-/* Copyright (C) 1987, 1990, 1991 Free Software Foundation, Inc.
-
- Modified by Allen Wirfs-Brock, Instantiations Inc 2/90
- */
/* This is the Assembler Pre-Processor
- Copyright (C) 1987 Free Software Foundation, Inc.
-
+ Copyright 1987, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+ 1999, 2000
+ Free Software Foundation, Inc.
+
This file is part of GAS, the GNU Assembler.
-
+
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
-
+
GAS is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
+
You should have received a copy of the GNU General Public License
- along with GAS; see the file COPYING. If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+ along with GAS; see the file COPYING. If not, write to the Free
+ Software Foundation, 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
+/* Modified by Allen Wirfs-Brock, Instantiations Inc 2/90 */
/* App, the assembler pre-processor. This pre-processor strips out excess
spaces, turns single-quoted characters into a decimal constant, and turns
- # <number> <filename> <garbage> into a .line <number>\n.app-file <filename> pair.
- This needs better error-handling.
- */
+ # <number> <filename> <garbage> into a .line <number>\n.file <filename>
+ pair. This needs better error-handling. */
#include <stdio.h>
-#include "as.h" /* For BAD_CASE() only */
+#include "as.h" /* For BAD_CASE() only */
-#if !defined(__STDC__) && !defined(const)
-#define const /* Nothing */
+#if (__STDC__ != 1)
+#ifndef const
+#define const /* empty */
+#endif
#endif
-static char lex [256];
-static char symbol_chars[] =
- "$._ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789";
+#ifdef TC_M68K
+/* Whether we are scrubbing in m68k MRI mode. This is different from
+ flag_m68k_mri, because the two flags will be affected by the .mri
+ pseudo-op at different times. */
+static int scrub_m68k_mri;
+#else
+#define scrub_m68k_mri 0
+#endif
+
+/* The pseudo-op which switches in and out of MRI mode. See the
+ comment in do_scrub_chars. */
+static const char mri_pseudo[] = ".mri 0";
-/* These will go in BSS if not defined elsewhere, producing empty strings. */
-extern const char comment_chars[];
-extern const char line_comment_chars[];
-extern const char line_separator_chars[];
+#if defined TC_ARM && defined OBJ_ELF
+/* The pseudo-op for which we need to special-case `@' characters.
+ See the comment in do_scrub_chars. */
+static const char symver_pseudo[] = ".symver";
+static const char * symver_state;
+#endif
+
+static char lex[256];
+static const char symbol_chars[] =
+"$._ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789";
#define LEX_IS_SYMBOL_COMPONENT 1
#define LEX_IS_WHITESPACE 2
#define LEX_IS_COMMENT_START 4
#define LEX_IS_LINE_COMMENT_START 5
#define LEX_IS_TWOCHAR_COMMENT_1ST 6
-#define LEX_IS_TWOCHAR_COMMENT_2ND 7
#define LEX_IS_STRINGQUOTE 8
#define LEX_IS_COLON 9
#define LEX_IS_NEWLINE 10
#define LEX_IS_ONECHAR_QUOTE 11
+#ifdef TC_V850
+#define LEX_IS_DOUBLEDASH_1ST 12
+#endif
+#ifdef TC_M32R
+#define DOUBLEBAR_PARALLEL
+#endif
+#ifdef DOUBLEBAR_PARALLEL
+#define LEX_IS_DOUBLEBAR_1ST 13
+#endif
#define IS_SYMBOL_COMPONENT(c) (lex[c] == LEX_IS_SYMBOL_COMPONENT)
#define IS_WHITESPACE(c) (lex[c] == LEX_IS_WHITESPACE)
#define IS_LINE_SEPARATOR(c) (lex[c] == LEX_IS_LINE_SEPARATOR)
#define IS_LINE_COMMENT(c) (lex[c] == LEX_IS_LINE_COMMENT_START)
#define IS_NEWLINE(c) (lex[c] == LEX_IS_NEWLINE)
+static int process_escape PARAMS ((int));
+
/* FIXME-soon: The entire lexer/parser thingy should be
built statically at compile time rather than dynamically
- each and every time the assembler is run. xoxorich. */
-
-void do_scrub_begin() {
- const char *p;
-
- lex[' '] = LEX_IS_WHITESPACE;
- lex['\t'] = LEX_IS_WHITESPACE;
- lex['\n'] = LEX_IS_NEWLINE;
- lex[';'] = LEX_IS_LINE_SEPARATOR;
- lex['"'] = LEX_IS_STRINGQUOTE;
- lex['\''] = LEX_IS_ONECHAR_QUOTE;
- lex[':'] = LEX_IS_COLON;
-
- /* Note that these override the previous defaults, e.g. if ';'
- is a comment char, then it isn't a line separator. */
- for (p = symbol_chars; *p; ++p) {
- lex[*p] = LEX_IS_SYMBOL_COMPONENT;
- } /* declare symbol characters */
-
- for (p = line_comment_chars; *p; p++) {
- lex[*p] = LEX_IS_LINE_COMMENT_START;
- } /* declare line comment chars */
-
- for (p = comment_chars; *p; p++) {
- lex[*p] = LEX_IS_COMMENT_START;
- } /* declare comment chars */
-
- for (p = line_separator_chars; *p; p++) {
- lex[*p] = LEX_IS_LINE_SEPARATOR;
- } /* declare line separators */
-
- /* Only allow slash-star comments if slash is not in use */
- if (lex['/'] == 0) {
- lex['/'] = LEX_IS_TWOCHAR_COMMENT_1ST;
- }
- /* FIXME-soon. This is a bad hack but otherwise, we
- can't do c-style comments when '/' is a line
- comment char. xoxorich. */
- if (lex['*'] == 0) {
- lex['*'] = LEX_IS_TWOCHAR_COMMENT_2ND;
- }
-} /* do_scrub_begin() */
+ each and every time the assembler is run. xoxorich. */
-FILE *scrub_file;
+void
+do_scrub_begin (m68k_mri)
+ int m68k_mri ATTRIBUTE_UNUSED;
+{
+ const char *p;
+ int c;
-int scrub_from_file() {
- return getc(scrub_file);
-}
+ lex[' '] = LEX_IS_WHITESPACE;
+ lex['\t'] = LEX_IS_WHITESPACE;
+ lex['\r'] = LEX_IS_WHITESPACE;
+ lex['\n'] = LEX_IS_NEWLINE;
+ lex[':'] = LEX_IS_COLON;
-void scrub_to_file(ch)
-int ch;
-{
- ungetc(ch,scrub_file);
-} /* scrub_to_file() */
+#ifdef TC_M68K
+ scrub_m68k_mri = m68k_mri;
-char *scrub_string;
-char *scrub_last_string;
+ if (! m68k_mri)
+#endif
+ {
+ lex['"'] = LEX_IS_STRINGQUOTE;
-int scrub_from_string() {
- return scrub_string == scrub_last_string ? EOF : *scrub_string++;
-} /* scrub_from_string() */
+#if ! defined (TC_HPPA) && ! defined (TC_I370)
+ /* I370 uses single-quotes to delimit integer, float constants */
+ lex['\''] = LEX_IS_ONECHAR_QUOTE;
+#endif
-void scrub_to_string(ch)
-int ch;
-{
- *--scrub_string=ch;
-} /* scrub_to_string() */
+#ifdef SINGLE_QUOTE_STRINGS
+ lex['\''] = LEX_IS_STRINGQUOTE;
+#endif
+ }
+
+ /* Note: if any other character can be LEX_IS_STRINGQUOTE, the loop
+ in state 5 of do_scrub_chars must be changed. */
+
+ /* Note that these override the previous defaults, e.g. if ';' is a
+ comment char, then it isn't a line separator. */
+ for (p = symbol_chars; *p; ++p)
+ {
+ lex[(unsigned char) *p] = LEX_IS_SYMBOL_COMPONENT;
+ } /* declare symbol characters */
+
+ for (c = 128; c < 256; ++c)
+ lex[c] = LEX_IS_SYMBOL_COMPONENT;
+
+#ifdef tc_symbol_chars
+ /* This macro permits the processor to specify all characters which
+ may appears in an operand. This will prevent the scrubber from
+ discarding meaningful whitespace in certain cases. The i386
+ backend uses this to support prefixes, which can confuse the
+ scrubber as to whether it is parsing operands or opcodes. */
+ for (p = tc_symbol_chars; *p; ++p)
+ lex[(unsigned char) *p] = LEX_IS_SYMBOL_COMPONENT;
+#endif
+
+ /* The m68k backend wants to be able to change comment_chars. */
+#ifndef tc_comment_chars
+#define tc_comment_chars comment_chars
+#endif
+ for (p = tc_comment_chars; *p; p++)
+ {
+ lex[(unsigned char) *p] = LEX_IS_COMMENT_START;
+ } /* declare comment chars */
+
+ for (p = line_comment_chars; *p; p++)
+ {
+ lex[(unsigned char) *p] = LEX_IS_LINE_COMMENT_START;
+ } /* declare line comment chars */
+
+ for (p = line_separator_chars; *p; p++)
+ {
+ lex[(unsigned char) *p] = LEX_IS_LINE_SEPARATOR;
+ } /* declare line separators */
+
+ /* Only allow slash-star comments if slash is not in use.
+ FIXME: This isn't right. We should always permit them. */
+ if (lex['/'] == 0)
+ {
+ lex['/'] = LEX_IS_TWOCHAR_COMMENT_1ST;
+ }
+
+#ifdef TC_M68K
+ if (m68k_mri)
+ {
+ lex['\''] = LEX_IS_STRINGQUOTE;
+ lex[';'] = LEX_IS_COMMENT_START;
+ lex['*'] = LEX_IS_LINE_COMMENT_START;
+ /* The MRI documentation says '!' is LEX_IS_COMMENT_START, but
+ then it can't be used in an expression. */
+ lex['!'] = LEX_IS_LINE_COMMENT_START;
+ }
+#endif
+
+#ifdef TC_V850
+ lex['-'] = LEX_IS_DOUBLEDASH_1ST;
+#endif
+#ifdef DOUBLEBAR_PARALLEL
+ lex['|'] = LEX_IS_DOUBLEBAR_1ST;
+#endif
+#ifdef TC_D30V
+ /* must do this is we want VLIW instruction with "->" or "<-" */
+ lex['-'] = LEX_IS_SYMBOL_COMPONENT;
+#endif
+} /* do_scrub_begin() */
/* Saved state of the scrubber */
static int state;
static int old_state;
static char *out_string;
static char out_buf[20];
-static int add_newlines = 0;
+static int add_newlines;
+static char *saved_input;
+static int saved_input_len;
+static char input_buffer[32 * 1024];
+static const char *mri_state;
+static char mri_last_ch;
/* Data structure for saving the state of app across #include's. Note that
app is called asynchronously to the parsing of the .include's, so our
That's why we have to save it all. */
struct app_save {
- int state;
- int old_state;
- char *out_string;
- char out_buf[sizeof (out_buf)];
- int add_newlines;
- char *scrub_string;
- char *scrub_last_string;
- FILE *scrub_file;
+ int state;
+ int old_state;
+ char * out_string;
+ char out_buf[sizeof (out_buf)];
+ int add_newlines;
+ char * saved_input;
+ int saved_input_len;
+#ifdef TC_M68K
+ int scrub_m68k_mri;
+#endif
+ const char * mri_state;
+ char mri_last_ch;
+#if defined TC_ARM && defined OBJ_ELF
+ const char * symver_state;
+#endif
};
-char *app_push() {
- register struct app_save *saved;
-
- saved = (struct app_save *) xmalloc(sizeof (*saved));
- saved->state = state;
- saved->old_state = old_state;
- saved->out_string = out_string;
- bcopy(saved->out_buf, out_buf, sizeof(out_buf));
- saved->add_newlines = add_newlines;
- saved->scrub_string = scrub_string;
- saved->scrub_last_string = scrub_last_string;
- saved->scrub_file = scrub_file;
-
- /* do_scrub_begin() is not useful, just wastes time. */
- return (char *)saved;
+char *
+app_push ()
+{
+ register struct app_save *saved;
+
+ saved = (struct app_save *) xmalloc (sizeof (*saved));
+ saved->state = state;
+ saved->old_state = old_state;
+ saved->out_string = out_string;
+ memcpy (saved->out_buf, out_buf, sizeof (out_buf));
+ saved->add_newlines = add_newlines;
+ if (saved_input == NULL)
+ saved->saved_input = NULL;
+ else
+ {
+ saved->saved_input = xmalloc (saved_input_len);
+ memcpy (saved->saved_input, saved_input, saved_input_len);
+ saved->saved_input_len = saved_input_len;
+ }
+#ifdef TC_M68K
+ saved->scrub_m68k_mri = scrub_m68k_mri;
+#endif
+ saved->mri_state = mri_state;
+ saved->mri_last_ch = mri_last_ch;
+#if defined TC_ARM && defined OBJ_ELF
+ saved->symver_state = symver_state;
+#endif
+
+ /* do_scrub_begin() is not useful, just wastes time. */
+
+ state = 0;
+ saved_input = NULL;
+
+ return (char *) saved;
}
-void app_pop(arg)
-char *arg;
+void
+app_pop (arg)
+ char *arg;
{
- register struct app_save *saved = (struct app_save *)arg;
-
- /* There is no do_scrub_end (). */
- state = saved->state;
- old_state = saved->old_state;
- out_string = saved->out_string;
- bcopy (out_buf, saved->out_buf, sizeof (out_buf));
- add_newlines = saved->add_newlines;
- scrub_string = saved->scrub_string;
- scrub_last_string = saved->scrub_last_string;
- scrub_file = saved->scrub_file;
-
- free (arg);
-} /* app_pop() */
-
-int do_scrub_next_char(get,unget)
-int (*get)();
-void (*unget)();
+ register struct app_save *saved = (struct app_save *) arg;
+
+ /* There is no do_scrub_end (). */
+ state = saved->state;
+ old_state = saved->old_state;
+ out_string = saved->out_string;
+ memcpy (out_buf, saved->out_buf, sizeof (out_buf));
+ add_newlines = saved->add_newlines;
+ if (saved->saved_input == NULL)
+ saved_input = NULL;
+ else
+ {
+ assert (saved->saved_input_len <= (int) (sizeof input_buffer));
+ memcpy (input_buffer, saved->saved_input, saved->saved_input_len);
+ saved_input = input_buffer;
+ saved_input_len = saved->saved_input_len;
+ free (saved->saved_input);
+ }
+#ifdef TC_M68K
+ scrub_m68k_mri = saved->scrub_m68k_mri;
+#endif
+ mri_state = saved->mri_state;
+ mri_last_ch = saved->mri_last_ch;
+#if defined TC_ARM && defined OBJ_ELF
+ symver_state = saved->symver_state;
+#endif
+
+ free (arg);
+} /* app_pop() */
+
+/* @@ This assumes that \n &c are the same on host and target. This is not
+ necessarily true. */
+static int
+process_escape (ch)
+ int ch;
+{
+ switch (ch)
+ {
+ case 'b':
+ return '\b';
+ case 'f':
+ return '\f';
+ case 'n':
+ return '\n';
+ case 'r':
+ return '\r';
+ case 't':
+ return '\t';
+ case '\'':
+ return '\'';
+ case '"':
+ return '\"';
+ default:
+ return ch;
+ }
+}
+
+/* This function is called to process input characters. The GET
+ parameter is used to retrieve more input characters. GET should
+ set its parameter to point to a buffer, and return the length of
+ the buffer; it should return 0 at end of file. The scrubbed output
+ characters are put into the buffer starting at TOSTART; the TOSTART
+ buffer is TOLEN bytes in length. The function returns the number
+ of scrubbed characters put into TOSTART. This will be TOLEN unless
+ end of file was seen. This function is arranged as a state
+ machine, and saves its state so that it may return at any point.
+ This is the way the old code used to work. */
+
+int
+do_scrub_chars (get, tostart, tolen)
+ int (*get) PARAMS ((char *, int));
+ char *tostart;
+ int tolen;
{
- /*State 0: beginning of normal line
+ char *to = tostart;
+ char *toend = tostart + tolen;
+ char *from;
+ char *fromend;
+ int fromlen;
+ register int ch, ch2 = 0;
+
+ /*State 0: beginning of normal line
1: After first whitespace on line (flush more white)
2: After first non-white (opcode) on line (keep 1white)
3: after second white on line (into operands) (flush white)
4: after putting out a .line, put out digits
5: parsing a string, then go to old-state
6: putting out \ escape in a "d string.
- 7: After putting out a .app-file, put out string.
- 8: After putting out a .app-file string, flush until newline.
- -1: output string in out_string and go to the state in old_state
- -2: flush text until a '*' '/' is seen, then go to state old_state
+ 7: After putting out a .appfile, put out string.
+ 8: After putting out a .appfile string, flush until newline.
+ 9: After seeing symbol char in state 3 (keep 1white after symchar)
+ 10: After seeing whitespace in state 9 (keep white before symchar)
+ 11: After seeing a symbol character in state 0 (eg a label definition)
+ -1: output string in out_string and go to the state in old_state
+ -2: flush text until a '*' '/' is seen, then go to state old_state
+#ifdef TC_V850
+ 12: After seeing a dash, looking for a second dash as a start of comment.
+#endif
+#ifdef DOUBLEBAR_PARALLEL
+ 13: After seeing a vertical bar, looking for a second vertical bar as a parallel expression seperator.
+#endif
*/
-
- register int ch, ch2 = 0;
-
- switch (state) {
- case -1:
- ch= *out_string++;
- if(*out_string==0) {
- state=old_state;
- old_state=3;
- }
- return ch;
-
+
+ /* I added states 9 and 10 because the MIPS ECOFF assembler uses
+ constructs like ``.loc 1 20''. This was turning into ``.loc
+ 120''. States 9 and 10 ensure that a space is never dropped in
+ between characters which could appear in a identifier. Ian
+ Taylor, ian@cygnus.com.
+
+ I added state 11 so that something like "Lfoo add %r25,%r26,%r27" works
+ correctly on the PA (and any other target where colons are optional).
+ Jeff Law, law@cs.utah.edu.
+
+ I added state 13 so that something like "cmp r1, r2 || trap #1" does not
+ get squashed into "cmp r1,r2||trap#1", with the all important space
+ between the 'trap' and the '#1' being eliminated. nickc@cygnus.com */
+
+ /* This macro gets the next input character. */
+
+#define GET() \
+ (from < fromend \
+ ? * (unsigned char *) (from++) \
+ : (saved_input = NULL, \
+ fromlen = (*get) (input_buffer, sizeof input_buffer), \
+ from = input_buffer, \
+ fromend = from + fromlen, \
+ (fromlen == 0 \
+ ? EOF \
+ : * (unsigned char *) (from++))))
+
+ /* This macro pushes a character back on the input stream. */
+
+#define UNGET(uch) (*--from = (uch))
+
+ /* This macro puts a character into the output buffer. If this
+ character fills the output buffer, this macro jumps to the label
+ TOFULL. We use this rather ugly approach because we need to
+ handle two different termination conditions: EOF on the input
+ stream, and a full output buffer. It would be simpler if we
+ always read in the entire input stream before processing it, but
+ I don't want to make such a significant change to the assembler's
+ memory usage. */
+
+#define PUT(pch) \
+ do \
+ { \
+ *to++ = (pch); \
+ if (to >= toend) \
+ goto tofull; \
+ } \
+ while (0)
+
+ if (saved_input != NULL)
+ {
+ from = saved_input;
+ fromend = from + saved_input_len;
+ }
+ else
+ {
+ fromlen = (*get) (input_buffer, sizeof input_buffer);
+ if (fromlen == 0)
+ return 0;
+ from = input_buffer;
+ fromend = from + fromlen;
+ }
+
+ while (1)
+ {
+ /* The cases in this switch end with continue, in order to
+ branch back to the top of this while loop and generate the
+ next output character in the appropriate state. */
+ switch (state)
+ {
+ case -1:
+ ch = *out_string++;
+ if (*out_string == '\0')
+ {
+ state = old_state;
+ old_state = 3;
+ }
+ PUT (ch);
+ continue;
+
case -2:
- for(;;) {
- do {
- ch=(*get)();
- } while(ch!=EOF && ch!='\n' && ch!='*');
- if(ch=='\n' || ch==EOF)
- return ch;
-
- /* At this point, ch must be a '*' */
- while ( (ch=(*get)()) == '*' ){
- ;
- }
- if(ch==EOF || ch=='/')
- break;
- (*unget)(ch);
+ for (;;)
+ {
+ do
+ {
+ ch = GET ();
+
+ if (ch == EOF)
+ {
+ as_warn (_("end of file in comment"));
+ goto fromeof;
+ }
+
+ if (ch == '\n')
+ PUT ('\n');
+ }
+ while (ch != '*');
+
+ while ((ch = GET ()) == '*')
+ ;
+
+ if (ch == EOF)
+ {
+ as_warn (_("end of file in comment"));
+ goto fromeof;
}
- state=old_state;
- return ' ';
-
+
+ if (ch == '/')
+ break;
+
+ UNGET (ch);
+ }
+
+ state = old_state;
+ UNGET (' ');
+ continue;
+
case 4:
- ch=(*get)();
- if(ch==EOF || (ch>='0' && ch<='9'))
- return ch;
- else {
- while(ch!=EOF && IS_WHITESPACE(ch))
- ch=(*get)();
- if(ch=='"') {
- (*unget)(ch);
- out_string="\n.app-file ";
- old_state=7;
- state= -1;
- return *out_string++;
- } else {
- while(ch!=EOF && ch!='\n')
- ch=(*get)();
- return ch;
- }
+ ch = GET ();
+ if (ch == EOF)
+ goto fromeof;
+ else if (ch >= '0' && ch <= '9')
+ PUT (ch);
+ else
+ {
+ while (ch != EOF && IS_WHITESPACE (ch))
+ ch = GET ();
+ if (ch == '"')
+ {
+ UNGET (ch);
+ if (scrub_m68k_mri)
+ out_string = "\n\tappfile ";
+ else
+ out_string = "\n\t.appfile ";
+ old_state = 7;
+ state = -1;
+ PUT (*out_string++);
}
-
- case 5:
- ch=(*get)();
- if(ch=='"') {
- state=old_state;
- return '"';
- } else if(ch=='\\') {
- state=6;
- return ch;
- } else if(ch==EOF) {
- as_warn("End of file in string: inserted '\"'");
- state=old_state;
- (*unget)('\n');
- return '"';
- } else {
- return ch;
+ else
+ {
+ while (ch != EOF && ch != '\n')
+ ch = GET ();
+ state = 0;
+ PUT (ch);
}
-
+ }
+ continue;
+
+ case 5:
+ /* We are going to copy everything up to a quote character,
+ with special handling for a backslash. We try to
+ optimize the copying in the simple case without using the
+ GET and PUT macros. */
+ {
+ char *s;
+ int len;
+
+ for (s = from; s < fromend; s++)
+ {
+ ch = *s;
+ /* This condition must be changed if the type of any
+ other character can be LEX_IS_STRINGQUOTE. */
+ if (ch == '\\'
+ || ch == '"'
+ || ch == '\''
+ || ch == '\n')
+ break;
+ }
+ len = s - from;
+ if (len > toend - to)
+ len = toend - to;
+ if (len > 0)
+ {
+ memcpy (to, from, len);
+ to += len;
+ from += len;
+ }
+ }
+
+ ch = GET ();
+ if (ch == EOF)
+ {
+ as_warn (_("end of file in string: inserted '\"'"));
+ state = old_state;
+ UNGET ('\n');
+ PUT ('"');
+ }
+ else if (lex[ch] == LEX_IS_STRINGQUOTE)
+ {
+ state = old_state;
+ PUT (ch);
+ }
+#ifndef NO_STRING_ESCAPES
+ else if (ch == '\\')
+ {
+ state = 6;
+ PUT (ch);
+ }
+#endif
+ else if (scrub_m68k_mri && ch == '\n')
+ {
+ /* Just quietly terminate the string. This permits lines like
+ bne label loop if we haven't reach end yet
+ */
+ state = old_state;
+ UNGET (ch);
+ PUT ('\'');
+ }
+ else
+ {
+ PUT (ch);
+ }
+ continue;
+
case 6:
- state=5;
- ch=(*get)();
- switch(ch) {
- /* This is neet. Turn "string
- more string" into "string\n more string"
- */
- case '\n':
- (*unget)('n');
- add_newlines++;
- return '\\';
-
- case '"':
- case '\\':
- case 'b':
- case 'f':
- case 'n':
- case 'r':
- case 't':
-#ifdef BACKSLASH_V
- case 'v':
-#endif /* BACKSLASH_V */
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
- break;
-
-#ifdef ONLY_STANDARD_ESCAPES
- default:
- as_warn("Unknown escape '\\%c' in string: Ignored",ch);
- break;
-#else /* ONLY_STANDARD_ESCAPES */
- default:
- /* Accept \x as x for any x */
- break;
+ state = 5;
+ ch = GET ();
+ switch (ch)
+ {
+ /* Handle strings broken across lines, by turning '\n' into
+ '\\' and 'n'. */
+ case '\n':
+ UNGET ('n');
+ add_newlines++;
+ PUT ('\\');
+ continue;
+
+ case '"':
+ case '\\':
+ case 'b':
+ case 'f':
+ case 'n':
+ case 'r':
+ case 't':
+ case 'v':
+ case 'x':
+ case 'X':
+ case '0':
+ case '1':
+ case '2':
+ case '3':
+ case '4':
+ case '5':
+ case '6':
+ case '7':
+ break;
+#if defined(IGNORE_NONSTANDARD_ESCAPES) | defined(ONLY_STANDARD_ESCAPES)
+ default:
+ as_warn (_("Unknown escape '\\%c' in string: Ignored"), ch);
+ break;
+#else /* ONLY_STANDARD_ESCAPES */
+ default:
+ /* Accept \x as x for any x */
+ break;
#endif /* ONLY_STANDARD_ESCAPES */
-
- case EOF:
- as_warn("End of file in string: '\"' inserted");
- return '"';
- }
- return ch;
-
+
+ case EOF:
+ as_warn (_("End of file in string: '\"' inserted"));
+ PUT ('"');
+ continue;
+ }
+ PUT (ch);
+ continue;
+
case 7:
- ch=(*get)();
- state=5;
- old_state=8;
- return ch;
-
+ ch = GET ();
+ state = 5;
+ old_state = 8;
+ if (ch == EOF)
+ goto fromeof;
+ PUT (ch);
+ continue;
+
case 8:
- do ch= (*get)();
- while(ch!='\n');
- state=0;
- return ch;
+ do
+ ch = GET ();
+ while (ch != '\n' && ch != EOF);
+ if (ch == EOF)
+ goto fromeof;
+ state = 0;
+ PUT (ch);
+ continue;
}
-
- /* OK, we are somewhere in states 0 through 4 */
-
- /* flushchar: */
- ch=(*get)();
- recycle:
- if (ch == EOF) {
- if (state != 0)
- as_warn("End of file not at end of a line: Newline inserted.");
- return ch;
+
+ /* OK, we are somewhere in states 0 through 4 or 9 through 11 */
+
+ /* flushchar: */
+ ch = GET ();
+
+ recycle:
+
+#if defined TC_ARM && defined OBJ_ELF
+ /* We need to watch out for .symver directives. See the comment later
+ in this function. */
+ if (symver_state == NULL)
+ {
+ if ((state == 0 || state == 1) && ch == symver_pseudo[0])
+ symver_state = symver_pseudo + 1;
+ }
+ else
+ {
+ /* We advance to the next state if we find the right
+ character. */
+ if (ch != '\0' && (*symver_state == ch))
+ ++symver_state;
+ else if (*symver_state != '\0')
+ /* We did not get the expected character, or we didn't
+ get a valid terminating character after seeing the
+ entire pseudo-op, so we must go back to the beginning. */
+ symver_state = NULL;
+ else
+ {
+ /* We've read the entire pseudo-op. If this is the end
+ of the line, go back to the beginning. */
+ if (IS_NEWLINE (ch))
+ symver_state = NULL;
+ }
+ }
+#endif /* TC_ARM && OBJ_ELF */
+
+#ifdef TC_M68K
+ /* We want to have pseudo-ops which control whether we are in
+ MRI mode or not. Unfortunately, since m68k MRI mode affects
+ the scrubber, that means that we need a special purpose
+ recognizer here. */
+ if (mri_state == NULL)
+ {
+ if ((state == 0 || state == 1)
+ && ch == mri_pseudo[0])
+ mri_state = mri_pseudo + 1;
+ }
+ else
+ {
+ /* We advance to the next state if we find the right
+ character, or if we need a space character and we get any
+ whitespace character, or if we need a '0' and we get a
+ '1' (this is so that we only need one state to handle
+ ``.mri 0'' and ``.mri 1''). */
+ if (ch != '\0'
+ && (*mri_state == ch
+ || (*mri_state == ' '
+ && lex[ch] == LEX_IS_WHITESPACE)
+ || (*mri_state == '0'
+ && ch == '1')))
+ {
+ mri_last_ch = ch;
+ ++mri_state;
+ }
+ else if (*mri_state != '\0'
+ || (lex[ch] != LEX_IS_WHITESPACE
+ && lex[ch] != LEX_IS_NEWLINE))
+ {
+ /* We did not get the expected character, or we didn't
+ get a valid terminating character after seeing the
+ entire pseudo-op, so we must go back to the
+ beginning. */
+ mri_state = NULL;
+ }
+ else
+ {
+ /* We've read the entire pseudo-op. mips_last_ch is
+ either '0' or '1' indicating whether to enter or
+ leave MRI mode. */
+ do_scrub_begin (mri_last_ch == '1');
+ mri_state = NULL;
+
+ /* We continue handling the character as usual. The
+ main gas reader must also handle the .mri pseudo-op
+ to control expression parsing and the like. */
+ }
+ }
+#endif
+
+ if (ch == EOF)
+ {
+ if (state != 0)
+ {
+ as_warn (_("end of file not at end of a line; newline inserted"));
+ state = 0;
+ PUT ('\n');
+ }
+ goto fromeof;
}
-
- switch (lex[ch]) {
+
+ switch (lex[ch])
+ {
case LEX_IS_WHITESPACE:
- do ch=(*get)();
- while(ch!=EOF && IS_WHITESPACE(ch));
- if(ch==EOF)
- return ch;
- if(IS_COMMENT(ch) || (state==0 && IS_LINE_COMMENT(ch)) || ch=='/' || IS_LINE_SEPARATOR(ch)) {
- goto recycle;
+ do
+ {
+ ch = GET ();
+ }
+ while (ch != EOF && IS_WHITESPACE (ch));
+ if (ch == EOF)
+ goto fromeof;
+
+ if (state == 0)
+ {
+ /* Preserve a single whitespace character at the
+ beginning of a line. */
+ state = 1;
+ UNGET (ch);
+ PUT (' ');
+ break;
+ }
+
+#ifdef KEEP_WHITE_AROUND_COLON
+ if (lex[ch] == LEX_IS_COLON)
+ {
+ /* Only keep this white if there's no white *after* the
+ colon. */
+ ch2 = GET ();
+ UNGET (ch2);
+ if (!IS_WHITESPACE (ch2))
+ {
+ state = 9;
+ UNGET (ch);
+ PUT (' ');
+ break;
}
- switch (state) {
- case 0: state++; goto recycle; /* Punted leading sp */
- case 1: BAD_CASE(state); /* We can't get here */
- case 2: state++; (*unget)(ch); return ' '; /* Sp after opco */
- case 3: goto recycle; /* Sp in operands */
- default: BAD_CASE(state);
+ }
+#endif
+ if (IS_COMMENT (ch)
+ || ch == '/'
+ || IS_LINE_SEPARATOR (ch))
+ {
+ if (scrub_m68k_mri)
+ {
+ /* In MRI mode, we keep these spaces. */
+ UNGET (ch);
+ PUT (' ');
+ break;
}
- break;
-
+ goto recycle;
+ }
+
+ /* If we're in state 2 or 11, we've seen a non-white
+ character followed by whitespace. If the next character
+ is ':', this is whitespace after a label name which we
+ normally must ignore. In MRI mode, though, spaces are
+ not permitted between the label and the colon. */
+ if ((state == 2 || state == 11)
+ && lex[ch] == LEX_IS_COLON
+ && ! scrub_m68k_mri)
+ {
+ state = 1;
+ PUT (ch);
+ break;
+ }
+
+ switch (state)
+ {
+ case 0:
+ state++;
+ goto recycle; /* Punted leading sp */
+ case 1:
+ /* We can arrive here if we leave a leading whitespace
+ character at the beginning of a line. */
+ goto recycle;
+ case 2:
+ state = 3;
+ if (to + 1 < toend)
+ {
+ /* Optimize common case by skipping UNGET/GET. */
+ PUT (' '); /* Sp after opco */
+ goto recycle;
+ }
+ UNGET (ch);
+ PUT (' ');
+ break;
+ case 3:
+ if (scrub_m68k_mri)
+ {
+ /* In MRI mode, we keep these spaces. */
+ UNGET (ch);
+ PUT (' ');
+ break;
+ }
+ goto recycle; /* Sp in operands */
+ case 9:
+ case 10:
+ if (scrub_m68k_mri)
+ {
+ /* In MRI mode, we keep these spaces. */
+ state = 3;
+ UNGET (ch);
+ PUT (' ');
+ break;
+ }
+ state = 10; /* Sp after symbol char */
+ goto recycle;
+ case 11:
+ if (LABELS_WITHOUT_COLONS || flag_m68k_mri)
+ state = 1;
+ else
+ {
+ /* We know that ch is not ':', since we tested that
+ case above. Therefore this is not a label, so it
+ must be the opcode, and we've just seen the
+ whitespace after it. */
+ state = 3;
+ }
+ UNGET (ch);
+ PUT (' '); /* Sp after label definition. */
+ break;
+ default:
+ BAD_CASE (state);
+ }
+ break;
+
case LEX_IS_TWOCHAR_COMMENT_1ST:
- ch2=(*get)();
- if (ch2 != EOF && lex[ch2] == LEX_IS_TWOCHAR_COMMENT_2ND) {
- for(;;) {
- do {
- ch2=(*get)();
- if(ch2 != EOF && IS_NEWLINE(ch2))
- add_newlines++;
- } while(ch2!=EOF &&
- (lex[ch2] != LEX_IS_TWOCHAR_COMMENT_2ND));
-
- while (ch2!=EOF &&
- (lex[ch2] == LEX_IS_TWOCHAR_COMMENT_2ND)){
- ch2=(*get)();
- }
-
- if(ch2==EOF
- || lex[ch2] == LEX_IS_TWOCHAR_COMMENT_1ST)
- break;
- (*unget)(ch);
- }
- if(ch2==EOF)
- as_warn("End of file in multiline comment");
-
- ch = ' ';
- goto recycle;
- } else {
- if(ch2!=EOF)
- (*unget)(ch2);
- return ch;
+ ch2 = GET ();
+ if (ch2 == '*')
+ {
+ for (;;)
+ {
+ do
+ {
+ ch2 = GET ();
+ if (ch2 != EOF && IS_NEWLINE (ch2))
+ add_newlines++;
+ }
+ while (ch2 != EOF && ch2 != '*');
+
+ while (ch2 == '*')
+ ch2 = GET ();
+
+ if (ch2 == EOF || ch2 == '/')
+ break;
+
+ /* This UNGET will ensure that we count newlines
+ correctly. */
+ UNGET (ch2);
}
- break;
-
+
+ if (ch2 == EOF)
+ as_warn (_("end of file in multiline comment"));
+
+ ch = ' ';
+ goto recycle;
+ }
+#ifdef DOUBLESLASH_LINE_COMMENTS
+ else if (ch2 == '/')
+ {
+ do
+ {
+ ch = GET ();
+ }
+ while (ch != EOF && !IS_NEWLINE (ch));
+ if (ch == EOF)
+ as_warn ("end of file in comment; newline inserted");
+ state = 0;
+ PUT ('\n');
+ break;
+ }
+#endif
+ else
+ {
+ if (ch2 != EOF)
+ UNGET (ch2);
+ if (state == 9 || state == 10)
+ state = 3;
+ PUT (ch);
+ }
+ break;
+
case LEX_IS_STRINGQUOTE:
- old_state=state;
- state=5;
- return ch;
-
+ if (state == 10)
+ {
+ /* Preserve the whitespace in foo "bar" */
+ UNGET (ch);
+ state = 3;
+ PUT (' ');
+
+ /* PUT didn't jump out. We could just break, but we
+ know what will happen, so optimize a bit. */
+ ch = GET ();
+ old_state = 3;
+ }
+ else if (state == 9)
+ old_state = 3;
+ else
+ old_state = state;
+ state = 5;
+ PUT (ch);
+ break;
+
#ifndef IEEE_STYLE
case LEX_IS_ONECHAR_QUOTE:
- ch=(*get)();
- if(ch==EOF) {
- as_warn("End-of-file after a one-character quote; \000 inserted");
- ch=0;
+ if (state == 10)
+ {
+ /* Preserve the whitespace in foo 'b' */
+ UNGET (ch);
+ state = 3;
+ PUT (' ');
+ break;
+ }
+ ch = GET ();
+ if (ch == EOF)
+ {
+ as_warn (_("end of file after a one-character quote; \\0 inserted"));
+ ch = 0;
+ }
+ if (ch == '\\')
+ {
+ ch = GET ();
+ if (ch == EOF)
+ {
+ as_warn (_("end of file in escape character"));
+ ch = '\\';
}
- sprintf(out_buf,"%d", (int)(unsigned char)ch);
-
- /* None of these 'x constants for us. We want 'x'.
- */
- if ( (ch=(*get)()) != '\'' ) {
+ else
+ ch = process_escape (ch);
+ }
+ sprintf (out_buf, "%d", (int) (unsigned char) ch);
+
+ /* None of these 'x constants for us. We want 'x'. */
+ if ((ch = GET ()) != '\'')
+ {
#ifdef REQUIRE_CHAR_CLOSE_QUOTE
- as_warn("Missing close quote: (assumed)");
+ as_warn (_("Missing close quote: (assumed)"));
#else
- (*unget)(ch);
+ if (ch != EOF)
+ UNGET (ch);
#endif
- }
-
- old_state=state;
- state= -1;
- out_string=out_buf;
- return *out_string++;
+ }
+ if (strlen (out_buf) == 1)
+ {
+ PUT (out_buf[0]);
+ break;
+ }
+ if (state == 9)
+ old_state = 3;
+ else
+ old_state = state;
+ state = -1;
+ out_string = out_buf;
+ PUT (*out_string++);
+ break;
#endif
+
case LEX_IS_COLON:
- if(state!=3)
- state=0;
- return ch;
-
+#ifdef KEEP_WHITE_AROUND_COLON
+ state = 9;
+#else
+ if (state == 9 || state == 10)
+ state = 3;
+ else if (state != 3)
+ state = 1;
+#endif
+ PUT (ch);
+ break;
+
case LEX_IS_NEWLINE:
- /* Roll out a bunch of newlines from inside comments, etc. */
- if(add_newlines) {
- --add_newlines;
- (*unget)(ch);
- }
- /* fall thru into... */
-
+ /* Roll out a bunch of newlines from inside comments, etc. */
+ if (add_newlines)
+ {
+ --add_newlines;
+ UNGET (ch);
+ }
+ /* Fall through. */
+
case LEX_IS_LINE_SEPARATOR:
- state=0;
- return ch;
-
+ state = 0;
+ PUT (ch);
+ break;
+
+#ifdef TC_V850
+ case LEX_IS_DOUBLEDASH_1ST:
+ ch2 = GET ();
+ if (ch2 != '-')
+ {
+ UNGET (ch2);
+ goto de_fault;
+ }
+ /* Read and skip to end of line. */
+ do
+ {
+ ch = GET ();
+ }
+ while (ch != EOF && ch != '\n');
+ if (ch == EOF)
+ {
+ as_warn (_("end of file in comment; newline inserted"));
+ }
+ state = 0;
+ PUT ('\n');
+ break;
+#endif
+#ifdef DOUBLEBAR_PARALLEL
+ case LEX_IS_DOUBLEBAR_1ST:
+ ch2 = GET ();
+ if (ch2 != '|')
+ {
+ UNGET (ch2);
+ goto de_fault;
+ }
+ /* Reset back to state 1 and pretend that we are parsing a line from
+ just after the first white space. */
+ state = 1;
+ PUT ('|');
+ PUT ('|');
+ break;
+#endif
case LEX_IS_LINE_COMMENT_START:
- if (state != 0) /* Not at start of line, act normal */
- goto de_fault;
-
- /* FIXME-someday: The two character comment stuff was badly
- thought out. On i386, we want '/' as line comment start
- AND we want C style comments. hence this hack. The
- whole lexical process should be reworked. xoxorich. */
-
- if (ch == '/' && (ch2 = (*get)()) == '*') {
- state = -2;
- return(do_scrub_next_char(get, unget));
- } else {
- (*unget)(ch2);
- } /* bad hack */
-
- do ch=(*get)();
- while(ch!=EOF && IS_WHITESPACE(ch));
- if(ch==EOF) {
- as_warn("EOF in comment: Newline inserted");
- return '\n';
+ /* FIXME-someday: The two character comment stuff was badly
+ thought out. On i386, we want '/' as line comment start
+ AND we want C style comments. hence this hack. The
+ whole lexical process should be reworked. xoxorich. */
+ if (ch == '/')
+ {
+ ch2 = GET ();
+ if (ch2 == '*')
+ {
+ old_state = 3;
+ state = -2;
+ break;
+ }
+ else
+ {
+ UNGET (ch2);
+ }
+ } /* bad hack */
+
+ if (state == 0 || state == 1) /* Only comment at start of line. */
+ {
+ int startch;
+
+ startch = ch;
+
+ do
+ {
+ ch = GET ();
+ }
+ while (ch != EOF && IS_WHITESPACE (ch));
+ if (ch == EOF)
+ {
+ as_warn (_("end of file in comment; newline inserted"));
+ PUT ('\n');
+ break;
}
- if(ch<'0' || ch>'9') {
- /* Non-numerics: Eat whole comment line */
- while(ch!=EOF && !IS_NEWLINE(ch))
- ch=(*get)();
- if(ch==EOF)
- as_warn("EOF in Comment: Newline inserted");
- state=0;
- return '\n';
+ if (ch < '0' || ch > '9' || state != 0 || startch != '#')
+ {
+ /* Not a cpp line. */
+ while (ch != EOF && !IS_NEWLINE (ch))
+ ch = GET ();
+ if (ch == EOF)
+ as_warn (_("EOF in Comment: Newline inserted"));
+ state = 0;
+ PUT ('\n');
+ break;
}
- /* Numerics begin comment. Perhaps CPP `# 123 "filename"' */
- (*unget)(ch);
- old_state=4;
- state= -1;
- out_string=".line ";
- return *out_string++;
-
+ /* Looks like `# 123 "filename"' from cpp. */
+ UNGET (ch);
+ old_state = 4;
+ state = -1;
+ if (scrub_m68k_mri)
+ out_string = "\tappline ";
+ else
+ out_string = "\t.appline ";
+ PUT (*out_string++);
+ break;
+ }
+
+#ifdef TC_D10V
+ /* All insns end in a char for which LEX_IS_SYMBOL_COMPONENT is true.
+ Trap is the only short insn that has a first operand that is
+ neither register nor label.
+ We must prevent exef0f ||trap #1 to degenerate to exef0f ||trap#1 .
+ We can't make '#' LEX_IS_SYMBOL_COMPONENT because it is
+ already LEX_IS_LINE_COMMENT_START. However, it is the
+ only character in line_comment_chars for d10v, hence we
+ can recognize it as such. */
+ /* An alternative approach would be to reset the state to 1 when
+ we see '||', '<'- or '->', but that seems to be overkill. */
+ if (state == 10)
+ PUT (' ');
+#endif
+ /* We have a line comment character which is not at the
+ start of a line. If this is also a normal comment
+ character, fall through. Otherwise treat it as a default
+ character. */
+ if (strchr (tc_comment_chars, ch) == NULL
+ && (! scrub_m68k_mri
+ || (ch != '!' && ch != '*')))
+ goto de_fault;
+ if (scrub_m68k_mri
+ && (ch == '!' || ch == '*' || ch == '#')
+ && state != 1
+ && state != 10)
+ goto de_fault;
+ /* Fall through. */
case LEX_IS_COMMENT_START:
- do ch=(*get)();
- while(ch!=EOF && !IS_NEWLINE(ch));
- if(ch==EOF)
- as_warn("EOF in comment: Newline inserted");
- state=0;
- return '\n';
-
+#if defined TC_ARM && defined OBJ_ELF
+ /* On the ARM, `@' is the comment character.
+ Unfortunately this is also a special character in ELF .symver
+ directives (and .type, though we deal with those another way).
+ So we check if this line is such a directive, and treat
+ the character as default if so. This is a hack. */
+ if ((symver_state != NULL) && (*symver_state == 0))
+ goto de_fault;
+#endif
+#ifdef WARN_COMMENTS
+ if (!found_comment)
+ as_where (&found_comment_file, &found_comment);
+#endif
+ do
+ {
+ ch = GET ();
+ }
+ while (ch != EOF && !IS_NEWLINE (ch));
+ if (ch == EOF)
+ as_warn (_("end of file in comment; newline inserted"));
+ state = 0;
+ PUT ('\n');
+ break;
+
+ case LEX_IS_SYMBOL_COMPONENT:
+ if (state == 10)
+ {
+ /* This is a symbol character following another symbol
+ character, with whitespace in between. We skipped
+ the whitespace earlier, so output it now. */
+ UNGET (ch);
+ state = 3;
+ PUT (' ');
+ break;
+ }
+
+ if (state == 3)
+ state = 9;
+
+ /* This is a common case. Quickly copy CH and all the
+ following symbol component or normal characters. */
+ if (to + 1 < toend
+ && mri_state == NULL
+#if defined TC_ARM && defined OBJ_ELF
+ && symver_state == NULL
+#endif
+ )
+ {
+ char *s;
+ int len;
+
+ for (s = from; s < fromend; s++)
+ {
+ int type;
+
+ ch2 = *(unsigned char *) s;
+ type = lex[ch2];
+ if (type != 0
+ && type != LEX_IS_SYMBOL_COMPONENT)
+ break;
+ }
+ if (s > from)
+ {
+ /* Handle the last character normally, for
+ simplicity. */
+ --s;
+ }
+ len = s - from;
+ if (len > (toend - to) - 1)
+ len = (toend - to) - 1;
+ if (len > 0)
+ {
+ PUT (ch);
+ if (len > 8)
+ {
+ memcpy (to, from, len);
+ to += len;
+ from += len;
+ }
+ else
+ {
+ switch (len)
+ {
+ case 8: *to++ = *from++;
+ case 7: *to++ = *from++;
+ case 6: *to++ = *from++;
+ case 5: *to++ = *from++;
+ case 4: *to++ = *from++;
+ case 3: *to++ = *from++;
+ case 2: *to++ = *from++;
+ case 1: *to++ = *from++;
+ }
+ }
+ ch = GET ();
+ }
+ }
+
+ /* Fall through. */
default:
de_fault:
- /* Some relatively `normal' character. */
- if(state==0) {
- state=2; /* Now seeing opcode */
- return ch;
- } else if(state==1) {
- state=2; /* Ditto */
- return ch;
- } else {
- return ch; /* Opcode or operands already */
+ /* Some relatively `normal' character. */
+ if (state == 0)
+ {
+ state = 11; /* Now seeing label definition */
+ }
+ else if (state == 1)
+ {
+ state = 2; /* Ditto */
+ }
+ else if (state == 9)
+ {
+ if (lex[ch] != LEX_IS_SYMBOL_COMPONENT)
+ state = 3;
+ }
+ else if (state == 10)
+ {
+ if (ch == '\\')
+ {
+ /* Special handling for backslash: a backslash may
+ be the beginning of a formal parameter (of a
+ macro) following another symbol character, with
+ whitespace in between. If that is the case, we
+ output a space before the parameter. Strictly
+ speaking, correct handling depends upon what the
+ macro parameter expands into; if the parameter
+ expands into something which does not start with
+ an operand character, then we don't want to keep
+ the space. We don't have enough information to
+ make the right choice, so here we are making the
+ choice which is more likely to be correct. */
+ PUT (' ');
}
+
+ state = 3;
+ }
+ PUT (ch);
+ break;
}
- return -1;
-}
+ }
-#ifdef TEST
+ /*NOTREACHED*/
-char comment_chars[] = "|";
-char line_comment_chars[] = "#";
+ fromeof:
+ /* We have reached the end of the input. */
+ return to - tostart;
-main()
-{
- int ch;
-
- app_begin();
- while((ch=do_scrub_next_char(stdin))!=EOF)
- putc(ch,stdout);
-}
+ tofull:
+ /* The output buffer is full. Save any input we have not yet
+ processed. */
+ if (fromend > from)
+ {
+ saved_input = from;
+ saved_input_len = fromend - from;
+ }
+ else
+ saved_input = NULL;
-as_warn(str)
-char *str;
-{
- fputs(str,stderr);
- putc('\n',stderr);
+ return to - tostart;
}
-#endif
-
-/*
- * Local Variables:
- * comment-column: 0
- * fill-column: 131
- * End:
- */
/* end of app.c */
projects / deliverable / binutils-gdb.git / blobdiff