/* tc-h8300.c -- Assemble code for the Renesas H8/300
- Copyright 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 2000,
- 2001, 2002, 2003 Free Software Foundation, Inc.
+ Copyright (C) 1991-2015 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ the Free Software Foundation; either version 3, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to the Free
- Software Foundation, 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA. */
+ Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
+ 02110-1301, USA. */
/* Written By Steve Chamberlain <sac@cygnus.com>. */
-#include <stdio.h>
#include "as.h"
#include "subsegs.h"
-#include "bfd.h"
-
-#ifdef BFD_ASSEMBLER
#include "dwarf2dbg.h"
-#endif
#define DEFINE_TABLE
#define h8_opcodes ops
const char line_comment_chars[] = "#";
const char line_separator_chars[] = "";
-void cons PARAMS ((int));
-void sbranch PARAMS ((int));
-void h8300hmode PARAMS ((int));
-void h8300smode PARAMS ((int));
-void h8300hnmode PARAMS ((int));
-void h8300snmode PARAMS ((int));
-void h8300sxmode PARAMS ((int));
-static void pint PARAMS ((int));
+static void sbranch (int);
+static void h8300hmode (int);
+static void h8300smode (int);
+static void h8300hnmode (int);
+static void h8300snmode (int);
+static void h8300sxmode (int);
+static void h8300sxnmode (int);
+static void pint (int);
int Hmode;
int Smode;
int Nmode;
int SXmode;
-#define PSIZE (Hmode ? L_32 : L_16)
-#define DSYMMODE (Hmode ? L_24 : L_16)
+#define PSIZE (Hmode && !Nmode ? L_32 : L_16)
-int bsize = L_8; /* Default branch displacement. */
+static int bsize = L_8; /* Default branch displacement. */
struct h8_instruction
{
const struct h8_opcode *opcode;
};
-struct h8_instruction *h8_instructions;
+static struct h8_instruction *h8_instructions;
-void
-h8300hmode (arg)
- int arg ATTRIBUTE_UNUSED;
+static void
+h8300hmode (int arg ATTRIBUTE_UNUSED)
{
Hmode = 1;
Smode = 0;
-#ifdef BFD_ASSEMBLER
if (!bfd_set_arch_mach (stdoutput, bfd_arch_h8300, bfd_mach_h8300h))
as_warn (_("could not set architecture and machine"));
-#endif
}
-void
-h8300smode (arg)
- int arg ATTRIBUTE_UNUSED;
+static void
+h8300smode (int arg ATTRIBUTE_UNUSED)
{
Smode = 1;
Hmode = 1;
-#ifdef BFD_ASSEMBLER
if (!bfd_set_arch_mach (stdoutput, bfd_arch_h8300, bfd_mach_h8300s))
as_warn (_("could not set architecture and machine"));
-#endif
}
-void
-h8300hnmode (arg)
- int arg ATTRIBUTE_UNUSED;
+static void
+h8300hnmode (int arg ATTRIBUTE_UNUSED)
{
Hmode = 1;
Smode = 0;
Nmode = 1;
-#ifdef BFD_ASSEMBLER
if (!bfd_set_arch_mach (stdoutput, bfd_arch_h8300, bfd_mach_h8300hn))
as_warn (_("could not set architecture and machine"));
-#endif
}
-void
-h8300snmode (arg)
- int arg ATTRIBUTE_UNUSED;
+static void
+h8300snmode (int arg ATTRIBUTE_UNUSED)
{
Smode = 1;
Hmode = 1;
Nmode = 1;
-#ifdef BFD_ASSEMBLER
if (!bfd_set_arch_mach (stdoutput, bfd_arch_h8300, bfd_mach_h8300sn))
as_warn (_("could not set architecture and machine"));
-#endif
}
-void
-h8300sxmode (arg)
- int arg ATTRIBUTE_UNUSED;
+static void
+h8300sxmode (int arg ATTRIBUTE_UNUSED)
{
Smode = 1;
Hmode = 1;
SXmode = 1;
-#ifdef BFD_ASSEMBLER
if (!bfd_set_arch_mach (stdoutput, bfd_arch_h8300, bfd_mach_h8300sx))
as_warn (_("could not set architecture and machine"));
-#endif
}
-void
-h8300sxnmode (arg)
- int arg ATTRIBUTE_UNUSED;
+static void
+h8300sxnmode (int arg ATTRIBUTE_UNUSED)
{
Smode = 1;
Hmode = 1;
SXmode = 1;
Nmode = 1;
-#ifdef BFD_ASSEMBLER
if (!bfd_set_arch_mach (stdoutput, bfd_arch_h8300, bfd_mach_h8300sxn))
as_warn (_("could not set architecture and machine"));
-#endif
}
-void
-sbranch (size)
- int size;
+static void
+sbranch (int size)
{
bsize = size;
}
static void
-pint (arg)
- int arg ATTRIBUTE_UNUSED;
+pint (int arg ATTRIBUTE_UNUSED)
{
cons (Hmode ? 4 : 2);
}
+/* Like obj_elf_section, but issues a warning for new
+ sections which do not have an attribute specification. */
+
+static void
+h8300_elf_section (int push)
+{
+ static const char * known_data_sections [] = { ".rodata", ".tdata", ".tbss" };
+ static const char * known_data_prefixes [] = { ".debug", ".zdebug", ".gnu.warning" };
+ char * saved_ilp = input_line_pointer;
+ char * name;
+
+ name = obj_elf_section_name ();
+ if (name == NULL)
+ return;
+
+ if (* input_line_pointer != ','
+ && bfd_get_section_by_name (stdoutput, name) == NULL)
+ {
+ signed int i;
+
+ /* Ignore this warning for well known data sections. */
+ for (i = ARRAY_SIZE (known_data_sections); i--;)
+ if (strcmp (name, known_data_sections[i]) == 0)
+ break;
+
+ if (i < 0)
+ for (i = ARRAY_SIZE (known_data_prefixes); i--;)
+ if (strncmp (name, known_data_prefixes[i],
+ strlen (known_data_prefixes[i])) == 0)
+ break;
+
+ if (i < 0)
+ as_warn (_("new section '%s' defined without attributes - this might cause problems"), name);
+ }
+
+ /* FIXME: We ought to free the memory allocated by obj_elf_section_name()
+ for 'name', but we do not know if it was taken from the obstack, via
+ demand_copy_C_string(), or xmalloc()ed. */
+ input_line_pointer = saved_ilp;
+ obj_elf_section (push);
+}
+
/* This table describes all the machine specific pseudo-ops the assembler
has to support. The fields are:
pseudo-op name without dot
{"import", s_ignore, 0},
{"page", listing_eject, 0},
{"program", s_ignore, 0},
+
+#ifdef OBJ_ELF
+ {"section", h8300_elf_section, 0},
+ {"section.s", h8300_elf_section, 0},
+ {"sect", h8300_elf_section, 0},
+ {"sect.s", h8300_elf_section, 0},
+#endif
+
{0, 0, 0}
};
-const int md_reloc_size;
-
const char EXP_CHARS[] = "eE";
/* Chars that mean this number is a floating point constant
needs. */
void
-md_begin ()
+md_begin (void)
{
unsigned int nopcodes;
struct h8_opcode *p, *p1;
char prev_buffer[100];
int idx = 0;
-#ifdef BFD_ASSEMBLER
if (!bfd_set_arch_mach (stdoutput, bfd_arch_h8300, bfd_mach_h8300))
as_warn (_("could not set architecture and machine"));
-#endif
opcode_hash_control = hash_new ();
prev_buffer[0] = 0;
linkrelax = 1;
}
-struct h8_exp
-{
- char *e_beg;
- char *e_end;
- expressionS e_exp;
-};
-
struct h8_op
{
op_type mode;
expressionS exp;
};
-static void clever_message PARAMS ((const struct h8_instruction *, struct h8_op *));
-static void fix_operand_size PARAMS ((struct h8_op *, int));
-static void build_bytes PARAMS ((const struct h8_instruction *, struct h8_op *));
-static void do_a_fix_imm PARAMS ((int, int, struct h8_op *, int));
-static void check_operand PARAMS ((struct h8_op *, unsigned int, char *));
-static const struct h8_instruction * get_specific PARAMS ((const struct h8_instruction *, struct h8_op *, int));
-static char * get_operands PARAMS ((unsigned, char *, struct h8_op *));
-static void get_operand PARAMS ((char **, struct h8_op *, int));
-static char * skip_colonthing PARAMS ((char *, expressionS *, int *));
-static char * parse_exp PARAMS ((char *, expressionS *));
-static int parse_reg PARAMS ((char *, op_type *, unsigned *, int));
-char * colonmod24 PARAMS ((struct h8_op *, char *));
-
-static int constant_fits_width_p PARAMS ((struct h8_op *, unsigned int));
-static int constant_fits_size_p PARAMS ((struct h8_op *, int, int));
+static void clever_message (const struct h8_instruction *, struct h8_op *);
+static void fix_operand_size (struct h8_op *, int);
+static void build_bytes (const struct h8_instruction *, struct h8_op *);
+static void do_a_fix_imm (int, int, struct h8_op *, int, const struct h8_instruction *);
+static void check_operand (struct h8_op *, unsigned int, char *);
+static const struct h8_instruction * get_specific (const struct h8_instruction *, struct h8_op *, int) ;
+static char *get_operands (unsigned, char *, struct h8_op *);
+static void get_operand (char **, struct h8_op *, int);
+static int parse_reg (char *, op_type *, unsigned *, int);
+static char *skip_colonthing (char *, int *);
+static char *parse_exp (char *, struct h8_op *);
+
+static int constant_fits_size_p (struct h8_op *, int, int);
/*
parse operands
/* Try to parse a reg name. Return the number of chars consumed. */
static int
-parse_reg (src, mode, reg, direction)
- char *src;
- op_type *mode;
- unsigned int *reg;
- int direction;
+parse_reg (char *src, op_type *mode, unsigned int *reg, int direction)
{
char *end;
int len;
return 0;
}
+
+/* Parse an immediate or address-related constant and store it in OP.
+ If the user also specifies the operand's size, store that size
+ in OP->MODE, otherwise leave it for later code to decide. */
+
static char *
-parse_exp (s, op)
- char *s;
- expressionS *op;
+parse_exp (char *src, struct h8_op *op)
{
- char *save = input_line_pointer;
- char *new;
+ char *save;
- input_line_pointer = s;
- expression (op);
- if (op->X_op == O_absent)
+ save = input_line_pointer;
+ input_line_pointer = src;
+ expression (&op->exp);
+ if (op->exp.X_op == O_absent)
as_bad (_("missing operand"));
- new = input_line_pointer;
+ src = input_line_pointer;
input_line_pointer = save;
- return new;
+
+ return skip_colonthing (src, &op->mode);
}
+
+/* If SRC starts with an explicit operand size, skip it and store the size
+ in *MODE. Leave *MODE unchanged otherwise. */
+
static char *
-skip_colonthing (ptr, exp, mode)
- char *ptr;
- expressionS *exp ATTRIBUTE_UNUSED;
- int *mode;
+skip_colonthing (char *src, int *mode)
{
- if (*ptr == ':')
+ if (*src == ':')
{
- ptr++;
+ src++;
*mode &= ~SIZE;
- if (ptr[0] == '8' && ! ISDIGIT (ptr[1]))
+ if (src[0] == '8' && !ISDIGIT (src[1]))
*mode |= L_8;
- else if (ptr[0] == '2' && ! ISDIGIT (ptr[1]))
+ else if (src[0] == '2' && !ISDIGIT (src[1]))
*mode |= L_2;
- else if (ptr[0] == '3' && ! ISDIGIT (ptr[1]))
+ else if (src[0] == '3' && !ISDIGIT (src[1]))
*mode |= L_3;
- else if (ptr[0] == '4' && ! ISDIGIT (ptr[1]))
+ else if (src[0] == '4' && !ISDIGIT (src[1]))
*mode |= L_4;
- else if (ptr[0] == '5' && ! ISDIGIT (ptr[1]))
+ else if (src[0] == '5' && !ISDIGIT (src[1]))
*mode |= L_5;
- else if (ptr[0] == '2' && ptr[1] == '4')
+ else if (src[0] == '2' && src[1] == '4' && !ISDIGIT (src[2]))
*mode |= L_24;
- else if (ptr[0] == '3' && ptr[1] == '2')
+ else if (src[0] == '3' && src[1] == '2' && !ISDIGIT (src[2]))
*mode |= L_32;
- else if (ptr[0] == '1' && ptr[1] == '6')
+ else if (src[0] == '1' && src[1] == '6' && !ISDIGIT (src[2]))
*mode |= L_16;
else
as_bad (_("invalid operand size requested"));
- while (ISDIGIT (*ptr))
- ptr++;
+ while (ISDIGIT (*src))
+ src++;
}
- return ptr;
+ return src;
}
/* The many forms of operand:
@(exp:[8], pc) pc rel
@@aa[:8] memory indirect. */
-char *
-colonmod24 (op, src)
- struct h8_op *op;
- char *src;
+static int
+constant_fits_width_p (struct h8_op *operand, offsetT width)
{
- int mode = 0;
- src = skip_colonthing (src, &op->exp, &mode);
-
- if (!mode)
- {
- /* If the operand is a 16-bit constant integer, leave fix_operand_size
- to calculate its size. Otherwise choose a default here. */
- if (op->exp.X_add_number < -32768
- || op->exp.X_add_number > 32767)
- {
- if (Hmode)
- mode = L_24;
- else
- mode = L_16;
- }
- else if (op->exp.X_add_symbol
- || op->exp.X_op_symbol)
- mode = DSYMMODE;
- }
+ offsetT num;
- op->mode |= mode;
- return src;
+ num = ((operand->exp.X_add_number & 0xffffffff) ^ 0x80000000) - 0x80000000;
+ return (num & ~width) == 0 || (num | width) == ~0;
}
static int
-constant_fits_width_p (operand, width)
- struct h8_op *operand;
- unsigned int width;
+constant_fits_size_p (struct h8_op *operand, int size, int no_symbols)
{
- return ((operand->exp.X_add_number & ~width) == 0
- || (operand->exp.X_add_number | width) == (unsigned)(~0));
-}
+ offsetT num;
-static int
-constant_fits_size_p (operand, size, no_symbols)
- struct h8_op *operand;
- int size, no_symbols;
-{
- offsetT num = operand->exp.X_add_number;
if (no_symbols
&& (operand->exp.X_add_symbol != 0 || operand->exp.X_op_symbol != 0))
return 0;
+ num = operand->exp.X_add_number & 0xffffffff;
switch (size)
{
case L_2:
case L_5:
return num >= 1 && num < 32;
case L_8:
- return (num & ~0xFF) == 0 || ((unsigned)num | 0x7F) == ~0u;
+ num = (num ^ 0x80000000) - 0x80000000;
+ return (num & ~0xFF) == 0 || (num | 0x7F) == ~0;
case L_8U:
return (num & ~0xFF) == 0;
case L_16:
- return (num & ~0xFFFF) == 0 || ((unsigned)num | 0x7FFF) == ~0u;
+ num = (num ^ 0x80000000) - 0x80000000;
+ return (num & ~0xFFFF) == 0 || (num | 0x7FFF) == ~0;
case L_16U:
return (num & ~0xFFFF) == 0;
case L_32:
}
static void
-get_operand (ptr, op, direction)
- char **ptr;
- struct h8_op *op;
- int direction;
+get_operand (char **ptr, struct h8_op *op, int direction)
{
char *src = *ptr;
op_type mode;
low = src[2] - '0';
high = src[6] - '0';
- if (high == low)
- as_bad (_("Invalid register list for ldm/stm\n"));
-
- if (high < low)
+ /* Check register pair's validity as per tech note TN-H8*-193A/E
+ from Renesas for H8S and H8SX hardware manual. */
+ if ( !(low == 0 && (high == 1 || high == 2 || high == 3))
+ && !(low == 1 && (high == 2 || high == 3 || high == 4) && SXmode)
+ && !(low == 2 && (high == 3 || ((high == 4 || high == 5) && SXmode)))
+ && !(low == 3 && (high == 4 || high == 5 || high == 6) && SXmode)
+ && !(low == 4 && (high == 5 || high == 6))
+ && !(low == 4 && high == 7 && SXmode)
+ && !(low == 5 && (high == 6 || high == 7) && SXmode)
+ && !(low == 6 && high == 7 && SXmode))
as_bad (_("Invalid register list for ldm/stm\n"));
- if (high - low > 3)
- as_bad (_("Invalid register list for ldm/stm)\n"));
-
/* Even sicker. We encode two registers into op->reg. One
for the low register to save, the other for the high
register to save; we also set the high bit in op->reg
op->mode = (op->mode & ~SIZE) | L_8;
break;
default:
- as_warn ("invalid suffix after register.");
+ as_warn (_("invalid suffix after register."));
break;
}
src += 2;
src++;
if (*src == '@')
{
- src++;
- src = parse_exp (src, &op->exp);
-
- src = skip_colonthing (src, &op->exp, &op->mode);
-
- *ptr = src;
-
+ *ptr = parse_exp (src + 1, op);
if (op->exp.X_add_number >= 0x100)
{
- int divisor;
+ int divisor = 1;
op->mode = VECIND;
/* FIXME : 2? or 4? */
}
else
op->mode = MEMIND;
-
return;
}
if (*src == '-' || *src == '+')
{
- char c = *src;
- src++;
- len = parse_reg (src, &mode, &num, direction);
+ len = parse_reg (src + 1, &mode, &num, direction);
if (len == 0)
{
/* Oops, not a reg after all, must be ordinary exp. */
- src--;
- /* Must be a symbol. */
- op->mode = ABS | PSIZE | direction;
- *ptr = skip_colonthing (parse_exp (src, &op->exp),
- &op->exp, &op->mode);
-
+ op->mode = ABS | direction;
+ *ptr = parse_exp (src, op);
return;
}
- if ((mode & SIZE) != PSIZE)
+ if (((mode & SIZE) != PSIZE)
+ /* For Normal mode accept 16 bit and 32 bit pointer registers. */
+ && (!Nmode || ((mode & SIZE) != L_32)))
as_bad (_("Wrong size pointer register for architecture."));
- op->mode = c == '-' ? RDPREDEC : RDPREINC;
+
+ op->mode = src[0] == '-' ? RDPREDEC : RDPREINC;
op->reg = num;
- *ptr = src + len;
+ *ptr = src + 1 + len;
return;
}
if (*src == '(')
/* Start off assuming a 16 bit offset. */
- src = parse_exp (src, &op->exp);
-
- src = colonmod24 (op, src);
-
+ src = parse_exp (src, op);
if (*src == ')')
{
- src++;
op->mode |= ABS | direction;
- *ptr = src;
+ *ptr = src + 1;
return;
}
{
as_bad (_("expected @(exp, reg16)"));
return;
-
}
src++;
}
else
op->mode |= DISP | direction;
- src = skip_colonthing (src, &op->exp, &op->mode);
+ src = skip_colonthing (src, &op->mode);
if (*src != ')' && '(')
{
return;
}
*ptr = src + 1;
-
return;
}
len = parse_reg (src, &mode, &num, direction);
src += len;
if (*src == '+' || *src == '-')
{
- if ((mode & SIZE) != PSIZE)
+ if (((mode & SIZE) != PSIZE)
+ /* For Normal mode accept 16 bit and 32 bit pointer registers. */
+ && (!Nmode || ((mode & SIZE) != L_32)))
as_bad (_("Wrong size pointer register for architecture."));
op->mode = *src == '+' ? RSPOSTINC : RSPOSTDEC;
op->reg = num;
*ptr = src;
return;
}
- if ((mode & SIZE) != PSIZE)
+ if (((mode & SIZE) != PSIZE)
+ /* For Normal mode accept 16 bit and 32 bit pointer registers. */
+ && (!Nmode || ((mode & SIZE) != L_32)))
as_bad (_("Wrong size pointer register for architecture."));
op->mode = direction | IND | PSIZE;
/* must be a symbol */
op->mode = ABS | direction;
- src = parse_exp (src, &op->exp);
-
- *ptr = colonmod24 (op, src);
-
+ *ptr = parse_exp (src, op);
return;
}
}
if (*src == '#')
{
- src++;
op->mode = IMM;
- src = parse_exp (src, &op->exp);
- *ptr = skip_colonthing (src, &op->exp, &op->mode);
-
+ *ptr = parse_exp (src + 1, op);
return;
}
else if (strncmp (src, "mach", 4) == 0 ||
}
else
{
- src = parse_exp (src, &op->exp);
- /* Trailing ':' size ? */
- if (*src == ':')
- {
- if (src[1] == '1' && src[2] == '6')
- {
- op->mode = PCREL | L_16;
- src += 3;
- }
- else if (src[1] == '8')
- {
- op->mode = PCREL | L_8;
- src += 2;
- }
- else
- as_bad (_("expect :8 or :16 here"));
- }
- else
- {
- int val = op->exp.X_add_number;
-
- op->mode = PCREL;
- if (-128 < val && val < 127)
- op->mode |= L_8;
- else
- op->mode |= L_16;
- }
-
- *ptr = src;
+ op->mode = PCREL;
+ *ptr = parse_exp (src, op);
}
}
static char *
-get_operands (noperands, op_end, operand)
- unsigned int noperands;
- char *op_end;
- struct h8_op *operand;
+get_operands (unsigned int noperands, char *op_end, struct h8_op *operand)
{
char *ptr = op_end;
goto error;
ptr += 3;
operand[0].mode = 0;
- ptr = parse_exp (ptr, &operand[0].exp);
- ptr = colonmod24 (operand + 0, ptr);
+ ptr = parse_exp (ptr, &operand[0]);
if (*ptr !=',')
goto error;
error:
as_bad (_("expected valid addressing mode for mova: \"@(disp, ea.sz),ERn\""));
- return;
}
static void
get_rtsl_operands (char *ptr, struct h8_op *operand)
{
- int mode, num, num2, len, type = 0;
+ int mode, len, type = 0;
+ unsigned int num, num2;
ptr++;
if (*ptr == '(')
ptr += len;
/* CONST_xxx are used as placeholders in the opcode table. */
num = num2 - num;
- if (num < 0 || num > 3)
+ if (num > 3)
{
as_bad (_("invalid register list"));
return;
provided. */
static const struct h8_instruction *
-get_specific (instruction, operands, size)
- const struct h8_instruction *instruction;
- struct h8_op *operands;
- int size;
+get_specific (const struct h8_instruction *instruction,
+ struct h8_op *operands, int size)
{
const struct h8_instruction *this_try = instruction;
const struct h8_instruction *found_other = 0, *found_mismatched = 0;
}
else if (x_mode == IMM && op_mode != IMM)
{
- offsetT num = operands[i].exp.X_add_number;
+ offsetT num = operands[i].exp.X_add_number & 0xffffffff;
if (op_mode == KBIT || op_mode == DBIT)
/* This is ok if the immediate value is sensible. */;
else if (op_mode == CONST_2)
}
else if (op_mode == PCREL && op_mode == x_mode)
{
- /* movsd only comes in PCREL16 flavour:
+ /* movsd, bsr/bc and bsr/bs only come in PCREL16 flavour:
If x_size is L_8, promote it. */
- if (OP_KIND (this_try->opcode->how) == O_MOVSD)
+ if (OP_KIND (this_try->opcode->how) == O_MOVSD
+ || OP_KIND (this_try->opcode->how) == O_BSRBC
+ || OP_KIND (this_try->opcode->how) == O_BSRBS)
if (x_size == L_8)
x_size = L_16;
x |= x_size = L_32;
}
-#if 0 /* ??? */
- /* Promote an L8 to L_16 if it makes us match. */
- if ((op_mode == ABS || op_mode == DISP) && x_size == L_8)
- {
- if (op_size == L_16)
- x_size = L_16;
- }
-#endif
-
if (((x_size == L_16 && op_size == L_16U)
|| (x_size == L_8 && op_size == L_8U)
|| (x_size == L_3 && op_size == L_3NZ))
}
static void
-check_operand (operand, width, string)
- struct h8_op *operand;
- unsigned int width;
- char *string;
+check_operand (struct h8_op *operand, unsigned int width, char *string)
{
if (operand->exp.X_add_symbol == 0
&& operand->exp.X_op_symbol == 0)
(may relax into an 8bit absolute address). */
static void
-do_a_fix_imm (offset, nibble, operand, relaxmode)
- int offset, nibble;
- struct h8_op *operand;
- int relaxmode;
+do_a_fix_imm (int offset, int nibble, struct h8_op *operand, int relaxmode, const struct h8_instruction *this_try)
{
int idx;
int size;
check_operand (operand, 0xffff, t);
bytes[0] |= operand->exp.X_add_number >> 8;
bytes[1] |= operand->exp.X_add_number >> 0;
+#ifdef OBJ_ELF
+ /* MOVA needs both relocs to relax the second operand properly. */
+ if (relaxmode != 0
+ && (OP_KIND(this_try->opcode->how) == O_MOVAB
+ || OP_KIND(this_try->opcode->how) == O_MOVAW
+ || OP_KIND(this_try->opcode->how) == O_MOVAL))
+ {
+ idx = BFD_RELOC_16;
+ fix_new_exp (frag_now, offset, 2, &operand->exp, 0, idx);
+ }
+#endif
break;
case L_24:
check_operand (operand, 0xffffff, t);
bytes[3] |= operand->exp.X_add_number >> 0;
if (relaxmode != 0)
{
- idx = (relaxmode == 2) ? R_MOV24B1 : R_MOVL1;
+#ifdef OBJ_ELF
+ if ((operand->mode & MODE) == DISP && relaxmode == 1)
+ idx = BFD_RELOC_H8_DISP32A16;
+ else
+#endif
+ idx = (relaxmode == 2) ? R_MOV24B1 : R_MOVL1;
fix_new_exp (frag_now, offset, 4, &operand->exp, 0, idx);
}
break;
case L_32:
size = 4;
where = (operand->mode & SIZE) == L_24 ? -1 : 0;
+#ifdef OBJ_ELF
+ if ((operand->mode & MODE) == DISP && relaxmode == 1)
+ idx = BFD_RELOC_H8_DISP32A16;
+ else
+#endif
if (relaxmode == 2)
idx = R_MOV24B1;
else if (relaxmode == 1)
/* Now we know what sort of opcodes it is, let's build the bytes. */
static void
-build_bytes (this_try, operand)
- const struct h8_instruction *this_try;
- struct h8_op *operand;
+build_bytes (const struct h8_instruction *this_try, struct h8_op *operand)
{
int i;
char *output = frag_more (this_try->length);
- op_type *nibble_ptr = this_try->opcode->data.nib;
+ const op_type *nibble_ptr = this_try->opcode->data.nib;
op_type c;
unsigned int nibble_count = 0;
int op_at[3];
for (i = 0; i < this_try->length; i++)
output[i] = (asnibbles[i * 2] << 4) | asnibbles[i * 2 + 1];
- /* Note if this is a movb instruction -- there's a special relaxation
- which only applies to them. */
- if (this_try->opcode->how == O (O_MOV, SB))
+ /* Note if this is a mov.b or a bit manipulation instruction
+ there is a special relaxation which only applies. */
+ if ( this_try->opcode->how == O (O_MOV, SB)
+ || this_try->opcode->how == O (O_BCLR, SB)
+ || this_try->opcode->how == O (O_BAND, SB)
+ || this_try->opcode->how == O (O_BIAND, SB)
+ || this_try->opcode->how == O (O_BILD, SB)
+ || this_try->opcode->how == O (O_BIOR, SB)
+ || this_try->opcode->how == O (O_BIST, SB)
+ || this_try->opcode->how == O (O_BIXOR, SB)
+ || this_try->opcode->how == O (O_BLD, SB)
+ || this_try->opcode->how == O (O_BNOT, SB)
+ || this_try->opcode->how == O (O_BOR, SB)
+ || this_try->opcode->how == O (O_BSET, SB)
+ || this_try->opcode->how == O (O_BST, SB)
+ || this_try->opcode->how == O (O_BTST, SB)
+ || this_try->opcode->how == O (O_BXOR, SB))
movb = 1;
/* Output any fixes. */
int x_mode = x & MODE;
if (x_mode == IMM || x_mode == DISP)
- do_a_fix_imm (output - frag_now->fr_literal + op_at[i] / 2,
- op_at[i] & 1, operand + i, (x & MEMRELAX) != 0);
-
+ {
+#ifndef OBJ_ELF
+ /* Remove MEMRELAX flag added in h8300.h on mov with
+ addressing mode "register indirect with displacement". */
+ if (x_mode == DISP)
+ x &= ~MEMRELAX;
+#endif
+ do_a_fix_imm (output - frag_now->fr_literal + op_at[i] / 2,
+ op_at[i] & 1, operand + i, (x & MEMRELAX) != 0,
+ this_try);
+ }
else if (x_mode == ABS)
do_a_fix_imm (output - frag_now->fr_literal + op_at[i] / 2,
op_at[i] & 1, operand + i,
- (x & MEMRELAX) ? movb + 1 : 0);
+ (x & MEMRELAX) ? movb + 1 : 0,
+ this_try);
else if (x_mode == PCREL)
{
detect errors. */
static void
-clever_message (instruction, operand)
- const struct h8_instruction *instruction;
- struct h8_op *operand;
+clever_message (const struct h8_instruction *instruction,
+ struct h8_op *operand)
{
/* Find out if there was more than one possible opcode. */
}
-/* Adjust OPERAND's value and size given that it is accessing a field
- of SIZE bytes.
+/* If OPERAND is part of an address, adjust its size and value given
+ that it addresses SIZE bytes.
- This function handles the choice between @(d:2,ERn) and @(d:16,ERn)
- when no size is explicitly given. It also scales down the assembly-level
+ This function decides how big non-immediate constants are when no
+ size was explicitly given. It also scales down the assembly-level
displacement in an @(d:2,ERn) operand. */
static void
-fix_operand_size (operand, size)
- struct h8_op *operand;
- int size;
+fix_operand_size (struct h8_op *operand, int size)
{
- if ((operand->mode & MODE) == DISP)
+ if (SXmode && (operand->mode & MODE) == DISP)
{
/* If the user didn't specify an operand width, see if we
can use @(d:2,ERn). */
- if (SXmode
- && (operand->mode & SIZE) == 0
+ if ((operand->mode & SIZE) == 0
+ && operand->exp.X_add_symbol == 0
+ && operand->exp.X_op_symbol == 0
&& (operand->exp.X_add_number == size
|| operand->exp.X_add_number == size * 2
|| operand->exp.X_add_number == size * 3))
}
}
- /* If the operand needs a size but doesn't have one yet, it must be
- a 16-bit integer (see colonmod24). */
if ((operand->mode & SIZE) == 0)
switch (operand->mode & MODE)
{
case INDEXW:
case INDEXL:
case ABS:
- operand->mode |= L_16;
+ /* Pick a 24-bit address unless we know that a 16-bit address
+ is safe. get_specific() will relax L_24 into L_32 where
+ necessary. */
+ if (Hmode
+ && !Nmode
+ && ((((addressT) operand->exp.X_add_number + 0x8000)
+ & 0xffffffff) > 0xffff
+ || operand->exp.X_add_symbol != 0
+ || operand->exp.X_op_symbol != 0))
+ operand->mode |= L_24;
+ else
+ operand->mode |= L_16;
+ break;
+
+ case PCREL:
+ if ((((addressT) operand->exp.X_add_number + 0x80)
+ & 0xffffffff) <= 0xff)
+ {
+ if (operand->exp.X_add_symbol != NULL)
+ operand->mode |= bsize;
+ else
+ operand->mode |= L_8;
+ }
+ else
+ operand->mode |= L_16;
break;
}
}
the frags/bytes it assembles. */
void
-md_assemble (str)
- char *str;
+md_assemble (char *str)
{
char *op_start;
char *op_end;
const struct h8_instruction *prev_instruction;
char *dot = 0;
+ char *slash = 0;
char c;
int size, i;
op_end += 2;
break;
}
+ else if (*op_end == '/' && ! slash)
+ slash = op_end;
}
if (op_end == op_start)
*op_end = 0;
+ /* The assembler stops scanning the opcode at slashes, so it fails
+ to make characters following them lower case. Fix them. */
+ if (slash)
+ while (*++slash)
+ *slash = TOLOWER (*slash);
+
instruction = (const struct h8_instruction *)
hash_find (opcode_hash_control, op_start);
*op_end = c;
prev_instruction = instruction;
+ /* Now we have operands from instruction.
+ Let's check them out for ldm and stm. */
+ if (OP_KIND (instruction->opcode->how) == O_LDM)
+ {
+ /* The first operand must be @er7+, and the
+ second operand must be a register pair. */
+ if ((operand[0].mode != RSINC)
+ || (operand[0].reg != 7)
+ || ((operand[1].reg & 0x80000000) == 0))
+ as_bad (_("invalid operand in ldm"));
+ }
+ else if (OP_KIND (instruction->opcode->how) == O_STM)
+ {
+ /* The first operand must be a register pair,
+ and the second operand must be @-er7. */
+ if (((operand[0].reg & 0x80000000) == 0)
+ || (operand[1].mode != RDDEC)
+ || (operand[1].reg != 7))
+ as_bad (_("invalid operand in stm"));
+ }
+
size = SN;
if (dot)
{
- switch (*dot)
+ switch (TOLOWER (*dot))
{
case 'b':
size = SB;
build_bytes (instruction, operand);
-#ifdef BFD_ASSEMBLER
dwarf2_emit_insn (instruction->length);
-#endif
}
-#ifndef BFD_ASSEMBLER
-void
-tc_crawl_symbol_chain (headers)
- object_headers *headers ATTRIBUTE_UNUSED;
-{
- printf (_("call to tc_crawl_symbol_chain \n"));
-}
-#endif
-
symbolS *
-md_undefined_symbol (name)
- char *name ATTRIBUTE_UNUSED;
+md_undefined_symbol (char *name ATTRIBUTE_UNUSED)
{
return 0;
}
-#ifndef BFD_ASSEMBLER
-void
-tc_headers_hook (headers)
- object_headers *headers ATTRIBUTE_UNUSED;
-{
- printf (_("call to tc_headers_hook \n"));
-}
-#endif
-
-/* Various routines to kill one day */
-/* Equal to MAX_PRECISION in atof-ieee.c */
-#define MAX_LITTLENUMS 6
-
-/* Turn a string in input_line_pointer into a floating point constant
- of type TYPE, and store the appropriate bytes in *LITP. The number
- of LITTLENUMS emitted is stored in *SIZEP. An error message is
- returned, or NULL on OK. */
+/* Various routines to kill one day. */
char *
-md_atof (type, litP, sizeP)
- char type;
- char *litP;
- int *sizeP;
+md_atof (int type, char *litP, int *sizeP)
{
- int prec;
- LITTLENUM_TYPE words[MAX_LITTLENUMS];
- LITTLENUM_TYPE *wordP;
- char *t;
-
- switch (type)
- {
- case 'f':
- case 'F':
- case 's':
- case 'S':
- prec = 2;
- break;
-
- case 'd':
- case 'D':
- case 'r':
- case 'R':
- prec = 4;
- break;
-
- case 'x':
- case 'X':
- prec = 6;
- break;
-
- case 'p':
- case 'P':
- prec = 6;
- break;
-
- default:
- *sizeP = 0;
- return _("Bad call to MD_ATOF()");
- }
- t = atof_ieee (input_line_pointer, type, words);
- if (t)
- input_line_pointer = t;
-
- *sizeP = prec * sizeof (LITTLENUM_TYPE);
- for (wordP = words; prec--;)
- {
- md_number_to_chars (litP, (long) (*wordP++), sizeof (LITTLENUM_TYPE));
- litP += sizeof (LITTLENUM_TYPE);
- }
- return 0;
+ return ieee_md_atof (type, litP, sizeP, TRUE);
}
\f
+#define OPTION_H_TICK_HEX (OPTION_MD_BASE)
+
const char *md_shortopts = "";
struct option md_longopts[] = {
+ { "h-tick-hex", no_argument, NULL, OPTION_H_TICK_HEX },
{NULL, no_argument, NULL, 0}
};
size_t md_longopts_size = sizeof (md_longopts);
int
-md_parse_option (c, arg)
- int c ATTRIBUTE_UNUSED;
- char *arg ATTRIBUTE_UNUSED;
+md_parse_option (int c ATTRIBUTE_UNUSED, char *arg ATTRIBUTE_UNUSED)
{
- return 0;
+ switch (c)
+ {
+ case OPTION_H_TICK_HEX:
+ enable_h_tick_hex = 1;
+ break;
+
+ default:
+ return 0;
+ }
+ return 1;
}
void
-md_show_usage (stream)
- FILE *stream ATTRIBUTE_UNUSED;
+md_show_usage (FILE *stream ATTRIBUTE_UNUSED)
{
}
\f
-void tc_aout_fix_to_chars PARAMS ((void));
+void tc_aout_fix_to_chars (void);
void
-tc_aout_fix_to_chars ()
+tc_aout_fix_to_chars (void)
{
printf (_("call to tc_aout_fix_to_chars \n"));
abort ();
}
void
-md_convert_frag (headers, seg, fragP)
-#ifdef BFD_ASSEMBLER
- bfd *headers ATTRIBUTE_UNUSED;
-#else
- object_headers *headers ATTRIBUTE_UNUSED;
-#endif
- segT seg ATTRIBUTE_UNUSED;
- fragS *fragP ATTRIBUTE_UNUSED;
+md_convert_frag (bfd *headers ATTRIBUTE_UNUSED,
+ segT seg ATTRIBUTE_UNUSED,
+ fragS *fragP ATTRIBUTE_UNUSED)
{
printf (_("call to md_convert_frag \n"));
abort ();
}
-#ifdef BFD_ASSEMBLER
valueT
-md_section_align (segment, size)
- segT segment;
- valueT size;
+md_section_align (segT segment, valueT size)
{
int align = bfd_get_section_alignment (stdoutput, segment);
return ((size + (1 << align) - 1) & (-1 << align));
}
-#else
-valueT
-md_section_align (seg, size)
- segT seg;
- valueT size;
-{
- return ((size + (1 << section_alignment[(int) seg]) - 1)
- & (-1 << section_alignment[(int) seg]));
-}
-#endif
-
void
-md_apply_fix3 (fixP, valP, seg)
- fixS *fixP;
- valueT *valP;
- segT seg ATTRIBUTE_UNUSED;
+md_apply_fix (fixS *fixP, valueT *valP, segT seg ATTRIBUTE_UNUSED)
{
char *buf = fixP->fx_where + fixP->fx_frag->fr_literal;
long val = *valP;
*buf++ = (val >> 8);
*buf++ = val;
break;
+ case 8:
+ /* This can arise when the .quad or .8byte pseudo-ops are used.
+ Returning here (without setting fx_done) will cause the code
+ to attempt to generate a reloc which will then fail with the
+ slightly more helpful error message: "Cannot represent
+ relocation type BFD_RELOC_64". */
+ return;
default:
abort ();
}
}
int
-md_estimate_size_before_relax (fragP, segment_type)
- register fragS *fragP ATTRIBUTE_UNUSED;
- register segT segment_type ATTRIBUTE_UNUSED;
+md_estimate_size_before_relax (fragS *fragP ATTRIBUTE_UNUSED,
+ segT segment_type ATTRIBUTE_UNUSED)
{
- printf (_("call tomd_estimate_size_before_relax \n"));
+ printf (_("call to md_estimate_size_before_relax \n"));
abort ();
}
/* Put number into target byte order. */
void
-md_number_to_chars (ptr, use, nbytes)
- char *ptr;
- valueT use;
- int nbytes;
+md_number_to_chars (char *ptr, valueT use, int nbytes)
{
number_to_chars_bigendian (ptr, use, nbytes);
}
long
-md_pcrel_from (fixP)
- fixS *fixP ATTRIBUTE_UNUSED;
+md_pcrel_from (fixS *fixp)
{
- abort ();
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("Unexpected reference to a symbol in a non-code section"));
+ return 0;
}
-#ifndef BFD_ASSEMBLER
-void
-tc_reloc_mangle (fix_ptr, intr, base)
- fixS *fix_ptr;
- struct internal_reloc *intr;
- bfd_vma base;
-
-{
- symbolS *symbol_ptr;
-
- symbol_ptr = fix_ptr->fx_addsy;
-
- /* If this relocation is attached to a symbol then it's ok
- to output it. */
- if (fix_ptr->fx_r_type == TC_CONS_RELOC)
- {
- /* cons likes to create reloc32's whatever the size of the reloc..
- */
- switch (fix_ptr->fx_size)
- {
- case 4:
- intr->r_type = R_RELLONG;
- break;
- case 2:
- intr->r_type = R_RELWORD;
- break;
- case 1:
- intr->r_type = R_RELBYTE;
- break;
- default:
- abort ();
- }
- }
- else
- {
- intr->r_type = fix_ptr->fx_r_type;
- }
-
- intr->r_vaddr = fix_ptr->fx_frag->fr_address + fix_ptr->fx_where + base;
- intr->r_offset = fix_ptr->fx_offset;
-
- if (symbol_ptr)
- {
- if (symbol_ptr->sy_number != -1)
- intr->r_symndx = symbol_ptr->sy_number;
- else
- {
- symbolS *segsym;
-
- /* This case arises when a reference is made to `.'. */
- segsym = seg_info (S_GET_SEGMENT (symbol_ptr))->dot;
- if (segsym == NULL)
- intr->r_symndx = -1;
- else
- {
- intr->r_symndx = segsym->sy_number;
- intr->r_offset += S_GET_VALUE (symbol_ptr);
- }
- }
- }
- else
- intr->r_symndx = -1;
-}
-#else /* BFD_ASSEMBLER */
arelent *
-tc_gen_reloc (section, fixp)
- asection *section ATTRIBUTE_UNUSED;
- fixS *fixp;
+tc_gen_reloc (asection *section ATTRIBUTE_UNUSED, fixS *fixp)
{
arelent *rel;
bfd_reloc_code_real_type r_type;
|| S_GET_SEGMENT (fixp->fx_addsy) == undefined_section)
{
as_bad_where (fixp->fx_file, fixp->fx_line,
- "Difference of symbols in different sections is not supported");
+ _("Difference of symbols in different sections is not supported"));
return NULL;
}
}
- rel = (arelent *) xmalloc (sizeof (arelent));
- rel->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
+ rel = xmalloc (sizeof (arelent));
+ rel->sym_ptr_ptr = xmalloc (sizeof (asymbol *));
*rel->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
rel->address = fixp->fx_frag->fr_address + fixp->fx_where;
rel->addend = fixp->fx_offset;
#define DEBUG 0
#if DEBUG
fprintf (stderr, "%s\n", bfd_get_reloc_code_name (r_type));
- fflush(stderr);
+ fflush (stderr);
#endif
rel->howto = bfd_reloc_type_lookup (stdoutput, r_type);
if (rel->howto == NULL)
return rel;
}
-#endif