/* tc-d30v.c -- Assembler code for the Mitsubishi D30V
-
- Copyright (C) 1997, 1998 Free Software Foundation.
+ Copyright 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
#include <stdio.h>
#include <ctype.h>
#include "as.h"
-#include "subsegs.h"
+#include "subsegs.h"
#include "opcode/d30v.h"
const char comment_chars[] = ";";
const char line_comment_chars[] = "#";
const char line_separator_chars[] = "";
-const char *md_shortopts = "OnN";
+const char *md_shortopts = "OnNcC";
const char EXP_CHARS[] = "eE";
const char FLT_CHARS[] = "dD";
+#if HAVE_LIMITS_H
+#include <limits.h>
+#endif
+
+#ifndef CHAR_BIT
+#define CHAR_BIT 8
+#endif
+
#define NOP_MULTIPLY 1
#define NOP_ALL 2
static int warn_nops = 0;
static int Optimizing = 0;
+static int warn_register_name_conflicts = 1;
#define FORCE_SHORT 1
#define FORCE_LONG 2
EXEC_REVSEQ /* reverse sequential (FM=10) */
} exec_type_enum;
-/* fixups */
+/* Fixups. */
#define MAX_INSN_FIXUPS (5)
struct d30v_fixup
{
static Fixups FixUps[2];
static Fixups *fixups;
-/* Whether current and previous instruction is a word multiply. */
+/* Whether current and previous instruction are word multiply insns. */
static int cur_mul32_p = 0;
static int prev_mul32_p = 0;
/* The flag_explicitly_parallel is true iff the instruction being assembled
has been explicitly written as a parallel short-instruction pair by the
- human programmer. It is used in parallel_ok() to distinguish between
+ human programmer. It is used in parallel_ok () to distinguish between
those dangerous parallelizations attempted by the human, which are to be
allowed, and those attempted by the assembler, which are not. It is set
- from md_assemble(). */
-static int flag_explicitly_parallel = 0;
+ from md_assemble (). */
+static int flag_explicitly_parallel = 0;
static int flag_xp_state = 0;
+/* Whether current and previous left sub-instruction disables
+ execution of right sub-instruction. */
+static int cur_left_kills_right_p = 0;
+static int prev_left_kills_right_p = 0;
+
/* The known current alignment of the current section. */
static int d30v_current_align;
static segT d30v_current_align_seg;
labels preceeding instructions. */
static symbolS *d30v_last_label;
-/* Two nops */
-#define NOP_LEFT ((long long)NOP << 32)
-#define NOP_RIGHT ((long long)NOP)
+/* Two nops. */
+#define NOP_LEFT ((long long) NOP << 32)
+#define NOP_RIGHT ((long long) NOP)
#define NOP2 (FM00 | NOP_LEFT | NOP_RIGHT)
-/* local functions */
+/* Local functions. */
static int reg_name_search PARAMS ((char *name));
static int register_name PARAMS ((expressionS *expressionP));
static int check_range PARAMS ((unsigned long num, int bits, int flags));
static int postfix PARAMS ((char *p));
static bfd_reloc_code_real_type get_reloc PARAMS ((struct d30v_operand *op, int rel_flag));
static int get_operands PARAMS ((expressionS exp[], int cmp_hack));
-static struct d30v_format *find_format PARAMS ((struct d30v_opcode *opcode,
+static struct d30v_format *find_format PARAMS ((struct d30v_opcode *opcode,
expressionS ops[],int fsize, int cmp_hack));
static long long build_insn PARAMS ((struct d30v_insn *opcode, expressionS *opers));
static void write_long PARAMS ((struct d30v_insn *opcode, long long insn, Fixups *fx));
-static void write_1_short PARAMS ((struct d30v_insn *opcode, long long insn, Fixups *fx));
-static int write_2_short PARAMS ((struct d30v_insn *opcode1, long long insn1,
+static void write_1_short PARAMS ((struct d30v_insn *opcode, long long insn,
+ Fixups *fx, int use_sequential));
+static int write_2_short PARAMS ((struct d30v_insn *opcode1, long long insn1,
struct d30v_insn *opcode2, long long insn2, exec_type_enum exec_type, Fixups *fx));
static long long do_assemble PARAMS ((char *str, struct d30v_insn *opcode,
- int shortp));
-static int parallel_ok PARAMS ((struct d30v_insn *opcode1, unsigned long insn1,
+ int shortp, int is_parallel));
+static int parallel_ok PARAMS ((struct d30v_insn *opcode1, unsigned long insn1,
struct d30v_insn *opcode2, unsigned long insn2,
exec_type_enum exec_type));
static void d30v_number_to_chars PARAMS ((char *buf, long long value, int nbytes));
static void s_d30v_data PARAMS ((int));
static void s_d30v_section PARAMS ((int));
-struct option md_longopts[] = {
+struct option md_longopts[] =
+{
{NULL, no_argument, NULL, 0}
};
-size_t md_longopts_size = sizeof(md_longopts);
+size_t md_longopts_size = sizeof (md_longopts);
/* The target specific pseudo-ops which we support. */
const pseudo_typeS md_pseudo_table[] =
/* Opcode hash table. */
static struct hash_control *d30v_hash;
-/* reg_name_search does a binary search of the pre_defined_registers
- array to see if "name" is a valid regiter name. Returns the register
- number from the array on success, or -1 on failure. */
+/* Do a binary search of the pre_defined_registers array to see if
+ NAME is a valid regiter name. Return the register number from the
+ array on success, or -1 on failure. */
static int
reg_name_search (name)
int cmp;
low = 0;
- high = reg_name_cnt() - 1;
+ high = reg_name_cnt () - 1;
do
{
high = middle - 1;
else if (cmp > 0)
low = middle + 1;
- else
+ else
+ {
+ if (symbol_find (name) != NULL)
+ {
+ if (warn_register_name_conflicts)
+ as_warn (_("Register name %s conflicts with symbol of the same name"),
+ name);
+ }
+
return pre_defined_registers[middle].value;
+ }
}
while (low <= high);
+
return -1;
}
-/* register_name() checks the string at input_line_pointer
- to see if it is a valid register name */
+/* Check the string at input_line_pointer to see if it is a valid
+ register name. */
static int
register_name (expressionP)
{
int reg_number;
char c, *p = input_line_pointer;
-
- while (*p && *p!='\n' && *p!='\r' && *p !=',' && *p!=' ' && *p!=')')
+
+ while (*p && *p != '\n' && *p != '\r' && *p != ',' && *p != ' ' && *p != ')')
p++;
c = *p;
if (c)
*p++ = 0;
- /* look to see if it's in the register table */
+ /* Look to see if it's in the register table. */
reg_number = reg_name_search (input_line_pointer);
- if (reg_number >= 0)
+ if (reg_number >= 0)
{
expressionP->X_op = O_register;
- /* temporarily store a pointer to the string here */
- expressionP->X_op_symbol = (struct symbol *)input_line_pointer;
+ /* Temporarily store a pointer to the string here. */
+ expressionP->X_op_symbol = (symbolS *) input_line_pointer;
expressionP->X_add_number = reg_number;
input_line_pointer = p;
return 1;
}
if (c)
- *(p-1) = c;
+ *(p - 1) = c;
return 0;
}
-
static int
check_range (num, bits, flags)
unsigned long num;
int flags;
{
long min, max;
- int retval=0;
- /* don't bother checking 32-bit values */
+ /* Don't bother checking 32-bit values. */
if (bits == 32)
- return 0;
+ {
+ if (sizeof (unsigned long) * CHAR_BIT == 32)
+ return 0;
+
+ /* We don't record signed or unsigned for 32-bit quantities.
+ Allow either. */
+ min = -((unsigned long) 1 << (bits - 1));
+ max = ((unsigned long) 1 << bits) - 1;
+ return (long)num < min || (long)num > max;
+ }
+
+ if (flags & OPERAND_SHIFT)
+ {
+ /* We know that all shifts are right by three bits. */
+
+ if (flags & OPERAND_SIGNED)
+ num = (unsigned long) ((long) num >= 0)
+ ? (((long) num) >> 3)
+ : ((num >> 3) | ~(~(unsigned long) 0 >> 3));
+ else
+ num >>= 3;
+ }
if (flags & OPERAND_SIGNED)
{
- max = (1 << (bits - 1))-1;
- min = - (1 << (bits - 1));
- if (((long)num > max) || ((long)num < min))
- retval = 1;
+ max = ((unsigned long) 1 << (bits - 1)) - 1;
+ min = - ((unsigned long) 1 << (bits - 1));
+ return (long)num > max || (long)num < min;
}
else
{
- max = (1 << bits) - 1;
+ max = ((unsigned long) 1 << bits) - 1;
min = 0;
- if ((num > max) || (num < min))
- retval = 1;
+ return num > max || num < min;
}
- return retval;
}
-
void
md_show_usage (stream)
- FILE *stream;
+ FILE *stream;
{
- fprintf(stream, _("\nD30V options:\n\
+ fprintf (stream, _("\nD30V options:\n\
-O Make adjacent short instructions parallel if possible.\n\
-n Warn about all NOPs inserted by the assembler.\n\
--N Warn about NOPs inserted after word multiplies.\n"));
-}
+-N Warn about NOPs inserted after word multiplies.\n\
+-c Warn about symbols whoes names match register names.\n\
+-C Opposite of -C. -c is the default.\n"));
+}
int
md_parse_option (c, arg)
{
switch (c)
{
- /* Optimize. Will attempt to parallelize operations */
+ /* Optimize. Will attempt to parallelize operations. */
case 'O':
Optimizing = 1;
break;
warn_nops = NOP_MULTIPLY;
break;
+ case 'c':
+ warn_register_name_conflicts = 1;
+ break;
+
+ case 'C':
+ warn_register_name_conflicts = 0;
+ break;
+
default:
return 0;
}
symbolS *
md_undefined_symbol (name)
- char *name;
+ char *name;
{
return 0;
}
-/* Turn a string in input_line_pointer into a floating point constant of type
- type, and store the appropriate bytes in *litP. The number of LITTLENUMS
- emitted is stored in *sizeP . An error message is returned, or NULL on OK.
- */
+/* Turn a string in input_line_pointer into a floating point constant
+ of type TYPE, and store the appropriate bytes in *LITP. The number
+ of LITTLENUMS emitted is stored in *SIZEP. An error message is
+ returned, or NULL on OK. */
+
char *
md_atof (type, litP, sizeP)
int type;
LITTLENUM_TYPE words[4];
char *t;
int i;
-
+
switch (type)
{
case 'f':
t = atof_ieee (input_line_pointer, type, words);
if (t)
input_line_pointer = t;
-
+
*sizeP = prec * 2;
-
+
for (i = 0; i < prec; i++)
{
md_number_to_chars (litP, (valueT) words[i], 2);
- litP += 2;
+ litP += 2;
}
return NULL;
}
void
md_convert_frag (abfd, sec, fragP)
- bfd *abfd;
- asection *sec;
- fragS *fragP;
+ bfd *abfd;
+ asection *sec;
+ fragS *fragP;
{
abort ();
}
return ((addr + (1 << align) - 1) & (-1 << align));
}
-
void
md_begin ()
{
struct d30v_opcode *opcode;
- d30v_hash = hash_new();
+ d30v_hash = hash_new ();
- /* Insert opcode names into a hash table. */
- for (opcode = (struct d30v_opcode *)d30v_opcode_table; opcode->name; opcode++)
+ /* Insert opcode names into a hash table. */
+ for (opcode = (struct d30v_opcode *) d30v_opcode_table; opcode->name; opcode++)
hash_insert (d30v_hash, opcode->name, (char *) opcode);
fixups = &FixUps[0];
d30v_current_align_seg = now_seg;
}
+/* Remove the postincrement or postdecrement operator ( '+' or '-' )
+ from an expression. */
-/* this function removes the postincrement or postdecrement
- operator ( '+' or '-' ) from an expression */
-
-static int postfix (p)
+static int
+postfix (p)
char *p;
{
- while (*p != '-' && *p != '+')
+ while (*p != '-' && *p != '+')
{
- if (*p==0 || *p=='\n' || *p=='\r' || *p==' ' || *p==',')
+ if (*p == 0 || *p == '\n' || *p == '\r' || *p == ' ' || *p == ',')
break;
p++;
}
- if (*p == '-')
+ if (*p == '-')
{
*p = ' ';
- return (-1);
+ return -1;
}
- if (*p == '+')
+
+ if (*p == '+')
{
*p = ' ';
- return (1);
+ return 1;
}
- return (0);
+ return 0;
}
-
-static bfd_reloc_code_real_type
-get_reloc (op, rel_flag)
+static bfd_reloc_code_real_type
+get_reloc (op, rel_flag)
struct d30v_operand *op;
int rel_flag;
{
break;
case 12:
if (!(op->flags & OPERAND_SHIFT))
- as_warn(_("unexpected 12-bit reloc type"));
+ as_warn (_("unexpected 12-bit reloc type"));
if (rel_flag == RELOC_PCREL)
return BFD_RELOC_D30V_15_PCREL;
else
return BFD_RELOC_D30V_15;
case 18:
if (!(op->flags & OPERAND_SHIFT))
- as_warn(_("unexpected 18-bit reloc type"));
+ as_warn (_("unexpected 18-bit reloc type"));
if (rel_flag == RELOC_PCREL)
return BFD_RELOC_D30V_21_PCREL;
else
}
}
-/* get_operands parses a string of operands and returns
- an array of expressions */
+/* Parse a string of operands and return an array of expressions. */
static int
-get_operands (exp, cmp_hack)
+get_operands (exp, cmp_hack)
expressionS exp[];
int cmp_hack;
{
exp[numops++].X_add_number = cmp_hack - 1;
}
- while (*p)
+ while (*p)
{
- while (*p == ' ' || *p == '\t' || *p == ',')
+ while (*p == ' ' || *p == '\t' || *p == ',')
p++;
- if (*p==0 || *p=='\n' || *p=='\r')
+
+ if (*p == 0 || *p == '\n' || *p == '\r')
break;
-
- if (*p == '@')
+
+ if (*p == '@')
{
p++;
exp[numops].X_op = O_absent;
- if (*p == '(')
+ if (*p == '(')
{
p++;
exp[numops].X_add_number = OPERAND_ATPAR;
post = postfix (p);
}
- else if (*p == '-')
+ else if (*p == '-')
{
p++;
exp[numops].X_add_number = OPERAND_ATMINUS;
continue;
}
- if (*p == ')')
+ if (*p == ')')
{
- /* just skip the trailing paren */
+ /* Just skip the trailing paren. */
p++;
continue;
}
input_line_pointer = p;
- /* check to see if it might be a register name */
+ /* Check to see if it might be a register name. */
if (!register_name (&exp[numops]))
{
- /* parse as an expression */
+ /* Parse as an expression. */
expression (&exp[numops]);
}
- if (exp[numops].X_op == O_illegal)
+ if (exp[numops].X_op == O_illegal)
as_bad (_("illegal operand"));
- else if (exp[numops].X_op == O_absent)
+ else if (exp[numops].X_op == O_absent)
as_bad (_("missing operand"));
numops++;
p = input_line_pointer;
- switch (post)
+ switch (post)
{
- case -1: /* postdecrement mode */
+ case -1:
+ /* Postdecrement mode. */
exp[numops].X_op = O_absent;
exp[numops++].X_add_number = OPERAND_MINUS;
break;
- case 1: /* postincrement mode */
+ case 1:
+ /* Postincrement mode. */
exp[numops].X_op = O_absent;
exp[numops++].X_add_number = OPERAND_PLUS;
break;
}
exp[numops].X_op = 0;
- return (numops);
+
+ return numops;
}
-/* build_insn generates the instruction. It does everything */
-/* but write the FM bits. */
+/* Generate the instruction.
+ It does everything but write the FM bits. */
static long long
-build_insn (opcode, opers)
+build_insn (opcode, opers)
struct d30v_insn *opcode;
expressionS *opers;
{
int i, length, bits, shift, flags;
- unsigned int number, id=0;
+ unsigned long number, id = 0;
long long insn;
struct d30v_opcode *op = opcode->op;
struct d30v_format *form = opcode->form;
- insn = opcode->ecc << 28 | op->op1 << 25 | op->op2 << 20 | form->modifier << 18;
+ insn =
+ opcode->ecc << 28 | op->op1 << 25 | op->op2 << 20 | form->modifier << 18;
- for (i=0; form->operands[i]; i++)
- {
+ for (i = 0; form->operands[i]; i++)
+ {
flags = d30v_operand_table[form->operands[i]].flags;
- /* must be a register or number */
- if (!(flags & OPERAND_REG) && !(flags & OPERAND_NUM) &&
- !(flags & OPERAND_NAME) && !(flags & OPERAND_SPECIAL))
+ /* Must be a register or number. */
+ if (!(flags & OPERAND_REG) && !(flags & OPERAND_NUM)
+ && !(flags & OPERAND_NAME) && !(flags & OPERAND_SPECIAL))
continue;
bits = d30v_operand_table[form->operands[i]].bits;
number = 0;
if (flags & OPERAND_REG)
{
- /* check for mvfsys or mvtsys control registers */
+ /* Check for mvfsys or mvtsys control registers. */
if (flags & OPERAND_CONTROL && (number & 0x7f) > MAX_CONTROL_REG)
{
- /* PSWL or PSWH */
+ /* PSWL or PSWH. */
id = (number & 0x7f) - MAX_CONTROL_REG;
number = 0;
}
else if (number & OPERAND_FLAG)
{
- id = 3; /* number is a flag register */
+ /* NUMBER is a flag register. */
+ id = 3;
}
number &= 0x7F;
}
number = id;
}
- if (opers[i].X_op != O_register && opers[i].X_op != O_constant && !(flags & OPERAND_NAME))
+ if (opers[i].X_op != O_register && opers[i].X_op != O_constant
+ && !(flags & OPERAND_NAME))
{
- /* now create a fixup */
-
+ /* Now create a fixup. */
if (fixups->fc >= MAX_INSN_FIXUPS)
as_fatal (_("too many fixups"));
- fixups->fix[fixups->fc].reloc =
- get_reloc((struct d30v_operand *)&d30v_operand_table[form->operands[i]], op->reloc_flag);
+ fixups->fix[fixups->fc].reloc =
+ get_reloc ((struct d30v_operand *) &d30v_operand_table[form->operands[i]], op->reloc_flag);
fixups->fix[fixups->fc].size = 4;
fixups->fix[fixups->fc].exp = opers[i];
fixups->fix[fixups->fc].operand = form->operands[i];
(fixups->fc)++;
}
- /* truncate to the proper number of bits */
+ /* Truncate to the proper number of bits. */
if ((opers[i].X_op == O_constant) && check_range (number, bits, flags))
- as_bad(_("operand out of range: %d"),number);
+ as_bad (_("operand out of range: %d"), number);
if (bits < 31)
number &= 0x7FFFFFFF >> (31 - bits);
if (flags & OPERAND_SHIFT)
number >>= 3;
if (bits == 32)
{
- /* it's a LONG instruction */
- insn |= (number >> 26); /* top 6 bits */
+ /* It's a LONG instruction. */
+ insn |= ((number & 0xffffffff) >> 26); /* top 6 bits */
insn <<= 32; /* shift the first word over */
- insn |= ((number & 0x03FC0000) << 2); /* next 8 bits */
- insn |= number & 0x0003FFFF; /* bottom 18 bits */
+ insn |= ((number & 0x03FC0000) << 2); /* next 8 bits */
+ insn |= number & 0x0003FFFF; /* bottom 18 bits */
}
else
insn |= number << shift;
}
+
return insn;
}
+/* Write out a long form instruction. */
-/* write out a long form instruction */
static void
-write_long (opcode, insn, fx)
+write_long (opcode, insn, fx)
struct d30v_insn *opcode;
long long insn;
Fixups *fx;
{
int i, where;
- char *f = frag_more(8);
+ char *f = frag_more (8);
insn |= FM11;
d30v_number_to_chars (f, insn, 8);
- for (i=0; i < fx->fc; i++)
+ for (i = 0; i < fx->fc; i++)
{
if (fx->fix[i].reloc)
- {
- where = f - frag_now->fr_literal;
+ {
+ where = f - frag_now->fr_literal;
fix_new_exp (frag_now,
where,
fx->fix[i].size,
fx->fix[i].reloc);
}
}
+
fx->fc = 0;
}
+/* Write out a short form instruction by itself. */
-/* write out a short form instruction by itself */
static void
-write_1_short (opcode, insn, fx)
+write_1_short (opcode, insn, fx, use_sequential)
struct d30v_insn *opcode;
long long insn;
Fixups *fx;
+ int use_sequential;
{
- char *f = frag_more(8);
+ char *f = frag_more (8);
int i, where;
if (warn_nops == NOP_ALL)
- as_warn (_("NOP inserted"));
+ as_warn (_("%s NOP inserted"), use_sequential ?
+ _("sequential") : _("parallel"));
+
+ /* The other container needs to be NOP. */
+ if (use_sequential)
+ {
+ /* Use a sequential NOP rather than a parallel one,
+ as the current instruction is a FLAG_MUL32 type one
+ and the next instruction is a load. */
- /* the other container needs to be NOP */
- /* according to 4.3.1: for FM=00, sub-instructions performed only
- by IU cannot be encoded in L-container. */
- if (opcode->op->unit == IU)
- insn |= FM00 | NOP_LEFT; /* right container */
+ /* According to 4.3.1: for FM=01, sub-instructions performed
+ only by IU cannot be encoded in L-container. */
+
+ if (opcode->op->unit == IU)
+ /* Right then left. */
+ insn |= FM10 | NOP_LEFT;
+ else
+ /* Left then right. */
+ insn = FM01 | (insn << 32) | NOP_RIGHT;
+ }
else
- insn = FM00 | (insn << 32) | NOP_RIGHT; /* left container */
+ {
+ /* According to 4.3.1: for FM=00, sub-instructions performed
+ only by IU cannot be encoded in L-container. */
+
+ if (opcode->op->unit == IU)
+ /* Right container. */
+ insn |= FM00 | NOP_LEFT;
+ else
+ /* Left container. */
+ insn = FM00 | (insn << 32) | NOP_RIGHT;
+ }
d30v_number_to_chars (f, insn, 8);
- for (i=0; i < fx->fc; i++)
+ for (i = 0; i < fx->fc; i++)
{
if (fx->fix[i].reloc)
- {
- where = f - frag_now->fr_literal;
+ {
+ where = f - frag_now->fr_literal;
fix_new_exp (frag_now,
- where,
+ where,
fx->fix[i].size,
&(fx->fix[i].exp),
fx->fix[i].pcrel,
fx->fix[i].reloc);
}
}
+
fx->fc = 0;
}
-/* write out a short form instruction if possible */
-/* return number of instructions not written out */
+/* Write out a short form instruction if possible.
+ Return number of instructions not written out. */
+
static int
-write_2_short (opcode1, insn1, opcode2, insn2, exec_type, fx)
+write_2_short (opcode1, insn1, opcode2, insn2, exec_type, fx)
struct d30v_insn *opcode1, *opcode2;
long long insn1, insn2;
exec_type_enum exec_type;
{
long long insn = NOP2;
char *f;
- int i,j, where;
+ int i, j, where;
- if(exec_type != EXEC_PARALLEL &&
- ((opcode1->op->flags_used & (FLAG_JSR | FLAG_DELAY)) == FLAG_JSR))
+ if (exec_type == EXEC_SEQ
+ && (opcode1->op->flags_used & (FLAG_JMP | FLAG_JSR))
+ && ((opcode1->op->flags_used & FLAG_DELAY) == 0)
+ && ((opcode1->ecc == ECC_AL) || ! Optimizing))
{
- /* subroutines must be called from 32-bit boundaries */
- /* so the return address will be correct */
- write_1_short (opcode1, insn1, fx->next);
- return (1);
+ /* Unconditional, non-delayed branches kill instructions in
+ the right bin. Conditional branches don't always but if
+ we are not optimizing, then we have been asked to produce
+ an error about such constructs. For the purposes of this
+ test, subroutine calls are considered to be branches. */
+ write_1_short (opcode1, insn1, fx->next, false);
+ return 1;
}
- switch (exec_type)
+ /* Note: we do not have to worry about subroutine calls occuring
+ in the right hand container. The return address is always
+ aligned to the next 64 bit boundary, be that 64 or 32 bit away. */
+ switch (exec_type)
{
- case EXEC_UNKNOWN: /* order not specified */
- if (Optimizing && parallel_ok (opcode1, insn1, opcode2, insn2, exec_type))
+ case EXEC_UNKNOWN: /* Order not specified. */
+ if (Optimizing
+ && parallel_ok (opcode1, insn1, opcode2, insn2, exec_type)
+ && ! ( (opcode1->op->unit == EITHER_BUT_PREFER_MU
+ || opcode1->op->unit == MU)
+ &&
+ ( opcode2->op->unit == EITHER_BUT_PREFER_MU
+ || opcode2->op->unit == MU)))
{
- /* parallel */
+ /* Parallel. */
exec_type = EXEC_PARALLEL;
- if (opcode1->op->unit == IU)
- insn = FM00 | (insn2 << 32) | insn1;
- else if (opcode2->op->unit == MU)
+
+ if (opcode1->op->unit == IU
+ || opcode2->op->unit == MU
+ || opcode2->op->unit == EITHER_BUT_PREFER_MU)
insn = FM00 | (insn2 << 32) | insn1;
else
{
- insn = FM00 | (insn1 << 32) | insn2;
+ insn = FM00 | (insn1 << 32) | insn2;
fx = fx->next;
}
}
+ else if ((opcode1->op->flags_used & (FLAG_JMP | FLAG_JSR)
+ && ((opcode1->op->flags_used & FLAG_DELAY) == 0))
+ || opcode1->op->flags_used & FLAG_RP)
+ {
+ /* We must emit (non-delayed) branch type instructions
+ on their own with nothing in the right container. */
+ /* We must treat repeat instructions likewise, since the
+ following instruction has to be separate from the repeat
+ in order to be repeated. */
+ write_1_short (opcode1, insn1, fx->next, false);
+ return 1;
+ }
+ else if (prev_left_kills_right_p)
+ {
+ /* The left instruction kils the right slot, so we
+ must leave it empty. */
+ write_1_short (opcode1, insn1, fx->next, false);
+ return 1;
+ }
else if (opcode1->op->unit == IU)
{
- /* reverse sequential */
+ if (opcode2->op->unit == EITHER_BUT_PREFER_MU)
+ {
+ /* Case 103810 is a request from Mitsubishi that opcodes
+ with EITHER_BUT_PREFER_MU should not be executed in
+ reverse sequential order. */
+ write_1_short (opcode1, insn1, fx->next, false);
+ return 1;
+ }
+
+ /* Reverse sequential. */
insn = FM10 | (insn2 << 32) | insn1;
exec_type = EXEC_REVSEQ;
}
else
{
- /* sequential */
+ /* Sequential. */
insn = FM01 | (insn1 << 32) | insn2;
fx = fx->next;
exec_type = EXEC_SEQ;
}
break;
- case EXEC_PARALLEL: /* parallel */
+ case EXEC_PARALLEL: /* Parallel. */
flag_explicitly_parallel = flag_xp_state;
if (! parallel_ok (opcode1, insn1, opcode2, insn2, exec_type))
- as_fatal (_("Instructions may not be executed in parallel"));
+ as_bad (_("Instructions may not be executed in parallel"));
else if (opcode1->op->unit == IU)
{
if (opcode2->op->unit == IU)
- as_fatal (_("Two IU instructions may not be executed in parallel"));
+ as_bad (_("Two IU instructions may not be executed in parallel"));
as_warn (_("Swapping instruction order"));
- insn = FM00 | (insn2 << 32) | insn1;
+ insn = FM00 | (insn2 << 32) | insn1;
}
else if (opcode2->op->unit == MU)
{
if (opcode1->op->unit == MU)
- as_fatal (_("Two MU instructions may not be executed in parallel"));
+ as_bad (_("Two MU instructions may not be executed in parallel"));
+ else if (opcode1->op->unit == EITHER_BUT_PREFER_MU)
+ as_warn (_("Executing %s in IU may not work"), opcode1->op->name);
as_warn (_("Swapping instruction order"));
insn = FM00 | (insn2 << 32) | insn1;
}
else
{
- insn = FM00 | (insn1 << 32) | insn2;
+ if (opcode2->op->unit == EITHER_BUT_PREFER_MU)
+ as_warn (_("Executing %s in IU may not work in parallel execution"),
+ opcode2->op->name);
+
+ insn = FM00 | (insn1 << 32) | insn2;
fx = fx->next;
}
flag_explicitly_parallel = 0;
break;
- case EXEC_SEQ: /* sequential */
+ case EXEC_SEQ: /* Sequential. */
if (opcode1->op->unit == IU)
- as_fatal (_("IU instruction may not be in the left container"));
- insn = FM01 | (insn1 << 32) | insn2;
+ as_bad (_("IU instruction may not be in the left container"));
+ if (prev_left_kills_right_p)
+ as_bad (_("special left instruction `%s' kills instruction "
+ "`%s' in right container"),
+ opcode1->op->name, opcode2->op->name);
+ insn = FM01 | (insn1 << 32) | insn2;
fx = fx->next;
break;
- case EXEC_REVSEQ: /* reverse sequential */
+ case EXEC_REVSEQ: /* Reverse sequential. */
if (opcode2->op->unit == MU)
- as_fatal (_("MU instruction may not be in the right container"));
- insn = FM10 | (insn1 << 32) | insn2;
+ as_bad (_("MU instruction may not be in the right container"));
+ if (opcode1->op->unit == EITHER_BUT_PREFER_MU)
+ as_warn (_("Executing %s in reverse serial with %s may not work"),
+ opcode1->op->name, opcode2->op->name);
+ else if (opcode2->op->unit == EITHER_BUT_PREFER_MU)
+ as_warn (_("Executing %s in IU in reverse serial may not work"),
+ opcode2->op->name);
+ insn = FM10 | (insn1 << 32) | insn2;
fx = fx->next;
break;
default:
- as_fatal(_("unknown execution type passed to write_2_short()"));
+ as_fatal (_("unknown execution type passed to write_2_short()"));
}
- /* printf("writing out %llx\n",insn); */
- f = frag_more(8);
+#if 0
+ printf ("writing out %llx\n", insn);
+#endif
+ f = frag_more (8);
d30v_number_to_chars (f, insn, 8);
/* If the previous instruction was a 32-bit multiply but it is put into a
if (prev_mul32_p && exec_type == EXEC_PARALLEL)
cur_mul32_p = 1;
- for (j=0; j<2; j++)
+ for (j = 0; j < 2; j++)
{
- for (i=0; i < fx->fc; i++)
+ for (i = 0; i < fx->fc; i++)
{
if (fx->fix[i].reloc)
{
- where = (f - frag_now->fr_literal) + 4*j;
+ where = (f - frag_now->fr_literal) + 4 * j;
fix_new_exp (frag_now,
- where,
+ where,
fx->fix[i].size,
&(fx->fix[i].exp),
fx->fix[i].pcrel,
fx->fix[i].reloc);
}
}
+
fx->fc = 0;
fx = fx->next;
}
- return (0);
+
+ return 0;
}
+/* Check 2 instructions and determine if they can be safely
+ executed in parallel. Return 1 if they can be. */
-/* Check 2 instructions and determine if they can be safely */
-/* executed in parallel. Returns 1 if they can be. */
static int
parallel_ok (op1, insn1, op2, insn2, exec_type)
struct d30v_insn *op1, *op2;
struct d30v_format *f;
struct d30v_opcode *op;
- /* section 4.3: both instructions must not be IU or MU only */
+ /* Section 4.3: Both instructions must not be IU or MU only. */
if ((op1->op->unit == IU && op2->op->unit == IU)
|| (op1->op->unit == MU && op2->op->unit == MU))
return 0;
- /* first instruction must not be a jump to safely optimize, unless this
+ /* First instruction must not be a jump to safely optimize, unless this
is an explicit parallel operation. */
if (exec_type != EXEC_PARALLEL
&& (op1->op->flags_used & (FLAG_JMP | FLAG_JSR)))
|| (op1->ecc == ECC_FX && op2->ecc == ECC_TX)
|| (op1->ecc == ECC_XT && op2->ecc == ECC_XF)
|| (op1->ecc == ECC_XF && op2->ecc == ECC_XT))
- return 1;
+ return 1;
/* [0] r0-r31
[1] r32-r63
- [2] a0, a1, flag registers */
-
+ [2] a0, a1, flag registers. */
for (j = 0; j < 2; j++)
{
if (j == 0)
ecc = op2->ecc;
ins = insn2;
}
+
flag_reg[j] = 0;
mod_reg[j][0] = mod_reg[j][1] = 0;
- mod_reg[j][2] = (op->flags_set & FLAG_ALL);
used_reg[j][0] = used_reg[j][1] = 0;
- used_reg[j][2] = (op->flags_used & FLAG_ALL);
- /* BSR/JSR always sets R62 */
+ if (flag_explicitly_parallel)
+ {
+ /* For human specified parallel instructions we have been asked
+ to ignore the possibility that both instructions could modify
+ bits in the PSW, so we initialise the mod & used arrays to 0.
+ We have been asked, however, to refuse to allow parallel
+ instructions which explicitly set the same flag register,
+ eg "cmpne f0,r1,0x10 || cmpeq f0, r5, 0x2", so further on we test
+ for the use of a flag register and set a bit in the mod or used
+ array appropriately. */
+ mod_reg[j][2] = 0;
+ used_reg[j][2] = 0;
+ }
+ else
+ {
+ mod_reg[j][2] = (op->flags_set & FLAG_ALL);
+ used_reg[j][2] = (op->flags_used & FLAG_ALL);
+ }
+
+ /* BSR/JSR always sets R62. */
if (op->flags_used & FLAG_JSR)
- mod_reg[j][1] = (1L << (62-32));
+ mod_reg[j][1] = (1L << (62 - 32));
- /* conditional execution affects the flags_used */
+ /* Conditional execution affects the flags_used. */
switch (ecc)
{
case ECC_TX:
if ((flags & OPERAND_PLUS) || (flags & OPERAND_MINUS))
{
- /* this is a post-increment or post-decrement */
- /* the previous register needs to be marked as modified */
-
- shift = 12 - d30v_operand_table[f->operands[i-1]].position;
+ /* This is a post-increment or post-decrement.
+ The previous register needs to be marked as modified. */
+ shift = 12 - d30v_operand_table[f->operands[i - 1]].position;
regno = (ins >> shift) & 0x3f;
if (regno >= 32)
mod_reg[j][1] |= 1L << (regno - 32);
else if (flags & OPERAND_REG)
{
regno = (ins >> shift) & mask;
- /* the memory write functions don't have a destination register */
+ /* The memory write functions don't have a destination
+ register. */
if ((flags & OPERAND_DEST) && !(op->flags_set & FLAG_MEM))
{
- /* MODIFIED registers and flags */
+ /* MODIFIED registers and flags. */
if (flags & OPERAND_ACC)
{
if (regno == 0)
{
int r, z;
- /* need to check if there are two destination */
- /* registers, for example ld2w */
+ /* Need to check if there are two destination
+ registers, for example ld2w. */
if (flags & OPERAND_2REG)
z = 1;
else
z = 0;
for (r = regno; r <= regno + z; r++)
- {
+ {
if (r >= 32)
mod_reg[j][1] |= 1L << (r - 32);
else
}
else
{
- /* USED, but not modified registers and flags */
+ /* USED, but not modified registers and flags. */
if (flags & OPERAND_ACC)
{
if (regno == 0)
{
int r, z;
- /* need to check if there are two source */
- /* registers, for example st2w */
+ /* Need to check if there are two source
+ registers, for example st2w. */
if (flags & OPERAND_2REG)
z = 1;
else
z = 0;
for (r = regno; r <= regno + z; r++)
- {
+ {
if (r >= 32)
used_reg[j][1] |= 1L << (r - 32);
else
flags_used1 = op1->op->flags_used;
flags_used2 = op2->op->flags_used;
- /* ST2W/ST4HB combined with ADDppp/SUBppp is illegal. */
- if (((flags_set1 & (FLAG_MEM | FLAG_2WORD)) == (FLAG_MEM | FLAG_2WORD)
+ /* Check for illegal combinations with ADDppp/SUBppp. */
+ if (((flags_set1 & FLAG_NOT_WITH_ADDSUBppp) != 0
&& (flags_used2 & FLAG_ADDSUBppp) != 0)
- || ((flags_set2 & (FLAG_MEM | FLAG_2WORD)) == (FLAG_MEM | FLAG_2WORD)
+ || ((flags_set2 & FLAG_NOT_WITH_ADDSUBppp) != 0
&& (flags_used1 & FLAG_ADDSUBppp) != 0))
return 0;
the right container, and it writes its results last.
However, don't paralellize add followed by addc or sub followed by
subb. */
-
if (mod_reg[0][2] == FLAG_CVVA && mod_reg[1][2] == FLAG_CVVA
&& (used_reg[0][2] & ~flag_reg[0]) == 0
&& (used_reg[1][2] & ~flag_reg[1]) == 0
mod_reg[0][2] = mod_reg[1][2] = 0;
}
- for(j = 0; j < 3; j++)
+ for (j = 0; j < 3; j++)
{
/* If the second instruction depends on the first, we obviously
cannot parallelize. Note, the mod flag implies use, so
check that as well. */
- /* If flag_explicitly_parallel is set, then the case of the
+ /* If flag_explicitly_parallel is set, then the case of the
second instruction using a register the first instruction
modifies is assumed to be okay; we trust the human. We
don't trust the human if both instructions modify the same
register but we do trust the human if they modify the same
- flags. */
+ flags. */
+ /* We have now been requested not to trust the human if the
+ instructions modify the same flag registers either. */
if (flag_explicitly_parallel)
{
- if ((j < 2) && (mod_reg[0][j] & mod_reg[1][j]) != 0)
+ if ((mod_reg[0][j] & mod_reg[1][j]) != 0)
return 0;
}
else
return 1;
}
-
-
-/* This is the main entry point for the machine-dependent assembler. str points to a
- machine-dependent instruction. This function is supposed to emit the frags/bytes
- it assembles to. For the D30V, it mostly handles the special VLIW parsing and packing
- and leaves the difficult stuff to do_assemble(). */
+/* This is the main entry point for the machine-dependent assembler.
+ STR points to a machine-dependent instruction. This function is
+ supposed to emit the frags/bytes it assembles to. For the D30V, it
+ mostly handles the special VLIW parsing and packing and leaves the
+ difficult stuff to do_assemble (). */
static long long prev_insn = -1;
static struct d30v_insn prev_opcode;
{
struct d30v_insn opcode;
long long insn;
- exec_type_enum extype = EXEC_UNKNOWN; /* execution type; parallel, etc */
- static exec_type_enum etype = EXEC_UNKNOWN; /* saved extype. used for multiline instructions */
+ /* Execution type; parallel, etc. */
+ exec_type_enum extype = EXEC_UNKNOWN;
+ /* Saved extype. Used for multiline instructions. */
+ static exec_type_enum etype = EXEC_UNKNOWN;
char *str2;
if ((prev_insn != -1) && prev_seg
- && ((prev_seg != now_seg) || (prev_subseg != now_subseg)))
- d30v_cleanup();
+ && ((prev_seg != now_seg) || (prev_subseg != now_subseg)))
+ d30v_cleanup (false);
if (d30v_current_align < 3)
d30v_align (3, NULL, d30v_last_label);
flag_xp_state = 0;
if (etype == EXEC_UNKNOWN)
{
- /* look for the special multiple instruction separators */
+ /* Look for the special multiple instruction separators. */
str2 = strstr (str, "||");
- if (str2)
+ if (str2)
{
extype = EXEC_PARALLEL;
flag_xp_state = 1;
else
{
str2 = strstr (str, "->");
- if (str2)
+ if (str2)
extype = EXEC_SEQ;
else
{
str2 = strstr (str, "<-");
- if (str2)
+ if (str2)
extype = EXEC_REVSEQ;
}
}
- /* str2 points to the separator, if one */
- if (str2)
+
+ /* STR2 points to the separator, if one. */
+ if (str2)
{
*str2 = 0;
-
- /* if two instructions are present and we already have one saved
- then first write it out */
- d30v_cleanup();
-
- /* assemble first instruction and save it */
- prev_insn = do_assemble (str, &prev_opcode, 1);
+
+ /* If two instructions are present and we already have one saved,
+ then first write it out. */
+ d30v_cleanup (false);
+
+ /* Assemble first instruction and save it. */
+ prev_insn = do_assemble (str, &prev_opcode, 1, 0);
if (prev_insn == -1)
- as_fatal (_("Cannot assemble instruction"));
- if (prev_opcode.form->form >= LONG)
- as_fatal (_("First opcode is long. Unable to mix instructions as specified."));
+ as_bad (_("Cannot assemble instruction"));
+ if (prev_opcode.form != NULL && prev_opcode.form->form >= LONG)
+ as_bad (_("First opcode is long. Unable to mix instructions as specified."));
fixups = fixups->next;
str = str2 + 2;
prev_seg = now_seg;
}
insn = do_assemble (str, &opcode,
- (extype != EXEC_UNKNOWN || etype != EXEC_UNKNOWN));
+ (extype != EXEC_UNKNOWN || etype != EXEC_UNKNOWN),
+ extype == EXEC_PARALLEL);
if (insn == -1)
{
if (extype != EXEC_UNKNOWN)
- {
- etype = extype;
- return;
- }
- as_fatal (_("Cannot assemble instruction"));
+ etype = extype;
+ as_bad (_("Cannot assemble instruction"));
+ return;
}
if (etype != EXEC_UNKNOWN)
/* Word multiply instructions must not be followed by either a load or a
16-bit multiply instruction in the next cycle. */
- if (prev_mul32_p && (opcode.op->flags_used & (FLAG_MEM | FLAG_MUL16)))
+ if ( (extype != EXEC_REVSEQ)
+ && prev_mul32_p
+ && (opcode.op->flags_used & (FLAG_MEM | FLAG_MUL16)))
{
/* However, load and multiply should able to be combined in a parallel
operation, so check for that first. */
-
if (prev_insn != -1
&& (opcode.op->flags_used & FLAG_MEM)
&& opcode.form->form < LONG
&& (extype == EXEC_PARALLEL || (Optimizing && extype == EXEC_UNKNOWN))
- && parallel_ok (&prev_opcode, (long)prev_insn,
- &opcode, (long)insn, extype)
- && write_2_short (&prev_opcode, (long)prev_insn,
- &opcode, (long)insn, extype, fixups) == 0)
+ && parallel_ok (&prev_opcode, (long) prev_insn,
+ &opcode, (long) insn, extype)
+ && write_2_short (&prev_opcode, (long) prev_insn,
+ &opcode, (long) insn, extype, fixups) == 0)
{
- /* no instructions saved */
+ /* No instructions saved. */
prev_insn = -1;
return;
}
-
- /* Can't parallelize, flush current instruction and emit a word of NOPS */
else
{
- char *f;
- d30v_cleanup();
+ /* Can't parallelize, flush previous instruction and emit a
+ word of NOPS, unless the previous instruction is a NOP,
+ in which case just flush it, as this will generate a word
+ of NOPs for us. */
- f = frag_more(8);
- d30v_number_to_chars (f, NOP2, 8);
- if (warn_nops == NOP_ALL || warn_nops == NOP_MULTIPLY)
+ if (prev_insn != -1 && (strcmp (prev_opcode.op->name, "nop") == 0))
+ d30v_cleanup (false);
+ else
{
- if (opcode.op->flags_used & FLAG_MEM)
- as_warn (_("word of NOPs added between word multiply and load"));
+ char *f;
+
+ if (prev_insn != -1)
+ d30v_cleanup (true);
else
- as_warn (_("word of NOPs added between word multiply and 16-bit multiply"));
+ {
+ f = frag_more (8);
+ d30v_number_to_chars (f, NOP2, 8);
+
+ if (warn_nops == NOP_ALL || warn_nops == NOP_MULTIPLY)
+ {
+ if (opcode.op->flags_used & FLAG_MEM)
+ as_warn (_("word of NOPs added between word multiply and load"));
+ else
+ as_warn (_("word of NOPs added between word multiply and 16-bit multiply"));
+ }
+ }
}
+
+ extype = EXEC_UNKNOWN;
}
}
+ else if ( (extype == EXEC_REVSEQ)
+ && cur_mul32_p
+ && (prev_opcode.op->flags_used & (FLAG_MEM | FLAG_MUL16)))
+ {
+ /* Can't parallelize, flush current instruction and add a
+ sequential NOP. */
+ write_1_short (&opcode, (long) insn, fixups->next->next, true);
+
+ /* Make the previous instruction the current one. */
+ extype = EXEC_UNKNOWN;
+ insn = prev_insn;
+ now_seg = prev_seg;
+ now_subseg = prev_subseg;
+ prev_insn = -1;
+ cur_mul32_p = prev_mul32_p;
+ prev_mul32_p = 0;
+ memcpy (&opcode, &prev_opcode, sizeof (prev_opcode));
+ }
- /* if this is a long instruction, write it and any previous short instruction */
- if (opcode.form->form >= LONG)
+ /* If this is a long instruction, write it and any previous short
+ instruction. */
+ if (opcode.form->form >= LONG)
{
- if (extype)
- as_fatal(_("Unable to mix instructions as specified"));
- d30v_cleanup();
+ if (extype != EXEC_UNKNOWN)
+ as_bad (_("Instruction uses long version, so it cannot be mixed as specified"));
+ d30v_cleanup (false);
write_long (&opcode, insn, fixups);
prev_insn = -1;
- return;
}
-
- if ((prev_insn != -1) &&
- (write_2_short (&prev_opcode, (long)prev_insn, &opcode, (long)insn, extype, fixups) == 0))
+ else if ((prev_insn != -1)
+ && (write_2_short
+ (&prev_opcode, (long) prev_insn, &opcode,
+ (long) insn, extype, fixups) == 0))
{
- /* no instructions saved */
+ /* No instructions saved. */
prev_insn = -1;
}
-
else
{
- if (extype)
- as_fatal(_("Unable to mix instructions as specified"));
- /* save off last instruction so it may be packed on next pass */
- memcpy(&prev_opcode, &opcode, sizeof(prev_opcode));
+ if (extype != EXEC_UNKNOWN)
+ as_bad (_("Unable to mix instructions as specified"));
+
+ /* Save off last instruction so it may be packed on next pass. */
+ memcpy (&prev_opcode, &opcode, sizeof (prev_opcode));
prev_insn = insn;
prev_seg = now_seg;
prev_subseg = now_subseg;
fixups = fixups->next;
+ prev_mul32_p = cur_mul32_p;
}
}
+/* Assemble a single instruction and return an opcode.
+ Return -1 (an invalid opcode) on error. */
-/* do_assemble assembles a single instruction and returns an opcode */
-/* it returns -1 (an invalid opcode) on error */
+#define NAME_BUF_LEN 20
static long long
-do_assemble (str, opcode, shortp)
+do_assemble (str, opcode, shortp, is_parallel)
char *str;
struct d30v_insn *opcode;
int shortp;
+ int is_parallel;
{
- unsigned char *op_start, *save;
+ unsigned char *op_start;
+ unsigned char *save;
unsigned char *op_end;
- char name[20];
- int cmp_hack, nlen = 0, fsize = (shortp ? FORCE_SHORT : 0);
- expressionS myops[6];
- long long insn;
-
- /* Drop leading whitespace */
+ char name[NAME_BUF_LEN];
+ int cmp_hack;
+ int nlen = 0;
+ int fsize = (shortp ? FORCE_SHORT : 0);
+ expressionS myops[6];
+ long long insn;
+
+ /* Drop leading whitespace. */
while (*str == ' ')
str++;
- /* find the opcode end */
+ /* Find the opcode end. */
for (op_start = op_end = (unsigned char *) (str);
*op_end
- && nlen < 20
+ && nlen < (NAME_BUF_LEN - 1)
&& *op_end != '/'
&& !is_end_of_line[*op_end] && *op_end != ' ';
op_end++)
{
- name[nlen] = tolower(op_start[nlen]);
+ name[nlen] = tolower (op_start[nlen]);
nlen++;
}
if (nlen == 0)
- return (-1);
+ return -1;
name[nlen] = 0;
- /* if there is an execution condition code, handle it */
+ /* If there is an execution condition code, handle it. */
if (*op_end == '/')
{
int i = 0;
- while ( (i < ECC_MAX) && strncasecmp(d30v_ecc_names[i],op_end+1,2))
+ while ((i < ECC_MAX) && strncasecmp (d30v_ecc_names[i], op_end + 1, 2))
i++;
-
+
if (i == ECC_MAX)
{
char tmp[4];
- strncpy(tmp,op_end+1,2);
+ strncpy (tmp, op_end + 1, 2);
tmp[2] = 0;
- as_fatal (_("unknown condition code: %s"),tmp);
+ as_bad (_("unknown condition code: %s"), tmp);
return -1;
}
- /* printf("condition code=%d\n",i); */
+#if 0
+ printf ("condition code=%d\n", i);
+#endif
opcode->ecc = i;
op_end += 3;
}
else
opcode->ecc = ECC_AL;
-
- /* CMP and CMPU change their name based on condition codes */
- if (!strncmp(name,"cmp",3))
+ /* CMP and CMPU change their name based on condition codes. */
+ if (!strncmp (name, "cmp", 3))
{
- int p,i;
- char **str = (char **)d30v_cc_names;
+ int p, i;
+ char **str = (char **) d30v_cc_names;
if (name[3] == 'u')
p = 4;
else
p = 3;
- for(i=1; *str && strncmp(*str,&name[p],2); i++, str++)
+ for (i = 1; *str && strncmp (*str, &name[p], 2); i++, str++)
;
- /* cmpu only supports some condition codes */
+ /* cmpu only supports some condition codes. */
if (p == 4)
{
if (i < 3 || i > 6)
{
- name[p+2]=0;
- as_fatal (_("cmpu doesn't support condition code %s"),&name[p]);
+ name[p + 2] = 0;
+ as_bad (_("cmpu doesn't support condition code %s"), &name[p]);
}
}
if (!*str)
{
- name[p+2]=0;
- as_fatal (_("unknown condition code: %s"),&name[p]);
+ name[p + 2] = 0;
+ as_bad (_("unknown condition code: %s"), &name[p]);
}
-
+
cmp_hack = i;
name[p] = 0;
}
else
cmp_hack = 0;
-
- /* printf("cmp_hack=%d\n",cmp_hack); */
- /* need to look for .s or .l */
- if (name[nlen-2] == '.')
+#if 0
+ printf ("cmp_hack=%d\n", cmp_hack);
+#endif
+
+ /* Need to look for .s or .l. */
+ if (name[nlen - 2] == '.')
{
- switch (name[nlen-1])
+ switch (name[nlen - 1])
{
case 's':
fsize = FORCE_SHORT;
fsize = FORCE_LONG;
break;
}
- name[nlen-2] = 0;
+ name[nlen - 2] = 0;
}
- /* find the first opcode with the proper name */
- opcode->op = (struct d30v_opcode *)hash_find (d30v_hash, name);
+ /* Find the first opcode with the proper name. */
+ opcode->op = (struct d30v_opcode *) hash_find (d30v_hash, name);
if (opcode->op == NULL)
- as_fatal (_("unknown opcode: %s"),name);
+ {
+ as_bad (_("unknown opcode: %s"), name);
+ return -1;
+ }
save = input_line_pointer;
input_line_pointer = op_end;
while (!(opcode->form = find_format (opcode->op, myops, fsize, cmp_hack)))
{
opcode->op++;
- if (strcmp(opcode->op->name,name))
- as_fatal (_("operands for opcode `%s' do not match any valid format"), name);
+ if (opcode->op->name == NULL || strcmp (opcode->op->name, name))
+ {
+ as_bad (_("operands for opcode `%s' do not match any valid format"),
+ name);
+ return -1;
+ }
}
input_line_pointer = save;
- insn = build_insn (opcode, myops);
+ insn = build_insn (opcode, myops);
- /* Propigate multiply status */
+ /* Propigate multiply status. */
if (insn != -1)
{
- prev_mul32_p = cur_mul32_p;
- cur_mul32_p = (opcode->op->flags_used & FLAG_MUL32) != 0;
+ if (is_parallel && prev_mul32_p)
+ cur_mul32_p = 1;
+ else
+ {
+ prev_mul32_p = cur_mul32_p;
+ cur_mul32_p = (opcode->op->flags_used & FLAG_MUL32) != 0;
+ }
}
- return (insn);
-}
+ /* Propagate left_kills_right status. */
+ if (insn != -1)
+ {
+ prev_left_kills_right_p = cur_left_kills_right_p;
+
+ if (opcode->op->flags_set & FLAG_LKR)
+ {
+ cur_left_kills_right_p = 1;
+
+ if (strcmp (opcode->op->name, "mvtsys") == 0)
+ {
+ /* Left kills right for only mvtsys only for
+ PSW/PSWH/PSWL/flags target. */
+ if ((myops[0].X_op == O_register) &&
+ ((myops[0].X_add_number == OPERAND_CONTROL) || /* psw */
+ (myops[0].X_add_number == OPERAND_CONTROL+MAX_CONTROL_REG+2) || /* pswh */
+ (myops[0].X_add_number == OPERAND_CONTROL+MAX_CONTROL_REG+1) || /* pswl */
+ (myops[0].X_add_number == OPERAND_FLAG+0) || /* f0 */
+ (myops[0].X_add_number == OPERAND_FLAG+1) || /* f1 */
+ (myops[0].X_add_number == OPERAND_FLAG+2) || /* f2 */
+ (myops[0].X_add_number == OPERAND_FLAG+3) || /* f3 */
+ (myops[0].X_add_number == OPERAND_FLAG+4) || /* f4 */
+ (myops[0].X_add_number == OPERAND_FLAG+5) || /* f5 */
+ (myops[0].X_add_number == OPERAND_FLAG+6) || /* f6 */
+ (myops[0].X_add_number == OPERAND_FLAG+7))) /* f7 */
+ {
+ cur_left_kills_right_p = 1;
+ }
+ else
+ {
+ /* Other mvtsys target registers don't kill right
+ instruction. */
+ cur_left_kills_right_p = 0;
+ }
+ } /* mvtsys */
+ }
+ else
+ cur_left_kills_right_p = 0;
+ }
+ return insn;
+}
-/* find_format() gets a pointer to an entry in the format table.
+/* Get a pointer to an entry in the format table.
It must look at all formats for an opcode and use the operands
- to choose the correct one. Returns NULL on error. */
+ to choose the correct one. Return NULL on error. */
static struct d30v_format *
find_format (opcode, myops, fsize, cmp_hack)
int fsize;
int cmp_hack;
{
- int numops, match, index, i=0, j, k;
+ int numops, match, index, i = 0, j, k;
struct d30v_format *fm;
+ if (opcode == NULL)
+ return NULL;
+
/* Get all the operands and save them as expressions. */
numops = get_operands (myops, cmp_hack);
if (fsize == FORCE_LONG && index < LONG)
continue;
- fm = (struct d30v_format *)&d30v_format_table[index];
+ fm = (struct d30v_format *) &d30v_format_table[index];
k = index;
while (fm->form == index)
{
int bits = d30v_operand_table[fm->operands[j]].bits;
int X_op = myops[j].X_op;
int num = myops[j].X_add_number;
-
+
if (flags & OPERAND_SPECIAL)
break;
else if (X_op == O_illegal)
{
if (X_op != O_register
|| ((flags & OPERAND_ACC) && !(num & OPERAND_ACC))
+ || (!(flags & OPERAND_ACC) && (num & OPERAND_ACC))
|| ((flags & OPERAND_FLAG) && !(num & OPERAND_FLAG))
+ || (!(flags & (OPERAND_FLAG | OPERAND_CONTROL)) && (num & OPERAND_FLAG))
|| ((flags & OPERAND_CONTROL)
&& !(num & (OPERAND_CONTROL | OPERAND_FLAG))))
{
}
}
else if (((flags & OPERAND_MINUS)
- && (X_op != O_absent || num != OPERAND_MINUS))
+ && (X_op != O_absent || num != OPERAND_MINUS))
|| ((flags & OPERAND_PLUS)
&& (X_op != O_absent || num != OPERAND_PLUS))
|| ((flags & OPERAND_ATMINUS)
|| ((flags & OPERAND_ATSIGN)
&& (X_op != O_absent || num != OPERAND_ATSIGN)))
{
- match=0;
+ match = 0;
}
else if (flags & OPERAND_NUM)
{
/* A number can be a constant or symbol expression. */
+ /* If we have found a register name, but that name
+ also matches a symbol, then re-parse the name as
+ an expression. */
+ if (X_op == O_register
+ && symbol_find ((char *) myops[j].X_op_symbol))
+ {
+ input_line_pointer = (char *) myops[j].X_op_symbol;
+ expression (&myops[j]);
+ }
+
/* Turn an expression into a symbol for later resolution. */
if (X_op != O_absent && X_op != O_constant
&& X_op != O_symbol && X_op != O_register
if (fm->form >= LONG)
{
- /* If we're testing for a LONG format, either fits. */
+ /* If we're testing for a LONG format, either fits. */
if (X_op != O_constant && X_op != O_symbol)
match = 0;
}
&& ((fsize == FORCE_SHORT && X_op == O_symbol)
|| (fm->form == SHORT_D2 && j == 0)))
match = 1;
+
/* This is the tricky part. Will the constant or symbol
- fit into the space in the current format? */
+ fit into the space in the current format? */
else if (X_op == O_constant)
{
if (check_range (num, bits, flags))
match = 0;
}
else if (X_op == O_symbol
- && S_IS_DEFINED(myops[j].X_add_symbol)
- && S_GET_SEGMENT(myops[j].X_add_symbol) == now_seg
+ && S_IS_DEFINED (myops[j].X_add_symbol)
+ && S_GET_SEGMENT (myops[j].X_add_symbol) == now_seg
&& opcode->reloc_flag == RELOC_PCREL)
{
/* If the symbol is defined, see if the value will fit
- into the form we're considering. */
+ into the form we're considering. */
fragS *f;
long value;
value = 0;
for (f = frchain_now->frch_root; f; f = f->fr_next)
value += f->fr_fix + f->fr_offset;
- value = (S_GET_VALUE(myops[j].X_add_symbol) - value
- - (obstack_next_free(&frchain_now->frch_obstack)
+ value = (S_GET_VALUE (myops[j].X_add_symbol) - value
+ - (obstack_next_free (&frchain_now->frch_obstack)
- frag_now->fr_literal));
- if (check_range (value, bits, flags))
+ if (check_range (value, bits, flags))
match = 0;
}
else
match = 0;
}
}
- /* printf("through the loop: match=%d\n",match); */
+#if 0
+ printf ("through the loop: match=%d\n", match);
+#endif
/* We're only done if the operands matched so far AND there
are no more to check. */
- if (match && myops[j].X_op == 0)
- return fm;
- fm = (struct d30v_format *)&d30v_format_table[++k];
+ if (match && myops[j].X_op == 0)
+ {
+ /* Final check - issue a warning if an odd numbered register
+ is used as the first register in an instruction that reads
+ or writes 2 registers. */
+
+ for (j = 0; fm->operands[j]; j++)
+ if (myops[j].X_op == O_register
+ && (myops[j].X_add_number & 1)
+ && (d30v_operand_table[fm->operands[j]].flags & OPERAND_2REG))
+ as_warn (_("Odd numbered register used as target of multi-register instruction"));
+
+ return fm;
+ }
+ fm = (struct d30v_format *) &d30v_format_table[++k];
}
- /* printf("trying another format: i=%d\n",i); */
+#if 0
+ printf ("trying another format: i=%d\n", i);
+#endif
}
return NULL;
}
-/* if while processing a fixup, a reloc really needs to be created */
-/* then it is done here */
-
+/* If while processing a fixup, a reloc really needs to be created,
+ then it is done here. */
+
arelent *
tc_gen_reloc (seg, fixp)
asection *seg;
{
arelent *reloc;
reloc = (arelent *) xmalloc (sizeof (arelent));
- reloc->sym_ptr_ptr = &fixp->fx_addsy->bsym;
+ reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
+ *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
reloc->howto = bfd_reloc_type_lookup (stdoutput, fixp->fx_r_type);
if (reloc->howto == (reloc_howto_type *) NULL)
{
as_bad_where (fixp->fx_file, fixp->fx_line,
- _("reloc %d not supported by object file format"), (int)fixp->fx_r_type);
+ _("reloc %d not supported by object file format"),
+ (int) fixp->fx_r_type);
return NULL;
}
reloc->addend = fixp->fx_addnumber;
{
abort ();
return 0;
-}
+}
long
md_pcrel_from_section (fixp, sec)
fixS *fixp;
segT sec;
{
- if (fixp->fx_addsy != (symbolS *)NULL && (!S_IS_DEFINED (fixp->fx_addsy) ||
- (S_GET_SEGMENT (fixp->fx_addsy) != sec)))
+ if (fixp->fx_addsy != (symbolS *) NULL
+ && (!S_IS_DEFINED (fixp->fx_addsy)
+ || (S_GET_SEGMENT (fixp->fx_addsy) != sec)))
return 0;
return fixp->fx_frag->fr_address + fixp->fx_where;
}
fixp->fx_done = 1;
}
else if (fixp->fx_pcrel)
- {
- value = *valuep;
- }
+ value = *valuep;
else
{
value = fixp->fx_offset;
+
if (fixp->fx_subsy != (symbolS *) NULL)
{
- if (S_GET_SEGMENT (fixp->fx_subsy) == absolute_section)
+ if (S_GET_SEGMENT (fixp->fx_subsy) == absolute_section)
value -= S_GET_VALUE (fixp->fx_subsy);
else
{
}
}
}
-
+
/* Fetch the instruction, insert the fully resolved operand
value, and stuff the instruction back again. */
where = fixp->fx_frag->fr_literal + fixp->fx_where;
insn = bfd_getb32 ((unsigned char *) where);
-
+
switch (fixp->fx_r_type)
{
+ case BFD_RELOC_8: /* Check for a bad .byte directive. */
+ if (fixp->fx_addsy != NULL)
+ as_bad (_("line %d: unable to place address of symbol '%s' into a byte"),
+ fixp->fx_line, S_GET_NAME (fixp->fx_addsy));
+ else if (((unsigned)value) > 0xff)
+ as_bad (_("line %d: unable to place value %x into a byte"),
+ fixp->fx_line, value);
+ else
+ *(unsigned char *) where = value;
+ break;
+
+ case BFD_RELOC_16: /* Check for a bad .short directive. */
+ if (fixp->fx_addsy != NULL)
+ as_bad (_("line %d: unable to place address of symbol '%s' into a short"),
+ fixp->fx_line, S_GET_NAME (fixp->fx_addsy));
+ else if (((unsigned)value) > 0xffff)
+ as_bad (_("line %d: unable to place value %x into a short"),
+ fixp->fx_line, value);
+ else
+ bfd_putb16 ((bfd_vma) value, (unsigned char *) where);
+ break;
+
+ case BFD_RELOC_64: /* Check for a bad .quad directive. */
+ if (fixp->fx_addsy != NULL)
+ as_bad (_("line %d: unable to place address of symbol '%s' into a quad"),
+ fixp->fx_line, S_GET_NAME (fixp->fx_addsy));
+ else
+ {
+ bfd_putb32 ((bfd_vma) value, (unsigned char *) where);
+ bfd_putb32 (0, ((unsigned char *) where) + 4);
+ }
+ break;
+
case BFD_RELOC_D30V_6:
check_size (value, 6, fixp->fx_file, fixp->fx_line);
insn |= value & 0x3F;
case BFD_RELOC_D30V_32:
insn2 = bfd_getb32 ((unsigned char *) where + 4);
- insn |= (value >> 26) & 0x3F; /* top 6 bits */
- insn2 |= ((value & 0x03FC0000) << 2); /* next 8 bits */
- insn2 |= value & 0x0003FFFF; /* bottom 18 bits */
+ insn |= (value >> 26) & 0x3F; /* Top 6 bits. */
+ insn2 |= ((value & 0x03FC0000) << 2); /* Next 8 bits. */
+ insn2 |= value & 0x0003FFFF; /* Bottom 18 bits. */
bfd_putb32 ((bfd_vma) insn, (unsigned char *) where);
bfd_putb32 ((bfd_vma) insn2, (unsigned char *) where + 4);
break;
case BFD_RELOC_D30V_32_PCREL:
insn2 = bfd_getb32 ((unsigned char *) where + 4);
- insn |= (value >> 26) & 0x3F; /* top 6 bits */
- insn2 |= ((value & 0x03FC0000) << 2); /* next 8 bits */
- insn2 |= value & 0x0003FFFF; /* bottom 18 bits */
+ insn |= (value >> 26) & 0x3F; /* Top 6 bits. */
+ insn2 |= ((value & 0x03FC0000) << 2); /* Next 8 bits. */
+ insn2 |= value & 0x0003FFFF; /* Bottom 18 bits. */
bfd_putb32 ((bfd_vma) insn, (unsigned char *) where);
bfd_putb32 ((bfd_vma) insn2, (unsigned char *) where + 4);
break;
break;
default:
- as_fatal (_("line %d: unknown relocation type: 0x%x"),fixp->fx_line,fixp->fx_r_type);
+ as_bad (_("line %d: unknown relocation type: 0x%x"),
+ fixp->fx_line, fixp->fx_r_type);
}
+
return 0;
}
+/* Called after the assembler has finished parsing the input file or
+ after a label is defined. Because the D30V assembler sometimes
+ saves short instructions to see if it can package them with the
+ next instruction, there may be a short instruction that still needs
+ written. */
-/* d30v_cleanup() is called after the assembler has finished parsing the input
- file or after a label is defined. Because the D30V assembler sometimes saves short
- instructions to see if it can package them with the next instruction, there may
- be a short instruction that still needs written. */
int
-d30v_cleanup ()
+d30v_cleanup (use_sequential)
+ int use_sequential;
{
segT seg;
subsegT subseg;
seg = now_seg;
subseg = now_subseg;
subseg_set (prev_seg, prev_subseg);
- write_1_short (&prev_opcode, (long)prev_insn, fixups->next);
+ write_1_short (&prev_opcode, (long) prev_insn, fixups->next,
+ use_sequential);
subseg_set (seg, subseg);
prev_insn = -1;
+ if (use_sequential)
+ prev_mul32_p = false;
}
+
return 1;
}
-static void
+static void
d30v_number_to_chars (buf, value, n)
- char *buf; /* Return 'nbytes' of chars here. */
- long long value; /* The value of the bits. */
- int n; /* Number of bytes in the output. */
+ char *buf; /* Return 'nbytes' of chars here. */
+ long long value; /* The value of the bits. */
+ int n; /* Number of bytes in the output. */
{
while (n--)
{
}
}
+/* This function is called at the start of every line. It checks to
+ see if the first character is a '.', which indicates the start of a
+ pseudo-op. If it is, then write out any unwritten instructions. */
-/* This function is called at the start of every line. */
-/* it checks to see if the first character is a '.' */
-/* which indicates the start of a pseudo-op. If it is, */
-/* then write out any unwritten instructions */
-
-void
-d30v_start_line()
+void
+d30v_start_line ()
{
char *c = input_line_pointer;
- while(isspace(*c))
+ while (isspace (*c))
c++;
- if (*c == '.')
- d30v_cleanup();
+ if (*c == '.')
+ d30v_cleanup (false);
}
-static void
+static void
check_size (value, bits, file, line)
long value;
int bits;
tmp = ~value;
else
tmp = value;
-
+
max = (1 << (bits - 1)) - 1;
if (tmp > max)
symbolS *lab;
{
/* Emit any pending instructions. */
- d30v_cleanup();
+ d30v_cleanup (false);
/* Update the label's address with the current output pointer. */
- lab->sy_frag = frag_now;
+ symbol_set_frag (lab, frag_now);
S_SET_VALUE (lab, (valueT) frag_now_fix ());
/* Record this label for future adjustment after we find out what
temporarily when -g is in effect. */
int switched_seg_p = (d30v_current_align_seg != now_seg);
- if (d30v_current_align >= n && !switched_seg_p)
- return;
-
- d30v_cleanup();
+ /* Do not assume that if 'd30v_current_align >= n' and
+ '! switched_seg_p' that it is safe to avoid performing
+ this alignement request. The alignment of the current frag
+ can be changed under our feet, for example by a .ascii
+ directive in the source code. cf testsuite/gas/d30v/reloc.s */
+ d30v_cleanup (false);
if (pfill == NULL)
{
if (label != NULL)
{
- symbolS * sym;
- int label_seen = false;
- struct frag * old_frag;
- valueT old_value;
- valueT new_value;
-
+ symbolS *sym;
+ int label_seen = false;
+ struct frag *old_frag;
+ valueT old_value;
+ valueT new_value;
+
assert (S_GET_SEGMENT (label) == now_seg);
- old_frag = label->sy_frag;
+ old_frag = symbol_get_frag (label);
old_value = S_GET_VALUE (label);
- new_value = (valueT) frag_now_fix();
-
+ new_value = (valueT) frag_now_fix ();
+
/* It is possible to have more than one label at a particular
address, especially if debugging is enabled, so we must
take care to adjust all the labels at this address in this
in the target fragment. Note, this search is guaranteed to
find at least one match when sym == label, so no special case
code is necessary. */
- for (sym = symbol_lastP; sym != NULL; sym = sym->sy_previous)
+ for (sym = symbol_lastP; sym != NULL; sym = symbol_previous (sym))
{
- if (sym->sy_frag == old_frag && S_GET_VALUE (sym) == old_value)
+ if (symbol_get_frag (sym) == old_frag
+ && S_GET_VALUE (sym) == old_value)
{
label_seen = true;
- sym->sy_frag = frag_now;
+ symbol_set_frag (sym, frag_now);
S_SET_VALUE (sym, new_value);
}
- else if (label_seen && sym->sy_frag != old_frag)
+ else if (label_seen && symbol_get_frag (sym) != old_frag)
break;
}
}
- record_alignment(now_seg, n);
+ record_alignment (now_seg, n);
}
/* Handle the .align pseudo-op. This aligns to a power of two. We