/* GAS interface for targets using CGEN: Cpu tools GENerator.
- Copyright (C) 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
+ Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+ Free Software Foundation, Inc.
-This file is part of GAS, the GNU Assembler.
+ This file is part of GAS, the GNU Assembler.
-GAS is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
+ GAS is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
-GAS is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ GAS is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with GAS; see the file COPYING. If not, write to the Free Software
-Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU General Public License
+ along with GAS; see the file COPYING. If not, write to the Free Software
+ Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include <setjmp.h>
#include "ansidecl.h"
#include "as.h"
#include "subsegs.h"
#include "cgen.h"
+#include "dwarf2dbg.h"
+
+static void queue_fixup PARAMS ((int, int, expressionS *));
/* Opcode table descriptor, must be set by md_begin. */
OPINDEX is the index in the operand table.
OPINFO is something the caller chooses to help in reloc determination. */
-struct fixup {
+struct fixup
+{
int opindex;
int opinfo;
expressionS exp;
++ num_fixups;
}
-/* The following three functions allow a backup of the fixup chain to be made,
- and to have this backup be swapped with the current chain. This allows
- certain ports, eg the m32r, to swap two instructions and swap their fixups
- at the same time. */
-/* ??? I think with cgen_asm_finish_insn (or something else) there is no
- more need for this. */
+/* The following functions allow fixup chains to be stored, retrieved,
+ and swapped. They are a generalization of a pre-existing scheme
+ for storing, restoring and swapping fixup chains that was used by
+ the m32r port. The functionality is essentially the same, only
+ instead of only being able to store a single fixup chain, an entire
+ array of fixup chains can be stored. It is the user's responsibility
+ to keep track of how many fixup chains have been stored and which
+ elements of the array they are in.
+
+ The algorithms used are the same as in the old scheme. Other than the
+ "array-ness" of the whole thing, the functionality is identical to the
+ old scheme.
+
+ gas_cgen_initialize_saved_fixups_array():
+ Sets num_fixups_in_chain to 0 for each element. Call this from
+ md_begin() if you plan to use these functions and you want the
+ fixup count in each element to be set to 0 initially. This is
+ not necessary, but it's included just in case. It performs
+ the same function for each element in the array of fixup chains
+ that gas_init_parse() performs for the current fixups.
+
+ gas_cgen_save_fixups (element):
+ element - element number of the array you wish to store the fixups
+ to. No mechanism is built in for tracking what element
+ was last stored to.
+
+ gas_cgen_restore_fixups (element):
+ element - element number of the array you wish to restore the fixups
+ from.
+
+ gas_cgen_swap_fixups(int element):
+ element - swap the current fixups with those in this element number.
+*/
+
+struct saved_fixups
+{
+ struct fixup fixup_chain[GAS_CGEN_MAX_FIXUPS];
+ int num_fixups_in_chain;
+};
-static struct fixup saved_fixups[GAS_CGEN_MAX_FIXUPS];
-static int saved_num_fixups;
+static struct saved_fixups stored_fixups[MAX_SAVED_FIXUP_CHAINS];
void
-gas_cgen_save_fixups ()
+gas_cgen_initialize_saved_fixups_array ()
{
- saved_num_fixups = num_fixups;
+ int i = 0;
- memcpy (saved_fixups, fixups, sizeof (fixups[0]) * num_fixups);
-
- num_fixups = 0;
+ while (i < MAX_SAVED_FIXUP_CHAINS)
+ stored_fixups[i++].num_fixups_in_chain = 0;
}
void
-gas_cgen_restore_fixups ()
+gas_cgen_save_fixups (i)
+ int i;
{
- num_fixups = saved_num_fixups;
-
- memcpy (fixups, saved_fixups, sizeof (fixups[0]) * num_fixups);
+ if (i < 0 || i >= MAX_SAVED_FIXUP_CHAINS)
+ {
+ as_fatal ("index into stored_fixups[] out of bounds");
+ return;
+ }
- saved_num_fixups = 0;
+ stored_fixups[i].num_fixups_in_chain = num_fixups;
+ memcpy (stored_fixups[i].fixup_chain, fixups,
+ sizeof (fixups[0]) * num_fixups);
+ num_fixups = 0;
}
void
-gas_cgen_swap_fixups ()
+gas_cgen_restore_fixups (i)
+ int i;
{
- int tmp;
- struct fixup tmp_fixup;
-
- if (num_fixups == 0)
+ if (i < 0 || i >= MAX_SAVED_FIXUP_CHAINS)
{
- gas_cgen_restore_fixups ();
+ as_fatal ("index into stored_fixups[] out of bounds");
+ return;
}
- else if (saved_num_fixups == 0)
+
+ num_fixups = stored_fixups[i].num_fixups_in_chain;
+ memcpy (fixups, stored_fixups[i].fixup_chain,
+ (sizeof (stored_fixups[i].fixup_chain[0])) * num_fixups);
+ stored_fixups[i].num_fixups_in_chain = 0;
+}
+
+void
+gas_cgen_swap_fixups (i)
+ int i;
+{
+ if (i < 0 || i >= MAX_SAVED_FIXUP_CHAINS)
{
- gas_cgen_save_fixups ();
+ as_fatal ("index into stored_fixups[] out of bounds");
+ return;
}
+
+ if (num_fixups == 0)
+ gas_cgen_restore_fixups (i);
+
+ else if (stored_fixups[i].num_fixups_in_chain == 0)
+ gas_cgen_save_fixups (i);
+
else
{
- tmp = saved_num_fixups;
- saved_num_fixups = num_fixups;
+ int tmp;
+ struct fixup tmp_fixup;
+
+ tmp = stored_fixups[i].num_fixups_in_chain;
+ stored_fixups[i].num_fixups_in_chain = num_fixups;
num_fixups = tmp;
for (tmp = GAS_CGEN_MAX_FIXUPS; tmp--;)
{
- tmp_fixup = saved_fixups [tmp];
- saved_fixups [tmp] = fixups [tmp];
- fixups [tmp] = tmp_fixup;
+ tmp_fixup = stored_fixups[i].fixup_chain [tmp];
+ stored_fixups[i].fixup_chain[tmp] = fixups [tmp];
+ fixups [tmp] = tmp_fixup;
}
}
}
At this point we do not use a bfd_reloc_code_real_type for
operands residing in the insn, but instead just use the
operand index. This lets us easily handle fixups for any
- operand type. We pick a BFD reloc type in md_apply_fix. */
+ operand type. We pick a BFD reloc type in md_apply_fix3. */
fixS *
gas_cgen_record_fixup (frag, where, insn, length, operand, opinfo, symbol, offset)
/* It may seem strange to use operand->attrs and not insn->attrs here,
but it is the operand that has a pc relative relocation. */
-
fixP = fix_new (frag, where, length / 8, symbol, offset,
CGEN_OPERAND_ATTR_VALUE (operand, CGEN_OPERAND_PCREL_ADDR),
(bfd_reloc_code_real_type)
At this point we do not use a bfd_reloc_code_real_type for
operands residing in the insn, but instead just use the
operand index. This lets us easily handle fixups for any
- operand type. We pick a BFD reloc type in md_apply_fix. */
+ operand type. We pick a BFD reloc type in md_apply_fix3. */
fixS *
gas_cgen_record_fixup_exp (frag, where, insn, length, operand, opinfo, exp)
/* It may seem strange to use operand->attrs and not insn->attrs here,
but it is the operand that has a pc relative relocation. */
-
fixP = fix_new_exp (frag, where, length / 8, exp,
CGEN_OPERAND_ATTR_VALUE (operand, CGEN_OPERAND_PCREL_ADDR),
(bfd_reloc_code_real_type)
static char *hold;
static enum cgen_parse_operand_result *resultP_1;
#endif
- const char *errmsg = NULL;
+ const char *errmsg;
expressionS exp;
if (want == CGEN_PARSE_OPERAND_INIT)
expr_jmp_buf_p = 0;
input_line_pointer = (char *) hold;
*resultP_1 = CGEN_PARSE_OPERAND_RESULT_ERROR;
- return "illegal operand";
+ return _("illegal operand");
}
expr_jmp_buf_p = 1;
expression (&exp);
expr_jmp_buf_p = 0;
+ errmsg = NULL;
*strP = input_line_pointer;
input_line_pointer = hold;
Relaxable instructions: We need to ensure we allocate enough
space for the largest insn. */
- if (CGEN_INSN_ATTR_VALUE (insn, CGEN_INSN_RELAX))
+ if (CGEN_INSN_ATTR_VALUE (insn, CGEN_INSN_RELAXED))
/* These currently shouldn't get here. */
abort ();
{
int max_len;
fragS *old_frag;
+ expressionS *exp;
+ symbolS *sym;
+ offsetT off;
#ifdef TC_CGEN_MAX_RELAX
max_len = TC_CGEN_MAX_RELAX (insn, byte_len);
/* Create a relaxable fragment for this instruction. */
old_frag = frag_now;
+ exp = &fixups[relax_operand].exp;
+ sym = exp->X_add_symbol;
+ off = exp->X_add_number;
+ if (exp->X_op != O_constant && exp->X_op != O_symbol)
+ {
+ /* Handle complex expressions. */
+ sym = make_expr_symbol (exp);
+ off = 0;
+ }
+
frag_var (rs_machine_dependent,
max_len - byte_len /* max chars */,
0 /* variable part already allocated */,
/* FIXME: When we machine generate the relax table,
machine generate a macro to compute subtype. */
1 /* subtype */,
- fixups[relax_operand].exp.X_add_symbol,
- fixups[relax_operand].exp.X_add_number,
+ sym,
+ off,
f);
/* Record the operand number with the fragment so md_convert_frag
memcpy (f, buf, byte_len);
#endif
+ /* Emit DWARF2 debugging information. */
+ dwarf2_emit_insn (byte_len);
+
/* Create any fixups. */
for (i = 0; i < num_fixups; ++i)
{
cgen_operand_lookup_by_num (gas_cgen_cpu_desc, fixups[i].opindex);
/* Don't create fixups for these. That's done during relaxation.
- We don't need to test for CGEN_INSN_RELAX as they can't get here
+ We don't need to test for CGEN_INSN_RELAXED as they can't get here
(see above). */
if (relax_p
&& CGEN_INSN_ATTR_VALUE (insn, CGEN_INSN_RELAXABLE)
handles the rest. bfd_install_relocation (or some other bfd function)
should handle them all. */
-int
-gas_cgen_md_apply_fix3 (fixP, valueP, seg)
+void
+gas_cgen_md_apply_fix3 (fixP, valP, seg)
fixS * fixP;
- valueT * valueP;
+ valueT * valP;
segT seg ATTRIBUTE_UNUSED;
{
char *where = fixP->fx_frag->fr_literal + fixP->fx_where;
- valueT value;
+ valueT value = * valP;
/* Canonical name, since used a lot. */
CGEN_CPU_DESC cd = gas_cgen_cpu_desc;
- /* FIXME FIXME FIXME: The value we are passed in *valuep includes
- the symbol values. Since we are using BFD_ASSEMBLER, if we are
- doing this relocation the code in write.c is going to call
- bfd_install_relocation, which is also going to use the symbol
- value. That means that if the reloc is fully resolved we want to
- use *valuep since bfd_install_relocation is not being used.
- However, if the reloc is not fully resolved we do not want to use
- *valuep, and must use fx_offset instead. However, if the reloc
- is PC relative, we do want to use *valuep since it includes the
- result of md_pcrel_from. This is confusing. */
-
if (fixP->fx_addsy == (symbolS *) NULL)
- {
- value = *valueP;
- fixP->fx_done = 1;
- }
- else if (fixP->fx_pcrel)
- value = *valueP;
- else
- {
- value = fixP->fx_offset;
- if (fixP->fx_subsy != (symbolS *) NULL)
- {
- if (S_GET_SEGMENT (fixP->fx_subsy) == absolute_section)
- value -= S_GET_VALUE (fixP->fx_subsy);
- else
- {
- /* We don't actually support subtracting a symbol. */
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("expression too complex"));
- }
- }
- }
+ fixP->fx_done = 1;
+
+ /* We don't actually support subtracting a symbol. */
+ if (fixP->fx_subsy != (symbolS *) NULL)
+ as_bad_where (fixP->fx_file, fixP->fx_line, _("expression too complex"));
if ((int) fixP->fx_r_type >= (int) BFD_RELOC_UNUSED)
{
}
if (fixP->fx_done)
- return 1;
+ return;
/* The operand isn't fully resolved. Determine a BFD reloc value
based on the operand information and leave it to
partial_inplace == false. */
reloc_type = md_cgen_lookup_reloc (insn, operand, fixP);
+
if (reloc_type != BFD_RELOC_NONE)
- {
- fixP->fx_r_type = reloc_type;
- }
+ fixP->fx_r_type = reloc_type;
else
{
as_bad_where (fixP->fx_file, fixP->fx_line,
_("unresolved expression that must be resolved"));
fixP->fx_done = 1;
- return 1;
+ return;
}
}
else if (fixP->fx_done)
case BFD_RELOC_32:
md_number_to_chars (where, value, 4);
break;
- /* FIXME: later add support for 64 bits. */
+ case BFD_RELOC_64:
+ md_number_to_chars (where, value, 8);
+ break;
default:
as_bad_where (fixP->fx_file, fixP->fx_line,
_("internal error: can't install fix for reloc type %d (`%s')"),
break;
}
}
- else
- {
- /* bfd_install_relocation will be called to finish things up. */
- }
+ /* else
+ bfd_install_relocation will be called to finish things up. */
/* Tuck `value' away for use by tc_gen_reloc.
See the comment describing fx_addnumber in write.h.
This field is misnamed (or misused :-). */
fixP->fx_addnumber = value;
-
- return 1;
}
/* Translate internal representation of relocation info to BFD target format.
if (reloc->howto == (reloc_howto_type *) NULL)
{
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("internal error: can't export reloc type %d (`%s')"),
- fixP->fx_r_type, bfd_get_reloc_code_name (fixP->fx_r_type));
+ _("relocation is not supported"));
return NULL;
}
reloc->address = fixP->fx_frag->fr_address + fixP->fx_where;
return reloc;
}
+
+/* Perform any cgen specific initialisation.
+ Called after gas_cgen_cpu_desc has been created. */
+
+void
+gas_cgen_begin ()
+{
+ if (flag_signed_overflow_ok)
+ cgen_set_signed_overflow_ok (gas_cgen_cpu_desc);
+ else
+ cgen_clear_signed_overflow_ok (gas_cgen_cpu_desc);
+}