/* tc-d30v.c -- Assembler code for the Mitsubishi D30V
- Copyright (C) 1997, 1998, 1999, 2000 Free Software Foundation.
+ Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2005, 2006, 2007
+ Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ the Free Software Foundation; either version 3, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to
- the Free Software Foundation, 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ the Free Software Foundation, 51 Franklin Street - Fifth Floor,
+ Boston, MA 02110-1301, USA. */
-#include <stdio.h>
-#include <ctype.h>
#include "as.h"
-#include "subsegs.h"
+#include "safe-ctype.h"
+#include "subsegs.h"
#include "opcode/d30v.h"
-const char comment_chars[] = ";";
-const char line_comment_chars[] = "#";
+const char comment_chars[] = ";";
+const char line_comment_chars[] = "#";
const char line_separator_chars[] = "";
-const char *md_shortopts = "OnNcC";
-const char EXP_CHARS[] = "eE";
-const char FLT_CHARS[] = "dD";
+const char *md_shortopts = "OnNcC";
+const char EXP_CHARS[] = "eE";
+const char FLT_CHARS[] = "dD";
#if HAVE_LIMITS_H
#include <limits.h>
/* EXEC types. */
typedef enum _exec_type
{
- EXEC_UNKNOWN, /* no order specified */
- EXEC_PARALLEL, /* done in parallel (FM=00) */
- EXEC_SEQ, /* sequential (FM=01) */
- EXEC_REVSEQ /* reverse sequential (FM=10) */
+ EXEC_UNKNOWN, /* No order specified. */
+ EXEC_PARALLEL, /* Done in parallel (FM=00). */
+ EXEC_SEQ, /* Sequential (FM=01). */
+ EXEC_REVSEQ /* Reverse sequential (FM=10). */
} exec_type_enum;
-/* fixups */
-#define MAX_INSN_FIXUPS (5)
+/* Fixups. */
+#define MAX_INSN_FIXUPS 5
+
struct d30v_fixup
{
expressionS exp;
/* The flag_explicitly_parallel is true iff the instruction being assembled
has been explicitly written as a parallel short-instruction pair by the
- human programmer. It is used in parallel_ok() to distinguish between
+ human programmer. It is used in parallel_ok () to distinguish between
those dangerous parallelizations attempted by the human, which are to be
allowed, and those attempted by the assembler, which are not. It is set
- from md_assemble(). */
-static int flag_explicitly_parallel = 0;
+ from md_assemble (). */
+static int flag_explicitly_parallel = 0;
static int flag_xp_state = 0;
/* Whether current and previous left sub-instruction disables
static segT d30v_current_align_seg;
/* The last seen label in the current section. This is used to auto-align
- labels preceeding instructions. */
+ labels preceding instructions. */
static symbolS *d30v_last_label;
-/* Two nops */
+/* Two nops. */
#define NOP_LEFT ((long long) NOP << 32)
#define NOP_RIGHT ((long long) NOP)
#define NOP2 (FM00 | NOP_LEFT | NOP_RIGHT)
-/* local functions */
-static int reg_name_search PARAMS ((char *name));
-static int register_name PARAMS ((expressionS *expressionP));
-static int check_range PARAMS ((unsigned long num, int bits, int flags));
-static int postfix PARAMS ((char *p));
-static bfd_reloc_code_real_type get_reloc PARAMS ((struct d30v_operand *op, int rel_flag));
-static int get_operands PARAMS ((expressionS exp[], int cmp_hack));
-static struct d30v_format *find_format PARAMS ((struct d30v_opcode *opcode,
- expressionS ops[],int fsize, int cmp_hack));
-static long long build_insn PARAMS ((struct d30v_insn *opcode, expressionS *opers));
-static void write_long PARAMS ((struct d30v_insn *opcode, long long insn, Fixups *fx));
-static void write_1_short PARAMS ((struct d30v_insn *opcode, long long insn,
- Fixups *fx, int use_sequential));
-static int write_2_short PARAMS ((struct d30v_insn *opcode1, long long insn1,
- struct d30v_insn *opcode2, long long insn2, exec_type_enum exec_type, Fixups *fx));
-static long long do_assemble PARAMS ((char *str, struct d30v_insn *opcode,
- int shortp, int is_parallel));
-static int parallel_ok PARAMS ((struct d30v_insn *opcode1, unsigned long insn1,
- struct d30v_insn *opcode2, unsigned long insn2,
- exec_type_enum exec_type));
-static void d30v_number_to_chars PARAMS ((char *buf, long long value, int nbytes));
-static void check_size PARAMS ((long value, int bits, char *file, int line));
-static void d30v_align PARAMS ((int, char *, symbolS *));
-static void s_d30v_align PARAMS ((int));
-static void s_d30v_text PARAMS ((int));
-static void s_d30v_data PARAMS ((int));
-static void s_d30v_section PARAMS ((int));
-
-struct option md_longopts[] = {
+struct option md_longopts[] =
+{
{NULL, no_argument, NULL, 0}
};
-size_t md_longopts_size = sizeof(md_longopts);
-
-/* The target specific pseudo-ops which we support. */
-const pseudo_typeS md_pseudo_table[] =
-{
- { "word", cons, 4 },
- { "hword", cons, 2 },
- { "align", s_d30v_align, 0 },
- { "text", s_d30v_text, 0 },
- { "data", s_d30v_data, 0 },
- { "section", s_d30v_section, 0 },
- { "section.s", s_d30v_section, 0 },
- { "sect", s_d30v_section, 0 },
- { "sect.s", s_d30v_section, 0 },
- { NULL, NULL, 0 }
-};
+size_t md_longopts_size = sizeof (md_longopts);
/* Opcode hash table. */
static struct hash_control *d30v_hash;
-/* reg_name_search does a binary search of the pre_defined_registers
- array to see if "name" is a valid regiter name. Returns the register
- number from the array on success, or -1 on failure. */
+/* Do a binary search of the pre_defined_registers array to see if
+ NAME is a valid regiter name. Return the register number from the
+ array on success, or -1 on failure. */
static int
-reg_name_search (name)
- char *name;
+reg_name_search (char *name)
{
int middle, low, high;
int cmp;
as_warn (_("Register name %s conflicts with symbol of the same name"),
name);
}
-
+
return pre_defined_registers[middle].value;
}
}
while (low <= high);
-
+
return -1;
}
-/* register_name() checks the string at input_line_pointer
- to see if it is a valid register name. */
+/* Check the string at input_line_pointer to see if it is a valid
+ register name. */
static int
-register_name (expressionP)
- expressionS *expressionP;
+register_name (expressionS *expressionP)
{
int reg_number;
char c, *p = input_line_pointer;
-
- while (*p && *p!='\n' && *p!='\r' && *p !=',' && *p!=' ' && *p!=')')
+
+ while (*p && *p != '\n' && *p != '\r' && *p != ',' && *p != ' ' && *p != ')')
p++;
c = *p;
if (c)
*p++ = 0;
- /* look to see if it's in the register table */
+ /* Look to see if it's in the register table. */
reg_number = reg_name_search (input_line_pointer);
- if (reg_number >= 0)
+ if (reg_number >= 0)
{
expressionP->X_op = O_register;
- /* temporarily store a pointer to the string here */
- expressionP->X_op_symbol = (symbolS *)input_line_pointer;
+ /* Temporarily store a pointer to the string here. */
+ expressionP->X_op_symbol = (symbolS *) input_line_pointer;
expressionP->X_add_number = reg_number;
input_line_pointer = p;
return 1;
}
if (c)
- *(p-1) = c;
+ *(p - 1) = c;
return 0;
}
-
static int
-check_range (num, bits, flags)
- unsigned long num;
- int bits;
- int flags;
+check_range (unsigned long num, int bits, int flags)
{
long min, max;
/* Don't bother checking 32-bit values. */
if (bits == 32)
{
- if (sizeof(unsigned long) * CHAR_BIT == 32)
- return 0;
+ if (sizeof (unsigned long) * CHAR_BIT == 32)
+ return 0;
/* We don't record signed or unsigned for 32-bit quantities.
Allow either. */
- min = -((unsigned long)1 << (bits - 1));
- max = ((unsigned long)1 << bits) - 1;
- return (long)num < min || (long)num > max;
+ min = -((unsigned long) 1 << (bits - 1));
+ max = ((unsigned long) 1 << bits) - 1;
+ return (long) num < min || (long) num > max;
}
if (flags & OPERAND_SHIFT)
{
- /* We know that all shifts are right by three bits.... */
-
+ /* We know that all shifts are right by three bits. */
+ num >>= 3;
+
if (flags & OPERAND_SIGNED)
- num = (unsigned long) ( (long) num >= 0)
- ? ( ((long) num) >> 3 )
- : ( (num >> 3) | ~(~(unsigned long)0 >> 3) );
- else
- num >>= 3;
+ {
+ unsigned long sign_bit = ((unsigned long) -1L >> 4) + 1;
+ num = (num ^ sign_bit) - sign_bit;
+ }
}
if (flags & OPERAND_SIGNED)
{
- max = ((unsigned long)1 << (bits - 1)) - 1;
- min = - ((unsigned long)1 << (bits - 1));
- return (long)num > max || (long)num < min;
+ max = ((unsigned long) 1 << (bits - 1)) - 1;
+ min = - ((unsigned long) 1 << (bits - 1));
+ return (long) num > max || (long) num < min;
}
else
{
- max = ((unsigned long)1 << bits) - 1;
- min = 0;
- return num > max || num < min;
+ max = ((unsigned long) 1 << bits) - 1;
+ return num > (unsigned long) max;
}
}
-
void
-md_show_usage (stream)
- FILE *stream;
+md_show_usage (FILE *stream)
{
fprintf (stream, _("\nD30V options:\n\
-O Make adjacent short instructions parallel if possible.\n\
}
int
-md_parse_option (c, arg)
- int c;
- char *arg;
+md_parse_option (int c, char *arg ATTRIBUTE_UNUSED)
{
switch (c)
{
- /* Optimize. Will attempt to parallelize operations */
+ /* Optimize. Will attempt to parallelize operations. */
case 'O':
Optimizing = 1;
break;
case 'C':
warn_register_name_conflicts = 0;
break;
-
+
default:
return 0;
}
}
symbolS *
-md_undefined_symbol (name)
- char *name;
+md_undefined_symbol (char *name ATTRIBUTE_UNUSED)
{
return 0;
}
-/* Turn a string in input_line_pointer into a floating point constant of type
- type, and store the appropriate bytes in *litP. The number of LITTLENUMS
- emitted is stored in *sizeP . An error message is returned, or NULL on OK.
- */
+/* Turn a string in input_line_pointer into a floating point constant
+ of type TYPE, and store the appropriate bytes in *LITP. The number
+ of LITTLENUMS emitted is stored in *SIZEP. An error message is
+ returned, or NULL on OK. */
+
char *
-md_atof (type, litP, sizeP)
- int type;
- char *litP;
- int *sizeP;
+md_atof (int type, char *litP, int *sizeP)
{
int prec;
LITTLENUM_TYPE words[4];
char *t;
int i;
-
+
switch (type)
{
case 'f':
t = atof_ieee (input_line_pointer, type, words);
if (t)
input_line_pointer = t;
-
+
*sizeP = prec * 2;
-
+
for (i = 0; i < prec; i++)
{
md_number_to_chars (litP, (valueT) words[i], 2);
- litP += 2;
+ litP += 2;
}
return NULL;
}
void
-md_convert_frag (abfd, sec, fragP)
- bfd *abfd;
- asection *sec;
- fragS *fragP;
+md_convert_frag (bfd *abfd ATTRIBUTE_UNUSED,
+ asection *sec ATTRIBUTE_UNUSED,
+ fragS *fragP ATTRIBUTE_UNUSED)
{
abort ();
}
valueT
-md_section_align (seg, addr)
- asection *seg;
- valueT addr;
+md_section_align (asection *seg, valueT addr)
{
int align = bfd_get_section_alignment (stdoutput, seg);
return ((addr + (1 << align) - 1) & (-1 << align));
}
-
void
-md_begin ()
+md_begin (void)
{
- struct d30v_opcode * opcode;
+ struct d30v_opcode *opcode;
d30v_hash = hash_new ();
- /* Insert opcode names into a hash table. */
- for (opcode = (struct d30v_opcode *)d30v_opcode_table; opcode->name; opcode++)
+ /* Insert opcode names into a hash table. */
+ for (opcode = (struct d30v_opcode *) d30v_opcode_table; opcode->name; opcode++)
hash_insert (d30v_hash, opcode->name, (char *) opcode);
fixups = &FixUps[0];
d30v_current_align_seg = now_seg;
}
+/* Remove the postincrement or postdecrement operator ( '+' or '-' )
+ from an expression. */
-/* this function removes the postincrement or postdecrement
- operator ( '+' or '-' ) from an expression */
-
-static int postfix (p)
- char *p;
+static int
+postfix (char *p)
{
- while (*p != '-' && *p != '+')
+ while (*p != '-' && *p != '+')
{
- if (*p==0 || *p=='\n' || *p=='\r' || *p==' ' || *p==',')
+ if (*p == 0 || *p == '\n' || *p == '\r' || *p == ' ' || *p == ',')
break;
p++;
}
- if (*p == '-')
+ if (*p == '-')
{
*p = ' ';
- return (-1);
+ return -1;
}
- if (*p == '+')
+
+ if (*p == '+')
{
*p = ' ';
- return (1);
+ return 1;
}
- return (0);
+ return 0;
}
-
-static bfd_reloc_code_real_type
-get_reloc (op, rel_flag)
- struct d30v_operand *op;
- int rel_flag;
+static bfd_reloc_code_real_type
+get_reloc (struct d30v_operand *op, int rel_flag)
{
switch (op->bits)
{
}
}
-/* get_operands parses a string of operands and returns
- an array of expressions */
+/* Parse a string of operands and return an array of expressions. */
static int
-get_operands (exp, cmp_hack)
- expressionS exp[];
- int cmp_hack;
+get_operands (expressionS exp[], int cmp_hack)
{
char *p = input_line_pointer;
int numops = 0;
exp[numops++].X_add_number = cmp_hack - 1;
}
- while (*p)
+ while (*p)
{
- while (*p == ' ' || *p == '\t' || *p == ',')
+ while (*p == ' ' || *p == '\t' || *p == ',')
p++;
- if (*p==0 || *p=='\n' || *p=='\r')
+
+ if (*p == 0 || *p == '\n' || *p == '\r')
break;
-
- if (*p == '@')
+
+ if (*p == '@')
{
p++;
exp[numops].X_op = O_absent;
- if (*p == '(')
+ if (*p == '(')
{
p++;
exp[numops].X_add_number = OPERAND_ATPAR;
post = postfix (p);
}
- else if (*p == '-')
+ else if (*p == '-')
{
p++;
exp[numops].X_add_number = OPERAND_ATMINUS;
continue;
}
- if (*p == ')')
+ if (*p == ')')
{
- /* just skip the trailing paren */
+ /* Just skip the trailing paren. */
p++;
continue;
}
input_line_pointer = p;
- /* check to see if it might be a register name */
+ /* Check to see if it might be a register name. */
if (!register_name (&exp[numops]))
{
- /* parse as an expression */
+ /* Parse as an expression. */
expression (&exp[numops]);
}
- if (exp[numops].X_op == O_illegal)
+ if (exp[numops].X_op == O_illegal)
as_bad (_("illegal operand"));
- else if (exp[numops].X_op == O_absent)
+ else if (exp[numops].X_op == O_absent)
as_bad (_("missing operand"));
numops++;
p = input_line_pointer;
- switch (post)
+ switch (post)
{
- case -1: /* postdecrement mode */
+ case -1:
+ /* Postdecrement mode. */
exp[numops].X_op = O_absent;
exp[numops++].X_add_number = OPERAND_MINUS;
break;
- case 1: /* postincrement mode */
+ case 1:
+ /* Postincrement mode. */
exp[numops].X_op = O_absent;
exp[numops++].X_add_number = OPERAND_PLUS;
break;
}
exp[numops].X_op = 0;
- return (numops);
+
+ return numops;
}
-/* build_insn generates the instruction. It does everything */
-/* but write the FM bits. */
+/* Generate the instruction.
+ It does everything but write the FM bits. */
static long long
-build_insn (opcode, opers)
- struct d30v_insn *opcode;
- expressionS *opers;
+build_insn (struct d30v_insn *opcode, expressionS *opers)
{
int i, length, bits, shift, flags;
- unsigned long number, id=0;
+ unsigned long number, id = 0;
long long insn;
struct d30v_opcode *op = opcode->op;
struct d30v_format *form = opcode->form;
- insn = opcode->ecc << 28 | op->op1 << 25 | op->op2 << 20 | form->modifier << 18;
+ insn =
+ opcode->ecc << 28 | op->op1 << 25 | op->op2 << 20 | form->modifier << 18;
- for (i=0; form->operands[i]; i++)
- {
+ for (i = 0; form->operands[i]; i++)
+ {
flags = d30v_operand_table[form->operands[i]].flags;
- /* must be a register or number */
- if (!(flags & OPERAND_REG) && !(flags & OPERAND_NUM) &&
- !(flags & OPERAND_NAME) && !(flags & OPERAND_SPECIAL))
+ /* Must be a register or number. */
+ if (!(flags & OPERAND_REG) && !(flags & OPERAND_NUM)
+ && !(flags & OPERAND_NAME) && !(flags & OPERAND_SPECIAL))
continue;
bits = d30v_operand_table[form->operands[i]].bits;
number = 0;
if (flags & OPERAND_REG)
{
- /* check for mvfsys or mvtsys control registers */
+ /* Check for mvfsys or mvtsys control registers. */
if (flags & OPERAND_CONTROL && (number & 0x7f) > MAX_CONTROL_REG)
{
- /* PSWL or PSWH */
+ /* PSWL or PSWH. */
id = (number & 0x7f) - MAX_CONTROL_REG;
number = 0;
}
else if (number & OPERAND_FLAG)
- {
- id = 3; /* number is a flag register */
- }
+ /* NUMBER is a flag register. */
+ id = 3;
+
number &= 0x7F;
}
else if (flags & OPERAND_SPECIAL)
- {
- number = id;
- }
+ number = id;
- if (opers[i].X_op != O_register && opers[i].X_op != O_constant && !(flags & OPERAND_NAME))
+ if (opers[i].X_op != O_register && opers[i].X_op != O_constant
+ && !(flags & OPERAND_NAME))
{
- /* now create a fixup */
-
+ /* Now create a fixup. */
if (fixups->fc >= MAX_INSN_FIXUPS)
as_fatal (_("too many fixups"));
- fixups->fix[fixups->fc].reloc =
- get_reloc ((struct d30v_operand *)&d30v_operand_table[form->operands[i]], op->reloc_flag);
+ fixups->fix[fixups->fc].reloc =
+ get_reloc ((struct d30v_operand *) &d30v_operand_table[form->operands[i]], op->reloc_flag);
fixups->fix[fixups->fc].size = 4;
fixups->fix[fixups->fc].exp = opers[i];
fixups->fix[fixups->fc].operand = form->operands[i];
(fixups->fc)++;
}
- /* truncate to the proper number of bits */
+ /* Truncate to the proper number of bits. */
if ((opers[i].X_op == O_constant) && check_range (number, bits, flags))
- as_bad (_("operand out of range: %d"),number);
+ as_bad (_("operand out of range: %ld"), number);
if (bits < 31)
number &= 0x7FFFFFFF >> (31 - bits);
if (flags & OPERAND_SHIFT)
number >>= 3;
if (bits == 32)
{
- /* it's a LONG instruction */
- insn |= ((number & 0xffffffff) >> 26); /* top 6 bits */
- insn <<= 32; /* shift the first word over */
- insn |= ((number & 0x03FC0000) << 2); /* next 8 bits */
- insn |= number & 0x0003FFFF; /* bottom 18 bits */
+ /* It's a LONG instruction. */
+ insn |= ((number & 0xffffffff) >> 26); /* Top 6 bits. */
+ insn <<= 32; /* Shift the first word over. */
+ insn |= ((number & 0x03FC0000) << 2); /* Next 8 bits. */
+ insn |= number & 0x0003FFFF; /* Bottom 18 bits. */
}
else
insn |= number << shift;
}
+
return insn;
}
+static void
+d30v_number_to_chars (char *buf, /* Return 'nbytes' of chars here. */
+ long long value, /* The value of the bits. */
+ int n) /* Number of bytes in the output. */
+{
+ while (n--)
+ {
+ buf[n] = value & 0xff;
+ value >>= 8;
+ }
+}
+
+/* Write out a long form instruction. */
-/* write out a long form instruction */
static void
-write_long (opcode, insn, fx)
- struct d30v_insn *opcode;
- long long insn;
- Fixups *fx;
+write_long (struct d30v_insn *opcode ATTRIBUTE_UNUSED,
+ long long insn,
+ Fixups *fx)
{
int i, where;
char *f = frag_more (8);
insn |= FM11;
d30v_number_to_chars (f, insn, 8);
- for (i=0; i < fx->fc; i++)
+ for (i = 0; i < fx->fc; i++)
{
if (fx->fix[i].reloc)
- {
- where = f - frag_now->fr_literal;
- fix_new_exp (frag_now,
- where,
- fx->fix[i].size,
- &(fx->fix[i].exp),
- fx->fix[i].pcrel,
- fx->fix[i].reloc);
+ {
+ where = f - frag_now->fr_literal;
+ fix_new_exp (frag_now, where, fx->fix[i].size, &(fx->fix[i].exp),
+ fx->fix[i].pcrel, fx->fix[i].reloc);
}
}
+
fx->fc = 0;
}
-
/* Write out a short form instruction by itself. */
+
static void
-write_1_short (opcode, insn, fx, use_sequential)
- struct d30v_insn *opcode;
- long long insn;
- Fixups *fx;
- int use_sequential;
+write_1_short (struct d30v_insn *opcode,
+ long long insn,
+ Fixups *fx,
+ int use_sequential)
{
char *f = frag_more (8);
int i, where;
as_warn (_("%s NOP inserted"), use_sequential ?
_("sequential") : _("parallel"));
- /* The other container needs to be NOP. */
+ /* The other container needs to be NOP. */
if (use_sequential)
{
/* Use a sequential NOP rather than a parallel one,
as the current instruction is a FLAG_MUL32 type one
and the next instruction is a load. */
-
+
/* According to 4.3.1: for FM=01, sub-instructions performed
- only by IU cannot be encoded in L-container. */
-
+ only by IU cannot be encoded in L-container. */
if (opcode->op->unit == IU)
- insn |= FM10 | NOP_LEFT; /* right then left */
+ /* Right then left. */
+ insn |= FM10 | NOP_LEFT;
else
- insn = FM01 | (insn << 32) | NOP_RIGHT; /* left then right */
+ /* Left then right. */
+ insn = FM01 | (insn << 32) | NOP_RIGHT;
}
else
{
/* According to 4.3.1: for FM=00, sub-instructions performed
- only by IU cannot be encoded in L-container. */
-
+ only by IU cannot be encoded in L-container. */
if (opcode->op->unit == IU)
- insn |= FM00 | NOP_LEFT; /* right container */
+ /* Right container. */
+ insn |= FM00 | NOP_LEFT;
else
- insn = FM00 | (insn << 32) | NOP_RIGHT; /* left container */
+ /* Left container. */
+ insn = FM00 | (insn << 32) | NOP_RIGHT;
}
d30v_number_to_chars (f, insn, 8);
- for (i=0; i < fx->fc; i++)
+ for (i = 0; i < fx->fc; i++)
{
if (fx->fix[i].reloc)
- {
- where = f - frag_now->fr_literal;
+ {
+ where = f - frag_now->fr_literal;
fix_new_exp (frag_now,
- where,
+ where,
fx->fix[i].size,
&(fx->fix[i].exp),
fx->fix[i].pcrel,
fx->fix[i].reloc);
}
}
- fx->fc = 0;
-}
-
-/* Write out a short form instruction if possible.
- Return number of instructions not written out. */
-static int
-write_2_short (opcode1, insn1, opcode2, insn2, exec_type, fx)
- struct d30v_insn *opcode1, *opcode2;
- long long insn1, insn2;
- exec_type_enum exec_type;
- Fixups *fx;
-{
- long long insn = NOP2;
- char *f;
- int i,j, where;
-
- if (exec_type == EXEC_SEQ
- && (opcode1->op->flags_used & (FLAG_JMP | FLAG_JSR))
- && ((opcode1->op->flags_used & FLAG_DELAY) == 0)
- && ((opcode1->ecc == ECC_AL) || ! Optimizing))
- {
- /* Unconditional, non-delayed branches kill instructions in
- the right bin. Conditional branches don't always but if
- we are not optimizing, then we have been asked to produce
- an error about such constructs. For the purposes of this
- test, subroutine calls are considered to be branches. */
- write_1_short (opcode1, insn1, fx->next, false);
- return 1;
- }
-
- /* Note: we do not have to worry about subroutine calls occuring
- in the right hand container. The return address is always
- aligned to the next 64 bit boundary, be that 64 or 32 bit away. */
-
- switch (exec_type)
- {
- case EXEC_UNKNOWN: /* Order not specified. */
- if (Optimizing
- && parallel_ok (opcode1, insn1, opcode2, insn2, exec_type)
- && ! ( (opcode1->op->unit == EITHER_BUT_PREFER_MU
- || opcode1->op->unit == MU)
- &&
- ( opcode2->op->unit == EITHER_BUT_PREFER_MU
- || opcode2->op->unit == MU)))
- {
- /* parallel */
- exec_type = EXEC_PARALLEL;
-
- if (opcode1->op->unit == IU
- || opcode2->op->unit == MU
- || opcode2->op->unit == EITHER_BUT_PREFER_MU)
- insn = FM00 | (insn2 << 32) | insn1;
- else
- {
- insn = FM00 | (insn1 << 32) | insn2;
- fx = fx->next;
- }
- }
- else if ((opcode1->op->flags_used & (FLAG_JMP | FLAG_JSR)
- && ((opcode1->op->flags_used & FLAG_DELAY) == 0))
- || opcode1->op->flags_used & FLAG_RP)
- {
- /* We must emit (non-delayed) branch type instructions
- on their own with nothing in the right container. */
- /* We must treat repeat instructions likewise, since the
- following instruction has to be separate from the repeat
- in order to be repeated. */
- write_1_short (opcode1, insn1, fx->next, false);
- return 1;
- }
- else if (prev_left_kills_right_p)
- {
- /* The left instruction kils the right slot, so we
- must leave it empty. */
- write_1_short (opcode1, insn1, fx->next, false);
- return 1;
- }
- else if (opcode1->op->unit == IU)
- {
- if (opcode2->op->unit == EITHER_BUT_PREFER_MU)
- {
- /* Case 103810 is a request from Mitsubishi that opcodes
- with EITHER_BUT_PREFER_MU should not be executed in
- reverse sequential order. */
- write_1_short (opcode1, insn1, fx->next, false);
- return 1;
- }
-
- /* reverse sequential */
- insn = FM10 | (insn2 << 32) | insn1;
- exec_type = EXEC_REVSEQ;
- }
- else
- {
- /* sequential */
- insn = FM01 | (insn1 << 32) | insn2;
- fx = fx->next;
- exec_type = EXEC_SEQ;
- }
- break;
-
- case EXEC_PARALLEL: /* parallel */
- flag_explicitly_parallel = flag_xp_state;
- if (! parallel_ok (opcode1, insn1, opcode2, insn2, exec_type))
- as_bad (_("Instructions may not be executed in parallel"));
- else if (opcode1->op->unit == IU)
- {
- if (opcode2->op->unit == IU)
- as_bad (_("Two IU instructions may not be executed in parallel"));
- as_warn (_("Swapping instruction order"));
- insn = FM00 | (insn2 << 32) | insn1;
- }
- else if (opcode2->op->unit == MU)
- {
- if (opcode1->op->unit == MU)
- as_bad (_("Two MU instructions may not be executed in parallel"));
- else if (opcode1->op->unit == EITHER_BUT_PREFER_MU)
- as_warn (_("Executing %s in IU may not work"), opcode1->op->name);
- as_warn (_("Swapping instruction order"));
- insn = FM00 | (insn2 << 32) | insn1;
- }
- else
- {
- if (opcode2->op->unit == EITHER_BUT_PREFER_MU)
- as_warn (_("Executing %s in IU may not work in parallel execution"),
- opcode2->op->name);
-
- insn = FM00 | (insn1 << 32) | insn2;
- fx = fx->next;
- }
- flag_explicitly_parallel = 0;
- break;
-
- case EXEC_SEQ: /* sequential */
- if (opcode1->op->unit == IU)
- as_bad (_("IU instruction may not be in the left container"));
- if (prev_left_kills_right_p)
- as_bad (_("special left instruction `%s' kills instruction "
- "`%s' in right container"),
- opcode1->op->name, opcode2->op->name);
- insn = FM01 | (insn1 << 32) | insn2;
- fx = fx->next;
- break;
-
- case EXEC_REVSEQ: /* reverse sequential */
- if (opcode2->op->unit == MU)
- as_bad (_("MU instruction may not be in the right container"));
- if (opcode1->op->unit == EITHER_BUT_PREFER_MU)
- as_warn (_("Executing %s in reverse serial with %s may not work"),
- opcode1->op->name, opcode2->op->name);
- else if (opcode2->op->unit == EITHER_BUT_PREFER_MU)
- as_warn (_("Executing %s in IU in reverse serial may not work"),
- opcode2->op->name);
- insn = FM10 | (insn1 << 32) | insn2;
- fx = fx->next;
- break;
-
- default:
- as_fatal (_("unknown execution type passed to write_2_short()"));
- }
-
- /* printf ("writing out %llx\n",insn); */
- f = frag_more (8);
- d30v_number_to_chars (f, insn, 8);
-
- /* If the previous instruction was a 32-bit multiply but it is put into a
- parallel container, mark the current instruction as being a 32-bit
- multiply. */
- if (prev_mul32_p && exec_type == EXEC_PARALLEL)
- cur_mul32_p = 1;
-
- for (j=0; j<2; j++)
- {
- for (i=0; i < fx->fc; i++)
- {
- if (fx->fix[i].reloc)
- {
- where = (f - frag_now->fr_literal) + 4*j;
- fix_new_exp (frag_now,
- where,
- fx->fix[i].size,
- &(fx->fix[i].exp),
- fx->fix[i].pcrel,
- fx->fix[i].reloc);
- }
- }
-
- fx->fc = 0;
- fx = fx->next;
- }
-
- return 0;
+ fx->fc = 0;
}
+/* Check 2 instructions and determine if they can be safely
+ executed in parallel. Return 1 if they can be. */
-/* Check 2 instructions and determine if they can be safely */
-/* executed in parallel. Returns 1 if they can be. */
static int
-parallel_ok (op1, insn1, op2, insn2, exec_type)
- struct d30v_insn *op1, *op2;
- unsigned long insn1, insn2;
- exec_type_enum exec_type;
+parallel_ok (struct d30v_insn *op1,
+ unsigned long insn1,
+ struct d30v_insn *op2,
+ unsigned long insn2,
+ exec_type_enum exec_type)
{
int i, j, shift, regno, bits, ecc;
unsigned long flags, mask, flags_set1, flags_set2, flags_used1, flags_used2;
struct d30v_format *f;
struct d30v_opcode *op;
- /* section 4.3: both instructions must not be IU or MU only */
+ /* Section 4.3: Both instructions must not be IU or MU only. */
if ((op1->op->unit == IU && op2->op->unit == IU)
|| (op1->op->unit == MU && op2->op->unit == MU))
return 0;
- /* first instruction must not be a jump to safely optimize, unless this
+ /* First instruction must not be a jump to safely optimize, unless this
is an explicit parallel operation. */
if (exec_type != EXEC_PARALLEL
&& (op1->op->flags_used & (FLAG_JMP | FLAG_JSR)))
|| (op1->ecc == ECC_FX && op2->ecc == ECC_TX)
|| (op1->ecc == ECC_XT && op2->ecc == ECC_XF)
|| (op1->ecc == ECC_XF && op2->ecc == ECC_XT))
- return 1;
+ return 1;
/* [0] r0-r31
[1] r32-r63
- [2] a0, a1, flag registers */
-
+ [2] a0, a1, flag registers. */
for (j = 0; j < 2; j++)
{
if (j == 0)
ecc = op2->ecc;
ins = insn2;
}
+
flag_reg[j] = 0;
mod_reg[j][0] = mod_reg[j][1] = 0;
used_reg[j][0] = used_reg[j][1] = 0;
eg "cmpne f0,r1,0x10 || cmpeq f0, r5, 0x2", so further on we test
for the use of a flag register and set a bit in the mod or used
array appropriately. */
-
mod_reg[j][2] = 0;
used_reg[j][2] = 0;
}
mod_reg[j][2] = (op->flags_set & FLAG_ALL);
used_reg[j][2] = (op->flags_used & FLAG_ALL);
}
-
- /* BSR/JSR always sets R62 */
+
+ /* BSR/JSR always sets R62. */
if (op->flags_used & FLAG_JSR)
- mod_reg[j][1] = (1L << (62-32));
+ mod_reg[j][1] = (1L << (62 - 32));
- /* conditional execution affects the flags_used */
+ /* Conditional execution affects the flags_used. */
switch (ecc)
{
case ECC_TX:
if ((flags & OPERAND_PLUS) || (flags & OPERAND_MINUS))
{
- /* this is a post-increment or post-decrement */
- /* the previous register needs to be marked as modified */
-
- shift = 12 - d30v_operand_table[f->operands[i-1]].position;
+ /* This is a post-increment or post-decrement.
+ The previous register needs to be marked as modified. */
+ shift = 12 - d30v_operand_table[f->operands[i - 1]].position;
regno = (ins >> shift) & 0x3f;
if (regno >= 32)
mod_reg[j][1] |= 1L << (regno - 32);
else if (flags & OPERAND_REG)
{
regno = (ins >> shift) & mask;
- /* the memory write functions don't have a destination register */
+ /* The memory write functions don't have a destination
+ register. */
if ((flags & OPERAND_DEST) && !(op->flags_set & FLAG_MEM))
{
- /* MODIFIED registers and flags */
+ /* MODIFIED registers and flags. */
if (flags & OPERAND_ACC)
{
if (regno == 0)
{
int r, z;
- /* need to check if there are two destination */
- /* registers, for example ld2w */
+ /* Need to check if there are two destination
+ registers, for example ld2w. */
if (flags & OPERAND_2REG)
z = 1;
else
z = 0;
for (r = regno; r <= regno + z; r++)
- {
+ {
if (r >= 32)
mod_reg[j][1] |= 1L << (r - 32);
else
}
else
{
- /* USED, but not modified registers and flags */
+ /* USED, but not modified registers and flags. */
if (flags & OPERAND_ACC)
{
if (regno == 0)
{
int r, z;
- /* need to check if there are two source */
- /* registers, for example st2w */
+ /* Need to check if there are two source
+ registers, for example st2w. */
if (flags & OPERAND_2REG)
z = 1;
else
z = 0;
for (r = regno; r <= regno + z; r++)
- {
+ {
if (r >= 32)
used_reg[j][1] |= 1L << (r - 32);
else
}
}
}
-
+
flags_set1 = op1->op->flags_set;
flags_set2 = op2->op->flags_set;
flags_used1 = op1->op->flags_used;
the right container, and it writes its results last.
However, don't paralellize add followed by addc or sub followed by
subb. */
-
if (mod_reg[0][2] == FLAG_CVVA && mod_reg[1][2] == FLAG_CVVA
&& (used_reg[0][2] & ~flag_reg[0]) == 0
&& (used_reg[1][2] & ~flag_reg[1]) == 0
/* If the second instruction depends on the first, we obviously
cannot parallelize. Note, the mod flag implies use, so
check that as well. */
- /* If flag_explicitly_parallel is set, then the case of the
+ /* If flag_explicitly_parallel is set, then the case of the
second instruction using a register the first instruction
modifies is assumed to be okay; we trust the human. We
don't trust the human if both instructions modify the same
register but we do trust the human if they modify the same
- flags. */
+ flags. */
/* We have now been requested not to trust the human if the
instructions modify the same flag registers either. */
if (flag_explicitly_parallel)
return 0;
}
else
- if ((mod_reg[0][j] & (mod_reg[1][j] | used_reg[1][j])) != 0)
+ if ((mod_reg[0][j] & (mod_reg[1][j] | used_reg[1][j])) != 0)
return 0;
}
return 1;
}
+/* Write out a short form instruction if possible.
+ Return number of instructions not written out. */
-/* This is the main entry point for the machine-dependent assembler. str points to a
- machine-dependent instruction. This function is supposed to emit the frags/bytes
- it assembles to. For the D30V, it mostly handles the special VLIW parsing and packing
- and leaves the difficult stuff to do_assemble(). */
-
-static long long prev_insn = -1;
-static struct d30v_insn prev_opcode;
-static subsegT prev_subseg;
-static segT prev_seg = 0;
-
-void
-md_assemble (str)
- char *str;
+static int
+write_2_short (struct d30v_insn *opcode1,
+ long long insn1,
+ struct d30v_insn *opcode2,
+ long long insn2,
+ exec_type_enum exec_type,
+ Fixups *fx)
{
- struct d30v_insn opcode;
- long long insn;
- exec_type_enum extype = EXEC_UNKNOWN; /* execution type; parallel, etc */
- static exec_type_enum etype = EXEC_UNKNOWN; /* saved extype. used for multiline instructions */
- char *str2;
-
- if ((prev_insn != -1) && prev_seg
- && ((prev_seg != now_seg) || (prev_subseg != now_subseg)))
- d30v_cleanup (false);
+ long long insn = NOP2;
+ char *f;
+ int i, j, where;
- if (d30v_current_align < 3)
- d30v_align (3, NULL, d30v_last_label);
- else if (d30v_current_align > 3)
- d30v_current_align = 3;
+ if (exec_type == EXEC_SEQ
+ && (opcode1->op->flags_used & (FLAG_JMP | FLAG_JSR))
+ && ((opcode1->op->flags_used & FLAG_DELAY) == 0)
+ && ((opcode1->ecc == ECC_AL) || ! Optimizing))
+ {
+ /* Unconditional, non-delayed branches kill instructions in
+ the right bin. Conditional branches don't always but if
+ we are not optimizing, then we have been asked to produce
+ an error about such constructs. For the purposes of this
+ test, subroutine calls are considered to be branches. */
+ write_1_short (opcode1, insn1, fx->next, FALSE);
+ return 1;
+ }
+
+ /* Note: we do not have to worry about subroutine calls occurring
+ in the right hand container. The return address is always
+ aligned to the next 64 bit boundary, be that 64 or 32 bit away. */
+ switch (exec_type)
+ {
+ case EXEC_UNKNOWN: /* Order not specified. */
+ if (Optimizing
+ && parallel_ok (opcode1, insn1, opcode2, insn2, exec_type)
+ && ! ( (opcode1->op->unit == EITHER_BUT_PREFER_MU
+ || opcode1->op->unit == MU)
+ &&
+ ( opcode2->op->unit == EITHER_BUT_PREFER_MU
+ || opcode2->op->unit == MU)))
+ {
+ /* Parallel. */
+ exec_type = EXEC_PARALLEL;
+
+ if (opcode1->op->unit == IU
+ || opcode2->op->unit == MU
+ || opcode2->op->unit == EITHER_BUT_PREFER_MU)
+ insn = FM00 | (insn2 << 32) | insn1;
+ else
+ {
+ insn = FM00 | (insn1 << 32) | insn2;
+ fx = fx->next;
+ }
+ }
+ else if ((opcode1->op->flags_used & (FLAG_JMP | FLAG_JSR)
+ && ((opcode1->op->flags_used & FLAG_DELAY) == 0))
+ || opcode1->op->flags_used & FLAG_RP)
+ {
+ /* We must emit (non-delayed) branch type instructions
+ on their own with nothing in the right container. */
+ /* We must treat repeat instructions likewise, since the
+ following instruction has to be separate from the repeat
+ in order to be repeated. */
+ write_1_short (opcode1, insn1, fx->next, FALSE);
+ return 1;
+ }
+ else if (prev_left_kills_right_p)
+ {
+ /* The left instruction kils the right slot, so we
+ must leave it empty. */
+ write_1_short (opcode1, insn1, fx->next, FALSE);
+ return 1;
+ }
+ else if (opcode1->op->unit == IU)
+ {
+ if (opcode2->op->unit == EITHER_BUT_PREFER_MU)
+ {
+ /* Case 103810 is a request from Mitsubishi that opcodes
+ with EITHER_BUT_PREFER_MU should not be executed in
+ reverse sequential order. */
+ write_1_short (opcode1, insn1, fx->next, FALSE);
+ return 1;
+ }
+
+ /* Reverse sequential. */
+ insn = FM10 | (insn2 << 32) | insn1;
+ exec_type = EXEC_REVSEQ;
+ }
+ else
+ {
+ /* Sequential. */
+ insn = FM01 | (insn1 << 32) | insn2;
+ fx = fx->next;
+ exec_type = EXEC_SEQ;
+ }
+ break;
+
+ case EXEC_PARALLEL: /* Parallel. */
+ flag_explicitly_parallel = flag_xp_state;
+ if (! parallel_ok (opcode1, insn1, opcode2, insn2, exec_type))
+ as_bad (_("Instructions may not be executed in parallel"));
+ else if (opcode1->op->unit == IU)
+ {
+ if (opcode2->op->unit == IU)
+ as_bad (_("Two IU instructions may not be executed in parallel"));
+ as_warn (_("Swapping instruction order"));
+ insn = FM00 | (insn2 << 32) | insn1;
+ }
+ else if (opcode2->op->unit == MU)
+ {
+ if (opcode1->op->unit == MU)
+ as_bad (_("Two MU instructions may not be executed in parallel"));
+ else if (opcode1->op->unit == EITHER_BUT_PREFER_MU)
+ as_warn (_("Executing %s in IU may not work"), opcode1->op->name);
+ as_warn (_("Swapping instruction order"));
+ insn = FM00 | (insn2 << 32) | insn1;
+ }
+ else
+ {
+ if (opcode2->op->unit == EITHER_BUT_PREFER_MU)
+ as_warn (_("Executing %s in IU may not work in parallel execution"),
+ opcode2->op->name);
+
+ insn = FM00 | (insn1 << 32) | insn2;
+ fx = fx->next;
+ }
+ flag_explicitly_parallel = 0;
+ break;
+
+ case EXEC_SEQ: /* Sequential. */
+ if (opcode1->op->unit == IU)
+ as_bad (_("IU instruction may not be in the left container"));
+ if (prev_left_kills_right_p)
+ as_bad (_("special left instruction `%s' kills instruction "
+ "`%s' in right container"),
+ opcode1->op->name, opcode2->op->name);
+ insn = FM01 | (insn1 << 32) | insn2;
+ fx = fx->next;
+ break;
+
+ case EXEC_REVSEQ: /* Reverse sequential. */
+ if (opcode2->op->unit == MU)
+ as_bad (_("MU instruction may not be in the right container"));
+ if (opcode1->op->unit == EITHER_BUT_PREFER_MU)
+ as_warn (_("Executing %s in reverse serial with %s may not work"),
+ opcode1->op->name, opcode2->op->name);
+ else if (opcode2->op->unit == EITHER_BUT_PREFER_MU)
+ as_warn (_("Executing %s in IU in reverse serial may not work"),
+ opcode2->op->name);
+ insn = FM10 | (insn1 << 32) | insn2;
+ fx = fx->next;
+ break;
+
+ default:
+ as_fatal (_("unknown execution type passed to write_2_short()"));
+ }
+
+ f = frag_more (8);
+ d30v_number_to_chars (f, insn, 8);
+
+ /* If the previous instruction was a 32-bit multiply but it is put into a
+ parallel container, mark the current instruction as being a 32-bit
+ multiply. */
+ if (prev_mul32_p && exec_type == EXEC_PARALLEL)
+ cur_mul32_p = 1;
+
+ for (j = 0; j < 2; j++)
+ {
+ for (i = 0; i < fx->fc; i++)
+ {
+ if (fx->fix[i].reloc)
+ {
+ where = (f - frag_now->fr_literal) + 4 * j;
+
+ fix_new_exp (frag_now,
+ where,
+ fx->fix[i].size,
+ &(fx->fix[i].exp),
+ fx->fix[i].pcrel,
+ fx->fix[i].reloc);
+ }
+ }
+
+ fx->fc = 0;
+ fx = fx->next;
+ }
+
+ return 0;
+}
+
+/* Get a pointer to an entry in the format table.
+ It must look at all formats for an opcode and use the operands
+ to choose the correct one. Return NULL on error. */
+
+static struct d30v_format *
+find_format (struct d30v_opcode *opcode,
+ expressionS myops[],
+ int fsize,
+ int cmp_hack)
+{
+ int numops, match, index, i = 0, j, k;
+ struct d30v_format *fm;
+
+ if (opcode == NULL)
+ return NULL;
+
+ /* Get all the operands and save them as expressions. */
+ numops = get_operands (myops, cmp_hack);
+
+ while ((index = opcode->format[i++]) != 0)
+ {
+ if (fsize == FORCE_SHORT && index >= LONG)
+ continue;
+
+ if (fsize == FORCE_LONG && index < LONG)
+ continue;
+
+ fm = (struct d30v_format *) &d30v_format_table[index];
+ k = index;
+ while (fm->form == index)
+ {
+ match = 1;
+ /* Now check the operands for compatibility. */
+ for (j = 0; match && fm->operands[j]; j++)
+ {
+ int flags = d30v_operand_table[fm->operands[j]].flags;
+ int bits = d30v_operand_table[fm->operands[j]].bits;
+ int X_op = myops[j].X_op;
+ int num = myops[j].X_add_number;
+
+ if (flags & OPERAND_SPECIAL)
+ break;
+ else if (X_op == O_illegal)
+ match = 0;
+ else if (flags & OPERAND_REG)
+ {
+ if (X_op != O_register
+ || ((flags & OPERAND_ACC) && !(num & OPERAND_ACC))
+ || (!(flags & OPERAND_ACC) && (num & OPERAND_ACC))
+ || ((flags & OPERAND_FLAG) && !(num & OPERAND_FLAG))
+ || (!(flags & (OPERAND_FLAG | OPERAND_CONTROL)) && (num & OPERAND_FLAG))
+ || ((flags & OPERAND_CONTROL)
+ && !(num & (OPERAND_CONTROL | OPERAND_FLAG))))
+ match = 0;
+ }
+ else if (((flags & OPERAND_MINUS)
+ && (X_op != O_absent || num != OPERAND_MINUS))
+ || ((flags & OPERAND_PLUS)
+ && (X_op != O_absent || num != OPERAND_PLUS))
+ || ((flags & OPERAND_ATMINUS)
+ && (X_op != O_absent || num != OPERAND_ATMINUS))
+ || ((flags & OPERAND_ATPAR)
+ && (X_op != O_absent || num != OPERAND_ATPAR))
+ || ((flags & OPERAND_ATSIGN)
+ && (X_op != O_absent || num != OPERAND_ATSIGN)))
+ match = 0;
+ else if (flags & OPERAND_NUM)
+ {
+ /* A number can be a constant or symbol expression. */
+
+ /* If we have found a register name, but that name
+ also matches a symbol, then re-parse the name as
+ an expression. */
+ if (X_op == O_register
+ && symbol_find ((char *) myops[j].X_op_symbol))
+ {
+ input_line_pointer = (char *) myops[j].X_op_symbol;
+ expression (&myops[j]);
+ }
+
+ /* Turn an expression into a symbol for later resolution. */
+ if (X_op != O_absent && X_op != O_constant
+ && X_op != O_symbol && X_op != O_register
+ && X_op != O_big)
+ {
+ symbolS *sym = make_expr_symbol (&myops[j]);
+ myops[j].X_op = X_op = O_symbol;
+ myops[j].X_add_symbol = sym;
+ myops[j].X_add_number = num = 0;
+ }
+
+ if (fm->form >= LONG)
+ {
+ /* If we're testing for a LONG format, either fits. */
+ if (X_op != O_constant && X_op != O_symbol)
+ match = 0;
+ }
+ else if (fm->form < LONG
+ && ((fsize == FORCE_SHORT && X_op == O_symbol)
+ || (fm->form == SHORT_D2 && j == 0)))
+ match = 1;
+
+ /* This is the tricky part. Will the constant or symbol
+ fit into the space in the current format? */
+ else if (X_op == O_constant)
+ {
+ if (check_range (num, bits, flags))
+ match = 0;
+ }
+ else if (X_op == O_symbol
+ && S_IS_DEFINED (myops[j].X_add_symbol)
+ && S_GET_SEGMENT (myops[j].X_add_symbol) == now_seg
+ && opcode->reloc_flag == RELOC_PCREL)
+ {
+ /* If the symbol is defined, see if the value will fit
+ into the form we're considering. */
+ fragS *f;
+ long value;
+
+ /* Calculate the current address by running through the
+ previous frags and adding our current offset. */
+ value = 0;
+ for (f = frchain_now->frch_root; f; f = f->fr_next)
+ value += f->fr_fix + f->fr_offset;
+ value = (S_GET_VALUE (myops[j].X_add_symbol) - value
+ - (obstack_next_free (&frchain_now->frch_obstack)
+ - frag_now->fr_literal));
+ if (check_range (value, bits, flags))
+ match = 0;
+ }
+ else
+ match = 0;
+ }
+ }
+ /* We're only done if the operands matched so far AND there
+ are no more to check. */
+ if (match && myops[j].X_op == 0)
+ {
+ /* Final check - issue a warning if an odd numbered register
+ is used as the first register in an instruction that reads
+ or writes 2 registers. */
+
+ for (j = 0; fm->operands[j]; j++)
+ if (myops[j].X_op == O_register
+ && (myops[j].X_add_number & 1)
+ && (d30v_operand_table[fm->operands[j]].flags & OPERAND_2REG))
+ as_warn (_("Odd numbered register used as target of multi-register instruction"));
+
+ return fm;
+ }
+ fm = (struct d30v_format *) &d30v_format_table[++k];
+ }
+ }
+ return NULL;
+}
+
+/* Assemble a single instruction and return an opcode.
+ Return -1 (an invalid opcode) on error. */
+
+#define NAME_BUF_LEN 20
+
+static long long
+do_assemble (char *str,
+ struct d30v_insn *opcode,
+ int shortp,
+ int is_parallel)
+{
+ char *op_start;
+ char *save;
+ char *op_end;
+ char name[NAME_BUF_LEN];
+ int cmp_hack;
+ int nlen = 0;
+ int fsize = (shortp ? FORCE_SHORT : 0);
+ expressionS myops[6];
+ long long insn;
+
+ /* Drop leading whitespace. */
+ while (*str == ' ')
+ str++;
+
+ /* Find the opcode end. */
+ for (op_start = op_end = str;
+ *op_end
+ && nlen < (NAME_BUF_LEN - 1)
+ && *op_end != '/'
+ && !is_end_of_line[(unsigned char) *op_end] && *op_end != ' ';
+ op_end++)
+ {
+ name[nlen] = TOLOWER (op_start[nlen]);
+ nlen++;
+ }
+
+ if (nlen == 0)
+ return -1;
+
+ name[nlen] = 0;
+
+ /* If there is an execution condition code, handle it. */
+ if (*op_end == '/')
+ {
+ int i = 0;
+ while ((i < ECC_MAX) && strncasecmp (d30v_ecc_names[i], op_end + 1, 2))
+ i++;
+
+ if (i == ECC_MAX)
+ {
+ char tmp[4];
+ strncpy (tmp, op_end + 1, 2);
+ tmp[2] = 0;
+ as_bad (_("unknown condition code: %s"), tmp);
+ return -1;
+ }
+ opcode->ecc = i;
+ op_end += 3;
+ }
+ else
+ opcode->ecc = ECC_AL;
+
+ /* CMP and CMPU change their name based on condition codes. */
+ if (!strncmp (name, "cmp", 3))
+ {
+ int p, i;
+ char **str = (char **) d30v_cc_names;
+ if (name[3] == 'u')
+ p = 4;
+ else
+ p = 3;
+
+ for (i = 1; *str && strncmp (*str, &name[p], 2); i++, str++)
+ ;
+
+ /* cmpu only supports some condition codes. */
+ if (p == 4)
+ {
+ if (i < 3 || i > 6)
+ {
+ name[p + 2] = 0;
+ as_bad (_("cmpu doesn't support condition code %s"), &name[p]);
+ }
+ }
+
+ if (!*str)
+ {
+ name[p + 2] = 0;
+ as_bad (_("unknown condition code: %s"), &name[p]);
+ }
+
+ cmp_hack = i;
+ name[p] = 0;
+ }
+ else
+ cmp_hack = 0;
+
+ /* Need to look for .s or .l. */
+ if (name[nlen - 2] == '.')
+ {
+ switch (name[nlen - 1])
+ {
+ case 's':
+ fsize = FORCE_SHORT;
+ break;
+ case 'l':
+ fsize = FORCE_LONG;
+ break;
+ }
+ name[nlen - 2] = 0;
+ }
+
+ /* Find the first opcode with the proper name. */
+ opcode->op = (struct d30v_opcode *) hash_find (d30v_hash, name);
+ if (opcode->op == NULL)
+ {
+ as_bad (_("unknown opcode: %s"), name);
+ return -1;
+ }
+
+ save = input_line_pointer;
+ input_line_pointer = op_end;
+ while (!(opcode->form = find_format (opcode->op, myops, fsize, cmp_hack)))
+ {
+ opcode->op++;
+ if (opcode->op->name == NULL || strcmp (opcode->op->name, name))
+ {
+ as_bad (_("operands for opcode `%s' do not match any valid format"),
+ name);
+ return -1;
+ }
+ }
+ input_line_pointer = save;
+
+ insn = build_insn (opcode, myops);
+
+ /* Propagate multiply status. */
+ if (insn != -1)
+ {
+ if (is_parallel && prev_mul32_p)
+ cur_mul32_p = 1;
+ else
+ {
+ prev_mul32_p = cur_mul32_p;
+ cur_mul32_p = (opcode->op->flags_used & FLAG_MUL32) != 0;
+ }
+ }
+
+ /* Propagate left_kills_right status. */
+ if (insn != -1)
+ {
+ prev_left_kills_right_p = cur_left_kills_right_p;
+
+ if (opcode->op->flags_set & FLAG_LKR)
+ {
+ cur_left_kills_right_p = 1;
+
+ if (strcmp (opcode->op->name, "mvtsys") == 0)
+ {
+ /* Left kills right for only mvtsys only for
+ PSW/PSWH/PSWL/flags target. */
+ if ((myops[0].X_op == O_register) &&
+ ((myops[0].X_add_number == OPERAND_CONTROL) || /* psw */
+ (myops[0].X_add_number == OPERAND_CONTROL+MAX_CONTROL_REG+2) || /* pswh */
+ (myops[0].X_add_number == OPERAND_CONTROL+MAX_CONTROL_REG+1) || /* pswl */
+ (myops[0].X_add_number == OPERAND_FLAG+0) || /* f0 */
+ (myops[0].X_add_number == OPERAND_FLAG+1) || /* f1 */
+ (myops[0].X_add_number == OPERAND_FLAG+2) || /* f2 */
+ (myops[0].X_add_number == OPERAND_FLAG+3) || /* f3 */
+ (myops[0].X_add_number == OPERAND_FLAG+4) || /* f4 */
+ (myops[0].X_add_number == OPERAND_FLAG+5) || /* f5 */
+ (myops[0].X_add_number == OPERAND_FLAG+6) || /* f6 */
+ (myops[0].X_add_number == OPERAND_FLAG+7))) /* f7 */
+ {
+ cur_left_kills_right_p = 1;
+ }
+ else
+ {
+ /* Other mvtsys target registers don't kill right
+ instruction. */
+ cur_left_kills_right_p = 0;
+ }
+ } /* mvtsys */
+ }
+ else
+ cur_left_kills_right_p = 0;
+ }
+
+ return insn;
+}
+
+/* Called internally to handle all alignment needs. This takes care
+ of eliding calls to frag_align if'n the cached current alignment
+ says we've already got it, as well as taking care of the auto-aligning
+ labels wrt code. */
+
+static void
+d30v_align (int n, char *pfill, symbolS *label)
+{
+ /* The front end is prone to changing segments out from under us
+ temporarily when -g is in effect. */
+ int switched_seg_p = (d30v_current_align_seg != now_seg);
+
+ /* Do not assume that if 'd30v_current_align >= n' and
+ '! switched_seg_p' that it is safe to avoid performing
+ this alignment request. The alignment of the current frag
+ can be changed under our feet, for example by a .ascii
+ directive in the source code. cf testsuite/gas/d30v/reloc.s */
+ d30v_cleanup (FALSE);
+
+ if (pfill == NULL)
+ {
+ if (n > 2
+ && (bfd_get_section_flags (stdoutput, now_seg) & SEC_CODE) != 0)
+ {
+ static char const nop[4] = { 0x00, 0xf0, 0x00, 0x00 };
+
+ /* First, make sure we're on a four-byte boundary, in case
+ someone has been putting .byte values the text section. */
+ if (d30v_current_align < 2 || switched_seg_p)
+ frag_align (2, 0, 0);
+ frag_align_pattern (n, nop, sizeof nop, 0);
+ }
+ else
+ frag_align (n, 0, 0);
+ }
+ else
+ frag_align (n, *pfill, 0);
+
+ if (!switched_seg_p)
+ d30v_current_align = n;
+
+ if (label != NULL)
+ {
+ symbolS *sym;
+ int label_seen = FALSE;
+ struct frag *old_frag;
+ valueT old_value;
+ valueT new_value;
+
+ assert (S_GET_SEGMENT (label) == now_seg);
+
+ old_frag = symbol_get_frag (label);
+ old_value = S_GET_VALUE (label);
+ new_value = (valueT) frag_now_fix ();
+
+ /* It is possible to have more than one label at a particular
+ address, especially if debugging is enabled, so we must
+ take care to adjust all the labels at this address in this
+ fragment. To save time we search from the end of the symbol
+ list, backwards, since the symbols we are interested in are
+ almost certainly the ones that were most recently added.
+ Also to save time we stop searching once we have seen at least
+ one matching label, and we encounter a label that is no longer
+ in the target fragment. Note, this search is guaranteed to
+ find at least one match when sym == label, so no special case
+ code is necessary. */
+ for (sym = symbol_lastP; sym != NULL; sym = symbol_previous (sym))
+ {
+ if (symbol_get_frag (sym) == old_frag
+ && S_GET_VALUE (sym) == old_value)
+ {
+ label_seen = TRUE;
+ symbol_set_frag (sym, frag_now);
+ S_SET_VALUE (sym, new_value);
+ }
+ else if (label_seen && symbol_get_frag (sym) != old_frag)
+ break;
+ }
+ }
+
+ record_alignment (now_seg, n);
+}
+
+/* This is the main entry point for the machine-dependent assembler.
+ STR points to a machine-dependent instruction. This function is
+ supposed to emit the frags/bytes it assembles to. For the D30V, it
+ mostly handles the special VLIW parsing and packing and leaves the
+ difficult stuff to do_assemble (). */
+
+static long long prev_insn = -1;
+static struct d30v_insn prev_opcode;
+static subsegT prev_subseg;
+static segT prev_seg = 0;
+
+void
+md_assemble (char *str)
+{
+ struct d30v_insn opcode;
+ long long insn;
+ /* Execution type; parallel, etc. */
+ exec_type_enum extype = EXEC_UNKNOWN;
+ /* Saved extype. Used for multiline instructions. */
+ static exec_type_enum etype = EXEC_UNKNOWN;
+ char *str2;
+
+ if ((prev_insn != -1) && prev_seg
+ && ((prev_seg != now_seg) || (prev_subseg != now_subseg)))
+ d30v_cleanup (FALSE);
+
+ if (d30v_current_align < 3)
+ d30v_align (3, NULL, d30v_last_label);
+ else if (d30v_current_align > 3)
+ d30v_current_align = 3;
d30v_last_label = NULL;
flag_explicitly_parallel = 0;
flag_xp_state = 0;
if (etype == EXEC_UNKNOWN)
{
- /* look for the special multiple instruction separators */
+ /* Look for the special multiple instruction separators. */
str2 = strstr (str, "||");
- if (str2)
+ if (str2)
{
extype = EXEC_PARALLEL;
flag_xp_state = 1;
else
{
str2 = strstr (str, "->");
- if (str2)
+ if (str2)
extype = EXEC_SEQ;
else
{
str2 = strstr (str, "<-");
- if (str2)
+ if (str2)
extype = EXEC_REVSEQ;
}
}
- /* str2 points to the separator, if one */
- if (str2)
+
+ /* STR2 points to the separator, if one. */
+ if (str2)
{
*str2 = 0;
-
- /* if two instructions are present and we already have one saved
- then first write it out */
- d30v_cleanup (false);
-
+
+ /* If two instructions are present and we already have one saved,
+ then first write it out. */
+ d30v_cleanup (FALSE);
+
/* Assemble first instruction and save it. */
prev_insn = do_assemble (str, &prev_opcode, 1, 0);
if (prev_insn == -1)
as_bad (_("Cannot assemble instruction"));
if (prev_opcode.form != NULL && prev_opcode.form->form >= LONG)
- as_bad (_("First opcode is long. Unable to mix instructions as specified."));
+ as_bad (_("First opcode is long. Unable to mix instructions as specified."));
fixups = fixups->next;
str = str2 + 2;
prev_seg = now_seg;
&& (opcode.op->flags_used & FLAG_MEM)
&& opcode.form->form < LONG
&& (extype == EXEC_PARALLEL || (Optimizing && extype == EXEC_UNKNOWN))
- && parallel_ok (&prev_opcode, (long)prev_insn,
- &opcode, (long)insn, extype)
- && write_2_short (&prev_opcode, (long)prev_insn,
- &opcode, (long)insn, extype, fixups) == 0)
+ && parallel_ok (&prev_opcode, (long) prev_insn,
+ &opcode, (long) insn, extype)
+ && write_2_short (&prev_opcode, (long) prev_insn,
+ &opcode, (long) insn, extype, fixups) == 0)
{
- /* no instructions saved */
+ /* No instructions saved. */
prev_insn = -1;
return;
}
else
{
- /* Can't parallelize, flush previous instruction and emit a word of NOPS,
- unless the previous instruction is a NOP, in which case just flush it,
- as this will generate a word of NOPs for us. */
+ /* Can't parallelize, flush previous instruction and emit a
+ word of NOPS, unless the previous instruction is a NOP,
+ in which case just flush it, as this will generate a word
+ of NOPs for us. */
if (prev_insn != -1 && (strcmp (prev_opcode.op->name, "nop") == 0))
- d30v_cleanup (false);
+ d30v_cleanup (FALSE);
else
{
- char * f;
-
+ char *f;
+
if (prev_insn != -1)
- d30v_cleanup (true);
+ d30v_cleanup (TRUE);
else
{
f = frag_more (8);
d30v_number_to_chars (f, NOP2, 8);
-
+
if (warn_nops == NOP_ALL || warn_nops == NOP_MULTIPLY)
{
if (opcode.op->flags_used & FLAG_MEM)
as_warn (_("word of NOPs added between word multiply and load"));
else
as_warn (_("word of NOPs added between word multiply and 16-bit multiply"));
- }
- }
- }
-
- extype = EXEC_UNKNOWN;
- }
- }
- else if ( (extype == EXEC_REVSEQ)
- && cur_mul32_p
- && (prev_opcode.op->flags_used & (FLAG_MEM | FLAG_MUL16)))
- {
- /* Can't parallelize, flush current instruction and add a sequential NOP. */
- write_1_short (& opcode, (long) insn, fixups->next->next, true);
-
- /* Make the previous instruction the current one. */
- extype = EXEC_UNKNOWN;
- insn = prev_insn;
- now_seg = prev_seg;
- now_subseg = prev_subseg;
- prev_insn = -1;
- cur_mul32_p = prev_mul32_p;
- prev_mul32_p = 0;
- memcpy (&opcode, &prev_opcode, sizeof (prev_opcode));
- }
-
- /* If this is a long instruction, write it and any previous short instruction. */
- if (opcode.form->form >= LONG)
- {
- if (extype != EXEC_UNKNOWN)
- as_bad (_("Instruction uses long version, so it cannot be mixed as specified"));
- d30v_cleanup (false);
- write_long (& opcode, insn, fixups);
- prev_insn = -1;
- }
- else if ((prev_insn != -1)
- && (write_2_short
- (& prev_opcode, (long) prev_insn, & opcode,
- (long) insn, extype, fixups) == 0))
- {
- /* No instructions saved. */
- prev_insn = -1;
- }
- else
- {
- if (extype != EXEC_UNKNOWN)
- as_bad (_("Unable to mix instructions as specified"));
-
- /* Save off last instruction so it may be packed on next pass. */
- memcpy (&prev_opcode, &opcode, sizeof (prev_opcode));
- prev_insn = insn;
- prev_seg = now_seg;
- prev_subseg = now_subseg;
- fixups = fixups->next;
- prev_mul32_p = cur_mul32_p;
- }
-}
-
-
-/* do_assemble assembles a single instruction and returns an opcode */
-/* it returns -1 (an invalid opcode) on error */
-
-#define NAME_BUF_LEN 20
-
-static long long
-do_assemble (str, opcode, shortp, is_parallel)
- char *str;
- struct d30v_insn *opcode;
- int shortp;
- int is_parallel;
-{
- unsigned char * op_start;
- unsigned char * save;
- unsigned char * op_end;
- char name [NAME_BUF_LEN];
- int cmp_hack;
- int nlen = 0;
- int fsize = (shortp ? FORCE_SHORT : 0);
- expressionS myops [6];
- long long insn;
-
- /* Drop leading whitespace */
- while (* str == ' ')
- str ++;
-
- /* find the opcode end */
- for (op_start = op_end = (unsigned char *) (str);
- * op_end
- && nlen < (NAME_BUF_LEN - 1)
- && * op_end != '/'
- && !is_end_of_line[*op_end] && *op_end != ' ';
- op_end++)
- {
- name[nlen] = tolower (op_start[nlen]);
- nlen++;
- }
-
- if (nlen == 0)
- return -1;
-
- name[nlen] = 0;
-
- /* if there is an execution condition code, handle it */
- if (*op_end == '/')
- {
- int i = 0;
- while ( (i < ECC_MAX) && strncasecmp (d30v_ecc_names[i], op_end + 1, 2))
- i++;
-
- if (i == ECC_MAX)
- {
- char tmp[4];
- strncpy (tmp, op_end + 1, 2);
- tmp[2] = 0;
- as_bad (_("unknown condition code: %s"),tmp);
- return -1;
- }
- /* printf ("condition code=%d\n",i); */
- opcode->ecc = i;
- op_end += 3;
- }
- else
- opcode->ecc = ECC_AL;
-
-
- /* CMP and CMPU change their name based on condition codes */
- if (!strncmp (name, "cmp", 3))
- {
- int p,i;
- char **str = (char **)d30v_cc_names;
- if (name[3] == 'u')
- p = 4;
- else
- p = 3;
-
- for (i=1; *str && strncmp (*str, & name[p], 2); i++, str++)
- ;
-
- /* cmpu only supports some condition codes */
- if (p == 4)
- {
- if (i < 3 || i > 6)
- {
- name[p+2]=0;
- as_bad (_("cmpu doesn't support condition code %s"),&name[p]);
+ }
+ }
}
- }
- if (!*str)
- {
- name[p+2]=0;
- as_bad (_("unknown condition code: %s"),&name[p]);
+ extype = EXEC_UNKNOWN;
}
-
- cmp_hack = i;
- name[p] = 0;
}
- else
- cmp_hack = 0;
-
- /* printf("cmp_hack=%d\n",cmp_hack); */
-
- /* need to look for .s or .l */
- if (name[nlen-2] == '.')
+ else if ( (extype == EXEC_REVSEQ)
+ && cur_mul32_p
+ && (prev_opcode.op->flags_used & (FLAG_MEM | FLAG_MUL16)))
{
- switch (name[nlen-1])
- {
- case 's':
- fsize = FORCE_SHORT;
- break;
- case 'l':
- fsize = FORCE_LONG;
- break;
- }
- name[nlen-2] = 0;
+ /* Can't parallelize, flush current instruction and add a
+ sequential NOP. */
+ write_1_short (&opcode, (long) insn, fixups->next->next, TRUE);
+
+ /* Make the previous instruction the current one. */
+ extype = EXEC_UNKNOWN;
+ insn = prev_insn;
+ now_seg = prev_seg;
+ now_subseg = prev_subseg;
+ prev_insn = -1;
+ cur_mul32_p = prev_mul32_p;
+ prev_mul32_p = 0;
+ memcpy (&opcode, &prev_opcode, sizeof (prev_opcode));
}
- /* find the first opcode with the proper name */
- opcode->op = (struct d30v_opcode *)hash_find (d30v_hash, name);
- if (opcode->op == NULL)
+ /* If this is a long instruction, write it and any previous short
+ instruction. */
+ if (opcode.form->form >= LONG)
{
- as_bad (_("unknown opcode: %s"),name);
- return -1;
+ if (extype != EXEC_UNKNOWN)
+ as_bad (_("Instruction uses long version, so it cannot be mixed as specified"));
+ d30v_cleanup (FALSE);
+ write_long (&opcode, insn, fixups);
+ prev_insn = -1;
}
-
- save = input_line_pointer;
- input_line_pointer = op_end;
- while (!(opcode->form = find_format (opcode->op, myops, fsize, cmp_hack)))
+ else if ((prev_insn != -1)
+ && (write_2_short
+ (&prev_opcode, (long) prev_insn, &opcode,
+ (long) insn, extype, fixups) == 0))
{
- opcode->op++;
- if (opcode->op->name == NULL || strcmp (opcode->op->name, name))
- {
- as_bad (_("operands for opcode `%s' do not match any valid format"), name);
- return -1;
- }
+ /* No instructions saved. */
+ prev_insn = -1;
}
- input_line_pointer = save;
-
- insn = build_insn (opcode, myops);
-
- /* Propigate multiply status */
- if (insn != -1)
+ else
{
- if (is_parallel && prev_mul32_p)
- cur_mul32_p = 1;
- else
- {
- prev_mul32_p = cur_mul32_p;
- cur_mul32_p = (opcode->op->flags_used & FLAG_MUL32) != 0;
- }
+ if (extype != EXEC_UNKNOWN)
+ as_bad (_("Unable to mix instructions as specified"));
+
+ /* Save off last instruction so it may be packed on next pass. */
+ memcpy (&prev_opcode, &opcode, sizeof (prev_opcode));
+ prev_insn = insn;
+ prev_seg = now_seg;
+ prev_subseg = now_subseg;
+ fixups = fixups->next;
+ prev_mul32_p = cur_mul32_p;
}
+}
- /* Propagate left_kills_right status */
- if (insn != -1)
- {
- prev_left_kills_right_p = cur_left_kills_right_p;
+/* If while processing a fixup, a reloc really needs to be created,
+ then it is done here. */
- if (opcode->op->flags_set & FLAG_LKR)
- {
- cur_left_kills_right_p = 1;
-
- if (strcmp (opcode->op->name, "mvtsys") == 0)
- {
- /* Left kills right for only mvtsys only for PSW/PSWH/PSWL/flags target. */
- if ((myops[0].X_op == O_register) &&
- ((myops[0].X_add_number == OPERAND_CONTROL) || /* psw */
- (myops[0].X_add_number == OPERAND_CONTROL+MAX_CONTROL_REG+2) || /* pswh */
- (myops[0].X_add_number == OPERAND_CONTROL+MAX_CONTROL_REG+1) || /* pswl */
- (myops[0].X_add_number == OPERAND_FLAG+0) || /* f0 */
- (myops[0].X_add_number == OPERAND_FLAG+1) || /* f1 */
- (myops[0].X_add_number == OPERAND_FLAG+2) || /* f2 */
- (myops[0].X_add_number == OPERAND_FLAG+3) || /* f3 */
- (myops[0].X_add_number == OPERAND_FLAG+4) || /* f4 */
- (myops[0].X_add_number == OPERAND_FLAG+5) || /* f5 */
- (myops[0].X_add_number == OPERAND_FLAG+6) || /* f6 */
- (myops[0].X_add_number == OPERAND_FLAG+7))) /* f7 */
- {
- cur_left_kills_right_p = 1;
- }
- else
- {
- /* Other mvtsys target registers don't kill right instruction. */
- cur_left_kills_right_p = 0;
- }
- } /* mvtsys */
- }
- else
- cur_left_kills_right_p = 0;
+arelent *
+tc_gen_reloc (asection *seg ATTRIBUTE_UNUSED, fixS *fixp)
+{
+ arelent *reloc;
+ reloc = xmalloc (sizeof (arelent));
+ reloc->sym_ptr_ptr = xmalloc (sizeof (asymbol *));
+ *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
+ reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
+ reloc->howto = bfd_reloc_type_lookup (stdoutput, fixp->fx_r_type);
+ if (reloc->howto == NULL)
+ {
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("reloc %d not supported by object file format"),
+ (int) fixp->fx_r_type);
+ return NULL;
}
- return insn;
+ reloc->addend = 0;
+ return reloc;
}
+int
+md_estimate_size_before_relax (fragS *fragp ATTRIBUTE_UNUSED,
+ asection *seg ATTRIBUTE_UNUSED)
+{
+ abort ();
+ return 0;
+}
-/* find_format() gets a pointer to an entry in the format table.
- It must look at all formats for an opcode and use the operands
- to choose the correct one. Returns NULL on error. */
-
-static struct d30v_format *
-find_format (opcode, myops, fsize, cmp_hack)
- struct d30v_opcode *opcode;
- expressionS myops[];
- int fsize;
- int cmp_hack;
+long
+md_pcrel_from_section (fixS *fixp, segT sec)
{
- int numops, match, index, i=0, j, k;
- struct d30v_format *fm;
+ if (fixp->fx_addsy != (symbolS *) NULL
+ && (!S_IS_DEFINED (fixp->fx_addsy)
+ || (S_GET_SEGMENT (fixp->fx_addsy) != sec)))
+ return 0;
+ return fixp->fx_frag->fr_address + fixp->fx_where;
+}
- if (opcode == NULL)
- return NULL;
-
- /* Get all the operands and save them as expressions. */
- numops = get_operands (myops, cmp_hack);
+/* Called after the assembler has finished parsing the input file or
+ after a label is defined. Because the D30V assembler sometimes
+ saves short instructions to see if it can package them with the
+ next instruction, there may be a short instruction that still needs
+ written. */
- while ((index = opcode->format[i++]) != 0)
- {
- if (fsize == FORCE_SHORT && index >= LONG)
- continue;
+int
+d30v_cleanup (int use_sequential)
+{
+ segT seg;
+ subsegT subseg;
- if (fsize == FORCE_LONG && index < LONG)
- continue;
+ if (prev_insn != -1)
+ {
+ seg = now_seg;
+ subseg = now_subseg;
+ subseg_set (prev_seg, prev_subseg);
+ write_1_short (&prev_opcode, (long) prev_insn, fixups->next,
+ use_sequential);
+ subseg_set (seg, subseg);
+ prev_insn = -1;
+ if (use_sequential)
+ prev_mul32_p = FALSE;
+ }
- fm = (struct d30v_format *)&d30v_format_table[index];
- k = index;
- while (fm->form == index)
- {
- match = 1;
- /* Now check the operands for compatibility. */
- for (j = 0; match && fm->operands[j]; j++)
- {
- int flags = d30v_operand_table[fm->operands[j]].flags;
- int bits = d30v_operand_table[fm->operands[j]].bits;
- int X_op = myops[j].X_op;
- int num = myops[j].X_add_number;
-
- if (flags & OPERAND_SPECIAL)
- break;
- else if (X_op == O_illegal)
- match = 0;
- else if (flags & OPERAND_REG)
- {
- if (X_op != O_register
- || ((flags & OPERAND_ACC) && !(num & OPERAND_ACC))
- || (!(flags & OPERAND_ACC) && (num & OPERAND_ACC))
- || ((flags & OPERAND_FLAG) && !(num & OPERAND_FLAG))
- || (!(flags & (OPERAND_FLAG | OPERAND_CONTROL)) && (num & OPERAND_FLAG))
- || ((flags & OPERAND_CONTROL)
- && !(num & (OPERAND_CONTROL | OPERAND_FLAG))))
- {
- match = 0;
- }
- }
- else if (((flags & OPERAND_MINUS)
- && (X_op != O_absent || num != OPERAND_MINUS))
- || ((flags & OPERAND_PLUS)
- && (X_op != O_absent || num != OPERAND_PLUS))
- || ((flags & OPERAND_ATMINUS)
- && (X_op != O_absent || num != OPERAND_ATMINUS))
- || ((flags & OPERAND_ATPAR)
- && (X_op != O_absent || num != OPERAND_ATPAR))
- || ((flags & OPERAND_ATSIGN)
- && (X_op != O_absent || num != OPERAND_ATSIGN)))
- {
- match=0;
- }
- else if (flags & OPERAND_NUM)
- {
- /* A number can be a constant or symbol expression. */
+ return 1;
+}
- /* If we have found a register name, but that name also
- matches a symbol, then re-parse the name as an expression. */
- if (X_op == O_register
- && symbol_find ((char *) myops[j].X_op_symbol))
- {
- input_line_pointer = (char *) myops[j].X_op_symbol;
- expression (& myops[j]);
- }
-
- /* Turn an expression into a symbol for later resolution. */
- if (X_op != O_absent && X_op != O_constant
- && X_op != O_symbol && X_op != O_register
- && X_op != O_big)
- {
- symbolS *sym = make_expr_symbol (&myops[j]);
- myops[j].X_op = X_op = O_symbol;
- myops[j].X_add_symbol = sym;
- myops[j].X_add_number = num = 0;
- }
+/* This function is called at the start of every line. It checks to
+ see if the first character is a '.', which indicates the start of a
+ pseudo-op. If it is, then write out any unwritten instructions. */
- if (fm->form >= LONG)
- {
- /* If we're testing for a LONG format, either fits. */
- if (X_op != O_constant && X_op != O_symbol)
- match = 0;
- }
- else if (fm->form < LONG
- && ((fsize == FORCE_SHORT && X_op == O_symbol)
- || (fm->form == SHORT_D2 && j == 0)))
- match = 1;
- /* This is the tricky part. Will the constant or symbol
- fit into the space in the current format? */
- else if (X_op == O_constant)
- {
- if (check_range (num, bits, flags))
- match = 0;
- }
- else if (X_op == O_symbol
- && S_IS_DEFINED (myops[j].X_add_symbol)
- && S_GET_SEGMENT (myops[j].X_add_symbol) == now_seg
- && opcode->reloc_flag == RELOC_PCREL)
- {
- /* If the symbol is defined, see if the value will fit
- into the form we're considering. */
- fragS *f;
- long value;
+void
+d30v_start_line (void)
+{
+ char *c = input_line_pointer;
- /* Calculate the current address by running through the
- previous frags and adding our current offset. */
- value = 0;
- for (f = frchain_now->frch_root; f; f = f->fr_next)
- value += f->fr_fix + f->fr_offset;
- value = (S_GET_VALUE (myops[j].X_add_symbol) - value
- - (obstack_next_free (&frchain_now->frch_obstack)
- - frag_now->fr_literal));
- if (check_range (value, bits, flags))
- match = 0;
- }
- else
- match = 0;
- }
- }
- /* printf("through the loop: match=%d\n",match); */
- /* We're only done if the operands matched so far AND there
- are no more to check. */
- if (match && myops[j].X_op == 0)
- {
- /* Final check - issue a warning if an odd numbered register
- is used as the first register in an instruction that reads
- or writes 2 registers. */
+ while (ISSPACE (*c))
+ c++;
- for (j = 0; fm->operands[j]; j++)
- if (myops[j].X_op == O_register
- && (myops[j].X_add_number & 1)
- && (d30v_operand_table[fm->operands[j]].flags & OPERAND_2REG))
- as_warn (\
-_("Odd numbered register used as target of multi-register instruction"));
-
- return fm;
- }
- fm = (struct d30v_format *)&d30v_format_table[++k];
- }
- /* printf("trying another format: i=%d\n",i); */
- }
- return NULL;
+ if (*c == '.')
+ d30v_cleanup (FALSE);
}
-/* if while processing a fixup, a reloc really needs to be created */
-/* then it is done here */
-
-arelent *
-tc_gen_reloc (seg, fixp)
- asection *seg;
- fixS *fixp;
+static void
+check_size (long value, int bits, char *file, int line)
{
- arelent *reloc;
- reloc = (arelent *) xmalloc (sizeof (arelent));
- reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
- *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
- reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
- reloc->howto = bfd_reloc_type_lookup (stdoutput, fixp->fx_r_type);
- if (reloc->howto == (reloc_howto_type *) NULL)
- {
- as_bad_where (fixp->fx_file, fixp->fx_line,
- _("reloc %d not supported by object file format"), (int)fixp->fx_r_type);
- return NULL;
- }
- reloc->addend = fixp->fx_addnumber;
- return reloc;
+ int tmp, max;
+
+ if (value < 0)
+ tmp = ~value;
+ else
+ tmp = value;
+
+ max = (1 << (bits - 1)) - 1;
+
+ if (tmp > max)
+ as_bad_where (file, line, _("value too large to fit in %d bits"), bits);
}
-int
-md_estimate_size_before_relax (fragp, seg)
- fragS *fragp;
- asection *seg;
+/* d30v_frob_label() is called when after a label is recognized. */
+
+void
+d30v_frob_label (symbolS *lab)
{
- abort ();
- return 0;
-}
+ /* Emit any pending instructions. */
+ d30v_cleanup (FALSE);
-long
-md_pcrel_from_section (fixp, sec)
- fixS *fixp;
- segT sec;
+ /* Update the label's address with the current output pointer. */
+ symbol_set_frag (lab, frag_now);
+ S_SET_VALUE (lab, (valueT) frag_now_fix ());
+
+ /* Record this label for future adjustment after we find out what
+ kind of data it references, and the required alignment therewith. */
+ d30v_last_label = lab;
+}
+
+/* Hook into cons for capturing alignment changes. */
+
+void
+d30v_cons_align (int size)
{
- if (fixp->fx_addsy != (symbolS *)NULL && (!S_IS_DEFINED (fixp->fx_addsy) ||
- (S_GET_SEGMENT (fixp->fx_addsy) != sec)))
- return 0;
- return fixp->fx_frag->fr_address + fixp->fx_where;
+ int log_size;
+
+ log_size = 0;
+ while ((size >>= 1) != 0)
+ ++log_size;
+
+ if (d30v_current_align < log_size)
+ d30v_align (log_size, (char *) NULL, NULL);
+ else if (d30v_current_align > log_size)
+ d30v_current_align = log_size;
+ d30v_last_label = NULL;
}
-int
-md_apply_fix3 (fixp, valuep, seg)
- fixS * fixp;
- valueT * valuep;
- segT seg;
+void
+md_apply_fix (fixS *fixP, valueT *valP, segT seg ATTRIBUTE_UNUSED)
{
- char * where;
+ char *where;
unsigned long insn, insn2;
- long value;
-
- if (fixp->fx_addsy == (symbolS *) NULL)
- {
- value = * valuep;
- fixp->fx_done = 1;
- }
- else if (fixp->fx_pcrel)
- value = * valuep;
- else
- {
- value = fixp->fx_offset;
-
- if (fixp->fx_subsy != (symbolS *) NULL)
- {
- if (S_GET_SEGMENT (fixp->fx_subsy) == absolute_section)
- value -= S_GET_VALUE (fixp->fx_subsy);
- else
- {
- /* We don't actually support subtracting a symbol. */
- as_bad_where (fixp->fx_file, fixp->fx_line,
- _("expression too complex"));
- }
- }
- }
-
+ long value = *valP;
+
+ if (fixP->fx_addsy == (symbolS *) NULL)
+ fixP->fx_done = 1;
+
+ /* We don't support subtracting a symbol. */
+ if (fixP->fx_subsy != (symbolS *) NULL)
+ as_bad_where (fixP->fx_file, fixP->fx_line, _("expression too complex"));
+
/* Fetch the instruction, insert the fully resolved operand
value, and stuff the instruction back again. */
- where = fixp->fx_frag->fr_literal + fixp->fx_where;
+ where = fixP->fx_frag->fr_literal + fixP->fx_where;
insn = bfd_getb32 ((unsigned char *) where);
-
- switch (fixp->fx_r_type)
+
+ switch (fixP->fx_r_type)
{
case BFD_RELOC_8: /* Check for a bad .byte directive. */
- if (fixp->fx_addsy != NULL)
+ if (fixP->fx_addsy != NULL)
as_bad (_("line %d: unable to place address of symbol '%s' into a byte"),
- fixp->fx_line, S_GET_NAME (fixp->fx_addsy));
+ fixP->fx_line, S_GET_NAME (fixP->fx_addsy));
else if (((unsigned)value) > 0xff)
- as_bad (_("line %d: unable to place value %x into a byte"),
- fixp->fx_line, value);
+ as_bad (_("line %d: unable to place value %lx into a byte"),
+ fixP->fx_line, value);
else
- * (unsigned char *) where = value;
+ *(unsigned char *) where = value;
break;
-
+
case BFD_RELOC_16: /* Check for a bad .short directive. */
- if (fixp->fx_addsy != NULL)
+ if (fixP->fx_addsy != NULL)
as_bad (_("line %d: unable to place address of symbol '%s' into a short"),
- fixp->fx_line, S_GET_NAME (fixp->fx_addsy));
+ fixP->fx_line, S_GET_NAME (fixP->fx_addsy));
else if (((unsigned)value) > 0xffff)
- as_bad (_("line %d: unable to place value %x into a short"),
- fixp->fx_line, value);
+ as_bad (_("line %d: unable to place value %lx into a short"),
+ fixP->fx_line, value);
else
bfd_putb16 ((bfd_vma) value, (unsigned char *) where);
break;
-
+
case BFD_RELOC_64: /* Check for a bad .quad directive. */
- if (fixp->fx_addsy != NULL)
+ if (fixP->fx_addsy != NULL)
as_bad (_("line %d: unable to place address of symbol '%s' into a quad"),
- fixp->fx_line, S_GET_NAME (fixp->fx_addsy));
+ fixP->fx_line, S_GET_NAME (fixP->fx_addsy));
else
{
bfd_putb32 ((bfd_vma) value, (unsigned char *) where);
bfd_putb32 (0, ((unsigned char *) where) + 4);
}
break;
-
+
case BFD_RELOC_D30V_6:
- check_size (value, 6, fixp->fx_file, fixp->fx_line);
+ check_size (value, 6, fixP->fx_file, fixP->fx_line);
insn |= value & 0x3F;
bfd_putb32 ((bfd_vma) insn, (unsigned char *) where);
break;
case BFD_RELOC_D30V_9_PCREL:
- if (fixp->fx_where & 0x7)
+ if (fixP->fx_where & 0x7)
{
- if (fixp->fx_done)
+ if (fixP->fx_done)
value += 4;
else
- fixp->fx_r_type = BFD_RELOC_D30V_9_PCREL_R;
+ fixP->fx_r_type = BFD_RELOC_D30V_9_PCREL_R;
}
- check_size (value, 9, fixp->fx_file, fixp->fx_line);
+ check_size (value, 9, fixP->fx_file, fixP->fx_line);
insn |= ((value >> 3) & 0x3F) << 12;
bfd_putb32 ((bfd_vma) insn, (unsigned char *) where);
break;
case BFD_RELOC_D30V_15:
- check_size (value, 15, fixp->fx_file, fixp->fx_line);
+ check_size (value, 15, fixP->fx_file, fixP->fx_line);
insn |= (value >> 3) & 0xFFF;
bfd_putb32 ((bfd_vma) insn, (unsigned char *) where);
break;
case BFD_RELOC_D30V_15_PCREL:
- if (fixp->fx_where & 0x7)
+ if (fixP->fx_where & 0x7)
{
- if (fixp->fx_done)
+ if (fixP->fx_done)
value += 4;
else
- fixp->fx_r_type = BFD_RELOC_D30V_15_PCREL_R;
+ fixP->fx_r_type = BFD_RELOC_D30V_15_PCREL_R;
}
- check_size (value, 15, fixp->fx_file, fixp->fx_line);
+ check_size (value, 15, fixP->fx_file, fixP->fx_line);
insn |= (value >> 3) & 0xFFF;
bfd_putb32 ((bfd_vma) insn, (unsigned char *) where);
break;
case BFD_RELOC_D30V_21:
- check_size (value, 21, fixp->fx_file, fixp->fx_line);
+ check_size (value, 21, fixP->fx_file, fixP->fx_line);
insn |= (value >> 3) & 0x3FFFF;
bfd_putb32 ((bfd_vma) insn, (unsigned char *) where);
break;
case BFD_RELOC_D30V_21_PCREL:
- if (fixp->fx_where & 0x7)
+ if (fixP->fx_where & 0x7)
{
- if (fixp->fx_done)
+ if (fixP->fx_done)
value += 4;
else
- fixp->fx_r_type = BFD_RELOC_D30V_21_PCREL_R;
+ fixP->fx_r_type = BFD_RELOC_D30V_21_PCREL_R;
}
- check_size (value, 21, fixp->fx_file, fixp->fx_line);
+ check_size (value, 21, fixP->fx_file, fixP->fx_line);
insn |= (value >> 3) & 0x3FFFF;
bfd_putb32 ((bfd_vma) insn, (unsigned char *) where);
break;
case BFD_RELOC_D30V_32:
insn2 = bfd_getb32 ((unsigned char *) where + 4);
- insn |= (value >> 26) & 0x3F; /* top 6 bits */
- insn2 |= ((value & 0x03FC0000) << 2); /* next 8 bits */
- insn2 |= value & 0x0003FFFF; /* bottom 18 bits */
+ insn |= (value >> 26) & 0x3F; /* Top 6 bits. */
+ insn2 |= ((value & 0x03FC0000) << 2); /* Next 8 bits. */
+ insn2 |= value & 0x0003FFFF; /* Bottom 18 bits. */
bfd_putb32 ((bfd_vma) insn, (unsigned char *) where);
bfd_putb32 ((bfd_vma) insn2, (unsigned char *) where + 4);
break;
case BFD_RELOC_D30V_32_PCREL:
insn2 = bfd_getb32 ((unsigned char *) where + 4);
- insn |= (value >> 26) & 0x3F; /* top 6 bits */
- insn2 |= ((value & 0x03FC0000) << 2); /* next 8 bits */
- insn2 |= value & 0x0003FFFF; /* bottom 18 bits */
+ insn |= (value >> 26) & 0x3F; /* Top 6 bits. */
+ insn2 |= ((value & 0x03FC0000) << 2); /* Next 8 bits. */
+ insn2 |= value & 0x0003FFFF; /* Bottom 18 bits. */
bfd_putb32 ((bfd_vma) insn, (unsigned char *) where);
bfd_putb32 ((bfd_vma) insn2, (unsigned char *) where + 4);
break;
default:
as_bad (_("line %d: unknown relocation type: 0x%x"),
- fixp->fx_line,fixp->fx_r_type);
- }
-
- return 0;
-}
-
-
-/* d30v_cleanup() is called after the assembler has finished parsing the input
- file or after a label is defined. Because the D30V assembler sometimes saves short
- instructions to see if it can package them with the next instruction, there may
- be a short instruction that still needs written. */
-int
-d30v_cleanup (use_sequential)
- int use_sequential;
-{
- segT seg;
- subsegT subseg;
-
- if (prev_insn != -1)
- {
- seg = now_seg;
- subseg = now_subseg;
- subseg_set (prev_seg, prev_subseg);
- write_1_short (&prev_opcode, (long)prev_insn, fixups->next, use_sequential);
- subseg_set (seg, subseg);
- prev_insn = -1;
- if (use_sequential)
- prev_mul32_p = false;
- }
- return 1;
-}
-
-static void
-d30v_number_to_chars (buf, value, n)
- char *buf; /* Return 'nbytes' of chars here. */
- long long value; /* The value of the bits. */
- int n; /* Number of bytes in the output. */
-{
- while (n--)
- {
- buf[n] = value & 0xff;
- value >>= 8;
- }
-}
-
-
-/* This function is called at the start of every line. */
-/* it checks to see if the first character is a '.' */
-/* which indicates the start of a pseudo-op. If it is, */
-/* then write out any unwritten instructions */
-
-void
-d30v_start_line ()
-{
- char *c = input_line_pointer;
-
- while (isspace (*c))
- c++;
-
- if (*c == '.')
- d30v_cleanup (false);
-}
-
-static void
-check_size (value, bits, file, line)
- long value;
- int bits;
- char *file;
- int line;
-{
- int tmp, max;
-
- if (value < 0)
- tmp = ~value;
- else
- tmp = value;
-
- max = (1 << (bits - 1)) - 1;
-
- if (tmp > max)
- as_bad_where (file, line, _("value too large to fit in %d bits"), bits);
-
- return;
-}
-
-/* d30v_frob_label() is called when after a label is recognized. */
-
-void
-d30v_frob_label (lab)
- symbolS *lab;
-{
- /* Emit any pending instructions. */
- d30v_cleanup (false);
-
- /* Update the label's address with the current output pointer. */
- symbol_set_frag (lab, frag_now);
- S_SET_VALUE (lab, (valueT) frag_now_fix ());
-
- /* Record this label for future adjustment after we find out what
- kind of data it references, and the required alignment therewith. */
- d30v_last_label = lab;
-}
-
-/* Hook into cons for capturing alignment changes. */
-
-void
-d30v_cons_align (size)
- int size;
-{
- int log_size;
-
- log_size = 0;
- while ((size >>= 1) != 0)
- ++log_size;
-
- if (d30v_current_align < log_size)
- d30v_align (log_size, (char *) NULL, NULL);
- else if (d30v_current_align > log_size)
- d30v_current_align = log_size;
- d30v_last_label = NULL;
-}
-
-/* Called internally to handle all alignment needs. This takes care
- of eliding calls to frag_align if'n the cached current alignment
- says we've already got it, as well as taking care of the auto-aligning
- labels wrt code. */
-
-static void
-d30v_align (n, pfill, label)
- int n;
- char *pfill;
- symbolS *label;
-{
- /* The front end is prone to changing segments out from under us
- temporarily when -g is in effect. */
- int switched_seg_p = (d30v_current_align_seg != now_seg);
-
- /* Do not assume that if 'd30v_current_align >= n' and
- '! switched_seg_p' that it is safe to avoid performing
- this alignement request. The alignment of the current frag
- can be changed under our feet, for example by a .ascii
- directive in the source code. cf testsuite/gas/d30v/reloc.s */
-
- d30v_cleanup (false);
-
- if (pfill == NULL)
- {
- if (n > 2
- && (bfd_get_section_flags (stdoutput, now_seg) & SEC_CODE) != 0)
- {
- static char const nop[4] = { 0x00, 0xf0, 0x00, 0x00 };
-
- /* First, make sure we're on a four-byte boundary, in case
- someone has been putting .byte values the text section. */
- if (d30v_current_align < 2 || switched_seg_p)
- frag_align (2, 0, 0);
- frag_align_pattern (n, nop, sizeof nop, 0);
- }
- else
- frag_align (n, 0, 0);
- }
- else
- frag_align (n, *pfill, 0);
-
- if (!switched_seg_p)
- d30v_current_align = n;
-
- if (label != NULL)
- {
- symbolS * sym;
- int label_seen = false;
- struct frag * old_frag;
- valueT old_value;
- valueT new_value;
-
- assert (S_GET_SEGMENT (label) == now_seg);
-
- old_frag = symbol_get_frag (label);
- old_value = S_GET_VALUE (label);
- new_value = (valueT) frag_now_fix ();
-
- /* It is possible to have more than one label at a particular
- address, especially if debugging is enabled, so we must
- take care to adjust all the labels at this address in this
- fragment. To save time we search from the end of the symbol
- list, backwards, since the symbols we are interested in are
- almost certainly the ones that were most recently added.
- Also to save time we stop searching once we have seen at least
- one matching label, and we encounter a label that is no longer
- in the target fragment. Note, this search is guaranteed to
- find at least one match when sym == label, so no special case
- code is necessary. */
- for (sym = symbol_lastP; sym != NULL; sym = symbol_previous (sym))
- {
- if (symbol_get_frag (sym) == old_frag
- && S_GET_VALUE (sym) == old_value)
- {
- label_seen = true;
- symbol_set_frag (sym, frag_now);
- S_SET_VALUE (sym, new_value);
- }
- else if (label_seen && symbol_get_frag (sym) != old_frag)
- break;
- }
+ fixP->fx_line, fixP->fx_r_type);
}
-
- record_alignment (now_seg, n);
}
/* Handle the .align pseudo-op. This aligns to a power of two. We
hook here to latch the current alignment. */
static void
-s_d30v_align (ignore)
- int ignore;
+s_d30v_align (int ignore ATTRIBUTE_UNUSED)
{
int align;
char fill, *pfill = NULL;
clears the saved last label and resets known alignment. */
static void
-s_d30v_text (i)
- int i;
+s_d30v_text (int i)
{
s_text (i);
clears the saved last label and resets known alignment. */
static void
-s_d30v_data (i)
- int i;
+s_d30v_data (int i)
{
s_data (i);
d30v_last_label = NULL;
clears the saved last label and resets known alignment. */
static void
-s_d30v_section (ignore)
- int ignore;
+s_d30v_section (int ignore)
{
obj_elf_section (ignore);
d30v_last_label = NULL;
d30v_current_align = 0;
d30v_current_align_seg = now_seg;
}
+
+/* The target specific pseudo-ops which we support. */
+const pseudo_typeS md_pseudo_table[] =
+{
+ { "word", cons, 4 },
+ { "hword", cons, 2 },
+ { "align", s_d30v_align, 0 },
+ { "text", s_d30v_text, 0 },
+ { "data", s_d30v_data, 0 },
+ { "section", s_d30v_section, 0 },
+ { "section.s", s_d30v_section, 0 },
+ { "sect", s_d30v_section, 0 },
+ { "sect.s", s_d30v_section, 0 },
+ { NULL, NULL, 0 }
+};
+