/* tc-d10v.c -- Assembler code for the Mitsubishi D10V
- Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
- Free Software Foundation, Inc.
+ Copyright (C) 1996-2019 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ the Free Software Foundation; either version 3, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to
- the Free Software Foundation, 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ the Free Software Foundation, 51 Franklin Street - Fifth Floor,
+ Boston, MA 02110-1301, USA. */
-#include <stdio.h>
#include "as.h"
#include "safe-ctype.h"
#include "subsegs.h"
#include "opcode/d10v.h"
#include "elf/ppc.h"
+#include "dwarf2dbg.h"
-const char comment_chars[] = ";";
-const char line_comment_chars[] = "#";
+const char comment_chars[] = ";";
+const char line_comment_chars[] = "#";
const char line_separator_chars[] = "";
-const char *md_shortopts = "O";
-const char EXP_CHARS[] = "eE";
-const char FLT_CHARS[] = "dD";
+const char *md_shortopts = "O";
+const char EXP_CHARS[] = "eE";
+const char FLT_CHARS[] = "dD";
int Optimizing = 0;
#define AT_WORD_RIGHT_SHIFT 2
/* Fixups. */
-#define MAX_INSN_FIXUPS (5)
+#define MAX_INSN_FIXUPS 5
+
struct d10v_fixup
{
expressionS exp;
static bfd_boolean flag_allow_gstabs_packing = 1;
/* Local functions. */
-static int reg_name_search PARAMS ((char *name));
-static int register_name PARAMS ((expressionS *expressionP));
-static int check_range PARAMS ((unsigned long num, int bits, int flags));
-static int postfix PARAMS ((char *p));
-static bfd_reloc_code_real_type get_reloc PARAMS ((struct d10v_operand *op));
-static int get_operands PARAMS ((expressionS exp[]));
-static struct d10v_opcode *find_opcode PARAMS ((struct d10v_opcode *opcode, expressionS ops[]));
-static unsigned long build_insn PARAMS ((struct d10v_opcode *opcode, expressionS *opers, unsigned long insn));
-static void write_long PARAMS ((unsigned long insn, Fixups *fx));
-static void write_1_short PARAMS ((struct d10v_opcode *opcode, unsigned long insn, Fixups *fx));
-static int write_2_short PARAMS ((struct d10v_opcode *opcode1, unsigned long insn1,
- struct d10v_opcode *opcode2, unsigned long insn2, packing_type exec_type, Fixups *fx));
-static unsigned long do_assemble PARAMS ((char *str, struct d10v_opcode **opcode));
-static unsigned long d10v_insert_operand PARAMS (( unsigned long insn, int op_type,
- offsetT value, int left, fixS *fix));
-static int parallel_ok PARAMS ((struct d10v_opcode *opcode1, unsigned long insn1,
- struct d10v_opcode *opcode2, unsigned long insn2,
- packing_type exec_type));
-
-static void check_resource_conflict PARAMS ((struct d10v_opcode *opcode1,
- unsigned long insn1,
- struct d10v_opcode *opcode2,
- unsigned long insn2));
-
-static symbolS * find_symbol_matching_register PARAMS ((expressionS *));
+
+enum options
+{
+ OPTION_NOWARNSWAP = OPTION_MD_BASE,
+ OPTION_GSTABSPACKING,
+ OPTION_NOGSTABSPACKING
+};
struct option md_longopts[] =
{
-#define OPTION_NOWARNSWAP (OPTION_MD_BASE)
{"nowarnswap", no_argument, NULL, OPTION_NOWARNSWAP},
-#define OPTION_GSTABSPACKING (OPTION_MD_BASE + 1)
{"gstabspacking", no_argument, NULL, OPTION_GSTABSPACKING},
{"gstabs-packing", no_argument, NULL, OPTION_GSTABSPACKING},
-#define OPTION_NOGSTABSPACKING (OPTION_MD_BASE + 2)
{"nogstabspacking", no_argument, NULL, OPTION_NOGSTABSPACKING},
{"no-gstabs-packing", no_argument, NULL, OPTION_NOGSTABSPACKING},
{NULL, no_argument, NULL, 0}
size_t md_longopts_size = sizeof (md_longopts);
-static void d10v_dot_word PARAMS ((int));
-
-/* The target specific pseudo-ops which we support. */
-const pseudo_typeS md_pseudo_table[] =
-{
- { "word", d10v_dot_word, 2 },
- { NULL, NULL, 0 }
-};
-
/* Opcode hash table. */
static struct hash_control *d10v_hash;
/* Do a binary search of the d10v_predefined_registers array to see if
- NAME is a valid regiter name. Return the register number from the
+ NAME is a valid register name. Return the register number from the
array on success, or -1 on failure. */
static int
-reg_name_search (name)
- char *name;
+reg_name_search (char *name)
{
int middle, low, high;
int cmp;
to see if it is a valid register name. */
static int
-register_name (expressionP)
- expressionS *expressionP;
+register_name (expressionS *expressionP)
{
int reg_number;
char c, *p = input_line_pointer;
}
static int
-check_range (num, bits, flags)
- unsigned long num;
- int bits;
- int flags;
+check_range (unsigned long num, int bits, int flags)
{
long min, max;
int retval = 0;
}
void
-md_show_usage (stream)
- FILE *stream;
+md_show_usage (FILE *stream)
{
fprintf (stream, _("D10V options:\n\
-O Optimize. Will do some operations in parallel.\n\
}
int
-md_parse_option (c, arg)
- int c;
- char *arg ATTRIBUTE_UNUSED;
+md_parse_option (int c, const char *arg ATTRIBUTE_UNUSED)
{
switch (c)
{
}
symbolS *
-md_undefined_symbol (name)
- char *name ATTRIBUTE_UNUSED;
+md_undefined_symbol (char *name ATTRIBUTE_UNUSED)
{
return 0;
}
-/* Turn a string in input_line_pointer into a floating point constant
- of type TYPE, and store the appropriate bytes in *LITP. The number
- of LITTLENUMS emitted is stored in *SIZEP. An error message is
- returned, or NULL on OK. */
-
-char *
-md_atof (type, litP, sizeP)
- int type;
- char *litP;
- int *sizeP;
+const char *
+md_atof (int type, char *litP, int *sizeP)
{
- int prec;
- LITTLENUM_TYPE words[4];
- char *t;
- int i;
-
- switch (type)
- {
- case 'f':
- prec = 2;
- break;
- case 'd':
- prec = 4;
- break;
- default:
- *sizeP = 0;
- return _("bad call to md_atof");
- }
-
- t = atof_ieee (input_line_pointer, type, words);
- if (t)
- input_line_pointer = t;
-
- *sizeP = prec * 2;
-
- for (i = 0; i < prec; i++)
- {
- md_number_to_chars (litP, (valueT) words[i], 2);
- litP += 2;
- }
- return NULL;
+ return ieee_md_atof (type, litP, sizeP, TRUE);
}
void
-md_convert_frag (abfd, sec, fragP)
- bfd *abfd ATTRIBUTE_UNUSED;
- asection *sec ATTRIBUTE_UNUSED;
- fragS *fragP ATTRIBUTE_UNUSED;
+md_convert_frag (bfd *abfd ATTRIBUTE_UNUSED,
+ asection *sec ATTRIBUTE_UNUSED,
+ fragS *fragP ATTRIBUTE_UNUSED)
{
abort ();
}
valueT
-md_section_align (seg, addr)
- asection *seg;
- valueT addr;
+md_section_align (asection *seg, valueT addr)
{
- int align = bfd_get_section_alignment (stdoutput, seg);
- return ((addr + (1 << align) - 1) & (-1 << align));
+ int align = bfd_section_alignment (seg);
+ return ((addr + (1 << align) - 1) & -(1 << align));
}
void
-md_begin ()
+md_begin (void)
{
- char *prev_name = "";
+ const char *prev_name = "";
struct d10v_opcode *opcode;
d10v_hash = hash_new ();
from an expression. */
static int
-postfix (p)
- char *p;
+postfix (char *p)
{
while (*p != '-' && *p != '+')
{
if (*p == '-')
{
*p = ' ';
- return (-1);
+ return -1;
}
if (*p == '+')
{
*p = ' ';
- return (1);
+ return 1;
}
- return (0);
+ return 0;
}
static bfd_reloc_code_real_type
-get_reloc (op)
- struct d10v_operand *op;
+get_reloc (struct d10v_operand *op)
{
int bits = op->bits;
if (bits <= 4)
- return (0);
+ return 0;
if (op->flags & OPERAND_ADDR)
{
if (bits == 8)
- return (BFD_RELOC_D10V_10_PCREL_R);
+ return BFD_RELOC_D10V_10_PCREL_R;
else
- return (BFD_RELOC_D10V_18_PCREL);
+ return BFD_RELOC_D10V_18_PCREL;
}
- return (BFD_RELOC_16);
+ return BFD_RELOC_16;
}
/* Parse a string of operands. Return an array of expressions. */
static int
-get_operands (exp)
- expressionS exp[];
+get_operands (expressionS exp[])
{
char *p = input_line_pointer;
int numops = 0;
}
exp[numops].X_op = 0;
- return (numops);
+ return numops;
}
static unsigned long
-d10v_insert_operand (insn, op_type, value, left, fix)
- unsigned long insn;
- int op_type;
- offsetT value;
- int left;
- fixS *fix;
+d10v_insert_operand (unsigned long insn,
+ int op_type,
+ offsetT value,
+ int left,
+ fixS *fix)
{
int shift, bits;
array of operand expressions. Return the instruction. */
static unsigned long
-build_insn (opcode, opers, insn)
- struct d10v_opcode *opcode;
- expressionS *opers;
- unsigned long insn;
+build_insn (struct d10v_opcode *opcode,
+ expressionS *opers,
+ unsigned long insn)
{
int i, bits, shift, flags, format;
unsigned long number;
/* Write out a long form instruction. */
static void
-write_long (insn, fx)
- unsigned long insn;
- Fixups *fx;
+write_long (unsigned long insn, Fixups *fx)
{
int i, where;
char *f = frag_more (4);
+ dwarf2_emit_insn (4);
insn |= FM11;
number_to_chars_bigendian (f, insn, 4);
/* Write out a short form instruction by itself. */
static void
-write_1_short (opcode, insn, fx)
- struct d10v_opcode *opcode;
- unsigned long insn;
- Fixups *fx;
+write_1_short (struct d10v_opcode *opcode,
+ unsigned long insn,
+ Fixups *fx)
{
char *f = frag_more (4);
int i, where;
+ dwarf2_emit_insn (4);
if (opcode->exec_type & PARONLY)
as_fatal (_("Instruction must be executed in parallel with another instruction."));
fx->fc = 0;
}
-/* Expects two short instructions.
- If possible, writes out both as a single packed instruction.
- Otherwise, writes out the first one, packed with a NOP.
- Returns number of instructions not written out. */
+/* Determine if there are any resource conflicts among two manually
+ parallelized instructions. Some of this was lifted from parallel_ok. */
-static int
-write_2_short (opcode1, insn1, opcode2, insn2, exec_type, fx)
- struct d10v_opcode *opcode1, *opcode2;
- unsigned long insn1, insn2;
- packing_type exec_type;
- Fixups *fx;
+static void
+check_resource_conflict (struct d10v_opcode *op1,
+ unsigned long insn1,
+ struct d10v_opcode *op2,
+ unsigned long insn2)
{
- unsigned long insn;
- char *f;
- int i, j, where;
-
- if ((exec_type != PACK_PARALLEL)
- && ((opcode1->exec_type & PARONLY) || (opcode2->exec_type & PARONLY)))
- as_fatal (_("Instruction must be executed in parallel"));
-
- if ((opcode1->format & LONG_OPCODE) || (opcode2->format & LONG_OPCODE))
- as_fatal (_("Long instructions may not be combined."));
+ int i, j, flags, mask, shift, regno;
+ unsigned long ins, mod[2];
+ struct d10v_opcode *op;
- switch (exec_type)
+ if ((op1->exec_type & SEQ)
+ || ! ((op1->exec_type & PAR) || (op1->exec_type & PARONLY)))
{
- case PACK_UNSPEC: /* Order not specified. */
- if (opcode1->exec_type & ALONE)
- {
- /* Case of a short branch on a separate GAS line. Pack with NOP. */
- write_1_short (opcode1, insn1, fx->next);
- return 1;
- }
- if (Optimizing
- && parallel_ok (opcode1, insn1, opcode2, insn2, exec_type))
- {
- /* Parallel. */
- if (opcode1->unit == IU)
- insn = FM00 | (insn2 << 15) | insn1;
- else if (opcode2->unit == MU)
- insn = FM00 | (insn2 << 15) | insn1;
- else
- insn = FM00 | (insn1 << 15) | insn2;
- }
- else if (opcode1->unit == IU)
- /* Reverse sequential with IU opcode1 on right and done first. */
- insn = FM10 | (insn2 << 15) | insn1;
- else
- /* Sequential with non-IU opcode1 on left and done first. */
- insn = FM01 | (insn1 << 15) | insn2;
- break;
-
- case PACK_PARALLEL:
- if (opcode1->exec_type & SEQ || opcode2->exec_type & SEQ)
- as_fatal
- (_("One of these instructions may not be executed in parallel."));
- if (opcode1->unit == IU)
- {
- if (opcode2->unit == IU)
- as_fatal (_("Two IU instructions may not be executed in parallel"));
- if (!flag_warn_suppress_instructionswap)
- as_warn (_("Swapping instruction order"));
- insn = FM00 | (insn2 << 15) | insn1;
- }
- else if (opcode2->unit == MU)
- {
- if (opcode1->unit == MU)
- as_fatal (_("Two MU instructions may not be executed in parallel"));
- if (!flag_warn_suppress_instructionswap)
- as_warn (_("Swapping instruction order"));
- insn = FM00 | (insn2 << 15) | insn1;
- }
- else
- insn = FM00 | (insn1 << 15) | insn2;
- check_resource_conflict (opcode1, insn1, opcode2, insn2);
- break;
-
- case PACK_LEFT_RIGHT:
- if (opcode1->unit != IU)
- insn = FM01 | (insn1 << 15) | insn2;
- else if (opcode2->unit == MU || opcode2->unit == EITHER)
- {
- if (!flag_warn_suppress_instructionswap)
- as_warn (_("Swapping instruction order"));
- insn = FM10 | (insn2 << 15) | insn1;
- }
- else
- as_fatal (_("IU instruction may not be in the left container"));
- if (opcode1->exec_type & ALONE)
- as_warn (_("Instruction in R container is squashed by flow control instruction in L container."));
- break;
-
- case PACK_RIGHT_LEFT:
- if (opcode2->unit != MU)
- insn = FM10 | (insn1 << 15) | insn2;
- else if (opcode1->unit == IU || opcode1->unit == EITHER)
- {
- if (!flag_warn_suppress_instructionswap)
- as_warn (_("Swapping instruction order"));
- insn = FM01 | (insn2 << 15) | insn1;
- }
- else
- as_fatal (_("MU instruction may not be in the right container"));
- if (opcode2->exec_type & ALONE)
- as_warn (_("Instruction in R container is squashed by flow control instruction in L container."));
- break;
-
- default:
- as_fatal (_("unknown execution type passed to write_2_short()"));
+ as_warn (_("packing conflict: %s must dispatch sequentially"),
+ op1->name);
+ return;
}
- f = frag_more (4);
- number_to_chars_bigendian (f, insn, 4);
-
- /* Process fixup chains. fx refers to insn2 when j == 0, and to
- insn1 when j == 1. Yes, it's reversed. */
-
- for (j = 0; j < 2; j++)
+ if ((op2->exec_type & SEQ)
+ || ! ((op2->exec_type & PAR) || (op2->exec_type & PARONLY)))
{
- for (i = 0; i < fx->fc; i++)
- {
- if (fx->fix[i].reloc)
- {
- where = f - frag_now->fr_literal;
- if (fx->fix[i].size == 2)
- where += 2;
-
- if (fx->fix[i].reloc == BFD_RELOC_D10V_10_PCREL_R
- /* A BFD_RELOC_D10V_10_PCREL_R relocation applied to
- the instruction in the L container has to be
- adjusted to BDF_RELOC_D10V_10_PCREL_L. When
- j==0, we're processing insn2's operands, so we
- want to mark the operand if insn2 is *not* in the
- R container. When j==1, we're processing insn1's
- operands, so we want to mark the operand if insn2
- *is* in the R container. Note that, if two
- instructions are identical, we're never going to
- swap them, so the test is safe. */
- && j == ((insn & 0x7fff) == insn2))
- fx->fix[i].operand |= 1024;
-
- if (fx->fix[i].reloc == BFD_RELOC_D10V_18)
- fx->fix[i].operand |= 4096;
-
- fix_new_exp (frag_now,
- where,
- fx->fix[i].size,
- &(fx->fix[i].exp),
- fx->fix[i].pcrel,
- fx->fix[i].operand|2048);
- }
- }
- fx->fc = 0;
- fx = fx->next;
+ as_warn (_("packing conflict: %s must dispatch sequentially"),
+ op2->name);
+ return;
}
- return (0);
-}
-
-/* Check 2 instructions and determine if they can be safely
- executed in parallel. Return 1 if they can be. */
-
-static int
-parallel_ok (op1, insn1, op2, insn2, exec_type)
- struct d10v_opcode *op1, *op2;
- unsigned long insn1, insn2;
- packing_type exec_type;
-{
- int i, j, flags, mask, shift, regno;
- unsigned long ins, mod[2], used[2];
- struct d10v_opcode *op;
-
- if ((op1->exec_type & SEQ) != 0 || (op2->exec_type & SEQ) != 0
- || (op1->exec_type & PAR) == 0 || (op2->exec_type & PAR) == 0
- || (op1->unit == BOTH) || (op2->unit == BOTH)
- || (op1->unit == IU && op2->unit == IU)
- || (op1->unit == MU && op2->unit == MU))
- return 0;
- /* If this is auto parallelization, and the first instruction is a
- branch or should not be packed, then don't parallelize. */
- if (exec_type == PACK_UNSPEC
- && (op1->exec_type & (ALONE | BRANCH)))
- return 0;
+ /* See if both instructions write to the same resource.
- /* The idea here is to create two sets of bitmasks (mod and used)
- which indicate which registers are modified or used by each
- instruction. The operation can only be done in parallel if
- instruction 1 and instruction 2 modify different registers, and
- the first instruction does not modify registers that the second
- is using (The second instruction can modify registers that the
- first is using as they are only written back after the first
- instruction has completed). Accesses to control registers, PSW,
- and memory are treated as accesses to a single register. So if
- both instructions write memory or if the first instruction writes
- memory and the second reads, then they cannot be done in
- parallel. Likewise, if the first instruction mucks with the psw
- and the second reads the PSW (which includes C, F0, and F1), then
- they cannot operate safely in parallel. */
+ The idea here is to create two sets of bitmasks (mod and used) which
+ indicate which registers are modified or used by each instruction.
+ The operation can only be done in parallel if neither instruction
+ modifies the same register. Accesses to control registers and memory
+ are treated as accesses to a single register. So if both instructions
+ write memory or if the first instruction writes memory and the second
+ reads, then they cannot be done in parallel. We treat reads to the PSW
+ (which includes C, F0, and F1) in isolation. So simultaneously writing
+ C and F0 in two different sub-instructions is permitted. */
/* The bitmasks (mod and used) look like this (bit 31 = MSB).
r0-r15 0-15
a0-a1 16-17
cr (not psw) 18
- psw 19
- mem 20 */
+ psw(other) 19
+ mem 20
+ psw(C flag) 21
+ psw(F0 flag) 22 */
for (j = 0; j < 2; j++)
{
op = op2;
ins = insn2;
}
- mod[j] = used[j] = 0;
+ mod[j] = 0;
if (op->exec_type & BRANCH_LINK)
mod[j] |= 1 << 13;
regno = (ins >> shift) & mask;
if (flags & (OPERAND_ACC0 | OPERAND_ACC1))
regno += 16;
- else if (flags & OPERAND_CONTROL) /* mvtc or mvfc. */
+ else if (flags & OPERAND_CONTROL) /* mvtc or mvfc */
{
if (regno == 0)
regno = 19;
else
regno = 18;
}
- else if (flags & (OPERAND_FFLAG | OPERAND_CFLAG))
- regno = 19;
+ else if (flags & OPERAND_FFLAG)
+ regno = 22;
+ else if (flags & OPERAND_CFLAG)
+ regno = 21;
- if (flags & OPERAND_DEST)
+ if (flags & OPERAND_DEST
+ /* Auto inc/dec also modifies the register. */
+ || (op->operands[i + 1] != 0
+ && (d10v_operands[op->operands[i + 1]].flags
+ & (OPERAND_PLUS | OPERAND_MINUS)) != 0))
{
mod[j] |= 1 << regno;
if (flags & OPERAND_EVEN)
mod[j] |= 1 << (regno + 1);
}
- else
- {
- used[j] |= 1 << regno;
- if (flags & OPERAND_EVEN)
- used[j] |= 1 << (regno + 1);
-
- /* Auto inc/dec also modifies the register. */
- if (op->operands[i + 1] != 0
- && (d10v_operands[op->operands[i + 1]].flags
- & (OPERAND_PLUS | OPERAND_MINUS)) != 0)
- mod[j] |= 1 << regno;
- }
}
else if (flags & OPERAND_ATMINUS)
{
/* SP implicitly used/modified. */
mod[j] |= 1 << 15;
- used[j] |= 1 << 15;
}
}
- if (op->exec_type & RMEM)
- used[j] |= 1 << 20;
- else if (op->exec_type & WMEM)
+
+ if (op->exec_type & WMEM)
mod[j] |= 1 << 20;
- else if (op->exec_type & RF0)
- used[j] |= 1 << 19;
else if (op->exec_type & WF0)
- mod[j] |= 1 << 19;
+ mod[j] |= 1 << 22;
else if (op->exec_type & WCAR)
- mod[j] |= 1 << 19;
+ mod[j] |= 1 << 21;
+ }
+
+ if ((mod[0] & mod[1]) == 0)
+ return;
+ else
+ {
+ unsigned long x;
+ x = mod[0] & mod[1];
+
+ for (j = 0; j <= 15; j++)
+ if (x & (1 << j))
+ as_warn (_("resource conflict (R%d)"), j);
+ for (j = 16; j <= 17; j++)
+ if (x & (1 << j))
+ as_warn (_("resource conflict (A%d)"), j - 16);
+ if (x & (1 << 19))
+ as_warn (_("resource conflict (PSW)"));
+ if (x & (1 << 21))
+ as_warn (_("resource conflict (C flag)"));
+ if (x & (1 << 22))
+ as_warn (_("resource conflict (F flag)"));
}
- if ((mod[0] & mod[1]) == 0 && (mod[0] & used[1]) == 0)
- return 1;
- return 0;
}
-/* Determine if there are any resource conflicts among two manually
- parallelized instructions. Some of this was lifted from parallel_ok. */
+/* Check 2 instructions and determine if they can be safely
+ executed in parallel. Return 1 if they can be. */
-static void
-check_resource_conflict (op1, insn1, op2, insn2)
- struct d10v_opcode *op1, *op2;
- unsigned long insn1, insn2;
+static int
+parallel_ok (struct d10v_opcode *op1,
+ unsigned long insn1,
+ struct d10v_opcode *op2,
+ unsigned long insn2,
+ packing_type exec_type)
{
int i, j, flags, mask, shift, regno;
- unsigned long ins, mod[2];
+ unsigned long ins, mod[2], used[2];
struct d10v_opcode *op;
- if ((op1->exec_type & SEQ)
- || ! ((op1->exec_type & PAR) || (op1->exec_type & PARONLY)))
- {
- as_warn (_("packing conflict: %s must dispatch sequentially"),
- op1->name);
- return;
- }
-
- if ((op2->exec_type & SEQ)
- || ! ((op2->exec_type & PAR) || (op2->exec_type & PARONLY)))
- {
- as_warn (_("packing conflict: %s must dispatch sequentially"),
- op2->name);
- return;
- }
+ if ((op1->exec_type & SEQ) != 0 || (op2->exec_type & SEQ) != 0
+ || (op1->exec_type & PAR) == 0 || (op2->exec_type & PAR) == 0
+ || (op1->unit == BOTH) || (op2->unit == BOTH)
+ || (op1->unit == IU && op2->unit == IU)
+ || (op1->unit == MU && op2->unit == MU))
+ return 0;
- /* See if both instructions write to the same resource.
+ /* If this is auto parallelization, and the first instruction is a
+ branch or should not be packed, then don't parallelize. */
+ if (exec_type == PACK_UNSPEC
+ && (op1->exec_type & (ALONE | BRANCH)))
+ return 0;
- The idea here is to create two sets of bitmasks (mod and used) which
- indicate which registers are modified or used by each instruction.
- The operation can only be done in parallel if neither instruction
- modifies the same register. Accesses to control registers and memory
- are treated as accesses to a single register. So if both instructions
- write memory or if the first instruction writes memory and the second
- reads, then they cannot be done in parallel. We treat reads to the PSW
- (which includes C, F0, and F1) in isolation. So simultaneously writing
- C and F0 in two different sub-instructions is permitted. */
+ /* The idea here is to create two sets of bitmasks (mod and used)
+ which indicate which registers are modified or used by each
+ instruction. The operation can only be done in parallel if
+ instruction 1 and instruction 2 modify different registers, and
+ the first instruction does not modify registers that the second
+ is using (The second instruction can modify registers that the
+ first is using as they are only written back after the first
+ instruction has completed). Accesses to control registers, PSW,
+ and memory are treated as accesses to a single register. So if
+ both instructions write memory or if the first instruction writes
+ memory and the second reads, then they cannot be done in
+ parallel. Likewise, if the first instruction mucks with the psw
+ and the second reads the PSW (which includes C, F0, and F1), then
+ they cannot operate safely in parallel. */
/* The bitmasks (mod and used) look like this (bit 31 = MSB).
r0-r15 0-15
a0-a1 16-17
cr (not psw) 18
- psw(other) 19
- mem 20
- psw(C flag) 21
- psw(F0 flag) 22 */
+ psw 19
+ mem 20 */
for (j = 0; j < 2; j++)
{
op = op2;
ins = insn2;
}
- mod[j] = 0;
+ mod[j] = used[j] = 0;
if (op->exec_type & BRANCH_LINK)
mod[j] |= 1 << 13;
regno = (ins >> shift) & mask;
if (flags & (OPERAND_ACC0 | OPERAND_ACC1))
regno += 16;
- else if (flags & OPERAND_CONTROL) /* mvtc or mvfc */
+ else if (flags & OPERAND_CONTROL) /* mvtc or mvfc. */
{
if (regno == 0)
regno = 19;
else
regno = 18;
}
- else if (flags & OPERAND_FFLAG)
- regno = 22;
- else if (flags & OPERAND_CFLAG)
- regno = 21;
+ else if (flags & (OPERAND_FFLAG | OPERAND_CFLAG))
+ regno = 19;
- if (flags & OPERAND_DEST
- /* Auto inc/dec also modifies the register. */
- || (op->operands[i + 1] != 0
- && (d10v_operands[op->operands[i + 1]].flags
- & (OPERAND_PLUS | OPERAND_MINUS)) != 0))
+ if (flags & OPERAND_DEST)
{
mod[j] |= 1 << regno;
if (flags & OPERAND_EVEN)
mod[j] |= 1 << (regno + 1);
}
+ else
+ {
+ used[j] |= 1 << regno;
+ if (flags & OPERAND_EVEN)
+ used[j] |= 1 << (regno + 1);
+
+ /* Auto inc/dec also modifies the register. */
+ if (op->operands[i + 1] != 0
+ && (d10v_operands[op->operands[i + 1]].flags
+ & (OPERAND_PLUS | OPERAND_MINUS)) != 0)
+ mod[j] |= 1 << regno;
+ }
}
else if (flags & OPERAND_ATMINUS)
{
/* SP implicitly used/modified. */
mod[j] |= 1 << 15;
+ used[j] |= 1 << 15;
}
}
-
- if (op->exec_type & WMEM)
+ if (op->exec_type & RMEM)
+ used[j] |= 1 << 20;
+ else if (op->exec_type & WMEM)
mod[j] |= 1 << 20;
+ else if (op->exec_type & RF0)
+ used[j] |= 1 << 19;
else if (op->exec_type & WF0)
- mod[j] |= 1 << 22;
+ mod[j] |= 1 << 19;
else if (op->exec_type & WCAR)
- mod[j] |= 1 << 21;
- }
-
- if ((mod[0] & mod[1]) == 0)
- return;
- else
- {
- unsigned long x;
- x = mod[0] & mod[1];
-
- for (j = 0; j <= 15; j++)
- if (x & (1 << j))
- as_warn (_("resource conflict (R%d)"), j);
- for (j = 16; j <= 17; j++)
- if (x & (1 << j))
- as_warn (_("resource conflict (A%d)"), j - 16);
- if (x & (1 << 19))
- as_warn (_("resource conflict (PSW)"));
- if (x & (1 << 21))
- as_warn (_("resource conflict (C flag)"));
- if (x & (1 << 22))
- as_warn (_("resource conflict (F flag)"));
+ mod[j] |= 1 << 19;
}
+ if ((mod[0] & mod[1]) == 0 && (mod[0] & used[1]) == 0)
+ return 1;
+ return 0;
}
-/* This is the main entry point for the machine-dependent assembler.
- str points to a machine-dependent instruction. This function is
- supposed to emit the frags/bytes it assembles to. For the D10V, it
- mostly handles the special VLIW parsing and packing and leaves the
- difficult stuff to do_assemble(). */
-
-static unsigned long prev_insn;
-static struct d10v_opcode *prev_opcode = 0;
-static subsegT prev_subseg;
-static segT prev_seg = 0;;
+/* Expects two short instructions.
+ If possible, writes out both as a single packed instruction.
+ Otherwise, writes out the first one, packed with a NOP.
+ Returns number of instructions not written out. */
-void
-md_assemble (str)
- char *str;
+static int
+write_2_short (struct d10v_opcode *opcode1,
+ unsigned long insn1,
+ struct d10v_opcode *opcode2,
+ unsigned long insn2,
+ packing_type exec_type,
+ Fixups *fx)
{
- /* etype is saved extype. For multi-line instructions. */
+ unsigned long insn;
+ char *f;
+ int i, j, where;
- packing_type extype = PACK_UNSPEC; /* Parallel, etc. */
+ if ((exec_type != PACK_PARALLEL)
+ && ((opcode1->exec_type & PARONLY) || (opcode2->exec_type & PARONLY)))
+ as_fatal (_("Instruction must be executed in parallel"));
- struct d10v_opcode *opcode;
- unsigned long insn;
- char *str2;
+ if ((opcode1->format & LONG_OPCODE) || (opcode2->format & LONG_OPCODE))
+ as_fatal (_("Long instructions may not be combined."));
- if (etype == PACK_UNSPEC)
+ switch (exec_type)
{
- /* Look for the special multiple instruction separators. */
- str2 = strstr (str, "||");
- if (str2)
- extype = PACK_PARALLEL;
- else
+ case PACK_UNSPEC: /* Order not specified. */
+ if (opcode1->exec_type & ALONE)
{
- str2 = strstr (str, "->");
- if (str2)
- extype = PACK_LEFT_RIGHT;
+ /* Case of a short branch on a separate GAS line. Pack with NOP. */
+ write_1_short (opcode1, insn1, fx->next);
+ return 1;
+ }
+ if (Optimizing
+ && parallel_ok (opcode1, insn1, opcode2, insn2, exec_type))
+ {
+ /* Parallel. */
+ if (opcode1->unit == IU)
+ insn = FM00 | (insn2 << 15) | insn1;
+ else if (opcode2->unit == MU)
+ insn = FM00 | (insn2 << 15) | insn1;
else
- {
- str2 = strstr (str, "<-");
- if (str2)
- extype = PACK_RIGHT_LEFT;
- }
+ insn = FM00 | (insn1 << 15) | insn2;
}
+ else if (opcode1->unit == IU)
+ /* Reverse sequential with IU opcode1 on right and done first. */
+ insn = FM10 | (insn2 << 15) | insn1;
+ else
+ /* Sequential with non-IU opcode1 on left and done first. */
+ insn = FM01 | (insn1 << 15) | insn2;
+ break;
- /* str2 points to the separator, if there is one. */
- if (str2)
+ case PACK_PARALLEL:
+ if (opcode1->exec_type & SEQ || opcode2->exec_type & SEQ)
+ as_fatal
+ (_("One of these instructions may not be executed in parallel."));
+ if (opcode1->unit == IU)
{
- *str2 = 0;
-
- /* If two instructions are present and we already have one saved,
- then first write out the saved one. */
- d10v_cleanup ();
-
- /* Assemble first instruction and save it. */
- prev_insn = do_assemble (str, &prev_opcode);
- prev_seg = now_seg;
- prev_subseg = now_subseg;
- if (prev_insn == (unsigned long) -1)
- as_fatal (_("can't find opcode "));
- fixups = fixups->next;
- str = str2 + 2;
+ if (opcode2->unit == IU)
+ as_fatal (_("Two IU instructions may not be executed in parallel"));
+ if (!flag_warn_suppress_instructionswap)
+ as_warn (_("Swapping instruction order"));
+ insn = FM00 | (insn2 << 15) | insn1;
}
- }
-
- insn = do_assemble (str, &opcode);
- if (insn == (unsigned long) -1)
- {
- if (extype != PACK_UNSPEC)
+ else if (opcode2->unit == MU)
{
- etype = extype;
- return;
+ if (opcode1->unit == MU)
+ as_fatal (_("Two MU instructions may not be executed in parallel"));
+ if (!flag_warn_suppress_instructionswap)
+ as_warn (_("Swapping instruction order"));
+ insn = FM00 | (insn2 << 15) | insn1;
}
- as_fatal (_("can't find opcode "));
- }
-
- if (etype != PACK_UNSPEC)
- {
- extype = etype;
- etype = PACK_UNSPEC;
- }
+ else
+ insn = FM00 | (insn1 << 15) | insn2;
+ check_resource_conflict (opcode1, insn1, opcode2, insn2);
+ break;
- /* If this is a long instruction, write it and any previous short
- instruction. */
- if (opcode->format & LONG_OPCODE)
- {
- if (extype != PACK_UNSPEC)
- as_fatal (_("Unable to mix instructions as specified"));
- d10v_cleanup ();
- write_long (insn, fixups);
- prev_opcode = NULL;
- return;
- }
+ case PACK_LEFT_RIGHT:
+ if (opcode1->unit != IU)
+ insn = FM01 | (insn1 << 15) | insn2;
+ else if (opcode2->unit == MU || opcode2->unit == EITHER)
+ {
+ if (!flag_warn_suppress_instructionswap)
+ as_warn (_("Swapping instruction order"));
+ insn = FM10 | (insn2 << 15) | insn1;
+ }
+ else
+ as_fatal (_("IU instruction may not be in the left container"));
+ if (opcode1->exec_type & ALONE)
+ as_warn (_("Instruction in R container is squashed by flow control instruction in L container."));
+ break;
- if (prev_opcode
- && prev_seg
- && ((prev_seg != now_seg) || (prev_subseg != now_subseg)))
- d10v_cleanup ();
+ case PACK_RIGHT_LEFT:
+ if (opcode2->unit != MU)
+ insn = FM10 | (insn1 << 15) | insn2;
+ else if (opcode1->unit == IU || opcode1->unit == EITHER)
+ {
+ if (!flag_warn_suppress_instructionswap)
+ as_warn (_("Swapping instruction order"));
+ insn = FM01 | (insn2 << 15) | insn1;
+ }
+ else
+ as_fatal (_("MU instruction may not be in the right container"));
+ if (opcode2->exec_type & ALONE)
+ as_warn (_("Instruction in R container is squashed by flow control instruction in L container."));
+ break;
- if (prev_opcode
- && (0 == write_2_short (prev_opcode, prev_insn, opcode, insn, extype,
- fixups)))
- {
- /* No instructions saved. */
- prev_opcode = NULL;
- }
- else
- {
- if (extype != PACK_UNSPEC)
- as_fatal (_("Unable to mix instructions as specified"));
- /* Save last instruction so it may be packed on next pass. */
- prev_opcode = opcode;
- prev_insn = insn;
- prev_seg = now_seg;
- prev_subseg = now_subseg;
- fixups = fixups->next;
+ default:
+ as_fatal (_("unknown execution type passed to write_2_short()"));
}
-}
-
-/* Assemble a single instruction.
- Return an opcode, or -1 (an invalid opcode) on error. */
-static unsigned long
-do_assemble (str, opcode)
- char *str;
- struct d10v_opcode **opcode;
-{
- unsigned char *op_start, *save;
- unsigned char *op_end;
- char name[20];
- int nlen = 0;
- expressionS myops[6];
- unsigned long insn;
+ f = frag_more (4);
+ dwarf2_emit_insn (4);
+ number_to_chars_bigendian (f, insn, 4);
- /* Drop leading whitespace. */
- while (*str == ' ')
- str++;
+ /* Process fixup chains. fx refers to insn2 when j == 0, and to
+ insn1 when j == 1. Yes, it's reversed. */
- /* Find the opcode end. */
- for (op_start = op_end = (unsigned char *) (str);
- *op_end
- && nlen < 20
- && !is_end_of_line[*op_end] && *op_end != ' ';
- op_end++)
+ for (j = 0; j < 2; j++)
{
- name[nlen] = TOLOWER (op_start[nlen]);
- nlen++;
- }
- name[nlen] = 0;
-
- if (nlen == 0)
- return -1;
+ for (i = 0; i < fx->fc; i++)
+ {
+ if (fx->fix[i].reloc)
+ {
+ where = f - frag_now->fr_literal;
+ if (fx->fix[i].size == 2)
+ where += 2;
- /* Find the first opcode with the proper name. */
- *opcode = (struct d10v_opcode *) hash_find (d10v_hash, name);
- if (*opcode == NULL)
- as_fatal (_("unknown opcode: %s"), name);
+ if (fx->fix[i].reloc == BFD_RELOC_D10V_10_PCREL_R
+ /* A BFD_RELOC_D10V_10_PCREL_R relocation applied to
+ the instruction in the L container has to be
+ adjusted to BDF_RELOC_D10V_10_PCREL_L. When
+ j==0, we're processing insn2's operands, so we
+ want to mark the operand if insn2 is *not* in the
+ R container. When j==1, we're processing insn1's
+ operands, so we want to mark the operand if insn2
+ *is* in the R container. Note that, if two
+ instructions are identical, we're never going to
+ swap them, so the test is safe. */
+ && j == ((insn & 0x7fff) == insn2))
+ fx->fix[i].operand |= 1024;
- save = input_line_pointer;
- input_line_pointer = op_end;
- *opcode = find_opcode (*opcode, myops);
- if (*opcode == 0)
- return -1;
- input_line_pointer = save;
+ if (fx->fix[i].reloc == BFD_RELOC_D10V_18)
+ fx->fix[i].operand |= 4096;
- insn = build_insn ((*opcode), myops, 0);
- return (insn);
+ fix_new_exp (frag_now,
+ where,
+ fx->fix[i].size,
+ &(fx->fix[i].exp),
+ fx->fix[i].pcrel,
+ fx->fix[i].operand|2048);
+ }
+ }
+ fx->fc = 0;
+ fx = fx->next;
+ }
+ return 0;
}
+/* This is the main entry point for the machine-dependent assembler.
+ str points to a machine-dependent instruction. This function is
+ supposed to emit the frags/bytes it assembles to. For the D10V, it
+ mostly handles the special VLIW parsing and packing and leaves the
+ difficult stuff to do_assemble(). */
+
+static unsigned long prev_insn;
+static struct d10v_opcode *prev_opcode = 0;
+static subsegT prev_subseg;
+static segT prev_seg = 0;
+
/* Find the symbol which has the same name as the register in exp. */
static symbolS *
-find_symbol_matching_register (exp)
- expressionS *exp;
+find_symbol_matching_register (expressionS *exp)
{
int i;
the operands to choose the correct opcode. */
static struct d10v_opcode *
-find_opcode (opcode, myops)
- struct d10v_opcode *opcode;
- expressionS myops[];
+find_opcode (struct d10v_opcode *opcode, expressionS myops[])
{
int i, match;
struct d10v_opcode *next_opcode;
for (i = 0; opcode->operands[i + 1]; i++)
{
int bits = d10v_operands[next_opcode->operands[opnum]].bits;
- int flags = d10v_operands[next_opcode->operands[opnum]].flags;
+
+ flags = d10v_operands[next_opcode->operands[opnum]].flags;
+
if (flags & OPERAND_ADDR)
bits += 2;
sym_frag = symbol_get_frag (myops[opnum].X_add_symbol);
found_symbol = FALSE;
- current_position =
- obstack_next_free (&frchain_now->frch_obstack)
- - frag_now->fr_literal;
+ current_position = frag_now_fix_octets ();
symbol_position = S_GET_VALUE (myops[opnum].X_add_symbol);
for (f = frchain_now->frch_root; f; f = f->fr_next)
opcode = next_opcode;
}
else
- {
- /* Not a constant, so use a long instruction. */
- opcode += 2;
- }
+ /* Not a constant, so use a long instruction. */
+ opcode += 2;
}
match = 0;
if (!match)
{
as_bad (_("bad opcode or operands"));
- return (0);
+ return 0;
}
/* Check that all registers that are required to be even are.
return opcode;
}
+/* Assemble a single instruction.
+ Return an opcode, or -1 (an invalid opcode) on error. */
+
+static unsigned long
+do_assemble (char *str, struct d10v_opcode **opcode)
+{
+ unsigned char *op_start, *op_end;
+ char *save;
+ char name[20];
+ int nlen = 0;
+ expressionS myops[6];
+
+ /* Drop leading whitespace. */
+ while (*str == ' ')
+ str++;
+
+ /* Find the opcode end. */
+ for (op_start = op_end = (unsigned char *) str;
+ *op_end && !is_end_of_line[*op_end] && *op_end != ' ';
+ op_end++)
+ {
+ name[nlen] = TOLOWER (op_start[nlen]);
+ nlen++;
+ if (nlen == sizeof (name) - 1)
+ break;
+ }
+ name[nlen] = 0;
+
+ if (nlen == 0)
+ return -1;
+
+ /* Find the first opcode with the proper name. */
+ *opcode = (struct d10v_opcode *) hash_find (d10v_hash, name);
+ if (*opcode == NULL)
+ return -1;
+
+ save = input_line_pointer;
+ input_line_pointer = (char *) op_end;
+ *opcode = find_opcode (*opcode, myops);
+ if (*opcode == 0)
+ return -1;
+ input_line_pointer = save;
+
+ return build_insn ((*opcode), myops, 0);
+}
+
/* If while processing a fixup, a reloc really needs to be created.
Then it is done here. */
arelent *
-tc_gen_reloc (seg, fixp)
- asection *seg ATTRIBUTE_UNUSED;
- fixS *fixp;
+tc_gen_reloc (asection *seg ATTRIBUTE_UNUSED, fixS *fixp)
{
arelent *reloc;
- reloc = (arelent *) xmalloc (sizeof (arelent));
- reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
+ reloc = XNEW (arelent);
+ reloc->sym_ptr_ptr = XNEW (asymbol *);
*reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
reloc->howto = bfd_reloc_type_lookup (stdoutput, fixp->fx_r_type);
}
int
-md_estimate_size_before_relax (fragp, seg)
- fragS *fragp ATTRIBUTE_UNUSED;
- asection *seg ATTRIBUTE_UNUSED;
+md_estimate_size_before_relax (fragS *fragp ATTRIBUTE_UNUSED,
+ asection *seg ATTRIBUTE_UNUSED)
{
abort ();
return 0;
}
long
-md_pcrel_from_section (fixp, sec)
- fixS *fixp;
- segT sec;
+md_pcrel_from_section (fixS *fixp, segT sec)
{
if (fixp->fx_addsy != (symbolS *) NULL
&& (!S_IS_DEFINED (fixp->fx_addsy)
}
void
-md_apply_fix3 (fixP, valP, seg)
- fixS *fixP;
- valueT *valP;
- segT seg ATTRIBUTE_UNUSED;
+md_apply_fix (fixS *fixP, valueT *valP, segT seg ATTRIBUTE_UNUSED)
{
char *where;
unsigned long insn;
symbol, then ignore the offset.
XXX - Do we have to worry about branches to a symbol + offset ? */
if (fixP->fx_addsy != NULL
- && S_IS_EXTERN (fixP->fx_addsy) )
+ && S_IS_EXTERNAL (fixP->fx_addsy) )
{
segT fseg = S_GET_SEGMENT (fixP->fx_addsy);
segment_info_type *segf = seg_info(fseg);
if ( segf && segf->sym != fixP->fx_addsy)
value = 0;
}
- /* Drop through. */
+ /* Fall through. */
case BFD_RELOC_D10V_18:
/* Instruction addresses are always right-shifted by 2. */
value >>= AT_WORD_RIGHT_SHIFT;
case BFD_RELOC_16:
bfd_putb16 ((bfd_vma) value, (unsigned char *) where);
break;
+ case BFD_RELOC_8:
+ *where = value;
+ break;
case BFD_RELOC_VTABLE_INHERIT:
case BFD_RELOC_VTABLE_ENTRY:
NOTE: invoked by various macros such as md_cleanup: see. */
int
-d10v_cleanup ()
+d10v_cleanup (void)
{
segT seg;
subsegT subseg;
return 1;
}
+void
+d10v_frob_label (symbolS *lab)
+{
+ d10v_cleanup ();
+ symbol_set_frag (lab, frag_now);
+ S_SET_VALUE (lab, (valueT) frag_now_fix ());
+ dwarf2_emit_label (lab);
+}
+
/* Like normal .word, except support @word.
Clobbers input_line_pointer, checks end-of-line. */
static void
-d10v_dot_word (dummy)
- int dummy ATTRIBUTE_UNUSED;
+d10v_dot_word (int dummy ATTRIBUTE_UNUSED)
{
expressionS exp;
char *p;
From expr.c. */
void
-md_operand (expressionP)
- expressionS *expressionP;
+md_operand (expressionS *expressionP)
{
if (*input_line_pointer == '#' && ! do_not_ignore_hash)
{
}
bfd_boolean
-d10v_fix_adjustable (fixP)
- fixS *fixP;
+d10v_fix_adjustable (fixS *fixP)
{
/* We need the symbol name for the VTABLE entries. */
if (fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
return 1;
}
+
+/* The target specific pseudo-ops which we support. */
+const pseudo_typeS md_pseudo_table[] =
+{
+ { "word", d10v_dot_word, 2 },
+ { NULL, NULL, 0 }
+};
+
+void
+md_assemble (char *str)
+{
+ /* etype is saved extype. For multi-line instructions. */
+ packing_type extype = PACK_UNSPEC; /* Parallel, etc. */
+ struct d10v_opcode *opcode;
+ unsigned long insn;
+ char *str2;
+
+ if (etype == PACK_UNSPEC)
+ {
+ /* Look for the special multiple instruction separators. */
+ str2 = strstr (str, "||");
+ if (str2)
+ extype = PACK_PARALLEL;
+ else
+ {
+ str2 = strstr (str, "->");
+ if (str2)
+ extype = PACK_LEFT_RIGHT;
+ else
+ {
+ str2 = strstr (str, "<-");
+ if (str2)
+ extype = PACK_RIGHT_LEFT;
+ }
+ }
+
+ /* str2 points to the separator, if there is one. */
+ if (str2)
+ {
+ *str2 = 0;
+
+ /* If two instructions are present and we already have one saved,
+ then first write out the saved one. */
+ d10v_cleanup ();
+
+ /* Assemble first instruction and save it. */
+ prev_insn = do_assemble (str, &prev_opcode);
+ prev_seg = now_seg;
+ prev_subseg = now_subseg;
+ if (prev_insn == (unsigned long) -1)
+ as_fatal (_("can't find previous opcode "));
+ fixups = fixups->next;
+ str = str2 + 2;
+ }
+ }
+
+ insn = do_assemble (str, &opcode);
+ if (insn == (unsigned long) -1)
+ {
+ if (extype != PACK_UNSPEC)
+ etype = extype;
+ else
+ as_bad (_("could not assemble: %s"), str);
+ return;
+ }
+
+ if (etype != PACK_UNSPEC)
+ {
+ extype = etype;
+ etype = PACK_UNSPEC;
+ }
+
+ /* If this is a long instruction, write it and any previous short
+ instruction. */
+ if (opcode->format & LONG_OPCODE)
+ {
+ if (extype != PACK_UNSPEC)
+ as_fatal (_("Unable to mix instructions as specified"));
+ d10v_cleanup ();
+ write_long (insn, fixups);
+ prev_opcode = NULL;
+ return;
+ }
+
+ if (prev_opcode
+ && prev_seg
+ && ((prev_seg != now_seg) || (prev_subseg != now_subseg)))
+ d10v_cleanup ();
+
+ if (prev_opcode
+ && (0 == write_2_short (prev_opcode, prev_insn, opcode, insn, extype,
+ fixups)))
+ {
+ /* No instructions saved. */
+ prev_opcode = NULL;
+ }
+ else
+ {
+ if (extype != PACK_UNSPEC)
+ as_fatal (_("Unable to mix instructions as specified"));
+ /* Save last instruction so it may be packed on next pass. */
+ prev_opcode = opcode;
+ prev_insn = insn;
+ prev_seg = now_seg;
+ prev_subseg = now_subseg;
+ fixups = fixups->next;
+ }
+}
+