOCHAR_COMMENT_1ST;
#ifdef TC_M68K
if (m68k_mri)
lex[';'] = LEX_IS_COMMENT_START;
lex['*'] = LEX_IS_LINE_COMMENT_START;
/* The MRI documentation says '!' is LEX_IS_COMMENT_START, but
- then it can't be used in an expression. */
+ then it can't be used in an expression. */
lex['!'] = LEX_IS_LINE_COMMENT_START;
}
#endif
lex['|'] = LEX_IS_DOUBLEBAR_1ST;
#endif
#ifdef TC_D30V
- /* must do this is we want VLIW instruction with "->" or "<-" */
+ /* Must do this is we want VLIW instruction with "->" or "<-". */
lex['-'] = LEX_IS_SYMBOL_COMPONENT;
#endif
-} /* do_scrub_begin() */
+}
-/* Saved state of the scrubber */
+/* Saved state of the scrubber. */
static int state;
static int old_state;
static char *out_string;
That's why we have to save it all. */
struct app_save
- {
- int state;
- int old_state;
- char * out_string;
- char out_buf[sizeof (out_buf)];
- int add_newlines;
- char * saved_input;
- int saved_input_len;
+{
+ int state;
+ int old_state;
+ char * out_string;
+ char out_buf[sizeof (out_buf)];
+ int add_newlines;
+ char * saved_input;
+ int saved_input_len;
#ifdef TC_M68K
- int scrub_m68k_mri;
+ int scrub_m68k_mri;
#endif
- const char * mri_state;
- char mri_last_ch;
+ const char * mri_state;
+ char mri_last_ch;
#if defined TC_ARM && defined OBJ_ELF
- const char * symver_state;
+ const char * symver_state;
#endif
- };
+};
char *
app_push ()
saved->symver_state = symver_state;
#endif
- /* do_scrub_begin() is not useful, just wastes time. */
+ /* do_scrub_begin() is not useful, just wastes time. */
state = 0;
saved_input = NULL;
return (char *) saved;
}
-void
+void
app_pop (arg)
char *arg;
{
register struct app_save *saved = (struct app_save *) arg;
- /* There is no do_scrub_end (). */
+ /* There is no do_scrub_end (). */
state = saved->state;
old_state = saved->old_state;
out_string = saved->out_string;
#endif
free (arg);
-} /* app_pop() */
+}
/* @@ This assumes that \n &c are the same on host and target. This is not
necessarily true. */
-static int
+
+static int
process_escape (ch)
int ch;
{
-1: output string in out_string and go to the state in old_state
-2: flush text until a '*' '/' is seen, then go to state old_state
#ifdef TC_V850
- 12: After seeing a dash, looking for a second dash as a start of comment.
+ 12: After seeing a dash, looking for a second dash as a start
+ of comment.
#endif
#ifdef DOUBLEBAR_PARALLEL
- 13: After seeing a vertical bar, looking for a second vertical bar as a parallel expression seperator.
+ 13: After seeing a vertical bar, looking for a second
+ vertical bar as a parallel expression separator.
+#endif
+#ifdef TC_IA64
+ 14: After seeing a `(' at state 0, looking for a `)' as
+ predicate.
+ 15: After seeing a `(' at state 1, looking for a `)' as
+ predicate.
#endif
*/
/* I added states 9 and 10 because the MIPS ECOFF assembler uses
constructs like ``.loc 1 20''. This was turning into ``.loc
120''. States 9 and 10 ensure that a space is never dropped in
- between characters which could appear in a identifier. Ian
+ between characters which could appear in an identifier. Ian
Taylor, ian@cygnus.com.
I added state 11 so that something like "Lfoo add %r25,%r26,%r27" works
I don't want to make such a significant change to the assembler's
memory usage. */
-#define PUT(pch) \
- do \
- { \
- *to++ = (pch); \
- if (to >= toend) \
- goto tofull; \
- } \
+#define PUT(pch) \
+ do \
+ { \
+ *to++ = (pch); \
+ if (to >= toend) \
+ goto tofull; \
+ } \
while (0)
if (saved_input != NULL)
while (1)
{
/* The cases in this switch end with continue, in order to
- branch back to the top of this while loop and generate the
- next output character in the appropriate state. */
+ branch back to the top of this while loop and generate the
+ next output character in the appropriate state. */
switch (state)
{
case -1:
case 5:
/* We are going to copy everything up to a quote character,
- with special handling for a backslash. We try to
- optimize the copying in the simple case without using the
- GET and PUT macros. */
+ with special handling for a backslash. We try to
+ optimize the copying in the simple case without using the
+ GET and PUT macros. */
{
char *s;
int len;
{
ch = *s;
/* This condition must be changed if the type of any
- other character can be LEX_IS_STRINGQUOTE. */
+ other character can be LEX_IS_STRINGQUOTE. */
if (ch == '\\'
|| ch == '"'
|| ch == '\''
ch = GET ();
if (ch == EOF)
{
- as_warn (_("end of file in string: inserted '\"'"));
+ as_warn (_("end of file in string; inserted '\"'"));
state = old_state;
UNGET ('\n');
PUT ('"');
else if (scrub_m68k_mri && ch == '\n')
{
/* Just quietly terminate the string. This permits lines like
- bne label loop if we haven't reach end yet
- */
+ bne label loop if we haven't reach end yet. */
state = old_state;
UNGET (ch);
PUT ('\'');
PUT ('\\');
continue;
+ case EOF:
+ as_warn (_("end of file in string; '\"' inserted"));
+ PUT ('"');
+ continue;
+
case '"':
case '\\':
case 'b':
case '6':
case '7':
break;
-#if defined(IGNORE_NONSTANDARD_ESCAPES) | defined(ONLY_STANDARD_ESCAPES)
- default:
- as_warn (_("Unknown escape '\\%c' in string: Ignored"), ch);
- break;
-#else /* ONLY_STANDARD_ESCAPES */
+
default:
- /* Accept \x as x for any x */
+#ifdef ONLY_STANDARD_ESCAPES
+ as_warn (_("unknown escape '\\%c' in string; ignored"), ch);
+#endif
break;
-#endif /* ONLY_STANDARD_ESCAPES */
-
- case EOF:
- as_warn (_("End of file in string: '\"' inserted"));
- PUT ('"');
- continue;
}
PUT (ch);
continue;
state = 0;
PUT (ch);
continue;
+
+#ifdef DOUBLEBAR_PARALLEL
+ case 13:
+ ch = GET ();
+ if (ch != '|')
+ abort ();
+
+ /* Reset back to state 1 and pretend that we are parsing a
+ line from just after the first white space. */
+ state = 1;
+ PUT ('|');
+ continue;
+#endif
}
- /* OK, we are somewhere in states 0 through 4 or 9 through 11 */
+ /* OK, we are somewhere in states 0 through 4 or 9 through 11. */
/* flushchar: */
ch = GET ();
+#ifdef TC_IA64
+ if (ch == '(' && (state == 0 || state == 1))
+ {
+ state += 14;
+ PUT (ch);
+ continue;
+ }
+ else if (state == 14 || state == 15)
+ {
+ if (ch == ')')
+ state -= 14;
+ else
+ {
+ PUT (ch);
+ continue;
+ }
+ }
+#endif
+
recycle:
#if defined TC_ARM && defined OBJ_ELF
#ifdef TC_M68K
/* We want to have pseudo-ops which control whether we are in
- MRI mode or not. Unfortunately, since m68k MRI mode affects
- the scrubber, that means that we need a special purpose
- recognizer here. */
+ MRI mode or not. Unfortunately, since m68k MRI mode affects
+ the scrubber, that means that we need a special purpose
+ recognizer here. */
if (mri_state == NULL)
{
if ((state == 0 || state == 1)
else
{
/* We've read the entire pseudo-op. mips_last_ch is
- either '0' or '1' indicating whether to enter or
- leave MRI mode. */
+ either '0' or '1' indicating whether to enter or
+ leave MRI mode. */
do_scrub_begin (mri_last_ch == '1');
mri_state = NULL;
/* We continue handling the character as usual. The
- main gas reader must also handle the .mri pseudo-op
- to control expression parsing and the like. */
+ main gas reader must also handle the .mri pseudo-op
+ to control expression parsing and the like. */
}
}
#endif
}
#ifdef KEEP_WHITE_AROUND_COLON
- if (lex[ch] == LEX_IS_COLON)
- {
- /* only keep this white if there's no white *after* the colon */
- ch2 = GET ();
- UNGET (ch2);
- if (!IS_WHITESPACE (ch2))
- {
- state = 9;
- UNGET (ch);
- PUT (' ');
- break;
- }
- }
+ if (lex[ch] == LEX_IS_COLON)
+ {
+ /* Only keep this white if there's no white *after* the
+ colon. */
+ ch2 = GET ();
+ UNGET (ch2);
+ if (!IS_WHITESPACE (ch2))
+ {
+ state = 9;
+ UNGET (ch);
+ PUT (' ');
+ break;
+ }
+ }
#endif
if (IS_COMMENT (ch)
|| ch == '/'
- || IS_LINE_SEPARATOR (ch))
+ || IS_LINE_SEPARATOR (ch)
+ || IS_PARALLEL_SEPARATOR (ch))
{
if (scrub_m68k_mri)
{
else
{
/* We know that ch is not ':', since we tested that
- case above. Therefore this is not a label, so it
- must be the opcode, and we've just seen the
- whitespace after it. */
+ case above. Therefore this is not a label, so it
+ must be the opcode, and we've just seen the
+ whitespace after it. */
state = 3;
}
UNGET (ch);
break;
/* This UNGET will ensure that we count newlines
- correctly. */
+ correctly. */
UNGET (ch2);
}
case LEX_IS_STRINGQUOTE:
if (state == 10)
{
- /* Preserve the whitespace in foo "bar" */
+ /* Preserve the whitespace in foo "bar". */
UNGET (ch);
state = 3;
PUT (' ');
/* PUT didn't jump out. We could just break, but we
- know what will happen, so optimize a bit. */
+ know what will happen, so optimize a bit. */
ch = GET ();
old_state = 3;
}
case LEX_IS_ONECHAR_QUOTE:
if (state == 10)
{
- /* Preserve the whitespace in foo 'b' */
+ /* Preserve the whitespace in foo 'b'. */
UNGET (ch);
state = 3;
PUT (' ');
if ((ch = GET ()) != '\'')
{
#ifdef REQUIRE_CHAR_CLOSE_QUOTE
- as_warn (_("Missing close quote: (assumed)"));
+ as_warn (_("missing close quote; (assumed)"));
#else
if (ch != EOF)
UNGET (ch);
case LEX_IS_COLON:
#ifdef KEEP_WHITE_AROUND_COLON
- state = 9;
+ state = 9;
#else
if (state == 9 || state == 10)
state = 3;
--add_newlines;
UNGET (ch);
}
- /* fall thru into... */
+ /* Fall through. */
case LEX_IS_LINE_SEPARATOR:
state = 0;
PUT (ch);
break;
+ case LEX_IS_PARALLEL_SEPARATOR:
+ state = 1;
+ PUT (ch);
+ break;
+
#ifdef TC_V850
case LEX_IS_DOUBLEDASH_1ST:
- ch2 = GET();
+ ch2 = GET ();
if (ch2 != '-')
{
UNGET (ch2);
goto de_fault;
}
- /* read and skip to end of line */
+ /* Read and skip to end of line. */
do
{
ch = GET ();
}
while (ch != EOF && ch != '\n');
+
if (ch == EOF)
- {
- as_warn (_("end of file in comment; newline inserted"));
- }
+ as_warn (_("end of file in comment; newline inserted"));
+
state = 0;
PUT ('\n');
break;
-#endif
+#endif
#ifdef DOUBLEBAR_PARALLEL
case LEX_IS_DOUBLEBAR_1ST:
- ch2 = GET();
+ ch2 = GET ();
+ UNGET (ch2);
if (ch2 != '|')
- {
- UNGET (ch2);
- goto de_fault;
- }
- /* Reset back to state 1 and pretend that we are parsing a line from
- just after the first white space. */
- state = 1;
- PUT ('|');
+ goto de_fault;
+
+ /* Handle '||' in two states as invoking PUT twice might
+ result in the first one jumping out of this loop. We'd
+ then lose track of the state and one '|' char. */
+ state = 13;
PUT ('|');
break;
-#endif
+#endif
case LEX_IS_LINE_COMMENT_START:
/* FIXME-someday: The two character comment stuff was badly
thought out. On i386, we want '/' as line comment start
{
UNGET (ch2);
}
- } /* bad hack */
+ }
if (state == 0 || state == 1) /* Only comment at start of line. */
{
ch = GET ();
}
while (ch != EOF && IS_WHITESPACE (ch));
+
if (ch == EOF)
{
as_warn (_("end of file in comment; newline inserted"));
PUT ('\n');
break;
}
+
if (ch < '0' || ch > '9' || state != 0 || startch != '#')
{
/* Not a cpp line. */
while (ch != EOF && !IS_NEWLINE (ch))
ch = GET ();
if (ch == EOF)
- as_warn (_("EOF in Comment: Newline inserted"));
+ as_warn (_("end of file in comment; newline inserted"));
state = 0;
PUT ('\n');
break;
}
- /* Loks like `# 123 "filename"' from cpp. */
+ /* Looks like `# 123 "filename"' from cpp. */
UNGET (ch);
old_state = 4;
state = -1;
Trap is the only short insn that has a first operand that is
neither register nor label.
We must prevent exef0f ||trap #1 to degenerate to exef0f ||trap#1 .
- We can't make '#' LEX_IS_SYMBOL_COMPONENT because it is already
- LEX_IS_LINE_COMMENT_START. However, it is the only character in
- line_comment_chars for d10v, hence we can recognize it as such. */
+ We can't make '#' LEX_IS_SYMBOL_COMPONENT because it is
+ already LEX_IS_LINE_COMMENT_START. However, it is the
+ only character in line_comment_chars for d10v, hence we
+ can recognize it as such. */
/* An alternative approach would be to reset the state to 1 when
we see '||', '<'- or '->', but that seems to be overkill. */
- if (state == 10) PUT (' ');
+ if (state == 10)
+ PUT (' ');
#endif
/* We have a line comment character which is not at the
start of a line. If this is also a normal comment
#if defined TC_ARM && defined OBJ_ELF
/* On the ARM, `@' is the comment character.
Unfortunately this is also a special character in ELF .symver
- directives (and .type, though we deal with those another way). So
- we check if this line is such a directive, and treat the character
- as default if so. This is a hack. */
+ directives (and .type, though we deal with those another way).
+ So we check if this line is such a directive, and treat
+ the character as default if so. This is a hack. */
if ((symver_state != NULL) && (*symver_state == 0))
goto de_fault;
+#endif
+#ifdef WARN_COMMENTS
+ if (!found_comment)
+ as_where (&found_comment_file, &found_comment);
#endif
do
{
state = 9;
/* This is a common case. Quickly copy CH and all the
- following symbol component or normal characters. */
+ following symbol component or normal characters. */
if (to + 1 < toend
&& mri_state == NULL
#if defined TC_ARM && defined OBJ_ELF
{
int type;
- ch2 = * (unsigned char *) s;
+ ch2 = *(unsigned char *) s;
type = lex[ch2];
if (type != 0
&& type != LEX_IS_SYMBOL_COMPONENT)
break;
}
+
if (s > from)
- {
- /* Handle the last character normally, for
- simplicity. */
- --s;
- }
+ /* Handle the last character normally, for
+ simplicity. */
+ --s;
+
len = s - from;
+
if (len > (toend - to) - 1)
len = (toend - to) - 1;
+
if (len > 0)
{
PUT (ch);
case 2: *to++ = *from++;
case 1: *to++ = *from++;
}
- }
+ }
ch = GET ();
}
}
/* Some relatively `normal' character. */
if (state == 0)
{
- state = 11; /* Now seeing label definition */
+ if (IS_SYMBOL_COMPONENT (ch))
+ state = 11; /* Now seeing label definition. */
}
else if (state == 1)
{
- state = 2; /* Ditto */
+ if (IS_SYMBOL_COMPONENT (ch))
+ state = 2; /* Ditto. */
}
else if (state == 9)
{
- if (lex[ch] != LEX_IS_SYMBOL_COMPONENT)
+ if (!IS_SYMBOL_COMPONENT (ch))
state = 3;
}
else if (state == 10)
return to - tostart;
}
-/* end of app.c */