/* tc-d30v.c -- Assembler code for the Mitsubishi D30V
- Copyright 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
+ Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2005, 2006, 2007
+ Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ the Free Software Foundation; either version 3, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to
- the Free Software Foundation, 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ the Free Software Foundation, 51 Franklin Street - Fifth Floor,
+ Boston, MA 02110-1301, USA. */
-#include <stdio.h>
#include "as.h"
#include "safe-ctype.h"
#include "subsegs.h"
#include "opcode/d30v.h"
-const char comment_chars[] = ";";
-const char line_comment_chars[] = "#";
+const char comment_chars[] = ";";
+const char line_comment_chars[] = "#";
const char line_separator_chars[] = "";
-const char *md_shortopts = "OnNcC";
-const char EXP_CHARS[] = "eE";
-const char FLT_CHARS[] = "dD";
+const char *md_shortopts = "OnNcC";
+const char EXP_CHARS[] = "eE";
+const char FLT_CHARS[] = "dD";
#if HAVE_LIMITS_H
#include <limits.h>
/* EXEC types. */
typedef enum _exec_type
{
- EXEC_UNKNOWN, /* no order specified */
- EXEC_PARALLEL, /* done in parallel (FM=00) */
- EXEC_SEQ, /* sequential (FM=01) */
- EXEC_REVSEQ /* reverse sequential (FM=10) */
+ EXEC_UNKNOWN, /* No order specified. */
+ EXEC_PARALLEL, /* Done in parallel (FM=00). */
+ EXEC_SEQ, /* Sequential (FM=01). */
+ EXEC_REVSEQ /* Reverse sequential (FM=10). */
} exec_type_enum;
/* Fixups. */
-#define MAX_INSN_FIXUPS (5)
+#define MAX_INSN_FIXUPS 5
+
struct d30v_fixup
{
expressionS exp;
static segT d30v_current_align_seg;
/* The last seen label in the current section. This is used to auto-align
- labels preceeding instructions. */
+ labels preceding instructions. */
static symbolS *d30v_last_label;
/* Two nops. */
#define NOP_RIGHT ((long long) NOP)
#define NOP2 (FM00 | NOP_LEFT | NOP_RIGHT)
-/* Local functions. */
-static int reg_name_search PARAMS ((char *name));
-static int register_name PARAMS ((expressionS *expressionP));
-static int check_range PARAMS ((unsigned long num, int bits, int flags));
-static int postfix PARAMS ((char *p));
-static bfd_reloc_code_real_type get_reloc PARAMS ((struct d30v_operand *op, int rel_flag));
-static int get_operands PARAMS ((expressionS exp[], int cmp_hack));
-static struct d30v_format *find_format PARAMS ((struct d30v_opcode *opcode,
- expressionS ops[],int fsize, int cmp_hack));
-static long long build_insn PARAMS ((struct d30v_insn *opcode, expressionS *opers));
-static void write_long PARAMS ((struct d30v_insn *opcode, long long insn, Fixups *fx));
-static void write_1_short PARAMS ((struct d30v_insn *opcode, long long insn,
- Fixups *fx, int use_sequential));
-static int write_2_short PARAMS ((struct d30v_insn *opcode1, long long insn1,
- struct d30v_insn *opcode2, long long insn2, exec_type_enum exec_type, Fixups *fx));
-static long long do_assemble PARAMS ((char *str, struct d30v_insn *opcode,
- int shortp, int is_parallel));
-static int parallel_ok PARAMS ((struct d30v_insn *opcode1, unsigned long insn1,
- struct d30v_insn *opcode2, unsigned long insn2,
- exec_type_enum exec_type));
-static void d30v_number_to_chars PARAMS ((char *buf, long long value, int nbytes));
-static void check_size PARAMS ((long value, int bits, char *file, int line));
-static void d30v_align PARAMS ((int, char *, symbolS *));
-static void s_d30v_align PARAMS ((int));
-static void s_d30v_text PARAMS ((int));
-static void s_d30v_data PARAMS ((int));
-static void s_d30v_section PARAMS ((int));
-
struct option md_longopts[] =
{
{NULL, no_argument, NULL, 0}
size_t md_longopts_size = sizeof (md_longopts);
-/* The target specific pseudo-ops which we support. */
-const pseudo_typeS md_pseudo_table[] =
-{
- { "word", cons, 4 },
- { "hword", cons, 2 },
- { "align", s_d30v_align, 0 },
- { "text", s_d30v_text, 0 },
- { "data", s_d30v_data, 0 },
- { "section", s_d30v_section, 0 },
- { "section.s", s_d30v_section, 0 },
- { "sect", s_d30v_section, 0 },
- { "sect.s", s_d30v_section, 0 },
- { NULL, NULL, 0 }
-};
-
/* Opcode hash table. */
static struct hash_control *d30v_hash;
array on success, or -1 on failure. */
static int
-reg_name_search (name)
- char *name;
+reg_name_search (char *name)
{
int middle, low, high;
int cmp;
register name. */
static int
-register_name (expressionP)
- expressionS *expressionP;
+register_name (expressionS *expressionP)
{
int reg_number;
char c, *p = input_line_pointer;
}
static int
-check_range (num, bits, flags)
- unsigned long num;
- int bits;
- int flags;
+check_range (unsigned long num, int bits, int flags)
{
long min, max;
if (bits == 32)
{
if (sizeof (unsigned long) * CHAR_BIT == 32)
- return 0;
+ return 0;
/* We don't record signed or unsigned for 32-bit quantities.
Allow either. */
min = -((unsigned long) 1 << (bits - 1));
max = ((unsigned long) 1 << bits) - 1;
- return (long)num < min || (long)num > max;
+ return (long) num < min || (long) num > max;
}
if (flags & OPERAND_SHIFT)
{
/* We know that all shifts are right by three bits. */
+ num >>= 3;
if (flags & OPERAND_SIGNED)
- num = (unsigned long) ((long) num >= 0)
- ? (((long) num) >> 3)
- : ((num >> 3) | ~(~(unsigned long) 0 >> 3));
- else
- num >>= 3;
+ {
+ unsigned long sign_bit = ((unsigned long) -1L >> 4) + 1;
+ num = (num ^ sign_bit) - sign_bit;
+ }
}
if (flags & OPERAND_SIGNED)
{
max = ((unsigned long) 1 << (bits - 1)) - 1;
min = - ((unsigned long) 1 << (bits - 1));
- return (long)num > max || (long)num < min;
+ return (long) num > max || (long) num < min;
}
else
{
max = ((unsigned long) 1 << bits) - 1;
- min = 0;
- return num > max || num < min;
+ return num > (unsigned long) max;
}
}
void
-md_show_usage (stream)
- FILE *stream;
+md_show_usage (FILE *stream)
{
fprintf (stream, _("\nD30V options:\n\
-O Make adjacent short instructions parallel if possible.\n\
}
int
-md_parse_option (c, arg)
- int c;
- char *arg;
+md_parse_option (int c, char *arg ATTRIBUTE_UNUSED)
{
switch (c)
{
}
symbolS *
-md_undefined_symbol (name)
- char *name;
+md_undefined_symbol (char *name ATTRIBUTE_UNUSED)
{
return 0;
}
returned, or NULL on OK. */
char *
-md_atof (type, litP, sizeP)
- int type;
- char *litP;
- int *sizeP;
+md_atof (int type, char *litP, int *sizeP)
{
int prec;
LITTLENUM_TYPE words[4];
}
void
-md_convert_frag (abfd, sec, fragP)
- bfd *abfd;
- asection *sec;
- fragS *fragP;
+md_convert_frag (bfd *abfd ATTRIBUTE_UNUSED,
+ asection *sec ATTRIBUTE_UNUSED,
+ fragS *fragP ATTRIBUTE_UNUSED)
{
abort ();
}
valueT
-md_section_align (seg, addr)
- asection *seg;
- valueT addr;
+md_section_align (asection *seg, valueT addr)
{
int align = bfd_get_section_alignment (stdoutput, seg);
return ((addr + (1 << align) - 1) & (-1 << align));
}
void
-md_begin ()
+md_begin (void)
{
struct d30v_opcode *opcode;
d30v_hash = hash_new ();
from an expression. */
static int
-postfix (p)
- char *p;
+postfix (char *p)
{
while (*p != '-' && *p != '+')
{
}
static bfd_reloc_code_real_type
-get_reloc (op, rel_flag)
- struct d30v_operand *op;
- int rel_flag;
+get_reloc (struct d30v_operand *op, int rel_flag)
{
switch (op->bits)
{
/* Parse a string of operands and return an array of expressions. */
static int
-get_operands (exp, cmp_hack)
- expressionS exp[];
- int cmp_hack;
+get_operands (expressionS exp[], int cmp_hack)
{
char *p = input_line_pointer;
int numops = 0;
It does everything but write the FM bits. */
static long long
-build_insn (opcode, opers)
- struct d30v_insn *opcode;
- expressionS *opers;
+build_insn (struct d30v_insn *opcode, expressionS *opers)
{
int i, length, bits, shift, flags;
unsigned long number, id = 0;
number = 0;
}
else if (number & OPERAND_FLAG)
- {
- /* NUMBER is a flag register. */
- id = 3;
- }
+ /* NUMBER is a flag register. */
+ id = 3;
+
number &= 0x7F;
}
else if (flags & OPERAND_SPECIAL)
- {
- number = id;
- }
+ number = id;
if (opers[i].X_op != O_register && opers[i].X_op != O_constant
&& !(flags & OPERAND_NAME))
/* Truncate to the proper number of bits. */
if ((opers[i].X_op == O_constant) && check_range (number, bits, flags))
- as_bad (_("operand out of range: %d"), number);
+ as_bad (_("operand out of range: %ld"), number);
if (bits < 31)
number &= 0x7FFFFFFF >> (31 - bits);
if (flags & OPERAND_SHIFT)
if (bits == 32)
{
/* It's a LONG instruction. */
- insn |= ((number & 0xffffffff) >> 26); /* top 6 bits */
- insn <<= 32; /* shift the first word over */
- insn |= ((number & 0x03FC0000) << 2); /* next 8 bits */
- insn |= number & 0x0003FFFF; /* bottom 18 bits */
+ insn |= ((number & 0xffffffff) >> 26); /* Top 6 bits. */
+ insn <<= 32; /* Shift the first word over. */
+ insn |= ((number & 0x03FC0000) << 2); /* Next 8 bits. */
+ insn |= number & 0x0003FFFF; /* Bottom 18 bits. */
}
else
insn |= number << shift;
return insn;
}
+static void
+d30v_number_to_chars (char *buf, /* Return 'nbytes' of chars here. */
+ long long value, /* The value of the bits. */
+ int n) /* Number of bytes in the output. */
+{
+ while (n--)
+ {
+ buf[n] = value & 0xff;
+ value >>= 8;
+ }
+}
+
/* Write out a long form instruction. */
static void
-write_long (opcode, insn, fx)
- struct d30v_insn *opcode;
- long long insn;
- Fixups *fx;
+write_long (struct d30v_insn *opcode ATTRIBUTE_UNUSED,
+ long long insn,
+ Fixups *fx)
{
int i, where;
char *f = frag_more (8);
if (fx->fix[i].reloc)
{
where = f - frag_now->fr_literal;
- fix_new_exp (frag_now,
- where,
- fx->fix[i].size,
- &(fx->fix[i].exp),
- fx->fix[i].pcrel,
- fx->fix[i].reloc);
+ fix_new_exp (frag_now, where, fx->fix[i].size, &(fx->fix[i].exp),
+ fx->fix[i].pcrel, fx->fix[i].reloc);
}
}
/* Write out a short form instruction by itself. */
static void
-write_1_short (opcode, insn, fx, use_sequential)
- struct d30v_insn *opcode;
- long long insn;
- Fixups *fx;
- int use_sequential;
+write_1_short (struct d30v_insn *opcode,
+ long long insn,
+ Fixups *fx,
+ int use_sequential)
{
char *f = frag_more (8);
int i, where;
/* According to 4.3.1: for FM=01, sub-instructions performed
only by IU cannot be encoded in L-container. */
-
if (opcode->op->unit == IU)
/* Right then left. */
insn |= FM10 | NOP_LEFT;
{
/* According to 4.3.1: for FM=00, sub-instructions performed
only by IU cannot be encoded in L-container. */
-
if (opcode->op->unit == IU)
/* Right container. */
insn |= FM00 | NOP_LEFT;
fx->fc = 0;
}
-/* Write out a short form instruction if possible.
- Return number of instructions not written out. */
-
-static int
-write_2_short (opcode1, insn1, opcode2, insn2, exec_type, fx)
- struct d30v_insn *opcode1, *opcode2;
- long long insn1, insn2;
- exec_type_enum exec_type;
- Fixups *fx;
-{
- long long insn = NOP2;
- char *f;
- int i, j, where;
-
- if (exec_type == EXEC_SEQ
- && (opcode1->op->flags_used & (FLAG_JMP | FLAG_JSR))
- && ((opcode1->op->flags_used & FLAG_DELAY) == 0)
- && ((opcode1->ecc == ECC_AL) || ! Optimizing))
- {
- /* Unconditional, non-delayed branches kill instructions in
- the right bin. Conditional branches don't always but if
- we are not optimizing, then we have been asked to produce
- an error about such constructs. For the purposes of this
- test, subroutine calls are considered to be branches. */
- write_1_short (opcode1, insn1, fx->next, false);
- return 1;
- }
-
- /* Note: we do not have to worry about subroutine calls occuring
- in the right hand container. The return address is always
- aligned to the next 64 bit boundary, be that 64 or 32 bit away. */
- switch (exec_type)
- {
- case EXEC_UNKNOWN: /* Order not specified. */
- if (Optimizing
- && parallel_ok (opcode1, insn1, opcode2, insn2, exec_type)
- && ! ( (opcode1->op->unit == EITHER_BUT_PREFER_MU
- || opcode1->op->unit == MU)
- &&
- ( opcode2->op->unit == EITHER_BUT_PREFER_MU
- || opcode2->op->unit == MU)))
- {
- /* Parallel. */
- exec_type = EXEC_PARALLEL;
-
- if (opcode1->op->unit == IU
- || opcode2->op->unit == MU
- || opcode2->op->unit == EITHER_BUT_PREFER_MU)
- insn = FM00 | (insn2 << 32) | insn1;
- else
- {
- insn = FM00 | (insn1 << 32) | insn2;
- fx = fx->next;
- }
- }
- else if ((opcode1->op->flags_used & (FLAG_JMP | FLAG_JSR)
- && ((opcode1->op->flags_used & FLAG_DELAY) == 0))
- || opcode1->op->flags_used & FLAG_RP)
- {
- /* We must emit (non-delayed) branch type instructions
- on their own with nothing in the right container. */
- /* We must treat repeat instructions likewise, since the
- following instruction has to be separate from the repeat
- in order to be repeated. */
- write_1_short (opcode1, insn1, fx->next, false);
- return 1;
- }
- else if (prev_left_kills_right_p)
- {
- /* The left instruction kils the right slot, so we
- must leave it empty. */
- write_1_short (opcode1, insn1, fx->next, false);
- return 1;
- }
- else if (opcode1->op->unit == IU)
- {
- if (opcode2->op->unit == EITHER_BUT_PREFER_MU)
- {
- /* Case 103810 is a request from Mitsubishi that opcodes
- with EITHER_BUT_PREFER_MU should not be executed in
- reverse sequential order. */
- write_1_short (opcode1, insn1, fx->next, false);
- return 1;
- }
-
- /* Reverse sequential. */
- insn = FM10 | (insn2 << 32) | insn1;
- exec_type = EXEC_REVSEQ;
- }
- else
- {
- /* Sequential. */
- insn = FM01 | (insn1 << 32) | insn2;
- fx = fx->next;
- exec_type = EXEC_SEQ;
- }
- break;
-
- case EXEC_PARALLEL: /* Parallel. */
- flag_explicitly_parallel = flag_xp_state;
- if (! parallel_ok (opcode1, insn1, opcode2, insn2, exec_type))
- as_bad (_("Instructions may not be executed in parallel"));
- else if (opcode1->op->unit == IU)
- {
- if (opcode2->op->unit == IU)
- as_bad (_("Two IU instructions may not be executed in parallel"));
- as_warn (_("Swapping instruction order"));
- insn = FM00 | (insn2 << 32) | insn1;
- }
- else if (opcode2->op->unit == MU)
- {
- if (opcode1->op->unit == MU)
- as_bad (_("Two MU instructions may not be executed in parallel"));
- else if (opcode1->op->unit == EITHER_BUT_PREFER_MU)
- as_warn (_("Executing %s in IU may not work"), opcode1->op->name);
- as_warn (_("Swapping instruction order"));
- insn = FM00 | (insn2 << 32) | insn1;
- }
- else
- {
- if (opcode2->op->unit == EITHER_BUT_PREFER_MU)
- as_warn (_("Executing %s in IU may not work in parallel execution"),
- opcode2->op->name);
-
- insn = FM00 | (insn1 << 32) | insn2;
- fx = fx->next;
- }
- flag_explicitly_parallel = 0;
- break;
-
- case EXEC_SEQ: /* Sequential. */
- if (opcode1->op->unit == IU)
- as_bad (_("IU instruction may not be in the left container"));
- if (prev_left_kills_right_p)
- as_bad (_("special left instruction `%s' kills instruction "
- "`%s' in right container"),
- opcode1->op->name, opcode2->op->name);
- insn = FM01 | (insn1 << 32) | insn2;
- fx = fx->next;
- break;
-
- case EXEC_REVSEQ: /* Reverse sequential. */
- if (opcode2->op->unit == MU)
- as_bad (_("MU instruction may not be in the right container"));
- if (opcode1->op->unit == EITHER_BUT_PREFER_MU)
- as_warn (_("Executing %s in reverse serial with %s may not work"),
- opcode1->op->name, opcode2->op->name);
- else if (opcode2->op->unit == EITHER_BUT_PREFER_MU)
- as_warn (_("Executing %s in IU in reverse serial may not work"),
- opcode2->op->name);
- insn = FM10 | (insn1 << 32) | insn2;
- fx = fx->next;
- break;
-
- default:
- as_fatal (_("unknown execution type passed to write_2_short()"));
- }
-
-#if 0
- printf ("writing out %llx\n", insn);
-#endif
- f = frag_more (8);
- d30v_number_to_chars (f, insn, 8);
-
- /* If the previous instruction was a 32-bit multiply but it is put into a
- parallel container, mark the current instruction as being a 32-bit
- multiply. */
- if (prev_mul32_p && exec_type == EXEC_PARALLEL)
- cur_mul32_p = 1;
-
- for (j = 0; j < 2; j++)
- {
- for (i = 0; i < fx->fc; i++)
- {
- if (fx->fix[i].reloc)
- {
- where = (f - frag_now->fr_literal) + 4 * j;
-
- fix_new_exp (frag_now,
- where,
- fx->fix[i].size,
- &(fx->fix[i].exp),
- fx->fix[i].pcrel,
- fx->fix[i].reloc);
- }
- }
-
- fx->fc = 0;
- fx = fx->next;
- }
-
- return 0;
-}
-
/* Check 2 instructions and determine if they can be safely
executed in parallel. Return 1 if they can be. */
static int
-parallel_ok (op1, insn1, op2, insn2, exec_type)
- struct d30v_insn *op1, *op2;
- unsigned long insn1, insn2;
- exec_type_enum exec_type;
+parallel_ok (struct d30v_insn *op1,
+ unsigned long insn1,
+ struct d30v_insn *op2,
+ unsigned long insn2,
+ exec_type_enum exec_type)
{
int i, j, shift, regno, bits, ecc;
unsigned long flags, mask, flags_set1, flags_set2, flags_used1, flags_used2;
return 0;
}
else
- if ((mod_reg[0][j] & (mod_reg[1][j] | used_reg[1][j])) != 0)
+ if ((mod_reg[0][j] & (mod_reg[1][j] | used_reg[1][j])) != 0)
return 0;
}
return 1;
}
-/* This is the main entry point for the machine-dependent assembler.
- STR points to a machine-dependent instruction. This function is
- supposed to emit the frags/bytes it assembles to. For the D30V, it
- mostly handles the special VLIW parsing and packing and leaves the
- difficult stuff to do_assemble (). */
-
-static long long prev_insn = -1;
-static struct d30v_insn prev_opcode;
-static subsegT prev_subseg;
-static segT prev_seg = 0;
+/* Write out a short form instruction if possible.
+ Return number of instructions not written out. */
-void
-md_assemble (str)
- char *str;
+static int
+write_2_short (struct d30v_insn *opcode1,
+ long long insn1,
+ struct d30v_insn *opcode2,
+ long long insn2,
+ exec_type_enum exec_type,
+ Fixups *fx)
{
- struct d30v_insn opcode;
- long long insn;
- /* Execution type; parallel, etc. */
- exec_type_enum extype = EXEC_UNKNOWN;
- /* Saved extype. Used for multiline instructions. */
- static exec_type_enum etype = EXEC_UNKNOWN;
- char *str2;
-
- if ((prev_insn != -1) && prev_seg
- && ((prev_seg != now_seg) || (prev_subseg != now_subseg)))
- d30v_cleanup (false);
+ long long insn = NOP2;
+ char *f;
+ int i, j, where;
- if (d30v_current_align < 3)
- d30v_align (3, NULL, d30v_last_label);
- else if (d30v_current_align > 3)
- d30v_current_align = 3;
- d30v_last_label = NULL;
+ if (exec_type == EXEC_SEQ
+ && (opcode1->op->flags_used & (FLAG_JMP | FLAG_JSR))
+ && ((opcode1->op->flags_used & FLAG_DELAY) == 0)
+ && ((opcode1->ecc == ECC_AL) || ! Optimizing))
+ {
+ /* Unconditional, non-delayed branches kill instructions in
+ the right bin. Conditional branches don't always but if
+ we are not optimizing, then we have been asked to produce
+ an error about such constructs. For the purposes of this
+ test, subroutine calls are considered to be branches. */
+ write_1_short (opcode1, insn1, fx->next, FALSE);
+ return 1;
+ }
- flag_explicitly_parallel = 0;
- flag_xp_state = 0;
- if (etype == EXEC_UNKNOWN)
+ /* Note: we do not have to worry about subroutine calls occurring
+ in the right hand container. The return address is always
+ aligned to the next 64 bit boundary, be that 64 or 32 bit away. */
+ switch (exec_type)
{
- /* Look for the special multiple instruction separators. */
- str2 = strstr (str, "||");
- if (str2)
- {
- extype = EXEC_PARALLEL;
- flag_xp_state = 1;
- }
- else
+ case EXEC_UNKNOWN: /* Order not specified. */
+ if (Optimizing
+ && parallel_ok (opcode1, insn1, opcode2, insn2, exec_type)
+ && ! ( (opcode1->op->unit == EITHER_BUT_PREFER_MU
+ || opcode1->op->unit == MU)
+ &&
+ ( opcode2->op->unit == EITHER_BUT_PREFER_MU
+ || opcode2->op->unit == MU)))
{
- str2 = strstr (str, "->");
- if (str2)
- extype = EXEC_SEQ;
+ /* Parallel. */
+ exec_type = EXEC_PARALLEL;
+
+ if (opcode1->op->unit == IU
+ || opcode2->op->unit == MU
+ || opcode2->op->unit == EITHER_BUT_PREFER_MU)
+ insn = FM00 | (insn2 << 32) | insn1;
else
{
- str2 = strstr (str, "<-");
- if (str2)
- extype = EXEC_REVSEQ;
+ insn = FM00 | (insn1 << 32) | insn2;
+ fx = fx->next;
}
}
+ else if ((opcode1->op->flags_used & (FLAG_JMP | FLAG_JSR)
+ && ((opcode1->op->flags_used & FLAG_DELAY) == 0))
+ || opcode1->op->flags_used & FLAG_RP)
+ {
+ /* We must emit (non-delayed) branch type instructions
+ on their own with nothing in the right container. */
+ /* We must treat repeat instructions likewise, since the
+ following instruction has to be separate from the repeat
+ in order to be repeated. */
+ write_1_short (opcode1, insn1, fx->next, FALSE);
+ return 1;
+ }
+ else if (prev_left_kills_right_p)
+ {
+ /* The left instruction kils the right slot, so we
+ must leave it empty. */
+ write_1_short (opcode1, insn1, fx->next, FALSE);
+ return 1;
+ }
+ else if (opcode1->op->unit == IU)
+ {
+ if (opcode2->op->unit == EITHER_BUT_PREFER_MU)
+ {
+ /* Case 103810 is a request from Mitsubishi that opcodes
+ with EITHER_BUT_PREFER_MU should not be executed in
+ reverse sequential order. */
+ write_1_short (opcode1, insn1, fx->next, FALSE);
+ return 1;
+ }
- /* STR2 points to the separator, if one. */
- if (str2)
+ /* Reverse sequential. */
+ insn = FM10 | (insn2 << 32) | insn1;
+ exec_type = EXEC_REVSEQ;
+ }
+ else
{
- *str2 = 0;
+ /* Sequential. */
+ insn = FM01 | (insn1 << 32) | insn2;
+ fx = fx->next;
+ exec_type = EXEC_SEQ;
+ }
+ break;
- /* If two instructions are present and we already have one saved,
- then first write it out. */
- d30v_cleanup (false);
+ case EXEC_PARALLEL: /* Parallel. */
+ flag_explicitly_parallel = flag_xp_state;
+ if (! parallel_ok (opcode1, insn1, opcode2, insn2, exec_type))
+ as_bad (_("Instructions may not be executed in parallel"));
+ else if (opcode1->op->unit == IU)
+ {
+ if (opcode2->op->unit == IU)
+ as_bad (_("Two IU instructions may not be executed in parallel"));
+ as_warn (_("Swapping instruction order"));
+ insn = FM00 | (insn2 << 32) | insn1;
+ }
+ else if (opcode2->op->unit == MU)
+ {
+ if (opcode1->op->unit == MU)
+ as_bad (_("Two MU instructions may not be executed in parallel"));
+ else if (opcode1->op->unit == EITHER_BUT_PREFER_MU)
+ as_warn (_("Executing %s in IU may not work"), opcode1->op->name);
+ as_warn (_("Swapping instruction order"));
+ insn = FM00 | (insn2 << 32) | insn1;
+ }
+ else
+ {
+ if (opcode2->op->unit == EITHER_BUT_PREFER_MU)
+ as_warn (_("Executing %s in IU may not work in parallel execution"),
+ opcode2->op->name);
- /* Assemble first instruction and save it. */
- prev_insn = do_assemble (str, &prev_opcode, 1, 0);
- if (prev_insn == -1)
- as_bad (_("Cannot assemble instruction"));
- if (prev_opcode.form != NULL && prev_opcode.form->form >= LONG)
- as_bad (_("First opcode is long. Unable to mix instructions as specified."));
- fixups = fixups->next;
- str = str2 + 2;
- prev_seg = now_seg;
- prev_subseg = now_subseg;
+ insn = FM00 | (insn1 << 32) | insn2;
+ fx = fx->next;
}
- }
+ flag_explicitly_parallel = 0;
+ break;
- insn = do_assemble (str, &opcode,
- (extype != EXEC_UNKNOWN || etype != EXEC_UNKNOWN),
- extype == EXEC_PARALLEL);
- if (insn == -1)
- {
- if (extype != EXEC_UNKNOWN)
- etype = extype;
- as_bad (_("Cannot assemble instruction"));
- return;
- }
+ case EXEC_SEQ: /* Sequential. */
+ if (opcode1->op->unit == IU)
+ as_bad (_("IU instruction may not be in the left container"));
+ if (prev_left_kills_right_p)
+ as_bad (_("special left instruction `%s' kills instruction "
+ "`%s' in right container"),
+ opcode1->op->name, opcode2->op->name);
+ insn = FM01 | (insn1 << 32) | insn2;
+ fx = fx->next;
+ break;
- if (etype != EXEC_UNKNOWN)
- {
- extype = etype;
- etype = EXEC_UNKNOWN;
+ case EXEC_REVSEQ: /* Reverse sequential. */
+ if (opcode2->op->unit == MU)
+ as_bad (_("MU instruction may not be in the right container"));
+ if (opcode1->op->unit == EITHER_BUT_PREFER_MU)
+ as_warn (_("Executing %s in reverse serial with %s may not work"),
+ opcode1->op->name, opcode2->op->name);
+ else if (opcode2->op->unit == EITHER_BUT_PREFER_MU)
+ as_warn (_("Executing %s in IU in reverse serial may not work"),
+ opcode2->op->name);
+ insn = FM10 | (insn1 << 32) | insn2;
+ fx = fx->next;
+ break;
+
+ default:
+ as_fatal (_("unknown execution type passed to write_2_short()"));
}
- /* Word multiply instructions must not be followed by either a load or a
- 16-bit multiply instruction in the next cycle. */
- if ( (extype != EXEC_REVSEQ)
- && prev_mul32_p
- && (opcode.op->flags_used & (FLAG_MEM | FLAG_MUL16)))
+ f = frag_more (8);
+ d30v_number_to_chars (f, insn, 8);
+
+ /* If the previous instruction was a 32-bit multiply but it is put into a
+ parallel container, mark the current instruction as being a 32-bit
+ multiply. */
+ if (prev_mul32_p && exec_type == EXEC_PARALLEL)
+ cur_mul32_p = 1;
+
+ for (j = 0; j < 2; j++)
{
- /* However, load and multiply should able to be combined in a parallel
- operation, so check for that first. */
- if (prev_insn != -1
- && (opcode.op->flags_used & FLAG_MEM)
- && opcode.form->form < LONG
- && (extype == EXEC_PARALLEL || (Optimizing && extype == EXEC_UNKNOWN))
- && parallel_ok (&prev_opcode, (long) prev_insn,
- &opcode, (long) insn, extype)
- && write_2_short (&prev_opcode, (long) prev_insn,
- &opcode, (long) insn, extype, fixups) == 0)
- {
- /* No instructions saved. */
- prev_insn = -1;
- return;
- }
- else
+ for (i = 0; i < fx->fc; i++)
{
- /* Can't parallelize, flush previous instruction and emit a
- word of NOPS, unless the previous instruction is a NOP,
- in which case just flush it, as this will generate a word
- of NOPs for us. */
-
- if (prev_insn != -1 && (strcmp (prev_opcode.op->name, "nop") == 0))
- d30v_cleanup (false);
- else
+ if (fx->fix[i].reloc)
{
- char *f;
-
- if (prev_insn != -1)
- d30v_cleanup (true);
- else
- {
- f = frag_more (8);
- d30v_number_to_chars (f, NOP2, 8);
+ where = (f - frag_now->fr_literal) + 4 * j;
- if (warn_nops == NOP_ALL || warn_nops == NOP_MULTIPLY)
- {
- if (opcode.op->flags_used & FLAG_MEM)
- as_warn (_("word of NOPs added between word multiply and load"));
- else
- as_warn (_("word of NOPs added between word multiply and 16-bit multiply"));
- }
- }
+ fix_new_exp (frag_now,
+ where,
+ fx->fix[i].size,
+ &(fx->fix[i].exp),
+ fx->fix[i].pcrel,
+ fx->fix[i].reloc);
}
-
- extype = EXEC_UNKNOWN;
}
- }
- else if ( (extype == EXEC_REVSEQ)
- && cur_mul32_p
- && (prev_opcode.op->flags_used & (FLAG_MEM | FLAG_MUL16)))
- {
- /* Can't parallelize, flush current instruction and add a
- sequential NOP. */
- write_1_short (&opcode, (long) insn, fixups->next->next, true);
- /* Make the previous instruction the current one. */
- extype = EXEC_UNKNOWN;
- insn = prev_insn;
- now_seg = prev_seg;
- now_subseg = prev_subseg;
- prev_insn = -1;
- cur_mul32_p = prev_mul32_p;
- prev_mul32_p = 0;
- memcpy (&opcode, &prev_opcode, sizeof (prev_opcode));
+ fx->fc = 0;
+ fx = fx->next;
}
- /* If this is a long instruction, write it and any previous short
- instruction. */
- if (opcode.form->form >= LONG)
- {
- if (extype != EXEC_UNKNOWN)
- as_bad (_("Instruction uses long version, so it cannot be mixed as specified"));
- d30v_cleanup (false);
- write_long (&opcode, insn, fixups);
- prev_insn = -1;
- }
- else if ((prev_insn != -1)
- && (write_2_short
- (&prev_opcode, (long) prev_insn, &opcode,
- (long) insn, extype, fixups) == 0))
- {
- /* No instructions saved. */
- prev_insn = -1;
- }
- else
+ return 0;
+}
+
+/* Get a pointer to an entry in the format table.
+ It must look at all formats for an opcode and use the operands
+ to choose the correct one. Return NULL on error. */
+
+static struct d30v_format *
+find_format (struct d30v_opcode *opcode,
+ expressionS myops[],
+ int fsize,
+ int cmp_hack)
+{
+ int numops, match, index, i = 0, j, k;
+ struct d30v_format *fm;
+
+ if (opcode == NULL)
+ return NULL;
+
+ /* Get all the operands and save them as expressions. */
+ numops = get_operands (myops, cmp_hack);
+
+ while ((index = opcode->format[i++]) != 0)
{
- if (extype != EXEC_UNKNOWN)
- as_bad (_("Unable to mix instructions as specified"));
+ if (fsize == FORCE_SHORT && index >= LONG)
+ continue;
- /* Save off last instruction so it may be packed on next pass. */
- memcpy (&prev_opcode, &opcode, sizeof (prev_opcode));
- prev_insn = insn;
- prev_seg = now_seg;
- prev_subseg = now_subseg;
- fixups = fixups->next;
- prev_mul32_p = cur_mul32_p;
+ if (fsize == FORCE_LONG && index < LONG)
+ continue;
+
+ fm = (struct d30v_format *) &d30v_format_table[index];
+ k = index;
+ while (fm->form == index)
+ {
+ match = 1;
+ /* Now check the operands for compatibility. */
+ for (j = 0; match && fm->operands[j]; j++)
+ {
+ int flags = d30v_operand_table[fm->operands[j]].flags;
+ int bits = d30v_operand_table[fm->operands[j]].bits;
+ int X_op = myops[j].X_op;
+ int num = myops[j].X_add_number;
+
+ if (flags & OPERAND_SPECIAL)
+ break;
+ else if (X_op == O_illegal)
+ match = 0;
+ else if (flags & OPERAND_REG)
+ {
+ if (X_op != O_register
+ || ((flags & OPERAND_ACC) && !(num & OPERAND_ACC))
+ || (!(flags & OPERAND_ACC) && (num & OPERAND_ACC))
+ || ((flags & OPERAND_FLAG) && !(num & OPERAND_FLAG))
+ || (!(flags & (OPERAND_FLAG | OPERAND_CONTROL)) && (num & OPERAND_FLAG))
+ || ((flags & OPERAND_CONTROL)
+ && !(num & (OPERAND_CONTROL | OPERAND_FLAG))))
+ match = 0;
+ }
+ else if (((flags & OPERAND_MINUS)
+ && (X_op != O_absent || num != OPERAND_MINUS))
+ || ((flags & OPERAND_PLUS)
+ && (X_op != O_absent || num != OPERAND_PLUS))
+ || ((flags & OPERAND_ATMINUS)
+ && (X_op != O_absent || num != OPERAND_ATMINUS))
+ || ((flags & OPERAND_ATPAR)
+ && (X_op != O_absent || num != OPERAND_ATPAR))
+ || ((flags & OPERAND_ATSIGN)
+ && (X_op != O_absent || num != OPERAND_ATSIGN)))
+ match = 0;
+ else if (flags & OPERAND_NUM)
+ {
+ /* A number can be a constant or symbol expression. */
+
+ /* If we have found a register name, but that name
+ also matches a symbol, then re-parse the name as
+ an expression. */
+ if (X_op == O_register
+ && symbol_find ((char *) myops[j].X_op_symbol))
+ {
+ input_line_pointer = (char *) myops[j].X_op_symbol;
+ expression (&myops[j]);
+ }
+
+ /* Turn an expression into a symbol for later resolution. */
+ if (X_op != O_absent && X_op != O_constant
+ && X_op != O_symbol && X_op != O_register
+ && X_op != O_big)
+ {
+ symbolS *sym = make_expr_symbol (&myops[j]);
+ myops[j].X_op = X_op = O_symbol;
+ myops[j].X_add_symbol = sym;
+ myops[j].X_add_number = num = 0;
+ }
+
+ if (fm->form >= LONG)
+ {
+ /* If we're testing for a LONG format, either fits. */
+ if (X_op != O_constant && X_op != O_symbol)
+ match = 0;
+ }
+ else if (fm->form < LONG
+ && ((fsize == FORCE_SHORT && X_op == O_symbol)
+ || (fm->form == SHORT_D2 && j == 0)))
+ match = 1;
+
+ /* This is the tricky part. Will the constant or symbol
+ fit into the space in the current format? */
+ else if (X_op == O_constant)
+ {
+ if (check_range (num, bits, flags))
+ match = 0;
+ }
+ else if (X_op == O_symbol
+ && S_IS_DEFINED (myops[j].X_add_symbol)
+ && S_GET_SEGMENT (myops[j].X_add_symbol) == now_seg
+ && opcode->reloc_flag == RELOC_PCREL)
+ {
+ /* If the symbol is defined, see if the value will fit
+ into the form we're considering. */
+ fragS *f;
+ long value;
+
+ /* Calculate the current address by running through the
+ previous frags and adding our current offset. */
+ value = 0;
+ for (f = frchain_now->frch_root; f; f = f->fr_next)
+ value += f->fr_fix + f->fr_offset;
+ value = (S_GET_VALUE (myops[j].X_add_symbol) - value
+ - (obstack_next_free (&frchain_now->frch_obstack)
+ - frag_now->fr_literal));
+ if (check_range (value, bits, flags))
+ match = 0;
+ }
+ else
+ match = 0;
+ }
+ }
+ /* We're only done if the operands matched so far AND there
+ are no more to check. */
+ if (match && myops[j].X_op == 0)
+ {
+ /* Final check - issue a warning if an odd numbered register
+ is used as the first register in an instruction that reads
+ or writes 2 registers. */
+
+ for (j = 0; fm->operands[j]; j++)
+ if (myops[j].X_op == O_register
+ && (myops[j].X_add_number & 1)
+ && (d30v_operand_table[fm->operands[j]].flags & OPERAND_2REG))
+ as_warn (_("Odd numbered register used as target of multi-register instruction"));
+
+ return fm;
+ }
+ fm = (struct d30v_format *) &d30v_format_table[++k];
+ }
}
+ return NULL;
}
/* Assemble a single instruction and return an opcode.
#define NAME_BUF_LEN 20
static long long
-do_assemble (str, opcode, shortp, is_parallel)
- char *str;
- struct d30v_insn *opcode;
- int shortp;
- int is_parallel;
+do_assemble (char *str,
+ struct d30v_insn *opcode,
+ int shortp,
+ int is_parallel)
{
- unsigned char *op_start;
- unsigned char *save;
- unsigned char *op_end;
+ char *op_start;
+ char *save;
+ char *op_end;
char name[NAME_BUF_LEN];
int cmp_hack;
int nlen = 0;
str++;
/* Find the opcode end. */
- for (op_start = op_end = (unsigned char *) (str);
+ for (op_start = op_end = str;
*op_end
&& nlen < (NAME_BUF_LEN - 1)
&& *op_end != '/'
- && !is_end_of_line[*op_end] && *op_end != ' ';
+ && !is_end_of_line[(unsigned char) *op_end] && *op_end != ' ';
op_end++)
{
name[nlen] = TOLOWER (op_start[nlen]);
as_bad (_("unknown condition code: %s"), tmp);
return -1;
}
-#if 0
- printf ("condition code=%d\n", i);
-#endif
opcode->ecc = i;
op_end += 3;
}
else
cmp_hack = 0;
-#if 0
- printf ("cmp_hack=%d\n", cmp_hack);
-#endif
-
/* Need to look for .s or .l. */
if (name[nlen - 2] == '.')
{
insn = build_insn (opcode, myops);
- /* Propigate multiply status. */
+ /* Propagate multiply status. */
if (insn != -1)
{
if (is_parallel && prev_mul32_p)
return insn;
}
-/* Get a pointer to an entry in the format table.
- It must look at all formats for an opcode and use the operands
- to choose the correct one. Return NULL on error. */
+/* Called internally to handle all alignment needs. This takes care
+ of eliding calls to frag_align if'n the cached current alignment
+ says we've already got it, as well as taking care of the auto-aligning
+ labels wrt code. */
-static struct d30v_format *
-find_format (opcode, myops, fsize, cmp_hack)
- struct d30v_opcode *opcode;
- expressionS myops[];
- int fsize;
- int cmp_hack;
+static void
+d30v_align (int n, char *pfill, symbolS *label)
{
- int numops, match, index, i = 0, j, k;
- struct d30v_format *fm;
+ /* The front end is prone to changing segments out from under us
+ temporarily when -g is in effect. */
+ int switched_seg_p = (d30v_current_align_seg != now_seg);
- if (opcode == NULL)
- return NULL;
+ /* Do not assume that if 'd30v_current_align >= n' and
+ '! switched_seg_p' that it is safe to avoid performing
+ this alignment request. The alignment of the current frag
+ can be changed under our feet, for example by a .ascii
+ directive in the source code. cf testsuite/gas/d30v/reloc.s */
+ d30v_cleanup (FALSE);
- /* Get all the operands and save them as expressions. */
- numops = get_operands (myops, cmp_hack);
+ if (pfill == NULL)
+ {
+ if (n > 2
+ && (bfd_get_section_flags (stdoutput, now_seg) & SEC_CODE) != 0)
+ {
+ static char const nop[4] = { 0x00, 0xf0, 0x00, 0x00 };
- while ((index = opcode->format[i++]) != 0)
+ /* First, make sure we're on a four-byte boundary, in case
+ someone has been putting .byte values the text section. */
+ if (d30v_current_align < 2 || switched_seg_p)
+ frag_align (2, 0, 0);
+ frag_align_pattern (n, nop, sizeof nop, 0);
+ }
+ else
+ frag_align (n, 0, 0);
+ }
+ else
+ frag_align (n, *pfill, 0);
+
+ if (!switched_seg_p)
+ d30v_current_align = n;
+
+ if (label != NULL)
{
- if (fsize == FORCE_SHORT && index >= LONG)
- continue;
+ symbolS *sym;
+ int label_seen = FALSE;
+ struct frag *old_frag;
+ valueT old_value;
+ valueT new_value;
- if (fsize == FORCE_LONG && index < LONG)
- continue;
+ assert (S_GET_SEGMENT (label) == now_seg);
- fm = (struct d30v_format *) &d30v_format_table[index];
- k = index;
- while (fm->form == index)
+ old_frag = symbol_get_frag (label);
+ old_value = S_GET_VALUE (label);
+ new_value = (valueT) frag_now_fix ();
+
+ /* It is possible to have more than one label at a particular
+ address, especially if debugging is enabled, so we must
+ take care to adjust all the labels at this address in this
+ fragment. To save time we search from the end of the symbol
+ list, backwards, since the symbols we are interested in are
+ almost certainly the ones that were most recently added.
+ Also to save time we stop searching once we have seen at least
+ one matching label, and we encounter a label that is no longer
+ in the target fragment. Note, this search is guaranteed to
+ find at least one match when sym == label, so no special case
+ code is necessary. */
+ for (sym = symbol_lastP; sym != NULL; sym = symbol_previous (sym))
{
- match = 1;
- /* Now check the operands for compatibility. */
- for (j = 0; match && fm->operands[j]; j++)
+ if (symbol_get_frag (sym) == old_frag
+ && S_GET_VALUE (sym) == old_value)
{
- int flags = d30v_operand_table[fm->operands[j]].flags;
- int bits = d30v_operand_table[fm->operands[j]].bits;
- int X_op = myops[j].X_op;
- int num = myops[j].X_add_number;
+ label_seen = TRUE;
+ symbol_set_frag (sym, frag_now);
+ S_SET_VALUE (sym, new_value);
+ }
+ else if (label_seen && symbol_get_frag (sym) != old_frag)
+ break;
+ }
+ }
- if (flags & OPERAND_SPECIAL)
- break;
- else if (X_op == O_illegal)
- match = 0;
- else if (flags & OPERAND_REG)
- {
- if (X_op != O_register
- || ((flags & OPERAND_ACC) && !(num & OPERAND_ACC))
- || (!(flags & OPERAND_ACC) && (num & OPERAND_ACC))
- || ((flags & OPERAND_FLAG) && !(num & OPERAND_FLAG))
- || (!(flags & (OPERAND_FLAG | OPERAND_CONTROL)) && (num & OPERAND_FLAG))
- || ((flags & OPERAND_CONTROL)
- && !(num & (OPERAND_CONTROL | OPERAND_FLAG))))
- {
- match = 0;
- }
- }
- else if (((flags & OPERAND_MINUS)
- && (X_op != O_absent || num != OPERAND_MINUS))
- || ((flags & OPERAND_PLUS)
- && (X_op != O_absent || num != OPERAND_PLUS))
- || ((flags & OPERAND_ATMINUS)
- && (X_op != O_absent || num != OPERAND_ATMINUS))
- || ((flags & OPERAND_ATPAR)
- && (X_op != O_absent || num != OPERAND_ATPAR))
- || ((flags & OPERAND_ATSIGN)
- && (X_op != O_absent || num != OPERAND_ATSIGN)))
- {
- match = 0;
- }
- else if (flags & OPERAND_NUM)
- {
- /* A number can be a constant or symbol expression. */
+ record_alignment (now_seg, n);
+}
- /* If we have found a register name, but that name
- also matches a symbol, then re-parse the name as
- an expression. */
- if (X_op == O_register
- && symbol_find ((char *) myops[j].X_op_symbol))
- {
- input_line_pointer = (char *) myops[j].X_op_symbol;
- expression (&myops[j]);
- }
+/* This is the main entry point for the machine-dependent assembler.
+ STR points to a machine-dependent instruction. This function is
+ supposed to emit the frags/bytes it assembles to. For the D30V, it
+ mostly handles the special VLIW parsing and packing and leaves the
+ difficult stuff to do_assemble (). */
- /* Turn an expression into a symbol for later resolution. */
- if (X_op != O_absent && X_op != O_constant
- && X_op != O_symbol && X_op != O_register
- && X_op != O_big)
- {
- symbolS *sym = make_expr_symbol (&myops[j]);
- myops[j].X_op = X_op = O_symbol;
- myops[j].X_add_symbol = sym;
- myops[j].X_add_number = num = 0;
- }
+static long long prev_insn = -1;
+static struct d30v_insn prev_opcode;
+static subsegT prev_subseg;
+static segT prev_seg = 0;
- if (fm->form >= LONG)
- {
- /* If we're testing for a LONG format, either fits. */
- if (X_op != O_constant && X_op != O_symbol)
- match = 0;
- }
- else if (fm->form < LONG
- && ((fsize == FORCE_SHORT && X_op == O_symbol)
- || (fm->form == SHORT_D2 && j == 0)))
- match = 1;
+void
+md_assemble (char *str)
+{
+ struct d30v_insn opcode;
+ long long insn;
+ /* Execution type; parallel, etc. */
+ exec_type_enum extype = EXEC_UNKNOWN;
+ /* Saved extype. Used for multiline instructions. */
+ static exec_type_enum etype = EXEC_UNKNOWN;
+ char *str2;
- /* This is the tricky part. Will the constant or symbol
- fit into the space in the current format? */
- else if (X_op == O_constant)
- {
- if (check_range (num, bits, flags))
- match = 0;
- }
- else if (X_op == O_symbol
- && S_IS_DEFINED (myops[j].X_add_symbol)
- && S_GET_SEGMENT (myops[j].X_add_symbol) == now_seg
- && opcode->reloc_flag == RELOC_PCREL)
- {
- /* If the symbol is defined, see if the value will fit
- into the form we're considering. */
- fragS *f;
- long value;
+ if ((prev_insn != -1) && prev_seg
+ && ((prev_seg != now_seg) || (prev_subseg != now_subseg)))
+ d30v_cleanup (FALSE);
- /* Calculate the current address by running through the
- previous frags and adding our current offset. */
- value = 0;
- for (f = frchain_now->frch_root; f; f = f->fr_next)
- value += f->fr_fix + f->fr_offset;
- value = (S_GET_VALUE (myops[j].X_add_symbol) - value
- - (obstack_next_free (&frchain_now->frch_obstack)
- - frag_now->fr_literal));
- if (check_range (value, bits, flags))
- match = 0;
- }
- else
- match = 0;
- }
+ if (d30v_current_align < 3)
+ d30v_align (3, NULL, d30v_last_label);
+ else if (d30v_current_align > 3)
+ d30v_current_align = 3;
+ d30v_last_label = NULL;
+
+ flag_explicitly_parallel = 0;
+ flag_xp_state = 0;
+ if (etype == EXEC_UNKNOWN)
+ {
+ /* Look for the special multiple instruction separators. */
+ str2 = strstr (str, "||");
+ if (str2)
+ {
+ extype = EXEC_PARALLEL;
+ flag_xp_state = 1;
+ }
+ else
+ {
+ str2 = strstr (str, "->");
+ if (str2)
+ extype = EXEC_SEQ;
+ else
+ {
+ str2 = strstr (str, "<-");
+ if (str2)
+ extype = EXEC_REVSEQ;
}
-#if 0
- printf ("through the loop: match=%d\n", match);
-#endif
- /* We're only done if the operands matched so far AND there
- are no more to check. */
- if (match && myops[j].X_op == 0)
+ }
+
+ /* STR2 points to the separator, if one. */
+ if (str2)
+ {
+ *str2 = 0;
+
+ /* If two instructions are present and we already have one saved,
+ then first write it out. */
+ d30v_cleanup (FALSE);
+
+ /* Assemble first instruction and save it. */
+ prev_insn = do_assemble (str, &prev_opcode, 1, 0);
+ if (prev_insn == -1)
+ as_bad (_("Cannot assemble instruction"));
+ if (prev_opcode.form != NULL && prev_opcode.form->form >= LONG)
+ as_bad (_("First opcode is long. Unable to mix instructions as specified."));
+ fixups = fixups->next;
+ str = str2 + 2;
+ prev_seg = now_seg;
+ prev_subseg = now_subseg;
+ }
+ }
+
+ insn = do_assemble (str, &opcode,
+ (extype != EXEC_UNKNOWN || etype != EXEC_UNKNOWN),
+ extype == EXEC_PARALLEL);
+ if (insn == -1)
+ {
+ if (extype != EXEC_UNKNOWN)
+ etype = extype;
+ as_bad (_("Cannot assemble instruction"));
+ return;
+ }
+
+ if (etype != EXEC_UNKNOWN)
+ {
+ extype = etype;
+ etype = EXEC_UNKNOWN;
+ }
+
+ /* Word multiply instructions must not be followed by either a load or a
+ 16-bit multiply instruction in the next cycle. */
+ if ( (extype != EXEC_REVSEQ)
+ && prev_mul32_p
+ && (opcode.op->flags_used & (FLAG_MEM | FLAG_MUL16)))
+ {
+ /* However, load and multiply should able to be combined in a parallel
+ operation, so check for that first. */
+ if (prev_insn != -1
+ && (opcode.op->flags_used & FLAG_MEM)
+ && opcode.form->form < LONG
+ && (extype == EXEC_PARALLEL || (Optimizing && extype == EXEC_UNKNOWN))
+ && parallel_ok (&prev_opcode, (long) prev_insn,
+ &opcode, (long) insn, extype)
+ && write_2_short (&prev_opcode, (long) prev_insn,
+ &opcode, (long) insn, extype, fixups) == 0)
+ {
+ /* No instructions saved. */
+ prev_insn = -1;
+ return;
+ }
+ else
+ {
+ /* Can't parallelize, flush previous instruction and emit a
+ word of NOPS, unless the previous instruction is a NOP,
+ in which case just flush it, as this will generate a word
+ of NOPs for us. */
+
+ if (prev_insn != -1 && (strcmp (prev_opcode.op->name, "nop") == 0))
+ d30v_cleanup (FALSE);
+ else
{
- /* Final check - issue a warning if an odd numbered register
- is used as the first register in an instruction that reads
- or writes 2 registers. */
+ char *f;
- for (j = 0; fm->operands[j]; j++)
- if (myops[j].X_op == O_register
- && (myops[j].X_add_number & 1)
- && (d30v_operand_table[fm->operands[j]].flags & OPERAND_2REG))
- as_warn (_("Odd numbered register used as target of multi-register instruction"));
+ if (prev_insn != -1)
+ d30v_cleanup (TRUE);
+ else
+ {
+ f = frag_more (8);
+ d30v_number_to_chars (f, NOP2, 8);
- return fm;
+ if (warn_nops == NOP_ALL || warn_nops == NOP_MULTIPLY)
+ {
+ if (opcode.op->flags_used & FLAG_MEM)
+ as_warn (_("word of NOPs added between word multiply and load"));
+ else
+ as_warn (_("word of NOPs added between word multiply and 16-bit multiply"));
+ }
+ }
}
- fm = (struct d30v_format *) &d30v_format_table[++k];
+
+ extype = EXEC_UNKNOWN;
}
-#if 0
- printf ("trying another format: i=%d\n", i);
-#endif
}
- return NULL;
+ else if ( (extype == EXEC_REVSEQ)
+ && cur_mul32_p
+ && (prev_opcode.op->flags_used & (FLAG_MEM | FLAG_MUL16)))
+ {
+ /* Can't parallelize, flush current instruction and add a
+ sequential NOP. */
+ write_1_short (&opcode, (long) insn, fixups->next->next, TRUE);
+
+ /* Make the previous instruction the current one. */
+ extype = EXEC_UNKNOWN;
+ insn = prev_insn;
+ now_seg = prev_seg;
+ now_subseg = prev_subseg;
+ prev_insn = -1;
+ cur_mul32_p = prev_mul32_p;
+ prev_mul32_p = 0;
+ memcpy (&opcode, &prev_opcode, sizeof (prev_opcode));
+ }
+
+ /* If this is a long instruction, write it and any previous short
+ instruction. */
+ if (opcode.form->form >= LONG)
+ {
+ if (extype != EXEC_UNKNOWN)
+ as_bad (_("Instruction uses long version, so it cannot be mixed as specified"));
+ d30v_cleanup (FALSE);
+ write_long (&opcode, insn, fixups);
+ prev_insn = -1;
+ }
+ else if ((prev_insn != -1)
+ && (write_2_short
+ (&prev_opcode, (long) prev_insn, &opcode,
+ (long) insn, extype, fixups) == 0))
+ {
+ /* No instructions saved. */
+ prev_insn = -1;
+ }
+ else
+ {
+ if (extype != EXEC_UNKNOWN)
+ as_bad (_("Unable to mix instructions as specified"));
+
+ /* Save off last instruction so it may be packed on next pass. */
+ memcpy (&prev_opcode, &opcode, sizeof (prev_opcode));
+ prev_insn = insn;
+ prev_seg = now_seg;
+ prev_subseg = now_subseg;
+ fixups = fixups->next;
+ prev_mul32_p = cur_mul32_p;
+ }
+}
+
+/* If while processing a fixup, a reloc really needs to be created,
+ then it is done here. */
+
+arelent *
+tc_gen_reloc (asection *seg ATTRIBUTE_UNUSED, fixS *fixp)
+{
+ arelent *reloc;
+ reloc = xmalloc (sizeof (arelent));
+ reloc->sym_ptr_ptr = xmalloc (sizeof (asymbol *));
+ *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
+ reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
+ reloc->howto = bfd_reloc_type_lookup (stdoutput, fixp->fx_r_type);
+ if (reloc->howto == NULL)
+ {
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("reloc %d not supported by object file format"),
+ (int) fixp->fx_r_type);
+ return NULL;
+ }
+
+ reloc->addend = 0;
+ return reloc;
+}
+
+int
+md_estimate_size_before_relax (fragS *fragp ATTRIBUTE_UNUSED,
+ asection *seg ATTRIBUTE_UNUSED)
+{
+ abort ();
+ return 0;
+}
+
+long
+md_pcrel_from_section (fixS *fixp, segT sec)
+{
+ if (fixp->fx_addsy != (symbolS *) NULL
+ && (!S_IS_DEFINED (fixp->fx_addsy)
+ || (S_GET_SEGMENT (fixp->fx_addsy) != sec)))
+ return 0;
+ return fixp->fx_frag->fr_address + fixp->fx_where;
}
-/* If while processing a fixup, a reloc really needs to be created,
- then it is done here. */
+/* Called after the assembler has finished parsing the input file or
+ after a label is defined. Because the D30V assembler sometimes
+ saves short instructions to see if it can package them with the
+ next instruction, there may be a short instruction that still needs
+ written. */
+
+int
+d30v_cleanup (int use_sequential)
+{
+ segT seg;
+ subsegT subseg;
+
+ if (prev_insn != -1)
+ {
+ seg = now_seg;
+ subseg = now_subseg;
+ subseg_set (prev_seg, prev_subseg);
+ write_1_short (&prev_opcode, (long) prev_insn, fixups->next,
+ use_sequential);
+ subseg_set (seg, subseg);
+ prev_insn = -1;
+ if (use_sequential)
+ prev_mul32_p = FALSE;
+ }
+
+ return 1;
+}
+
+/* This function is called at the start of every line. It checks to
+ see if the first character is a '.', which indicates the start of a
+ pseudo-op. If it is, then write out any unwritten instructions. */
+
+void
+d30v_start_line (void)
+{
+ char *c = input_line_pointer;
+
+ while (ISSPACE (*c))
+ c++;
+
+ if (*c == '.')
+ d30v_cleanup (FALSE);
+}
+
+static void
+check_size (long value, int bits, char *file, int line)
+{
+ int tmp, max;
+
+ if (value < 0)
+ tmp = ~value;
+ else
+ tmp = value;
+
+ max = (1 << (bits - 1)) - 1;
-arelent *
-tc_gen_reloc (seg, fixp)
- asection *seg;
- fixS *fixp;
-{
- arelent *reloc;
- reloc = (arelent *) xmalloc (sizeof (arelent));
- reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
- *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
- reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
- reloc->howto = bfd_reloc_type_lookup (stdoutput, fixp->fx_r_type);
- if (reloc->howto == (reloc_howto_type *) NULL)
- {
- as_bad_where (fixp->fx_file, fixp->fx_line,
- _("reloc %d not supported by object file format"),
- (int) fixp->fx_r_type);
- return NULL;
- }
- reloc->addend = fixp->fx_addnumber;
- return reloc;
+ if (tmp > max)
+ as_bad_where (file, line, _("value too large to fit in %d bits"), bits);
}
-int
-md_estimate_size_before_relax (fragp, seg)
- fragS *fragp;
- asection *seg;
+/* d30v_frob_label() is called when after a label is recognized. */
+
+void
+d30v_frob_label (symbolS *lab)
{
- abort ();
- return 0;
+ /* Emit any pending instructions. */
+ d30v_cleanup (FALSE);
+
+ /* Update the label's address with the current output pointer. */
+ symbol_set_frag (lab, frag_now);
+ S_SET_VALUE (lab, (valueT) frag_now_fix ());
+
+ /* Record this label for future adjustment after we find out what
+ kind of data it references, and the required alignment therewith. */
+ d30v_last_label = lab;
}
-long
-md_pcrel_from_section (fixp, sec)
- fixS *fixp;
- segT sec;
+/* Hook into cons for capturing alignment changes. */
+
+void
+d30v_cons_align (int size)
{
- if (fixp->fx_addsy != (symbolS *) NULL
- && (!S_IS_DEFINED (fixp->fx_addsy)
- || (S_GET_SEGMENT (fixp->fx_addsy) != sec)))
- return 0;
- return fixp->fx_frag->fr_address + fixp->fx_where;
+ int log_size;
+
+ log_size = 0;
+ while ((size >>= 1) != 0)
+ ++log_size;
+
+ if (d30v_current_align < log_size)
+ d30v_align (log_size, (char *) NULL, NULL);
+ else if (d30v_current_align > log_size)
+ d30v_current_align = log_size;
+ d30v_last_label = NULL;
}
void
-md_apply_fix3 (fixP, valP, seg)
- fixS *fixP;
- valueT * valP;
- segT seg;
+md_apply_fix (fixS *fixP, valueT *valP, segT seg ATTRIBUTE_UNUSED)
{
char *where;
unsigned long insn, insn2;
- long value = * (long *) valP;
+ long value = *valP;
if (fixP->fx_addsy == (symbolS *) NULL)
fixP->fx_done = 1;
- else if (fixP->fx_pcrel)
- ;
-
- else
- {
- value = fixP->fx_offset;
-
- if (fixP->fx_subsy != (symbolS *) NULL)
- {
- if (S_GET_SEGMENT (fixP->fx_subsy) == absolute_section)
- value -= S_GET_VALUE (fixP->fx_subsy);
- else
- /* We don't actually support subtracting a symbol. */
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("expression too complex"));
- }
- }
+ /* We don't support subtracting a symbol. */
+ if (fixP->fx_subsy != (symbolS *) NULL)
+ as_bad_where (fixP->fx_file, fixP->fx_line, _("expression too complex"));
/* Fetch the instruction, insert the fully resolved operand
value, and stuff the instruction back again. */
as_bad (_("line %d: unable to place address of symbol '%s' into a byte"),
fixP->fx_line, S_GET_NAME (fixP->fx_addsy));
else if (((unsigned)value) > 0xff)
- as_bad (_("line %d: unable to place value %x into a byte"),
+ as_bad (_("line %d: unable to place value %lx into a byte"),
fixP->fx_line, value);
else
*(unsigned char *) where = value;
as_bad (_("line %d: unable to place address of symbol '%s' into a short"),
fixP->fx_line, S_GET_NAME (fixP->fx_addsy));
else if (((unsigned)value) > 0xffff)
- as_bad (_("line %d: unable to place value %x into a short"),
+ as_bad (_("line %d: unable to place value %lx into a short"),
fixP->fx_line, value);
else
bfd_putb16 ((bfd_vma) value, (unsigned char *) where);
}
}
-/* Called after the assembler has finished parsing the input file or
- after a label is defined. Because the D30V assembler sometimes
- saves short instructions to see if it can package them with the
- next instruction, there may be a short instruction that still needs
- written. */
-
-int
-d30v_cleanup (use_sequential)
- int use_sequential;
-{
- segT seg;
- subsegT subseg;
-
- if (prev_insn != -1)
- {
- seg = now_seg;
- subseg = now_subseg;
- subseg_set (prev_seg, prev_subseg);
- write_1_short (&prev_opcode, (long) prev_insn, fixups->next,
- use_sequential);
- subseg_set (seg, subseg);
- prev_insn = -1;
- if (use_sequential)
- prev_mul32_p = false;
- }
-
- return 1;
-}
-
-static void
-d30v_number_to_chars (buf, value, n)
- char *buf; /* Return 'nbytes' of chars here. */
- long long value; /* The value of the bits. */
- int n; /* Number of bytes in the output. */
-{
- while (n--)
- {
- buf[n] = value & 0xff;
- value >>= 8;
- }
-}
-
-/* This function is called at the start of every line. It checks to
- see if the first character is a '.', which indicates the start of a
- pseudo-op. If it is, then write out any unwritten instructions. */
-
-void
-d30v_start_line ()
-{
- char *c = input_line_pointer;
-
- while (ISSPACE (*c))
- c++;
-
- if (*c == '.')
- d30v_cleanup (false);
-}
-
-static void
-check_size (value, bits, file, line)
- long value;
- int bits;
- char *file;
- int line;
-{
- int tmp, max;
-
- if (value < 0)
- tmp = ~value;
- else
- tmp = value;
-
- max = (1 << (bits - 1)) - 1;
-
- if (tmp > max)
- as_bad_where (file, line, _("value too large to fit in %d bits"), bits);
-
- return;
-}
-
-/* d30v_frob_label() is called when after a label is recognized. */
-
-void
-d30v_frob_label (lab)
- symbolS *lab;
-{
- /* Emit any pending instructions. */
- d30v_cleanup (false);
-
- /* Update the label's address with the current output pointer. */
- symbol_set_frag (lab, frag_now);
- S_SET_VALUE (lab, (valueT) frag_now_fix ());
-
- /* Record this label for future adjustment after we find out what
- kind of data it references, and the required alignment therewith. */
- d30v_last_label = lab;
-}
-
-/* Hook into cons for capturing alignment changes. */
-
-void
-d30v_cons_align (size)
- int size;
-{
- int log_size;
-
- log_size = 0;
- while ((size >>= 1) != 0)
- ++log_size;
-
- if (d30v_current_align < log_size)
- d30v_align (log_size, (char *) NULL, NULL);
- else if (d30v_current_align > log_size)
- d30v_current_align = log_size;
- d30v_last_label = NULL;
-}
-
-/* Called internally to handle all alignment needs. This takes care
- of eliding calls to frag_align if'n the cached current alignment
- says we've already got it, as well as taking care of the auto-aligning
- labels wrt code. */
-
-static void
-d30v_align (n, pfill, label)
- int n;
- char *pfill;
- symbolS *label;
-{
- /* The front end is prone to changing segments out from under us
- temporarily when -g is in effect. */
- int switched_seg_p = (d30v_current_align_seg != now_seg);
-
- /* Do not assume that if 'd30v_current_align >= n' and
- '! switched_seg_p' that it is safe to avoid performing
- this alignement request. The alignment of the current frag
- can be changed under our feet, for example by a .ascii
- directive in the source code. cf testsuite/gas/d30v/reloc.s */
- d30v_cleanup (false);
-
- if (pfill == NULL)
- {
- if (n > 2
- && (bfd_get_section_flags (stdoutput, now_seg) & SEC_CODE) != 0)
- {
- static char const nop[4] = { 0x00, 0xf0, 0x00, 0x00 };
-
- /* First, make sure we're on a four-byte boundary, in case
- someone has been putting .byte values the text section. */
- if (d30v_current_align < 2 || switched_seg_p)
- frag_align (2, 0, 0);
- frag_align_pattern (n, nop, sizeof nop, 0);
- }
- else
- frag_align (n, 0, 0);
- }
- else
- frag_align (n, *pfill, 0);
-
- if (!switched_seg_p)
- d30v_current_align = n;
-
- if (label != NULL)
- {
- symbolS *sym;
- int label_seen = false;
- struct frag *old_frag;
- valueT old_value;
- valueT new_value;
-
- assert (S_GET_SEGMENT (label) == now_seg);
-
- old_frag = symbol_get_frag (label);
- old_value = S_GET_VALUE (label);
- new_value = (valueT) frag_now_fix ();
-
- /* It is possible to have more than one label at a particular
- address, especially if debugging is enabled, so we must
- take care to adjust all the labels at this address in this
- fragment. To save time we search from the end of the symbol
- list, backwards, since the symbols we are interested in are
- almost certainly the ones that were most recently added.
- Also to save time we stop searching once we have seen at least
- one matching label, and we encounter a label that is no longer
- in the target fragment. Note, this search is guaranteed to
- find at least one match when sym == label, so no special case
- code is necessary. */
- for (sym = symbol_lastP; sym != NULL; sym = symbol_previous (sym))
- {
- if (symbol_get_frag (sym) == old_frag
- && S_GET_VALUE (sym) == old_value)
- {
- label_seen = true;
- symbol_set_frag (sym, frag_now);
- S_SET_VALUE (sym, new_value);
- }
- else if (label_seen && symbol_get_frag (sym) != old_frag)
- break;
- }
- }
-
- record_alignment (now_seg, n);
-}
-
/* Handle the .align pseudo-op. This aligns to a power of two. We
hook here to latch the current alignment. */
static void
-s_d30v_align (ignore)
- int ignore;
+s_d30v_align (int ignore ATTRIBUTE_UNUSED)
{
int align;
char fill, *pfill = NULL;
clears the saved last label and resets known alignment. */
static void
-s_d30v_text (i)
- int i;
+s_d30v_text (int i)
{
s_text (i);
clears the saved last label and resets known alignment. */
static void
-s_d30v_data (i)
- int i;
+s_d30v_data (int i)
{
s_data (i);
d30v_last_label = NULL;
clears the saved last label and resets known alignment. */
static void
-s_d30v_section (ignore)
- int ignore;
+s_d30v_section (int ignore)
{
obj_elf_section (ignore);
d30v_last_label = NULL;
d30v_current_align = 0;
d30v_current_align_seg = now_seg;
}
+
+/* The target specific pseudo-ops which we support. */
+const pseudo_typeS md_pseudo_table[] =
+{
+ { "word", cons, 4 },
+ { "hword", cons, 2 },
+ { "align", s_d30v_align, 0 },
+ { "text", s_d30v_text, 0 },
+ { "data", s_d30v_data, 0 },
+ { "section", s_d30v_section, 0 },
+ { "section.s", s_d30v_section, 0 },
+ { "sect", s_d30v_section, 0 },
+ { "sect.s", s_d30v_section, 0 },
+ { NULL, NULL, 0 }
+};
+