-/* i386.c -- Assemble code for the Intel 80386
+/* tc-i386.c -- Assemble code for the Intel 80386
Copyright 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002, 2003, 2004, 2005
+ 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ the Free Software Foundation; either version 3, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
#include "subsegs.h"
#include "dwarf2dbg.h"
#include "dw2gencfi.h"
-#include "opcode/i386.h"
#include "elf/x86-64.h"
+#include "opcodes/i386-init.h"
#ifndef REGISTER_WARNINGS
#define REGISTER_WARNINGS 1
#define INFER_ADDR_PREFIX 1
#endif
-#ifndef SCALE1_WHEN_NO_INDEX
-/* Specifying a scale factor besides 1 when there is no index is
- futile. eg. `mov (%ebx,2),%al' does exactly the same as
- `mov (%ebx),%al'. To slavishly follow what the programmer
- specified, set SCALE1_WHEN_NO_INDEX to 0. */
-#define SCALE1_WHEN_NO_INDEX 1
-#endif
-
#ifndef DEFAULT_ARCH
#define DEFAULT_ARCH "i386"
#endif
#endif
#endif
-static INLINE unsigned int mode_from_disp_size PARAMS ((unsigned int));
-static INLINE int fits_in_signed_byte PARAMS ((offsetT));
-static INLINE int fits_in_unsigned_byte PARAMS ((offsetT));
-static INLINE int fits_in_unsigned_word PARAMS ((offsetT));
-static INLINE int fits_in_signed_word PARAMS ((offsetT));
-static INLINE int fits_in_unsigned_long PARAMS ((offsetT));
-static INLINE int fits_in_signed_long PARAMS ((offsetT));
-static int smallest_imm_type PARAMS ((offsetT));
-static offsetT offset_in_range PARAMS ((offsetT, int));
-static int add_prefix PARAMS ((unsigned int));
-static void set_code_flag PARAMS ((int));
-static void set_16bit_gcc_code_flag PARAMS ((int));
-static void set_intel_syntax PARAMS ((int));
-static void set_cpu_arch PARAMS ((int));
+/* Prefixes will be emitted in the order defined below.
+ WAIT_PREFIX must be the first prefix since FWAIT is really is an
+ instruction, and so must come before any prefixes.
+ The preferred prefix order is SEG_PREFIX, ADDR_PREFIX, DATA_PREFIX,
+ LOCKREP_PREFIX. */
+#define WAIT_PREFIX 0
+#define SEG_PREFIX 1
+#define ADDR_PREFIX 2
+#define DATA_PREFIX 3
+#define LOCKREP_PREFIX 4
+#define REX_PREFIX 5 /* must come last. */
+#define MAX_PREFIXES 6 /* max prefixes per opcode */
+
+/* we define the syntax here (modulo base,index,scale syntax) */
+#define REGISTER_PREFIX '%'
+#define IMMEDIATE_PREFIX '$'
+#define ABSOLUTE_PREFIX '*'
+
+/* these are the instruction mnemonic suffixes in AT&T syntax or
+ memory operand size in Intel syntax. */
+#define WORD_MNEM_SUFFIX 'w'
+#define BYTE_MNEM_SUFFIX 'b'
+#define SHORT_MNEM_SUFFIX 's'
+#define LONG_MNEM_SUFFIX 'l'
+#define QWORD_MNEM_SUFFIX 'q'
+#define XMMWORD_MNEM_SUFFIX 'x'
+#define YMMWORD_MNEM_SUFFIX 'y'
+/* Intel Syntax. Use a non-ascii letter since since it never appears
+ in instructions. */
+#define LONG_DOUBLE_MNEM_SUFFIX '\1'
+
+#define END_OF_INSN '\0'
+
+/*
+ 'templates' is for grouping together 'template' structures for opcodes
+ of the same name. This is only used for storing the insns in the grand
+ ole hash table of insns.
+ The templates themselves start at START and range up to (but not including)
+ END.
+ */
+typedef struct
+{
+ const template *start;
+ const template *end;
+}
+templates;
+
+/* 386 operand encoding bytes: see 386 book for details of this. */
+typedef struct
+{
+ unsigned int regmem; /* codes register or memory operand */
+ unsigned int reg; /* codes register operand (or extended opcode) */
+ unsigned int mode; /* how to interpret regmem & reg */
+}
+modrm_byte;
+
+/* x86-64 extension prefix. */
+typedef int rex_byte;
+
+/* 386 opcode byte to code indirect addressing. */
+typedef struct
+{
+ unsigned base;
+ unsigned index;
+ unsigned scale;
+}
+sib_byte;
+
+/* x86 arch names, types and features */
+typedef struct
+{
+ const char *name; /* arch name */
+ enum processor_type type; /* arch type */
+ i386_cpu_flags flags; /* cpu feature flags */
+}
+arch_entry;
+
+static void set_code_flag (int);
+static void set_16bit_gcc_code_flag (int);
+static void set_intel_syntax (int);
+static void set_intel_mnemonic (int);
+static void set_allow_index_reg (int);
+static void set_sse_check (int);
+static void set_cpu_arch (int);
#ifdef TE_PE
-static void pe_directive_secrel PARAMS ((int));
+static void pe_directive_secrel (int);
#endif
-static char *output_invalid PARAMS ((int c));
-static int i386_operand PARAMS ((char *operand_string));
-static int i386_intel_operand PARAMS ((char *operand_string, int got_a_float));
-static const reg_entry *parse_register PARAMS ((char *reg_string,
- char **end_op));
-static char *parse_insn PARAMS ((char *, char *));
-static char *parse_operands PARAMS ((char *, const char *));
-static void swap_operands PARAMS ((void));
-static void optimize_imm PARAMS ((void));
-static void optimize_disp PARAMS ((void));
-static int match_template PARAMS ((void));
-static int check_string PARAMS ((void));
-static int process_suffix PARAMS ((void));
-static int check_byte_reg PARAMS ((void));
-static int check_long_reg PARAMS ((void));
-static int check_qword_reg PARAMS ((void));
-static int check_word_reg PARAMS ((void));
-static int finalize_imm PARAMS ((void));
-static int process_operands PARAMS ((void));
-static const seg_entry *build_modrm_byte PARAMS ((void));
-static void output_insn PARAMS ((void));
-static void output_branch PARAMS ((void));
-static void output_jump PARAMS ((void));
-static void output_interseg_jump PARAMS ((void));
-static void output_imm PARAMS ((fragS *insn_start_frag,
- offsetT insn_start_off));
-static void output_disp PARAMS ((fragS *insn_start_frag,
- offsetT insn_start_off));
+static void signed_cons (int);
+static char *output_invalid (int c);
+static int i386_finalize_immediate (segT, expressionS *, i386_operand_type,
+ const char *);
+static int i386_finalize_displacement (segT, expressionS *, i386_operand_type,
+ const char *);
+static int i386_att_operand (char *);
+static int i386_intel_operand (char *, int);
+static int i386_intel_simplify (expressionS *);
+static int i386_intel_parse_name (const char *, expressionS *);
+static const reg_entry *parse_register (char *, char **);
+static char *parse_insn (char *, char *);
+static char *parse_operands (char *, const char *);
+static void swap_operands (void);
+static void swap_2_operands (int, int);
+static void optimize_imm (void);
+static void optimize_disp (void);
+static const template *match_template (void);
+static int check_string (void);
+static int process_suffix (void);
+static int check_byte_reg (void);
+static int check_long_reg (void);
+static int check_qword_reg (void);
+static int check_word_reg (void);
+static int finalize_imm (void);
+static int process_operands (void);
+static const seg_entry *build_modrm_byte (void);
+static void output_insn (void);
+static void output_imm (fragS *, offsetT);
+static void output_disp (fragS *, offsetT);
#ifndef I386COFF
-static void s_bss PARAMS ((int));
+static void s_bss (int);
#endif
#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
static void handle_large_common (int small ATTRIBUTE_UNUSED);
static const char *default_arch = DEFAULT_ARCH;
+/* VEX prefix. */
+typedef struct
+{
+ /* VEX prefix is either 2 byte or 3 byte. */
+ unsigned char bytes[3];
+ unsigned int length;
+ /* Destination or source register specifier. */
+ const reg_entry *register_specifier;
+} vex_prefix;
+
/* 'md_assemble ()' gathers together information and puts it into a
i386_insn. */
/* TM holds the template for the insn were currently assembling. */
template tm;
- /* SUFFIX holds the instruction mnemonic suffix if given.
- (e.g. 'l' for 'movl') */
+ /* SUFFIX holds the instruction size suffix for byte, word, dword
+ or qword, if given. */
char suffix;
/* OPERANDS gives the number of given operands. */
/* TYPES [i] is the type (see above #defines) which tells us how to
use OP[i] for the corresponding operand. */
- unsigned int types[MAX_OPERANDS];
+ i386_operand_type types[MAX_OPERANDS];
/* Displacement expression, immediate expression, or register for each
operand. */
/* RM and SIB are the modrm byte and the sib byte where the
addressing modes of this insn are encoded. */
-
modrm_byte rm;
rex_byte rex;
sib_byte sib;
+ vex_prefix vex;
+
+ /* Swap operand in encoding. */
+ unsigned int swap_operand : 1;
};
typedef struct _i386_insn i386_insn;
#if (defined (TE_I386AIX) \
|| ((defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)) \
+ && !defined (TE_GNU) \
&& !defined (TE_LINUX) \
&& !defined (TE_NETWARE) \
&& !defined (TE_FreeBSD) \
&& !defined (TE_NetBSD)))
/* This array holds the chars that always start a comment. If the
- pre-processor is disabled, these aren't very useful. */
-const char comment_chars[] = "#/";
+ pre-processor is disabled, these aren't very useful. The option
+ --divide will remove '/' from this list. */
+const char *i386_comment_chars = "#/";
+#define SVR4_COMMENT_CHARS 1
#define PREFIX_SEPARATOR '\\'
+#else
+const char *i386_comment_chars = "#";
+#define PREFIX_SEPARATOR '/'
+#endif
+
/* This array holds the chars that only start a comment at the beginning of
a line. If the line seems to have the form '# 123 filename'
.line and .file directives will appear in the pre-processed output.
#NO_APP at the beginning of its output.
Also note that comments started like this one will always work if
'/' isn't otherwise defined. */
-const char line_comment_chars[] = "#";
-
-#else
-/* Putting '/' here makes it impossible to use the divide operator.
- However, we need it for compatibility with SVR4 systems. */
-const char comment_chars[] = "#";
-#define PREFIX_SEPARATOR '/'
-
-const char line_comment_chars[] = "/#";
-#endif
+const char line_comment_chars[] = "#/";
const char line_separator_chars[] = ";";
/* Possible templates for current insn. */
static const templates *current_templates;
-/* Per instruction expressionS buffers: 2 displacements & 2 immediate max. */
-static expressionS disp_expressions[2], im_expressions[2];
+/* Per instruction expressionS buffers: max displacements & immediates. */
+static expressionS disp_expressions[MAX_MEMORY_OPERANDS];
+static expressionS im_expressions[MAX_IMMEDIATE_OPERANDS];
/* Current operand we are working on. */
-static int this_operand;
+static int this_operand = -1;
/* We support four different modes. FLAG_CODE variable is used to distinguish
these. */
CODE_32BIT,
CODE_16BIT,
CODE_64BIT };
-#define NUM_FLAG_CODE ((int) CODE_64BIT + 1)
static enum flag_code flag_code;
static unsigned int object_64bit;
0 if att syntax. */
static int intel_syntax = 0;
+/* 1 for intel mnemonic,
+ 0 if att mnemonic. */
+static int intel_mnemonic = !SYSV386_COMPAT;
+
+/* 1 if support old (<= 2.8.1) versions of gcc. */
+static int old_gcc = OLDGCC_COMPAT;
+
+/* 1 if pseudo registers are permitted. */
+static int allow_pseudo_reg = 0;
+
/* 1 if register prefix % not required. */
static int allow_naked_reg = 0;
+/* 1 if pseudo index register, eiz/riz, is allowed . */
+static int allow_index_reg = 0;
+
+static enum
+ {
+ sse_check_none = 0,
+ sse_check_warning,
+ sse_check_error
+ }
+sse_check;
+
+/* Register prefix used for error message. */
+static const char *register_prefix = "%";
+
/* Used in 16 bit gcc mode to add an l suffix to call, ret, enter,
leave, push, and pop instructions so that gcc has the same stack
frame as in 32 bit mode. */
/* CPU name. */
static const char *cpu_arch_name = NULL;
-static const char *cpu_sub_arch_name = NULL;
+static char *cpu_sub_arch_name = NULL;
/* CPU feature flags. */
-static unsigned int cpu_arch_flags = CpuUnknownFlags | CpuNo64;
+static i386_cpu_flags cpu_arch_flags = CPU_UNKNOWN_FLAGS;
+
+/* If we have selected a cpu we are generating instructions for. */
+static int cpu_arch_tune_set = 0;
+
+/* Cpu we are generating instructions for. */
+enum processor_type cpu_arch_tune = PROCESSOR_UNKNOWN;
+
+/* CPU feature flags of cpu we are generating instructions for. */
+static i386_cpu_flags cpu_arch_tune_flags;
+
+/* CPU instruction set architecture used. */
+enum processor_type cpu_arch_isa = PROCESSOR_UNKNOWN;
+
+/* CPU feature flags of instruction set architecture used. */
+i386_cpu_flags cpu_arch_isa_flags;
/* If set, conditional jumps are not automatically promoted to handle
larger than a byte offset. */
static unsigned int no_cond_jump_promotion = 0;
+/* Encode SSE instructions with VEX prefix. */
+static unsigned int sse2avx;
+
/* Pre-defined "_GLOBAL_OFFSET_TABLE_". */
static symbolS *GOT_symbol;
{0, 0, 4, 0}
};
-static const arch_entry cpu_arch[] = {
- {"i8086", Cpu086 },
- {"i186", Cpu086|Cpu186 },
- {"i286", Cpu086|Cpu186|Cpu286 },
- {"i386", Cpu086|Cpu186|Cpu286|Cpu386 },
- {"i486", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486 },
- {"i586", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586 },
- {"i686", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686 },
- {"pentium", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586 },
- {"pentiumpro",Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686 },
- {"pentiumii", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuMMX },
- {"pentiumiii",Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuMMX|CpuMMX2|CpuSSE },
- {"pentium4", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuP4|CpuMMX|CpuMMX2|CpuSSE|CpuSSE2 },
- {"prescott", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuP4|CpuMMX|CpuMMX2|CpuSSE|CpuSSE2|CpuPNI },
- {"k6", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|CpuK6|CpuMMX },
- {"k6_2", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|CpuK6|CpuMMX|Cpu3dnow },
- {"athlon", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuK6|CpuAthlon|CpuMMX|CpuMMX2|Cpu3dnow|Cpu3dnowA },
- {"sledgehammer",Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuK6|CpuAthlon|CpuSledgehammer|CpuMMX|CpuMMX2|Cpu3dnow|Cpu3dnowA|CpuSSE|CpuSSE2 },
- {"opteron", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuK6|CpuAthlon|CpuSledgehammer|CpuMMX|CpuMMX2|Cpu3dnow|Cpu3dnowA|CpuSSE|CpuSSE2 },
- {".mmx", CpuMMX },
- {".sse", CpuMMX|CpuMMX2|CpuSSE },
- {".sse2", CpuMMX|CpuMMX2|CpuSSE|CpuSSE2 },
- {".sse3", CpuMMX|CpuMMX2|CpuSSE|CpuSSE2|CpuSSE3 },
- {".3dnow", CpuMMX|Cpu3dnow },
- {".3dnowa", CpuMMX|CpuMMX2|Cpu3dnow|Cpu3dnowA },
- {".padlock", CpuPadLock },
- {".pacifica", CpuSVME },
- {".svme", CpuSVME },
- {NULL, 0 }
+static const arch_entry cpu_arch[] =
+{
+ { "generic32", PROCESSOR_GENERIC32,
+ CPU_GENERIC32_FLAGS },
+ { "generic64", PROCESSOR_GENERIC64,
+ CPU_GENERIC64_FLAGS },
+ { "i8086", PROCESSOR_UNKNOWN,
+ CPU_NONE_FLAGS },
+ { "i186", PROCESSOR_UNKNOWN,
+ CPU_I186_FLAGS },
+ { "i286", PROCESSOR_UNKNOWN,
+ CPU_I286_FLAGS },
+ { "i386", PROCESSOR_I386,
+ CPU_I386_FLAGS },
+ { "i486", PROCESSOR_I486,
+ CPU_I486_FLAGS },
+ { "i586", PROCESSOR_PENTIUM,
+ CPU_I586_FLAGS },
+ { "i686", PROCESSOR_PENTIUMPRO,
+ CPU_I686_FLAGS },
+ { "pentium", PROCESSOR_PENTIUM,
+ CPU_I586_FLAGS },
+ { "pentiumpro", PROCESSOR_PENTIUMPRO,
+ CPU_I686_FLAGS },
+ { "pentiumii", PROCESSOR_PENTIUMPRO,
+ CPU_P2_FLAGS },
+ { "pentiumiii",PROCESSOR_PENTIUMPRO,
+ CPU_P3_FLAGS },
+ { "pentium4", PROCESSOR_PENTIUM4,
+ CPU_P4_FLAGS },
+ { "prescott", PROCESSOR_NOCONA,
+ CPU_CORE_FLAGS },
+ { "nocona", PROCESSOR_NOCONA,
+ CPU_NOCONA_FLAGS },
+ { "yonah", PROCESSOR_CORE,
+ CPU_CORE_FLAGS },
+ { "core", PROCESSOR_CORE,
+ CPU_CORE_FLAGS },
+ { "merom", PROCESSOR_CORE2,
+ CPU_CORE2_FLAGS },
+ { "core2", PROCESSOR_CORE2,
+ CPU_CORE2_FLAGS },
+ { "corei7", PROCESSOR_COREI7,
+ CPU_COREI7_FLAGS },
+ { "k6", PROCESSOR_K6,
+ CPU_K6_FLAGS },
+ { "k6_2", PROCESSOR_K6,
+ CPU_K6_2_FLAGS },
+ { "athlon", PROCESSOR_ATHLON,
+ CPU_ATHLON_FLAGS },
+ { "sledgehammer", PROCESSOR_K8,
+ CPU_K8_FLAGS },
+ { "opteron", PROCESSOR_K8,
+ CPU_K8_FLAGS },
+ { "k8", PROCESSOR_K8,
+ CPU_K8_FLAGS },
+ { "amdfam10", PROCESSOR_AMDFAM10,
+ CPU_AMDFAM10_FLAGS },
+ { ".mmx", PROCESSOR_UNKNOWN,
+ CPU_MMX_FLAGS },
+ { ".sse", PROCESSOR_UNKNOWN,
+ CPU_SSE_FLAGS },
+ { ".sse2", PROCESSOR_UNKNOWN,
+ CPU_SSE2_FLAGS },
+ { ".sse3", PROCESSOR_UNKNOWN,
+ CPU_SSE3_FLAGS },
+ { ".ssse3", PROCESSOR_UNKNOWN,
+ CPU_SSSE3_FLAGS },
+ { ".sse4.1", PROCESSOR_UNKNOWN,
+ CPU_SSE4_1_FLAGS },
+ { ".sse4.2", PROCESSOR_UNKNOWN,
+ CPU_SSE4_2_FLAGS },
+ { ".sse4", PROCESSOR_UNKNOWN,
+ CPU_SSE4_2_FLAGS },
+ { ".avx", PROCESSOR_UNKNOWN,
+ CPU_AVX_FLAGS },
+ { ".vmx", PROCESSOR_UNKNOWN,
+ CPU_VMX_FLAGS },
+ { ".smx", PROCESSOR_UNKNOWN,
+ CPU_SMX_FLAGS },
+ { ".xsave", PROCESSOR_UNKNOWN,
+ CPU_XSAVE_FLAGS },
+ { ".aes", PROCESSOR_UNKNOWN,
+ CPU_AES_FLAGS },
+ { ".pclmul", PROCESSOR_UNKNOWN,
+ CPU_PCLMUL_FLAGS },
+ { ".clmul", PROCESSOR_UNKNOWN,
+ CPU_PCLMUL_FLAGS },
+ { ".fma", PROCESSOR_UNKNOWN,
+ CPU_FMA_FLAGS },
+ { ".movbe", PROCESSOR_UNKNOWN,
+ CPU_MOVBE_FLAGS },
+ { ".ept", PROCESSOR_UNKNOWN,
+ CPU_EPT_FLAGS },
+ { ".clflush", PROCESSOR_UNKNOWN,
+ CPU_CLFLUSH_FLAGS },
+ { ".syscall", PROCESSOR_UNKNOWN,
+ CPU_SYSCALL_FLAGS },
+ { ".rdtscp", PROCESSOR_UNKNOWN,
+ CPU_RDTSCP_FLAGS },
+ { ".3dnow", PROCESSOR_UNKNOWN,
+ CPU_3DNOW_FLAGS },
+ { ".3dnowa", PROCESSOR_UNKNOWN,
+ CPU_3DNOWA_FLAGS },
+ { ".padlock", PROCESSOR_UNKNOWN,
+ CPU_PADLOCK_FLAGS },
+ { ".pacifica", PROCESSOR_UNKNOWN,
+ CPU_SVME_FLAGS },
+ { ".svme", PROCESSOR_UNKNOWN,
+ CPU_SVME_FLAGS },
+ { ".sse4a", PROCESSOR_UNKNOWN,
+ CPU_SSE4A_FLAGS },
+ { ".abm", PROCESSOR_UNKNOWN,
+ CPU_ABM_FLAGS },
};
+#ifdef I386COFF
+/* Like s_lcomm_internal in gas/read.c but the alignment string
+ is allowed to be optional. */
+
+static symbolS *
+pe_lcomm_internal (int needs_align, symbolS *symbolP, addressT size)
+{
+ addressT align = 0;
+
+ SKIP_WHITESPACE ();
+
+ if (needs_align
+ && *input_line_pointer == ',')
+ {
+ align = parse_align (needs_align - 1);
+
+ if (align == (addressT) -1)
+ return NULL;
+ }
+ else
+ {
+ if (size >= 8)
+ align = 3;
+ else if (size >= 4)
+ align = 2;
+ else if (size >= 2)
+ align = 1;
+ else
+ align = 0;
+ }
+
+ bss_alloc (symbolP, size, align);
+ return symbolP;
+}
+
+static void
+pe_lcomm (int needs_align)
+{
+ s_comm_internal (needs_align * 2, pe_lcomm_internal);
+}
+#endif
+
const pseudo_typeS md_pseudo_table[] =
{
#if !defined(OBJ_AOUT) && !defined(USE_ALIGN_PTWO)
{"arch", set_cpu_arch, 0},
#ifndef I386COFF
{"bss", s_bss, 0},
+#else
+ {"lcomm", pe_lcomm, 1},
#endif
{"ffloat", float_cons, 'f'},
{"dfloat", float_cons, 'd'},
{"tfloat", float_cons, 'x'},
{"value", cons, 2},
+ {"slong", signed_cons, 4},
{"noopt", s_ignore, 0},
{"optim", s_ignore, 0},
{"code16gcc", set_16bit_gcc_code_flag, CODE_16BIT},
{"code64", set_code_flag, CODE_64BIT},
{"intel_syntax", set_intel_syntax, 1},
{"att_syntax", set_intel_syntax, 0},
- {"file", (void (*) PARAMS ((int))) dwarf2_directive_file, 0},
- {"loc", dwarf2_directive_loc, 0},
+ {"intel_mnemonic", set_intel_mnemonic, 1},
+ {"att_mnemonic", set_intel_mnemonic, 0},
+ {"allow_index_reg", set_allow_index_reg, 1},
+ {"disallow_index_reg", set_allow_index_reg, 0},
+ {"sse_check", set_sse_check, 0},
#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
{"largecomm", handle_large_common, 0},
+#else
+ {"file", (void (*) (int)) dwarf2_directive_file, 0},
+ {"loc", dwarf2_directive_loc, 0},
+ {"loc_mark_labels", dwarf2_directive_loc_mark_labels, 0},
#endif
#ifdef TE_PE
{"secrel32", pe_directive_secrel, 0},
static struct hash_control *reg_hash;
\f
void
-i386_align_code (fragP, count)
- fragS *fragP;
- int count;
+i386_align_code (fragS *fragP, int count)
{
/* Various efficient no-op patterns for aligning code labels.
Note: Don't try to assemble the instructions in the comments.
static const char f32_1[] =
{0x90}; /* nop */
static const char f32_2[] =
- {0x89,0xf6}; /* movl %esi,%esi */
+ {0x66,0x90}; /* xchg %ax,%ax */
static const char f32_3[] =
{0x8d,0x76,0x00}; /* leal 0(%esi),%esi */
static const char f32_4[] =
static const char f32_14[] =
{0x8d,0xb4,0x26,0x00,0x00,0x00,0x00, /* leal 0L(%esi,1),%esi */
0x8d,0xbc,0x27,0x00,0x00,0x00,0x00}; /* leal 0L(%edi,1),%edi */
- static const char f32_15[] =
- {0xeb,0x0d,0x90,0x90,0x90,0x90,0x90, /* jmp .+15; lotsa nops */
- 0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90};
static const char f16_3[] =
{0x8d,0x74,0x00}; /* lea 0(%esi),%esi */
static const char f16_4[] =
static const char f16_8[] =
{0x8d,0xb4,0x00,0x00, /* lea 0w(%si),%si */
0x8d,0xbd,0x00,0x00}; /* lea 0w(%di),%di */
+ static const char jump_31[] =
+ {0xeb,0x1d,0x90,0x90,0x90,0x90,0x90, /* jmp .+31; lotsa nops */
+ 0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,
+ 0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,
+ 0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90};
static const char *const f32_patt[] = {
f32_1, f32_2, f32_3, f32_4, f32_5, f32_6, f32_7, f32_8,
- f32_9, f32_10, f32_11, f32_12, f32_13, f32_14, f32_15
+ f32_9, f32_10, f32_11, f32_12, f32_13, f32_14
};
static const char *const f16_patt[] = {
- f32_1, f32_2, f16_3, f16_4, f16_5, f16_6, f16_7, f16_8,
- f32_15, f32_15, f32_15, f32_15, f32_15, f32_15, f32_15
+ f32_1, f32_2, f16_3, f16_4, f16_5, f16_6, f16_7, f16_8
+ };
+ /* nopl (%[re]ax) */
+ static const char alt_3[] =
+ {0x0f,0x1f,0x00};
+ /* nopl 0(%[re]ax) */
+ static const char alt_4[] =
+ {0x0f,0x1f,0x40,0x00};
+ /* nopl 0(%[re]ax,%[re]ax,1) */
+ static const char alt_5[] =
+ {0x0f,0x1f,0x44,0x00,0x00};
+ /* nopw 0(%[re]ax,%[re]ax,1) */
+ static const char alt_6[] =
+ {0x66,0x0f,0x1f,0x44,0x00,0x00};
+ /* nopl 0L(%[re]ax) */
+ static const char alt_7[] =
+ {0x0f,0x1f,0x80,0x00,0x00,0x00,0x00};
+ /* nopl 0L(%[re]ax,%[re]ax,1) */
+ static const char alt_8[] =
+ {0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
+ /* nopw 0L(%[re]ax,%[re]ax,1) */
+ static const char alt_9[] =
+ {0x66,0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
+ /* nopw %cs:0L(%[re]ax,%[re]ax,1) */
+ static const char alt_10[] =
+ {0x66,0x2e,0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
+ /* data16
+ nopw %cs:0L(%[re]ax,%[re]ax,1) */
+ static const char alt_long_11[] =
+ {0x66,
+ 0x66,0x2e,0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
+ /* data16
+ data16
+ nopw %cs:0L(%[re]ax,%[re]ax,1) */
+ static const char alt_long_12[] =
+ {0x66,
+ 0x66,
+ 0x66,0x2e,0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
+ /* data16
+ data16
+ data16
+ nopw %cs:0L(%[re]ax,%[re]ax,1) */
+ static const char alt_long_13[] =
+ {0x66,
+ 0x66,
+ 0x66,
+ 0x66,0x2e,0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
+ /* data16
+ data16
+ data16
+ data16
+ nopw %cs:0L(%[re]ax,%[re]ax,1) */
+ static const char alt_long_14[] =
+ {0x66,
+ 0x66,
+ 0x66,
+ 0x66,
+ 0x66,0x2e,0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
+ /* data16
+ data16
+ data16
+ data16
+ data16
+ nopw %cs:0L(%[re]ax,%[re]ax,1) */
+ static const char alt_long_15[] =
+ {0x66,
+ 0x66,
+ 0x66,
+ 0x66,
+ 0x66,
+ 0x66,0x2e,0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
+ /* nopl 0(%[re]ax,%[re]ax,1)
+ nopw 0(%[re]ax,%[re]ax,1) */
+ static const char alt_short_11[] =
+ {0x0f,0x1f,0x44,0x00,0x00,
+ 0x66,0x0f,0x1f,0x44,0x00,0x00};
+ /* nopw 0(%[re]ax,%[re]ax,1)
+ nopw 0(%[re]ax,%[re]ax,1) */
+ static const char alt_short_12[] =
+ {0x66,0x0f,0x1f,0x44,0x00,0x00,
+ 0x66,0x0f,0x1f,0x44,0x00,0x00};
+ /* nopw 0(%[re]ax,%[re]ax,1)
+ nopl 0L(%[re]ax) */
+ static const char alt_short_13[] =
+ {0x66,0x0f,0x1f,0x44,0x00,0x00,
+ 0x0f,0x1f,0x80,0x00,0x00,0x00,0x00};
+ /* nopl 0L(%[re]ax)
+ nopl 0L(%[re]ax) */
+ static const char alt_short_14[] =
+ {0x0f,0x1f,0x80,0x00,0x00,0x00,0x00,
+ 0x0f,0x1f,0x80,0x00,0x00,0x00,0x00};
+ /* nopl 0L(%[re]ax)
+ nopl 0L(%[re]ax,%[re]ax,1) */
+ static const char alt_short_15[] =
+ {0x0f,0x1f,0x80,0x00,0x00,0x00,0x00,
+ 0x0f,0x1f,0x84,0x00,0x00,0x00,0x00,0x00};
+ static const char *const alt_short_patt[] = {
+ f32_1, f32_2, alt_3, alt_4, alt_5, alt_6, alt_7, alt_8,
+ alt_9, alt_10, alt_short_11, alt_short_12, alt_short_13,
+ alt_short_14, alt_short_15
+ };
+ static const char *const alt_long_patt[] = {
+ f32_1, f32_2, alt_3, alt_4, alt_5, alt_6, alt_7, alt_8,
+ alt_9, alt_10, alt_long_11, alt_long_12, alt_long_13,
+ alt_long_14, alt_long_15
};
- if (count <= 0 || count > 15)
+ /* Only align for at least a positive non-zero boundary. */
+ if (count <= 0 || count > MAX_MEM_FOR_RS_ALIGN_CODE)
return;
- /* The recommended way to pad 64bit code is to use NOPs preceded by
- maximally four 0x66 prefixes. Balance the size of nops. */
- if (flag_code == CODE_64BIT)
+ /* We need to decide which NOP sequence to use for 32bit and
+ 64bit. When -mtune= is used:
+
+ 1. For PROCESSOR_I386, PROCESSOR_I486, PROCESSOR_PENTIUM and
+ PROCESSOR_GENERIC32, f32_patt will be used.
+ 2. For PROCESSOR_PENTIUMPRO, PROCESSOR_PENTIUM4, PROCESSOR_NOCONA,
+ PROCESSOR_CORE, PROCESSOR_CORE2, PROCESSOR_COREI7, and
+ PROCESSOR_GENERIC64, alt_long_patt will be used.
+ 3. For PROCESSOR_ATHLON, PROCESSOR_K6, PROCESSOR_K8 and
+ PROCESSOR_AMDFAM10, alt_short_patt will be used.
+
+ When -mtune= isn't used, alt_long_patt will be used if
+ cpu_arch_isa_flags has Cpu686. Otherwise, f32_patt will
+ be used.
+
+ When -march= or .arch is used, we can't use anything beyond
+ cpu_arch_isa_flags. */
+
+ if (flag_code == CODE_16BIT)
+ {
+ if (count > 8)
+ {
+ memcpy (fragP->fr_literal + fragP->fr_fix,
+ jump_31, count);
+ /* Adjust jump offset. */
+ fragP->fr_literal[fragP->fr_fix + 1] = count - 2;
+ }
+ else
+ memcpy (fragP->fr_literal + fragP->fr_fix,
+ f16_patt[count - 1], count);
+ }
+ else
{
- int i;
- int nnops = (count + 3) / 4;
- int len = count / nnops;
- int remains = count - nnops * len;
- int pos = 0;
+ const char *const *patt = NULL;
+
+ if (fragP->tc_frag_data.isa == PROCESSOR_UNKNOWN)
+ {
+ /* PROCESSOR_UNKNOWN means that all ISAs may be used. */
+ switch (cpu_arch_tune)
+ {
+ case PROCESSOR_UNKNOWN:
+ /* We use cpu_arch_isa_flags to check if we SHOULD
+ optimize for Cpu686. */
+ if (fragP->tc_frag_data.isa_flags.bitfield.cpui686)
+ patt = alt_long_patt;
+ else
+ patt = f32_patt;
+ break;
+ case PROCESSOR_PENTIUMPRO:
+ case PROCESSOR_PENTIUM4:
+ case PROCESSOR_NOCONA:
+ case PROCESSOR_CORE:
+ case PROCESSOR_CORE2:
+ case PROCESSOR_COREI7:
+ case PROCESSOR_GENERIC64:
+ patt = alt_long_patt;
+ break;
+ case PROCESSOR_K6:
+ case PROCESSOR_ATHLON:
+ case PROCESSOR_K8:
+ case PROCESSOR_AMDFAM10:
+ patt = alt_short_patt;
+ break;
+ case PROCESSOR_I386:
+ case PROCESSOR_I486:
+ case PROCESSOR_PENTIUM:
+ case PROCESSOR_GENERIC32:
+ patt = f32_patt;
+ break;
+ }
+ }
+ else
+ {
+ switch (fragP->tc_frag_data.tune)
+ {
+ case PROCESSOR_UNKNOWN:
+ /* When cpu_arch_isa is set, cpu_arch_tune shouldn't be
+ PROCESSOR_UNKNOWN. */
+ abort ();
+ break;
+
+ case PROCESSOR_I386:
+ case PROCESSOR_I486:
+ case PROCESSOR_PENTIUM:
+ case PROCESSOR_K6:
+ case PROCESSOR_ATHLON:
+ case PROCESSOR_K8:
+ case PROCESSOR_AMDFAM10:
+ case PROCESSOR_GENERIC32:
+ /* We use cpu_arch_isa_flags to check if we CAN optimize
+ for Cpu686. */
+ if (fragP->tc_frag_data.isa_flags.bitfield.cpui686)
+ patt = alt_short_patt;
+ else
+ patt = f32_patt;
+ break;
+ case PROCESSOR_PENTIUMPRO:
+ case PROCESSOR_PENTIUM4:
+ case PROCESSOR_NOCONA:
+ case PROCESSOR_CORE:
+ case PROCESSOR_CORE2:
+ case PROCESSOR_COREI7:
+ if (fragP->tc_frag_data.isa_flags.bitfield.cpui686)
+ patt = alt_long_patt;
+ else
+ patt = f32_patt;
+ break;
+ case PROCESSOR_GENERIC64:
+ patt = alt_long_patt;
+ break;
+ }
+ }
- for (i = 0; i < remains; i++)
+ if (patt == f32_patt)
{
- memset (fragP->fr_literal + fragP->fr_fix + pos, 0x66, len);
- fragP->fr_literal[fragP->fr_fix + pos + len] = 0x90;
- pos += len + 1;
+ /* If the padding is less than 15 bytes, we use the normal
+ ones. Otherwise, we use a jump instruction and adjust
+ its offset. */
+ if (count < 15)
+ memcpy (fragP->fr_literal + fragP->fr_fix,
+ patt[count - 1], count);
+ else
+ {
+ memcpy (fragP->fr_literal + fragP->fr_fix,
+ jump_31, count);
+ /* Adjust jump offset. */
+ fragP->fr_literal[fragP->fr_fix + 1] = count - 2;
+ }
}
- for (; i < nnops; i++)
+ else
{
- memset (fragP->fr_literal + fragP->fr_fix + pos, 0x66, len - 1);
- fragP->fr_literal[fragP->fr_fix + pos + len - 1] = 0x90;
- pos += len;
+ /* Maximum length of an instruction is 15 byte. If the
+ padding is greater than 15 bytes and we don't use jump,
+ we have to break it into smaller pieces. */
+ int padding = count;
+ while (padding > 15)
+ {
+ padding -= 15;
+ memcpy (fragP->fr_literal + fragP->fr_fix + padding,
+ patt [14], 15);
+ }
+
+ if (padding)
+ memcpy (fragP->fr_literal + fragP->fr_fix,
+ patt [padding - 1], padding);
}
}
- else
- if (flag_code == CODE_16BIT)
- {
- memcpy (fragP->fr_literal + fragP->fr_fix,
- f16_patt[count - 1], count);
- if (count > 8)
- /* Adjust jump offset. */
- fragP->fr_literal[fragP->fr_fix + 1] = count - 2;
- }
- else
- memcpy (fragP->fr_literal + fragP->fr_fix,
- f32_patt[count - 1], count);
fragP->fr_var = count;
}
-static INLINE unsigned int
-mode_from_disp_size (t)
- unsigned int t;
+static INLINE int
+operand_type_all_zero (const union i386_operand_type *x)
{
- return (t & Disp8) ? 1 : (t & (Disp16 | Disp32 | Disp32S)) ? 2 : 0;
+ switch (ARRAY_SIZE(x->array))
+ {
+ case 3:
+ if (x->array[2])
+ return 0;
+ case 2:
+ if (x->array[1])
+ return 0;
+ case 1:
+ return !x->array[0];
+ default:
+ abort ();
+ }
}
-static INLINE int
-fits_in_signed_byte (num)
- offsetT num;
+static INLINE void
+operand_type_set (union i386_operand_type *x, unsigned int v)
{
- return (num >= -128) && (num <= 127);
+ switch (ARRAY_SIZE(x->array))
+ {
+ case 3:
+ x->array[2] = v;
+ case 2:
+ x->array[1] = v;
+ case 1:
+ x->array[0] = v;
+ break;
+ default:
+ abort ();
+ }
}
static INLINE int
-fits_in_unsigned_byte (num)
- offsetT num;
+operand_type_equal (const union i386_operand_type *x,
+ const union i386_operand_type *y)
{
- return (num & 0xff) == num;
+ switch (ARRAY_SIZE(x->array))
+ {
+ case 3:
+ if (x->array[2] != y->array[2])
+ return 0;
+ case 2:
+ if (x->array[1] != y->array[1])
+ return 0;
+ case 1:
+ return x->array[0] == y->array[0];
+ break;
+ default:
+ abort ();
+ }
}
static INLINE int
-fits_in_unsigned_word (num)
- offsetT num;
+cpu_flags_all_zero (const union i386_cpu_flags *x)
{
- return (num & 0xffff) == num;
+ switch (ARRAY_SIZE(x->array))
+ {
+ case 3:
+ if (x->array[2])
+ return 0;
+ case 2:
+ if (x->array[1])
+ return 0;
+ case 1:
+ return !x->array[0];
+ default:
+ abort ();
+ }
}
-static INLINE int
-fits_in_signed_word (num)
- offsetT num;
+static INLINE void
+cpu_flags_set (union i386_cpu_flags *x, unsigned int v)
{
- return (-32768 <= num) && (num <= 32767);
+ switch (ARRAY_SIZE(x->array))
+ {
+ case 3:
+ x->array[2] = v;
+ case 2:
+ x->array[1] = v;
+ case 1:
+ x->array[0] = v;
+ break;
+ default:
+ abort ();
+ }
}
+
static INLINE int
-fits_in_signed_long (num)
- offsetT num ATTRIBUTE_UNUSED;
+cpu_flags_equal (const union i386_cpu_flags *x,
+ const union i386_cpu_flags *y)
{
-#ifndef BFD64
- return 1;
-#else
- return (!(((offsetT) -1 << 31) & num)
- || (((offsetT) -1 << 31) & num) == ((offsetT) -1 << 31));
-#endif
-} /* fits_in_signed_long() */
+ switch (ARRAY_SIZE(x->array))
+ {
+ case 3:
+ if (x->array[2] != y->array[2])
+ return 0;
+ case 2:
+ if (x->array[1] != y->array[1])
+ return 0;
+ case 1:
+ return x->array[0] == y->array[0];
+ break;
+ default:
+ abort ();
+ }
+}
+
static INLINE int
-fits_in_unsigned_long (num)
- offsetT num ATTRIBUTE_UNUSED;
+cpu_flags_check_cpu64 (i386_cpu_flags f)
{
-#ifndef BFD64
- return 1;
-#else
- return (num & (((offsetT) 2 << 31) - 1)) == num;
-#endif
-} /* fits_in_unsigned_long() */
+ return !((flag_code == CODE_64BIT && f.bitfield.cpuno64)
+ || (flag_code != CODE_64BIT && f.bitfield.cpu64));
+}
-static int
-smallest_imm_type (num)
- offsetT num;
+static INLINE i386_cpu_flags
+cpu_flags_and (i386_cpu_flags x, i386_cpu_flags y)
{
- if (cpu_arch_flags != (Cpu086 | Cpu186 | Cpu286 | Cpu386 | Cpu486 | CpuNo64))
+ switch (ARRAY_SIZE (x.array))
{
- /* This code is disabled on the 486 because all the Imm1 forms
- in the opcode table are slower on the i486. They're the
- versions with the implicitly specified single-position
- displacement, which has another syntax if you really want to
- use that form. */
- if (num == 1)
- return Imm1 | Imm8 | Imm8S | Imm16 | Imm32 | Imm32S | Imm64;
- }
- return (fits_in_signed_byte (num)
- ? (Imm8S | Imm8 | Imm16 | Imm32 | Imm32S | Imm64)
- : fits_in_unsigned_byte (num)
- ? (Imm8 | Imm16 | Imm32 | Imm32S | Imm64)
- : (fits_in_signed_word (num) || fits_in_unsigned_word (num))
- ? (Imm16 | Imm32 | Imm32S | Imm64)
- : fits_in_signed_long (num)
- ? (Imm32 | Imm32S | Imm64)
- : fits_in_unsigned_long (num)
- ? (Imm32 | Imm64)
- : Imm64);
+ case 3:
+ x.array [2] &= y.array [2];
+ case 2:
+ x.array [1] &= y.array [1];
+ case 1:
+ x.array [0] &= y.array [0];
+ break;
+ default:
+ abort ();
+ }
+ return x;
}
-static offsetT
-offset_in_range (val, size)
- offsetT val;
- int size;
+static INLINE i386_cpu_flags
+cpu_flags_or (i386_cpu_flags x, i386_cpu_flags y)
{
- addressT mask;
-
- switch (size)
+ switch (ARRAY_SIZE (x.array))
{
- case 1: mask = ((addressT) 1 << 8) - 1; break;
- case 2: mask = ((addressT) 1 << 16) - 1; break;
- case 4: mask = ((addressT) 2 << 31) - 1; break;
-#ifdef BFD64
- case 8: mask = ((addressT) 2 << 63) - 1; break;
-#endif
- default: abort ();
+ case 3:
+ x.array [2] |= y.array [2];
+ case 2:
+ x.array [1] |= y.array [1];
+ case 1:
+ x.array [0] |= y.array [0];
+ break;
+ default:
+ abort ();
}
+ return x;
+}
- /* If BFD64, sign extend val. */
- if (!use_rela_relocations)
- if ((val & ~(((addressT) 2 << 31) - 1)) == 0)
- val = (val ^ ((addressT) 1 << 31)) - ((addressT) 1 << 31);
+#define CPU_FLAGS_ARCH_MATCH 0x1
+#define CPU_FLAGS_64BIT_MATCH 0x2
+#define CPU_FLAGS_AES_MATCH 0x4
+#define CPU_FLAGS_PCLMUL_MATCH 0x8
+#define CPU_FLAGS_AVX_MATCH 0x10
- if ((val & ~mask) != 0 && (val & ~mask) != ~mask)
- {
- char buf1[40], buf2[40];
+#define CPU_FLAGS_32BIT_MATCH \
+ (CPU_FLAGS_ARCH_MATCH | CPU_FLAGS_AES_MATCH \
+ | CPU_FLAGS_PCLMUL_MATCH | CPU_FLAGS_AVX_MATCH)
+#define CPU_FLAGS_PERFECT_MATCH \
+ (CPU_FLAGS_32BIT_MATCH | CPU_FLAGS_64BIT_MATCH)
- sprint_value (buf1, val);
- sprint_value (buf2, val & mask);
- as_warn (_("%s shortened to %s"), buf1, buf2);
- }
- return val & mask;
-}
+/* Return CPU flags match bits. */
-/* Returns 0 if attempting to add a prefix where one from the same
- class already exists, 1 if non rep/repne added, 2 if rep/repne
- added. */
static int
-add_prefix (prefix)
- unsigned int prefix;
+cpu_flags_match (const template *t)
{
- int ret = 1;
- int q;
-
- if (prefix >= REX_OPCODE && prefix < REX_OPCODE + 16
- && flag_code == CODE_64BIT)
- q = REX_PREFIX;
- else
- switch (prefix)
- {
- default:
- abort ();
+ i386_cpu_flags x = t->cpu_flags;
+ int match = cpu_flags_check_cpu64 (x) ? CPU_FLAGS_64BIT_MATCH : 0;
- case CS_PREFIX_OPCODE:
- case DS_PREFIX_OPCODE:
- case ES_PREFIX_OPCODE:
- case FS_PREFIX_OPCODE:
- case GS_PREFIX_OPCODE:
- case SS_PREFIX_OPCODE:
- q = SEG_PREFIX;
- break;
+ x.bitfield.cpu64 = 0;
+ x.bitfield.cpuno64 = 0;
- case REPNE_PREFIX_OPCODE:
- case REPE_PREFIX_OPCODE:
- ret = 2;
- /* fall thru */
- case LOCK_PREFIX_OPCODE:
- q = LOCKREP_PREFIX;
- break;
+ if (cpu_flags_all_zero (&x))
+ {
+ /* This instruction is available on all archs. */
+ match |= CPU_FLAGS_32BIT_MATCH;
+ }
+ else
+ {
+ /* This instruction is available only on some archs. */
+ i386_cpu_flags cpu = cpu_arch_flags;
- case FWAIT_OPCODE:
- q = WAIT_PREFIX;
- break;
+ cpu.bitfield.cpu64 = 0;
+ cpu.bitfield.cpuno64 = 0;
+ cpu = cpu_flags_and (x, cpu);
+ if (!cpu_flags_all_zero (&cpu))
+ {
+ if (x.bitfield.cpuavx)
+ {
+ /* We only need to check AES/PCLMUL/SSE2AVX with AVX. */
+ if (cpu.bitfield.cpuavx)
+ {
+ /* Check SSE2AVX. */
+ if (!t->opcode_modifier.sse2avx|| sse2avx)
+ {
+ match |= (CPU_FLAGS_ARCH_MATCH
+ | CPU_FLAGS_AVX_MATCH);
+ /* Check AES. */
+ if (!x.bitfield.cpuaes || cpu.bitfield.cpuaes)
+ match |= CPU_FLAGS_AES_MATCH;
+ /* Check PCLMUL. */
+ if (!x.bitfield.cpupclmul
+ || cpu.bitfield.cpupclmul)
+ match |= CPU_FLAGS_PCLMUL_MATCH;
+ }
+ }
+ else
+ match |= CPU_FLAGS_ARCH_MATCH;
+ }
+ else
+ match |= CPU_FLAGS_32BIT_MATCH;
+ }
+ }
+ return match;
+}
- case ADDR_PREFIX_OPCODE:
- q = ADDR_PREFIX;
- break;
+static INLINE i386_operand_type
+operand_type_and (i386_operand_type x, i386_operand_type y)
+{
+ switch (ARRAY_SIZE (x.array))
+ {
+ case 3:
+ x.array [2] &= y.array [2];
+ case 2:
+ x.array [1] &= y.array [1];
+ case 1:
+ x.array [0] &= y.array [0];
+ break;
+ default:
+ abort ();
+ }
+ return x;
+}
- case DATA_PREFIX_OPCODE:
- q = DATA_PREFIX;
- break;
- }
+static INLINE i386_operand_type
+operand_type_or (i386_operand_type x, i386_operand_type y)
+{
+ switch (ARRAY_SIZE (x.array))
+ {
+ case 3:
+ x.array [2] |= y.array [2];
+ case 2:
+ x.array [1] |= y.array [1];
+ case 1:
+ x.array [0] |= y.array [0];
+ break;
+ default:
+ abort ();
+ }
+ return x;
+}
- if (i.prefix[q] != 0)
+static INLINE i386_operand_type
+operand_type_xor (i386_operand_type x, i386_operand_type y)
+{
+ switch (ARRAY_SIZE (x.array))
{
- as_bad (_("same type of prefix used twice"));
- return 0;
+ case 3:
+ x.array [2] ^= y.array [2];
+ case 2:
+ x.array [1] ^= y.array [1];
+ case 1:
+ x.array [0] ^= y.array [0];
+ break;
+ default:
+ abort ();
+ }
+ return x;
+}
+
+static const i386_operand_type acc32 = OPERAND_TYPE_ACC32;
+static const i386_operand_type acc64 = OPERAND_TYPE_ACC64;
+static const i386_operand_type control = OPERAND_TYPE_CONTROL;
+static const i386_operand_type inoutportreg
+ = OPERAND_TYPE_INOUTPORTREG;
+static const i386_operand_type reg16_inoutportreg
+ = OPERAND_TYPE_REG16_INOUTPORTREG;
+static const i386_operand_type disp16 = OPERAND_TYPE_DISP16;
+static const i386_operand_type disp32 = OPERAND_TYPE_DISP32;
+static const i386_operand_type disp32s = OPERAND_TYPE_DISP32S;
+static const i386_operand_type disp16_32 = OPERAND_TYPE_DISP16_32;
+static const i386_operand_type anydisp
+ = OPERAND_TYPE_ANYDISP;
+static const i386_operand_type regxmm = OPERAND_TYPE_REGXMM;
+static const i386_operand_type regymm = OPERAND_TYPE_REGYMM;
+static const i386_operand_type imm8 = OPERAND_TYPE_IMM8;
+static const i386_operand_type imm8s = OPERAND_TYPE_IMM8S;
+static const i386_operand_type imm16 = OPERAND_TYPE_IMM16;
+static const i386_operand_type imm32 = OPERAND_TYPE_IMM32;
+static const i386_operand_type imm32s = OPERAND_TYPE_IMM32S;
+static const i386_operand_type imm64 = OPERAND_TYPE_IMM64;
+static const i386_operand_type imm16_32 = OPERAND_TYPE_IMM16_32;
+static const i386_operand_type imm16_32s = OPERAND_TYPE_IMM16_32S;
+static const i386_operand_type imm16_32_32s = OPERAND_TYPE_IMM16_32_32S;
+
+enum operand_type
+{
+ reg,
+ imm,
+ disp,
+ anymem
+};
+
+static INLINE int
+operand_type_check (i386_operand_type t, enum operand_type c)
+{
+ switch (c)
+ {
+ case reg:
+ return (t.bitfield.reg8
+ || t.bitfield.reg16
+ || t.bitfield.reg32
+ || t.bitfield.reg64);
+
+ case imm:
+ return (t.bitfield.imm8
+ || t.bitfield.imm8s
+ || t.bitfield.imm16
+ || t.bitfield.imm32
+ || t.bitfield.imm32s
+ || t.bitfield.imm64);
+
+ case disp:
+ return (t.bitfield.disp8
+ || t.bitfield.disp16
+ || t.bitfield.disp32
+ || t.bitfield.disp32s
+ || t.bitfield.disp64);
+
+ case anymem:
+ return (t.bitfield.disp8
+ || t.bitfield.disp16
+ || t.bitfield.disp32
+ || t.bitfield.disp32s
+ || t.bitfield.disp64
+ || t.bitfield.baseindex);
+
+ default:
+ abort ();
+ }
+
+ return 0;
+}
+
+/* Return 1 if there is no conflict in 8bit/16bit/32bit/64bit on
+ operand J for instruction template T. */
+
+static INLINE int
+match_reg_size (const template *t, unsigned int j)
+{
+ return !((i.types[j].bitfield.byte
+ && !t->operand_types[j].bitfield.byte)
+ || (i.types[j].bitfield.word
+ && !t->operand_types[j].bitfield.word)
+ || (i.types[j].bitfield.dword
+ && !t->operand_types[j].bitfield.dword)
+ || (i.types[j].bitfield.qword
+ && !t->operand_types[j].bitfield.qword));
+}
+
+/* Return 1 if there is no conflict in any size on operand J for
+ instruction template T. */
+
+static INLINE int
+match_mem_size (const template *t, unsigned int j)
+{
+ return (match_reg_size (t, j)
+ && !((i.types[j].bitfield.unspecified
+ && !t->operand_types[j].bitfield.unspecified)
+ || (i.types[j].bitfield.fword
+ && !t->operand_types[j].bitfield.fword)
+ || (i.types[j].bitfield.tbyte
+ && !t->operand_types[j].bitfield.tbyte)
+ || (i.types[j].bitfield.xmmword
+ && !t->operand_types[j].bitfield.xmmword)
+ || (i.types[j].bitfield.ymmword
+ && !t->operand_types[j].bitfield.ymmword)));
+}
+
+/* Return 1 if there is no size conflict on any operands for
+ instruction template T. */
+
+static INLINE int
+operand_size_match (const template *t)
+{
+ unsigned int j;
+ int match = 1;
+
+ /* Don't check jump instructions. */
+ if (t->opcode_modifier.jump
+ || t->opcode_modifier.jumpbyte
+ || t->opcode_modifier.jumpdword
+ || t->opcode_modifier.jumpintersegment)
+ return match;
+
+ /* Check memory and accumulator operand size. */
+ for (j = 0; j < i.operands; j++)
+ {
+ if (t->operand_types[j].bitfield.anysize)
+ continue;
+
+ if (t->operand_types[j].bitfield.acc && !match_reg_size (t, j))
+ {
+ match = 0;
+ break;
+ }
+
+ if (i.types[j].bitfield.mem && !match_mem_size (t, j))
+ {
+ match = 0;
+ break;
+ }
+ }
+
+ if (match
+ || (!t->opcode_modifier.d && !t->opcode_modifier.floatd))
+ return match;
+
+ /* Check reverse. */
+ assert (i.operands == 2);
+
+ match = 1;
+ for (j = 0; j < 2; j++)
+ {
+ if (t->operand_types[j].bitfield.acc
+ && !match_reg_size (t, j ? 0 : 1))
+ {
+ match = 0;
+ break;
+ }
+
+ if (i.types[j].bitfield.mem
+ && !match_mem_size (t, j ? 0 : 1))
+ {
+ match = 0;
+ break;
+ }
+ }
+
+ return match;
+}
+
+static INLINE int
+operand_type_match (i386_operand_type overlap,
+ i386_operand_type given)
+{
+ i386_operand_type temp = overlap;
+
+ temp.bitfield.jumpabsolute = 0;
+ temp.bitfield.unspecified = 0;
+ temp.bitfield.byte = 0;
+ temp.bitfield.word = 0;
+ temp.bitfield.dword = 0;
+ temp.bitfield.fword = 0;
+ temp.bitfield.qword = 0;
+ temp.bitfield.tbyte = 0;
+ temp.bitfield.xmmword = 0;
+ temp.bitfield.ymmword = 0;
+ if (operand_type_all_zero (&temp))
+ return 0;
+
+ return (given.bitfield.baseindex == overlap.bitfield.baseindex
+ && given.bitfield.jumpabsolute == overlap.bitfield.jumpabsolute);
+}
+
+/* If given types g0 and g1 are registers they must be of the same type
+ unless the expected operand type register overlap is null.
+ Note that Acc in a template matches every size of reg. */
+
+static INLINE int
+operand_type_register_match (i386_operand_type m0,
+ i386_operand_type g0,
+ i386_operand_type t0,
+ i386_operand_type m1,
+ i386_operand_type g1,
+ i386_operand_type t1)
+{
+ if (!operand_type_check (g0, reg))
+ return 1;
+
+ if (!operand_type_check (g1, reg))
+ return 1;
+
+ if (g0.bitfield.reg8 == g1.bitfield.reg8
+ && g0.bitfield.reg16 == g1.bitfield.reg16
+ && g0.bitfield.reg32 == g1.bitfield.reg32
+ && g0.bitfield.reg64 == g1.bitfield.reg64)
+ return 1;
+
+ if (m0.bitfield.acc)
+ {
+ t0.bitfield.reg8 = 1;
+ t0.bitfield.reg16 = 1;
+ t0.bitfield.reg32 = 1;
+ t0.bitfield.reg64 = 1;
+ }
+
+ if (m1.bitfield.acc)
+ {
+ t1.bitfield.reg8 = 1;
+ t1.bitfield.reg16 = 1;
+ t1.bitfield.reg32 = 1;
+ t1.bitfield.reg64 = 1;
+ }
+
+ return (!(t0.bitfield.reg8 & t1.bitfield.reg8)
+ && !(t0.bitfield.reg16 & t1.bitfield.reg16)
+ && !(t0.bitfield.reg32 & t1.bitfield.reg32)
+ && !(t0.bitfield.reg64 & t1.bitfield.reg64));
+}
+
+static INLINE unsigned int
+mode_from_disp_size (i386_operand_type t)
+{
+ if (t.bitfield.disp8)
+ return 1;
+ else if (t.bitfield.disp16
+ || t.bitfield.disp32
+ || t.bitfield.disp32s)
+ return 2;
+ else
+ return 0;
+}
+
+static INLINE int
+fits_in_signed_byte (offsetT num)
+{
+ return (num >= -128) && (num <= 127);
+}
+
+static INLINE int
+fits_in_unsigned_byte (offsetT num)
+{
+ return (num & 0xff) == num;
+}
+
+static INLINE int
+fits_in_unsigned_word (offsetT num)
+{
+ return (num & 0xffff) == num;
+}
+
+static INLINE int
+fits_in_signed_word (offsetT num)
+{
+ return (-32768 <= num) && (num <= 32767);
+}
+
+static INLINE int
+fits_in_signed_long (offsetT num ATTRIBUTE_UNUSED)
+{
+#ifndef BFD64
+ return 1;
+#else
+ return (!(((offsetT) -1 << 31) & num)
+ || (((offsetT) -1 << 31) & num) == ((offsetT) -1 << 31));
+#endif
+} /* fits_in_signed_long() */
+
+static INLINE int
+fits_in_unsigned_long (offsetT num ATTRIBUTE_UNUSED)
+{
+#ifndef BFD64
+ return 1;
+#else
+ return (num & (((offsetT) 2 << 31) - 1)) == num;
+#endif
+} /* fits_in_unsigned_long() */
+
+static i386_operand_type
+smallest_imm_type (offsetT num)
+{
+ i386_operand_type t;
+
+ operand_type_set (&t, 0);
+ t.bitfield.imm64 = 1;
+
+ if (cpu_arch_tune != PROCESSOR_I486 && num == 1)
+ {
+ /* This code is disabled on the 486 because all the Imm1 forms
+ in the opcode table are slower on the i486. They're the
+ versions with the implicitly specified single-position
+ displacement, which has another syntax if you really want to
+ use that form. */
+ t.bitfield.imm1 = 1;
+ t.bitfield.imm8 = 1;
+ t.bitfield.imm8s = 1;
+ t.bitfield.imm16 = 1;
+ t.bitfield.imm32 = 1;
+ t.bitfield.imm32s = 1;
+ }
+ else if (fits_in_signed_byte (num))
+ {
+ t.bitfield.imm8 = 1;
+ t.bitfield.imm8s = 1;
+ t.bitfield.imm16 = 1;
+ t.bitfield.imm32 = 1;
+ t.bitfield.imm32s = 1;
+ }
+ else if (fits_in_unsigned_byte (num))
+ {
+ t.bitfield.imm8 = 1;
+ t.bitfield.imm16 = 1;
+ t.bitfield.imm32 = 1;
+ t.bitfield.imm32s = 1;
+ }
+ else if (fits_in_signed_word (num) || fits_in_unsigned_word (num))
+ {
+ t.bitfield.imm16 = 1;
+ t.bitfield.imm32 = 1;
+ t.bitfield.imm32s = 1;
+ }
+ else if (fits_in_signed_long (num))
+ {
+ t.bitfield.imm32 = 1;
+ t.bitfield.imm32s = 1;
+ }
+ else if (fits_in_unsigned_long (num))
+ t.bitfield.imm32 = 1;
+
+ return t;
+}
+
+static offsetT
+offset_in_range (offsetT val, int size)
+{
+ addressT mask;
+
+ switch (size)
+ {
+ case 1: mask = ((addressT) 1 << 8) - 1; break;
+ case 2: mask = ((addressT) 1 << 16) - 1; break;
+ case 4: mask = ((addressT) 2 << 31) - 1; break;
+#ifdef BFD64
+ case 8: mask = ((addressT) 2 << 63) - 1; break;
+#endif
+ default: abort ();
+ }
+
+ /* If BFD64, sign extend val. */
+ if (!use_rela_relocations)
+ if ((val & ~(((addressT) 2 << 31) - 1)) == 0)
+ val = (val ^ ((addressT) 1 << 31)) - ((addressT) 1 << 31);
+
+ if ((val & ~mask) != 0 && (val & ~mask) != ~mask)
+ {
+ char buf1[40], buf2[40];
+
+ sprint_value (buf1, val);
+ sprint_value (buf2, val & mask);
+ as_warn (_("%s shortened to %s"), buf1, buf2);
+ }
+ return val & mask;
+}
+
+/* Returns 0 if attempting to add a prefix where one from the same
+ class already exists, 1 if non rep/repne added, 2 if rep/repne
+ added. */
+static int
+add_prefix (unsigned int prefix)
+{
+ int ret = 1;
+ unsigned int q;
+
+ if (prefix >= REX_OPCODE && prefix < REX_OPCODE + 16
+ && flag_code == CODE_64BIT)
+ {
+ if ((i.prefix[REX_PREFIX] & prefix & REX_W)
+ || ((i.prefix[REX_PREFIX] & (REX_R | REX_X | REX_B))
+ && (prefix & (REX_R | REX_X | REX_B))))
+ ret = 0;
+ q = REX_PREFIX;
+ }
+ else
+ {
+ switch (prefix)
+ {
+ default:
+ abort ();
+
+ case CS_PREFIX_OPCODE:
+ case DS_PREFIX_OPCODE:
+ case ES_PREFIX_OPCODE:
+ case FS_PREFIX_OPCODE:
+ case GS_PREFIX_OPCODE:
+ case SS_PREFIX_OPCODE:
+ q = SEG_PREFIX;
+ break;
+
+ case REPNE_PREFIX_OPCODE:
+ case REPE_PREFIX_OPCODE:
+ ret = 2;
+ /* fall thru */
+ case LOCK_PREFIX_OPCODE:
+ q = LOCKREP_PREFIX;
+ break;
+
+ case FWAIT_OPCODE:
+ q = WAIT_PREFIX;
+ break;
+
+ case ADDR_PREFIX_OPCODE:
+ q = ADDR_PREFIX;
+ break;
+
+ case DATA_PREFIX_OPCODE:
+ q = DATA_PREFIX;
+ break;
+ }
+ if (i.prefix[q] != 0)
+ ret = 0;
+ }
+
+ if (ret)
+ {
+ if (!i.prefix[q])
+ ++i.prefixes;
+ i.prefix[q] |= prefix;
}
+ else
+ as_bad (_("same type of prefix used twice"));
- i.prefixes += 1;
- i.prefix[q] = prefix;
return ret;
}
static void
-set_code_flag (value)
- int value;
+set_code_flag (int value)
{
flag_code = value;
- cpu_arch_flags &= ~(Cpu64 | CpuNo64);
- cpu_arch_flags |= (flag_code == CODE_64BIT ? Cpu64 : CpuNo64);
- if (value == CODE_64BIT && !(cpu_arch_flags & CpuSledgehammer))
+ if (flag_code == CODE_64BIT)
+ {
+ cpu_arch_flags.bitfield.cpu64 = 1;
+ cpu_arch_flags.bitfield.cpuno64 = 0;
+ }
+ else
+ {
+ cpu_arch_flags.bitfield.cpu64 = 0;
+ cpu_arch_flags.bitfield.cpuno64 = 1;
+ }
+ if (value == CODE_64BIT && !cpu_arch_flags.bitfield.cpulm )
{
as_bad (_("64bit mode not supported on this CPU."));
}
- if (value == CODE_32BIT && !(cpu_arch_flags & Cpu386))
+ if (value == CODE_32BIT && !cpu_arch_flags.bitfield.cpui386)
{
as_bad (_("32bit mode not supported on this CPU."));
}
}
static void
-set_16bit_gcc_code_flag (new_code_flag)
- int new_code_flag;
+set_16bit_gcc_code_flag (int new_code_flag)
{
flag_code = new_code_flag;
- cpu_arch_flags &= ~(Cpu64 | CpuNo64);
- cpu_arch_flags |= (flag_code == CODE_64BIT ? Cpu64 : CpuNo64);
+ if (flag_code != CODE_16BIT)
+ abort ();
+ cpu_arch_flags.bitfield.cpu64 = 0;
+ cpu_arch_flags.bitfield.cpuno64 = 1;
stackop_size = LONG_MNEM_SUFFIX;
}
static void
-set_intel_syntax (syntax_flag)
- int syntax_flag;
+set_intel_syntax (int syntax_flag)
{
/* Find out if register prefixing is specified. */
int ask_naked_reg = 0;
else
allow_naked_reg = (ask_naked_reg < 0);
+ expr_set_rank (O_full_ptr, syntax_flag ? 10 : 0);
+
identifier_chars['%'] = intel_syntax && allow_naked_reg ? '%' : 0;
identifier_chars['$'] = intel_syntax ? '$' : 0;
+ register_prefix = allow_naked_reg ? "" : "%";
}
static void
-set_cpu_arch (dummy)
- int dummy ATTRIBUTE_UNUSED;
+set_intel_mnemonic (int mnemonic_flag)
+{
+ intel_mnemonic = mnemonic_flag;
+}
+
+static void
+set_allow_index_reg (int flag)
+{
+ allow_index_reg = flag;
+}
+
+static void
+set_sse_check (int dummy ATTRIBUTE_UNUSED)
+{
+ SKIP_WHITESPACE ();
+
+ if (!is_end_of_line[(unsigned char) *input_line_pointer])
+ {
+ char *string = input_line_pointer;
+ int e = get_symbol_end ();
+
+ if (strcmp (string, "none") == 0)
+ sse_check = sse_check_none;
+ else if (strcmp (string, "warning") == 0)
+ sse_check = sse_check_warning;
+ else if (strcmp (string, "error") == 0)
+ sse_check = sse_check_error;
+ else
+ as_bad (_("bad argument to sse_check directive."));
+ *input_line_pointer = e;
+ }
+ else
+ as_bad (_("missing argument for sse_check directive"));
+
+ demand_empty_rest_of_line ();
+}
+
+static void
+set_cpu_arch (int dummy ATTRIBUTE_UNUSED)
{
SKIP_WHITESPACE ();
{
char *string = input_line_pointer;
int e = get_symbol_end ();
- int i;
+ unsigned int i;
+ i386_cpu_flags flags;
- for (i = 0; cpu_arch[i].name; i++)
+ for (i = 0; i < ARRAY_SIZE (cpu_arch); i++)
{
if (strcmp (string, cpu_arch[i].name) == 0)
{
{
cpu_arch_name = cpu_arch[i].name;
cpu_sub_arch_name = NULL;
- cpu_arch_flags = (cpu_arch[i].flags
- | (flag_code == CODE_64BIT ? Cpu64 : CpuNo64));
+ cpu_arch_flags = cpu_arch[i].flags;
+ if (flag_code == CODE_64BIT)
+ {
+ cpu_arch_flags.bitfield.cpu64 = 1;
+ cpu_arch_flags.bitfield.cpuno64 = 0;
+ }
+ else
+ {
+ cpu_arch_flags.bitfield.cpu64 = 0;
+ cpu_arch_flags.bitfield.cpuno64 = 1;
+ }
+ cpu_arch_isa = cpu_arch[i].type;
+ cpu_arch_isa_flags = cpu_arch[i].flags;
+ if (!cpu_arch_tune_set)
+ {
+ cpu_arch_tune = cpu_arch_isa;
+ cpu_arch_tune_flags = cpu_arch_isa_flags;
+ }
break;
}
- if ((cpu_arch_flags | cpu_arch[i].flags) != cpu_arch_flags)
+
+ flags = cpu_flags_or (cpu_arch_flags,
+ cpu_arch[i].flags);
+ if (!cpu_flags_equal (&flags, &cpu_arch_flags))
{
- cpu_sub_arch_name = cpu_arch[i].name;
- cpu_arch_flags |= cpu_arch[i].flags;
+ if (cpu_sub_arch_name)
+ {
+ char *name = cpu_sub_arch_name;
+ cpu_sub_arch_name = concat (name,
+ cpu_arch[i].name,
+ (const char *) NULL);
+ free (name);
+ }
+ else
+ cpu_sub_arch_name = xstrdup (cpu_arch[i].name);
+ cpu_arch_flags = flags;
}
*input_line_pointer = e;
demand_empty_rest_of_line ();
return;
}
}
- if (!cpu_arch[i].name)
+ if (i >= ARRAY_SIZE (cpu_arch))
as_bad (_("no such architecture: `%s'"), string);
*input_line_pointer = e;
core_optab->end = optab;
hash_err = hash_insert (op_hash,
(optab - 1)->name,
- (PTR) core_optab);
+ (void *) core_optab);
if (hash_err)
{
as_fatal (_("Internal Error: Can't hash %s: %s"),
reg_hash = hash_new ();
{
const reg_entry *regtab;
+ unsigned int regtab_size = i386_regtab_size;
- for (regtab = i386_regtab;
- regtab < i386_regtab + sizeof (i386_regtab) / sizeof (i386_regtab[0]);
- regtab++)
+ for (regtab = i386_regtab; regtab_size--; regtab++)
{
- hash_err = hash_insert (reg_hash, regtab->reg_name, (PTR) regtab);
+ hash_err = hash_insert (reg_hash, regtab->reg_name, (void *) regtab);
if (hash_err)
as_fatal (_("Internal Error: Can't hash %s: %s"),
regtab->reg_name,
operand_chars['?'] = '?';
#endif
digit_chars['-'] = '-';
+ mnemonic_chars['_'] = '_';
mnemonic_chars['-'] = '-';
+ mnemonic_chars['.'] = '.';
identifier_chars['_'] = '_';
identifier_chars['.'] = '.';
}
void
-i386_print_statistics (file)
- FILE *file;
+i386_print_statistics (FILE *file)
{
hash_print_statistics (file, "i386 opcode", op_hash);
hash_print_statistics (file, "i386 register", reg_hash);
#ifdef DEBUG386
/* Debugging routines for md_assemble. */
-static void pi PARAMS ((char *, i386_insn *));
-static void pte PARAMS ((template *));
-static void pt PARAMS ((unsigned int));
-static void pe PARAMS ((expressionS *));
-static void ps PARAMS ((symbolS *));
+static void pte (template *);
+static void pt (i386_operand_type);
+static void pe (expressionS *);
+static void ps (symbolS *);
static void
-pi (line, x)
- char *line;
- i386_insn *x;
+pi (char *line, i386_insn *x)
{
unsigned int i;
fprintf (stdout, " sib: base %x index %x scale %x\n",
x->sib.base, x->sib.index, x->sib.scale);
fprintf (stdout, " rex: 64bit %x extX %x extY %x extZ %x\n",
- (x->rex & REX_MODE64) != 0,
- (x->rex & REX_EXTX) != 0,
- (x->rex & REX_EXTY) != 0,
- (x->rex & REX_EXTZ) != 0);
+ (x->rex & REX_W) != 0,
+ (x->rex & REX_R) != 0,
+ (x->rex & REX_X) != 0,
+ (x->rex & REX_B) != 0);
for (i = 0; i < x->operands; i++)
{
fprintf (stdout, " #%d: ", i + 1);
pt (x->types[i]);
fprintf (stdout, "\n");
- if (x->types[i]
- & (Reg | SReg2 | SReg3 | Control | Debug | Test | RegMMX | RegXMM))
+ if (x->types[i].bitfield.reg8
+ || x->types[i].bitfield.reg16
+ || x->types[i].bitfield.reg32
+ || x->types[i].bitfield.reg64
+ || x->types[i].bitfield.regmmx
+ || x->types[i].bitfield.regxmm
+ || x->types[i].bitfield.regymm
+ || x->types[i].bitfield.sreg2
+ || x->types[i].bitfield.sreg3
+ || x->types[i].bitfield.control
+ || x->types[i].bitfield.debug
+ || x->types[i].bitfield.test)
fprintf (stdout, "%s\n", x->op[i].regs->reg_name);
- if (x->types[i] & Imm)
+ if (operand_type_check (x->types[i], imm))
pe (x->op[i].imms);
- if (x->types[i] & Disp)
+ if (operand_type_check (x->types[i], disp))
pe (x->op[i].disps);
}
}
static void
-pte (t)
- template *t;
+pte (template *t)
{
unsigned int i;
fprintf (stdout, " %d operands ", t->operands);
fprintf (stdout, "opcode %x ", t->base_opcode);
if (t->extension_opcode != None)
fprintf (stdout, "ext %x ", t->extension_opcode);
- if (t->opcode_modifier & D)
+ if (t->opcode_modifier.d)
fprintf (stdout, "D");
- if (t->opcode_modifier & W)
+ if (t->opcode_modifier.w)
fprintf (stdout, "W");
fprintf (stdout, "\n");
for (i = 0; i < t->operands; i++)
}
static void
-pe (e)
- expressionS *e;
+pe (expressionS *e)
{
fprintf (stdout, " operation %d\n", e->X_op);
fprintf (stdout, " add_number %ld (%lx)\n",
}
static void
-ps (s)
- symbolS *s;
+ps (symbolS *s)
{
fprintf (stdout, "%s type %s%s",
S_GET_NAME (s),
segment_name (S_GET_SEGMENT (s)));
}
-struct type_name
+static struct type_name
{
- unsigned int mask;
- char *tname;
+ i386_operand_type mask;
+ const char *name;
}
-
-static const type_names[] =
-{
- { Reg8, "r8" },
- { Reg16, "r16" },
- { Reg32, "r32" },
- { Reg64, "r64" },
- { Imm8, "i8" },
- { Imm8S, "i8s" },
- { Imm16, "i16" },
- { Imm32, "i32" },
- { Imm32S, "i32s" },
- { Imm64, "i64" },
- { Imm1, "i1" },
- { BaseIndex, "BaseIndex" },
- { Disp8, "d8" },
- { Disp16, "d16" },
- { Disp32, "d32" },
- { Disp32S, "d32s" },
- { Disp64, "d64" },
- { InOutPortReg, "InOutPortReg" },
- { ShiftCount, "ShiftCount" },
- { Control, "control reg" },
- { Test, "test reg" },
- { Debug, "debug reg" },
- { FloatReg, "FReg" },
- { FloatAcc, "FAcc" },
- { SReg2, "SReg2" },
- { SReg3, "SReg3" },
- { Acc, "Acc" },
- { JumpAbsolute, "Jump Absolute" },
- { RegMMX, "rMMX" },
- { RegXMM, "rXMM" },
- { EsSeg, "es" },
- { 0, "" }
+const type_names[] =
+{
+ { OPERAND_TYPE_REG8, "r8" },
+ { OPERAND_TYPE_REG16, "r16" },
+ { OPERAND_TYPE_REG32, "r32" },
+ { OPERAND_TYPE_REG64, "r64" },
+ { OPERAND_TYPE_IMM8, "i8" },
+ { OPERAND_TYPE_IMM8, "i8s" },
+ { OPERAND_TYPE_IMM16, "i16" },
+ { OPERAND_TYPE_IMM32, "i32" },
+ { OPERAND_TYPE_IMM32S, "i32s" },
+ { OPERAND_TYPE_IMM64, "i64" },
+ { OPERAND_TYPE_IMM1, "i1" },
+ { OPERAND_TYPE_BASEINDEX, "BaseIndex" },
+ { OPERAND_TYPE_DISP8, "d8" },
+ { OPERAND_TYPE_DISP16, "d16" },
+ { OPERAND_TYPE_DISP32, "d32" },
+ { OPERAND_TYPE_DISP32S, "d32s" },
+ { OPERAND_TYPE_DISP64, "d64" },
+ { OPERAND_TYPE_INOUTPORTREG, "InOutPortReg" },
+ { OPERAND_TYPE_SHIFTCOUNT, "ShiftCount" },
+ { OPERAND_TYPE_CONTROL, "control reg" },
+ { OPERAND_TYPE_TEST, "test reg" },
+ { OPERAND_TYPE_DEBUG, "debug reg" },
+ { OPERAND_TYPE_FLOATREG, "FReg" },
+ { OPERAND_TYPE_FLOATACC, "FAcc" },
+ { OPERAND_TYPE_SREG2, "SReg2" },
+ { OPERAND_TYPE_SREG3, "SReg3" },
+ { OPERAND_TYPE_ACC, "Acc" },
+ { OPERAND_TYPE_JUMPABSOLUTE, "Jump Absolute" },
+ { OPERAND_TYPE_REGMMX, "rMMX" },
+ { OPERAND_TYPE_REGXMM, "rXMM" },
+ { OPERAND_TYPE_REGYMM, "rYMM" },
+ { OPERAND_TYPE_ESSEG, "es" },
};
static void
-pt (t)
- unsigned int t;
+pt (i386_operand_type t)
{
- const struct type_name *ty;
+ unsigned int j;
+ i386_operand_type a;
- for (ty = type_names; ty->mask; ty++)
- if (t & ty->mask)
- fprintf (stdout, "%s, ", ty->tname);
+ for (j = 0; j < ARRAY_SIZE (type_names); j++)
+ {
+ a = operand_type_and (t, type_names[j].mask);
+ if (!operand_type_all_zero (&a))
+ fprintf (stdout, "%s, ", type_names[j].name);
+ }
fflush (stdout);
}
\f
static bfd_reloc_code_real_type
reloc (unsigned int size,
- int pcrel,
- int sign,
- bfd_reloc_code_real_type other)
+ int pcrel,
+ int sign,
+ bfd_reloc_code_real_type other)
{
if (other != NO_RELOC)
{
if (size == 8)
switch (other)
{
- case BFD_RELOC_X86_64_TPOFF32:
- other = BFD_RELOC_X86_64_TPOFF64;
- break;
- case BFD_RELOC_X86_64_DTPOFF32:
- other = BFD_RELOC_X86_64_DTPOFF64;
- break;
- default:
- break;
+ case BFD_RELOC_X86_64_GOT32:
+ return BFD_RELOC_X86_64_GOT64;
+ break;
+ case BFD_RELOC_X86_64_PLTOFF64:
+ return BFD_RELOC_X86_64_PLTOFF64;
+ break;
+ case BFD_RELOC_X86_64_GOTPC32:
+ other = BFD_RELOC_X86_64_GOTPC64;
+ break;
+ case BFD_RELOC_X86_64_GOTPCREL:
+ other = BFD_RELOC_X86_64_GOTPCREL64;
+ break;
+ case BFD_RELOC_X86_64_TPOFF32:
+ other = BFD_RELOC_X86_64_TPOFF64;
+ break;
+ case BFD_RELOC_X86_64_DTPOFF32:
+ other = BFD_RELOC_X86_64_DTPOFF64;
+ break;
+ default:
+ break;
}
+
+ /* Sign-checking 4-byte relocations in 16-/32-bit code is pointless. */
+ if (size == 4 && flag_code != CODE_64BIT)
+ sign = -1;
+
reloc = bfd_reloc_type_lookup (stdoutput, other);
if (!reloc)
as_bad (_("unknown relocation (%u)"), other);
else if ((reloc->complain_on_overflow == complain_overflow_signed
&& !sign)
|| (reloc->complain_on_overflow == complain_overflow_unsigned
- && sign > 0))
+ && sign > 0))
as_bad (_("relocated field and relocation type differ in signedness"));
else
return other;
sign > 0 ? "signed" : "unsigned", size);
}
- abort ();
- return BFD_RELOC_NONE;
+ return NO_RELOC;
}
/* Here we decide which fixups can be adjusted to make them relative to
some cases we force the original symbol to be used. */
int
-tc_i386_fix_adjustable (fixP)
- fixS *fixP ATTRIBUTE_UNUSED;
+tc_i386_fix_adjustable (fixS *fixP ATTRIBUTE_UNUSED)
{
#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
if (!IS_ELF)
|| fixP->fx_r_type == BFD_RELOC_386_TLS_GOTIE
|| fixP->fx_r_type == BFD_RELOC_386_TLS_LE_32
|| fixP->fx_r_type == BFD_RELOC_386_TLS_LE
+ || fixP->fx_r_type == BFD_RELOC_386_TLS_GOTDESC
+ || fixP->fx_r_type == BFD_RELOC_386_TLS_DESC_CALL
|| fixP->fx_r_type == BFD_RELOC_X86_64_PLT32
|| fixP->fx_r_type == BFD_RELOC_X86_64_GOT32
|| fixP->fx_r_type == BFD_RELOC_X86_64_GOTPCREL
|| fixP->fx_r_type == BFD_RELOC_X86_64_TPOFF32
|| fixP->fx_r_type == BFD_RELOC_X86_64_TPOFF64
|| fixP->fx_r_type == BFD_RELOC_X86_64_GOTOFF64
+ || fixP->fx_r_type == BFD_RELOC_X86_64_GOTPC32_TLSDESC
+ || fixP->fx_r_type == BFD_RELOC_X86_64_TLSDESC_CALL
|| fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
|| fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
return 0;
+
+ if (fixP->fx_addsy != NULL
+ && symbol_get_bfdsym (fixP->fx_addsy)->flags & BSF_GNU_INDIRECT_FUNCTION)
+ return 0;
#endif
return 1;
}
-static int intel_float_operand PARAMS ((const char *mnemonic));
-
static int
-intel_float_operand (mnemonic)
- const char *mnemonic;
+intel_float_operand (const char *mnemonic)
{
/* Note that the value returned is meaningful only for opcodes with (memory)
operands, hence the code here is free to improperly handle opcodes that
return 1;
}
+/* Build the VEX prefix. */
+
+static void
+build_vex_prefix (const template *t)
+{
+ unsigned int register_specifier;
+ unsigned int implied_prefix;
+ unsigned int vector_length;
+
+ /* Check register specifier. */
+ if (i.vex.register_specifier)
+ {
+ register_specifier = i.vex.register_specifier->reg_num;
+ if ((i.vex.register_specifier->reg_flags & RegRex))
+ register_specifier += 8;
+ register_specifier = ~register_specifier & 0xf;
+ }
+ else
+ register_specifier = 0xf;
+
+ /* Use 2-byte VEX prefix by swappping destination and source
+ operand. */
+ if (!i.swap_operand
+ && i.operands == i.reg_operands
+ && i.tm.opcode_modifier.vex0f
+ && i.tm.opcode_modifier.s
+ && i.rex == REX_B)
+ {
+ unsigned int xchg = i.operands - 1;
+ union i386_op temp_op;
+ i386_operand_type temp_type;
+
+ temp_type = i.types[xchg];
+ i.types[xchg] = i.types[0];
+ i.types[0] = temp_type;
+ temp_op = i.op[xchg];
+ i.op[xchg] = i.op[0];
+ i.op[0] = temp_op;
+
+ assert (i.rm.mode == 3);
+
+ i.rex = REX_R;
+ xchg = i.rm.regmem;
+ i.rm.regmem = i.rm.reg;
+ i.rm.reg = xchg;
+
+ /* Use the next insn. */
+ i.tm = t[1];
+ }
+
+ vector_length = i.tm.opcode_modifier.vex256 ? 1 : 0;
+
+ switch ((i.tm.base_opcode >> 8) & 0xff)
+ {
+ case 0:
+ implied_prefix = 0;
+ break;
+ case DATA_PREFIX_OPCODE:
+ implied_prefix = 1;
+ break;
+ case REPE_PREFIX_OPCODE:
+ implied_prefix = 2;
+ break;
+ case REPNE_PREFIX_OPCODE:
+ implied_prefix = 3;
+ break;
+ default:
+ abort ();
+ }
+
+ /* Use 2-byte VEX prefix if possible. */
+ if (i.tm.opcode_modifier.vex0f
+ && (i.rex & (REX_W | REX_X | REX_B)) == 0)
+ {
+ /* 2-byte VEX prefix. */
+ unsigned int r;
+
+ i.vex.length = 2;
+ i.vex.bytes[0] = 0xc5;
+
+ /* Check the REX.R bit. */
+ r = (i.rex & REX_R) ? 0 : 1;
+ i.vex.bytes[1] = (r << 7
+ | register_specifier << 3
+ | vector_length << 2
+ | implied_prefix);
+ }
+ else
+ {
+ /* 3-byte VEX prefix. */
+ unsigned int m, w;
+
+ if (i.tm.opcode_modifier.vex0f)
+ m = 0x1;
+ else if (i.tm.opcode_modifier.vex0f38)
+ m = 0x2;
+ else if (i.tm.opcode_modifier.vex0f3a)
+ m = 0x3;
+ else
+ abort ();
+
+ i.vex.length = 3;
+ i.vex.bytes[0] = 0xc4;
+
+ /* The high 3 bits of the second VEX byte are 1's compliment
+ of RXB bits from REX. */
+ i.vex.bytes[1] = (~i.rex & 0x7) << 5 | m;
+
+ /* Check the REX.W bit. */
+ w = (i.rex & REX_W) ? 1 : 0;
+ if (i.tm.opcode_modifier.vexw0 || i.tm.opcode_modifier.vexw1)
+ {
+ if (w)
+ abort ();
+
+ if (i.tm.opcode_modifier.vexw1)
+ w = 1;
+ }
+
+ i.vex.bytes[2] = (w << 7
+ | register_specifier << 3
+ | vector_length << 2
+ | implied_prefix);
+ }
+}
+
+static void
+process_immext (void)
+{
+ expressionS *exp;
+
+ if (i.tm.cpu_flags.bitfield.cpusse3 && i.operands > 0)
+ {
+ /* SSE3 Instructions have the fixed operands with an opcode
+ suffix which is coded in the same place as an 8-bit immediate
+ field would be. Here we check those operands and remove them
+ afterwards. */
+ unsigned int x;
+
+ for (x = 0; x < i.operands; x++)
+ if (i.op[x].regs->reg_num != x)
+ as_bad (_("can't use register '%s%s' as operand %d in '%s'."),
+ register_prefix, i.op[x].regs->reg_name, x + 1,
+ i.tm.name);
+
+ i.operands = 0;
+ }
+
+ /* These AMD 3DNow! and SSE2 instructions have an opcode suffix
+ which is coded in the same place as an 8-bit immediate field
+ would be. Here we fake an 8-bit immediate operand from the
+ opcode suffix stored in tm.extension_opcode.
+
+ AVX instructions also use this encoding, for some of
+ 3 argument instructions. */
+
+ assert (i.imm_operands == 0
+ && (i.operands <= 2
+ || (i.tm.opcode_modifier.vex
+ && i.operands <= 4)));
+
+ exp = &im_expressions[i.imm_operands++];
+ i.op[i.operands].imms = exp;
+ i.types[i.operands] = imm8;
+ i.operands++;
+ exp->X_op = O_constant;
+ exp->X_add_number = i.tm.extension_opcode;
+ i.tm.extension_opcode = None;
+}
+
/* This is the guts of the machine-dependent assembler. LINE points to a
machine dependent instruction. This function is supposed to emit
the frags/bytes it assembles to. */
void
-md_assemble (line)
- char *line;
+md_assemble (char *line)
{
- int j;
+ unsigned int j;
char mnemonic[MAX_MNEM_SIZE];
+ const template *t;
/* Initialize globals. */
memset (&i, '\0', sizeof (i));
return;
line = parse_operands (line, mnemonic);
+ this_operand = -1;
if (line == NULL)
return;
/* All intel opcodes have reversed operands except for "bound" and
"enter". We also don't reverse intersegment "jmp" and "call"
instructions with 2 immediate operands so that the immediate segment
- precedes the offset, as it does when in AT&T mode. "enter" and the
- intersegment "jmp" and "call" instructions are the only ones that
- have two immediate operands. */
- if (intel_syntax && i.operands > 1
+ precedes the offset, as it does when in AT&T mode. */
+ if (intel_syntax
+ && i.operands > 1
&& (strcmp (mnemonic, "bound") != 0)
&& (strcmp (mnemonic, "invlpga") != 0)
- && !((i.types[0] & Imm) && (i.types[1] & Imm)))
+ && !(operand_type_check (i.types[0], imm)
+ && operand_type_check (i.types[1], imm)))
swap_operands ();
+ /* The order of the immediates should be reversed
+ for 2 immediates extrq and insertq instructions */
+ if (i.imm_operands == 2
+ && (strcmp (mnemonic, "extrq") == 0
+ || strcmp (mnemonic, "insertq") == 0))
+ swap_2_operands (0, 1);
+
if (i.imm_operands)
optimize_imm ();
making sure the overlap of the given operands types is consistent
with the template operand types. */
- if (!match_template ())
+ if (!(t = match_template ()))
return;
- if (intel_syntax)
+ if (sse_check != sse_check_none
+ && !i.tm.opcode_modifier.noavx
+ && (i.tm.cpu_flags.bitfield.cpusse
+ || i.tm.cpu_flags.bitfield.cpusse2
+ || i.tm.cpu_flags.bitfield.cpusse3
+ || i.tm.cpu_flags.bitfield.cpussse3
+ || i.tm.cpu_flags.bitfield.cpusse4_1
+ || i.tm.cpu_flags.bitfield.cpusse4_2))
{
- /* Undo SYSV386_COMPAT brokenness when in Intel mode. See i386.h */
- if (SYSV386_COMPAT
- && (i.tm.base_opcode & 0xfffffde0) == 0xdce0)
- i.tm.base_opcode ^= FloatR;
+ (sse_check == sse_check_warning
+ ? as_warn
+ : as_bad) (_("SSE instruction `%s' is used"), i.tm.name);
+ }
- /* Zap movzx and movsx suffix. The suffix may have been set from
- "word ptr" or "byte ptr" on the source operand, but we'll use
- the suffix later to choose the destination register. */
- if ((i.tm.base_opcode & ~9) == 0x0fb6)
- {
- if (i.reg_operands < 2
- && !i.suffix
- && (~i.tm.opcode_modifier
- & (No_bSuf
- | No_wSuf
- | No_lSuf
- | No_sSuf
- | No_xSuf
- | No_qSuf)))
- as_bad (_("ambiguous operand size for `%s'"), i.tm.name);
-
- i.suffix = 0;
- }
+ /* Zap movzx and movsx suffix. The suffix has been set from
+ "word ptr" or "byte ptr" on the source operand in Intel syntax
+ or extracted from mnemonic in AT&T syntax. But we'll use
+ the destination register to choose the suffix for encoding. */
+ if ((i.tm.base_opcode & ~9) == 0x0fb6)
+ {
+ /* In Intel syntax, there must be a suffix. In AT&T syntax, if
+ there is no suffix, the default will be byte extension. */
+ if (i.reg_operands != 2
+ && !i.suffix
+ && intel_syntax)
+ as_bad (_("ambiguous operand size for `%s'"), i.tm.name);
+
+ i.suffix = 0;
}
- if (i.tm.opcode_modifier & FWait)
+ if (i.tm.opcode_modifier.fwait)
if (!add_prefix (FWAIT_OPCODE))
return;
/* Check string instruction segment overrides. */
- if ((i.tm.opcode_modifier & IsString) != 0 && i.mem_operands != 0)
+ if (i.tm.opcode_modifier.isstring && i.mem_operands != 0)
{
if (!check_string ())
return;
+ i.disp_operands = 0;
}
if (!process_suffix ())
if (!finalize_imm ())
return;
- if (i.types[0] & Imm1)
+ if (i.types[0].bitfield.imm1)
i.imm_operands = 0; /* kludge for shift insns. */
- if (i.types[0] & ImplicitRegister)
- i.reg_operands--;
- if (i.types[1] & ImplicitRegister)
- i.reg_operands--;
- if (i.types[2] & ImplicitRegister)
- i.reg_operands--;
- if (i.tm.opcode_modifier & ImmExt)
- {
- expressionS *exp;
+ for (j = 0; j < 3; j++)
+ if (i.types[j].bitfield.inoutportreg
+ || i.types[j].bitfield.shiftcount
+ || i.types[j].bitfield.acc
+ || i.types[j].bitfield.floatacc)
+ i.reg_operands--;
- if ((i.tm.cpu_flags & CpuPNI) && i.operands > 0)
- {
- /* These Intel Prescott New Instructions have the fixed
- operands with an opcode suffix which is coded in the same
- place as an 8-bit immediate field would be. Here we check
- those operands and remove them afterwards. */
- unsigned int x;
-
- for (x = 0; x < i.operands; x++)
- if (i.op[x].regs->reg_num != x)
- as_bad (_("can't use register '%%%s' as operand %d in '%s'."),
- i.op[x].regs->reg_name, x + 1, i.tm.name);
- i.operands = 0;
- }
-
- /* These AMD 3DNow! and Intel Katmai New Instructions have an
- opcode suffix which is coded in the same place as an 8-bit
- immediate field would be. Here we fake an 8-bit immediate
- operand from the opcode suffix stored in tm.extension_opcode. */
-
- assert (i.imm_operands == 0 && i.operands <= 2 && 2 < MAX_OPERANDS);
-
- exp = &im_expressions[i.imm_operands++];
- i.op[i.operands].imms = exp;
- i.types[i.operands++] = Imm8;
- exp->X_op = O_constant;
- exp->X_add_number = i.tm.extension_opcode;
- i.tm.extension_opcode = None;
- }
+ /* ImmExt should be processed after SSE2AVX. */
+ if (!i.tm.opcode_modifier.sse2avx
+ && i.tm.opcode_modifier.immext)
+ process_immext ();
/* For insns with operands there are more diddles to do to the opcode. */
if (i.operands)
if (!process_operands ())
return;
}
- else if (!quiet_warnings && (i.tm.opcode_modifier & Ugh) != 0)
+ else if (!quiet_warnings && i.tm.opcode_modifier.ugh)
{
/* UnixWare fsub no args is alias for fsubp, fadd -> faddp, etc. */
as_warn (_("translating to `%sp'"), i.tm.name);
}
+ if (i.tm.opcode_modifier.vex)
+ build_vex_prefix (t);
+
/* Handle conversion of 'int $3' --> special int3 insn. */
if (i.tm.base_opcode == INT_OPCODE && i.op[0].imms->X_add_number == 3)
{
i.imm_operands = 0;
}
- if ((i.tm.opcode_modifier & (Jump | JumpByte | JumpDword))
+ if ((i.tm.opcode_modifier.jump
+ || i.tm.opcode_modifier.jumpbyte
+ || i.tm.opcode_modifier.jumpdword)
&& i.op[0].disps->X_op == O_constant)
{
/* Convert "jmp constant" (and "call constant") to a jump (call) to
i.op[0].disps->X_op = O_symbol;
}
- if ((i.tm.opcode_modifier & Rex64) != 0)
- i.rex |= REX_MODE64;
+ if (i.tm.opcode_modifier.rex64)
+ i.rex |= REX_W;
/* For 8 bit registers we need an empty rex prefix. Also if the
instruction already has a prefix, we need to convert old
registers to new ones. */
- if (((i.types[0] & Reg8) != 0
+ if ((i.types[0].bitfield.reg8
&& (i.op[0].regs->reg_flags & RegRex64) != 0)
- || ((i.types[1] & Reg8) != 0
+ || (i.types[1].bitfield.reg8
&& (i.op[1].regs->reg_flags & RegRex64) != 0)
- || (((i.types[0] & Reg8) != 0 || (i.types[1] & Reg8) != 0)
+ || ((i.types[0].bitfield.reg8
+ || i.types[1].bitfield.reg8)
&& i.rex != 0))
{
int x;
for (x = 0; x < 2; x++)
{
/* Look for 8 bit operand that uses old registers. */
- if ((i.types[x] & Reg8) != 0
+ if (i.types[x].bitfield.reg8
&& (i.op[x].regs->reg_flags & RegRex64) == 0)
{
/* In case it is "hi" register, give up. */
if (i.op[x].regs->reg_num > 3)
- as_bad (_("can't encode register '%%%s' in an instruction requiring REX prefix."),
- i.op[x].regs->reg_name);
+ as_bad (_("can't encode register '%s%s' in an "
+ "instruction requiring REX prefix."),
+ register_prefix, i.op[x].regs->reg_name);
/* Otherwise it is equivalent to the extended register.
Since the encoding doesn't change this is merely
}
}
- if (i.rex != 0)
+if (i.rex != 0)
add_prefix (REX_OPCODE | i.rex);
/* We are ready to output the insn. */
}
static char *
-parse_insn (line, mnemonic)
- char *line;
- char *mnemonic;
+parse_insn (char *line, char *mnemonic)
{
char *l = line;
char *token_start = l;
char *mnem_p;
int supported;
const template *t;
+ char *dot_p = NULL;
/* Non-zero if we found a prefix only acceptable with string insns. */
const char *expecting_string_instruction = NULL;
mnem_p = mnemonic;
while ((*mnem_p = mnemonic_chars[(unsigned char) *l]) != 0)
{
+ if (*mnem_p == '.')
+ dot_p = mnem_p;
mnem_p++;
if (mnem_p >= mnemonic + MAX_MNEM_SIZE)
{
if (*l != END_OF_INSN
&& (!is_space_char (*l) || l[1] != END_OF_INSN)
&& current_templates
- && (current_templates->start->opcode_modifier & IsPrefix))
+ && current_templates->start->opcode_modifier.isprefix)
{
- if (current_templates->start->cpu_flags
- & (flag_code != CODE_64BIT ? Cpu64 : CpuNo64))
+ if (!cpu_flags_check_cpu64 (current_templates->start->cpu_flags))
{
as_bad ((flag_code != CODE_64BIT
? _("`%s' is only supported in 64-bit mode")
}
/* If we are in 16-bit mode, do not allow addr16 or data16.
Similarly, in 32-bit mode, do not allow addr32 or data32. */
- if ((current_templates->start->opcode_modifier & (Size16 | Size32))
+ if ((current_templates->start->opcode_modifier.size16
+ || current_templates->start->opcode_modifier.size32)
&& flag_code != CODE_64BIT
- && (((current_templates->start->opcode_modifier & Size32) != 0)
+ && (current_templates->start->opcode_modifier.size32
^ (flag_code == CODE_16BIT)))
{
as_bad (_("redundant %s prefix"),
if (!current_templates)
{
+ /* Check if we should swap operand in encoding. */
+ if (mnem_p - 2 == dot_p && dot_p[1] == 's')
+ i.swap_operand = 1;
+ else
+ goto check_suffix;
+ mnem_p = dot_p;
+ *dot_p = '\0';
+ current_templates = hash_find (op_hash, mnemonic);
+ }
+
+ if (!current_templates)
+ {
+check_suffix:
/* See if we can get a match by trimming off a suffix. */
switch (mnem_p[-1])
{
}
}
- if (current_templates->start->opcode_modifier & (Jump | JumpByte))
+ if (current_templates->start->opcode_modifier.jump
+ || current_templates->start->opcode_modifier.jumpbyte)
{
/* Check for a branch hint. We allow ",pt" and ",pn" for
predict taken and predict not taken respectively.
supported = 0;
for (t = current_templates->start; t < current_templates->end; ++t)
{
- if (!((t->cpu_flags & ~(Cpu64 | CpuNo64))
- & ~(cpu_arch_flags & ~(Cpu64 | CpuNo64))))
- supported |= 1;
- if (!(t->cpu_flags & (flag_code == CODE_64BIT ? CpuNo64 : Cpu64)))
- supported |= 2;
+ supported |= cpu_flags_match (t);
+ if (supported == CPU_FLAGS_PERFECT_MATCH)
+ goto skip;
}
- if (!(supported & 2))
+
+ if (!(supported & CPU_FLAGS_64BIT_MATCH))
{
as_bad (flag_code == CODE_64BIT
? _("`%s' is not supported in 64-bit mode")
current_templates->start->name);
return NULL;
}
- if (!(supported & 1))
+ if (supported != CPU_FLAGS_PERFECT_MATCH)
{
- as_warn (_("`%s' is not supported on `%s%s'"),
- current_templates->start->name,
- cpu_arch_name,
- cpu_sub_arch_name ? cpu_sub_arch_name : "");
+ as_bad (_("`%s' is not supported on `%s%s'"),
+ current_templates->start->name,
+ cpu_arch_name ? cpu_arch_name : default_arch,
+ cpu_sub_arch_name ? cpu_sub_arch_name : "");
+ return NULL;
}
- else if ((Cpu386 & ~cpu_arch_flags) && (flag_code != CODE_16BIT))
+
+skip:
+ if (!cpu_arch_flags.bitfield.cpui386
+ && (flag_code != CODE_16BIT))
{
as_warn (_("use .code16 to ensure correct addressing mode"));
}
static templates override;
for (t = current_templates->start; t < current_templates->end; ++t)
- if (t->opcode_modifier & IsString)
+ if (t->opcode_modifier.isstring)
break;
if (t >= current_templates->end)
{
as_bad (_("expecting string instruction after `%s'"),
- expecting_string_instruction);
+ expecting_string_instruction);
return NULL;
}
for (override.start = t; t < current_templates->end; ++t)
- if (!(t->opcode_modifier & IsString))
+ if (!t->opcode_modifier.isstring)
break;
override.end = t;
current_templates = &override;
}
static char *
-parse_operands (l, mnemonic)
- char *l;
- const char *mnemonic;
+parse_operands (char *l, const char *mnemonic)
{
char *token_start;
{ /* Yes, we've read in another operand. */
unsigned int operand_ok;
this_operand = i.operands++;
+ i.types[this_operand].bitfield.unspecified = 1;
if (i.operands > MAX_OPERANDS)
{
as_bad (_("spurious operands; (%d operands/instruction max)"),
i386_intel_operand (token_start,
intel_float_operand (mnemonic));
else
- operand_ok = i386_operand (token_start);
+ operand_ok = i386_att_operand (token_start);
RESTORE_END_STRING (l);
if (!operand_ok)
}
static void
-swap_operands ()
+swap_2_operands (int xchg1, int xchg2)
{
union i386_op temp_op;
- unsigned int temp_type;
+ i386_operand_type temp_type;
enum bfd_reloc_code_real temp_reloc;
- int xchg1 = 0;
- int xchg2 = 0;
- if (i.operands == 2)
- {
- xchg1 = 0;
- xchg2 = 1;
- }
- else if (i.operands == 3)
- {
- xchg1 = 0;
- xchg2 = 2;
- }
temp_type = i.types[xchg2];
i.types[xchg2] = i.types[xchg1];
i.types[xchg1] = temp_type;
temp_reloc = i.reloc[xchg2];
i.reloc[xchg2] = i.reloc[xchg1];
i.reloc[xchg1] = temp_reloc;
+}
+
+static void
+swap_operands (void)
+{
+ switch (i.operands)
+ {
+ case 5:
+ case 4:
+ swap_2_operands (1, i.operands - 2);
+ case 3:
+ case 2:
+ swap_2_operands (0, i.operands - 1);
+ break;
+ default:
+ abort ();
+ }
if (i.mem_operands == 2)
{
/* Try to ensure constant immediates are represented in the smallest
opcode possible. */
static void
-optimize_imm ()
+optimize_imm (void)
{
char guess_suffix = 0;
int op;
but the following works for instructions with immediates.
In any case, we can't set i.suffix yet. */
for (op = i.operands; --op >= 0;)
- if (i.types[op] & Reg)
+ if (i.types[op].bitfield.reg8)
+ {
+ guess_suffix = BYTE_MNEM_SUFFIX;
+ break;
+ }
+ else if (i.types[op].bitfield.reg16)
+ {
+ guess_suffix = WORD_MNEM_SUFFIX;
+ break;
+ }
+ else if (i.types[op].bitfield.reg32)
+ {
+ guess_suffix = LONG_MNEM_SUFFIX;
+ break;
+ }
+ else if (i.types[op].bitfield.reg64)
{
- if (i.types[op] & Reg8)
- guess_suffix = BYTE_MNEM_SUFFIX;
- else if (i.types[op] & Reg16)
- guess_suffix = WORD_MNEM_SUFFIX;
- else if (i.types[op] & Reg32)
- guess_suffix = LONG_MNEM_SUFFIX;
- else if (i.types[op] & Reg64)
- guess_suffix = QWORD_MNEM_SUFFIX;
+ guess_suffix = QWORD_MNEM_SUFFIX;
break;
}
}
guess_suffix = WORD_MNEM_SUFFIX;
for (op = i.operands; --op >= 0;)
- if (i.types[op] & Imm)
+ if (operand_type_check (i.types[op], imm))
{
switch (i.op[op].imms->X_op)
{
switch (guess_suffix)
{
case LONG_MNEM_SUFFIX:
- i.types[op] |= Imm32 | Imm64;
+ i.types[op].bitfield.imm32 = 1;
+ i.types[op].bitfield.imm64 = 1;
break;
case WORD_MNEM_SUFFIX:
- i.types[op] |= Imm16 | Imm32S | Imm32 | Imm64;
+ i.types[op].bitfield.imm16 = 1;
+ i.types[op].bitfield.imm32 = 1;
+ i.types[op].bitfield.imm32s = 1;
+ i.types[op].bitfield.imm64 = 1;
break;
case BYTE_MNEM_SUFFIX:
- i.types[op] |= Imm16 | Imm8 | Imm8S | Imm32S | Imm32 | Imm64;
+ i.types[op].bitfield.imm8 = 1;
+ i.types[op].bitfield.imm8s = 1;
+ i.types[op].bitfield.imm16 = 1;
+ i.types[op].bitfield.imm32 = 1;
+ i.types[op].bitfield.imm32s = 1;
+ i.types[op].bitfield.imm64 = 1;
break;
}
whether it will fit in an even smaller size.
This allows a 16-bit operand such as $0xffe0 to
be recognised as within Imm8S range. */
- if ((i.types[op] & Imm16)
+ if ((i.types[op].bitfield.imm16)
&& (i.op[op].imms->X_add_number & ~(offsetT) 0xffff) == 0)
{
i.op[op].imms->X_add_number =
(((i.op[op].imms->X_add_number & 0xffff) ^ 0x8000) - 0x8000);
}
- if ((i.types[op] & Imm32)
+ if ((i.types[op].bitfield.imm32)
&& ((i.op[op].imms->X_add_number & ~(((offsetT) 2 << 31) - 1))
== 0))
{
^ ((offsetT) 1 << 31))
- ((offsetT) 1 << 31));
}
- i.types[op] |= smallest_imm_type (i.op[op].imms->X_add_number);
+ i.types[op]
+ = operand_type_or (i.types[op],
+ smallest_imm_type (i.op[op].imms->X_add_number));
/* We must avoid matching of Imm32 templates when 64bit
only immediate is available. */
if (guess_suffix == QWORD_MNEM_SUFFIX)
- i.types[op] &= ~Imm32;
+ i.types[op].bitfield.imm32 = 0;
break;
case O_absent:
prevent matching a set of insns that only supports sizes other
than those matching the insn suffix. */
{
- unsigned int mask, allowed = 0;
+ i386_operand_type mask, allowed;
const template *t;
- for (t = current_templates->start; t < current_templates->end; ++t)
- allowed |= t->operand_types[op];
+ operand_type_set (&mask, 0);
+ operand_type_set (&allowed, 0);
+
+ for (t = current_templates->start;
+ t < current_templates->end;
+ ++t)
+ allowed = operand_type_or (allowed,
+ t->operand_types[op]);
switch (guess_suffix)
{
case QWORD_MNEM_SUFFIX:
- mask = Imm64 | Imm32S;
+ mask.bitfield.imm64 = 1;
+ mask.bitfield.imm32s = 1;
break;
case LONG_MNEM_SUFFIX:
- mask = Imm32;
+ mask.bitfield.imm32 = 1;
break;
case WORD_MNEM_SUFFIX:
- mask = Imm16;
+ mask.bitfield.imm16 = 1;
break;
case BYTE_MNEM_SUFFIX:
- mask = Imm8;
+ mask.bitfield.imm8 = 1;
break;
default:
- mask = 0;
break;
}
- if (mask & allowed)
- i.types[op] &= mask;
+ allowed = operand_type_and (mask, allowed);
+ if (!operand_type_all_zero (&allowed))
+ i.types[op] = operand_type_and (i.types[op], mask);
}
break;
}
/* Try to use the smallest displacement type too. */
static void
-optimize_disp ()
+optimize_disp (void)
{
int op;
for (op = i.operands; --op >= 0;)
- if (i.types[op] & Disp)
+ if (operand_type_check (i.types[op], disp))
{
if (i.op[op].disps->X_op == O_constant)
{
offsetT disp = i.op[op].disps->X_add_number;
- if ((i.types[op] & Disp16)
+ if (i.types[op].bitfield.disp16
&& (disp & ~(offsetT) 0xffff) == 0)
{
/* If this operand is at most 16 bits, convert
to a signed 16 bit number and don't use 64bit
displacement. */
disp = (((disp & 0xffff) ^ 0x8000) - 0x8000);
- i.types[op] &= ~Disp64;
+ i.types[op].bitfield.disp64 = 0;
}
- if ((i.types[op] & Disp32)
+ if (i.types[op].bitfield.disp32
&& (disp & ~(((offsetT) 2 << 31) - 1)) == 0)
{
/* If this operand is at most 32 bits, convert
displacement. */
disp &= (((offsetT) 2 << 31) - 1);
disp = (disp ^ ((offsetT) 1 << 31)) - ((addressT) 1 << 31);
- i.types[op] &= ~Disp64;
+ i.types[op].bitfield.disp64 = 0;
}
- if (!disp && (i.types[op] & BaseIndex))
+ if (!disp && i.types[op].bitfield.baseindex)
{
- i.types[op] &= ~Disp;
+ i.types[op].bitfield.disp8 = 0;
+ i.types[op].bitfield.disp16 = 0;
+ i.types[op].bitfield.disp32 = 0;
+ i.types[op].bitfield.disp32s = 0;
+ i.types[op].bitfield.disp64 = 0;
i.op[op].disps = 0;
i.disp_operands--;
}
{
if (fits_in_signed_long (disp))
{
- i.types[op] &= ~Disp64;
- i.types[op] |= Disp32S;
+ i.types[op].bitfield.disp64 = 0;
+ i.types[op].bitfield.disp32s = 1;
}
if (fits_in_unsigned_long (disp))
- i.types[op] |= Disp32;
+ i.types[op].bitfield.disp32 = 1;
}
- if ((i.types[op] & (Disp32 | Disp32S | Disp16))
+ if ((i.types[op].bitfield.disp32
+ || i.types[op].bitfield.disp32s
+ || i.types[op].bitfield.disp16)
&& fits_in_signed_byte (disp))
- i.types[op] |= Disp8;
+ i.types[op].bitfield.disp8 = 1;
}
- else
+ else if (i.reloc[op] == BFD_RELOC_386_TLS_DESC_CALL
+ || i.reloc[op] == BFD_RELOC_X86_64_TLSDESC_CALL)
+ {
+ fix_new_exp (frag_now, frag_more (0) - frag_now->fr_literal, 0,
+ i.op[op].disps, 0, i.reloc[op]);
+ i.types[op].bitfield.disp8 = 0;
+ i.types[op].bitfield.disp16 = 0;
+ i.types[op].bitfield.disp32 = 0;
+ i.types[op].bitfield.disp32s = 0;
+ i.types[op].bitfield.disp64 = 0;
+ }
+ else
/* We only support 64bit displacement on constants. */
- i.types[op] &= ~Disp64;
+ i.types[op].bitfield.disp64 = 0;
}
}
-static int
-match_template ()
+static const template *
+match_template (void)
{
/* Points to template once we've found it. */
const template *t;
- unsigned int overlap0, overlap1, overlap2;
+ i386_operand_type overlap0, overlap1, overlap2, overlap3;
+ i386_operand_type overlap4;
unsigned int found_reverse_match;
- int suffix_check;
-
-#define MATCH(overlap, given, template) \
- ((overlap & ~JumpAbsolute) \
- && (((given) & (BaseIndex | JumpAbsolute)) \
- == ((overlap) & (BaseIndex | JumpAbsolute))))
-
- /* If given types r0 and r1 are registers they must be of the same type
- unless the expected operand type register overlap is null.
- Note that Acc in a template matches every size of reg. */
-#define CONSISTENT_REGISTER_MATCH(m0, g0, t0, m1, g1, t1) \
- (((g0) & Reg) == 0 || ((g1) & Reg) == 0 \
- || ((g0) & Reg) == ((g1) & Reg) \
- || ((((m0) & Acc) ? Reg : (t0)) & (((m1) & Acc) ? Reg : (t1)) & Reg) == 0 )
-
- overlap0 = 0;
- overlap1 = 0;
- overlap2 = 0;
+ i386_opcode_modifier suffix_check;
+ i386_operand_type operand_types [MAX_OPERANDS];
+ int addr_prefix_disp;
+ unsigned int j;
+ unsigned int found_cpu_match;
+ unsigned int check_register;
+
+#if MAX_OPERANDS != 5
+# error "MAX_OPERANDS must be 5."
+#endif
+
found_reverse_match = 0;
- suffix_check = (i.suffix == BYTE_MNEM_SUFFIX
- ? No_bSuf
- : (i.suffix == WORD_MNEM_SUFFIX
- ? No_wSuf
- : (i.suffix == SHORT_MNEM_SUFFIX
- ? No_sSuf
- : (i.suffix == LONG_MNEM_SUFFIX
- ? No_lSuf
- : (i.suffix == QWORD_MNEM_SUFFIX
- ? No_qSuf
- : (i.suffix == LONG_DOUBLE_MNEM_SUFFIX
- ? No_xSuf : 0))))));
-
- t = current_templates->start;
- if (i.suffix == QWORD_MNEM_SUFFIX
- && flag_code != CODE_64BIT
- && (intel_syntax
- ? !(t->opcode_modifier & IgnoreSize)
- && !intel_float_operand (t->name)
- : intel_float_operand (t->name) != 2)
- && (!(t->operand_types[0] & (RegMMX | RegXMM))
- || !(t->operand_types[t->operands > 1] & (RegMMX | RegXMM)))
- && (t->base_opcode != 0x0fc7
- || t->extension_opcode != 1 /* cmpxchg8b */))
- t = current_templates->end;
- for (; t < current_templates->end; t++)
- {
+ addr_prefix_disp = -1;
+
+ memset (&suffix_check, 0, sizeof (suffix_check));
+ if (i.suffix == BYTE_MNEM_SUFFIX)
+ suffix_check.no_bsuf = 1;
+ else if (i.suffix == WORD_MNEM_SUFFIX)
+ suffix_check.no_wsuf = 1;
+ else if (i.suffix == SHORT_MNEM_SUFFIX)
+ suffix_check.no_ssuf = 1;
+ else if (i.suffix == LONG_MNEM_SUFFIX)
+ suffix_check.no_lsuf = 1;
+ else if (i.suffix == QWORD_MNEM_SUFFIX)
+ suffix_check.no_qsuf = 1;
+ else if (i.suffix == LONG_DOUBLE_MNEM_SUFFIX)
+ suffix_check.no_ldsuf = 1;
+
+ for (t = current_templates->start; t < current_templates->end; t++)
+ {
+ addr_prefix_disp = -1;
+
/* Must have right number of operands. */
if (i.operands != t->operands)
continue;
+ /* Check processor support. */
+ found_cpu_match = (cpu_flags_match (t)
+ == CPU_FLAGS_PERFECT_MATCH);
+ if (!found_cpu_match)
+ continue;
+
+ /* Check old gcc support. */
+ if (!old_gcc && t->opcode_modifier.oldgcc)
+ continue;
+
+ /* Check AT&T mnemonic. */
+ if (intel_mnemonic && t->opcode_modifier.attmnemonic)
+ continue;
+
+ /* Check AT&T syntax Intel syntax. */
+ if ((intel_syntax && t->opcode_modifier.attsyntax)
+ || (!intel_syntax && t->opcode_modifier.intelsyntax))
+ continue;
+
/* Check the suffix, except for some instructions in intel mode. */
- if ((t->opcode_modifier & suffix_check)
- && !(intel_syntax
- && (t->opcode_modifier & IgnoreSize)))
+ if ((!intel_syntax || !t->opcode_modifier.ignoresize)
+ && ((t->opcode_modifier.no_bsuf && suffix_check.no_bsuf)
+ || (t->opcode_modifier.no_wsuf && suffix_check.no_wsuf)
+ || (t->opcode_modifier.no_lsuf && suffix_check.no_lsuf)
+ || (t->opcode_modifier.no_ssuf && suffix_check.no_ssuf)
+ || (t->opcode_modifier.no_qsuf && suffix_check.no_qsuf)
+ || (t->opcode_modifier.no_ldsuf && suffix_check.no_ldsuf)))
+ continue;
+
+ if (!operand_size_match (t))
+ continue;
+
+ for (j = 0; j < MAX_OPERANDS; j++)
+ operand_types[j] = t->operand_types[j];
+
+ /* In general, don't allow 64-bit operands in 32-bit mode. */
+ if (i.suffix == QWORD_MNEM_SUFFIX
+ && flag_code != CODE_64BIT
+ && (intel_syntax
+ ? (!t->opcode_modifier.ignoresize
+ && !intel_float_operand (t->name))
+ : intel_float_operand (t->name) != 2)
+ && ((!operand_types[0].bitfield.regmmx
+ && !operand_types[0].bitfield.regxmm
+ && !operand_types[0].bitfield.regymm)
+ || (!operand_types[t->operands > 1].bitfield.regmmx
+ && !!operand_types[t->operands > 1].bitfield.regxmm
+ && !!operand_types[t->operands > 1].bitfield.regymm))
+ && (t->base_opcode != 0x0fc7
+ || t->extension_opcode != 1 /* cmpxchg8b */))
+ continue;
+
+ /* In general, don't allow 32-bit operands on pre-386. */
+ else if (i.suffix == LONG_MNEM_SUFFIX
+ && !cpu_arch_flags.bitfield.cpui386
+ && (intel_syntax
+ ? (!t->opcode_modifier.ignoresize
+ && !intel_float_operand (t->name))
+ : intel_float_operand (t->name) != 2)
+ && ((!operand_types[0].bitfield.regmmx
+ && !operand_types[0].bitfield.regxmm)
+ || (!operand_types[t->operands > 1].bitfield.regmmx
+ && !!operand_types[t->operands > 1].bitfield.regxmm)))
continue;
/* Do not verify operands when there are none. */
- else if (!t->operands)
+ else
{
- if (t->cpu_flags & ~cpu_arch_flags)
- continue;
- /* We've found a match; break out of loop. */
- break;
+ if (!t->operands)
+ /* We've found a match; break out of loop. */
+ break;
}
- overlap0 = i.types[0] & t->operand_types[0];
+ /* Address size prefix will turn Disp64/Disp32/Disp16 operand
+ into Disp32/Disp16/Disp32 operand. */
+ if (i.prefix[ADDR_PREFIX] != 0)
+ {
+ /* There should be only one Disp operand. */
+ switch (flag_code)
+ {
+ case CODE_16BIT:
+ for (j = 0; j < MAX_OPERANDS; j++)
+ {
+ if (operand_types[j].bitfield.disp16)
+ {
+ addr_prefix_disp = j;
+ operand_types[j].bitfield.disp32 = 1;
+ operand_types[j].bitfield.disp16 = 0;
+ break;
+ }
+ }
+ break;
+ case CODE_32BIT:
+ for (j = 0; j < MAX_OPERANDS; j++)
+ {
+ if (operand_types[j].bitfield.disp32)
+ {
+ addr_prefix_disp = j;
+ operand_types[j].bitfield.disp32 = 0;
+ operand_types[j].bitfield.disp16 = 1;
+ break;
+ }
+ }
+ break;
+ case CODE_64BIT:
+ for (j = 0; j < MAX_OPERANDS; j++)
+ {
+ if (operand_types[j].bitfield.disp64)
+ {
+ addr_prefix_disp = j;
+ operand_types[j].bitfield.disp64 = 0;
+ operand_types[j].bitfield.disp32 = 1;
+ break;
+ }
+ }
+ break;
+ }
+ }
+
+ /* We check register size only if size of operands can be
+ encoded the canonical way. */
+ check_register = t->opcode_modifier.w;
+ overlap0 = operand_type_and (i.types[0], operand_types[0]);
switch (t->operands)
{
case 1:
- if (!MATCH (overlap0, i.types[0], t->operand_types[0]))
+ if (!operand_type_match (overlap0, i.types[0]))
continue;
break;
case 2:
+ /* xchg %eax, %eax is a special case. It is an aliase for nop
+ only in 32bit mode and we can use opcode 0x90. In 64bit
+ mode, we can't use 0x90 for xchg %eax, %eax since it should
+ zero-extend %eax to %rax. */
+ if (flag_code == CODE_64BIT
+ && t->base_opcode == 0x90
+ && operand_type_equal (&i.types [0], &acc32)
+ && operand_type_equal (&i.types [1], &acc32))
+ continue;
+ if (i.swap_operand)
+ {
+ /* If we swap operand in encoding, we either match
+ the next one or reverse direction of operands. */
+ if (t->opcode_modifier.s)
+ continue;
+ else if (t->opcode_modifier.d)
+ goto check_reverse;
+ }
+
case 3:
- overlap1 = i.types[1] & t->operand_types[1];
- if (!MATCH (overlap0, i.types[0], t->operand_types[0])
- || !MATCH (overlap1, i.types[1], t->operand_types[1])
- || !CONSISTENT_REGISTER_MATCH (overlap0, i.types[0],
- t->operand_types[0],
- overlap1, i.types[1],
- t->operand_types[1]))
+ /* If we swap operand in encoding, we match the next one. */
+ if (i.swap_operand && t->opcode_modifier.s)
+ continue;
+ case 4:
+ case 5:
+ overlap1 = operand_type_and (i.types[1], operand_types[1]);
+ if (!operand_type_match (overlap0, i.types[0])
+ || !operand_type_match (overlap1, i.types[1])
+ || (check_register
+ && !operand_type_register_match (overlap0, i.types[0],
+ operand_types[0],
+ overlap1, i.types[1],
+ operand_types[1])))
{
/* Check if other direction is valid ... */
- if ((t->opcode_modifier & (D | FloatD)) == 0)
+ if (!t->opcode_modifier.d && !t->opcode_modifier.floatd)
continue;
+check_reverse:
/* Try reversing direction of operands. */
- overlap0 = i.types[0] & t->operand_types[1];
- overlap1 = i.types[1] & t->operand_types[0];
- if (!MATCH (overlap0, i.types[0], t->operand_types[1])
- || !MATCH (overlap1, i.types[1], t->operand_types[0])
- || !CONSISTENT_REGISTER_MATCH (overlap0, i.types[0],
- t->operand_types[1],
- overlap1, i.types[1],
- t->operand_types[0]))
+ overlap0 = operand_type_and (i.types[0], operand_types[1]);
+ overlap1 = operand_type_and (i.types[1], operand_types[0]);
+ if (!operand_type_match (overlap0, i.types[0])
+ || !operand_type_match (overlap1, i.types[1])
+ || (check_register
+ && !operand_type_register_match (overlap0,
+ i.types[0],
+ operand_types[1],
+ overlap1,
+ i.types[1],
+ operand_types[0])))
{
/* Does not match either direction. */
continue;
}
/* found_reverse_match holds which of D or FloatDR
we've found. */
- found_reverse_match = t->opcode_modifier & (D | FloatDR);
+ if (t->opcode_modifier.d)
+ found_reverse_match = Opcode_D;
+ else if (t->opcode_modifier.floatd)
+ found_reverse_match = Opcode_FloatD;
+ else
+ found_reverse_match = 0;
+ if (t->opcode_modifier.floatr)
+ found_reverse_match |= Opcode_FloatR;
}
- /* Found a forward 2 operand match here. */
- else if (t->operands == 3)
+ else
{
- /* Here we make use of the fact that there are no
- reverse match 3 operand instructions, and all 3
- operand instructions only need to be checked for
- register consistency between operands 2 and 3. */
- overlap2 = i.types[2] & t->operand_types[2];
- if (!MATCH (overlap2, i.types[2], t->operand_types[2])
- || !CONSISTENT_REGISTER_MATCH (overlap1, i.types[1],
- t->operand_types[1],
- overlap2, i.types[2],
- t->operand_types[2]))
+ /* Found a forward 2 operand match here. */
+ switch (t->operands)
+ {
+ case 5:
+ overlap4 = operand_type_and (i.types[4],
+ operand_types[4]);
+ case 4:
+ overlap3 = operand_type_and (i.types[3],
+ operand_types[3]);
+ case 3:
+ overlap2 = operand_type_and (i.types[2],
+ operand_types[2]);
+ break;
+ }
- continue;
+ switch (t->operands)
+ {
+ case 5:
+ if (!operand_type_match (overlap4, i.types[4])
+ || !operand_type_register_match (overlap3,
+ i.types[3],
+ operand_types[3],
+ overlap4,
+ i.types[4],
+ operand_types[4]))
+ continue;
+ case 4:
+ if (!operand_type_match (overlap3, i.types[3])
+ || (check_register
+ && !operand_type_register_match (overlap2,
+ i.types[2],
+ operand_types[2],
+ overlap3,
+ i.types[3],
+ operand_types[3])))
+ continue;
+ case 3:
+ /* Here we make use of the fact that there are no
+ reverse match 3 operand instructions, and all 3
+ operand instructions only need to be checked for
+ register consistency between operands 2 and 3. */
+ if (!operand_type_match (overlap2, i.types[2])
+ || (check_register
+ && !operand_type_register_match (overlap1,
+ i.types[1],
+ operand_types[1],
+ overlap2,
+ i.types[2],
+ operand_types[2])))
+ continue;
+ break;
+ }
}
- /* Found either forward/reverse 2 or 3 operand match here:
+ /* Found either forward/reverse 2, 3 or 4 operand match here:
slip through to break. */
}
- if (t->cpu_flags & ~cpu_arch_flags)
+ if (!found_cpu_match)
{
found_reverse_match = 0;
continue;
}
+
/* We've found a match; break out of loop. */
break;
}
if (t == current_templates->end)
{
/* We found no match. */
- as_bad (_("suffix or operands invalid for `%s'"),
- current_templates->start->name);
- return 0;
+ if (intel_syntax)
+ as_bad (_("ambiguous operand size or operands invalid for `%s'"),
+ current_templates->start->name);
+ else
+ as_bad (_("suffix or operands invalid for `%s'"),
+ current_templates->start->name);
+ return NULL;
}
if (!quiet_warnings)
{
if (!intel_syntax
- && ((i.types[0] & JumpAbsolute)
- != (t->operand_types[0] & JumpAbsolute)))
+ && (i.types[0].bitfield.jumpabsolute
+ != operand_types[0].bitfield.jumpabsolute))
{
as_warn (_("indirect %s without `*'"), t->name);
}
- if ((t->opcode_modifier & (IsPrefix | IgnoreSize))
- == (IsPrefix | IgnoreSize))
+ if (t->opcode_modifier.isprefix
+ && t->opcode_modifier.ignoresize)
{
/* Warn them that a data or address size prefix doesn't
affect assembly of the next line of code. */
/* Copy the template we found. */
i.tm = *t;
+
+ if (addr_prefix_disp != -1)
+ i.tm.operand_types[addr_prefix_disp]
+ = operand_types[addr_prefix_disp];
+
if (found_reverse_match)
{
/* If we found a reverse match we must alter the opcode
i.tm.base_opcode ^= found_reverse_match;
- i.tm.operand_types[0] = t->operand_types[1];
- i.tm.operand_types[1] = t->operand_types[0];
+ i.tm.operand_types[0] = operand_types[1];
+ i.tm.operand_types[1] = operand_types[0];
}
- return 1;
+ return t;
}
static int
-check_string ()
+check_string (void)
{
- int mem_op = (i.types[0] & AnyMem) ? 0 : 1;
- if ((i.tm.operand_types[mem_op] & EsSeg) != 0)
+ int mem_op = operand_type_check (i.types[0], anymem) ? 0 : 1;
+ if (i.tm.operand_types[mem_op].bitfield.esseg)
{
if (i.seg[0] != NULL && i.seg[0] != &es)
{
- as_bad (_("`%s' operand %d must use `%%es' segment"),
+ as_bad (_("`%s' operand %d must use `%ses' segment"),
i.tm.name,
- mem_op + 1);
+ mem_op + 1,
+ register_prefix);
return 0;
}
/* There's only ever one segment override allowed per instruction.
instructions store it, allowing common code. */
i.seg[0] = i.seg[1];
}
- else if ((i.tm.operand_types[mem_op + 1] & EsSeg) != 0)
+ else if (i.tm.operand_types[mem_op + 1].bitfield.esseg)
{
if (i.seg[1] != NULL && i.seg[1] != &es)
{
- as_bad (_("`%s' operand %d must use `%%es' segment"),
+ as_bad (_("`%s' operand %d must use `%ses' segment"),
i.tm.name,
- mem_op + 2);
+ mem_op + 2,
+ register_prefix);
return 0;
}
}
{
/* If matched instruction specifies an explicit instruction mnemonic
suffix, use it. */
- if (i.tm.opcode_modifier & (Size16 | Size32 | Size64))
- {
- if (i.tm.opcode_modifier & Size16)
- i.suffix = WORD_MNEM_SUFFIX;
- else if (i.tm.opcode_modifier & Size64)
- i.suffix = QWORD_MNEM_SUFFIX;
- else
- i.suffix = LONG_MNEM_SUFFIX;
- }
+ if (i.tm.opcode_modifier.size16)
+ i.suffix = WORD_MNEM_SUFFIX;
+ else if (i.tm.opcode_modifier.size32)
+ i.suffix = LONG_MNEM_SUFFIX;
+ else if (i.tm.opcode_modifier.size64)
+ i.suffix = QWORD_MNEM_SUFFIX;
else if (i.reg_operands)
{
/* If there's no instruction mnemonic suffix we try to invent one
{
/* We take i.suffix from the last register operand specified,
Destination register type is more significant than source
- register type. */
- int op;
+ register type. crc32 in SSE4.2 prefers source register
+ type. */
+ if (i.tm.base_opcode == 0xf20f38f1)
+ {
+ if (i.types[0].bitfield.reg16)
+ i.suffix = WORD_MNEM_SUFFIX;
+ else if (i.types[0].bitfield.reg32)
+ i.suffix = LONG_MNEM_SUFFIX;
+ else if (i.types[0].bitfield.reg64)
+ i.suffix = QWORD_MNEM_SUFFIX;
+ }
+ else if (i.tm.base_opcode == 0xf20f38f0)
+ {
+ if (i.types[0].bitfield.reg8)
+ i.suffix = BYTE_MNEM_SUFFIX;
+ }
- for (op = i.operands; --op >= 0;)
- if ((i.types[op] & Reg)
- && !(i.tm.operand_types[op] & InOutPortReg))
- {
- i.suffix = ((i.types[op] & Reg8) ? BYTE_MNEM_SUFFIX :
- (i.types[op] & Reg16) ? WORD_MNEM_SUFFIX :
- (i.types[op] & Reg64) ? QWORD_MNEM_SUFFIX :
- LONG_MNEM_SUFFIX);
- break;
- }
+ if (!i.suffix)
+ {
+ int op;
+
+ if (i.tm.base_opcode == 0xf20f38f1
+ || i.tm.base_opcode == 0xf20f38f0)
+ {
+ /* We have to know the operand size for crc32. */
+ as_bad (_("ambiguous memory operand size for `%s`"),
+ i.tm.name);
+ return 0;
+ }
+
+ for (op = i.operands; --op >= 0;)
+ if (!i.tm.operand_types[op].bitfield.inoutportreg)
+ {
+ if (i.types[op].bitfield.reg8)
+ {
+ i.suffix = BYTE_MNEM_SUFFIX;
+ break;
+ }
+ else if (i.types[op].bitfield.reg16)
+ {
+ i.suffix = WORD_MNEM_SUFFIX;
+ break;
+ }
+ else if (i.types[op].bitfield.reg32)
+ {
+ i.suffix = LONG_MNEM_SUFFIX;
+ break;
+ }
+ else if (i.types[op].bitfield.reg64)
+ {
+ i.suffix = QWORD_MNEM_SUFFIX;
+ break;
+ }
+ }
+ }
}
else if (i.suffix == BYTE_MNEM_SUFFIX)
{
}
else if (i.suffix == QWORD_MNEM_SUFFIX)
{
- if (!check_qword_reg ())
+ if (intel_syntax
+ && i.tm.opcode_modifier.ignoresize
+ && i.tm.opcode_modifier.no_qsuf)
+ i.suffix = 0;
+ else if (!check_qword_reg ())
return 0;
}
else if (i.suffix == WORD_MNEM_SUFFIX)
if (!check_word_reg ())
return 0;
}
- else if (intel_syntax && (i.tm.opcode_modifier & IgnoreSize))
+ else if (i.suffix == XMMWORD_MNEM_SUFFIX
+ || i.suffix == YMMWORD_MNEM_SUFFIX)
+ {
+ /* Skip if the instruction has x/y suffix. match_template
+ should check if it is a valid suffix. */
+ }
+ else if (intel_syntax && i.tm.opcode_modifier.ignoresize)
/* Do nothing if the instruction is going to ignore the prefix. */
;
else
abort ();
}
- else if ((i.tm.opcode_modifier & DefaultSize)
+ else if (i.tm.opcode_modifier.defaultsize
&& !i.suffix
/* exclude fldenv/frstor/fsave/fstenv */
- && (i.tm.opcode_modifier & No_sSuf))
+ && i.tm.opcode_modifier.no_ssuf)
{
i.suffix = stackop_size;
}
else if (intel_syntax
&& !i.suffix
- && ((i.tm.operand_types[0] & JumpAbsolute)
- || (i.tm.opcode_modifier & (JumpByte|JumpInterSegment))
- || (i.tm.base_opcode == 0x0f01 /* [ls][gi]dt */
- && i.tm.extension_opcode <= 3)))
+ && (i.tm.operand_types[0].bitfield.jumpabsolute
+ || i.tm.opcode_modifier.jumpbyte
+ || i.tm.opcode_modifier.jumpintersegment
+ || (i.tm.base_opcode == 0x0f01 /* [ls][gi]dt */
+ && i.tm.extension_opcode <= 3)))
{
switch (flag_code)
{
case CODE_64BIT:
- if (!(i.tm.opcode_modifier & No_qSuf))
+ if (!i.tm.opcode_modifier.no_qsuf)
{
i.suffix = QWORD_MNEM_SUFFIX;
break;
}
case CODE_32BIT:
- if (!(i.tm.opcode_modifier & No_lSuf))
+ if (!i.tm.opcode_modifier.no_lsuf)
i.suffix = LONG_MNEM_SUFFIX;
break;
case CODE_16BIT:
- if (!(i.tm.opcode_modifier & No_wSuf))
+ if (!i.tm.opcode_modifier.no_wsuf)
i.suffix = WORD_MNEM_SUFFIX;
break;
}
{
if (!intel_syntax)
{
- if (i.tm.opcode_modifier & W)
+ if (i.tm.opcode_modifier.w)
{
- as_bad (_("no instruction mnemonic suffix given and no register operands; can't size instruction"));
+ as_bad (_("no instruction mnemonic suffix given and "
+ "no register operands; can't size instruction"));
return 0;
}
}
else
{
- unsigned int suffixes = ~i.tm.opcode_modifier
- & (No_bSuf
- | No_wSuf
- | No_lSuf
- | No_sSuf
- | No_xSuf
- | No_qSuf);
-
- if ((i.tm.opcode_modifier & W)
+ unsigned int suffixes;
+
+ suffixes = !i.tm.opcode_modifier.no_bsuf;
+ if (!i.tm.opcode_modifier.no_wsuf)
+ suffixes |= 1 << 1;
+ if (!i.tm.opcode_modifier.no_lsuf)
+ suffixes |= 1 << 2;
+ if (!i.tm.opcode_modifier.no_ldsuf)
+ suffixes |= 1 << 3;
+ if (!i.tm.opcode_modifier.no_ssuf)
+ suffixes |= 1 << 4;
+ if (!i.tm.opcode_modifier.no_qsuf)
+ suffixes |= 1 << 5;
+
+ /* There are more than suffix matches. */
+ if (i.tm.opcode_modifier.w
|| ((suffixes & (suffixes - 1))
- && !(i.tm.opcode_modifier & (DefaultSize | IgnoreSize))))
+ && !i.tm.opcode_modifier.defaultsize
+ && !i.tm.opcode_modifier.ignoresize))
{
as_bad (_("ambiguous operand size for `%s'"), i.tm.name);
return 0;
/* Change the opcode based on the operand size given by i.suffix;
We don't need to change things for byte insns. */
- if (i.suffix && i.suffix != BYTE_MNEM_SUFFIX)
+ if (i.suffix
+ && i.suffix != BYTE_MNEM_SUFFIX
+ && i.suffix != XMMWORD_MNEM_SUFFIX
+ && i.suffix != YMMWORD_MNEM_SUFFIX)
{
/* It's not a byte, select word/dword operation. */
- if (i.tm.opcode_modifier & W)
+ if (i.tm.opcode_modifier.w)
{
- if (i.tm.opcode_modifier & ShortForm)
+ if (i.tm.opcode_modifier.shortform)
i.tm.base_opcode |= 8;
else
i.tm.base_opcode |= 1;
/* Now select between word & dword operations via the operand
size prefix, except for instructions that will ignore this
prefix anyway. */
- if (i.suffix != QWORD_MNEM_SUFFIX
- && i.suffix != LONG_DOUBLE_MNEM_SUFFIX
- && !(i.tm.opcode_modifier & (IgnoreSize | FloatMF))
- && ((i.suffix == LONG_MNEM_SUFFIX) == (flag_code == CODE_16BIT)
- || (flag_code == CODE_64BIT
- && (i.tm.opcode_modifier & JumpByte))))
+ if (i.tm.opcode_modifier.addrprefixop0)
+ {
+ /* The address size override prefix changes the size of the
+ first operand. */
+ if ((flag_code == CODE_32BIT
+ && i.op->regs[0].reg_type.bitfield.reg16)
+ || (flag_code != CODE_32BIT
+ && i.op->regs[0].reg_type.bitfield.reg32))
+ if (!add_prefix (ADDR_PREFIX_OPCODE))
+ return 0;
+ }
+ else if (i.suffix != QWORD_MNEM_SUFFIX
+ && i.suffix != LONG_DOUBLE_MNEM_SUFFIX
+ && !i.tm.opcode_modifier.ignoresize
+ && !i.tm.opcode_modifier.floatmf
+ && ((i.suffix == LONG_MNEM_SUFFIX) == (flag_code == CODE_16BIT)
+ || (flag_code == CODE_64BIT
+ && i.tm.opcode_modifier.jumpbyte)))
{
unsigned int prefix = DATA_PREFIX_OPCODE;
- if (i.tm.opcode_modifier & JumpByte) /* jcxz, loop */
+ if (i.tm.opcode_modifier.jumpbyte) /* jcxz, loop */
prefix = ADDR_PREFIX_OPCODE;
if (!add_prefix (prefix))
/* Set mode64 for an operand. */
if (i.suffix == QWORD_MNEM_SUFFIX
&& flag_code == CODE_64BIT
- && (i.tm.opcode_modifier & NoRex64) == 0)
- i.rex |= REX_MODE64;
+ && !i.tm.opcode_modifier.norex64)
+ {
+ /* Special case for xchg %rax,%rax. It is NOP and doesn't
+ need rex64. cmpxchg8b is also a special case. */
+ if (! (i.operands == 2
+ && i.tm.base_opcode == 0x90
+ && i.tm.extension_opcode == None
+ && operand_type_equal (&i.types [0], &acc64)
+ && operand_type_equal (&i.types [1], &acc64))
+ && ! (i.operands == 1
+ && i.tm.base_opcode == 0xfc7
+ && i.tm.extension_opcode == 1
+ && !operand_type_check (i.types [0], reg)
+ && operand_type_check (i.types [0], anymem)))
+ i.rex |= REX_W;
+ }
/* Size floating point instruction. */
if (i.suffix == LONG_MNEM_SUFFIX)
- if (i.tm.opcode_modifier & FloatMF)
+ if (i.tm.opcode_modifier.floatmf)
i.tm.base_opcode ^= 4;
}
/* If this is an eight bit register, it's OK. If it's the 16 or
32 bit version of an eight bit register, we will just use the
low portion, and that's OK too. */
- if (i.types[op] & Reg8)
+ if (i.types[op].bitfield.reg8)
+ continue;
+
+ /* Don't generate this warning if not needed. */
+ if (intel_syntax && i.tm.opcode_modifier.byteokintel)
continue;
- /* movzx and movsx should not generate this warning. */
- if (intel_syntax
- && (i.tm.base_opcode == 0xfb7
- || i.tm.base_opcode == 0xfb6
- || i.tm.base_opcode == 0x63
- || i.tm.base_opcode == 0xfbe
- || i.tm.base_opcode == 0xfbf))
+ /* crc32 doesn't generate this warning. */
+ if (i.tm.base_opcode == 0xf20f38f0)
continue;
- if ((i.types[op] & WordReg) && i.op[op].regs->reg_num < 4)
+ if ((i.types[op].bitfield.reg16
+ || i.types[op].bitfield.reg32
+ || i.types[op].bitfield.reg64)
+ && i.op[op].regs->reg_num < 4)
{
/* Prohibit these changes in the 64bit mode, since the
lowering is more complicated. */
if (flag_code == CODE_64BIT
- && (i.tm.operand_types[op] & InOutPortReg) == 0)
+ && !i.tm.operand_types[op].bitfield.inoutportreg)
{
- as_bad (_("Incorrect register `%%%s' used with `%c' suffix"),
- i.op[op].regs->reg_name,
+ as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
+ register_prefix, i.op[op].regs->reg_name,
i.suffix);
return 0;
}
#if REGISTER_WARNINGS
if (!quiet_warnings
- && (i.tm.operand_types[op] & InOutPortReg) == 0)
- as_warn (_("using `%%%s' instead of `%%%s' due to `%c' suffix"),
- (i.op[op].regs + (i.types[op] & Reg16
+ && !i.tm.operand_types[op].bitfield.inoutportreg)
+ as_warn (_("using `%s%s' instead of `%s%s' due to `%c' suffix"),
+ register_prefix,
+ (i.op[op].regs + (i.types[op].bitfield.reg16
? REGNAM_AL - REGNAM_AX
: REGNAM_AL - REGNAM_EAX))->reg_name,
+ register_prefix,
i.op[op].regs->reg_name,
i.suffix);
#endif
continue;
}
/* Any other register is bad. */
- if (i.types[op] & (Reg | RegMMX | RegXMM
- | SReg2 | SReg3
- | Control | Debug | Test
- | FloatReg | FloatAcc))
+ if (i.types[op].bitfield.reg16
+ || i.types[op].bitfield.reg32
+ || i.types[op].bitfield.reg64
+ || i.types[op].bitfield.regmmx
+ || i.types[op].bitfield.regxmm
+ || i.types[op].bitfield.regymm
+ || i.types[op].bitfield.sreg2
+ || i.types[op].bitfield.sreg3
+ || i.types[op].bitfield.control
+ || i.types[op].bitfield.debug
+ || i.types[op].bitfield.test
+ || i.types[op].bitfield.floatreg
+ || i.types[op].bitfield.floatacc)
{
- as_bad (_("`%%%s' not allowed with `%s%c'"),
+ as_bad (_("`%s%s' not allowed with `%s%c'"),
+ register_prefix,
i.op[op].regs->reg_name,
i.tm.name,
i.suffix);
}
static int
-check_long_reg ()
+check_long_reg (void)
{
int op;
for (op = i.operands; --op >= 0;)
/* Reject eight bit registers, except where the template requires
them. (eg. movzb) */
- if ((i.types[op] & Reg8) != 0
- && (i.tm.operand_types[op] & (Reg16 | Reg32 | Acc)) != 0)
+ if (i.types[op].bitfield.reg8
+ && (i.tm.operand_types[op].bitfield.reg16
+ || i.tm.operand_types[op].bitfield.reg32
+ || i.tm.operand_types[op].bitfield.acc))
{
- as_bad (_("`%%%s' not allowed with `%s%c'"),
+ as_bad (_("`%s%s' not allowed with `%s%c'"),
+ register_prefix,
i.op[op].regs->reg_name,
i.tm.name,
i.suffix);
}
/* Warn if the e prefix on a general reg is missing. */
else if ((!quiet_warnings || flag_code == CODE_64BIT)
- && (i.types[op] & Reg16) != 0
- && (i.tm.operand_types[op] & (Reg32 | Acc)) != 0)
+ && i.types[op].bitfield.reg16
+ && (i.tm.operand_types[op].bitfield.reg32
+ || i.tm.operand_types[op].bitfield.acc))
{
/* Prohibit these changes in the 64bit mode, since the
lowering is more complicated. */
if (flag_code == CODE_64BIT)
{
- as_bad (_("Incorrect register `%%%s' used with `%c' suffix"),
- i.op[op].regs->reg_name,
+ as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
+ register_prefix, i.op[op].regs->reg_name,
i.suffix);
return 0;
}
#if REGISTER_WARNINGS
else
- as_warn (_("using `%%%s' instead of `%%%s' due to `%c' suffix"),
+ as_warn (_("using `%s%s' instead of `%s%s' due to `%c' suffix"),
+ register_prefix,
(i.op[op].regs + REGNAM_EAX - REGNAM_AX)->reg_name,
+ register_prefix,
i.op[op].regs->reg_name,
i.suffix);
#endif
}
/* Warn if the r prefix on a general reg is missing. */
- else if ((i.types[op] & Reg64) != 0
- && (i.tm.operand_types[op] & (Reg32 | Acc)) != 0)
+ else if (i.types[op].bitfield.reg64
+ && (i.tm.operand_types[op].bitfield.reg32
+ || i.tm.operand_types[op].bitfield.acc))
{
- as_bad (_("Incorrect register `%%%s' used with `%c' suffix"),
- i.op[op].regs->reg_name,
- i.suffix);
- return 0;
+ if (intel_syntax
+ && i.tm.opcode_modifier.toqword
+ && !i.types[0].bitfield.regxmm)
+ {
+ /* Convert to QWORD. We want REX byte. */
+ i.suffix = QWORD_MNEM_SUFFIX;
+ }
+ else
+ {
+ as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
+ register_prefix, i.op[op].regs->reg_name,
+ i.suffix);
+ return 0;
+ }
}
return 1;
}
static int
-check_qword_reg ()
+check_qword_reg (void)
{
int op;
for (op = i.operands; --op >= 0; )
/* Reject eight bit registers, except where the template requires
them. (eg. movzb) */
- if ((i.types[op] & Reg8) != 0
- && (i.tm.operand_types[op] & (Reg16 | Reg32 | Acc)) != 0)
+ if (i.types[op].bitfield.reg8
+ && (i.tm.operand_types[op].bitfield.reg16
+ || i.tm.operand_types[op].bitfield.reg32
+ || i.tm.operand_types[op].bitfield.acc))
{
- as_bad (_("`%%%s' not allowed with `%s%c'"),
+ as_bad (_("`%s%s' not allowed with `%s%c'"),
+ register_prefix,
i.op[op].regs->reg_name,
i.tm.name,
i.suffix);
return 0;
}
/* Warn if the e prefix on a general reg is missing. */
- else if (((i.types[op] & Reg16) != 0
- || (i.types[op] & Reg32) != 0)
- && (i.tm.operand_types[op] & (Reg32 | Acc)) != 0)
+ else if ((i.types[op].bitfield.reg16
+ || i.types[op].bitfield.reg32)
+ && (i.tm.operand_types[op].bitfield.reg32
+ || i.tm.operand_types[op].bitfield.acc))
{
/* Prohibit these changes in the 64bit mode, since the
lowering is more complicated. */
- as_bad (_("Incorrect register `%%%s' used with `%c' suffix"),
- i.op[op].regs->reg_name,
- i.suffix);
- return 0;
+ if (intel_syntax
+ && i.tm.opcode_modifier.todword
+ && !i.types[0].bitfield.regxmm)
+ {
+ /* Convert to DWORD. We don't want REX byte. */
+ i.suffix = LONG_MNEM_SUFFIX;
+ }
+ else
+ {
+ as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
+ register_prefix, i.op[op].regs->reg_name,
+ i.suffix);
+ return 0;
+ }
}
return 1;
}
static int
-check_word_reg ()
+check_word_reg (void)
{
int op;
for (op = i.operands; --op >= 0;)
/* Reject eight bit registers, except where the template requires
them. (eg. movzb) */
- if ((i.types[op] & Reg8) != 0
- && (i.tm.operand_types[op] & (Reg16 | Reg32 | Acc)) != 0)
+ if (i.types[op].bitfield.reg8
+ && (i.tm.operand_types[op].bitfield.reg16
+ || i.tm.operand_types[op].bitfield.reg32
+ || i.tm.operand_types[op].bitfield.acc))
{
- as_bad (_("`%%%s' not allowed with `%s%c'"),
+ as_bad (_("`%s%s' not allowed with `%s%c'"),
+ register_prefix,
i.op[op].regs->reg_name,
i.tm.name,
i.suffix);
}
/* Warn if the e prefix on a general reg is present. */
else if ((!quiet_warnings || flag_code == CODE_64BIT)
- && (i.types[op] & Reg32) != 0
- && (i.tm.operand_types[op] & (Reg16 | Acc)) != 0)
+ && i.types[op].bitfield.reg32
+ && (i.tm.operand_types[op].bitfield.reg16
+ || i.tm.operand_types[op].bitfield.acc))
{
/* Prohibit these changes in the 64bit mode, since the
lowering is more complicated. */
if (flag_code == CODE_64BIT)
{
- as_bad (_("Incorrect register `%%%s' used with `%c' suffix"),
- i.op[op].regs->reg_name,
+ as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
+ register_prefix, i.op[op].regs->reg_name,
i.suffix);
return 0;
}
else
#if REGISTER_WARNINGS
- as_warn (_("using `%%%s' instead of `%%%s' due to `%c' suffix"),
+ as_warn (_("using `%s%s' instead of `%s%s' due to `%c' suffix"),
+ register_prefix,
(i.op[op].regs + REGNAM_AX - REGNAM_EAX)->reg_name,
+ register_prefix,
i.op[op].regs->reg_name,
i.suffix);
#endif
}
static int
-finalize_imm ()
+update_imm (unsigned int j)
{
- unsigned int overlap0, overlap1, overlap2;
-
- overlap0 = i.types[0] & i.tm.operand_types[0];
- if ((overlap0 & (Imm8 | Imm8S | Imm16 | Imm32 | Imm32S | Imm64))
- && overlap0 != Imm8 && overlap0 != Imm8S
- && overlap0 != Imm16 && overlap0 != Imm32S
- && overlap0 != Imm32 && overlap0 != Imm64)
+ i386_operand_type overlap;
+
+ overlap = operand_type_and (i.types[j], i.tm.operand_types[j]);
+ if ((overlap.bitfield.imm8
+ || overlap.bitfield.imm8s
+ || overlap.bitfield.imm16
+ || overlap.bitfield.imm32
+ || overlap.bitfield.imm32s
+ || overlap.bitfield.imm64)
+ && !operand_type_equal (&overlap, &imm8)
+ && !operand_type_equal (&overlap, &imm8s)
+ && !operand_type_equal (&overlap, &imm16)
+ && !operand_type_equal (&overlap, &imm32)
+ && !operand_type_equal (&overlap, &imm32s)
+ && !operand_type_equal (&overlap, &imm64))
{
if (i.suffix)
{
- overlap0 &= (i.suffix == BYTE_MNEM_SUFFIX
- ? Imm8 | Imm8S
- : (i.suffix == WORD_MNEM_SUFFIX
- ? Imm16
- : (i.suffix == QWORD_MNEM_SUFFIX
- ? Imm64 | Imm32S
- : Imm32)));
- }
- else if (overlap0 == (Imm16 | Imm32S | Imm32)
- || overlap0 == (Imm16 | Imm32)
- || overlap0 == (Imm16 | Imm32S))
- {
- overlap0 = ((flag_code == CODE_16BIT) ^ (i.prefix[DATA_PREFIX] != 0)
- ? Imm16 : Imm32S);
- }
- if (overlap0 != Imm8 && overlap0 != Imm8S
- && overlap0 != Imm16 && overlap0 != Imm32S
- && overlap0 != Imm32 && overlap0 != Imm64)
- {
- as_bad (_("no instruction mnemonic suffix given; can't determine immediate size"));
- return 0;
- }
- }
- i.types[0] = overlap0;
+ i386_operand_type temp;
- overlap1 = i.types[1] & i.tm.operand_types[1];
- if ((overlap1 & (Imm8 | Imm8S | Imm16 | Imm32S | Imm32 | Imm64))
- && overlap1 != Imm8 && overlap1 != Imm8S
- && overlap1 != Imm16 && overlap1 != Imm32S
- && overlap1 != Imm32 && overlap1 != Imm64)
- {
- if (i.suffix)
- {
- overlap1 &= (i.suffix == BYTE_MNEM_SUFFIX
- ? Imm8 | Imm8S
- : (i.suffix == WORD_MNEM_SUFFIX
- ? Imm16
- : (i.suffix == QWORD_MNEM_SUFFIX
- ? Imm64 | Imm32S
- : Imm32)));
+ operand_type_set (&temp, 0);
+ if (i.suffix == BYTE_MNEM_SUFFIX)
+ {
+ temp.bitfield.imm8 = overlap.bitfield.imm8;
+ temp.bitfield.imm8s = overlap.bitfield.imm8s;
+ }
+ else if (i.suffix == WORD_MNEM_SUFFIX)
+ temp.bitfield.imm16 = overlap.bitfield.imm16;
+ else if (i.suffix == QWORD_MNEM_SUFFIX)
+ {
+ temp.bitfield.imm64 = overlap.bitfield.imm64;
+ temp.bitfield.imm32s = overlap.bitfield.imm32s;
+ }
+ else
+ temp.bitfield.imm32 = overlap.bitfield.imm32;
+ overlap = temp;
}
- else if (overlap1 == (Imm16 | Imm32 | Imm32S)
- || overlap1 == (Imm16 | Imm32)
- || overlap1 == (Imm16 | Imm32S))
+ else if (operand_type_equal (&overlap, &imm16_32_32s)
+ || operand_type_equal (&overlap, &imm16_32)
+ || operand_type_equal (&overlap, &imm16_32s))
{
- overlap1 = ((flag_code == CODE_16BIT) ^ (i.prefix[DATA_PREFIX] != 0)
- ? Imm16 : Imm32S);
+ if ((flag_code == CODE_16BIT) ^ (i.prefix[DATA_PREFIX] != 0))
+ overlap = imm16;
+ else
+ overlap = imm32s;
}
- if (overlap1 != Imm8 && overlap1 != Imm8S
- && overlap1 != Imm16 && overlap1 != Imm32S
- && overlap1 != Imm32 && overlap1 != Imm64)
+ if (!operand_type_equal (&overlap, &imm8)
+ && !operand_type_equal (&overlap, &imm8s)
+ && !operand_type_equal (&overlap, &imm16)
+ && !operand_type_equal (&overlap, &imm32)
+ && !operand_type_equal (&overlap, &imm32s)
+ && !operand_type_equal (&overlap, &imm64))
{
- as_bad (_("no instruction mnemonic suffix given; can't determine immediate size %x %c"),overlap1, i.suffix);
+ as_bad (_("no instruction mnemonic suffix given; "
+ "can't determine immediate size"));
return 0;
}
}
- i.types[1] = overlap1;
+ i.types[j] = overlap;
+
+ return 1;
+}
- overlap2 = i.types[2] & i.tm.operand_types[2];
- assert ((overlap2 & Imm) == 0);
- i.types[2] = overlap2;
+static int
+finalize_imm (void)
+{
+ unsigned int j;
+
+ for (j = 0; j < 2; j++)
+ if (update_imm (j) == 0)
+ return 0;
+
+ i.types[2] = operand_type_and (i.types[2], i.tm.operand_types[2]);
+ assert (operand_type_check (i.types[2], imm) == 0);
return 1;
}
static int
-process_operands ()
+bad_implicit_operand (int xmm)
+{
+ const char *reg = xmm ? "xmm0" : "ymm0";
+ if (intel_syntax)
+ as_bad (_("the last operand of `%s' must be `%s%s'"),
+ i.tm.name, register_prefix, reg);
+ else
+ as_bad (_("the first operand of `%s' must be `%s%s'"),
+ i.tm.name, register_prefix, reg);
+ return 0;
+}
+
+static int
+process_operands (void)
{
/* Default segment register this instruction will use for memory
accesses. 0 means unknown. This is only for optimizing out
unnecessary segment overrides. */
const seg_entry *default_seg = 0;
- /* The imul $imm, %reg instruction is converted into
- imul $imm, %reg, %reg, and the clr %reg instruction
- is converted into xor %reg, %reg. */
- if (i.tm.opcode_modifier & regKludge)
+ if (i.tm.opcode_modifier.sse2avx
+ && (i.tm.opcode_modifier.vexnds
+ || i.tm.opcode_modifier.vexndd))
+ {
+ unsigned int dup = i.operands;
+ unsigned int dest = dup - 1;
+ unsigned int j;
+
+ /* The destination must be an xmm register. */
+ assert (i.reg_operands
+ && MAX_OPERANDS > dup
+ && operand_type_equal (&i.types[dest], ®xmm));
+
+ if (i.tm.opcode_modifier.firstxmm0)
+ {
+ /* The first operand is implicit and must be xmm0. */
+ assert (operand_type_equal (&i.types[0], ®xmm));
+ if (i.op[0].regs->reg_num != 0)
+ return bad_implicit_operand (1);
+
+ if (i.tm.opcode_modifier.vex3sources)
+ {
+ /* Keep xmm0 for instructions with VEX prefix and 3
+ sources. */
+ goto duplicate;
+ }
+ else
+ {
+ /* We remove the first xmm0 and keep the number of
+ operands unchanged, which in fact duplicates the
+ destination. */
+ for (j = 1; j < i.operands; j++)
+ {
+ i.op[j - 1] = i.op[j];
+ i.types[j - 1] = i.types[j];
+ i.tm.operand_types[j - 1] = i.tm.operand_types[j];
+ }
+ }
+ }
+ else if (i.tm.opcode_modifier.implicit1stxmm0)
+ {
+ assert ((MAX_OPERANDS - 1) > dup
+ && i.tm.opcode_modifier.vex3sources);
+
+ /* Add the implicit xmm0 for instructions with VEX prefix
+ and 3 sources. */
+ for (j = i.operands; j > 0; j--)
+ {
+ i.op[j] = i.op[j - 1];
+ i.types[j] = i.types[j - 1];
+ i.tm.operand_types[j] = i.tm.operand_types[j - 1];
+ }
+ i.op[0].regs
+ = (const reg_entry *) hash_find (reg_hash, "xmm0");
+ i.types[0] = regxmm;
+ i.tm.operand_types[0] = regxmm;
+
+ i.operands += 2;
+ i.reg_operands += 2;
+ i.tm.operands += 2;
+
+ dup++;
+ dest++;
+ i.op[dup] = i.op[dest];
+ i.types[dup] = i.types[dest];
+ i.tm.operand_types[dup] = i.tm.operand_types[dest];
+ }
+ else
+ {
+duplicate:
+ i.operands++;
+ i.reg_operands++;
+ i.tm.operands++;
+
+ i.op[dup] = i.op[dest];
+ i.types[dup] = i.types[dest];
+ i.tm.operand_types[dup] = i.tm.operand_types[dest];
+ }
+
+ if (i.tm.opcode_modifier.immext)
+ process_immext ();
+ }
+ else if (i.tm.opcode_modifier.firstxmm0)
+ {
+ unsigned int j;
+
+ /* The first operand is implicit and must be xmm0/ymm0. */
+ assert (i.reg_operands
+ && (operand_type_equal (&i.types[0], ®xmm)
+ || operand_type_equal (&i.types[0], ®ymm)));
+ if (i.op[0].regs->reg_num != 0)
+ return bad_implicit_operand (i.types[0].bitfield.regxmm);
+
+ for (j = 1; j < i.operands; j++)
+ {
+ i.op[j - 1] = i.op[j];
+ i.types[j - 1] = i.types[j];
+
+ /* We need to adjust fields in i.tm since they are used by
+ build_modrm_byte. */
+ i.tm.operand_types [j - 1] = i.tm.operand_types [j];
+ }
+
+ i.operands--;
+ i.reg_operands--;
+ i.tm.operands--;
+ }
+ else if (i.tm.opcode_modifier.regkludge)
{
- unsigned int first_reg_op = (i.types[0] & Reg) ? 0 : 1;
+ /* The imul $imm, %reg instruction is converted into
+ imul $imm, %reg, %reg, and the clr %reg instruction
+ is converted into xor %reg, %reg. */
+
+ unsigned int first_reg_op;
+
+ if (operand_type_check (i.types[0], reg))
+ first_reg_op = 0;
+ else
+ first_reg_op = 1;
/* Pretend we saw the extra register operand. */
- assert (i.op[first_reg_op + 1].regs == 0);
+ assert (i.reg_operands == 1
+ && i.op[first_reg_op + 1].regs == 0);
i.op[first_reg_op + 1].regs = i.op[first_reg_op].regs;
i.types[first_reg_op + 1] = i.types[first_reg_op];
- i.reg_operands = 2;
+ i.operands++;
+ i.reg_operands++;
}
- if (i.tm.opcode_modifier & ShortForm)
+ if (i.tm.opcode_modifier.shortform)
{
- /* The register or float register operand is in operand 0 or 1. */
- unsigned int op = (i.types[0] & (Reg | FloatReg)) ? 0 : 1;
- /* Register goes in low 3 bits of opcode. */
- i.tm.base_opcode |= i.op[op].regs->reg_num;
- if ((i.op[op].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_EXTZ;
- if (!quiet_warnings && (i.tm.opcode_modifier & Ugh) != 0)
+ if (i.types[0].bitfield.sreg2
+ || i.types[0].bitfield.sreg3)
{
- /* Warn about some common errors, but press on regardless.
- The first case can be generated by gcc (<= 2.8.1). */
- if (i.operands == 2)
+ if (i.tm.base_opcode == POP_SEG_SHORT
+ && i.op[0].regs->reg_num == 1)
{
- /* Reversed arguments on faddp, fsubp, etc. */
- as_warn (_("translating to `%s %%%s,%%%s'"), i.tm.name,
- i.op[1].regs->reg_name,
- i.op[0].regs->reg_name);
+ as_bad (_("you can't `pop %scs'"), register_prefix);
+ return 0;
}
- else
+ i.tm.base_opcode |= (i.op[0].regs->reg_num << 3);
+ if ((i.op[0].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_B;
+ }
+ else
+ {
+ /* The register or float register operand is in operand
+ 0 or 1. */
+ unsigned int op;
+
+ if (i.types[0].bitfield.floatreg
+ || operand_type_check (i.types[0], reg))
+ op = 0;
+ else
+ op = 1;
+ /* Register goes in low 3 bits of opcode. */
+ i.tm.base_opcode |= i.op[op].regs->reg_num;
+ if ((i.op[op].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_B;
+ if (!quiet_warnings && i.tm.opcode_modifier.ugh)
{
- /* Extraneous `l' suffix on fp insn. */
- as_warn (_("translating to `%s %%%s'"), i.tm.name,
- i.op[0].regs->reg_name);
+ /* Warn about some common errors, but press on regardless.
+ The first case can be generated by gcc (<= 2.8.1). */
+ if (i.operands == 2)
+ {
+ /* Reversed arguments on faddp, fsubp, etc. */
+ as_warn (_("translating to `%s %s%s,%s%s'"), i.tm.name,
+ register_prefix, i.op[!intel_syntax].regs->reg_name,
+ register_prefix, i.op[intel_syntax].regs->reg_name);
+ }
+ else
+ {
+ /* Extraneous `l' suffix on fp insn. */
+ as_warn (_("translating to `%s %s%s'"), i.tm.name,
+ register_prefix, i.op[0].regs->reg_name);
+ }
}
}
}
- else if (i.tm.opcode_modifier & Modrm)
+ else if (i.tm.opcode_modifier.modrm)
{
/* The opcode is completed (modulo i.tm.extension_opcode which
must be put into the modrm byte). Now, we make the modrm and
default_seg = build_modrm_byte ();
}
- else if (i.tm.opcode_modifier & (Seg2ShortForm | Seg3ShortForm))
- {
- if (i.tm.base_opcode == POP_SEG_SHORT
- && i.op[0].regs->reg_num == 1)
- {
- as_bad (_("you can't `pop %%cs'"));
- return 0;
- }
- i.tm.base_opcode |= (i.op[0].regs->reg_num << 3);
- if ((i.op[0].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_EXTZ;
- }
- else if ((i.tm.base_opcode & ~(D | W)) == MOV_AX_DISP32)
+ else if ((i.tm.base_opcode & ~0x3) == MOV_AX_DISP32)
{
default_seg = &ds;
}
- else if ((i.tm.opcode_modifier & IsString) != 0)
+ else if (i.tm.opcode_modifier.isstring)
{
/* For the string instructions that allow a segment override
on one of their operands, the default segment is ds. */
default_seg = &ds;
}
- if ((i.tm.base_opcode == 0x8d /* lea */
- || (i.tm.cpu_flags & CpuSVME))
- && i.seg[0] && !quiet_warnings)
+ if (i.tm.base_opcode == 0x8d /* lea */
+ && i.seg[0]
+ && !quiet_warnings)
as_warn (_("segment override on `%s' is ineffectual"), i.tm.name);
/* If a segment was explicitly specified, and the specified segment
}
static const seg_entry *
-build_modrm_byte ()
+build_modrm_byte (void)
{
const seg_entry *default_seg = 0;
+ unsigned int source, dest;
+ int vex_3_sources;
+
+ /* The first operand of instructions with VEX prefix and 3 sources
+ must be VEX_Imm4. */
+ vex_3_sources = i.tm.opcode_modifier.vex3sources;
+ if (vex_3_sources)
+ {
+ unsigned int nds, reg;
+
+ dest = i.operands - 1;
+ nds = dest - 1;
+ source = 1;
+ reg = 0;
+
+ /* This instruction must have 4 operands: 4 register operands
+ or 3 register operands plus 1 memory operand. It must have
+ VexNDS and VexImmExt. */
+ assert (i.operands == 4
+ && (i.reg_operands == 4
+ || (i.reg_operands == 3 && i.mem_operands == 1))
+ && i.tm.opcode_modifier.vexnds
+ && i.tm.opcode_modifier.veximmext
+ && (operand_type_equal (&i.tm.operand_types[dest],
+ ®xmm)
+ || operand_type_equal (&i.tm.operand_types[dest],
+ ®ymm))
+ && (operand_type_equal (&i.tm.operand_types[nds],
+ ®xmm)
+ || operand_type_equal (&i.tm.operand_types[nds],
+ ®ymm))
+ && (operand_type_equal (&i.tm.operand_types[reg],
+ ®xmm)
+ || operand_type_equal (&i.tm.operand_types[reg],
+ ®ymm)));
+
+ /* Generate an 8bit immediate operand to encode the register
+ operand. */
+ expressionS *exp = &im_expressions[i.imm_operands++];
+ i.op[i.operands].imms = exp;
+ i.types[i.operands] = imm8;
+ i.operands++;
+ exp->X_op = O_constant;
+ exp->X_add_number
+ = ((i.op[0].regs->reg_num
+ + ((i.op[0].regs->reg_flags & RegRex) ? 8 : 0)) << 4);
+
+ i.vex.register_specifier = i.op[nds].regs;
+ }
+ else
+ source = dest = 0;
/* i.reg_operands MUST be the number of real register operands;
- implicit registers do not count. */
- if (i.reg_operands == 2)
- {
- unsigned int source, dest;
- source = ((i.types[0]
- & (Reg | RegMMX | RegXMM
- | SReg2 | SReg3
- | Control | Debug | Test))
- ? 0 : 1);
- dest = source + 1;
+ implicit registers do not count. If there are 3 register
+ operands, it must be a instruction with VexNDS. For a
+ instruction with VexNDD, the destination register is encoded
+ in VEX prefix. If there are 4 register operands, it must be
+ a instruction with VEX prefix and 3 sources. */
+ if (i.mem_operands == 0
+ && ((i.reg_operands == 2
+ && !i.tm.opcode_modifier.vexndd)
+ || (i.reg_operands == 3
+ && i.tm.opcode_modifier.vexnds)
+ || (i.reg_operands == 4 && vex_3_sources)))
+ {
+ switch (i.operands)
+ {
+ case 2:
+ source = 0;
+ break;
+ case 3:
+ /* When there are 3 operands, one of them may be immediate,
+ which may be the first or the last operand. Otherwise,
+ the first operand must be shift count register (cl) or it
+ is an instruction with VexNDS. */
+ assert (i.imm_operands == 1
+ || (i.imm_operands == 0
+ && (i.tm.opcode_modifier.vexnds
+ || i.types[0].bitfield.shiftcount)));
+ if (operand_type_check (i.types[0], imm)
+ || i.types[0].bitfield.shiftcount)
+ source = 1;
+ else
+ source = 0;
+ break;
+ case 4:
+ /* When there are 4 operands, the first two must be 8bit
+ immediate operands. The source operand will be the 3rd
+ one.
+
+ For instructions with VexNDS, if the first operand
+ an imm8, the source operand is the 2nd one. If the last
+ operand is imm8, the source operand is the first one. */
+ assert ((i.imm_operands == 2
+ && i.types[0].bitfield.imm8
+ && i.types[1].bitfield.imm8)
+ || (i.tm.opcode_modifier.vexnds
+ && i.imm_operands == 1
+ && (i.types[0].bitfield.imm8
+ || i.types[i.operands - 1].bitfield.imm8)));
+ if (i.tm.opcode_modifier.vexnds)
+ {
+ if (i.types[0].bitfield.imm8)
+ source = 1;
+ else
+ source = 0;
+ }
+ else
+ source = 2;
+ break;
+ case 5:
+ break;
+ default:
+ abort ();
+ }
+
+ if (!vex_3_sources)
+ {
+ dest = source + 1;
+
+ if (i.tm.opcode_modifier.vexnds)
+ {
+ /* For instructions with VexNDS, the register-only
+ source operand must be XMM or YMM register. It is
+ encoded in VEX prefix. We need to clear RegMem bit
+ before calling operand_type_equal. */
+ i386_operand_type op = i.tm.operand_types[dest];
+ op.bitfield.regmem = 0;
+ if ((dest + 1) >= i.operands
+ || (!operand_type_equal (&op, ®xmm)
+ && !operand_type_equal (&op, ®ymm)))
+ abort ();
+ i.vex.register_specifier = i.op[dest].regs;
+ dest++;
+ }
+ }
i.rm.mode = 3;
/* One of the register operands will be encoded in the i.tm.reg
destination operand, then we assume the source operand may
sometimes be a memory operand and so we need to store the
destination in the i.rm.reg field. */
- if ((i.tm.operand_types[dest] & AnyMem) == 0)
+ if (!i.tm.operand_types[dest].bitfield.regmem
+ && operand_type_check (i.tm.operand_types[dest], anymem) == 0)
{
i.rm.reg = i.op[dest].regs->reg_num;
i.rm.regmem = i.op[source].regs->reg_num;
if ((i.op[dest].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_EXTX;
+ i.rex |= REX_R;
if ((i.op[source].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_EXTZ;
+ i.rex |= REX_B;
}
else
{
i.rm.reg = i.op[source].regs->reg_num;
i.rm.regmem = i.op[dest].regs->reg_num;
if ((i.op[dest].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_EXTZ;
+ i.rex |= REX_B;
if ((i.op[source].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_EXTX;
+ i.rex |= REX_R;
}
- if (flag_code != CODE_64BIT && (i.rex & (REX_EXTX | REX_EXTZ)))
+ if (flag_code != CODE_64BIT && (i.rex & (REX_R | REX_B)))
{
- if (!((i.types[0] | i.types[1]) & Control))
+ if (!i.types[0].bitfield.control
+ && !i.types[1].bitfield.control)
abort ();
- i.rex &= ~(REX_EXTX | REX_EXTZ);
+ i.rex &= ~(REX_R | REX_B);
add_prefix (LOCK_PREFIX_OPCODE);
}
}
else
{ /* If it's not 2 reg operands... */
+ unsigned int mem;
+
if (i.mem_operands)
{
unsigned int fake_zero_displacement = 0;
- unsigned int op = ((i.types[0] & AnyMem)
- ? 0
- : (i.types[1] & AnyMem) ? 1 : 2);
+ unsigned int op;
+
+ for (op = 0; op < i.operands; op++)
+ if (operand_type_check (i.types[op], anymem))
+ break;
+ assert (op < i.operands);
default_seg = &ds;
i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING;
i.sib.base = NO_BASE_REGISTER;
i.sib.index = NO_INDEX_REGISTER;
- i.types[op] = ((i.prefix[ADDR_PREFIX] == 0) ? Disp32S : Disp32);
+ i.types[op] = ((i.prefix[ADDR_PREFIX] == 0)
+ ? disp32s : disp32);
}
- else if ((flag_code == CODE_16BIT) ^ (i.prefix[ADDR_PREFIX] != 0))
+ else if ((flag_code == CODE_16BIT)
+ ^ (i.prefix[ADDR_PREFIX] != 0))
{
i.rm.regmem = NO_BASE_REGISTER_16;
- i.types[op] = Disp16;
+ i.types[op] = disp16;
}
else
{
i.rm.regmem = NO_BASE_REGISTER;
- i.types[op] = Disp32;
+ i.types[op] = disp32;
}
}
else /* !i.base_reg && i.index_reg */
{
- i.sib.index = i.index_reg->reg_num;
+ if (i.index_reg->reg_num == RegEiz
+ || i.index_reg->reg_num == RegRiz)
+ i.sib.index = NO_INDEX_REGISTER;
+ else
+ i.sib.index = i.index_reg->reg_num;
i.sib.base = NO_BASE_REGISTER;
i.sib.scale = i.log2_scale_factor;
i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING;
- i.types[op] &= ~Disp;
+ i.types[op].bitfield.disp8 = 0;
+ i.types[op].bitfield.disp16 = 0;
+ i.types[op].bitfield.disp64 = 0;
if (flag_code != CODE_64BIT)
- i.types[op] |= Disp32; /* Must be 32 bit */
+ {
+ /* Must be 32 bit */
+ i.types[op].bitfield.disp32 = 1;
+ i.types[op].bitfield.disp32s = 0;
+ }
else
- i.types[op] |= Disp32S;
+ {
+ i.types[op].bitfield.disp32 = 0;
+ i.types[op].bitfield.disp32s = 1;
+ }
if ((i.index_reg->reg_flags & RegRex) != 0)
- i.rex |= REX_EXTY;
+ i.rex |= REX_X;
}
}
/* RIP addressing for 64bit mode. */
- else if (i.base_reg->reg_type == BaseIndex)
+ else if (i.base_reg->reg_num == RegRip ||
+ i.base_reg->reg_num == RegEip)
{
i.rm.regmem = NO_BASE_REGISTER;
- i.types[op] &= ~ Disp;
- i.types[op] |= Disp32S;
- i.flags[op] = Operand_PCrel;
+ i.types[op].bitfield.disp8 = 0;
+ i.types[op].bitfield.disp16 = 0;
+ i.types[op].bitfield.disp32 = 0;
+ i.types[op].bitfield.disp32s = 1;
+ i.types[op].bitfield.disp64 = 0;
+ i.flags[op] |= Operand_PCrel;
if (! i.disp_operands)
fake_zero_displacement = 1;
}
- else if (i.base_reg->reg_type & Reg16)
+ else if (i.base_reg->reg_type.bitfield.reg16)
{
switch (i.base_reg->reg_num)
{
if (i.index_reg == 0)
{
i.rm.regmem = 6;
- if ((i.types[op] & Disp) == 0)
+ if (operand_type_check (i.types[op], disp) == 0)
{
/* fake (%bp) into 0(%bp) */
- i.types[op] |= Disp8;
+ i.types[op].bitfield.disp8 = 1;
fake_zero_displacement = 1;
}
}
else /* i.base_reg and 32/64 bit mode */
{
if (flag_code == CODE_64BIT
- && (i.types[op] & Disp))
- i.types[op] = (i.types[op] & Disp8) | (i.prefix[ADDR_PREFIX] == 0 ? Disp32S : Disp32);
+ && operand_type_check (i.types[op], disp))
+ {
+ i386_operand_type temp;
+ operand_type_set (&temp, 0);
+ temp.bitfield.disp8 = i.types[op].bitfield.disp8;
+ i.types[op] = temp;
+ if (i.prefix[ADDR_PREFIX] == 0)
+ i.types[op].bitfield.disp32s = 1;
+ else
+ i.types[op].bitfield.disp32 = 1;
+ }
i.rm.regmem = i.base_reg->reg_num;
if ((i.base_reg->reg_flags & RegRex) != 0)
- i.rex |= REX_EXTZ;
+ i.rex |= REX_B;
i.sib.base = i.base_reg->reg_num;
/* x86-64 ignores REX prefix bit here to avoid decoder
complications. */
if (i.disp_operands == 0)
{
fake_zero_displacement = 1;
- i.types[op] |= Disp8;
+ i.types[op].bitfield.disp8 = 1;
}
}
else if (i.base_reg->reg_num == ESP_REG_NUM)
Any base register besides %esp will not use the
extra modrm byte. */
i.sib.index = NO_INDEX_REGISTER;
-#if !SCALE1_WHEN_NO_INDEX
- /* Another case where we force the second modrm byte. */
- if (i.log2_scale_factor)
- i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING;
-#endif
}
else
{
- i.sib.index = i.index_reg->reg_num;
+ if (i.index_reg->reg_num == RegEiz
+ || i.index_reg->reg_num == RegRiz)
+ i.sib.index = NO_INDEX_REGISTER;
+ else
+ i.sib.index = i.index_reg->reg_num;
i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING;
if ((i.index_reg->reg_flags & RegRex) != 0)
- i.rex |= REX_EXTY;
+ i.rex |= REX_X;
}
- i.rm.mode = mode_from_disp_size (i.types[op]);
+
+ if (i.disp_operands
+ && (i.reloc[op] == BFD_RELOC_386_TLS_DESC_CALL
+ || i.reloc[op] == BFD_RELOC_X86_64_TLSDESC_CALL))
+ i.rm.mode = 0;
+ else
+ i.rm.mode = mode_from_disp_size (i.types[op]);
}
if (fake_zero_displacement)
exp->X_add_symbol = (symbolS *) 0;
exp->X_op_symbol = (symbolS *) 0;
}
+
+ mem = op;
}
+ else
+ mem = ~0;
/* Fill in i.rm.reg or i.rm.regmem field with register operand
(if any) based on i.tm.extension_opcode. Again, we must be
registers are coded into the i.rm.reg field. */
if (i.reg_operands)
{
- unsigned int op =
- ((i.types[0]
- & (Reg | RegMMX | RegXMM
- | SReg2 | SReg3
- | Control | Debug | Test))
- ? 0
- : ((i.types[1]
- & (Reg | RegMMX | RegXMM
- | SReg2 | SReg3
- | Control | Debug | Test))
- ? 1
- : 2));
- /* If there is an extension opcode to put here, the register
- number must be put into the regmem field. */
- if (i.tm.extension_opcode != None)
- {
- i.rm.regmem = i.op[op].regs->reg_num;
- if ((i.op[op].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_EXTZ;
- }
- else
- {
- i.rm.reg = i.op[op].regs->reg_num;
- if ((i.op[op].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_EXTX;
- }
+ unsigned int op;
+ unsigned int vex_reg = ~0;
+
+ for (op = 0; op < i.operands; op++)
+ if (i.types[op].bitfield.reg8
+ || i.types[op].bitfield.reg16
+ || i.types[op].bitfield.reg32
+ || i.types[op].bitfield.reg64
+ || i.types[op].bitfield.regmmx
+ || i.types[op].bitfield.regxmm
+ || i.types[op].bitfield.regymm
+ || i.types[op].bitfield.sreg2
+ || i.types[op].bitfield.sreg3
+ || i.types[op].bitfield.control
+ || i.types[op].bitfield.debug
+ || i.types[op].bitfield.test)
+ break;
+
+ if (vex_3_sources)
+ op = dest;
+ else if (i.tm.opcode_modifier.vexnds)
+ {
+ /* For instructions with VexNDS, the register-only
+ source operand is encoded in VEX prefix. */
+ assert (mem != (unsigned int) ~0);
+
+ if (op > mem)
+ {
+ vex_reg = op++;
+ assert (op < i.operands);
+ }
+ else
+ {
+ vex_reg = op + 1;
+ assert (vex_reg < i.operands);
+ }
+ }
+ else if (i.tm.opcode_modifier.vexndd)
+ {
+ /* For instructions with VexNDD, there should be
+ no memory operand and the register destination
+ is encoded in VEX prefix. */
+ assert (i.mem_operands == 0
+ && (op + 2) == i.operands);
+ vex_reg = op + 1;
+ }
+ else
+ assert (op < i.operands);
+
+ if (vex_reg != (unsigned int) ~0)
+ {
+ assert (i.reg_operands == 2);
+
+ if (!operand_type_equal (&i.tm.operand_types[vex_reg],
+ & regxmm)
+ && !operand_type_equal (&i.tm.operand_types[vex_reg],
+ ®ymm))
+ abort ();
+ i.vex.register_specifier = i.op[vex_reg].regs;
+ }
+
+ /* If there is an extension opcode to put here, the
+ register number must be put into the regmem field. */
+ if (i.tm.extension_opcode != None)
+ {
+ i.rm.regmem = i.op[op].regs->reg_num;
+ if ((i.op[op].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_B;
+ }
+ else
+ {
+ i.rm.reg = i.op[op].regs->reg_num;
+ if ((i.op[op].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_R;
+ }
/* Now, if no memory operand has set i.rm.mode = 0, 1, 2 we
must set it to 3 to indicate this is a register operand
}
static void
-output_branch ()
+output_branch (void)
{
char *p;
int code16;
if ((unsigned char) *p == JUMP_PC_RELATIVE)
subtype = ENCODE_RELAX_STATE (UNCOND_JUMP, SMALL);
- else if ((cpu_arch_flags & Cpu386) != 0)
+ else if (cpu_arch_flags.bitfield.cpui386)
subtype = ENCODE_RELAX_STATE (COND_JUMP, SMALL);
else
subtype = ENCODE_RELAX_STATE (COND_JUMP86, SMALL);
}
static void
-output_jump ()
+output_jump (void)
{
char *p;
int size;
fixS *fixP;
- if (i.tm.opcode_modifier & JumpByte)
+ if (i.tm.opcode_modifier.jumpbyte)
{
/* This is a loop or jecxz type instruction. */
size = 1;
}
static void
-output_interseg_jump ()
+output_interseg_jump (void)
{
char *p;
int size;
}
static void
-output_insn ()
+output_insn (void)
{
fragS *insn_start_frag;
offsetT insn_start_off;
insn_start_off = frag_now_fix ();
/* Output jumps. */
- if (i.tm.opcode_modifier & Jump)
+ if (i.tm.opcode_modifier.jump)
output_branch ();
- else if (i.tm.opcode_modifier & (JumpByte | JumpDword))
+ else if (i.tm.opcode_modifier.jumpbyte
+ || i.tm.opcode_modifier.jumpdword)
output_jump ();
- else if (i.tm.opcode_modifier & JumpInterSegment)
+ else if (i.tm.opcode_modifier.jumpintersegment)
output_interseg_jump ();
else
{
/* Output normal instructions here. */
char *p;
unsigned char *q;
+ unsigned int j;
+ unsigned int prefix;
- /* All opcodes on i386 have either 1 or 2 bytes. We may use one
- more higher byte to specify a prefix the instruction
- requires. */
- if ((i.tm.base_opcode & 0xff0000) != 0)
+ /* Since the VEX prefix contains the implicit prefix, we don't
+ need the explicit prefix. */
+ if (!i.tm.opcode_modifier.vex)
{
- if ((i.tm.cpu_flags & CpuPadLock) != 0)
+ switch (i.tm.opcode_length)
{
- unsigned int prefix;
- prefix = (i.tm.base_opcode >> 16) & 0xff;
-
- if (prefix != REPE_PREFIX_OPCODE
- || i.prefix[LOCKREP_PREFIX] != REPE_PREFIX_OPCODE)
- add_prefix (prefix);
+ case 3:
+ if (i.tm.base_opcode & 0xff000000)
+ {
+ prefix = (i.tm.base_opcode >> 24) & 0xff;
+ goto check_prefix;
+ }
+ break;
+ case 2:
+ if ((i.tm.base_opcode & 0xff0000) != 0)
+ {
+ prefix = (i.tm.base_opcode >> 16) & 0xff;
+ if (i.tm.cpu_flags.bitfield.cpupadlock)
+ {
+check_prefix:
+ if (prefix != REPE_PREFIX_OPCODE
+ || (i.prefix[LOCKREP_PREFIX]
+ != REPE_PREFIX_OPCODE))
+ add_prefix (prefix);
+ }
+ else
+ add_prefix (prefix);
+ }
+ break;
+ case 1:
+ break;
+ default:
+ abort ();
}
- else
- add_prefix ((i.tm.base_opcode >> 16) & 0xff);
+
+ /* The prefix bytes. */
+ for (j = ARRAY_SIZE (i.prefix), q = i.prefix; j > 0; j--, q++)
+ if (*q)
+ FRAG_APPEND_1_CHAR (*q);
}
- /* The prefix bytes. */
- for (q = i.prefix;
- q < i.prefix + sizeof (i.prefix) / sizeof (i.prefix[0]);
- q++)
+ if (i.tm.opcode_modifier.vex)
{
- if (*q)
- {
- p = frag_more (1);
- md_number_to_chars (p, (valueT) *q, 1);
- }
+ for (j = 0, q = i.prefix; j < ARRAY_SIZE (i.prefix); j++, q++)
+ if (*q)
+ switch (j)
+ {
+ case REX_PREFIX:
+ /* REX byte is encoded in VEX prefix. */
+ break;
+ case SEG_PREFIX:
+ case ADDR_PREFIX:
+ FRAG_APPEND_1_CHAR (*q);
+ break;
+ default:
+ /* There should be no other prefixes for instructions
+ with VEX prefix. */
+ abort ();
+ }
+
+ /* Now the VEX prefix. */
+ p = frag_more (i.vex.length);
+ for (j = 0; j < i.vex.length; j++)
+ p[j] = i.vex.bytes[j];
}
/* Now the opcode; be careful about word order here! */
- if (fits_in_unsigned_byte (i.tm.base_opcode))
+ if (i.tm.opcode_length == 1)
{
FRAG_APPEND_1_CHAR (i.tm.base_opcode);
}
else
{
- p = frag_more (2);
+ switch (i.tm.opcode_length)
+ {
+ case 3:
+ p = frag_more (3);
+ *p++ = (i.tm.base_opcode >> 16) & 0xff;
+ break;
+ case 2:
+ p = frag_more (2);
+ break;
+ default:
+ abort ();
+ break;
+ }
/* Put out high byte first: can't use md_number_to_chars! */
*p++ = (i.tm.base_opcode >> 8) & 0xff;
}
/* Now the modrm byte and sib byte (if present). */
- if (i.tm.opcode_modifier & Modrm)
+ if (i.tm.opcode_modifier.modrm)
{
- p = frag_more (1);
- md_number_to_chars (p,
- (valueT) (i.rm.regmem << 0
- | i.rm.reg << 3
- | i.rm.mode << 6),
- 1);
+ FRAG_APPEND_1_CHAR ((i.rm.regmem << 0
+ | i.rm.reg << 3
+ | i.rm.mode << 6));
/* If i.rm.regmem == ESP (4)
&& i.rm.mode != (Register mode)
&& not 16 bit
==> need second modrm byte. */
if (i.rm.regmem == ESCAPE_TO_TWO_BYTE_ADDRESSING
&& i.rm.mode != 3
- && !(i.base_reg && (i.base_reg->reg_type & Reg16) != 0))
- {
- p = frag_more (1);
- md_number_to_chars (p,
- (valueT) (i.sib.base << 0
- | i.sib.index << 3
- | i.sib.scale << 6),
- 1);
- }
+ && !(i.base_reg && i.base_reg->reg_type.bitfield.reg16))
+ FRAG_APPEND_1_CHAR ((i.sib.base << 0
+ | i.sib.index << 3
+ | i.sib.scale << 6));
}
if (i.disp_operands)
#ifdef DEBUG386
if (flag_debug)
{
- pi (line, &i);
+ pi ("" /*line*/, &i);
}
#endif /* DEBUG386 */
}
+/* Return the size of the displacement operand N. */
+
+static int
+disp_size (unsigned int n)
+{
+ int size = 4;
+ if (i.types[n].bitfield.disp64)
+ size = 8;
+ else if (i.types[n].bitfield.disp8)
+ size = 1;
+ else if (i.types[n].bitfield.disp16)
+ size = 2;
+ return size;
+}
+
+/* Return the size of the immediate operand N. */
+
+static int
+imm_size (unsigned int n)
+{
+ int size = 4;
+ if (i.types[n].bitfield.imm64)
+ size = 8;
+ else if (i.types[n].bitfield.imm8 || i.types[n].bitfield.imm8s)
+ size = 1;
+ else if (i.types[n].bitfield.imm16)
+ size = 2;
+ return size;
+}
+
static void
-output_disp (insn_start_frag, insn_start_off)
- fragS *insn_start_frag;
- offsetT insn_start_off;
+output_disp (fragS *insn_start_frag, offsetT insn_start_off)
{
char *p;
unsigned int n;
for (n = 0; n < i.operands; n++)
{
- if (i.types[n] & Disp)
+ if (operand_type_check (i.types[n], disp))
{
if (i.op[n].disps->X_op == O_constant)
{
- int size;
+ int size = disp_size (n);
offsetT val;
- size = 4;
- if (i.types[n] & (Disp8 | Disp16 | Disp64))
- {
- size = 2;
- if (i.types[n] & Disp8)
- size = 1;
- if (i.types[n] & Disp64)
- size = 8;
- }
val = offset_in_range (i.op[n].disps->X_add_number,
size);
p = frag_more (size);
else
{
enum bfd_reloc_code_real reloc_type;
- int size = 4;
- int sign = 0;
+ int size = disp_size (n);
+ int sign = i.types[n].bitfield.disp32s;
int pcrel = (i.flags[n] & Operand_PCrel) != 0;
+ /* We can't have 8 bit displacement here. */
+ assert (!i.types[n].bitfield.disp8);
+
/* The PC relative address is computed relative
to the instruction boundary, so in case immediate
fields follows, we need to adjust the value. */
if (pcrel && i.imm_operands)
{
- int imm_size = 4;
unsigned int n1;
+ int sz = 0;
for (n1 = 0; n1 < i.operands; n1++)
- if (i.types[n1] & Imm)
+ if (operand_type_check (i.types[n1], imm))
{
- if (i.types[n1] & (Imm8 | Imm8S | Imm16 | Imm64))
- {
- imm_size = 2;
- if (i.types[n1] & (Imm8 | Imm8S))
- imm_size = 1;
- if (i.types[n1] & Imm64)
- imm_size = 8;
- }
- break;
+ /* Only one immediate is allowed for PC
+ relative address. */
+ assert (sz == 0);
+ sz = imm_size (n1);
+ i.op[n].disps->X_add_number -= sz;
}
/* We should find the immediate. */
- if (n1 == i.operands)
- abort ();
- i.op[n].disps->X_add_number -= imm_size;
- }
-
- if (i.types[n] & Disp32S)
- sign = 1;
-
- if (i.types[n] & (Disp16 | Disp64))
- {
- size = 2;
- if (i.types[n] & Disp64)
- size = 8;
+ assert (sz != 0);
}
p = frag_more (size);
if (GOT_symbol
&& GOT_symbol == i.op[n].disps->X_add_symbol
&& (((reloc_type == BFD_RELOC_32
- || reloc_type == BFD_RELOC_X86_64_32S)
+ || reloc_type == BFD_RELOC_X86_64_32S
+ || (reloc_type == BFD_RELOC_64
+ && object_64bit))
&& (i.op[n].disps->X_op == O_symbol
|| (i.op[n].disps->X_op == O_add
&& ((symbol_get_value_expression
}
if (!object_64bit)
- reloc_type = BFD_RELOC_386_GOTPC;
+ {
+ reloc_type = BFD_RELOC_386_GOTPC;
+ i.op[n].imms->X_add_number += add;
+ }
+ else if (reloc_type == BFD_RELOC_64)
+ reloc_type = BFD_RELOC_X86_64_GOTPC64;
else
+ /* Don't do the adjustment for x86-64, as there
+ the pcrel addressing is relative to the _next_
+ insn, and that is taken care of in other code. */
reloc_type = BFD_RELOC_X86_64_GOTPC32;
- i.op[n].disps->X_add_number += add;
}
fix_new_exp (frag_now, p - frag_now->fr_literal, size,
i.op[n].disps, pcrel, reloc_type);
}
static void
-output_imm (insn_start_frag, insn_start_off)
- fragS *insn_start_frag;
- offsetT insn_start_off;
+output_imm (fragS *insn_start_frag, offsetT insn_start_off)
{
char *p;
unsigned int n;
for (n = 0; n < i.operands; n++)
{
- if (i.types[n] & Imm)
+ if (operand_type_check (i.types[n], imm))
{
if (i.op[n].imms->X_op == O_constant)
{
- int size;
+ int size = imm_size (n);
offsetT val;
- size = 4;
- if (i.types[n] & (Imm8 | Imm8S | Imm16 | Imm64))
- {
- size = 2;
- if (i.types[n] & (Imm8 | Imm8S))
- size = 1;
- else if (i.types[n] & Imm64)
- size = 8;
- }
val = offset_in_range (i.op[n].imms->X_add_number,
size);
p = frag_more (size);
non-absolute imms). Try to support other
sizes ... */
enum bfd_reloc_code_real reloc_type;
- int size = 4;
- int sign = 0;
+ int size = imm_size (n);
+ int sign;
- if ((i.types[n] & (Imm32S))
+ if (i.types[n].bitfield.imm32s
&& (i.suffix == QWORD_MNEM_SUFFIX
- || (!i.suffix && (i.tm.opcode_modifier & No_lSuf))))
+ || (!i.suffix && i.tm.opcode_modifier.no_lsuf)))
sign = 1;
- if (i.types[n] & (Imm8 | Imm8S | Imm16 | Imm64))
- {
- size = 2;
- if (i.types[n] & (Imm8 | Imm8S))
- size = 1;
- if (i.types[n] & Imm64)
- size = 8;
- }
+ else
+ sign = 0;
p = frag_more (size);
reloc_type = reloc (size, 0, sign, i.reloc[n]);
* confusing to do it this way. */
if ((reloc_type == BFD_RELOC_32
- || reloc_type == BFD_RELOC_X86_64_32S)
+ || reloc_type == BFD_RELOC_X86_64_32S
+ || reloc_type == BFD_RELOC_64)
&& GOT_symbol
&& GOT_symbol == i.op[n].imms->X_add_symbol
&& (i.op[n].imms->X_op == O_symbol
if (!object_64bit)
reloc_type = BFD_RELOC_386_GOTPC;
- else
+ else if (size == 4)
reloc_type = BFD_RELOC_X86_64_GOTPC32;
+ else if (size == 8)
+ reloc_type = BFD_RELOC_X86_64_GOTPC64;
i.op[n].imms->X_add_number += add;
}
fix_new_exp (frag_now, p - frag_now->fr_literal, size,
}
}
\f
+/* x86_cons_fix_new is called via the expression parsing code when a
+ reloc is needed. We use this hook to get the correct .got reloc. */
+static enum bfd_reloc_code_real got_reloc = NO_RELOC;
+static int cons_sign = -1;
+
+void
+x86_cons_fix_new (fragS *frag, unsigned int off, unsigned int len,
+ expressionS *exp)
+{
+ enum bfd_reloc_code_real r = reloc (len, 0, cons_sign, got_reloc);
+
+ got_reloc = NO_RELOC;
+
+#ifdef TE_PE
+ if (exp->X_op == O_secrel)
+ {
+ exp->X_op = O_symbol;
+ r = BFD_RELOC_32_SECREL;
+ }
+#endif
+
+ fix_new_exp (frag, off, len, exp, 0, r);
+}
+
#if (!defined (OBJ_ELF) && !defined (OBJ_MAYBE_ELF)) || defined (LEX_AT)
# define lex_got(reloc, adjust, types) NULL
#else
input line. Otherwise return NULL. */
static char *
lex_got (enum bfd_reloc_code_real *reloc,
- int *adjust,
- unsigned int *types)
+ int *adjust,
+ i386_operand_type *types)
{
+ /* Some of the relocations depend on the size of what field is to
+ be relocated. But in our callers i386_immediate and i386_displacement
+ we don't yet know the operand size (this will be set by insn
+ matching). Hence we record the word32 relocation here,
+ and adjust the reloc according to the real size in reloc(). */
static const struct {
const char *str;
const enum bfd_reloc_code_real rel[2];
- const unsigned int types64;
+ const i386_operand_type types64;
} gotrel[] = {
- { "PLT", { BFD_RELOC_386_PLT32, BFD_RELOC_X86_64_PLT32 }, Imm32|Imm32S|Disp32 },
- { "GOTOFF", { BFD_RELOC_386_GOTOFF, BFD_RELOC_X86_64_GOTOFF64 }, Imm64|Disp64 },
- { "GOTPCREL", { 0, BFD_RELOC_X86_64_GOTPCREL }, Imm32|Imm32S|Disp32 },
- { "TLSGD", { BFD_RELOC_386_TLS_GD, BFD_RELOC_X86_64_TLSGD }, Imm32|Imm32S|Disp32 },
- { "TLSLDM", { BFD_RELOC_386_TLS_LDM, 0 }, 0 },
- { "TLSLD", { 0, BFD_RELOC_X86_64_TLSLD }, Imm32|Imm32S|Disp32 },
- { "GOTTPOFF", { BFD_RELOC_386_TLS_IE_32, BFD_RELOC_X86_64_GOTTPOFF }, Imm32|Imm32S|Disp32 },
- { "TPOFF", { BFD_RELOC_386_TLS_LE_32, BFD_RELOC_X86_64_TPOFF32 }, Imm32|Imm32S|Imm64|Disp32|Disp64 },
- { "NTPOFF", { BFD_RELOC_386_TLS_LE, 0 }, 0 },
- { "DTPOFF", { BFD_RELOC_386_TLS_LDO_32, BFD_RELOC_X86_64_DTPOFF32 }, Imm32|Imm32S|Imm64|Disp32|Disp64 },
- { "GOTNTPOFF",{ BFD_RELOC_386_TLS_GOTIE, 0 }, 0 },
- { "INDNTPOFF",{ BFD_RELOC_386_TLS_IE, 0 }, 0 },
- { "GOT", { BFD_RELOC_386_GOT32, BFD_RELOC_X86_64_GOT32 }, Imm32|Imm32S|Disp32 }
+ { "PLTOFF", { 0,
+ BFD_RELOC_X86_64_PLTOFF64 },
+ OPERAND_TYPE_IMM64 },
+ { "PLT", { BFD_RELOC_386_PLT32,
+ BFD_RELOC_X86_64_PLT32 },
+ OPERAND_TYPE_IMM32_32S_DISP32 },
+ { "GOTPLT", { 0,
+ BFD_RELOC_X86_64_GOTPLT64 },
+ OPERAND_TYPE_IMM64_DISP64 },
+ { "GOTOFF", { BFD_RELOC_386_GOTOFF,
+ BFD_RELOC_X86_64_GOTOFF64 },
+ OPERAND_TYPE_IMM64_DISP64 },
+ { "GOTPCREL", { 0,
+ BFD_RELOC_X86_64_GOTPCREL },
+ OPERAND_TYPE_IMM32_32S_DISP32 },
+ { "TLSGD", { BFD_RELOC_386_TLS_GD,
+ BFD_RELOC_X86_64_TLSGD },
+ OPERAND_TYPE_IMM32_32S_DISP32 },
+ { "TLSLDM", { BFD_RELOC_386_TLS_LDM,
+ 0 },
+ OPERAND_TYPE_NONE },
+ { "TLSLD", { 0,
+ BFD_RELOC_X86_64_TLSLD },
+ OPERAND_TYPE_IMM32_32S_DISP32 },
+ { "GOTTPOFF", { BFD_RELOC_386_TLS_IE_32,
+ BFD_RELOC_X86_64_GOTTPOFF },
+ OPERAND_TYPE_IMM32_32S_DISP32 },
+ { "TPOFF", { BFD_RELOC_386_TLS_LE_32,
+ BFD_RELOC_X86_64_TPOFF32 },
+ OPERAND_TYPE_IMM32_32S_64_DISP32_64 },
+ { "NTPOFF", { BFD_RELOC_386_TLS_LE,
+ 0 },
+ OPERAND_TYPE_NONE },
+ { "DTPOFF", { BFD_RELOC_386_TLS_LDO_32,
+ BFD_RELOC_X86_64_DTPOFF32 },
+
+ OPERAND_TYPE_IMM32_32S_64_DISP32_64 },
+ { "GOTNTPOFF",{ BFD_RELOC_386_TLS_GOTIE,
+ 0 },
+ OPERAND_TYPE_NONE },
+ { "INDNTPOFF",{ BFD_RELOC_386_TLS_IE,
+ 0 },
+ OPERAND_TYPE_NONE },
+ { "GOT", { BFD_RELOC_386_GOT32,
+ BFD_RELOC_X86_64_GOT32 },
+ OPERAND_TYPE_IMM32_32S_64_DISP32 },
+ { "TLSDESC", { BFD_RELOC_386_TLS_GOTDESC,
+ BFD_RELOC_X86_64_GOTPC32_TLSDESC },
+ OPERAND_TYPE_IMM32_32S_DISP32 },
+ { "TLSCALL", { BFD_RELOC_386_TLS_DESC_CALL,
+ BFD_RELOC_X86_64_TLSDESC_CALL },
+ OPERAND_TYPE_IMM32_32S_DISP32 },
};
char *cp;
unsigned int j;
return NULL;
for (cp = input_line_pointer; *cp != '@'; cp++)
- if (is_end_of_line[(unsigned char) *cp])
+ if (is_end_of_line[(unsigned char) *cp] || *cp == ',')
return NULL;
- for (j = 0; j < sizeof (gotrel) / sizeof (gotrel[0]); j++)
+ for (j = 0; j < ARRAY_SIZE (gotrel); j++)
{
int len;
if (types)
{
if (flag_code != CODE_64BIT)
- *types = Imm32|Disp32;
+ {
+ types->bitfield.imm32 = 1;
+ types->bitfield.disp32 = 1;
+ }
else
*types = gotrel[j].types64;
}
if (GOT_symbol == NULL)
GOT_symbol = symbol_find_or_make (GLOBAL_OFFSET_TABLE_NAME);
- /* Replace the relocation token with ' ', so that
- errors like foo@GOTOFF1 will be detected. */
-
/* The length of the first part of our input line. */
first = cp - input_line_pointer;
/* The second part goes from after the reloc token until
- (and including) an end_of_line char. Don't use strlen
- here as the end_of_line char may not be a NUL. */
+ (and including) an end_of_line char or comma. */
past_reloc = cp + 1 + len;
- for (cp = past_reloc; !is_end_of_line[(unsigned char) *cp++]; )
- ;
- second = cp - past_reloc;
+ cp = past_reloc;
+ while (!is_end_of_line[(unsigned char) *cp] && *cp != ',')
+ ++cp;
+ second = cp + 1 - past_reloc;
/* Allocate and copy string. The trailing NUL shouldn't
be necessary, but be safe. */
tmpbuf = xmalloc (first + second + 2);
memcpy (tmpbuf, input_line_pointer, first);
- tmpbuf[first] = ' ';
- memcpy (tmpbuf + first + 1, past_reloc, second);
- tmpbuf[first + second + 1] = '\0';
+ if (second != 0 && *past_reloc != ' ')
+ /* Replace the relocation token with ' ', so that
+ errors like foo@GOTOFF1 will be detected. */
+ tmpbuf[first++] = ' ';
+ memcpy (tmpbuf + first, past_reloc, second);
+ tmpbuf[first + second] = '\0';
return tmpbuf;
}
return NULL;
}
-/* x86_cons_fix_new is called via the expression parsing code when a
- reloc is needed. We use this hook to get the correct .got reloc. */
-static enum bfd_reloc_code_real got_reloc = NO_RELOC;
-
void
-x86_cons_fix_new (frag, off, len, exp)
- fragS *frag;
- unsigned int off;
- unsigned int len;
- expressionS *exp;
+x86_cons (expressionS *exp, int size)
{
- enum bfd_reloc_code_real r = reloc (len, 0, -1, got_reloc);
- got_reloc = NO_RELOC;
- fix_new_exp (frag, off, len, exp, 0, r);
-}
+ intel_syntax = -intel_syntax;
-void
-x86_cons (exp, size)
- expressionS *exp;
- int size;
-{
if (size == 4 || (object_64bit && size == 8))
{
/* Handle @GOTOFF and the like in an expression. */
+ (input_line_pointer - gotfree_input_line)
+ adjust);
free (gotfree_input_line);
+ if (exp->X_op == O_constant
+ || exp->X_op == O_absent
+ || exp->X_op == O_illegal
+ || exp->X_op == O_register
+ || exp->X_op == O_big)
+ {
+ char c = *input_line_pointer;
+ *input_line_pointer = 0;
+ as_bad (_("missing or invalid expression `%s'"), save);
+ *input_line_pointer = c;
+ }
}
}
else
expression (exp);
+
+ intel_syntax = -intel_syntax;
+
+ if (intel_syntax)
+ i386_intel_simplify (exp);
}
#endif
-#ifdef TE_PE
-
-void
-x86_pe_cons_fix_new (frag, off, len, exp)
- fragS *frag;
- unsigned int off;
- unsigned int len;
- expressionS *exp;
+static void signed_cons (int size)
{
- enum bfd_reloc_code_real r = reloc (len, 0, -1, NO_RELOC);
-
- if (exp->X_op == O_secrel)
- {
- exp->X_op = O_symbol;
- r = BFD_RELOC_32_SECREL;
- }
-
- fix_new_exp (frag, off, len, exp, 0, r);
+ if (flag_code == CODE_64BIT)
+ cons_sign = 1;
+ cons (size);
+ cons_sign = -1;
}
+#ifdef TE_PE
static void
pe_directive_secrel (dummy)
int dummy ATTRIBUTE_UNUSED;
input_line_pointer--;
demand_empty_rest_of_line ();
}
-
#endif
-static int i386_immediate PARAMS ((char *));
-
static int
-i386_immediate (imm_start)
- char *imm_start;
+i386_immediate (char *imm_start)
{
char *save_input_line_pointer;
char *gotfree_input_line;
segT exp_seg = 0;
expressionS *exp;
- unsigned int types = ~0U;
+ i386_operand_type types;
+
+ operand_type_set (&types, ~0);
if (i.imm_operands == MAX_IMMEDIATE_OPERANDS)
{
- as_bad (_("only 1 or 2 immediate operands are allowed"));
+ as_bad (_("at most %d immediate operands are allowed"),
+ MAX_IMMEDIATE_OPERANDS);
return 0;
}
input_line_pointer = save_input_line_pointer;
if (gotfree_input_line)
- free (gotfree_input_line);
+ {
+ free (gotfree_input_line);
- if (exp->X_op == O_absent || exp->X_op == O_big)
+ if (exp->X_op == O_constant || exp->X_op == O_register)
+ exp->X_op = O_illegal;
+ }
+
+ return i386_finalize_immediate (exp_seg, exp, types, imm_start);
+}
+
+static int
+i386_finalize_immediate (segT exp_seg ATTRIBUTE_UNUSED, expressionS *exp,
+ i386_operand_type types, const char *imm_start)
+{
+ if (exp->X_op == O_absent || exp->X_op == O_illegal || exp->X_op == O_big)
{
- /* Missing or bad expr becomes absolute 0. */
- as_bad (_("missing or invalid immediate expression `%s' taken as 0"),
+ as_bad (_("missing or invalid immediate expression `%s'"),
imm_start);
- exp->X_op = O_constant;
- exp->X_add_number = 0;
- exp->X_add_symbol = (symbolS *) 0;
- exp->X_op_symbol = (symbolS *) 0;
+ return 0;
}
else if (exp->X_op == O_constant)
{
/* Size it properly later. */
- i.types[this_operand] |= Imm64;
+ i.types[this_operand].bitfield.imm64 = 1;
/* If BFD64, sign extend val. */
- if (!use_rela_relocations)
- if ((exp->X_add_number & ~(((addressT) 2 << 31) - 1)) == 0)
- exp->X_add_number = (exp->X_add_number ^ ((addressT) 1 << 31)) - ((addressT) 1 << 31);
+ if (!use_rela_relocations
+ && (exp->X_add_number & ~(((addressT) 2 << 31) - 1)) == 0)
+ exp->X_add_number
+ = (exp->X_add_number ^ ((addressT) 1 << 31)) - ((addressT) 1 << 31);
}
#if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
else if (OUTPUT_FLAVOR == bfd_target_aout_flavour
return 0;
}
#endif
+ else if (!intel_syntax && exp->X_op == O_register)
+ {
+ as_bad (_("illegal immediate register operand %s"), imm_start);
+ return 0;
+ }
else
{
/* This is an address. The size of the address will be
determined later, depending on destination register,
suffix, or the default for the section. */
- i.types[this_operand] |= Imm8 | Imm16 | Imm32 | Imm32S | Imm64;
- i.types[this_operand] &= types;
+ i.types[this_operand].bitfield.imm8 = 1;
+ i.types[this_operand].bitfield.imm16 = 1;
+ i.types[this_operand].bitfield.imm32 = 1;
+ i.types[this_operand].bitfield.imm32s = 1;
+ i.types[this_operand].bitfield.imm64 = 1;
+ i.types[this_operand] = operand_type_and (i.types[this_operand],
+ types);
}
return 1;
}
-static char *i386_scale PARAMS ((char *));
-
static char *
-i386_scale (scale)
- char *scale;
+i386_scale (char *scale)
{
offsetT val;
char *save = input_line_pointer;
{
as_warn (_("scale factor of %d without an index register"),
1 << i.log2_scale_factor);
-#if SCALE1_WHEN_NO_INDEX
i.log2_scale_factor = 0;
-#endif
}
scale = input_line_pointer;
input_line_pointer = save;
return scale;
}
-static int i386_displacement PARAMS ((char *, char *));
-
static int
-i386_displacement (disp_start, disp_end)
- char *disp_start;
- char *disp_end;
+i386_displacement (char *disp_start, char *disp_end)
{
expressionS *exp;
segT exp_seg = 0;
char *save_input_line_pointer;
char *gotfree_input_line;
- int bigdisp = Disp32;
- unsigned int types = Disp;
+ int override;
+ i386_operand_type bigdisp, types = anydisp;
+ int ret;
- if (flag_code == CODE_64BIT)
+ if (i.disp_operands == MAX_MEMORY_OPERANDS)
+ {
+ as_bad (_("at most %d displacement operands are allowed"),
+ MAX_MEMORY_OPERANDS);
+ return 0;
+ }
+
+ operand_type_set (&bigdisp, 0);
+ if ((i.types[this_operand].bitfield.jumpabsolute)
+ || (!current_templates->start->opcode_modifier.jump
+ && !current_templates->start->opcode_modifier.jumpdword))
+ {
+ bigdisp.bitfield.disp32 = 1;
+ override = (i.prefix[ADDR_PREFIX] != 0);
+ if (flag_code == CODE_64BIT)
+ {
+ if (!override)
+ {
+ bigdisp.bitfield.disp32s = 1;
+ bigdisp.bitfield.disp64 = 1;
+ }
+ }
+ else if ((flag_code == CODE_16BIT) ^ override)
+ {
+ bigdisp.bitfield.disp32 = 0;
+ bigdisp.bitfield.disp16 = 1;
+ }
+ }
+ else
{
- if (i.prefix[ADDR_PREFIX] == 0)
- bigdisp = Disp64 | Disp32S | Disp32;
+ /* For PC-relative branches, the width of the displacement
+ is dependent upon data size, not address size. */
+ override = (i.prefix[DATA_PREFIX] != 0);
+ if (flag_code == CODE_64BIT)
+ {
+ if (override || i.suffix == WORD_MNEM_SUFFIX)
+ bigdisp.bitfield.disp16 = 1;
+ else
+ {
+ bigdisp.bitfield.disp32 = 1;
+ bigdisp.bitfield.disp32s = 1;
+ }
+ }
+ else
+ {
+ if (!override)
+ override = (i.suffix == (flag_code != CODE_16BIT
+ ? WORD_MNEM_SUFFIX
+ : LONG_MNEM_SUFFIX));
+ bigdisp.bitfield.disp32 = 1;
+ if ((flag_code == CODE_16BIT) ^ override)
+ {
+ bigdisp.bitfield.disp32 = 0;
+ bigdisp.bitfield.disp16 = 1;
+ }
+ }
}
- else if ((flag_code == CODE_16BIT) ^ (i.prefix[ADDR_PREFIX] != 0))
- bigdisp = Disp16;
- i.types[this_operand] |= bigdisp;
+ i.types[this_operand] = operand_type_or (i.types[this_operand],
+ bigdisp);
exp = &disp_expressions[i.disp_operands];
i.op[this_operand].disps = exp;
#endif
#if GCC_ASM_O_HACK
END_STRING_AND_SAVE (disp_end + 1);
- if ((i.types[this_operand] & BaseIndex) != 0
+ if (i.types[this_operand].bitfield.baseIndex
&& displacement_string_end[-1] == '+')
{
/* This hack is to avoid a warning when using the "o"
#if GCC_ASM_O_HACK
RESTORE_END_STRING (disp_end + 1);
#endif
- RESTORE_END_STRING (disp_end);
input_line_pointer = save_input_line_pointer;
if (gotfree_input_line)
- free (gotfree_input_line);
+ {
+ free (gotfree_input_line);
+
+ if (exp->X_op == O_constant || exp->X_op == O_register)
+ exp->X_op = O_illegal;
+ }
+
+ ret = i386_finalize_displacement (exp_seg, exp, types, disp_start);
+
+ RESTORE_END_STRING (disp_end);
+
+ return ret;
+}
+
+static int
+i386_finalize_displacement (segT exp_seg ATTRIBUTE_UNUSED, expressionS *exp,
+ i386_operand_type types, const char *disp_start)
+{
+ i386_operand_type bigdisp;
+ int ret = 1;
/* We do this to make sure that the section symbol is in
the symbol table. We will ultimately change the relocation
|| i.reloc[this_operand] == BFD_RELOC_X86_64_GOTOFF64)
{
if (exp->X_op != O_symbol)
- {
- as_bad (_("bad expression used with @%s"),
- (i.reloc[this_operand] == BFD_RELOC_X86_64_GOTPCREL
- ? "GOTPCREL"
- : "GOTOFF"));
- return 0;
- }
+ goto inv_disp;
if (S_IS_LOCAL (exp->X_add_symbol)
&& S_GET_SEGMENT (exp->X_add_symbol) != undefined_section)
i.reloc[this_operand] = BFD_RELOC_32;
}
- if (exp->X_op == O_absent || exp->X_op == O_big)
+ else if (exp->X_op == O_absent
+ || exp->X_op == O_illegal
+ || exp->X_op == O_big)
{
- /* Missing or bad expr becomes absolute 0. */
- as_bad (_("missing or invalid displacement expression `%s' taken as 0"),
+ inv_disp:
+ as_bad (_("missing or invalid displacement expression `%s'"),
disp_start);
- exp->X_op = O_constant;
- exp->X_add_number = 0;
- exp->X_add_symbol = (symbolS *) 0;
- exp->X_op_symbol = (symbolS *) 0;
+ ret = 0;
}
#if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
- if (exp->X_op != O_constant
- && OUTPUT_FLAVOR == bfd_target_aout_flavour
- && exp_seg != absolute_section
- && exp_seg != text_section
- && exp_seg != data_section
- && exp_seg != bss_section
- && exp_seg != undefined_section
- && !bfd_is_com_section (exp_seg))
+ else if (exp->X_op != O_constant
+ && OUTPUT_FLAVOR == bfd_target_aout_flavour
+ && exp_seg != absolute_section
+ && exp_seg != text_section
+ && exp_seg != data_section
+ && exp_seg != bss_section
+ && exp_seg != undefined_section
+ && !bfd_is_com_section (exp_seg))
{
as_bad (_("unimplemented segment %s in operand"), exp_seg->name);
- return 0;
+ ret = 0;
}
#endif
- if (!(i.types[this_operand] & ~Disp))
- i.types[this_operand] &= types;
+ /* Check if this is a displacement only operand. */
+ bigdisp = i.types[this_operand];
+ bigdisp.bitfield.disp8 = 0;
+ bigdisp.bitfield.disp16 = 0;
+ bigdisp.bitfield.disp32 = 0;
+ bigdisp.bitfield.disp32s = 0;
+ bigdisp.bitfield.disp64 = 0;
+ if (operand_type_all_zero (&bigdisp))
+ i.types[this_operand] = operand_type_and (i.types[this_operand],
+ types);
- return 1;
+ return ret;
}
-static int i386_index_check PARAMS ((const char *));
-
/* Make sure the memory operand we've been dealt is valid.
Return 1 on success, 0 on a failure. */
static int
-i386_index_check (operand_string)
- const char *operand_string;
+i386_index_check (const char *operand_string)
{
int ok;
+ const char *kind = "base/index";
#if INFER_ADDR_PREFIX
int fudged = 0;
tryprefix:
#endif
ok = 1;
- if ((current_templates->start->cpu_flags & CpuSVME)
- && current_templates->end[-1].operand_types[0] == AnyMem)
- {
- /* Memory operands of SVME insns are special in that they only allow
- rAX as their memory address and ignore any segment override. */
- unsigned RegXX;
-
- /* SKINIT is even more restrictive: it always requires EAX. */
- if (strcmp (current_templates->start->name, "skinit") == 0)
- RegXX = Reg32;
- else if (flag_code == CODE_64BIT)
- RegXX = i.prefix[ADDR_PREFIX] == 0 ? Reg64 : Reg32;
+ if (current_templates->start->opcode_modifier.isstring
+ && !current_templates->start->opcode_modifier.immext
+ && (current_templates->end[-1].opcode_modifier.isstring
+ || i.mem_operands))
+ {
+ /* Memory operands of string insns are special in that they only allow
+ a single register (rDI, rSI, or rBX) as their memory address. */
+ unsigned int expected;
+
+ kind = "string address";
+
+ if (current_templates->start->opcode_modifier.w)
+ {
+ i386_operand_type type = current_templates->end[-1].operand_types[0];
+
+ if (!type.bitfield.baseindex
+ || ((!i.mem_operands != !intel_syntax)
+ && current_templates->end[-1].operand_types[1]
+ .bitfield.baseindex))
+ type = current_templates->end[-1].operand_types[1];
+ expected = type.bitfield.esseg ? 7 /* rDI */ : 6 /* rSI */;
+ }
else
- RegXX = (flag_code == CODE_16BIT) ^ (i.prefix[ADDR_PREFIX] != 0)
- ? Reg16
- : Reg32;
- if (!i.base_reg
- || !(i.base_reg->reg_type & Acc)
- || !(i.base_reg->reg_type & RegXX)
- || i.index_reg
- || (i.types[0] & Disp))
+ expected = 3 /* rBX */;
+
+ if (!i.base_reg || i.index_reg
+ || operand_type_check (i.types[this_operand], disp))
+ ok = -1;
+ else if (!(flag_code == CODE_64BIT
+ ? i.prefix[ADDR_PREFIX]
+ ? i.base_reg->reg_type.bitfield.reg32
+ : i.base_reg->reg_type.bitfield.reg64
+ : (flag_code == CODE_16BIT) ^ !i.prefix[ADDR_PREFIX]
+ ? i.base_reg->reg_type.bitfield.reg32
+ : i.base_reg->reg_type.bitfield.reg16))
ok = 0;
+ else if (i.base_reg->reg_num != expected)
+ ok = -1;
+
+ if (ok < 0)
+ {
+ unsigned int j;
+
+ for (j = 0; j < i386_regtab_size; ++j)
+ if ((flag_code == CODE_64BIT
+ ? i.prefix[ADDR_PREFIX]
+ ? i386_regtab[j].reg_type.bitfield.reg32
+ : i386_regtab[j].reg_type.bitfield.reg64
+ : (flag_code == CODE_16BIT) ^ !i.prefix[ADDR_PREFIX]
+ ? i386_regtab[j].reg_type.bitfield.reg32
+ : i386_regtab[j].reg_type.bitfield.reg16)
+ && i386_regtab[j].reg_num == expected)
+ break;
+ assert (j < i386_regtab_size);
+ as_warn (_("`%s' is not valid here (expected `%c%s%s%c')"),
+ operand_string,
+ intel_syntax ? '[' : '(',
+ register_prefix,
+ i386_regtab[j].reg_name,
+ intel_syntax ? ']' : ')');
+ ok = 1;
+ }
}
else if (flag_code == CODE_64BIT)
- {
- unsigned RegXX = (i.prefix[ADDR_PREFIX] == 0 ? Reg64 : Reg32);
-
- if ((i.base_reg
- && ((i.base_reg->reg_type & RegXX) == 0)
- && (i.base_reg->reg_type != BaseIndex
- || i.index_reg))
- || (i.index_reg
- && ((i.index_reg->reg_type & (RegXX | BaseIndex))
- != (RegXX | BaseIndex))))
- ok = 0;
+ {
+ if ((i.base_reg
+ && ((i.prefix[ADDR_PREFIX] == 0
+ && !i.base_reg->reg_type.bitfield.reg64)
+ || (i.prefix[ADDR_PREFIX]
+ && !i.base_reg->reg_type.bitfield.reg32))
+ && (i.index_reg
+ || i.base_reg->reg_num !=
+ (i.prefix[ADDR_PREFIX] == 0 ? RegRip : RegEip)))
+ || (i.index_reg
+ && (!i.index_reg->reg_type.bitfield.baseindex
+ || (i.prefix[ADDR_PREFIX] == 0
+ && i.index_reg->reg_num != RegRiz
+ && !i.index_reg->reg_type.bitfield.reg64
+ )
+ || (i.prefix[ADDR_PREFIX]
+ && i.index_reg->reg_num != RegEiz
+ && !i.index_reg->reg_type.bitfield.reg32))))
+ ok = 0;
}
else
{
{
/* 16bit checks. */
if ((i.base_reg
- && ((i.base_reg->reg_type & (Reg16 | BaseIndex | RegRex))
- != (Reg16 | BaseIndex)))
+ && (!i.base_reg->reg_type.bitfield.reg16
+ || !i.base_reg->reg_type.bitfield.baseindex))
|| (i.index_reg
- && (((i.index_reg->reg_type & (Reg16 | BaseIndex))
- != (Reg16 | BaseIndex))
+ && (!i.index_reg->reg_type.bitfield.reg16
+ || !i.index_reg->reg_type.bitfield.baseindex
|| !(i.base_reg
&& i.base_reg->reg_num < 6
&& i.index_reg->reg_num >= 6
{
/* 32bit checks. */
if ((i.base_reg
- && (i.base_reg->reg_type & (Reg32 | RegRex)) != Reg32)
+ && !i.base_reg->reg_type.bitfield.reg32)
|| (i.index_reg
- && ((i.index_reg->reg_type & (Reg32 | BaseIndex | RegRex))
- != (Reg32 | BaseIndex))))
+ && ((!i.index_reg->reg_type.bitfield.reg32
+ && i.index_reg->reg_num != RegEiz)
+ || !i.index_reg->reg_type.bitfield.baseindex)))
ok = 0;
}
}
if (!ok)
{
#if INFER_ADDR_PREFIX
- if (i.prefix[ADDR_PREFIX] == 0)
+ if (!i.mem_operands && !i.prefix[ADDR_PREFIX])
{
i.prefix[ADDR_PREFIX] = ADDR_PREFIX_OPCODE;
i.prefixes += 1;
FIXME. There doesn't seem to be any real need for separate
Disp16 and Disp32 flags. The same goes for Imm16 and Imm32.
Removing them would probably clean up the code quite a lot. */
- if (flag_code != CODE_64BIT && (i.types[this_operand] & (Disp16 | Disp32)))
- i.types[this_operand] ^= (Disp16 | Disp32);
+ if (flag_code != CODE_64BIT
+ && (i.types[this_operand].bitfield.disp16
+ || i.types[this_operand].bitfield.disp32))
+ i.types[this_operand]
+ = operand_type_xor (i.types[this_operand], disp16_32);
fudged = 1;
goto tryprefix;
}
if (fudged)
- as_bad (_("`%s' is not a valid base/index expression"),
- operand_string);
+ as_bad (_("`%s' is not a valid %s expression"),
+ operand_string,
+ kind);
else
#endif
- as_bad (_("`%s' is not a valid %s bit base/index expression"),
+ as_bad (_("`%s' is not a valid %s-bit %s expression"),
operand_string,
- flag_code_names[flag_code]);
+ flag_code_names[i.prefix[ADDR_PREFIX]
+ ? flag_code == CODE_32BIT
+ ? CODE_16BIT
+ : CODE_32BIT
+ : flag_code],
+ kind);
}
return ok;
}
-/* Parse OPERAND_STRING into the i386_insn structure I. Returns non-zero
+/* Parse OPERAND_STRING into the i386_insn structure I. Returns zero
on error. */
static int
-i386_operand (operand_string)
- char *operand_string;
+i386_att_operand (char *operand_string)
{
const reg_entry *r;
char *end_op;
++op_string;
if (is_space_char (*op_string))
++op_string;
- i.types[this_operand] |= JumpAbsolute;
+ i.types[this_operand].bitfield.jumpabsolute = 1;
}
/* Check if operand is a register. */
- if ((*op_string == REGISTER_PREFIX || allow_naked_reg)
- && (r = parse_register (op_string, &end_op)) != NULL)
+ if ((r = parse_register (op_string, &end_op)) != NULL)
{
+ i386_operand_type temp;
+
/* Check for a segment override by searching for ':' after a
segment register. */
op_string = end_op;
if (is_space_char (*op_string))
++op_string;
- if (*op_string == ':' && (r->reg_type & (SReg2 | SReg3)))
+ if (*op_string == ':'
+ && (r->reg_type.bitfield.sreg2
+ || r->reg_type.bitfield.sreg3))
{
switch (r->reg_num)
{
++op_string;
if (is_space_char (*op_string))
++op_string;
- i.types[this_operand] |= JumpAbsolute;
+ i.types[this_operand].bitfield.jumpabsolute = 1;
}
goto do_memory_reference;
}
as_bad (_("junk `%s' after register"), op_string);
return 0;
}
- i.types[this_operand] |= r->reg_type & ~BaseIndex;
+ temp = r->reg_type;
+ temp.bitfield.baseindex = 0;
+ i.types[this_operand] = operand_type_or (i.types[this_operand],
+ temp);
+ i.types[this_operand].bitfield.unspecified = 0;
i.op[this_operand].regs = r;
i.reg_operands++;
}
else if (*op_string == IMMEDIATE_PREFIX)
{
++op_string;
- if (i.types[this_operand] & JumpAbsolute)
+ if (i.types[this_operand].bitfield.jumpabsolute)
{
as_bad (_("immediate operand illegal with absolute jump"));
return 0;
do_memory_reference:
if ((i.mem_operands == 1
- && (current_templates->start->opcode_modifier & IsString) == 0)
+ && !current_templates->start->opcode_modifier.isstring)
|| i.mem_operands == 2)
{
as_bad (_("too many memory references for `%s'"),
++base_string;
if (*base_string == ','
- || ((*base_string == REGISTER_PREFIX || allow_naked_reg)
- && (i.base_reg = parse_register (base_string, &end_op)) != NULL))
+ || ((i.base_reg = parse_register (base_string, &end_op))
+ != NULL))
{
displacement_string_end = temp_string;
- i.types[this_operand] |= BaseIndex;
+ i.types[this_operand].bitfield.baseindex = 1;
if (i.base_reg)
{
if (is_space_char (*base_string))
++base_string;
- if ((*base_string == REGISTER_PREFIX || allow_naked_reg)
- && (i.index_reg = parse_register (base_string, &end_op)) != NULL)
+ if ((i.index_reg = parse_register (base_string, &end_op))
+ != NULL)
{
base_string = end_op;
if (is_space_char (*base_string))
}
else if (*base_string != ')')
{
- as_bad (_("expecting `,' or `)' after index register in `%s'"),
+ as_bad (_("expecting `,' or `)' "
+ "after index register in `%s'"),
operand_string);
return 0;
}
++base_string;
if (*base_string != ')')
{
- as_bad (_("expecting `)' after scale factor in `%s'"),
+ as_bad (_("expecting `)' "
+ "after scale factor in `%s'"),
operand_string);
return 0;
}
}
else if (!i.index_reg)
{
- as_bad (_("expecting index register or scale factor after `,'; got '%c'"),
+ as_bad (_("expecting index register or scale factor "
+ "after `,'; got '%c'"),
*base_string);
return 0;
}
}
else if (*base_string != ')')
{
- as_bad (_("expecting `,' or `)' after base register in `%s'"),
+ as_bad (_("expecting `,' or `)' "
+ "after base register in `%s'"),
operand_string);
return 0;
}
/* Special case for (%dx) while doing input/output op. */
if (i.base_reg
- && i.base_reg->reg_type == (Reg16 | InOutPortReg)
+ && operand_type_equal (&i.base_reg->reg_type,
+ ®16_inoutportreg)
&& i.index_reg == 0
&& i.log2_scale_factor == 0
&& i.seg[i.mem_operands] == 0
- && (i.types[this_operand] & Disp) == 0)
+ && !operand_type_check (i.types[this_operand], disp))
{
- i.types[this_operand] = InOutPortReg;
+ i.types[this_operand] = inoutportreg;
return 1;
}
if (i386_index_check (operand_string) == 0)
return 0;
+ i.types[this_operand].bitfield.mem = 1;
i.mem_operands++;
}
else
{
if (no_cond_jump_promotion
&& TYPE_FROM_RELAX_STATE (fragP->fr_subtype) != UNCOND_JUMP)
- as_warn_where (fragP->fr_file, fragP->fr_line, _("long jump required"));
+ as_warn_where (fragP->fr_file, fragP->fr_line,
+ _("long jump required"));
switch (fragP->fr_subtype)
{
}
}
+ /* If size if less then four we are sure that the operand fits,
+ but if it's 4, then it could be that the displacement is larger
+ then -/+ 2GB. */
+ if (DISP_SIZE_FROM_RELAX_STATE (fragP->fr_subtype) == 4
+ && object_64bit
+ && ((addressT) (displacement_from_opcode_start - extension
+ + ((addressT) 1 << 31))
+ > (((addressT) 2 << 31) - 1)))
+ {
+ as_bad_where (fragP->fr_file, fragP->fr_line,
+ _("jump target out of range"));
+ /* Make us emit 0. */
+ displacement_from_opcode_start = extension;
+ }
/* Now put displacement after opcode. */
md_number_to_chars ((char *) where_to_put_displacement,
(valueT) (displacement_from_opcode_start - extension),
fragP->fr_fix += extension;
}
\f
-/* Size of byte displacement jmp. */
-int md_short_jump_size = 2;
-
-/* Size of dword displacement jmp. */
-int md_long_jump_size = 5;
-
-void
-md_create_short_jump (ptr, from_addr, to_addr, frag, to_symbol)
- char *ptr;
- addressT from_addr, to_addr;
- fragS *frag ATTRIBUTE_UNUSED;
- symbolS *to_symbol ATTRIBUTE_UNUSED;
-{
- offsetT offset;
-
- offset = to_addr - (from_addr + 2);
- /* Opcode for byte-disp jump. */
- md_number_to_chars (ptr, (valueT) 0xeb, 1);
- md_number_to_chars (ptr + 1, (valueT) offset, 1);
-}
-
-void
-md_create_long_jump (ptr, from_addr, to_addr, frag, to_symbol)
- char *ptr;
- addressT from_addr, to_addr;
- fragS *frag ATTRIBUTE_UNUSED;
- symbolS *to_symbol ATTRIBUTE_UNUSED;
-{
- offsetT offset;
-
- offset = to_addr - (from_addr + 5);
- md_number_to_chars (ptr, (valueT) 0xe9, 1);
- md_number_to_chars (ptr + 1, (valueT) offset, 4);
-}
-\f
/* Apply a fixup (fixS) to segment data, once it has been determined
by our caller that we have all the info we need to fix it up.
case BFD_RELOC_386_TLS_IE_32:
case BFD_RELOC_386_TLS_IE:
case BFD_RELOC_386_TLS_GOTIE:
+ case BFD_RELOC_386_TLS_GOTDESC:
case BFD_RELOC_X86_64_TLSGD:
case BFD_RELOC_X86_64_TLSLD:
case BFD_RELOC_X86_64_GOTTPOFF:
+ case BFD_RELOC_X86_64_GOTPC32_TLSDESC:
value = 0; /* Fully resolved at runtime. No addend. */
/* Fallthrough */
case BFD_RELOC_386_TLS_LE:
S_SET_THREAD_LOCAL (fixP->fx_addsy);
break;
+ case BFD_RELOC_386_TLS_DESC_CALL:
+ case BFD_RELOC_X86_64_TLSDESC_CALL:
+ value = 0; /* Fully resolved at runtime. No addend. */
+ S_SET_THREAD_LOCAL (fixP->fx_addsy);
+ fixP->fx_done = 0;
+ return;
+
case BFD_RELOC_386_GOT32:
case BFD_RELOC_X86_64_GOT32:
value = 0; /* Fully resolved at runtime. No addend. */
md_number_to_chars (p, value, fixP->fx_size);
}
\f
-#define MAX_LITTLENUMS 6
-
-/* Turn the string pointed to by litP into a floating point constant
- of type TYPE, and emit the appropriate bytes. The number of
- LITTLENUMS emitted is stored in *SIZEP. An error message is
- returned, or NULL on OK. */
-
char *
-md_atof (type, litP, sizeP)
- int type;
- char *litP;
- int *sizeP;
+md_atof (int type, char *litP, int *sizeP)
{
- int prec;
- LITTLENUM_TYPE words[MAX_LITTLENUMS];
- LITTLENUM_TYPE *wordP;
- char *t;
-
- switch (type)
- {
- case 'f':
- case 'F':
- prec = 2;
- break;
-
- case 'd':
- case 'D':
- prec = 4;
- break;
-
- case 'x':
- case 'X':
- prec = 5;
- break;
-
- default:
- *sizeP = 0;
- return _("Bad call to md_atof ()");
- }
- t = atof_ieee (input_line_pointer, type, words);
- if (t)
- input_line_pointer = t;
-
- *sizeP = prec * sizeof (LITTLENUM_TYPE);
- /* This loops outputs the LITTLENUMs in REVERSE order; in accord with
- the bigendian 386. */
- for (wordP = words + prec - 1; prec--;)
- {
- md_number_to_chars (litP, (valueT) (*wordP--), sizeof (LITTLENUM_TYPE));
- litP += sizeof (LITTLENUM_TYPE);
- }
- return 0;
+ /* This outputs the LITTLENUMs in REVERSE order;
+ in accord with the bigendian 386. */
+ return ieee_md_atof (type, litP, sizeP, FALSE);
}
\f
-static char output_invalid_buf[8];
+static char output_invalid_buf[sizeof (unsigned char) * 2 + 6];
static char *
-output_invalid (c)
- int c;
+output_invalid (int c)
{
if (ISPRINT (c))
- sprintf (output_invalid_buf, "'%c'", c);
+ snprintf (output_invalid_buf, sizeof (output_invalid_buf),
+ "'%c'", c);
else
- sprintf (output_invalid_buf, "(0x%x)", (unsigned) c);
+ snprintf (output_invalid_buf, sizeof (output_invalid_buf),
+ "(0x%x)", (unsigned char) c);
return output_invalid_buf;
}
/* REG_STRING starts *before* REGISTER_PREFIX. */
static const reg_entry *
-parse_register (reg_string, end_op)
- char *reg_string;
- char **end_op;
+parse_real_register (char *reg_string, char **end_op)
{
char *s = reg_string;
char *p;
++s;
if (*s >= '0' && *s <= '7')
{
- r = &i386_float_regtab[*s - '0'];
+ int fpr = *s - '0';
++s;
if (is_space_char (*s))
++s;
if (*s == ')')
{
*end_op = s + 1;
- return r;
+ r = hash_find (reg_hash, "st(0)");
+ know (r);
+ return r + fpr;
}
}
/* We have "%st(" then garbage. */
}
}
- if (r != NULL
- && ((r->reg_flags & (RegRex64 | RegRex)) | (r->reg_type & Reg64)) != 0
- && (r->reg_type != Control || !(cpu_arch_flags & CpuSledgehammer))
+ if (r == NULL || allow_pseudo_reg)
+ return r;
+
+ if (operand_type_all_zero (&r->reg_type))
+ return (const reg_entry *) NULL;
+
+ if ((r->reg_type.bitfield.reg32
+ || r->reg_type.bitfield.sreg3
+ || r->reg_type.bitfield.control
+ || r->reg_type.bitfield.debug
+ || r->reg_type.bitfield.test)
+ && !cpu_arch_flags.bitfield.cpui386)
+ return (const reg_entry *) NULL;
+
+ if (r->reg_type.bitfield.regmmx && !cpu_arch_flags.bitfield.cpummx)
+ return (const reg_entry *) NULL;
+
+ if (r->reg_type.bitfield.regxmm && !cpu_arch_flags.bitfield.cpusse)
+ return (const reg_entry *) NULL;
+
+ if (r->reg_type.bitfield.regymm && !cpu_arch_flags.bitfield.cpuavx)
+ return (const reg_entry *) NULL;
+
+ /* Don't allow fake index register unless allow_index_reg isn't 0. */
+ if (!allow_index_reg
+ && (r->reg_num == RegEiz || r->reg_num == RegRiz))
+ return (const reg_entry *) NULL;
+
+ if (((r->reg_flags & (RegRex64 | RegRex))
+ || r->reg_type.bitfield.reg64)
+ && (!cpu_arch_flags.bitfield.cpulm
+ || !operand_type_equal (&r->reg_type, &control))
&& flag_code != CODE_64BIT)
return (const reg_entry *) NULL;
+ if (r->reg_type.bitfield.sreg3 && r->reg_num == RegFlat && !intel_syntax)
+ return (const reg_entry *) NULL;
+
+ return r;
+}
+
+/* REG_STRING starts *before* REGISTER_PREFIX. */
+
+static const reg_entry *
+parse_register (char *reg_string, char **end_op)
+{
+ const reg_entry *r;
+
+ if (*reg_string == REGISTER_PREFIX || allow_naked_reg)
+ r = parse_real_register (reg_string, end_op);
+ else
+ r = NULL;
+ if (!r)
+ {
+ char *save = input_line_pointer;
+ char c;
+ symbolS *symbolP;
+
+ input_line_pointer = reg_string;
+ c = get_symbol_end ();
+ symbolP = symbol_find (reg_string);
+ if (symbolP && S_GET_SEGMENT (symbolP) == reg_section)
+ {
+ const expressionS *e = symbol_get_value_expression (symbolP);
+
+ know (e->X_op == O_register);
+ know (e->X_add_number >= 0
+ && (valueT) e->X_add_number < i386_regtab_size);
+ r = i386_regtab + e->X_add_number;
+ *end_op = input_line_pointer;
+ }
+ *input_line_pointer = c;
+ input_line_pointer = save;
+ }
return r;
}
+
+int
+i386_parse_name (char *name, expressionS *e, char *nextcharP)
+{
+ const reg_entry *r;
+ char *end = input_line_pointer;
+
+ *end = *nextcharP;
+ r = parse_register (name, &input_line_pointer);
+ if (r && end <= input_line_pointer)
+ {
+ *nextcharP = *input_line_pointer;
+ *input_line_pointer = 0;
+ e->X_op = O_register;
+ e->X_add_number = r - i386_regtab;
+ return 1;
+ }
+ input_line_pointer = end;
+ *end = 0;
+ return intel_syntax ? i386_intel_parse_name (name, e) : 0;
+}
+
+void
+md_operand (expressionS *e)
+{
+ char *end;
+ const reg_entry *r;
+
+ switch (*input_line_pointer)
+ {
+ case REGISTER_PREFIX:
+ r = parse_real_register (input_line_pointer, &end);
+ if (r)
+ {
+ e->X_op = O_register;
+ e->X_add_number = r - i386_regtab;
+ input_line_pointer = end;
+ }
+ break;
+
+ case '[':
+ assert (intel_syntax);
+ end = input_line_pointer++;
+ expression (e);
+ if (*input_line_pointer == ']')
+ {
+ ++input_line_pointer;
+ e->X_op_symbol = make_expr_symbol (e);
+ e->X_add_symbol = NULL;
+ e->X_add_number = 0;
+ e->X_op = O_index;
+ }
+ else
+ {
+ e->X_op = O_absent;
+ input_line_pointer = end;
+ }
+ break;
+ }
+}
+
\f
#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
const char *md_shortopts = "kVQ:sqn";
const char *md_shortopts = "qn";
#endif
-struct option md_longopts[] = {
#define OPTION_32 (OPTION_MD_BASE + 0)
- {"32", no_argument, NULL, OPTION_32},
-#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
#define OPTION_64 (OPTION_MD_BASE + 1)
+#define OPTION_DIVIDE (OPTION_MD_BASE + 2)
+#define OPTION_MARCH (OPTION_MD_BASE + 3)
+#define OPTION_MTUNE (OPTION_MD_BASE + 4)
+#define OPTION_MMNEMONIC (OPTION_MD_BASE + 5)
+#define OPTION_MSYNTAX (OPTION_MD_BASE + 6)
+#define OPTION_MINDEX_REG (OPTION_MD_BASE + 7)
+#define OPTION_MNAKED_REG (OPTION_MD_BASE + 8)
+#define OPTION_MOLD_GCC (OPTION_MD_BASE + 9)
+#define OPTION_MSSE2AVX (OPTION_MD_BASE + 10)
+#define OPTION_MSSE_CHECK (OPTION_MD_BASE + 11)
+
+struct option md_longopts[] =
+{
+ {"32", no_argument, NULL, OPTION_32},
+#if (defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) \
+ || defined (TE_PE) || defined (TE_PEP))
{"64", no_argument, NULL, OPTION_64},
#endif
+ {"divide", no_argument, NULL, OPTION_DIVIDE},
+ {"march", required_argument, NULL, OPTION_MARCH},
+ {"mtune", required_argument, NULL, OPTION_MTUNE},
+ {"mmnemonic", required_argument, NULL, OPTION_MMNEMONIC},
+ {"msyntax", required_argument, NULL, OPTION_MSYNTAX},
+ {"mindex-reg", no_argument, NULL, OPTION_MINDEX_REG},
+ {"mnaked-reg", no_argument, NULL, OPTION_MNAKED_REG},
+ {"mold-gcc", no_argument, NULL, OPTION_MOLD_GCC},
+ {"msse2avx", no_argument, NULL, OPTION_MSSE2AVX},
+ {"msse-check", required_argument, NULL, OPTION_MSSE_CHECK},
{NULL, no_argument, NULL, 0}
};
size_t md_longopts_size = sizeof (md_longopts);
int
-md_parse_option (c, arg)
- int c;
- char *arg ATTRIBUTE_UNUSED;
+md_parse_option (int c, char *arg)
{
+ unsigned int i;
+ char *arch, *next;
+
switch (c)
{
case 'n':
/* -s: On i386 Solaris, this tells the native assembler to use
.stab instead of .stab.excl. We always use .stab anyhow. */
break;
-
+#endif
+#if (defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) \
+ || defined (TE_PE) || defined (TE_PEP))
case OPTION_64:
{
const char **list, **l;
list = bfd_target_list ();
for (l = list; *l != NULL; l++)
- if (strcmp (*l, "elf64-x86-64") == 0)
+ if (CONST_STRNEQ (*l, "elf64-x86-64")
+ || strcmp (*l, "coff-x86-64") == 0
+ || strcmp (*l, "pe-x86-64") == 0
+ || strcmp (*l, "pei-x86-64") == 0)
{
default_arch = "x86_64";
break;
default_arch = "i386";
break;
- default:
- return 0;
+ case OPTION_DIVIDE:
+#ifdef SVR4_COMMENT_CHARS
+ {
+ char *n, *t;
+ const char *s;
+
+ n = (char *) xmalloc (strlen (i386_comment_chars) + 1);
+ t = n;
+ for (s = i386_comment_chars; *s != '\0'; s++)
+ if (*s != '/')
+ *t++ = *s;
+ *t = '\0';
+ i386_comment_chars = n;
+ }
+#endif
+ break;
+
+ case OPTION_MARCH:
+ arch = xstrdup (arg);
+ do
+ {
+ if (*arch == '.')
+ as_fatal (_("Invalid -march= option: `%s'"), arg);
+ next = strchr (arch, '+');
+ if (next)
+ *next++ = '\0';
+ for (i = 0; i < ARRAY_SIZE (cpu_arch); i++)
+ {
+ if (strcmp (arch, cpu_arch [i].name) == 0)
+ {
+ /* Processor. */
+ cpu_arch_name = cpu_arch[i].name;
+ cpu_sub_arch_name = NULL;
+ cpu_arch_flags = cpu_arch[i].flags;
+ cpu_arch_isa = cpu_arch[i].type;
+ cpu_arch_isa_flags = cpu_arch[i].flags;
+ if (!cpu_arch_tune_set)
+ {
+ cpu_arch_tune = cpu_arch_isa;
+ cpu_arch_tune_flags = cpu_arch_isa_flags;
+ }
+ break;
+ }
+ else if (*cpu_arch [i].name == '.'
+ && strcmp (arch, cpu_arch [i].name + 1) == 0)
+ {
+ /* ISA entension. */
+ i386_cpu_flags flags;
+ flags = cpu_flags_or (cpu_arch_flags,
+ cpu_arch[i].flags);
+ if (!cpu_flags_equal (&flags, &cpu_arch_flags))
+ {
+ if (cpu_sub_arch_name)
+ {
+ char *name = cpu_sub_arch_name;
+ cpu_sub_arch_name = concat (name,
+ cpu_arch[i].name,
+ (const char *) NULL);
+ free (name);
+ }
+ else
+ cpu_sub_arch_name = xstrdup (cpu_arch[i].name);
+ cpu_arch_flags = flags;
+ }
+ break;
+ }
+ }
+
+ if (i >= ARRAY_SIZE (cpu_arch))
+ as_fatal (_("Invalid -march= option: `%s'"), arg);
+
+ arch = next;
+ }
+ while (next != NULL );
+ break;
+
+ case OPTION_MTUNE:
+ if (*arg == '.')
+ as_fatal (_("Invalid -mtune= option: `%s'"), arg);
+ for (i = 0; i < ARRAY_SIZE (cpu_arch); i++)
+ {
+ if (strcmp (arg, cpu_arch [i].name) == 0)
+ {
+ cpu_arch_tune_set = 1;
+ cpu_arch_tune = cpu_arch [i].type;
+ cpu_arch_tune_flags = cpu_arch[i].flags;
+ break;
+ }
+ }
+ if (i >= ARRAY_SIZE (cpu_arch))
+ as_fatal (_("Invalid -mtune= option: `%s'"), arg);
+ break;
+
+ case OPTION_MMNEMONIC:
+ if (strcasecmp (arg, "att") == 0)
+ intel_mnemonic = 0;
+ else if (strcasecmp (arg, "intel") == 0)
+ intel_mnemonic = 1;
+ else
+ as_fatal (_("Invalid -mmnemonic= option: `%s'"), arg);
+ break;
+
+ case OPTION_MSYNTAX:
+ if (strcasecmp (arg, "att") == 0)
+ intel_syntax = 0;
+ else if (strcasecmp (arg, "intel") == 0)
+ intel_syntax = 1;
+ else
+ as_fatal (_("Invalid -msyntax= option: `%s'"), arg);
+ break;
+
+ case OPTION_MINDEX_REG:
+ allow_index_reg = 1;
+ break;
+
+ case OPTION_MNAKED_REG:
+ allow_naked_reg = 1;
+ break;
+
+ case OPTION_MOLD_GCC:
+ old_gcc = 1;
+ break;
+
+ case OPTION_MSSE2AVX:
+ sse2avx = 1;
+ break;
+
+ case OPTION_MSSE_CHECK:
+ if (strcasecmp (arg, "error") == 0)
+ sse_check = sse_check_error;
+ else if (strcasecmp (arg, "warning") == 0)
+ sse_check = sse_check_warning;
+ else if (strcasecmp (arg, "none") == 0)
+ sse_check = sse_check_none;
+ else
+ as_fatal (_("Invalid -msse-check= option: `%s'"), arg);
+ break;
+
+ default:
+ return 0;
}
return 1;
}
fprintf (stream, _("\
-Q ignored\n\
-V print assembler version number\n\
- -k ignored\n\
+ -k ignored\n"));
+#endif
+ fprintf (stream, _("\
-n Do not optimize code alignment\n\
- -q quieten some warnings\n\
+ -q quieten some warnings\n"));
+#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
+ fprintf (stream, _("\
-s ignored\n"));
+#endif
+#if (defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) \
+ || defined (TE_PE) || defined (TE_PEP))
+ fprintf (stream, _("\
+ --32/--64 generate 32bit/64bit code\n"));
+#endif
+#ifdef SVR4_COMMENT_CHARS
+ fprintf (stream, _("\
+ --divide do not treat `/' as a comment character\n"));
#else
fprintf (stream, _("\
- -n Do not optimize code alignment\n\
- -q quieten some warnings\n"));
+ --divide ignored\n"));
#endif
+ fprintf (stream, _("\
+ -march=CPU[,+EXTENSION...]\n\
+ generate code for CPU and EXTENSION, CPU is one of:\n\
+ i8086, i186, i286, i386, i486, pentium, pentiumpro,\n\
+ pentiumii, pentiumiii, pentium4, prescott, nocona,\n\
+ core, core2, corei7, k6, k6_2, athlon, k8, amdfam10,\n\
+ generic32, generic64\n\
+ EXTENSION is combination of:\n\
+ mmx, sse, sse2, sse3, ssse3, sse4.1, sse4.2, sse4,\n\
+ avx, vmx, smx, xsave, movbe, ept, aes, pclmul, fma,\n\
+ clflush, syscall, rdtscp, 3dnow, 3dnowa, sse4a,\n\
+ svme, abm, padlock\n"));
+ fprintf (stream, _("\
+ -mtune=CPU optimize for CPU, CPU is one of:\n\
+ i8086, i186, i286, i386, i486, pentium, pentiumpro,\n\
+ pentiumii, pentiumiii, pentium4, prescott, nocona,\n\
+ core, core2, corei7, k6, k6_2, athlon, k8, amdfam10,\n\
+ generic32, generic64\n"));
+ fprintf (stream, _("\
+ -msse2avx encode SSE instructions with VEX prefix\n"));
+ fprintf (stream, _("\
+ -msse-check=[none|error|warning]\n\
+ check SSE instructions\n"));
+ fprintf (stream, _("\
+ -mmnemonic=[att|intel] use AT&T/Intel mnemonic\n"));
+ fprintf (stream, _("\
+ -msyntax=[att|intel] use AT&T/Intel syntax\n"));
+ fprintf (stream, _("\
+ -mindex-reg support pseudo index registers\n"));
+ fprintf (stream, _("\
+ -mnaked-reg don't require `%%' prefix for registers\n"));
+ fprintf (stream, _("\
+ -mold-gcc support old (<= 2.8.1) versions of gcc\n"));
}
#if ((defined (OBJ_MAYBE_COFF) && defined (OBJ_MAYBE_AOUT)) \
- || defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF))
+ || defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) \
+ || defined (TE_PE) || defined (TE_PEP))
/* Pick the target format to use. */
const char *
-i386_target_format ()
+i386_target_format (void)
{
if (!strcmp (default_arch, "x86_64"))
- set_code_flag (CODE_64BIT);
+ {
+ set_code_flag (CODE_64BIT);
+ if (cpu_flags_all_zero (&cpu_arch_isa_flags))
+ {
+ cpu_arch_isa_flags.bitfield.cpui186 = 1;
+ cpu_arch_isa_flags.bitfield.cpui286 = 1;
+ cpu_arch_isa_flags.bitfield.cpui386 = 1;
+ cpu_arch_isa_flags.bitfield.cpui486 = 1;
+ cpu_arch_isa_flags.bitfield.cpui586 = 1;
+ cpu_arch_isa_flags.bitfield.cpui686 = 1;
+ cpu_arch_isa_flags.bitfield.cpuclflush = 1;
+ cpu_arch_isa_flags.bitfield.cpummx= 1;
+ cpu_arch_isa_flags.bitfield.cpusse = 1;
+ cpu_arch_isa_flags.bitfield.cpusse2 = 1;
+ }
+ if (cpu_flags_all_zero (&cpu_arch_tune_flags))
+ {
+ cpu_arch_tune_flags.bitfield.cpui186 = 1;
+ cpu_arch_tune_flags.bitfield.cpui286 = 1;
+ cpu_arch_tune_flags.bitfield.cpui386 = 1;
+ cpu_arch_tune_flags.bitfield.cpui486 = 1;
+ cpu_arch_tune_flags.bitfield.cpui586 = 1;
+ cpu_arch_tune_flags.bitfield.cpui686 = 1;
+ cpu_arch_tune_flags.bitfield.cpuclflush = 1;
+ cpu_arch_tune_flags.bitfield.cpummx= 1;
+ cpu_arch_tune_flags.bitfield.cpusse = 1;
+ cpu_arch_tune_flags.bitfield.cpusse2 = 1;
+ }
+ }
else if (!strcmp (default_arch, "i386"))
- set_code_flag (CODE_32BIT);
+ {
+ set_code_flag (CODE_32BIT);
+ if (cpu_flags_all_zero (&cpu_arch_isa_flags))
+ {
+ cpu_arch_isa_flags.bitfield.cpui186 = 1;
+ cpu_arch_isa_flags.bitfield.cpui286 = 1;
+ cpu_arch_isa_flags.bitfield.cpui386 = 1;
+ }
+ if (cpu_flags_all_zero (&cpu_arch_tune_flags))
+ {
+ cpu_arch_tune_flags.bitfield.cpui186 = 1;
+ cpu_arch_tune_flags.bitfield.cpui286 = 1;
+ cpu_arch_tune_flags.bitfield.cpui386 = 1;
+ }
+ }
else
as_fatal (_("Unknown architecture"));
switch (OUTPUT_FLAVOR)
{
+#if defined (TE_PE) || defined (TE_PEP)
+ case bfd_target_coff_flavour:
+ return flag_code == CODE_64BIT ? "pe-x86-64" : "pe-i386";
+#endif
#ifdef OBJ_MAYBE_AOUT
case bfd_target_aout_flavour:
return AOUT_TARGET_FORMAT;
object_64bit = 1;
use_rela_relocations = 1;
}
- return flag_code == CODE_64BIT ? "elf64-x86-64" : ELF_TARGET_FORMAT;
+ return flag_code == CODE_64BIT ? ELF_TARGET_FORMAT64 : ELF_TARGET_FORMAT;
}
#endif
default:
#endif /* OBJ_MAYBE_ more than one */
#if (defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF))
-void i386_elf_emit_arch_note ()
+void
+i386_elf_emit_arch_note (void)
{
if (IS_ELF && cpu_arch_name != NULL)
{
as_bad (_("GOT already in symbol table"));
GOT_symbol = symbol_new (name, undefined_section,
(valueT) 0, &zero_address_frag);
- };
- return GOT_symbol;
- }
- return 0;
-}
-
-/* Round up a section size to the appropriate boundary. */
-
-valueT
-md_section_align (segment, size)
- segT segment ATTRIBUTE_UNUSED;
- valueT size;
-{
-#if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
- if (OUTPUT_FLAVOR == bfd_target_aout_flavour)
- {
- /* For a.out, force the section size to be aligned. If we don't do
- this, BFD will align it for us, but it will not write out the
- final bytes of the section. This may be a bug in BFD, but it is
- easier to fix it here since that is how the other a.out targets
- work. */
- int align;
-
- align = bfd_get_section_alignment (stdoutput, segment);
- size = ((size + (1 << align) - 1) & ((valueT) -1 << align));
- }
-#endif
-
- return size;
-}
-
-/* On the i386, PC-relative offsets are relative to the start of the
- next instruction. That is, the address of the offset, plus its
- size, since the offset is always the last part of the insn. */
-
-long
-md_pcrel_from (fixP)
- fixS *fixP;
-{
- return fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address;
-}
-
-#ifndef I386COFF
-
-static void
-s_bss (ignore)
- int ignore ATTRIBUTE_UNUSED;
-{
- int temp;
-
-#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
- if (IS_ELF)
- obj_elf_section_change_hook ();
-#endif
- temp = get_absolute_expression ();
- subseg_set (bss_section, (subsegT) temp);
- demand_empty_rest_of_line ();
-}
-
-#endif
-
-void
-i386_validate_fix (fixp)
- fixS *fixp;
-{
- if (fixp->fx_subsy && fixp->fx_subsy == GOT_symbol)
- {
- if (fixp->fx_r_type == BFD_RELOC_32_PCREL)
- {
- if (!object_64bit)
- abort ();
- fixp->fx_r_type = BFD_RELOC_X86_64_GOTPCREL;
- }
- else
- {
- if (!object_64bit)
- fixp->fx_r_type = BFD_RELOC_386_GOTOFF;
- else
- fixp->fx_r_type = BFD_RELOC_X86_64_GOTOFF64;
- }
- fixp->fx_subsy = 0;
- }
-}
-
-arelent *
-tc_gen_reloc (section, fixp)
- asection *section ATTRIBUTE_UNUSED;
- fixS *fixp;
-{
- arelent *rel;
- bfd_reloc_code_real_type code;
-
- switch (fixp->fx_r_type)
- {
- case BFD_RELOC_X86_64_PLT32:
- case BFD_RELOC_X86_64_GOT32:
- case BFD_RELOC_X86_64_GOTPCREL:
- case BFD_RELOC_386_PLT32:
- case BFD_RELOC_386_GOT32:
- case BFD_RELOC_386_GOTOFF:
- case BFD_RELOC_386_GOTPC:
- case BFD_RELOC_386_TLS_GD:
- case BFD_RELOC_386_TLS_LDM:
- case BFD_RELOC_386_TLS_LDO_32:
- case BFD_RELOC_386_TLS_IE_32:
- case BFD_RELOC_386_TLS_IE:
- case BFD_RELOC_386_TLS_GOTIE:
- case BFD_RELOC_386_TLS_LE_32:
- case BFD_RELOC_386_TLS_LE:
- case BFD_RELOC_X86_64_TLSGD:
- case BFD_RELOC_X86_64_TLSLD:
- case BFD_RELOC_X86_64_DTPOFF32:
- case BFD_RELOC_X86_64_DTPOFF64:
- case BFD_RELOC_X86_64_GOTTPOFF:
- case BFD_RELOC_X86_64_TPOFF32:
- case BFD_RELOC_X86_64_TPOFF64:
- case BFD_RELOC_X86_64_GOTOFF64:
- case BFD_RELOC_X86_64_GOTPC32:
- case BFD_RELOC_RVA:
- case BFD_RELOC_VTABLE_ENTRY:
- case BFD_RELOC_VTABLE_INHERIT:
-#ifdef TE_PE
- case BFD_RELOC_32_SECREL:
-#endif
- code = fixp->fx_r_type;
- break;
- case BFD_RELOC_X86_64_32S:
- if (!fixp->fx_pcrel)
- {
- /* Don't turn BFD_RELOC_X86_64_32S into BFD_RELOC_32. */
- code = fixp->fx_r_type;
- break;
- }
- default:
- if (fixp->fx_pcrel)
- {
- switch (fixp->fx_size)
- {
- default:
- as_bad_where (fixp->fx_file, fixp->fx_line,
- _("can not do %d byte pc-relative relocation"),
- fixp->fx_size);
- code = BFD_RELOC_32_PCREL;
- break;
- case 1: code = BFD_RELOC_8_PCREL; break;
- case 2: code = BFD_RELOC_16_PCREL; break;
- case 4: code = BFD_RELOC_32_PCREL; break;
-#ifdef BFD64
- case 8: code = BFD_RELOC_64_PCREL; break;
-#endif
- }
- }
- else
- {
- switch (fixp->fx_size)
- {
- default:
- as_bad_where (fixp->fx_file, fixp->fx_line,
- _("can not do %d byte relocation"),
- fixp->fx_size);
- code = BFD_RELOC_32;
- break;
- case 1: code = BFD_RELOC_8; break;
- case 2: code = BFD_RELOC_16; break;
- case 4: code = BFD_RELOC_32; break;
-#ifdef BFD64
- case 8: code = BFD_RELOC_64; break;
-#endif
- }
- }
- break;
- }
-
- if ((code == BFD_RELOC_32 || code == BFD_RELOC_32_PCREL)
- && GOT_symbol
- && fixp->fx_addsy == GOT_symbol)
- {
- if (!object_64bit)
- code = BFD_RELOC_386_GOTPC;
- else
- code = BFD_RELOC_X86_64_GOTPC32;
- }
-
- rel = (arelent *) xmalloc (sizeof (arelent));
- rel->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
- *rel->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
-
- rel->address = fixp->fx_frag->fr_address + fixp->fx_where;
-
- if (!use_rela_relocations)
- {
- /* HACK: Since i386 ELF uses Rel instead of Rela, encode the
- vtable entry to be used in the relocation's section offset. */
- if (fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
- rel->address = fixp->fx_offset;
-
- rel->addend = 0;
- }
- /* Use the rela in 64bit mode. */
- else
- {
- if (!fixp->fx_pcrel)
- rel->addend = fixp->fx_offset;
- else
- switch (code)
- {
- case BFD_RELOC_X86_64_PLT32:
- case BFD_RELOC_X86_64_GOT32:
- case BFD_RELOC_X86_64_GOTPCREL:
- case BFD_RELOC_X86_64_TLSGD:
- case BFD_RELOC_X86_64_TLSLD:
- case BFD_RELOC_X86_64_GOTTPOFF:
- rel->addend = fixp->fx_offset - fixp->fx_size;
- break;
- default:
- rel->addend = (section->vma
- - fixp->fx_size
- + fixp->fx_addnumber
- + md_pcrel_from (fixp));
- break;
- }
- }
-
- rel->howto = bfd_reloc_type_lookup (stdoutput, code);
- if (rel->howto == NULL)
- {
- as_bad_where (fixp->fx_file, fixp->fx_line,
- _("cannot represent relocation type %s"),
- bfd_get_reloc_code_name (code));
- /* Set howto to a garbage value so that we can keep going. */
- rel->howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_32);
- assert (rel->howto != NULL);
- }
-
- return rel;
-}
-
-\f
-/* Parse operands using Intel syntax. This implements a recursive descent
- parser based on the BNF grammar published in Appendix B of the MASM 6.1
- Programmer's Guide.
-
- FIXME: We do not recognize the full operand grammar defined in the MASM
- documentation. In particular, all the structure/union and
- high-level macro operands are missing.
-
- Uppercase words are terminals, lower case words are non-terminals.
- Objects surrounded by double brackets '[[' ']]' are optional. Vertical
- bars '|' denote choices. Most grammar productions are implemented in
- functions called 'intel_<production>'.
-
- Initial production is 'expr'.
-
- addOp + | -
-
- alpha [a-zA-Z]
-
- binOp & | AND | \| | OR | ^ | XOR
-
- byteRegister AL | AH | BL | BH | CL | CH | DL | DH
-
- constant digits [[ radixOverride ]]
-
- dataType BYTE | WORD | DWORD | FWORD | QWORD | TBYTE | OWORD | XMMWORD
-
- digits decdigit
- | digits decdigit
- | digits hexdigit
-
- decdigit [0-9]
-
- e04 e04 addOp e05
- | e05
-
- e05 e05 binOp e06
- | e06
-
- e06 e06 mulOp e09
- | e09
-
- e09 OFFSET e10
- | SHORT e10
- | + e10
- | - e10
- | ~ e10
- | NOT e10
- | e09 PTR e10
- | e09 : e10
- | e10
-
- e10 e10 [ expr ]
- | e11
-
- e11 ( expr )
- | [ expr ]
- | constant
- | dataType
- | id
- | $
- | register
-
- => expr expr cmpOp e04
- | e04
-
- gpRegister AX | EAX | BX | EBX | CX | ECX | DX | EDX
- | BP | EBP | SP | ESP | DI | EDI | SI | ESI
-
- hexdigit a | b | c | d | e | f
- | A | B | C | D | E | F
-
- id alpha
- | id alpha
- | id decdigit
-
- mulOp * | / | % | MOD | << | SHL | >> | SHR
-
- quote " | '
-
- register specialRegister
- | gpRegister
- | byteRegister
-
- segmentRegister CS | DS | ES | FS | GS | SS
-
- specialRegister CR0 | CR2 | CR3 | CR4
- | DR0 | DR1 | DR2 | DR3 | DR6 | DR7
- | TR3 | TR4 | TR5 | TR6 | TR7
-
- We simplify the grammar in obvious places (e.g., register parsing is
- done by calling parse_register) and eliminate immediate left recursion
- to implement a recursive-descent parser.
-
- expr e04 expr'
-
- expr' cmpOp e04 expr'
- | Empty
-
- e04 e05 e04'
-
- e04' addOp e05 e04'
- | Empty
-
- e05 e06 e05'
-
- e05' binOp e06 e05'
- | Empty
-
- e06 e09 e06'
-
- e06' mulOp e09 e06'
- | Empty
-
- e09 OFFSET e10 e09'
- | SHORT e10'
- | + e10'
- | - e10'
- | ~ e10'
- | NOT e10'
- | e10 e09'
-
- e09' PTR e10 e09'
- | : e10 e09'
- | Empty
-
- e10 e11 e10'
-
- e10' [ expr ] e10'
- | Empty
-
- e11 ( expr )
- | [ expr ]
- | BYTE
- | WORD
- | DWORD
- | FWORD
- | QWORD
- | TBYTE
- | OWORD
- | XMMWORD
- | .
- | $
- | register
- | id
- | constant */
-
-/* Parsing structure for the intel syntax parser. Used to implement the
- semantic actions for the operand grammar. */
-struct intel_parser_s
- {
- char *op_string; /* The string being parsed. */
- int got_a_float; /* Whether the operand is a float. */
- int op_modifier; /* Operand modifier. */
- int is_mem; /* 1 if operand is memory reference. */
- int in_offset; /* >=1 if parsing operand of offset. */
- int in_bracket; /* >=1 if parsing operand in brackets. */
- const reg_entry *reg; /* Last register reference found. */
- char *disp; /* Displacement string being built. */
- char *next_operand; /* Resume point when splitting operands. */
- };
-
-static struct intel_parser_s intel_parser;
-
-/* Token structure for parsing intel syntax. */
-struct intel_token
- {
- int code; /* Token code. */
- const reg_entry *reg; /* Register entry for register tokens. */
- char *str; /* String representation. */
- };
-
-static struct intel_token cur_token, prev_token;
-
-/* Token codes for the intel parser. Since T_SHORT is already used
- by COFF, undefine it first to prevent a warning. */
-#define T_NIL -1
-#define T_CONST 1
-#define T_REG 2
-#define T_BYTE 3
-#define T_WORD 4
-#define T_DWORD 5
-#define T_FWORD 6
-#define T_QWORD 7
-#define T_TBYTE 8
-#define T_XMMWORD 9
-#undef T_SHORT
-#define T_SHORT 10
-#define T_OFFSET 11
-#define T_PTR 12
-#define T_ID 13
-#define T_SHL 14
-#define T_SHR 15
-
-/* Prototypes for intel parser functions. */
-static int intel_match_token PARAMS ((int code));
-static void intel_get_token PARAMS ((void));
-static void intel_putback_token PARAMS ((void));
-static int intel_expr PARAMS ((void));
-static int intel_e04 PARAMS ((void));
-static int intel_e05 PARAMS ((void));
-static int intel_e06 PARAMS ((void));
-static int intel_e09 PARAMS ((void));
-static int intel_bracket_expr PARAMS ((void));
-static int intel_e10 PARAMS ((void));
-static int intel_e11 PARAMS ((void));
-
-static int
-i386_intel_operand (operand_string, got_a_float)
- char *operand_string;
- int got_a_float;
-{
- int ret;
- char *p;
-
- p = intel_parser.op_string = xstrdup (operand_string);
- intel_parser.disp = (char *) xmalloc (strlen (operand_string) + 1);
-
- for (;;)
- {
- /* Initialize token holders. */
- cur_token.code = prev_token.code = T_NIL;
- cur_token.reg = prev_token.reg = NULL;
- cur_token.str = prev_token.str = NULL;
-
- /* Initialize parser structure. */
- intel_parser.got_a_float = got_a_float;
- intel_parser.op_modifier = 0;
- intel_parser.is_mem = 0;
- intel_parser.in_offset = 0;
- intel_parser.in_bracket = 0;
- intel_parser.reg = NULL;
- intel_parser.disp[0] = '\0';
- intel_parser.next_operand = NULL;
-
- /* Read the first token and start the parser. */
- intel_get_token ();
- ret = intel_expr ();
-
- if (!ret)
- break;
-
- if (cur_token.code != T_NIL)
- {
- as_bad (_("invalid operand for '%s' ('%s' unexpected)"),
- current_templates->start->name, cur_token.str);
- ret = 0;
- }
- /* If we found a memory reference, hand it over to i386_displacement
- to fill in the rest of the operand fields. */
- else if (intel_parser.is_mem)
- {
- if ((i.mem_operands == 1
- && (current_templates->start->opcode_modifier & IsString) == 0)
- || i.mem_operands == 2)
- {
- as_bad (_("too many memory references for '%s'"),
- current_templates->start->name);
- ret = 0;
- }
- else
- {
- char *s = intel_parser.disp;
- i.mem_operands++;
-
- if (!quiet_warnings && intel_parser.is_mem < 0)
- /* See the comments in intel_bracket_expr. */
- as_warn (_("Treating `%s' as memory reference"), operand_string);
-
- /* Add the displacement expression. */
- if (*s != '\0')
- ret = i386_displacement (s, s + strlen (s));
- if (ret)
- {
- /* Swap base and index in 16-bit memory operands like
- [si+bx]. Since i386_index_check is also used in AT&T
- mode we have to do that here. */
- if (i.base_reg
- && i.index_reg
- && (i.base_reg->reg_type & Reg16)
- && (i.index_reg->reg_type & Reg16)
- && i.base_reg->reg_num >= 6
- && i.index_reg->reg_num < 6)
- {
- const reg_entry *base = i.index_reg;
-
- i.index_reg = i.base_reg;
- i.base_reg = base;
- }
- ret = i386_index_check (operand_string);
- }
- }
- }
-
- /* Constant and OFFSET expressions are handled by i386_immediate. */
- else if ((intel_parser.op_modifier & (1 << T_OFFSET))
- || intel_parser.reg == NULL)
- ret = i386_immediate (intel_parser.disp);
-
- if (intel_parser.next_operand && this_operand >= MAX_OPERANDS - 1)
- ret = 0;
- if (!ret || !intel_parser.next_operand)
- break;
- intel_parser.op_string = intel_parser.next_operand;
- this_operand = i.operands++;
- }
-
- free (p);
- free (intel_parser.disp);
-
- return ret;
-}
-
-#define NUM_ADDRESS_REGS (!!i.base_reg + !!i.index_reg)
-
-/* expr e04 expr'
-
- expr' cmpOp e04 expr'
- | Empty */
-static int
-intel_expr ()
-{
- /* XXX Implement the comparison operators. */
- return intel_e04 ();
-}
-
-/* e04 e05 e04'
-
- e04' addOp e05 e04'
- | Empty */
-static int
-intel_e04 ()
-{
- int nregs = -1;
-
- for (;;)
- {
- if (!intel_e05())
- return 0;
-
- if (nregs >= 0 && NUM_ADDRESS_REGS > nregs)
- i.base_reg = i386_regtab + REGNAM_AL; /* al is invalid as base */
-
- if (cur_token.code == '+')
- nregs = -1;
- else if (cur_token.code == '-')
- nregs = NUM_ADDRESS_REGS;
- else
- return 1;
-
- strcat (intel_parser.disp, cur_token.str);
- intel_match_token (cur_token.code);
- }
-}
-
-/* e05 e06 e05'
-
- e05' binOp e06 e05'
- | Empty */
-static int
-intel_e05 ()
-{
- int nregs = ~NUM_ADDRESS_REGS;
-
- for (;;)
- {
- if (!intel_e06())
- return 0;
-
- if (cur_token.code == '&' || cur_token.code == '|' || cur_token.code == '^')
- {
- char str[2];
-
- str[0] = cur_token.code;
- str[1] = 0;
- strcat (intel_parser.disp, str);
- }
- else
- break;
-
- intel_match_token (cur_token.code);
-
- if (nregs < 0)
- nregs = ~nregs;
- }
- if (nregs >= 0 && NUM_ADDRESS_REGS > nregs)
- i.base_reg = i386_regtab + REGNAM_AL + 1; /* cl is invalid as base */
- return 1;
-}
-
-/* e06 e09 e06'
-
- e06' mulOp e09 e06'
- | Empty */
-static int
-intel_e06 ()
-{
- int nregs = ~NUM_ADDRESS_REGS;
-
- for (;;)
- {
- if (!intel_e09())
- return 0;
-
- if (cur_token.code == '*' || cur_token.code == '/' || cur_token.code == '%')
- {
- char str[2];
-
- str[0] = cur_token.code;
- str[1] = 0;
- strcat (intel_parser.disp, str);
- }
- else if (cur_token.code == T_SHL)
- strcat (intel_parser.disp, "<<");
- else if (cur_token.code == T_SHR)
- strcat (intel_parser.disp, ">>");
- else
- break;
-
- intel_match_token (cur_token.code);
-
- if (nregs < 0)
- nregs = ~nregs;
- }
- if (nregs >= 0 && NUM_ADDRESS_REGS > nregs)
- i.base_reg = i386_regtab + REGNAM_AL + 2; /* dl is invalid as base */
- return 1;
-}
-
-/* e09 OFFSET e09
- | SHORT e09
- | + e09
- | - e09
- | ~ e09
- | NOT e09
- | e10 e09'
-
- e09' PTR e10 e09'
- | : e10 e09'
- | Empty */
-static int
-intel_e09 ()
-{
- int nregs = ~NUM_ADDRESS_REGS;
- int in_offset = 0;
-
- for (;;)
- {
- /* Don't consume constants here. */
- if (cur_token.code == '+' || cur_token.code == '-')
- {
- /* Need to look one token ahead - if the next token
- is a constant, the current token is its sign. */
- int next_code;
-
- intel_match_token (cur_token.code);
- next_code = cur_token.code;
- intel_putback_token ();
- if (next_code == T_CONST)
- break;
- }
-
- /* e09 OFFSET e09 */
- if (cur_token.code == T_OFFSET)
- {
- if (!in_offset++)
- ++intel_parser.in_offset;
- }
-
- /* e09 SHORT e09 */
- else if (cur_token.code == T_SHORT)
- intel_parser.op_modifier |= 1 << T_SHORT;
-
- /* e09 + e09 */
- else if (cur_token.code == '+')
- strcat (intel_parser.disp, "+");
-
- /* e09 - e09
- | ~ e09
- | NOT e09 */
- else if (cur_token.code == '-' || cur_token.code == '~')
- {
- char str[2];
-
- if (nregs < 0)
- nregs = ~nregs;
- str[0] = cur_token.code;
- str[1] = 0;
- strcat (intel_parser.disp, str);
- }
-
- /* e09 e10 e09' */
- else
- break;
-
- intel_match_token (cur_token.code);
- }
-
- for (;;)
- {
- if (!intel_e10 ())
- return 0;
-
- /* e09' PTR e10 e09' */
- if (cur_token.code == T_PTR)
- {
- char suffix;
-
- if (prev_token.code == T_BYTE)
- suffix = BYTE_MNEM_SUFFIX;
-
- else if (prev_token.code == T_WORD)
- {
- if (current_templates->start->name[0] == 'l'
- && current_templates->start->name[2] == 's'
- && current_templates->start->name[3] == 0)
- suffix = BYTE_MNEM_SUFFIX; /* so it will cause an error */
- else if (intel_parser.got_a_float == 2) /* "fi..." */
- suffix = SHORT_MNEM_SUFFIX;
- else
- suffix = WORD_MNEM_SUFFIX;
- }
-
- else if (prev_token.code == T_DWORD)
- {
- if (current_templates->start->name[0] == 'l'
- && current_templates->start->name[2] == 's'
- && current_templates->start->name[3] == 0)
- suffix = WORD_MNEM_SUFFIX;
- else if (flag_code == CODE_16BIT
- && (current_templates->start->opcode_modifier
- & (Jump | JumpDword)))
- suffix = LONG_DOUBLE_MNEM_SUFFIX;
- else if (intel_parser.got_a_float == 1) /* "f..." */
- suffix = SHORT_MNEM_SUFFIX;
- else
- suffix = LONG_MNEM_SUFFIX;
- }
-
- else if (prev_token.code == T_FWORD)
- {
- if (current_templates->start->name[0] == 'l'
- && current_templates->start->name[2] == 's'
- && current_templates->start->name[3] == 0)
- suffix = LONG_MNEM_SUFFIX;
- else if (!intel_parser.got_a_float)
- {
- if (flag_code == CODE_16BIT)
- add_prefix (DATA_PREFIX_OPCODE);
- suffix = LONG_DOUBLE_MNEM_SUFFIX;
- }
- else
- suffix = BYTE_MNEM_SUFFIX; /* so it will cause an error */
- }
-
- else if (prev_token.code == T_QWORD)
- {
- if (intel_parser.got_a_float == 1) /* "f..." */
- suffix = LONG_MNEM_SUFFIX;
- else
- suffix = QWORD_MNEM_SUFFIX;
- }
-
- else if (prev_token.code == T_TBYTE)
- {
- if (intel_parser.got_a_float == 1)
- suffix = LONG_DOUBLE_MNEM_SUFFIX;
- else
- suffix = BYTE_MNEM_SUFFIX; /* so it will cause an error */
- }
-
- else if (prev_token.code == T_XMMWORD)
- {
- /* XXX ignored for now, but accepted since gcc uses it */
- suffix = 0;
- }
-
- else
- {
- as_bad (_("Unknown operand modifier `%s'"), prev_token.str);
- return 0;
- }
-
- /* Operands for jump/call using 'ptr' notation denote absolute
- addresses. */
- if (current_templates->start->opcode_modifier & (Jump | JumpDword))
- i.types[this_operand] |= JumpAbsolute;
-
- if (current_templates->start->base_opcode == 0x8d /* lea */)
- ;
- else if (!i.suffix)
- i.suffix = suffix;
- else if (i.suffix != suffix)
- {
- as_bad (_("Conflicting operand modifiers"));
- return 0;
- }
-
- }
-
- /* e09' : e10 e09' */
- else if (cur_token.code == ':')
- {
- if (prev_token.code != T_REG)
- {
- /* While {call,jmp} SSSS:OOOO is MASM syntax only when SSSS is a
- segment/group identifier (which we don't have), using comma
- as the operand separator there is even less consistent, since
- there all branches only have a single operand. */
- if (this_operand != 0
- || intel_parser.in_offset
- || intel_parser.in_bracket
- || (!(current_templates->start->opcode_modifier
- & (Jump|JumpDword|JumpInterSegment))
- && !(current_templates->start->operand_types[0]
- & JumpAbsolute)))
- return intel_match_token (T_NIL);
- /* Remember the start of the 2nd operand and terminate 1st
- operand here.
- XXX This isn't right, yet (when SSSS:OOOO is right operand of
- another expression), but it gets at least the simplest case
- (a plain number or symbol on the left side) right. */
- intel_parser.next_operand = intel_parser.op_string;
- *--intel_parser.op_string = '\0';
- return intel_match_token (':');
- }
- }
-
- /* e09' Empty */
- else
- break;
-
- intel_match_token (cur_token.code);
-
- }
-
- if (in_offset)
- {
- --intel_parser.in_offset;
- if (nregs < 0)
- nregs = ~nregs;
- if (NUM_ADDRESS_REGS > nregs)
- {
- as_bad (_("Invalid operand to `OFFSET'"));
- return 0;
- }
- intel_parser.op_modifier |= 1 << T_OFFSET;
- }
-
- if (nregs >= 0 && NUM_ADDRESS_REGS > nregs)
- i.base_reg = i386_regtab + REGNAM_AL + 3; /* bl is invalid as base */
- return 1;
-}
-
-static int
-intel_bracket_expr ()
-{
- int was_offset = intel_parser.op_modifier & (1 << T_OFFSET);
- const char *start = intel_parser.op_string;
- int len;
-
- if (i.op[this_operand].regs)
- return intel_match_token (T_NIL);
-
- intel_match_token ('[');
-
- /* Mark as a memory operand only if it's not already known to be an
- offset expression. If it's an offset expression, we need to keep
- the brace in. */
- if (!intel_parser.in_offset)
- {
- ++intel_parser.in_bracket;
-
- /* Operands for jump/call inside brackets denote absolute addresses. */
- if (current_templates->start->opcode_modifier & (Jump | JumpDword))
- i.types[this_operand] |= JumpAbsolute;
-
- /* Unfortunately gas always diverged from MASM in a respect that can't
- be easily fixed without risking to break code sequences likely to be
- encountered (the testsuite even check for this): MASM doesn't consider
- an expression inside brackets unconditionally as a memory reference.
- When that is e.g. a constant, an offset expression, or the sum of the
- two, this is still taken as a constant load. gas, however, always
- treated these as memory references. As a compromise, we'll try to make
- offset expressions inside brackets work the MASM way (since that's
- less likely to be found in real world code), but make constants alone
- continue to work the traditional gas way. In either case, issue a
- warning. */
- intel_parser.op_modifier &= ~was_offset;
- }
- else
- strcat (intel_parser.disp, "[");
-
- /* Add a '+' to the displacement string if necessary. */
- if (*intel_parser.disp != '\0'
- && *(intel_parser.disp + strlen (intel_parser.disp) - 1) != '+')
- strcat (intel_parser.disp, "+");
-
- if (intel_expr ()
- && (len = intel_parser.op_string - start - 1,
- intel_match_token (']')))
- {
- /* Preserve brackets when the operand is an offset expression. */
- if (intel_parser.in_offset)
- strcat (intel_parser.disp, "]");
- else
- {
- --intel_parser.in_bracket;
- if (i.base_reg || i.index_reg)
- intel_parser.is_mem = 1;
- if (!intel_parser.is_mem)
- {
- if (!(intel_parser.op_modifier & (1 << T_OFFSET)))
- /* Defer the warning until all of the operand was parsed. */
- intel_parser.is_mem = -1;
- else if (!quiet_warnings)
- as_warn (_("`[%.*s]' taken to mean just `%.*s'"), len, start, len, start);
- }
- }
- intel_parser.op_modifier |= was_offset;
-
- return 1;
- }
- return 0;
-}
-
-/* e10 e11 e10'
-
- e10' [ expr ] e10'
- | Empty */
-static int
-intel_e10 ()
-{
- if (!intel_e11 ())
- return 0;
-
- while (cur_token.code == '[')
- {
- if (!intel_bracket_expr ())
- return 0;
- }
-
- return 1;
-}
-
-/* e11 ( expr )
- | [ expr ]
- | BYTE
- | WORD
- | DWORD
- | FWORD
- | QWORD
- | TBYTE
- | OWORD
- | XMMWORD
- | $
- | .
- | register
- | id
- | constant */
-static int
-intel_e11 ()
-{
- switch (cur_token.code)
- {
- /* e11 ( expr ) */
- case '(':
- intel_match_token ('(');
- strcat (intel_parser.disp, "(");
-
- if (intel_expr () && intel_match_token (')'))
- {
- strcat (intel_parser.disp, ")");
- return 1;
- }
- return 0;
-
- /* e11 [ expr ] */
- case '[':
- return intel_bracket_expr ();
-
- /* e11 $
- | . */
- case '.':
- strcat (intel_parser.disp, cur_token.str);
- intel_match_token (cur_token.code);
-
- /* Mark as a memory operand only if it's not already known to be an
- offset expression. */
- if (!intel_parser.in_offset)
- intel_parser.is_mem = 1;
-
- return 1;
-
- /* e11 register */
- case T_REG:
- {
- const reg_entry *reg = intel_parser.reg = cur_token.reg;
-
- intel_match_token (T_REG);
-
- /* Check for segment change. */
- if (cur_token.code == ':')
- {
- if (!(reg->reg_type & (SReg2 | SReg3)))
- {
- as_bad (_("`%s' is not a valid segment register"), reg->reg_name);
- return 0;
- }
- else if (i.seg[i.mem_operands])
- as_warn (_("Extra segment override ignored"));
- else
- {
- if (!intel_parser.in_offset)
- intel_parser.is_mem = 1;
- switch (reg->reg_num)
- {
- case 0:
- i.seg[i.mem_operands] = &es;
- break;
- case 1:
- i.seg[i.mem_operands] = &cs;
- break;
- case 2:
- i.seg[i.mem_operands] = &ss;
- break;
- case 3:
- i.seg[i.mem_operands] = &ds;
- break;
- case 4:
- i.seg[i.mem_operands] = &fs;
- break;
- case 5:
- i.seg[i.mem_operands] = &gs;
- break;
- }
- }
- }
-
- /* Not a segment register. Check for register scaling. */
- else if (cur_token.code == '*')
- {
- if (!intel_parser.in_bracket)
- {
- as_bad (_("Register scaling only allowed in memory operands"));
- return 0;
- }
-
- if (reg->reg_type & Reg16) /* Disallow things like [si*1]. */
- reg = i386_regtab + REGNAM_AX + 4; /* sp is invalid as index */
- else if (i.index_reg)
- reg = i386_regtab + REGNAM_EAX + 4; /* esp is invalid as index */
-
- /* What follows must be a valid scale. */
- intel_match_token ('*');
- i.index_reg = reg;
- i.types[this_operand] |= BaseIndex;
-
- /* Set the scale after setting the register (otherwise,
- i386_scale will complain) */
- if (cur_token.code == '+' || cur_token.code == '-')
- {
- char *str, sign = cur_token.code;
- intel_match_token (cur_token.code);
- if (cur_token.code != T_CONST)
- {
- as_bad (_("Syntax error: Expecting a constant, got `%s'"),
- cur_token.str);
- return 0;
- }
- str = (char *) xmalloc (strlen (cur_token.str) + 2);
- strcpy (str + 1, cur_token.str);
- *str = sign;
- if (!i386_scale (str))
- return 0;
- free (str);
- }
- else if (!i386_scale (cur_token.str))
- return 0;
- intel_match_token (cur_token.code);
- }
-
- /* No scaling. If this is a memory operand, the register is either a
- base register (first occurrence) or an index register (second
- occurrence). */
- else if (intel_parser.in_bracket && !(reg->reg_type & (SReg2 | SReg3)))
- {
-
- if (!i.base_reg)
- i.base_reg = reg;
- else if (!i.index_reg)
- i.index_reg = reg;
- else
- {
- as_bad (_("Too many register references in memory operand"));
- return 0;
- }
-
- i.types[this_operand] |= BaseIndex;
- }
-
- /* Offset modifier. Add the register to the displacement string to be
- parsed as an immediate expression after we're done. */
- else if (intel_parser.in_offset)
- {
- as_warn (_("Using register names in OFFSET expressions is deprecated"));
- strcat (intel_parser.disp, reg->reg_name);
- }
-
- /* It's neither base nor index nor offset. */
- else if (!intel_parser.is_mem)
- {
- i.types[this_operand] |= reg->reg_type & ~BaseIndex;
- i.op[this_operand].regs = reg;
- i.reg_operands++;
- }
- else
- {
- as_bad (_("Invalid use of register"));
- return 0;
- }
-
- /* Since registers are not part of the displacement string (except
- when we're parsing offset operands), we may need to remove any
- preceding '+' from the displacement string. */
- if (*intel_parser.disp != '\0'
- && !intel_parser.in_offset)
- {
- char *s = intel_parser.disp;
- s += strlen (s) - 1;
- if (*s == '+')
- *s = '\0';
- }
-
- return 1;
- }
-
- /* e11 BYTE
- | WORD
- | DWORD
- | FWORD
- | QWORD
- | TBYTE
- | OWORD
- | XMMWORD */
- case T_BYTE:
- case T_WORD:
- case T_DWORD:
- case T_FWORD:
- case T_QWORD:
- case T_TBYTE:
- case T_XMMWORD:
- intel_match_token (cur_token.code);
-
- if (cur_token.code == T_PTR)
- return 1;
-
- /* It must have been an identifier. */
- intel_putback_token ();
- cur_token.code = T_ID;
- /* FALLTHRU */
-
- /* e11 id
- | constant */
- case T_ID:
- if (!intel_parser.in_offset && intel_parser.is_mem <= 0)
- {
- symbolS *symbolP;
-
- /* The identifier represents a memory reference only if it's not
- preceded by an offset modifier and if it's not an equate. */
- symbolP = symbol_find(cur_token.str);
- if (!symbolP || S_GET_SEGMENT(symbolP) != absolute_section)
- intel_parser.is_mem = 1;
- }
- /* FALLTHRU */
-
- case T_CONST:
- case '-':
- case '+':
- {
- char *save_str, sign = 0;
-
- /* Allow constants that start with `+' or `-'. */
- if (cur_token.code == '-' || cur_token.code == '+')
- {
- sign = cur_token.code;
- intel_match_token (cur_token.code);
- if (cur_token.code != T_CONST)
- {
- as_bad (_("Syntax error: Expecting a constant, got `%s'"),
- cur_token.str);
- return 0;
- }
- }
-
- save_str = (char *) xmalloc (strlen (cur_token.str) + 2);
- strcpy (save_str + !!sign, cur_token.str);
- if (sign)
- *save_str = sign;
-
- /* Get the next token to check for register scaling. */
- intel_match_token (cur_token.code);
-
- /* Check if this constant is a scaling factor for an index register. */
- if (cur_token.code == '*')
- {
- if (intel_match_token ('*') && cur_token.code == T_REG)
- {
- const reg_entry *reg = cur_token.reg;
-
- if (!intel_parser.in_bracket)
- {
- as_bad (_("Register scaling only allowed in memory operands"));
- return 0;
- }
-
- if (reg->reg_type & Reg16) /* Disallow things like [1*si]. */
- reg = i386_regtab + REGNAM_AX + 4; /* sp is invalid as index */
- else if (i.index_reg)
- reg = i386_regtab + REGNAM_EAX + 4; /* esp is invalid as index */
-
- /* The constant is followed by `* reg', so it must be
- a valid scale. */
- i.index_reg = reg;
- i.types[this_operand] |= BaseIndex;
-
- /* Set the scale after setting the register (otherwise,
- i386_scale will complain) */
- if (!i386_scale (save_str))
- return 0;
- intel_match_token (T_REG);
-
- /* Since registers are not part of the displacement
- string, we may need to remove any preceding '+' from
- the displacement string. */
- if (*intel_parser.disp != '\0')
- {
- char *s = intel_parser.disp;
- s += strlen (s) - 1;
- if (*s == '+')
- *s = '\0';
- }
-
- free (save_str);
-
- return 1;
- }
-
- /* The constant was not used for register scaling. Since we have
- already consumed the token following `*' we now need to put it
- back in the stream. */
- intel_putback_token ();
- }
-
- /* Add the constant to the displacement string. */
- strcat (intel_parser.disp, save_str);
- free (save_str);
-
- return 1;
- }
- }
-
- as_bad (_("Unrecognized token '%s'"), cur_token.str);
- return 0;
-}
-
-/* Match the given token against cur_token. If they match, read the next
- token from the operand string. */
-static int
-intel_match_token (code)
- int code;
-{
- if (cur_token.code == code)
- {
- intel_get_token ();
- return 1;
- }
- else
- {
- as_bad (_("Unexpected token `%s'"), cur_token.str);
- return 0;
+ };
+ return GOT_symbol;
}
+ return 0;
}
-/* Read a new token from intel_parser.op_string and store it in cur_token. */
-static void
-intel_get_token ()
-{
- char *end_op;
- const reg_entry *reg;
- struct intel_token new_token;
+/* Round up a section size to the appropriate boundary. */
- new_token.code = T_NIL;
- new_token.reg = NULL;
- new_token.str = NULL;
+valueT
+md_section_align (segment, size)
+ segT segment ATTRIBUTE_UNUSED;
+ valueT size;
+{
+#if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
+ if (OUTPUT_FLAVOR == bfd_target_aout_flavour)
+ {
+ /* For a.out, force the section size to be aligned. If we don't do
+ this, BFD will align it for us, but it will not write out the
+ final bytes of the section. This may be a bug in BFD, but it is
+ easier to fix it here since that is how the other a.out targets
+ work. */
+ int align;
- /* Free the memory allocated to the previous token and move
- cur_token to prev_token. */
- if (prev_token.str)
- free (prev_token.str);
+ align = bfd_get_section_alignment (stdoutput, segment);
+ size = ((size + (1 << align) - 1) & ((valueT) -1 << align));
+ }
+#endif
- prev_token = cur_token;
+ return size;
+}
- /* Skip whitespace. */
- while (is_space_char (*intel_parser.op_string))
- intel_parser.op_string++;
+/* On the i386, PC-relative offsets are relative to the start of the
+ next instruction. That is, the address of the offset, plus its
+ size, since the offset is always the last part of the insn. */
- /* Return an empty token if we find nothing else on the line. */
- if (*intel_parser.op_string == '\0')
- {
- cur_token = new_token;
- return;
- }
+long
+md_pcrel_from (fixS *fixP)
+{
+ return fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address;
+}
- /* The new token cannot be larger than the remainder of the operand
- string. */
- new_token.str = (char *) xmalloc (strlen (intel_parser.op_string) + 1);
- new_token.str[0] = '\0';
+#ifndef I386COFF
- if (strchr ("0123456789", *intel_parser.op_string))
- {
- char *p = new_token.str;
- char *q = intel_parser.op_string;
- new_token.code = T_CONST;
+static void
+s_bss (int ignore ATTRIBUTE_UNUSED)
+{
+ int temp;
- /* Allow any kind of identifier char to encompass floating point and
- hexadecimal numbers. */
- while (is_identifier_char (*q))
- *p++ = *q++;
- *p = '\0';
+#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
+ if (IS_ELF)
+ obj_elf_section_change_hook ();
+#endif
+ temp = get_absolute_expression ();
+ subseg_set (bss_section, (subsegT) temp);
+ demand_empty_rest_of_line ();
+}
- /* Recognize special symbol names [0-9][bf]. */
- if (strlen (intel_parser.op_string) == 2
- && (intel_parser.op_string[1] == 'b'
- || intel_parser.op_string[1] == 'f'))
- new_token.code = T_ID;
- }
+#endif
- else if ((*intel_parser.op_string == REGISTER_PREFIX || allow_naked_reg)
- && ((reg = parse_register (intel_parser.op_string, &end_op)) != NULL))
+void
+i386_validate_fix (fixS *fixp)
+{
+ if (fixp->fx_subsy && fixp->fx_subsy == GOT_symbol)
{
- new_token.code = T_REG;
- new_token.reg = reg;
-
- if (*intel_parser.op_string == REGISTER_PREFIX)
+ if (fixp->fx_r_type == BFD_RELOC_32_PCREL)
{
- new_token.str[0] = REGISTER_PREFIX;
- new_token.str[1] = '\0';
+ if (!object_64bit)
+ abort ();
+ fixp->fx_r_type = BFD_RELOC_X86_64_GOTPCREL;
}
-
- strcat (new_token.str, reg->reg_name);
+ else
+ {
+ if (!object_64bit)
+ fixp->fx_r_type = BFD_RELOC_386_GOTOFF;
+ else
+ fixp->fx_r_type = BFD_RELOC_X86_64_GOTOFF64;
+ }
+ fixp->fx_subsy = 0;
}
+}
- else if (is_identifier_char (*intel_parser.op_string))
- {
- char *p = new_token.str;
- char *q = intel_parser.op_string;
+arelent *
+tc_gen_reloc (section, fixp)
+ asection *section ATTRIBUTE_UNUSED;
+ fixS *fixp;
+{
+ arelent *rel;
+ bfd_reloc_code_real_type code;
- /* A '.' or '$' followed by an identifier char is an identifier.
- Otherwise, it's operator '.' followed by an expression. */
- if ((*q == '.' || *q == '$') && !is_identifier_char (*(q + 1)))
+ switch (fixp->fx_r_type)
+ {
+ case BFD_RELOC_X86_64_PLT32:
+ case BFD_RELOC_X86_64_GOT32:
+ case BFD_RELOC_X86_64_GOTPCREL:
+ case BFD_RELOC_386_PLT32:
+ case BFD_RELOC_386_GOT32:
+ case BFD_RELOC_386_GOTOFF:
+ case BFD_RELOC_386_GOTPC:
+ case BFD_RELOC_386_TLS_GD:
+ case BFD_RELOC_386_TLS_LDM:
+ case BFD_RELOC_386_TLS_LDO_32:
+ case BFD_RELOC_386_TLS_IE_32:
+ case BFD_RELOC_386_TLS_IE:
+ case BFD_RELOC_386_TLS_GOTIE:
+ case BFD_RELOC_386_TLS_LE_32:
+ case BFD_RELOC_386_TLS_LE:
+ case BFD_RELOC_386_TLS_GOTDESC:
+ case BFD_RELOC_386_TLS_DESC_CALL:
+ case BFD_RELOC_X86_64_TLSGD:
+ case BFD_RELOC_X86_64_TLSLD:
+ case BFD_RELOC_X86_64_DTPOFF32:
+ case BFD_RELOC_X86_64_DTPOFF64:
+ case BFD_RELOC_X86_64_GOTTPOFF:
+ case BFD_RELOC_X86_64_TPOFF32:
+ case BFD_RELOC_X86_64_TPOFF64:
+ case BFD_RELOC_X86_64_GOTOFF64:
+ case BFD_RELOC_X86_64_GOTPC32:
+ case BFD_RELOC_X86_64_GOT64:
+ case BFD_RELOC_X86_64_GOTPCREL64:
+ case BFD_RELOC_X86_64_GOTPC64:
+ case BFD_RELOC_X86_64_GOTPLT64:
+ case BFD_RELOC_X86_64_PLTOFF64:
+ case BFD_RELOC_X86_64_GOTPC32_TLSDESC:
+ case BFD_RELOC_X86_64_TLSDESC_CALL:
+ case BFD_RELOC_RVA:
+ case BFD_RELOC_VTABLE_ENTRY:
+ case BFD_RELOC_VTABLE_INHERIT:
+#ifdef TE_PE
+ case BFD_RELOC_32_SECREL:
+#endif
+ code = fixp->fx_r_type;
+ break;
+ case BFD_RELOC_X86_64_32S:
+ if (!fixp->fx_pcrel)
{
- new_token.code = '.';
- new_token.str[0] = '.';
- new_token.str[1] = '\0';
+ /* Don't turn BFD_RELOC_X86_64_32S into BFD_RELOC_32. */
+ code = fixp->fx_r_type;
+ break;
}
- else
+ default:
+ if (fixp->fx_pcrel)
{
- while (is_identifier_char (*q) || *q == '@')
- *p++ = *q++;
- *p = '\0';
-
- if (strcasecmp (new_token.str, "NOT") == 0)
- new_token.code = '~';
-
- else if (strcasecmp (new_token.str, "MOD") == 0)
- new_token.code = '%';
-
- else if (strcasecmp (new_token.str, "AND") == 0)
- new_token.code = '&';
-
- else if (strcasecmp (new_token.str, "OR") == 0)
- new_token.code = '|';
-
- else if (strcasecmp (new_token.str, "XOR") == 0)
- new_token.code = '^';
-
- else if (strcasecmp (new_token.str, "SHL") == 0)
- new_token.code = T_SHL;
-
- else if (strcasecmp (new_token.str, "SHR") == 0)
- new_token.code = T_SHR;
-
- else if (strcasecmp (new_token.str, "BYTE") == 0)
- new_token.code = T_BYTE;
-
- else if (strcasecmp (new_token.str, "WORD") == 0)
- new_token.code = T_WORD;
-
- else if (strcasecmp (new_token.str, "DWORD") == 0)
- new_token.code = T_DWORD;
-
- else if (strcasecmp (new_token.str, "FWORD") == 0)
- new_token.code = T_FWORD;
-
- else if (strcasecmp (new_token.str, "QWORD") == 0)
- new_token.code = T_QWORD;
-
- else if (strcasecmp (new_token.str, "TBYTE") == 0
- /* XXX remove (gcc still uses it) */
- || strcasecmp (new_token.str, "XWORD") == 0)
- new_token.code = T_TBYTE;
-
- else if (strcasecmp (new_token.str, "XMMWORD") == 0
- || strcasecmp (new_token.str, "OWORD") == 0)
- new_token.code = T_XMMWORD;
-
- else if (strcasecmp (new_token.str, "PTR") == 0)
- new_token.code = T_PTR;
-
- else if (strcasecmp (new_token.str, "SHORT") == 0)
- new_token.code = T_SHORT;
-
- else if (strcasecmp (new_token.str, "OFFSET") == 0)
+ switch (fixp->fx_size)
{
- new_token.code = T_OFFSET;
-
- /* ??? This is not mentioned in the MASM grammar but gcc
- makes use of it with -mintel-syntax. OFFSET may be
- followed by FLAT: */
- if (strncasecmp (q, " FLAT:", 6) == 0)
- strcat (new_token.str, " FLAT:");
+ default:
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("can not do %d byte pc-relative relocation"),
+ fixp->fx_size);
+ code = BFD_RELOC_32_PCREL;
+ break;
+ case 1: code = BFD_RELOC_8_PCREL; break;
+ case 2: code = BFD_RELOC_16_PCREL; break;
+ case 4: code = BFD_RELOC_32_PCREL; break;
+#ifdef BFD64
+ case 8: code = BFD_RELOC_64_PCREL; break;
+#endif
}
-
- /* ??? This is not mentioned in the MASM grammar. */
- else if (strcasecmp (new_token.str, "FLAT") == 0)
+ }
+ else
+ {
+ switch (fixp->fx_size)
{
- new_token.code = T_OFFSET;
- if (*q == ':')
- strcat (new_token.str, ":");
- else
- as_bad (_("`:' expected"));
+ default:
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("can not do %d byte relocation"),
+ fixp->fx_size);
+ code = BFD_RELOC_32;
+ break;
+ case 1: code = BFD_RELOC_8; break;
+ case 2: code = BFD_RELOC_16; break;
+ case 4: code = BFD_RELOC_32; break;
+#ifdef BFD64
+ case 8: code = BFD_RELOC_64; break;
+#endif
}
-
- else
- new_token.code = T_ID;
}
+ break;
}
- else if (strchr ("+-/*%|&^:[]()~", *intel_parser.op_string))
+ if ((code == BFD_RELOC_32
+ || code == BFD_RELOC_32_PCREL
+ || code == BFD_RELOC_X86_64_32S)
+ && GOT_symbol
+ && fixp->fx_addsy == GOT_symbol)
{
- new_token.code = *intel_parser.op_string;
- new_token.str[0] = *intel_parser.op_string;
- new_token.str[1] = '\0';
+ if (!object_64bit)
+ code = BFD_RELOC_386_GOTPC;
+ else
+ code = BFD_RELOC_X86_64_GOTPC32;
}
-
- else if (strchr ("<>", *intel_parser.op_string)
- && *intel_parser.op_string == *(intel_parser.op_string + 1))
+ if ((code == BFD_RELOC_64 || code == BFD_RELOC_64_PCREL)
+ && GOT_symbol
+ && fixp->fx_addsy == GOT_symbol)
{
- new_token.code = *intel_parser.op_string == '<' ? T_SHL : T_SHR;
- new_token.str[0] = *intel_parser.op_string;
- new_token.str[1] = *intel_parser.op_string;
- new_token.str[2] = '\0';
+ code = BFD_RELOC_X86_64_GOTPC64;
}
- else
- as_bad (_("Unrecognized token `%s'"), intel_parser.op_string);
+ rel = (arelent *) xmalloc (sizeof (arelent));
+ rel->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
+ *rel->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
- intel_parser.op_string += strlen (new_token.str);
- cur_token = new_token;
-}
+ rel->address = fixp->fx_frag->fr_address + fixp->fx_where;
-/* Put cur_token back into the token stream and make cur_token point to
- prev_token. */
-static void
-intel_putback_token ()
-{
- if (cur_token.code != T_NIL)
+ if (!use_rela_relocations)
{
- intel_parser.op_string -= strlen (cur_token.str);
- free (cur_token.str);
- }
- cur_token = prev_token;
-
- /* Forget prev_token. */
- prev_token.code = T_NIL;
- prev_token.reg = NULL;
- prev_token.str = NULL;
-}
-
-int
-tc_x86_regname_to_dw2regnum (const char *regname)
-{
- unsigned int regnum;
- unsigned int regnames_count;
- static const char *const regnames_32[] =
- {
- "eax", "ecx", "edx", "ebx",
- "esp", "ebp", "esi", "edi",
- "eip", "eflags", NULL,
- "st0", "st1", "st2", "st3",
- "st4", "st5", "st6", "st7",
- NULL, NULL,
- "xmm0", "xmm1", "xmm2", "xmm3",
- "xmm4", "xmm5", "xmm6", "xmm7",
- "mm0", "mm1", "mm2", "mm3",
- "mm4", "mm5", "mm6", "mm7"
- };
- static const char *const regnames_64[] =
- {
- "rax", "rdx", "rcx", "rbx",
- "rsi", "rdi", "rbp", "rsp",
- "r8", "r9", "r10", "r11",
- "r12", "r13", "r14", "r15",
- "rip",
- "xmm0", "xmm1", "xmm2", "xmm3",
- "xmm4", "xmm5", "xmm6", "xmm7",
- "xmm8", "xmm9", "xmm10", "xmm11",
- "xmm12", "xmm13", "xmm14", "xmm15",
- "st0", "st1", "st2", "st3",
- "st4", "st5", "st6", "st7",
- "mm0", "mm1", "mm2", "mm3",
- "mm4", "mm5", "mm6", "mm7"
- };
- const char *const *regnames;
+ /* HACK: Since i386 ELF uses Rel instead of Rela, encode the
+ vtable entry to be used in the relocation's section offset. */
+ if (fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
+ rel->address = fixp->fx_offset;
- if (flag_code == CODE_64BIT)
- {
- regnames = regnames_64;
- regnames_count = ARRAY_SIZE (regnames_64);
+ rel->addend = 0;
}
+ /* Use the rela in 64bit mode. */
else
{
- regnames = regnames_32;
- regnames_count = ARRAY_SIZE (regnames_32);
+ if (!fixp->fx_pcrel)
+ rel->addend = fixp->fx_offset;
+ else
+ switch (code)
+ {
+ case BFD_RELOC_X86_64_PLT32:
+ case BFD_RELOC_X86_64_GOT32:
+ case BFD_RELOC_X86_64_GOTPCREL:
+ case BFD_RELOC_X86_64_TLSGD:
+ case BFD_RELOC_X86_64_TLSLD:
+ case BFD_RELOC_X86_64_GOTTPOFF:
+ case BFD_RELOC_X86_64_GOTPC32_TLSDESC:
+ case BFD_RELOC_X86_64_TLSDESC_CALL:
+ rel->addend = fixp->fx_offset - fixp->fx_size;
+ break;
+ default:
+ rel->addend = (section->vma
+ - fixp->fx_size
+ + fixp->fx_addnumber
+ + md_pcrel_from (fixp));
+ break;
+ }
+ }
+
+ rel->howto = bfd_reloc_type_lookup (stdoutput, code);
+ if (rel->howto == NULL)
+ {
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("cannot represent relocation type %s"),
+ bfd_get_reloc_code_name (code));
+ /* Set howto to a garbage value so that we can keep going. */
+ rel->howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_32);
+ assert (rel->howto != NULL);
}
- for (regnum = 0; regnum < regnames_count; regnum++)
- if (regnames[regnum] != NULL
- && strcmp (regname, regnames[regnum]) == 0)
- return regnum;
+ return rel;
+}
+
+#include "tc-i386-intel.c"
- return -1;
+void
+tc_x86_parse_to_dw2regnum (expressionS *exp)
+{
+ int saved_naked_reg;
+ char saved_register_dot;
+
+ saved_naked_reg = allow_naked_reg;
+ allow_naked_reg = 1;
+ saved_register_dot = register_chars['.'];
+ register_chars['.'] = '.';
+ allow_pseudo_reg = 1;
+ expression_and_evaluate (exp);
+ allow_pseudo_reg = 0;
+ register_chars['.'] = saved_register_dot;
+ allow_naked_reg = saved_naked_reg;
+
+ if (exp->X_op == O_register && exp->X_add_number >= 0)
+ {
+ if ((addressT) exp->X_add_number < i386_regtab_size)
+ {
+ exp->X_op = O_constant;
+ exp->X_add_number = i386_regtab[exp->X_add_number]
+ .dw2_regnum[flag_code >> 1];
+ }
+ else
+ exp->X_op = O_illegal;
+ }
}
void
tc_x86_frame_initial_instructions (void)
{
- static unsigned int sp_regno;
+ static unsigned int sp_regno[2];
- if (!sp_regno)
- sp_regno = tc_x86_regname_to_dw2regnum (flag_code == CODE_64BIT
- ? "rsp" : "esp");
+ if (!sp_regno[flag_code >> 1])
+ {
+ char *saved_input = input_line_pointer;
+ char sp[][4] = {"esp", "rsp"};
+ expressionS exp;
+
+ input_line_pointer = sp[flag_code >> 1];
+ tc_x86_parse_to_dw2regnum (&exp);
+ assert (exp.X_op == O_constant);
+ sp_regno[flag_code >> 1] = exp.X_add_number;
+ input_line_pointer = saved_input;
+ }
- cfi_add_CFA_def_cfa (sp_regno, -x86_cie_data_alignment);
+ cfi_add_CFA_def_cfa (sp_regno[flag_code >> 1], -x86_cie_data_alignment);
cfi_add_CFA_offset (x86_dwarf2_return_column, x86_cie_data_alignment);
}
return -1;
}
+#ifdef TE_SOLARIS
+void
+i386_solaris_fix_up_eh_frame (segT sec)
+{
+ if (flag_code == CODE_64BIT)
+ elf_section_type (sec) = SHT_X86_64_UNWIND;
+}
+#endif
+
#ifdef TE_PE
void
tc_pe_dwarf2_emit_offset (symbolS *symbol, unsigned int size)
#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
/* For ELF on x86-64, add support for SHF_X86_64_LARGE. */
-int
+bfd_vma
x86_64_section_letter (int letter, char **ptr_msg)
{
if (flag_code == CODE_64BIT)
return SHF_X86_64_LARGE;
*ptr_msg = _("Bad .section directive: want a,l,w,x,M,S,G,T in string");
- }
+ }
else
- *ptr_msg = _("Bad .section directive: want a,w,x,M,S,G,T in string");
+ *ptr_msg = _("Bad .section directive: want a,w,x,M,S,G,T in string");
return -1;
}
-int
+bfd_vma
x86_64_section_word (char *str, size_t len)
{
- if (len == 5 && flag_code == CODE_64BIT && strncmp (str, "large", 5) == 0)
+ if (len == 5 && flag_code == CODE_64BIT && CONST_STRNEQ (str, "large"))
return SHF_X86_64_LARGE;
return -1;
projects / deliverable / binutils-gdb.git / blobdiff