/* GAS interface for targets using CGEN: Cpu tools GENerator.
- Copyright (C) 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
+ Copyright 1996, 1997, 1998, 1999, 2000, 2001
+ Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to the Free Software
-Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include <setjmp.h>
#include "ansidecl.h"
#include "as.h"
#include "subsegs.h"
#include "cgen.h"
+#include "dwarf2dbg.h"
/* Opcode table descriptor, must be set by md_begin. */
void
cgen_asm_record_register (name, number)
- char * name;
+ char *name;
int number;
{
/* Use symbol_create here instead of symbol_new so we don't try to
output registers into the object file's symbol table. */
symbol_table_insert (symbol_create (name, reg_section,
- number, & zero_address_frag));
+ number, &zero_address_frag));
}
/* We need to keep a list of fixups. We can't simply generate them as
OPINDEX is the index in the operand table.
OPINFO is something the caller chooses to help in reloc determination. */
-struct fixup
-{
+struct fixup {
int opindex;
int opinfo;
expressionS exp;
};
-static struct fixup fixups [GAS_CGEN_MAX_FIXUPS];
+static struct fixup fixups[GAS_CGEN_MAX_FIXUPS];
static int num_fixups;
/* Prepare to parse an instruction.
/* We need to generate a fixup for this expression. */
if (num_fixups >= GAS_CGEN_MAX_FIXUPS)
as_fatal (_("too many fixups"));
- fixups[num_fixups].exp = * expP;
+ fixups[num_fixups].exp = *expP;
fixups[num_fixups].opindex = opindex;
fixups[num_fixups].opinfo = opinfo;
++ num_fixups;
}
-/* The following three functions allow a backup of the fixup chain to be made,
- and to have this backup be swapped with the current chain. This allows
- certain ports, eg the m32r, to swap two instructions and swap their fixups
- at the same time. */
-/* ??? I think with cgen_asm_finish_insn (or something else) there is no
- more need for this. */
+/* The following functions allow fixup chains to be stored, retrieved,
+ and swapped. They are a generalization of a pre-existing scheme
+ for storing, restoring and swapping fixup chains that was used by
+ the m32r port. The functionality is essentially the same, only
+ instead of only being able to store a single fixup chain, an entire
+ array of fixup chains can be stored. It is the user's responsibility
+ to keep track of how many fixup chains have been stored and which
+ elements of the array they are in.
+
+ The algorithms used are the same as in the old scheme. Other than the
+ "array-ness" of the whole thing, the functionality is identical to the
+ old scheme.
+
+ gas_cgen_initialize_saved_fixups_array():
+ Sets num_fixups_in_chain to 0 for each element. Call this from
+ md_begin() if you plan to use these functions and you want the
+ fixup count in each element to be set to 0 intially. This is
+ not necessary, but it's included just in case. It performs
+ the same function for each element in the array of fixup chains
+ that gas_init_parse() performs for the current fixups.
+
+ gas_cgen_save_fixups (element):
+ element - element number of the array you wish to store the fixups
+ to. No mechanism is built in for tracking what element
+ was last stored to.
+
+ gas_cgen_restore_fixups (element):
+ element - element number of the array you wish to restore the fixups
+ from.
+
+ gas_cgen_swap_fixups(int element):
+ element - swap the current fixups with those in this element number.
+*/
+
+struct saved_fixups {
+ struct fixup fixup_chain[GAS_CGEN_MAX_FIXUPS];
+ int num_fixups_in_chain;
+};
-static struct fixup saved_fixups [GAS_CGEN_MAX_FIXUPS];
-static int saved_num_fixups;
+static struct saved_fixups stored_fixups[MAX_SAVED_FIXUP_CHAINS];
-void
-gas_cgen_save_fixups ()
+void
+gas_cgen_initialize_saved_fixups_array ()
{
- saved_num_fixups = num_fixups;
-
- memcpy (saved_fixups, fixups, sizeof (fixups[0]) * num_fixups);
-
- num_fixups = 0;
+ int i = 0;
+ while (i < MAX_SAVED_FIXUP_CHAINS)
+ stored_fixups[i++].num_fixups_in_chain = 0;
}
-void
-gas_cgen_restore_fixups ()
+void
+gas_cgen_save_fixups (int i)
{
- num_fixups = saved_num_fixups;
-
- memcpy (fixups, saved_fixups, sizeof (fixups[0]) * num_fixups);
-
- saved_num_fixups = 0;
+ if (i < 0 || i >= MAX_SAVED_FIXUP_CHAINS)
+ {
+ as_fatal("index into stored_fixups[] out of bounds");
+ return;
+ }
+ stored_fixups[i].num_fixups_in_chain = num_fixups;
+ memcpy(stored_fixups[i].fixup_chain, fixups,
+ sizeof (fixups[0])*num_fixups);
+ num_fixups = 0;
}
-void
-gas_cgen_swap_fixups ()
+void
+gas_cgen_restore_fixups (int i)
{
- int tmp;
- struct fixup tmp_fixup;
+ if (i < 0 || i >= MAX_SAVED_FIXUP_CHAINS)
+ {
+ as_fatal("index into stored_fixups[] out of bounds");
+ return;
+ }
+ num_fixups = stored_fixups[i].num_fixups_in_chain;
+ memcpy(fixups,stored_fixups[i].fixup_chain,
+ (sizeof (stored_fixups[i].fixup_chain[0]))*num_fixups);
+ stored_fixups[i].num_fixups_in_chain = 0;
+}
- if (num_fixups == 0)
- {
- gas_cgen_restore_fixups ();
- }
- else if (saved_num_fixups == 0)
- {
- gas_cgen_save_fixups ();
- }
- else
- {
- tmp = saved_num_fixups;
- saved_num_fixups = num_fixups;
- num_fixups = tmp;
-
- for (tmp = GAS_CGEN_MAX_FIXUPS; tmp--;)
- {
- tmp_fixup = saved_fixups [tmp];
- saved_fixups [tmp] = fixups [tmp];
- fixups [tmp] = tmp_fixup;
- }
+void
+gas_cgen_swap_fixups (int i)
+{
+ int tmp;
+ struct fixup tmp_fixup;
+
+ if (i < 0 || i >= MAX_SAVED_FIXUP_CHAINS)
+ {
+ as_fatal("index into stored_fixups[] out of bounds");
+ return;
+ }
+
+ if (num_fixups == 0)
+ {
+ gas_cgen_restore_fixups (i);
+ }
+ else if (stored_fixups[i].num_fixups_in_chain == 0)
+ {
+ gas_cgen_save_fixups (i);
+ }
+ else
+ {
+ tmp = stored_fixups[i].num_fixups_in_chain;
+ stored_fixups[i].num_fixups_in_chain = num_fixups;
+ num_fixups = tmp;
+
+ for (tmp = GAS_CGEN_MAX_FIXUPS; tmp--;)
+ {
+ tmp_fixup = stored_fixups[i].fixup_chain [tmp];
+ stored_fixups[i].fixup_chain[tmp] = fixups [tmp];
+ fixups [tmp] = tmp_fixup;
+ }
}
}
symbolS * symbol;
offsetT offset;
{
- fixS * fixP;
+ fixS *fixP;
/* It may seem strange to use operand->attrs and not insn->attrs here,
but it is the operand that has a pc relative relocation. */
int opinfo;
expressionS * exp;
{
- fixS * fixP;
+ fixS *fixP;
/* It may seem strange to use operand->attrs and not insn->attrs here,
but it is the operand that has a pc relative relocation. */
gas_cgen_parse_operand (cd, want, strP, opindex, opinfo, resultP, valueP)
CGEN_CPU_DESC cd ATTRIBUTE_UNUSED;
enum cgen_parse_operand_type want;
- const char ** strP;
+ const char **strP;
int opindex;
int opinfo;
- enum cgen_parse_operand_result * resultP;
- bfd_vma * valueP;
+ enum cgen_parse_operand_result *resultP;
+ bfd_vma *valueP;
{
#ifdef __STDC__
/* These are volatile to survive the setjmp. */
char * volatile hold;
enum cgen_parse_operand_result * volatile resultP_1;
#else
- static char * hold;
- static enum cgen_parse_operand_result * resultP_1;
+ static char *hold;
+ static enum cgen_parse_operand_result *resultP_1;
#endif
- const char * errmsg = NULL;
+ const char *errmsg = NULL;
expressionS exp;
if (want == CGEN_PARSE_OPERAND_INIT)
resultP_1 = resultP;
hold = input_line_pointer;
- input_line_pointer = (char *) * strP;
+ input_line_pointer = (char *) *strP;
/* We rely on md_operand to longjmp back to us.
This is done via gas_cgen_md_operand. */
{
expr_jmp_buf_p = 0;
input_line_pointer = (char *) hold;
- * resultP_1 = CGEN_PARSE_OPERAND_RESULT_ERROR;
+ *resultP_1 = CGEN_PARSE_OPERAND_RESULT_ERROR;
return "illegal operand";
}
expr_jmp_buf_p = 1;
- expression (& exp);
+ expression (&exp);
expr_jmp_buf_p = 0;
- * strP = input_line_pointer;
+ *strP = input_line_pointer;
input_line_pointer = hold;
/* FIXME: Need to check `want'. */
switch (exp.X_op)
{
- case O_illegal :
+ case O_illegal:
errmsg = _("illegal operand");
- * resultP = CGEN_PARSE_OPERAND_RESULT_ERROR;
+ *resultP = CGEN_PARSE_OPERAND_RESULT_ERROR;
break;
- case O_absent :
+ case O_absent:
errmsg = _("missing operand");
- * resultP = CGEN_PARSE_OPERAND_RESULT_ERROR;
+ *resultP = CGEN_PARSE_OPERAND_RESULT_ERROR;
break;
- case O_constant :
- * valueP = exp.X_add_number;
- * resultP = CGEN_PARSE_OPERAND_RESULT_NUMBER;
+ case O_constant:
+ *valueP = exp.X_add_number;
+ *resultP = CGEN_PARSE_OPERAND_RESULT_NUMBER;
break;
- case O_register :
- * valueP = exp.X_add_number;
- * resultP = CGEN_PARSE_OPERAND_RESULT_REGISTER;
+ case O_register:
+ *valueP = exp.X_add_number;
+ *resultP = CGEN_PARSE_OPERAND_RESULT_REGISTER;
break;
- default :
- queue_fixup (opindex, opinfo, & exp);
- * valueP = 0;
- * resultP = CGEN_PARSE_OPERAND_RESULT_QUEUED;
+ default:
+ queue_fixup (opindex, opinfo, &exp);
+ *valueP = 0;
+ *resultP = CGEN_PARSE_OPERAND_RESULT_QUEUED;
break;
}
void
gas_cgen_md_operand (expressionP)
- expressionS * expressionP ATTRIBUTE_UNUSED;
+ expressionS *expressionP ATTRIBUTE_UNUSED;
{
/* Don't longjmp if we're not called from within cgen_parse_operand(). */
if (expr_jmp_buf_p)
void
gas_cgen_finish_insn (insn, buf, length, relax_p, result)
- const CGEN_INSN * insn;
+ const CGEN_INSN *insn;
CGEN_INSN_BYTES_PTR buf;
unsigned int length;
int relax_p;
- finished_insnS * result;
+ finished_insnS *result;
{
int i;
int relax_operand;
- char * f;
+ char *f;
unsigned int byte_len = length / 8;
/* ??? Target foo issues various warnings here, so one might want to provide
space for the largest insn. */
if (CGEN_INSN_ATTR_VALUE (insn, CGEN_INSN_RELAX))
- abort (); /* These currently shouldn't get here. */
+ /* These currently shouldn't get here. */
+ abort ();
/* Is there a relaxable insn with the relaxable operand needing a fixup? */
/* Scan the fixups for the operand affected by relaxing
(i.e. the branch address). */
- for (i = 0; i < num_fixups; ++ i)
+ for (i = 0; i < num_fixups; ++i)
{
if (CGEN_OPERAND_ATTR_VALUE (cgen_operand_lookup_by_num (gas_cgen_cpu_desc, fixups[i].opindex),
CGEN_OPERAND_RELAX))
if (relax_operand != -1)
{
int max_len;
- fragS * old_frag;
+ fragS *old_frag;
+ expressionS *exp;
+ symbolS *sym;
+ offsetT off;
#ifdef TC_CGEN_MAX_RELAX
max_len = TC_CGEN_MAX_RELAX (insn, byte_len);
/* Create a relaxable fragment for this instruction. */
old_frag = frag_now;
+ exp = &fixups[relax_operand].exp;
+ sym = exp->X_add_symbol;
+ off = exp->X_add_number;
+ if (exp->X_op != O_constant && exp->X_op != O_symbol)
+ {
+ /* Handle complex expressions. */
+ sym = make_expr_symbol (exp);
+ off = 0;
+ }
+
frag_var (rs_machine_dependent,
max_len - byte_len /* max chars */,
0 /* variable part already allocated */,
/* FIXME: When we machine generate the relax table,
machine generate a macro to compute subtype. */
1 /* subtype */,
- fixups[relax_operand].exp.X_add_symbol,
- fixups[relax_operand].exp.X_add_number,
+ sym,
+ off,
f);
/* Record the operand number with the fragment so md_convert_frag
memcpy (f, buf, byte_len);
#endif
+ /* Emit DWARF2 debugging information. */
+ dwarf2_emit_insn (byte_len);
+
/* Create any fixups. */
for (i = 0; i < num_fixups; ++i)
{
#define md_cgen_record_fixup_exp gas_cgen_record_fixup_exp
#endif
- fixP = md_cgen_record_fixup_exp (frag_now, f - frag_now->fr_literal,
- insn, length, operand,
- fixups[i].opinfo,
- & fixups[i].exp);
- if (result)
- result->fixups[i] = fixP;
+ fixP = md_cgen_record_fixup_exp (frag_now, f - frag_now->fr_literal,
+ insn, length, operand,
+ fixups[i].opinfo,
+ &fixups[i].exp);
+ if (result)
+ result->fixups[i] = fixP;
}
if (result)
valueT * valueP;
segT seg ATTRIBUTE_UNUSED;
{
- char * where = fixP->fx_frag->fr_literal + fixP->fx_where;
+ char *where = fixP->fx_frag->fr_literal + fixP->fx_where;
valueT value;
- /* canonical name, since used a lot */
+ /* Canonical name, since used a lot. */
CGEN_CPU_DESC cd = gas_cgen_cpu_desc;
-
+
/* FIXME FIXME FIXME: The value we are passed in *valuep includes
the symbol values. Since we are using BFD_ASSEMBLER, if we are
doing this relocation the code in write.c is going to call
if (fixP->fx_addsy == (symbolS *) NULL)
{
- value = * valueP;
+ value = *valueP;
fixP->fx_done = 1;
}
else if (fixP->fx_pcrel)
- value = * valueP;
+ value = *valueP;
else
{
value = fixP->fx_offset;
else
{
/* We don't actually support subtracting a symbol. */
- as_bad_where (fixP->fx_file, fixP->fx_line,
+ as_bad_where (fixP->fx_file, fixP->fx_line,
_("expression too complex"));
}
}
CGEN_INSN_INT insn_value =
cgen_get_insn_value (cd, where, CGEN_INSN_BITSIZE (insn));
- /* ??? 0 is passed for `pc' */
+ /* ??? 0 is passed for `pc'. */
errmsg = CGEN_CPU_INSERT_OPERAND (cd) (cd, opindex, fields,
&insn_value, (bfd_vma) 0);
cgen_put_insn_value (cd, where, CGEN_INSN_BITSIZE (insn),
insn_value);
}
#else
- /* ??? 0 is passed for `pc' */
- errmsg = CGEN_CPU_INSERT_OPERAND (cd) (cd, opindex, fields, where,
- (bfd_vma) 0);
+ /* ??? 0 is passed for `pc'. */
+ errmsg = CGEN_CPU_INSERT_OPERAND (cd) (cd, opindex, fields, where,
+ (bfd_vma) 0);
#endif
if (errmsg)
as_bad_where (fixP->fx_file, fixP->fx_line, "%s", errmsg);
case BFD_RELOC_32:
md_number_to_chars (where, value, 4);
break;
- /* FIXME: later add support for 64 bits. */
+ case BFD_RELOC_64:
+ md_number_to_chars (where, value, 8);
+ break;
default:
as_bad_where (fixP->fx_file, fixP->fx_line,
_("internal error: can't install fix for reloc type %d (`%s')"),
asection * section ATTRIBUTE_UNUSED;
fixS * fixP;
{
- arelent * reloc;
+ arelent *reloc;
reloc = (arelent *) xmalloc (sizeof (arelent));
if (reloc->howto == (reloc_howto_type *) NULL)
{
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("internal error: can't export reloc type %d (`%s')"),
- fixP->fx_r_type, bfd_get_reloc_code_name (fixP->fx_r_type));
+ _("relocation is not supported"));
return NULL;
}
reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
*reloc->sym_ptr_ptr = symbol_get_bfdsym (fixP->fx_addsy);
- /* Use fx_offset for these cases */
- if ( fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY
+ /* Use fx_offset for these cases. */
+ if (fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY
|| fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT)
- reloc->addend = fixP->fx_offset;
+ reloc->addend = fixP->fx_offset;
else
- reloc->addend = fixP->fx_addnumber;
+ reloc->addend = fixP->fx_addnumber;
reloc->address = fixP->fx_frag->fr_address + fixP->fx_where;
return reloc;