/* i386.c -- Assemble code for the Intel 80386
- Copyright (C) 1989, 91, 92, 93, 94, 95, 96, 97, 98, 99, 2000
+ Copyright 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ 2000, 2001
Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
/* Intel 80386 machine specific gas.
Written by Eliot Dresselhaus (eliot@mgm.mit.edu).
+ x86_64 support by Jan Hubicka (jh@suse.cz)
Bugs & suggestions are completely welcome. This is free software.
Please help us make it better. */
#include "as.h"
#include "subsegs.h"
+#include "dwarf2dbg.h"
#include "opcode/i386.h"
#ifndef REGISTER_WARNINGS
static int fits_in_unsigned_byte PARAMS ((offsetT));
static int fits_in_unsigned_word PARAMS ((offsetT));
static int fits_in_signed_word PARAMS ((offsetT));
+static int fits_in_unsigned_long PARAMS ((offsetT));
+static int fits_in_signed_long PARAMS ((offsetT));
static int smallest_imm_type PARAMS ((offsetT));
static offsetT offset_in_range PARAMS ((offsetT, int));
static int add_prefix PARAMS ((unsigned int));
-static void set_16bit_code_flag PARAMS ((int));
+static void set_code_flag PARAMS ((int));
static void set_16bit_gcc_code_flag PARAMS ((int));
static void set_intel_syntax PARAMS ((int));
static void set_cpu_arch PARAMS ((int));
#ifdef BFD_ASSEMBLER
static bfd_reloc_code_real_type reloc
- PARAMS ((int, int, bfd_reloc_code_real_type));
+ PARAMS ((int, int, int, bfd_reloc_code_real_type));
+#define RELOC_ENUM enum bfd_reloc_code_real
+#else
+#define RELOC_ENUM int
+#endif
+
+#ifndef DEFAULT_ARCH
+#define DEFAULT_ARCH "i386"
#endif
+static char *default_arch = DEFAULT_ARCH;
/* 'md_assemble ()' gathers together information and puts it into a
i386_insn. */
operand. */
union i386_op op[MAX_OPERANDS];
+ /* Flags for operands. */
+ unsigned int flags[MAX_OPERANDS];
+#define Operand_PCrel 1
+
/* Relocation type for operand */
-#ifdef BFD_ASSEMBLER
- enum bfd_reloc_code_real disp_reloc[MAX_OPERANDS];
-#else
- int disp_reloc[MAX_OPERANDS];
-#endif
+ RELOC_ENUM reloc[MAX_OPERANDS];
/* BASE_REG, INDEX_REG, and LOG2_SCALE_FACTOR are used to encode
the base index byte below. */
addressing modes of this insn are encoded. */
modrm_byte rm;
+ rex_byte rex;
sib_byte sib;
};
/* This array holds the chars that always start a comment. If the
pre-processor is disabled, these aren't very useful. */
-#if defined (TE_I386AIX) || ((defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)) && ! defined (TE_LINUX) && !defined(TE_FreeBSD))
+#if defined (TE_I386AIX) || ((defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)) && ! defined (TE_LINUX) && !defined(TE_FreeBSD) && !defined(TE_NetBSD))
/* Putting '/' here makes it impossible to use the divide operator.
However, we need it for compatibility with SVR4 systems. */
const char comment_chars[] = "#/";
#NO_APP at the beginning of its output.
Also note that comments started like this one will always work if
'/' isn't otherwise defined. */
-#if defined (TE_I386AIX) || ((defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)) && ! defined (TE_LINUX) && !defined(TE_FreeBSD))
+#if defined (TE_I386AIX) || ((defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)) && ! defined (TE_LINUX) && !defined(TE_FreeBSD) && !defined(TE_NetBSD))
const char line_comment_chars[] = "";
#else
const char line_comment_chars[] = "/";
/* Current operand we are working on. */
static int this_operand;
-/* 1 if we're writing 16-bit code,
- 0 if 32-bit. */
-static int flag_16bit_code;
+/* We support four different modes. FLAG_CODE variable is used to distinguish
+ these. */
+
+enum flag_code {
+ CODE_32BIT,
+ CODE_16BIT,
+ CODE_64BIT };
+#define NUM_FLAG_CODE ((int) CODE_64BIT + 1)
+
+static enum flag_code flag_code;
+static int use_rela_relocations = 0;
+
+/* The names used to print error messages. */
+static const char *flag_code_names[] =
+ {
+ "32",
+ "16",
+ "64"
+ };
/* 1 for intel syntax,
0 if att syntax. */
static const char *cpu_arch_name = NULL;
/* CPU feature flags. */
-static unsigned int cpu_arch_flags = 0;
+static unsigned int cpu_arch_flags = CpuUnknownFlags|CpuNo64;
+
+/* If set, conditional jumps are not automatically promoted to handle
+ larger than a byte offset. */
+static unsigned int no_cond_jump_promotion = 0;
/* Interface to relax_segment.
- There are 2 relax states for 386 jump insns: one for conditional &
- one for unconditional jumps. This is because these two types of
- jumps add different sizes to frags when we're figuring out what
- sort of jump to choose to reach a given label. */
+ There are 3 major relax states for 386 jump insns because the
+ different types of jumps add different sizes to frags when we're
+ figuring out what sort of jump to choose to reach a given label. */
/* Types. */
+#define UNCOND_JUMP 0
#define COND_JUMP 1
-#define UNCOND_JUMP 2
+#define COND_JUMP86 2
+
/* Sizes. */
#define CODE16 1
#define SMALL 0
#endif
#endif
-#define ENCODE_RELAX_STATE(type,size) \
- ((relax_substateT)((type<<2) | (size)))
-#define SIZE_FROM_RELAX_STATE(s) \
- ( (((s) & 0x3) == BIG ? 4 : (((s) & 0x3) == BIG16 ? 2 : 1)) )
+#define ENCODE_RELAX_STATE(type, size) \
+ ((relax_substateT) (((type) << 2) | (size)))
+#define TYPE_FROM_RELAX_STATE(s) \
+ ((s) >> 2)
+#define DISP_SIZE_FROM_RELAX_STATE(s) \
+ ((((s) & 3) == BIG ? 4 : (((s) & 3) == BIG16 ? 2 : 1)))
/* This table is used by relax_frag to promote short jumps to long
ones where necessary. SMALL (short) jumps may be promoted to BIG
/* The fields are:
1) most positive reach of this state,
2) most negative reach of this state,
- 3) how many bytes this mode will add to the size of the current frag
+ 3) how many bytes this mode will have in the variable part of the frag
4) which index into the table to try if we can't fit into this one. */
- {1, 1, 0, 0},
- {1, 1, 0, 0},
- {1, 1, 0, 0},
- {1, 1, 0, 0},
-
- {127 + 1, -128 + 1, 0, ENCODE_RELAX_STATE (COND_JUMP, BIG)},
- {127 + 1, -128 + 1, 0, ENCODE_RELAX_STATE (COND_JUMP, BIG16)},
- /* dword conditionals adds 4 bytes to frag:
- 1 extra opcode byte, 3 extra displacement bytes. */
+
+ /* UNCOND_JUMP states. */
+ {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (UNCOND_JUMP, BIG)},
+ {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (UNCOND_JUMP, BIG16)},
+ /* dword jmp adds 4 bytes to frag:
+ 0 extra opcode bytes, 4 displacement bytes. */
{0, 0, 4, 0},
- /* word conditionals add 2 bytes to frag:
- 1 extra opcode byte, 1 extra displacement byte. */
+ /* word jmp adds 2 byte2 to frag:
+ 0 extra opcode bytes, 2 displacement bytes. */
{0, 0, 2, 0},
- {127 + 1, -128 + 1, 0, ENCODE_RELAX_STATE (UNCOND_JUMP, BIG)},
- {127 + 1, -128 + 1, 0, ENCODE_RELAX_STATE (UNCOND_JUMP, BIG16)},
- /* dword jmp adds 3 bytes to frag:
- 0 extra opcode bytes, 3 extra displacement bytes. */
+ /* COND_JUMP states. */
+ {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (COND_JUMP, BIG)},
+ {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (COND_JUMP, BIG16)},
+ /* dword conditionals adds 5 bytes to frag:
+ 1 extra opcode byte, 4 displacement bytes. */
+ {0, 0, 5, 0},
+ /* word conditionals add 3 bytes to frag:
+ 1 extra opcode byte, 2 displacement bytes. */
{0, 0, 3, 0},
- /* word jmp adds 1 byte to frag:
- 0 extra opcode bytes, 1 extra displacement byte. */
- {0, 0, 1, 0}
+ /* COND_JUMP86 states. */
+ {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (COND_JUMP86, BIG)},
+ {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (COND_JUMP86, BIG16)},
+ /* dword conditionals adds 5 bytes to frag:
+ 1 extra opcode byte, 4 displacement bytes. */
+ {0, 0, 5, 0},
+ /* word conditionals add 4 bytes to frag:
+ 1 displacement byte and a 3 byte long branch insn. */
+ {0, 0, 4, 0}
};
static const arch_entry cpu_arch[] = {
{"i686", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuMMX|CpuSSE },
{"pentium", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|CpuMMX },
{"pentiumpro",Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuMMX|CpuSSE },
- {"k6", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|CpuMMX|Cpu3dnow },
- {"athlon", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuMMX|Cpu3dnow },
+ {"pentium4", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuP4|CpuMMX|CpuSSE|CpuSSE2 },
+ {"k6", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|CpuK6|CpuMMX|Cpu3dnow },
+ {"athlon", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuK6|CpuAthlon|CpuMMX|Cpu3dnow },
+ {"sledgehammer",Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuK6|CpuAthlon|CpuSledgehammer|CpuMMX|Cpu3dnow|CpuSSE|CpuSSE2 },
{NULL, 0 }
};
f32_15, f32_15, f32_15, f32_15, f32_15, f32_15, f32_15
};
+ /* ??? We can't use these fillers for x86_64, since they often kills the
+ upper halves. Solve later. */
+ if (flag_code == CODE_64BIT)
+ count = 1;
+
if (count > 0 && count <= 15)
{
- if (flag_16bit_code)
+ if (flag_code == CODE_16BIT)
{
memcpy (fragP->fr_literal + fragP->fr_fix,
f16_patt[count - 1], count);
mode_from_disp_size (t)
unsigned int t;
{
- return (t & Disp8) ? 1 : (t & (Disp16 | Disp32)) ? 2 : 0;
+ return (t & Disp8) ? 1 : (t & (Disp16 | Disp32 | Disp32S)) ? 2 : 0;
}
static INLINE int
{
return (-32768 <= num) && (num <= 32767);
}
+static INLINE int
+fits_in_signed_long (num)
+ offsetT num ATTRIBUTE_UNUSED;
+{
+#ifndef BFD64
+ return 1;
+#else
+ return (!(((offsetT) -1 << 31) & num)
+ || (((offsetT) -1 << 31) & num) == ((offsetT) -1 << 31));
+#endif
+} /* fits_in_signed_long() */
+static INLINE int
+fits_in_unsigned_long (num)
+ offsetT num ATTRIBUTE_UNUSED;
+{
+#ifndef BFD64
+ return 1;
+#else
+ return (num & (((offsetT) 2 << 31) - 1)) == num;
+#endif
+} /* fits_in_unsigned_long() */
static int
smallest_imm_type (num)
offsetT num;
{
- if (cpu_arch_flags != 0
- && cpu_arch_flags != (Cpu086 | Cpu186 | Cpu286 | Cpu386 | Cpu486))
+ if (cpu_arch_flags != (Cpu086 | Cpu186 | Cpu286 | Cpu386 | Cpu486 | CpuNo64)
+ && !(cpu_arch_flags & (CpuUnknown)))
{
/* This code is disabled on the 486 because all the Imm1 forms
in the opcode table are slower on the i486. They're the
displacement, which has another syntax if you really want to
use that form. */
if (num == 1)
- return Imm1 | Imm8 | Imm8S | Imm16 | Imm32;
+ return Imm1 | Imm8 | Imm8S | Imm16 | Imm32 | Imm32S | Imm64;
}
return (fits_in_signed_byte (num)
- ? (Imm8S | Imm8 | Imm16 | Imm32)
+ ? (Imm8S | Imm8 | Imm16 | Imm32 | Imm32S | Imm64)
: fits_in_unsigned_byte (num)
- ? (Imm8 | Imm16 | Imm32)
+ ? (Imm8 | Imm16 | Imm32 | Imm32S | Imm64)
: (fits_in_signed_word (num) || fits_in_unsigned_word (num))
- ? (Imm16 | Imm32)
- : (Imm32));
+ ? (Imm16 | Imm32 | Imm32S | Imm64)
+ : fits_in_signed_long (num)
+ ? (Imm32 | Imm32S | Imm64)
+ : fits_in_unsigned_long (num)
+ ? (Imm32 | Imm64)
+ : Imm64);
}
static offsetT
case 1: mask = ((addressT) 1 << 8) - 1; break;
case 2: mask = ((addressT) 1 << 16) - 1; break;
case 4: mask = ((addressT) 2 << 31) - 1; break;
+#ifdef BFD64
+ case 8: mask = ((addressT) 2 << 63) - 1; break;
+#endif
default: abort ();
}
/* If BFD64, sign extend val. */
- if ((val & ~(((addressT) 2 << 31) - 1)) == 0)
- val = (val ^ ((addressT) 1 << 31)) - ((addressT) 1 << 31);
+ if (!use_rela_relocations)
+ if ((val & ~(((addressT) 2 << 31) - 1)) == 0)
+ val = (val ^ ((addressT) 1 << 31)) - ((addressT) 1 << 31);
if ((val & ~mask) != 0 && (val & ~mask) != ~mask)
{
int ret = 1;
int q;
- switch (prefix)
- {
- default:
- abort ();
-
- case CS_PREFIX_OPCODE:
- case DS_PREFIX_OPCODE:
- case ES_PREFIX_OPCODE:
- case FS_PREFIX_OPCODE:
- case GS_PREFIX_OPCODE:
- case SS_PREFIX_OPCODE:
- q = SEG_PREFIX;
- break;
+ if (prefix >= 0x40 && prefix < 0x50 && flag_code == CODE_64BIT)
+ q = REX_PREFIX;
+ else
+ switch (prefix)
+ {
+ default:
+ abort ();
+
+ case CS_PREFIX_OPCODE:
+ case DS_PREFIX_OPCODE:
+ case ES_PREFIX_OPCODE:
+ case FS_PREFIX_OPCODE:
+ case GS_PREFIX_OPCODE:
+ case SS_PREFIX_OPCODE:
+ q = SEG_PREFIX;
+ break;
- case REPNE_PREFIX_OPCODE:
- case REPE_PREFIX_OPCODE:
- ret = 2;
- /* fall thru */
- case LOCK_PREFIX_OPCODE:
- q = LOCKREP_PREFIX;
- break;
+ case REPNE_PREFIX_OPCODE:
+ case REPE_PREFIX_OPCODE:
+ ret = 2;
+ /* fall thru */
+ case LOCK_PREFIX_OPCODE:
+ q = LOCKREP_PREFIX;
+ break;
- case FWAIT_OPCODE:
- q = WAIT_PREFIX;
- break;
+ case FWAIT_OPCODE:
+ q = WAIT_PREFIX;
+ break;
- case ADDR_PREFIX_OPCODE:
- q = ADDR_PREFIX;
- break;
+ case ADDR_PREFIX_OPCODE:
+ q = ADDR_PREFIX;
+ break;
- case DATA_PREFIX_OPCODE:
- q = DATA_PREFIX;
- break;
- }
+ case DATA_PREFIX_OPCODE:
+ q = DATA_PREFIX;
+ break;
+ }
if (i.prefix[q])
{
}
static void
-set_16bit_code_flag (new_16bit_code_flag)
- int new_16bit_code_flag;
+set_code_flag (value)
+ int value;
{
- flag_16bit_code = new_16bit_code_flag;
+ flag_code = value;
+ cpu_arch_flags &= ~(Cpu64 | CpuNo64);
+ cpu_arch_flags |= (flag_code == CODE_64BIT ? Cpu64 : CpuNo64);
+ if (value == CODE_64BIT && !(cpu_arch_flags & CpuSledgehammer))
+ {
+ as_bad (_("64bit mode not supported on this CPU."));
+ }
+ if (value == CODE_32BIT && !(cpu_arch_flags & Cpu386))
+ {
+ as_bad (_("32bit mode not supported on this CPU."));
+ }
stackop_size = '\0';
}
static void
-set_16bit_gcc_code_flag (new_16bit_code_flag)
- int new_16bit_code_flag;
+set_16bit_gcc_code_flag (new_code_flag)
+ int new_code_flag;
{
- flag_16bit_code = new_16bit_code_flag;
- stackop_size = new_16bit_code_flag ? 'l' : '\0';
+ flag_code = new_code_flag;
+ cpu_arch_flags &= ~(Cpu64 | CpuNo64);
+ cpu_arch_flags |= (flag_code == CODE_64BIT ? Cpu64 : CpuNo64);
+ stackop_size = 'l';
}
static void
if (strcmp (string, cpu_arch[i].name) == 0)
{
cpu_arch_name = cpu_arch[i].name;
- cpu_arch_flags = cpu_arch[i].flags;
+ cpu_arch_flags = (cpu_arch[i].flags
+ | (flag_code == CODE_64BIT ? Cpu64 : CpuNo64));
break;
}
}
else
as_bad (_("missing cpu architecture"));
+ no_cond_jump_promotion = 0;
+ if (*input_line_pointer == ','
+ && ! is_end_of_line[(unsigned char) input_line_pointer[1]])
+ {
+ char *string = ++input_line_pointer;
+ int e = get_symbol_end ();
+
+ if (strcmp (string, "nojumps") == 0)
+ no_cond_jump_promotion = 1;
+ else if (strcmp (string, "jumps") == 0)
+ ;
+ else
+ as_bad (_("no such architecture modifier: `%s'"), string);
+
+ *input_line_pointer = e;
+ }
+
demand_empty_rest_of_line ();
}
{"value", cons, 2},
{"noopt", s_ignore, 0},
{"optim", s_ignore, 0},
- {"code16gcc", set_16bit_gcc_code_flag, 1},
- {"code16", set_16bit_code_flag, 1},
- {"code32", set_16bit_code_flag, 0},
+ {"code16gcc", set_16bit_gcc_code_flag, CODE_16BIT},
+ {"code16", set_code_flag, CODE_16BIT},
+ {"code32", set_code_flag, CODE_32BIT},
+ {"code64", set_code_flag, CODE_64BIT},
{"intel_syntax", set_intel_syntax, 1},
{"att_syntax", set_intel_syntax, 0},
+ {"file", dwarf2_directive_file, 0},
+ {"loc", dwarf2_directive_loc, 0},
{0, 0, 0}
};
/* Hash table for register lookup. */
static struct hash_control *reg_hash;
\f
+#ifdef BFD_ASSEMBLER
+unsigned long
+i386_mach ()
+{
+ if (!strcmp (default_arch, "x86_64"))
+ return bfd_mach_x86_64;
+ else if (!strcmp (default_arch, "i386"))
+ return bfd_mach_i386_i386;
+ else
+ as_fatal (_("Unknown architecture"));
+}
+#endif
+\f
void
md_begin ()
{
(PTR) core_optab);
if (hash_err)
{
- hash_error:
as_fatal (_("Internal Error: Can't hash %s: %s"),
(optab - 1)->name,
hash_err);
{
hash_err = hash_insert (reg_hash, regtab->reg_name, (PTR) regtab);
if (hash_err)
- goto hash_error;
+ as_fatal (_("Internal Error: Can't hash %s: %s"),
+ regtab->reg_name,
+ hash_err);
}
}
char *line;
i386_insn *x;
{
- register template *p;
- int i;
+ unsigned int i;
fprintf (stdout, "%s: template ", line);
pte (&x->tm);
- fprintf (stdout, " modrm: mode %x reg %x reg/mem %x",
+ fprintf (stdout, " address: base %s index %s scale %x\n",
+ x->base_reg ? x->base_reg->reg_name : "none",
+ x->index_reg ? x->index_reg->reg_name : "none",
+ x->log2_scale_factor);
+ fprintf (stdout, " modrm: mode %x reg %x reg/mem %x\n",
x->rm.mode, x->rm.reg, x->rm.regmem);
- fprintf (stdout, " base %x index %x scale %x\n",
- x->bi.base, x->bi.index, x->bi.scale);
+ fprintf (stdout, " sib: base %x index %x scale %x\n",
+ x->sib.base, x->sib.index, x->sib.scale);
+ fprintf (stdout, " rex: 64bit %x extX %x extY %x extZ %x\n",
+ x->rex.mode64, x->rex.extX, x->rex.extY, x->rex.extZ);
for (i = 0; i < x->operands; i++)
{
fprintf (stdout, " #%d: ", i + 1);
pte (t)
template *t;
{
- int i;
+ unsigned int i;
fprintf (stdout, " %d operands ", t->operands);
fprintf (stdout, "opcode %x ", t->base_opcode);
if (t->extension_opcode != None)
{ Reg8, "r8" },
{ Reg16, "r16" },
{ Reg32, "r32" },
+ { Reg64, "r64" },
{ Imm8, "i8" },
{ Imm8S, "i8s" },
{ Imm16, "i16" },
{ Imm32, "i32" },
+ { Imm32S, "i32s" },
+ { Imm64, "i64" },
{ Imm1, "i1" },
{ BaseIndex, "BaseIndex" },
{ Disp8, "d8" },
{ Disp16, "d16" },
{ Disp32, "d32" },
+ { Disp32S, "d32s" },
+ { Disp64, "d64" },
{ InOutPortReg, "InOutPortReg" },
{ ShiftCount, "ShiftCount" },
{ Control, "control reg" },
{
register struct type_name *ty;
- if (t == Unknown)
- {
- fprintf (stdout, _("Unknown"));
- }
- else
- {
- for (ty = type_names; ty->mask; ty++)
- if (t & ty->mask)
- fprintf (stdout, "%s, ", ty->tname);
- }
+ for (ty = type_names; ty->mask; ty++)
+ if (t & ty->mask)
+ fprintf (stdout, "%s, ", ty->tname);
fflush (stdout);
}
}
#ifdef BFD_ASSEMBLER
-static bfd_reloc_code_real_type reloc
- PARAMS ((int, int, bfd_reloc_code_real_type));
static bfd_reloc_code_real_type
-reloc (size, pcrel, other)
+reloc (size, pcrel, sign, other)
int size;
int pcrel;
+ int sign;
bfd_reloc_code_real_type other;
{
if (other != NO_RELOC)
if (pcrel)
{
+ if (!sign)
+ as_bad (_("There are no unsigned pc-relative relocations"));
switch (size)
{
case 1: return BFD_RELOC_8_PCREL;
}
else
{
- switch (size)
- {
- case 1: return BFD_RELOC_8;
- case 2: return BFD_RELOC_16;
- case 4: return BFD_RELOC_32;
- }
- as_bad (_("can not do %d byte relocation"), size);
+ if (sign)
+ switch (size)
+ {
+ case 4: return BFD_RELOC_X86_64_32S;
+ }
+ else
+ switch (size)
+ {
+ case 1: return BFD_RELOC_8;
+ case 2: return BFD_RELOC_16;
+ case 4: return BFD_RELOC_32;
+ case 8: return BFD_RELOC_64;
+ }
+ as_bad (_("can not do %s %d byte relocation"),
+ sign ? "signed" : "unsigned", size);
}
+ abort ();
return BFD_RELOC_NONE;
}
if (fixP->fx_r_type == BFD_RELOC_386_GOTOFF
|| fixP->fx_r_type == BFD_RELOC_386_PLT32
|| fixP->fx_r_type == BFD_RELOC_386_GOT32
+ || fixP->fx_r_type == BFD_RELOC_X86_64_PLT32
+ || fixP->fx_r_type == BFD_RELOC_X86_64_GOT32
+ || fixP->fx_r_type == BFD_RELOC_X86_64_GOTPCREL
|| fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
|| fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
return 0;
return 1;
}
#else
-#define reloc(SIZE,PCREL,OTHER) 0
-#define BFD_RELOC_16 0
-#define BFD_RELOC_32 0
-#define BFD_RELOC_16_PCREL 0
-#define BFD_RELOC_32_PCREL 0
-#define BFD_RELOC_386_PLT32 0
-#define BFD_RELOC_386_GOT32 0
-#define BFD_RELOC_386_GOTOFF 0
+#define reloc(SIZE,PCREL,SIGN,OTHER) 0
+#define BFD_RELOC_16 0
+#define BFD_RELOC_32 0
+#define BFD_RELOC_16_PCREL 0
+#define BFD_RELOC_32_PCREL 0
+#define BFD_RELOC_386_PLT32 0
+#define BFD_RELOC_386_GOT32 0
+#define BFD_RELOC_386_GOTOFF 0
+#define BFD_RELOC_X86_64_PLT32 0
+#define BFD_RELOC_X86_64_GOT32 0
+#define BFD_RELOC_X86_64_GOTPCREL 0
#endif
static int intel_float_operand PARAMS ((char *mnemonic));
/* Points to template once we've found it. */
const template *t;
- /* Count the size of the instruction generated. */
- int insn_size = 0;
-
int j;
char mnemonic[MAX_MNEM_SIZE];
/* Initialize globals. */
memset (&i, '\0', sizeof (i));
for (j = 0; j < MAX_OPERANDS; j++)
- i.disp_reloc[j] = NO_RELOC;
+ i.reloc[j] = NO_RELOC;
memset (disp_expressions, '\0', sizeof (disp_expressions));
memset (im_expressions, '\0', sizeof (im_expressions));
save_stack_p = save_stack;
}
if (!is_space_char (*l)
&& *l != END_OF_INSN
- && *l != PREFIX_SEPARATOR)
+ && *l != PREFIX_SEPARATOR
+ && *l != ',')
{
as_bad (_("invalid character %s in mnemonic"),
output_invalid (*l));
Similarly, in 32-bit mode, do not allow addr32 or data32. */
if ((current_templates->start->opcode_modifier & (Size16 | Size32))
&& (((current_templates->start->opcode_modifier & Size32) != 0)
- ^ flag_16bit_code))
+ ^ (flag_code == CODE_16BIT)))
{
as_bad (_("redundant %s prefix"),
current_templates->start->name);
{
case WORD_MNEM_SUFFIX:
case BYTE_MNEM_SUFFIX:
- case SHORT_MNEM_SUFFIX:
- case LONG_MNEM_SUFFIX:
+ case QWORD_MNEM_SUFFIX:
i.suffix = mnem_p[-1];
mnem_p[-1] = '\0';
current_templates = hash_find (op_hash, mnemonic);
break;
+ case SHORT_MNEM_SUFFIX:
+ case LONG_MNEM_SUFFIX:
+ if (!intel_syntax)
+ {
+ i.suffix = mnem_p[-1];
+ mnem_p[-1] = '\0';
+ current_templates = hash_find (op_hash, mnemonic);
+ }
+ break;
/* Intel Syntax. */
- case DWORD_MNEM_SUFFIX:
+ case 'd':
if (intel_syntax)
{
- i.suffix = mnem_p[-1];
+ if (intel_float_operand (mnemonic))
+ i.suffix = SHORT_MNEM_SUFFIX;
+ else
+ i.suffix = LONG_MNEM_SUFFIX;
mnem_p[-1] = '\0';
current_templates = hash_find (op_hash, mnemonic);
- break;
}
+ break;
}
if (!current_templates)
{
}
}
+ if (current_templates->start->opcode_modifier & (Jump | JumpByte))
+ {
+ /* Check for a branch hint. We allow ",pt" and ",pn" for
+ predict taken and predict not taken respectively.
+ I'm not sure that branch hints actually do anything on loop
+ and jcxz insns (JumpByte) for current Pentium4 chips. They
+ may work in the future and it doesn't hurt to accept them
+ now. */
+ if (l[0] == ',' && l[1] == 'p')
+ {
+ if (l[2] == 't')
+ {
+ if (! add_prefix (DS_PREFIX_OPCODE))
+ return;
+ l += 3;
+ }
+ else if (l[2] == 'n')
+ {
+ if (! add_prefix (CS_PREFIX_OPCODE))
+ return;
+ l += 3;
+ }
+ }
+ }
+ /* Any other comma loses. */
+ if (*l == ',')
+ {
+ as_bad (_("invalid character %s in mnemonic"),
+ output_invalid (*l));
+ return;
+ }
+
/* Check if instruction is supported on specified architecture. */
if (cpu_arch_flags != 0)
{
- if (current_templates->start->cpu_flags & ~cpu_arch_flags)
+ if ((current_templates->start->cpu_flags & ~(Cpu64 | CpuNo64))
+ & ~(cpu_arch_flags & ~(Cpu64 | CpuNo64)))
{
as_warn (_("`%s' is not supported on `%s'"),
current_templates->start->name, cpu_arch_name);
}
- else if ((Cpu386 & ~cpu_arch_flags) && !flag_16bit_code)
+ else if ((Cpu386 & ~cpu_arch_flags) && (flag_code != CODE_16BIT))
{
as_warn (_("use .code16 to ensure correct addressing mode"));
}
{
union i386_op temp_op;
unsigned int temp_type;
+ RELOC_ENUM temp_reloc;
int xchg1 = 0;
int xchg2 = 0;
temp_op = i.op[xchg2];
i.op[xchg2] = i.op[xchg1];
i.op[xchg1] = temp_op;
+ temp_reloc = i.reloc[xchg2];
+ i.reloc[xchg2] = i.reloc[xchg1];
+ i.reloc[xchg1] = temp_reloc;
if (i.mem_operands == 2)
{
guess_suffix = BYTE_MNEM_SUFFIX;
else if (i.types[op] & Reg16)
guess_suffix = WORD_MNEM_SUFFIX;
+ else if (i.types[op] & Reg32)
+ guess_suffix = LONG_MNEM_SUFFIX;
+ else if (i.types[op] & Reg64)
+ guess_suffix = QWORD_MNEM_SUFFIX;
break;
}
}
- else if (flag_16bit_code ^ (i.prefix[DATA_PREFIX] != 0))
+ else if ((flag_code == CODE_16BIT) ^ (i.prefix[DATA_PREFIX] != 0))
guess_suffix = WORD_MNEM_SUFFIX;
for (op = i.operands; --op >= 0;)
- if ((i.types[op] & Imm)
- && i.op[op].imms->X_op == O_constant)
+ if (i.types[op] & Imm)
{
- /* If a suffix is given, this operand may be shortened. */
- switch (guess_suffix)
+ switch (i.op[op].imms->X_op)
{
- case WORD_MNEM_SUFFIX:
- i.types[op] |= Imm16;
- break;
- case BYTE_MNEM_SUFFIX:
- i.types[op] |= Imm16 | Imm8 | Imm8S;
- break;
- }
+ case O_constant:
+ /* If a suffix is given, this operand may be shortened. */
+ switch (guess_suffix)
+ {
+ case LONG_MNEM_SUFFIX:
+ i.types[op] |= Imm32 | Imm64;
+ break;
+ case WORD_MNEM_SUFFIX:
+ i.types[op] |= Imm16 | Imm32S | Imm32 | Imm64;
+ break;
+ case BYTE_MNEM_SUFFIX:
+ i.types[op] |= Imm16 | Imm8 | Imm8S | Imm32S | Imm32 | Imm64;
+ break;
+ }
- /* If this operand is at most 16 bits, convert it to a
- signed 16 bit number before trying to see whether it will
- fit in an even smaller size. This allows a 16-bit operand
- such as $0xffe0 to be recognised as within Imm8S range. */
- if ((i.types[op] & Imm16)
- && (i.op[op].imms->X_add_number & ~(offsetT)0xffff) == 0)
- {
- i.op[op].imms->X_add_number =
- (((i.op[op].imms->X_add_number & 0xffff) ^ 0x8000) - 0x8000);
+ /* If this operand is at most 16 bits, convert it
+ to a signed 16 bit number before trying to see
+ whether it will fit in an even smaller size.
+ This allows a 16-bit operand such as $0xffe0 to
+ be recognised as within Imm8S range. */
+ if ((i.types[op] & Imm16)
+ && (i.op[op].imms->X_add_number & ~(offsetT) 0xffff) == 0)
+ {
+ i.op[op].imms->X_add_number =
+ (((i.op[op].imms->X_add_number & 0xffff) ^ 0x8000) - 0x8000);
+ }
+ if ((i.types[op] & Imm32)
+ && (i.op[op].imms->X_add_number & ~(((offsetT) 2 << 31) - 1)) == 0)
+ {
+ i.op[op].imms->X_add_number =
+ (i.op[op].imms->X_add_number ^ ((offsetT) 1 << 31)) - ((addressT) 1 << 31);
+ }
+ i.types[op] |= smallest_imm_type (i.op[op].imms->X_add_number);
+ /* We must avoid matching of Imm32 templates when 64bit only immediate is available. */
+ if (guess_suffix == QWORD_MNEM_SUFFIX)
+ i.types[op] &= ~Imm32;
+ break;
+ case O_absent:
+ case O_register:
+ abort ();
+ /* Symbols and expressions. */
+ default:
+ /* Convert symbolic operand to proper sizes for matching. */
+ switch (guess_suffix)
+ {
+ case QWORD_MNEM_SUFFIX:
+ i.types[op] = Imm64 | Imm32S;
+ break;
+ case LONG_MNEM_SUFFIX:
+ i.types[op] = Imm32 | Imm64;
+ break;
+ case WORD_MNEM_SUFFIX:
+ i.types[op] = Imm16 | Imm32 | Imm64;
+ break;
+ break;
+ case BYTE_MNEM_SUFFIX:
+ i.types[op] = Imm8 | Imm8S | Imm16 | Imm32S | Imm32;
+ break;
+ break;
+ }
+ break;
}
- i.types[op] |= smallest_imm_type ((long) i.op[op].imms->X_add_number);
}
}
for (op = i.operands; --op >= 0;)
if ((i.types[op] & Disp)
- && i.op[op].imms->X_op == O_constant)
+ && i.op[op].disps->X_op == O_constant)
{
offsetT disp = i.op[op].disps->X_add_number;
disp = (((disp & 0xffff) ^ 0x8000) - 0x8000);
}
- if (fits_in_signed_byte (disp))
+ else if (i.types[op] & Disp32)
+ {
+ /* We know this operand is at most 32 bits, so convert to a
+ signed 32 bit number before trying to see whether it will
+ fit in an even smaller size. */
+ disp &= (((offsetT) 2 << 31) - 1);
+ disp = (disp ^ ((offsetT) 1 << 31)) - ((addressT) 1 << 31);
+ }
+ if (flag_code == CODE_64BIT)
+ {
+ if (fits_in_signed_long (disp))
+ i.types[op] |= Disp32S;
+ if (fits_in_unsigned_long (disp))
+ i.types[op] |= Disp32;
+ }
+ if ((i.types[op] & (Disp32 | Disp32S | Disp16))
+ && fits_in_signed_byte (disp))
i.types[op] |= Disp8;
}
}
? No_sSuf
: (i.suffix == LONG_MNEM_SUFFIX
? No_lSuf
- : (i.suffix == DWORD_MNEM_SUFFIX
- ? No_dSuf
+ : (i.suffix == QWORD_MNEM_SUFFIX
+ ? No_qSuf
: (i.suffix == LONG_DOUBLE_MNEM_SUFFIX ? No_xSuf : 0))))));
for (t = current_templates->start;
|| t->extension_opcode == 7))) /* 0xd9,7 "f{n}stcw" */
continue;
+ /* Do not verify operands when there are none. */
else if (!t->operands)
- /* 0 operands always matches. */
- break;
+ {
+ if (t->cpu_flags & ~cpu_arch_flags)
+ continue;
+ /* We've found a match; break out of loop. */
+ break;
+ }
overlap0 = i.types[0] & t->operand_types[0];
switch (t->operands)
/* found_reverse_match holds which of D or FloatDR
we've found. */
found_reverse_match = t->opcode_modifier & (D|FloatDR);
- break;
}
/* Found a forward 2 operand match here. */
- if (t->operands == 3)
+ else if (t->operands == 3)
{
/* Here we make use of the fact that there are no
reverse match 3 operand instructions, and all 3
/* Found either forward/reverse 2 or 3 operand match here:
slip through to break. */
}
+ if (t->cpu_flags & ~cpu_arch_flags)
+ {
+ found_reverse_match = 0;
+ continue;
+ }
/* We've found a match; break out of loop. */
break;
}
}
/* Undo SYSV386_COMPAT brokenness when in Intel mode. See i386.h */
- if (SYSV386_COMPAT
- && intel_syntax
- && (i.tm.base_opcode & 0xfffffde0) == 0xdce0)
- i.tm.base_opcode ^= FloatR;
+ if (SYSV386_COMPAT
+ && intel_syntax
+ && (i.tm.base_opcode & 0xfffffde0) == 0xdce0)
+ i.tm.base_opcode ^= FloatR;
if (i.tm.opcode_modifier & FWait)
if (! add_prefix (FWAIT_OPCODE))
}
}
+ if (i.reg_operands && flag_code < CODE_64BIT)
+ {
+ int op;
+ for (op = i.operands; --op >= 0;)
+ if ((i.types[op] & Reg)
+ && (i.op[op].regs->reg_flags & (RegRex64|RegRex)))
+ {
+ as_bad (_("Extended register `%%%s' available only in 64bit mode."),
+ i.op[op].regs->reg_name);
+ return;
+ }
+ }
+
/* If matched instruction specifies an explicit instruction mnemonic
suffix, use it. */
- if (i.tm.opcode_modifier & (Size16 | Size32))
+ if (i.tm.opcode_modifier & (Size16 | Size32 | Size64))
{
if (i.tm.opcode_modifier & Size16)
i.suffix = WORD_MNEM_SUFFIX;
+ else if (i.tm.opcode_modifier & Size64)
+ i.suffix = QWORD_MNEM_SUFFIX;
else
i.suffix = LONG_MNEM_SUFFIX;
}
{
i.suffix = ((i.types[op] & Reg8) ? BYTE_MNEM_SUFFIX :
(i.types[op] & Reg16) ? WORD_MNEM_SUFFIX :
+ (i.types[op] & Reg64) ? QWORD_MNEM_SUFFIX :
LONG_MNEM_SUFFIX);
break;
}
if (intel_syntax
&& (i.tm.base_opcode == 0xfb7
|| i.tm.base_opcode == 0xfb6
+ || i.tm.base_opcode == 0x63
|| i.tm.base_opcode == 0xfbe
|| i.tm.base_opcode == 0xfbf))
continue;
#endif
)
{
+ /* Prohibit these changes in the 64bit mode, since
+ the lowering is more complicated. */
+ if (flag_code == CODE_64BIT
+ && (i.tm.operand_types[op] & InOutPortReg) == 0)
+ as_bad (_("Incorrect register `%%%s' used with`%c' suffix"),
+ i.op[op].regs->reg_name,
+ i.suffix);
#if REGISTER_WARNINGS
if (!quiet_warnings
&& (i.tm.operand_types[op] & InOutPortReg) == 0)
as_warn (_("using `%%%s' instead of `%%%s' due to `%c' suffix"),
- (i.op[op].regs - (i.types[op] & Reg16 ? 8 : 16))->reg_name,
+ (i.op[op].regs
+ + (i.types[op] & Reg16
+ ? REGNAM_AL - REGNAM_AX
+ : REGNAM_AL - REGNAM_EAX))->reg_name,
i.op[op].regs->reg_name,
i.suffix);
#endif
i.suffix);
return;
}
-#if REGISTER_WARNINGS
/* Warn if the e prefix on a general reg is missing. */
- else if (!quiet_warnings
+ else if ((!quiet_warnings || flag_code == CODE_64BIT)
&& (i.types[op] & Reg16) != 0
&& (i.tm.operand_types[op] & (Reg32|Acc)) != 0)
{
- as_warn (_("using `%%%s' instead of `%%%s' due to `%c' suffix"),
- (i.op[op].regs + 8)->reg_name,
- i.op[op].regs->reg_name,
- i.suffix);
- }
+ /* Prohibit these changes in the 64bit mode, since
+ the lowering is more complicated. */
+ if (flag_code == CODE_64BIT)
+ as_bad (_("Incorrect register `%%%s' used with`%c' suffix"),
+ i.op[op].regs->reg_name,
+ i.suffix);
+#if REGISTER_WARNINGS
+ else
+ as_warn (_("using `%%%s' instead of `%%%s' due to `%c' suffix"),
+ (i.op[op].regs + REGNAM_EAX - REGNAM_AX)->reg_name,
+ i.op[op].regs->reg_name,
+ i.suffix);
#endif
+ }
+ /* Warn if the r prefix on a general reg is missing. */
+ else if ((i.types[op] & Reg64) != 0
+ && (i.tm.operand_types[op] & (Reg32|Acc)) != 0)
+ {
+ as_bad (_("Incorrect register `%%%s' used with`%c' suffix"),
+ i.op[op].regs->reg_name,
+ i.suffix);
+ }
+ }
+ else if (i.suffix == QWORD_MNEM_SUFFIX)
+ {
+ int op;
+
+ for (op = i.operands; --op >= 0; )
+ /* Reject eight bit registers, except where the template
+ requires them. (eg. movzb) */
+ if ((i.types[op] & Reg8) != 0
+ && (i.tm.operand_types[op] & (Reg16|Reg32|Acc)) != 0)
+ {
+ as_bad (_("`%%%s' not allowed with `%s%c'"),
+ i.op[op].regs->reg_name,
+ i.tm.name,
+ i.suffix);
+ return;
+ }
+ /* Warn if the e prefix on a general reg is missing. */
+ else if (((i.types[op] & Reg16) != 0
+ || (i.types[op] & Reg32) != 0)
+ && (i.tm.operand_types[op] & (Reg32|Acc)) != 0)
+ {
+ /* Prohibit these changes in the 64bit mode, since
+ the lowering is more complicated. */
+ as_bad (_("Incorrect register `%%%s' used with`%c' suffix"),
+ i.op[op].regs->reg_name,
+ i.suffix);
+ }
}
else if (i.suffix == WORD_MNEM_SUFFIX)
{
i.suffix);
return;
}
-#if REGISTER_WARNINGS
/* Warn if the e prefix on a general reg is present. */
- else if (!quiet_warnings
+ else if ((!quiet_warnings || flag_code == CODE_64BIT)
&& (i.types[op] & Reg32) != 0
&& (i.tm.operand_types[op] & (Reg16|Acc)) != 0)
{
- as_warn (_("using `%%%s' instead of `%%%s' due to `%c' suffix"),
- (i.op[op].regs - 8)->reg_name,
- i.op[op].regs->reg_name,
- i.suffix);
- }
+ /* Prohibit these changes in the 64bit mode, since
+ the lowering is more complicated. */
+ if (flag_code == CODE_64BIT)
+ as_bad (_("Incorrect register `%%%s' used with`%c' suffix"),
+ i.op[op].regs->reg_name,
+ i.suffix);
+ else
+#if REGISTER_WARNINGS
+ as_warn (_("using `%%%s' instead of `%%%s' due to `%c' suffix"),
+ (i.op[op].regs + REGNAM_AX - REGNAM_EAX)->reg_name,
+ i.op[op].regs->reg_name,
+ i.suffix);
#endif
+ }
}
else if (intel_syntax && (i.tm.opcode_modifier & IgnoreSize))
/* Do nothing if the instruction is going to ignore the prefix. */
{
i.suffix = stackop_size;
}
-
/* Make still unresolved immediate matches conform to size of immediate
given in i.suffix. Note: overlap2 cannot be an immediate! */
- if ((overlap0 & (Imm8 | Imm8S | Imm16 | Imm32))
+ if ((overlap0 & (Imm8 | Imm8S | Imm16 | Imm32 | Imm32S))
&& overlap0 != Imm8 && overlap0 != Imm8S
- && overlap0 != Imm16 && overlap0 != Imm32)
+ && overlap0 != Imm16 && overlap0 != Imm32S
+ && overlap0 != Imm32 && overlap0 != Imm64)
{
if (i.suffix)
{
overlap0 &= (i.suffix == BYTE_MNEM_SUFFIX ? (Imm8 | Imm8S) :
- (i.suffix == WORD_MNEM_SUFFIX ? Imm16 : Imm32));
+ (i.suffix == WORD_MNEM_SUFFIX ? Imm16 :
+ (i.suffix == QWORD_MNEM_SUFFIX ? Imm64 | Imm32S : Imm32)));
}
- else if (overlap0 == (Imm16 | Imm32))
+ else if (overlap0 == (Imm16 | Imm32S | Imm32)
+ || overlap0 == (Imm16 | Imm32)
+ || overlap0 == (Imm16 | Imm32S))
{
overlap0 =
- (flag_16bit_code ^ (i.prefix[DATA_PREFIX] != 0)) ? Imm16 : Imm32;
+ ((flag_code == CODE_16BIT) ^ (i.prefix[DATA_PREFIX] != 0)) ? Imm16 : Imm32S;
}
- else
+ if (overlap0 != Imm8 && overlap0 != Imm8S
+ && overlap0 != Imm16 && overlap0 != Imm32S
+ && overlap0 != Imm32 && overlap0 != Imm64)
{
as_bad (_("no instruction mnemonic suffix given; can't determine immediate size"));
return;
}
}
- if ((overlap1 & (Imm8 | Imm8S | Imm16 | Imm32))
+ if ((overlap1 & (Imm8 | Imm8S | Imm16 | Imm32S | Imm32))
&& overlap1 != Imm8 && overlap1 != Imm8S
- && overlap1 != Imm16 && overlap1 != Imm32)
+ && overlap1 != Imm16 && overlap1 != Imm32S
+ && overlap1 != Imm32 && overlap1 != Imm64)
{
if (i.suffix)
{
overlap1 &= (i.suffix == BYTE_MNEM_SUFFIX ? (Imm8 | Imm8S) :
- (i.suffix == WORD_MNEM_SUFFIX ? Imm16 : Imm32));
+ (i.suffix == WORD_MNEM_SUFFIX ? Imm16 :
+ (i.suffix == QWORD_MNEM_SUFFIX ? Imm64 | Imm32S : Imm32)));
}
- else if (overlap1 == (Imm16 | Imm32))
+ else if (overlap1 == (Imm16 | Imm32 | Imm32S)
+ || overlap1 == (Imm16 | Imm32)
+ || overlap1 == (Imm16 | Imm32S))
{
overlap1 =
- (flag_16bit_code ^ (i.prefix[DATA_PREFIX] != 0)) ? Imm16 : Imm32;
+ ((flag_code == CODE_16BIT) ^ (i.prefix[DATA_PREFIX] != 0)) ? Imm16 : Imm32S;
}
- else
+ if (overlap1 != Imm8 && overlap1 != Imm8S
+ && overlap1 != Imm16 && overlap1 != Imm32S
+ && overlap1 != Imm32 && overlap1 != Imm64)
{
- as_bad (_("no instruction mnemonic suffix given; can't determine immediate size"));
+ as_bad (_("no instruction mnemonic suffix given; can't determine immediate size %x %c"),overlap1, i.suffix);
return;
}
}
/* Now select between word & dword operations via the operand
size prefix, except for instructions that will ignore this
prefix anyway. */
- if (((intel_syntax && (i.suffix == DWORD_MNEM_SUFFIX))
- || i.suffix == LONG_MNEM_SUFFIX) == flag_16bit_code
+ if (i.suffix != QWORD_MNEM_SUFFIX
+ && (i.suffix == LONG_MNEM_SUFFIX) == (flag_code == CODE_16BIT)
&& !(i.tm.opcode_modifier & IgnoreSize))
{
unsigned int prefix = DATA_PREFIX_OPCODE;
if (! add_prefix (prefix))
return;
}
+
+ /* Set mode64 for an operand. */
+ if (i.suffix == QWORD_MNEM_SUFFIX
+ && !(i.tm.opcode_modifier & NoRex64))
+ {
+ i.rex.mode64 = 1;
+ if (flag_code < CODE_64BIT)
+ {
+ as_bad (_("64bit operations available only in 64bit modes."));
+ return;
+ }
+ }
+
/* Size floating point instruction. */
- if (i.suffix == LONG_MNEM_SUFFIX
- || (intel_syntax && i.suffix == DWORD_MNEM_SUFFIX))
+ if (i.suffix == LONG_MNEM_SUFFIX)
{
if (i.tm.opcode_modifier & FloatMF)
i.tm.base_opcode ^= 4;
unsigned int op = (i.types[0] & (Reg | FloatReg)) ? 0 : 1;
/* Register goes in low 3 bits of opcode. */
i.tm.base_opcode |= i.op[op].regs->reg_num;
+ if (i.op[op].regs->reg_flags & RegRex)
+ i.rex.extZ = 1;
if (!quiet_warnings && (i.tm.opcode_modifier & Ugh) != 0)
{
/* Warn about some common errors, but press on regardless.
{
i.rm.reg = i.op[dest].regs->reg_num;
i.rm.regmem = i.op[source].regs->reg_num;
+ if (i.op[dest].regs->reg_flags & RegRex)
+ i.rex.extX = 1;
+ if (i.op[source].regs->reg_flags & RegRex)
+ i.rex.extZ = 1;
}
else
{
i.rm.reg = i.op[source].regs->reg_num;
i.rm.regmem = i.op[dest].regs->reg_num;
+ if (i.op[dest].regs->reg_flags & RegRex)
+ i.rex.extZ = 1;
+ if (i.op[source].regs->reg_flags & RegRex)
+ i.rex.extX = 1;
}
}
else
if (! i.index_reg)
{
/* Operand is just <disp> */
- if (flag_16bit_code ^ (i.prefix[ADDR_PREFIX] != 0))
+ if ((flag_code == CODE_16BIT) ^ (i.prefix[ADDR_PREFIX] != 0))
{
i.rm.regmem = NO_BASE_REGISTER_16;
i.types[op] &= ~Disp;
i.types[op] |= Disp16;
}
- else
+ else if (flag_code != CODE_64BIT)
{
i.rm.regmem = NO_BASE_REGISTER;
i.types[op] &= ~Disp;
i.types[op] |= Disp32;
}
+ else
+ {
+ /* 64bit mode overwrites the 32bit
+ absolute addressing by RIP relative
+ addressing and absolute addressing
+ is encoded by one of the redundant
+ SIB forms. */
+
+ i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING;
+ i.sib.base = NO_BASE_REGISTER;
+ i.sib.index = NO_INDEX_REGISTER;
+ i.types[op] &= ~Disp;
+ i.types[op] |= Disp32S;
+ }
}
else /* ! i.base_reg && i.index_reg */
{
i.sib.scale = i.log2_scale_factor;
i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING;
i.types[op] &= ~Disp;
- i.types[op] |= Disp32; /* Must be 32 bit. */
+ if (flag_code != CODE_64BIT)
+ i.types[op] |= Disp32; /* Must be 32 bit */
+ else
+ i.types[op] |= Disp32S;
+ if (i.index_reg->reg_flags & RegRex)
+ i.rex.extY = 1;
}
}
+ /* RIP addressing for 64bit mode. */
+ else if (i.base_reg->reg_type == BaseIndex)
+ {
+ i.rm.regmem = NO_BASE_REGISTER;
+ i.types[op] &= ~Disp;
+ i.types[op] |= Disp32S;
+ i.flags[op] = Operand_PCrel;
+ }
else if (i.base_reg->reg_type & Reg16)
{
switch (i.base_reg->reg_num)
}
i.rm.mode = mode_from_disp_size (i.types[op]);
}
- else /* i.base_reg and 32 bit mode */
+ else /* i.base_reg and 32/64 bit mode */
{
+ if (flag_code == CODE_64BIT
+ && (i.types[op] & Disp))
+ {
+ if (i.types[op] & Disp8)
+ i.types[op] = Disp8 | Disp32S;
+ else
+ i.types[op] = Disp32S;
+ }
i.rm.regmem = i.base_reg->reg_num;
+ if (i.base_reg->reg_flags & RegRex)
+ i.rex.extZ = 1;
i.sib.base = i.base_reg->reg_num;
- if (i.base_reg->reg_num == EBP_REG_NUM)
+ /* x86-64 ignores REX prefix bit here to avoid
+ decoder complications. */
+ if ((i.base_reg->reg_num & 7) == EBP_REG_NUM)
{
default_seg = &ss;
if (i.disp_operands == 0)
{
i.sib.index = i.index_reg->reg_num;
i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING;
+ if (i.index_reg->reg_flags & RegRex)
+ i.rex.extY = 1;
}
i.rm.mode = mode_from_disp_size (i.types[op]);
}
/* If there is an extension opcode to put here, the
register number must be put into the regmem field. */
if (i.tm.extension_opcode != None)
- i.rm.regmem = i.op[op].regs->reg_num;
+ {
+ i.rm.regmem = i.op[op].regs->reg_num;
+ if (i.op[op].regs->reg_flags & RegRex)
+ i.rex.extZ = 1;
+ }
else
- i.rm.reg = i.op[op].regs->reg_num;
+ {
+ i.rm.reg = i.op[op].regs->reg_num;
+ if (i.op[op].regs->reg_flags & RegRex)
+ i.rex.extX = 1;
+ }
/* Now, if no memory operand has set i.rm.mode = 0, 1, 2
we must set it to 3 to indicate this is a register
return;
}
i.tm.base_opcode |= (i.op[0].regs->reg_num << 3);
+ if (i.op[0].regs->reg_flags & RegRex)
+ i.rex.extZ = 1;
}
else if ((i.tm.base_opcode & ~(D|W)) == MOV_AX_DISP32)
{
i.op[0].disps->X_op = O_symbol;
}
+ if (i.tm.opcode_modifier & Rex64)
+ i.rex.mode64 = 1;
+
+ /* For 8bit registers we would need an empty rex prefix.
+ Also in the case instruction is already having prefix,
+ we need to convert old registers to new ones. */
+
+ if (((i.types[0] & Reg8) && (i.op[0].regs->reg_flags & RegRex64))
+ || ((i.types[1] & Reg8) && (i.op[1].regs->reg_flags & RegRex64))
+ || ((i.rex.mode64 || i.rex.extX || i.rex.extY || i.rex.extZ || i.rex.empty)
+ && ((i.types[0] & Reg8) || (i.types[1] & Reg8))))
+ {
+ int x;
+ i.rex.empty = 1;
+ for (x = 0; x < 2; x++)
+ {
+ /* Look for 8bit operand that does use old registers. */
+ if (i.types[x] & Reg8
+ && !(i.op[x].regs->reg_flags & RegRex64))
+ {
+ /* In case it is "hi" register, give up. */
+ if (i.op[x].regs->reg_num > 3)
+ as_bad (_("Can't encode registers '%%%s' in the instruction requiring REX prefix.\n"),
+ i.op[x].regs->reg_name);
+
+ /* Otherwise it is equivalent to the extended register.
+ Since the encoding don't change this is merely cosmetical
+ cleanup for debug output. */
+
+ i.op[x].regs = i.op[x].regs + 8;
+ }
+ }
+ }
+
+ if (i.rex.mode64 || i.rex.extX || i.rex.extY || i.rex.extZ || i.rex.empty)
+ add_prefix (0x40
+ | (i.rex.mode64 ? 8 : 0)
+ | (i.rex.extX ? 4 : 0)
+ | (i.rex.extY ? 2 : 0)
+ | (i.rex.extZ ? 1 : 0));
+
/* We are ready to output the insn. */
{
register char *p;
+ /* Tie dwarf2 debug info to the address at the start of the insn.
+ We can't do this after the insn has been output as the current
+ frag may have been closed off. eg. by frag_var. */
+ dwarf2_emit_insn (0);
+
/* Output jumps. */
if (i.tm.opcode_modifier & Jump)
{
- int size;
int code16;
int prefix;
code16 = 0;
- if (flag_16bit_code)
+ if (flag_code == CODE_16BIT)
code16 = CODE16;
prefix = 0;
i.prefixes -= 1;
code16 ^= CODE16;
}
-
- size = 4;
- if (code16)
- size = 2;
+ /* Pentium4 branch hints. */
+ if (i.prefix[SEG_PREFIX] == CS_PREFIX_OPCODE /* not taken */
+ || i.prefix[SEG_PREFIX] == DS_PREFIX_OPCODE /* taken */)
+ {
+ prefix++;
+ i.prefixes--;
+ }
+ if (i.prefix[REX_PREFIX])
+ {
+ prefix++;
+ i.prefixes--;
+ }
if (i.prefixes != 0 && !intel_syntax)
as_warn (_("skipping prefixes on this instruction"));
instruction we may generate in md_convert_frag. This is 2
bytes for the opcode and room for the prefix and largest
displacement. */
- frag_grow (prefix + 2 + size);
- insn_size += prefix + 1;
+ frag_grow (prefix + 2 + 4);
/* Prefix and 1 opcode byte go in fr_fix. */
p = frag_more (prefix + 1);
- if (prefix)
+ if (i.prefix[DATA_PREFIX])
*p++ = DATA_PREFIX_OPCODE;
+ if (i.prefix[SEG_PREFIX] == CS_PREFIX_OPCODE
+ || i.prefix[SEG_PREFIX] == DS_PREFIX_OPCODE)
+ *p++ = i.prefix[SEG_PREFIX];
+ if (i.prefix[REX_PREFIX])
+ *p++ = i.prefix[REX_PREFIX];
*p = i.tm.base_opcode;
/* 1 possible extra opcode + displacement go in var part.
Pass reloc in fr_var. */
frag_var (rs_machine_dependent,
- 1 + size,
- i.disp_reloc[0],
+ 1 + 4,
+ i.reloc[0],
((unsigned char) *p == JUMP_PC_RELATIVE
? ENCODE_RELAX_STATE (UNCOND_JUMP, SMALL) | code16
- : ENCODE_RELAX_STATE (COND_JUMP, SMALL) | code16),
+ : ((cpu_arch_flags & Cpu386) != 0
+ ? ENCODE_RELAX_STATE (COND_JUMP, SMALL) | code16
+ : ENCODE_RELAX_STATE (COND_JUMP86, SMALL) | code16)),
i.op[0].disps->X_add_symbol,
i.op[0].disps->X_add_number,
p);
size = 1;
if (i.prefix[ADDR_PREFIX])
{
- insn_size += 1;
FRAG_APPEND_1_CHAR (ADDR_PREFIX_OPCODE);
i.prefixes -= 1;
}
+ /* Pentium4 branch hints. */
+ if (i.prefix[SEG_PREFIX] == CS_PREFIX_OPCODE /* not taken */
+ || i.prefix[SEG_PREFIX] == DS_PREFIX_OPCODE /* taken */)
+ {
+ FRAG_APPEND_1_CHAR (i.prefix[SEG_PREFIX]);
+ i.prefixes--;
+ }
}
else
{
int code16;
code16 = 0;
- if (flag_16bit_code)
+ if (flag_code == CODE_16BIT)
code16 = CODE16;
if (i.prefix[DATA_PREFIX])
{
- insn_size += 1;
FRAG_APPEND_1_CHAR (DATA_PREFIX_OPCODE);
i.prefixes -= 1;
code16 ^= CODE16;
size = 2;
}
+ if (i.prefix[REX_PREFIX])
+ {
+ FRAG_APPEND_1_CHAR (i.prefix[REX_PREFIX]);
+ i.prefixes -= 1;
+ }
+
if (i.prefixes != 0 && !intel_syntax)
as_warn (_("skipping prefixes on this instruction"));
- if (fits_in_unsigned_byte (i.tm.base_opcode))
- {
- insn_size += 1 + size;
- p = frag_more (1 + size);
- }
- else
- {
- /* Opcode can be at most two bytes. */
- insn_size += 2 + size;
- p = frag_more (2 + size);
- *p++ = (i.tm.base_opcode >> 8) & 0xff;
- }
- *p++ = i.tm.base_opcode & 0xff;
+ p = frag_more (1 + size);
+ *p++ = i.tm.base_opcode;
fix_new_exp (frag_now, p - frag_now->fr_literal, size,
- i.op[0].disps, 1, reloc (size, 1, i.disp_reloc[0]));
+ i.op[0].disps, 1, reloc (size, 1, 1, i.reloc[0]));
}
else if (i.tm.opcode_modifier & JumpInterSegment)
{
int code16;
code16 = 0;
- if (flag_16bit_code)
+ if (flag_code == CODE_16BIT)
code16 = CODE16;
prefix = 0;
i.prefixes -= 1;
code16 ^= CODE16;
}
+ if (i.prefix[REX_PREFIX])
+ {
+ prefix++;
+ i.prefixes -= 1;
+ }
size = 4;
if (code16)
as_warn (_("skipping prefixes on this instruction"));
/* 1 opcode; 2 segment; offset */
- insn_size += prefix + 1 + 2 + size;
p = frag_more (prefix + 1 + 2 + size);
- if (prefix)
+
+ if (i.prefix[DATA_PREFIX])
*p++ = DATA_PREFIX_OPCODE;
+
+ if (i.prefix[REX_PREFIX])
+ *p++ = i.prefix[REX_PREFIX];
+
*p++ = i.tm.base_opcode;
if (i.op[1].imms->X_op == O_constant)
{
}
else
fix_new_exp (frag_now, p - frag_now->fr_literal, size,
- i.op[1].imms, 0, reloc (size, 0, i.disp_reloc[0]));
+ i.op[1].imms, 0, reloc (size, 0, 0, i.reloc[1]));
if (i.op[0].imms->X_op != O_constant)
as_bad (_("can't handle non absolute segment in `%s'"),
i.tm.name);
/* Output normal instructions here. */
unsigned char *q;
+ /* All opcodes on i386 have eighter 1 or 2 bytes. We may use third
+ byte for the SSE instructions to specify prefix they require. */
+ if (i.tm.base_opcode & 0xff0000)
+ add_prefix ((i.tm.base_opcode >> 16) & 0xff);
+
/* The prefix bytes. */
for (q = i.prefix;
q < i.prefix + sizeof (i.prefix) / sizeof (i.prefix[0]);
{
if (*q)
{
- insn_size += 1;
p = frag_more (1);
md_number_to_chars (p, (valueT) *q, 1);
}
/* Now the opcode; be careful about word order here! */
if (fits_in_unsigned_byte (i.tm.base_opcode))
{
- insn_size += 1;
FRAG_APPEND_1_CHAR (i.tm.base_opcode);
}
- else if (fits_in_unsigned_word (i.tm.base_opcode))
+ else
{
- insn_size += 2;
p = frag_more (2);
/* Put out high byte first: can't use md_number_to_chars! */
*p++ = (i.tm.base_opcode >> 8) & 0xff;
*p = i.tm.base_opcode & 0xff;
}
- else
- { /* Opcode is either 3 or 4 bytes. */
- if (i.tm.base_opcode & 0xff000000)
- {
- insn_size += 4;
- p = frag_more (4);
- *p++ = (i.tm.base_opcode >> 24) & 0xff;
- }
- else
- {
- insn_size += 3;
- p = frag_more (3);
- }
- *p++ = (i.tm.base_opcode >> 16) & 0xff;
- *p++ = (i.tm.base_opcode >> 8) & 0xff;
- *p = (i.tm.base_opcode) & 0xff;
- }
/* Now the modrm byte and sib byte (if present). */
if (i.tm.opcode_modifier & Modrm)
{
- insn_size += 1;
p = frag_more (1);
md_number_to_chars (p,
(valueT) (i.rm.regmem << 0
&& i.rm.mode != 3
&& !(i.base_reg && (i.base_reg->reg_type & Reg16) != 0))
{
- insn_size += 1;
p = frag_more (1);
md_number_to_chars (p,
(valueT) (i.sib.base << 0
offsetT val;
size = 4;
- if (i.types[n] & (Disp8 | Disp16))
+ if (i.types[n] & (Disp8 | Disp16 | Disp64))
{
size = 2;
if (i.types[n] & Disp8)
size = 1;
+ if (i.types[n] & Disp64)
+ size = 8;
}
val = offset_in_range (i.op[n].disps->X_add_number,
size);
- insn_size += size;
p = frag_more (size);
md_number_to_chars (p, val, size);
}
else
{
int size = 4;
+ int sign = 0;
+ int pcrel = (i.flags[n] & Operand_PCrel) != 0;
+
+ /* The PC relative address is computed relative
+ to the instruction boundary, so in case immediate
+ fields follows, we need to adjust the value. */
+ if (pcrel && i.imm_operands)
+ {
+ int imm_size = 4;
+ register unsigned int n1;
+
+ for (n1 = 0; n1 < i.operands; n1++)
+ if (i.types[n1] & Imm)
+ {
+ if (i.types[n1] & (Imm8 | Imm8S | Imm16 | Imm64))
+ {
+ imm_size = 2;
+ if (i.types[n1] & (Imm8 | Imm8S))
+ imm_size = 1;
+ if (i.types[n1] & Imm64)
+ imm_size = 8;
+ }
+ break;
+ }
+ /* We should find the immediate. */
+ if (n1 == i.operands)
+ abort ();
+ i.op[n].disps->X_add_number -= imm_size;
+ }
- if (i.types[n] & Disp16)
- size = 2;
+ if (i.types[n] & Disp32S)
+ sign = 1;
+
+ if (i.types[n] & (Disp16 | Disp64))
+ {
+ size = 2;
+ if (i.types[n] & Disp64)
+ size = 8;
+ }
- insn_size += size;
p = frag_more (size);
fix_new_exp (frag_now, p - frag_now->fr_literal, size,
- i.op[n].disps, 0,
- reloc (size, 0, i.disp_reloc[n]));
+ i.op[n].disps, pcrel,
+ reloc (size, pcrel, sign, i.reloc[n]));
}
}
}
offsetT val;
size = 4;
- if (i.types[n] & (Imm8 | Imm8S | Imm16))
+ if (i.types[n] & (Imm8 | Imm8S | Imm16 | Imm64))
{
size = 2;
if (i.types[n] & (Imm8 | Imm8S))
size = 1;
+ else if (i.types[n] & Imm64)
+ size = 8;
}
val = offset_in_range (i.op[n].imms->X_add_number,
size);
- insn_size += size;
p = frag_more (size);
md_number_to_chars (p, val, size);
}
Need a 32-bit fixup (don't support 8bit
non-absolute imms). Try to support other
sizes ... */
-#ifdef BFD_ASSEMBLER
- enum bfd_reloc_code_real reloc_type;
-#else
- int reloc_type;
-#endif
+ RELOC_ENUM reloc_type;
int size = 4;
+ int sign = 0;
- if (i.types[n] & Imm16)
- size = 2;
- else if (i.types[n] & (Imm8 | Imm8S))
- size = 1;
+ if ((i.types[n] & (Imm32S))
+ && i.suffix == QWORD_MNEM_SUFFIX)
+ sign = 1;
+ if (i.types[n] & (Imm8 | Imm8S | Imm16 | Imm64))
+ {
+ size = 2;
+ if (i.types[n] & (Imm8 | Imm8S))
+ size = 1;
+ if (i.types[n] & Imm64)
+ size = 8;
+ }
- insn_size += size;
p = frag_more (size);
- reloc_type = reloc (size, 0, i.disp_reloc[0]);
+ reloc_type = reloc (size, 0, sign, i.reloc[n]);
#ifdef BFD_ASSEMBLER
if (reloc_type == BFD_RELOC_32
&& GOT_symbol
(i.op[n].imms->X_op_symbol)->X_op)
== O_subtract))))
{
+ /* We don't support dynamic linking on x86-64 yet. */
+ if (flag_code == CODE_64BIT)
+ abort ();
reloc_type = BFD_RELOC_386_GOTPC;
i.op[n].imms->X_add_number += 3;
}
}
}
\f
+#ifndef LEX_AT
+static char *lex_got PARAMS ((RELOC_ENUM *, int *));
+
+/* Parse operands of the form
+ <symbol>@GOTOFF+<nnn>
+ and similar .plt or .got references.
+
+ If we find one, set up the correct relocation in RELOC and copy the
+ input string, minus the `@GOTOFF' into a malloc'd buffer for
+ parsing by the calling routine. Return this buffer, and if ADJUST
+ is non-null set it to the length of the string we removed from the
+ input line. Otherwise return NULL. */
+static char *
+lex_got (reloc, adjust)
+ RELOC_ENUM *reloc;
+ int *adjust;
+{
+ static const char * const mode_name[NUM_FLAG_CODE] = { "32", "16", "64" };
+ static const struct {
+ const char *str;
+ const RELOC_ENUM rel[NUM_FLAG_CODE];
+ } gotrel[] = {
+ { "PLT", { BFD_RELOC_386_PLT32, 0, BFD_RELOC_X86_64_PLT32 } },
+ { "GOTOFF", { BFD_RELOC_386_GOTOFF, 0, 0 } },
+ { "GOTPCREL", { 0, 0, BFD_RELOC_X86_64_GOTPCREL } },
+ { "GOT", { BFD_RELOC_386_GOT32, 0, BFD_RELOC_X86_64_GOT32 } }
+ };
+ char *cp;
+ unsigned int j;
+
+ for (cp = input_line_pointer; *cp != '@'; cp++)
+ if (is_end_of_line[(unsigned char) *cp])
+ return NULL;
+
+ for (j = 0; j < sizeof (gotrel) / sizeof (gotrel[0]); j++)
+ {
+ int len;
+
+ len = strlen (gotrel[j].str);
+ if (strncasecmp (cp + 1, gotrel[j].str, len) == 0)
+ {
+ if (gotrel[j].rel[(unsigned int) flag_code] != 0)
+ {
+ int first, second;
+ char *tmpbuf, *past_reloc;
+
+ *reloc = gotrel[j].rel[(unsigned int) flag_code];
+ if (adjust)
+ *adjust = len;
+
+ if (GOT_symbol == NULL)
+ GOT_symbol = symbol_find_or_make (GLOBAL_OFFSET_TABLE_NAME);
+
+ /* Replace the relocation token with ' ', so that
+ errors like foo@GOTOFF1 will be detected. */
+
+ /* The length of the first part of our input line. */
+ first = cp - input_line_pointer;
+
+ /* The second part goes from after the reloc token until
+ (and including) an end_of_line char. Don't use strlen
+ here as the end_of_line char may not be a NUL. */
+ past_reloc = cp + 1 + len;
+ for (cp = past_reloc; !is_end_of_line[(unsigned char) *cp++]; )
+ ;
+ second = cp - past_reloc;
+
+ /* Allocate and copy string. The trailing NUL shouldn't
+ be necessary, but be safe. */
+ tmpbuf = xmalloc (first + second + 2);
+ memcpy (tmpbuf, input_line_pointer, first);
+ tmpbuf[first] = ' ';
+ memcpy (tmpbuf + first + 1, past_reloc, second);
+ tmpbuf[first + second + 1] = '\0';
+ return tmpbuf;
+ }
+
+ as_bad (_("@%s reloc is not supported in %s bit mode"),
+ gotrel[j].str, mode_name[(unsigned int) flag_code]);
+ return NULL;
+ }
+ }
+
+ /* Might be a symbol version string. Don't as_bad here. */
+ return NULL;
+}
+
+/* x86_cons_fix_new is called via the expression parsing code when a
+ reloc is needed. We use this hook to get the correct .got reloc. */
+static RELOC_ENUM got_reloc = NO_RELOC;
+
+void
+x86_cons_fix_new (frag, off, len, exp)
+ fragS *frag;
+ unsigned int off;
+ unsigned int len;
+ expressionS *exp;
+{
+ RELOC_ENUM r = reloc (len, 0, 0, got_reloc);
+ got_reloc = NO_RELOC;
+ fix_new_exp (frag, off, len, exp, 0, r);
+}
+
+void
+x86_cons (exp, size)
+ expressionS *exp;
+ int size;
+{
+ if (size == 4)
+ {
+ /* Handle @GOTOFF and the like in an expression. */
+ char *save;
+ char *gotfree_input_line;
+ int adjust;
+
+ save = input_line_pointer;
+ gotfree_input_line = lex_got (&got_reloc, &adjust);
+ if (gotfree_input_line)
+ input_line_pointer = gotfree_input_line;
+
+ expression (exp);
+
+ if (gotfree_input_line)
+ {
+ /* expression () has merrily parsed up to the end of line,
+ or a comma - in the wrong buffer. Transfer how far
+ input_line_pointer has moved to the right buffer. */
+ input_line_pointer = (save
+ + (input_line_pointer - gotfree_input_line)
+ + adjust);
+ free (gotfree_input_line);
+ }
+ }
+ else
+ expression (exp);
+}
+#endif
+
static int i386_immediate PARAMS ((char *));
static int
char *imm_start;
{
char *save_input_line_pointer;
+#ifndef LEX_AT
+ char *gotfree_input_line;
+#endif
segT exp_seg = 0;
expressionS *exp;
input_line_pointer = imm_start;
#ifndef LEX_AT
- {
- /* We can have operands of the form
- <symbol>@GOTOFF+<nnn>
- Take the easy way out here and copy everything
- into a temporary buffer... */
- register char *cp;
-
- cp = strchr (input_line_pointer, '@');
- if (cp != NULL)
- {
- char *tmpbuf;
- int len = 0;
- int first;
-
- /* GOT relocations are not supported in 16 bit mode. */
- if (flag_16bit_code)
- as_bad (_("GOT relocations not supported in 16 bit mode"));
-
- if (GOT_symbol == NULL)
- GOT_symbol = symbol_find_or_make (GLOBAL_OFFSET_TABLE_NAME);
-
- if (strncmp (cp + 1, "PLT", 3) == 0)
- {
- i.disp_reloc[this_operand] = BFD_RELOC_386_PLT32;
- len = 3;
- }
- else if (strncmp (cp + 1, "GOTOFF", 6) == 0)
- {
- i.disp_reloc[this_operand] = BFD_RELOC_386_GOTOFF;
- len = 6;
- }
- else if (strncmp (cp + 1, "GOT", 3) == 0)
- {
- i.disp_reloc[this_operand] = BFD_RELOC_386_GOT32;
- len = 3;
- }
- else
- as_bad (_("bad reloc specifier in expression"));
-
- /* Replace the relocation token with ' ', so that errors like
- foo@GOTOFF1 will be detected. */
- first = cp - input_line_pointer;
- tmpbuf = (char *) alloca (strlen (input_line_pointer));
- memcpy (tmpbuf, input_line_pointer, first);
- tmpbuf[first] = ' ';
- strcpy (tmpbuf + first + 1, cp + 1 + len);
- input_line_pointer = tmpbuf;
- }
- }
+ gotfree_input_line = lex_got (&i.reloc[this_operand], NULL);
+ if (gotfree_input_line)
+ input_line_pointer = gotfree_input_line;
#endif
exp_seg = expression (exp);
SKIP_WHITESPACE ();
if (*input_line_pointer)
- as_bad (_("ignoring junk `%s' after expression"), input_line_pointer);
+ as_bad (_("junk `%s' after expression"), input_line_pointer);
input_line_pointer = save_input_line_pointer;
+#ifndef LEX_AT
+ if (gotfree_input_line)
+ free (gotfree_input_line);
+#endif
if (exp->X_op == O_absent || exp->X_op == O_big)
{
exp->X_add_symbol = (symbolS *) 0;
exp->X_op_symbol = (symbolS *) 0;
}
-
- if (exp->X_op == O_constant)
+ else if (exp->X_op == O_constant)
{
/* Size it properly later. */
- i.types[this_operand] |= Imm32;
+ i.types[this_operand] |= Imm64;
+ /* If BFD64, sign extend val. */
+ if (!use_rela_relocations)
+ if ((exp->X_add_number & ~(((addressT) 2 << 31) - 1)) == 0)
+ exp->X_add_number = (exp->X_add_number ^ ((addressT) 1 << 31)) - ((addressT) 1 << 31);
}
#if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
else if (1
{
/* This is an address. The size of the address will be
determined later, depending on destination register,
- suffix, or the default for the section. We exclude
- Imm8S here so that `push $foo' and other instructions
- with an Imm8S form will use Imm16 or Imm32. */
- i.types[this_operand] |= (Imm8 | Imm16 | Imm32);
+ suffix, or the default for the section. */
+ i.types[this_operand] |= Imm8 | Imm16 | Imm32 | Imm32S | Imm64;
}
return 1;
}
-static int i386_scale PARAMS ((char *));
+static char *i386_scale PARAMS ((char *));
-static int
+static char *
i386_scale (scale)
char *scale;
{
- if (!isdigit (*scale))
- goto bad_scale;
+ offsetT val;
+ char *save = input_line_pointer;
+
+ input_line_pointer = scale;
+ val = get_absolute_expression ();
- switch (*scale)
+ switch (val)
{
- case '0':
- case '1':
+ case 0:
+ case 1:
i.log2_scale_factor = 0;
break;
- case '2':
+ case 2:
i.log2_scale_factor = 1;
break;
- case '4':
+ case 4:
i.log2_scale_factor = 2;
break;
- case '8':
+ case 8:
i.log2_scale_factor = 3;
break;
default:
- bad_scale:
as_bad (_("expecting scale factor of 1, 2, 4, or 8: got `%s'"),
scale);
- return 0;
+ input_line_pointer = save;
+ return NULL;
}
if (i.log2_scale_factor != 0 && ! i.index_reg)
{
i.log2_scale_factor = 0;
#endif
}
- return 1;
+ scale = input_line_pointer;
+ input_line_pointer = save;
+ return scale;
}
static int i386_displacement PARAMS ((char *, char *));
register expressionS *exp;
segT exp_seg = 0;
char *save_input_line_pointer;
+#ifndef LEX_AT
+ char *gotfree_input_line;
+#endif
int bigdisp = Disp32;
- if (flag_16bit_code ^ (i.prefix[ADDR_PREFIX] != 0))
+ if ((flag_code == CODE_16BIT) ^ (i.prefix[ADDR_PREFIX] != 0))
bigdisp = Disp16;
+ if (flag_code == CODE_64BIT)
+ bigdisp = Disp64;
i.types[this_operand] |= bigdisp;
exp = &disp_expressions[i.disp_operands];
}
#endif
#ifndef LEX_AT
- {
- /* We can have operands of the form
- <symbol>@GOTOFF+<nnn>
- Take the easy way out here and copy everything
- into a temporary buffer... */
- register char *cp;
-
- cp = strchr (input_line_pointer, '@');
- if (cp != NULL)
- {
- char *tmpbuf;
- int len = 0;
- int first;
-
- /* GOT relocations are not supported in 16 bit mode. */
- if (flag_16bit_code)
- as_bad (_("GOT relocations not supported in 16 bit mode"));
-
- if (GOT_symbol == NULL)
- GOT_symbol = symbol_find_or_make (GLOBAL_OFFSET_TABLE_NAME);
-
- if (strncmp (cp + 1, "PLT", 3) == 0)
- {
- i.disp_reloc[this_operand] = BFD_RELOC_386_PLT32;
- len = 3;
- }
- else if (strncmp (cp + 1, "GOTOFF", 6) == 0)
- {
- i.disp_reloc[this_operand] = BFD_RELOC_386_GOTOFF;
- len = 6;
- }
- else if (strncmp (cp + 1, "GOT", 3) == 0)
- {
- i.disp_reloc[this_operand] = BFD_RELOC_386_GOT32;
- len = 3;
- }
- else
- as_bad (_("bad reloc specifier in expression"));
-
- /* Replace the relocation token with ' ', so that errors like
- foo@GOTOFF1 will be detected. */
- first = cp - input_line_pointer;
- tmpbuf = (char *) alloca (strlen (input_line_pointer));
- memcpy (tmpbuf, input_line_pointer, first);
- tmpbuf[first] = ' ';
- strcpy (tmpbuf + first + 1, cp + 1 + len);
- input_line_pointer = tmpbuf;
- }
- }
+ gotfree_input_line = lex_got (&i.reloc[this_operand], NULL);
+ if (gotfree_input_line)
+ input_line_pointer = gotfree_input_line;
#endif
exp_seg = expression (exp);
+ SKIP_WHITESPACE ();
+ if (*input_line_pointer)
+ as_bad (_("junk `%s' after expression"), input_line_pointer);
+#if GCC_ASM_O_HACK
+ RESTORE_END_STRING (disp_end + 1);
+#endif
+ RESTORE_END_STRING (disp_end);
+ input_line_pointer = save_input_line_pointer;
+#ifndef LEX_AT
+ if (gotfree_input_line)
+ free (gotfree_input_line);
+#endif
+
#ifdef BFD_ASSEMBLER
/* We do this to make sure that the section symbol is in
the symbol table. We will ultimately change the relocation
to be relative to the beginning of the section. */
- if (i.disp_reloc[this_operand] == BFD_RELOC_386_GOTOFF)
+ if (i.reloc[this_operand] == BFD_RELOC_386_GOTOFF
+ || i.reloc[this_operand] == BFD_RELOC_X86_64_GOTPCREL)
{
- if (S_IS_LOCAL(exp->X_add_symbol)
+ if (exp->X_op != O_symbol)
+ {
+ as_bad (_("bad expression used with @%s"),
+ (i.reloc[this_operand] == BFD_RELOC_X86_64_GOTPCREL
+ ? "GOTPCREL"
+ : "GOTOFF"));
+ return 0;
+ }
+
+ if (S_IS_LOCAL (exp->X_add_symbol)
&& S_GET_SEGMENT (exp->X_add_symbol) != undefined_section)
section_symbol (S_GET_SEGMENT (exp->X_add_symbol));
- assert (exp->X_op == O_symbol);
exp->X_op = O_subtract;
exp->X_op_symbol = GOT_symbol;
- i.disp_reloc[this_operand] = BFD_RELOC_32;
+ if (i.reloc[this_operand] == BFD_RELOC_X86_64_GOTPCREL)
+ i.reloc[this_operand] = BFD_RELOC_32_PCREL;
+ else
+ i.reloc[this_operand] = BFD_RELOC_32;
}
#endif
- SKIP_WHITESPACE ();
- if (*input_line_pointer)
- as_bad (_("ignoring junk `%s' after expression"),
- input_line_pointer);
-#if GCC_ASM_O_HACK
- RESTORE_END_STRING (disp_end + 1);
-#endif
- RESTORE_END_STRING (disp_end);
- input_line_pointer = save_input_line_pointer;
-
if (exp->X_op == O_absent || exp->X_op == O_big)
{
/* Missing or bad expr becomes absolute 0. */
return 0;
}
#endif
+ else if (flag_code == CODE_64BIT)
+ i.types[this_operand] |= Disp32S | Disp32;
return 1;
}
-static int i386_index_check PARAMS((const char *));
+static int i386_index_check PARAMS ((const char *));
/* Make sure the memory operand we've been dealt is valid.
Return 1 on success, 0 on a failure. */
i386_index_check (operand_string)
const char *operand_string;
{
+ int ok;
#if INFER_ADDR_PREFIX
int fudged = 0;
tryprefix:
#endif
- if (flag_16bit_code ^ (i.prefix[ADDR_PREFIX] != 0)
- /* 16 bit mode checks. */
- ? ((i.base_reg
- && ((i.base_reg->reg_type & (Reg16|BaseIndex))
- != (Reg16|BaseIndex)))
- || (i.index_reg
- && (((i.index_reg->reg_type & (Reg16|BaseIndex))
- != (Reg16|BaseIndex))
- || ! (i.base_reg
- && i.base_reg->reg_num < 6
- && i.index_reg->reg_num >= 6
- && i.log2_scale_factor == 0))))
- /* 32 bit mode checks. */
- : ((i.base_reg
- && (i.base_reg->reg_type & Reg32) == 0)
- || (i.index_reg
- && ((i.index_reg->reg_type & (Reg32|BaseIndex))
- != (Reg32|BaseIndex)))))
+ ok = 1;
+ if (flag_code == CODE_64BIT)
+ {
+ /* 64bit checks. */
+ if ((i.base_reg
+ && ((i.base_reg->reg_type & Reg64) == 0)
+ && (i.base_reg->reg_type != BaseIndex
+ || i.index_reg))
+ || (i.index_reg
+ && ((i.index_reg->reg_type & (Reg64|BaseIndex))
+ != (Reg64|BaseIndex))))
+ ok = 0;
+ }
+ else
+ {
+ if ((flag_code == CODE_16BIT) ^ (i.prefix[ADDR_PREFIX] != 0))
+ {
+ /* 16bit checks. */
+ if ((i.base_reg
+ && ((i.base_reg->reg_type & (Reg16|BaseIndex|RegRex))
+ != (Reg16|BaseIndex)))
+ || (i.index_reg
+ && (((i.index_reg->reg_type & (Reg16|BaseIndex))
+ != (Reg16|BaseIndex))
+ || ! (i.base_reg
+ && i.base_reg->reg_num < 6
+ && i.index_reg->reg_num >= 6
+ && i.log2_scale_factor == 0))))
+ ok = 0;
+ }
+ else
+ {
+ /* 32bit checks. */
+ if ((i.base_reg
+ && (i.base_reg->reg_type & (Reg32 | RegRex)) != Reg32)
+ || (i.index_reg
+ && ((i.index_reg->reg_type & (Reg32|BaseIndex|RegRex))
+ != (Reg32|BaseIndex))))
+ ok = 0;
+ }
+ }
+ if (!ok)
{
#if INFER_ADDR_PREFIX
- if (i.prefix[ADDR_PREFIX] == 0 && stackop_size != '\0')
+ if (flag_code != CODE_64BIT
+ && i.prefix[ADDR_PREFIX] == 0 && stackop_size != '\0')
{
i.prefix[ADDR_PREFIX] = ADDR_PREFIX_OPCODE;
i.prefixes += 1;
#endif
as_bad (_("`%s' is not a valid %s bit base/index expression"),
operand_string,
- flag_16bit_code ^ (i.prefix[ADDR_PREFIX] != 0) ? "16" : "32");
+ flag_code_names[flag_code]);
return 0;
}
return 1;
}
else if (is_digit_char (*op_string)
|| is_identifier_char (*op_string)
- || *op_string == '(' )
+ || *op_string == '(')
{
/* This is a memory reference of some sort. */
char *base_string;
if (is_space_char (*base_string))
++base_string;
}
- else if (*base_string != ')' )
+ else if (*base_string != ')')
{
as_bad (_("expecting `,' or `)' after index register in `%s'"),
operand_string);
}
/* Check for scale factor. */
- if (isdigit ((unsigned char) *base_string))
+ if (*base_string != ')')
{
- if (!i386_scale (base_string))
+ char *end_scale = i386_scale (base_string);
+
+ if (!end_scale)
return 0;
- ++base_string;
+ base_string = end_scale;
if (is_space_char (*base_string))
++base_string;
if (*base_string != ')')
/* Symbol is undefined in this segment, or we need to keep a
reloc so that weak symbols can be overridden. */
int size = (fragP->fr_subtype & CODE16) ? 2 : 4;
-#ifdef BFD_ASSEMBLER
- enum bfd_reloc_code_real reloc_type;
-#else
- int reloc_type;
-#endif
+ RELOC_ENUM reloc_type;
unsigned char *opcode;
int old_fr_fix;
old_fr_fix = fragP->fr_fix;
opcode = (unsigned char *) fragP->fr_opcode;
- switch (opcode[0])
+ switch (TYPE_FROM_RELAX_STATE (fragP->fr_subtype))
{
- case JUMP_PC_RELATIVE:
- /* Make jmp (0xeb) a dword displacement jump. */
+ case UNCOND_JUMP:
+ /* Make jmp (0xeb) a (d)word displacement jump. */
opcode[0] = 0xe9;
fragP->fr_fix += size;
fix_new (fragP, old_fr_fix, size,
reloc_type);
break;
- default:
+ case COND_JUMP86:
+ if (no_cond_jump_promotion)
+ goto relax_guess;
+
+ if (size == 2)
+ {
+ /* Negate the condition, and branch past an
+ unconditional jump. */
+ opcode[0] ^= 1;
+ opcode[1] = 3;
+ /* Insert an unconditional jump. */
+ opcode[2] = 0xe9;
+ /* We added two extra opcode bytes, and have a two byte
+ offset. */
+ fragP->fr_fix += 2 + 2;
+ fix_new (fragP, old_fr_fix + 2, 2,
+ fragP->fr_symbol,
+ fragP->fr_offset, 1,
+ reloc_type);
+ break;
+ }
+ /* Fall through. */
+
+ case COND_JUMP:
+ if (no_cond_jump_promotion)
+ goto relax_guess;
+
/* This changes the byte-displacement jump 0x7N
- to the dword-displacement jump 0x0f,0x8N. */
+ to the (d)word-displacement jump 0x0f,0x8N. */
opcode[1] = opcode[0] + 0x10;
opcode[0] = TWO_BYTE_OPCODE_ESCAPE;
/* We've added an opcode byte. */
fragP->fr_offset, 1,
reloc_type);
break;
+
+ default:
+ BAD_CASE (fragP->fr_subtype);
+ break;
}
frag_wane (fragP);
return fragP->fr_fix - old_fr_fix;
}
- /* Guess a short jump. */
- return 1;
+
+ relax_guess:
+ /* Guess size depending on current relax state. Initially the relax
+ state will correspond to a short jump and we return 1, because
+ the variable part of the frag (the branch offset) is one byte
+ long. However, we can relax a section more than once and in that
+ case we must either set fr_subtype back to the unrelaxed state,
+ or return the value for the appropriate branch. */
+ return md_relax_table[fragP->fr_subtype].rlx_length;
}
/* Called after relax() is finished.
/* Address we want to reach in file space. */
target_address = S_GET_VALUE (fragP->fr_symbol) + fragP->fr_offset;
-#ifdef BFD_ASSEMBLER
- /* Not needed otherwise? */
- target_address += symbol_get_frag (fragP->fr_symbol)->fr_address;
-#endif
/* Address opcode resides at in file space. */
opcode_address = fragP->fr_address + fragP->fr_fix;
/* Displacement from opcode start to fill into instruction. */
displacement_from_opcode_start = target_address - opcode_address;
- switch (fragP->fr_subtype)
+ if ((fragP->fr_subtype & BIG) == 0)
{
- case ENCODE_RELAX_STATE (COND_JUMP, SMALL):
- case ENCODE_RELAX_STATE (COND_JUMP, SMALL16):
- case ENCODE_RELAX_STATE (UNCOND_JUMP, SMALL):
- case ENCODE_RELAX_STATE (UNCOND_JUMP, SMALL16):
/* Don't have to change opcode. */
extension = 1; /* 1 opcode + 1 displacement */
where_to_put_displacement = &opcode[1];
- break;
+ }
+ else
+ {
+ if (no_cond_jump_promotion
+ && TYPE_FROM_RELAX_STATE (fragP->fr_subtype) != UNCOND_JUMP)
+ as_warn_where (fragP->fr_file, fragP->fr_line, _("long jump required"));
- case ENCODE_RELAX_STATE (COND_JUMP, BIG):
- extension = 5; /* 2 opcode + 4 displacement */
- opcode[1] = opcode[0] + 0x10;
- opcode[0] = TWO_BYTE_OPCODE_ESCAPE;
- where_to_put_displacement = &opcode[2];
- break;
+ switch (fragP->fr_subtype)
+ {
+ case ENCODE_RELAX_STATE (UNCOND_JUMP, BIG):
+ extension = 4; /* 1 opcode + 4 displacement */
+ opcode[0] = 0xe9;
+ where_to_put_displacement = &opcode[1];
+ break;
- case ENCODE_RELAX_STATE (UNCOND_JUMP, BIG):
- extension = 4; /* 1 opcode + 4 displacement */
- opcode[0] = 0xe9;
- where_to_put_displacement = &opcode[1];
- break;
+ case ENCODE_RELAX_STATE (UNCOND_JUMP, BIG16):
+ extension = 2; /* 1 opcode + 2 displacement */
+ opcode[0] = 0xe9;
+ where_to_put_displacement = &opcode[1];
+ break;
- case ENCODE_RELAX_STATE (COND_JUMP, BIG16):
- extension = 3; /* 2 opcode + 2 displacement */
- opcode[1] = opcode[0] + 0x10;
- opcode[0] = TWO_BYTE_OPCODE_ESCAPE;
- where_to_put_displacement = &opcode[2];
- break;
+ case ENCODE_RELAX_STATE (COND_JUMP, BIG):
+ case ENCODE_RELAX_STATE (COND_JUMP86, BIG):
+ extension = 5; /* 2 opcode + 4 displacement */
+ opcode[1] = opcode[0] + 0x10;
+ opcode[0] = TWO_BYTE_OPCODE_ESCAPE;
+ where_to_put_displacement = &opcode[2];
+ break;
- case ENCODE_RELAX_STATE (UNCOND_JUMP, BIG16):
- extension = 2; /* 1 opcode + 2 displacement */
- opcode[0] = 0xe9;
- where_to_put_displacement = &opcode[1];
- break;
+ case ENCODE_RELAX_STATE (COND_JUMP, BIG16):
+ extension = 3; /* 2 opcode + 2 displacement */
+ opcode[1] = opcode[0] + 0x10;
+ opcode[0] = TWO_BYTE_OPCODE_ESCAPE;
+ where_to_put_displacement = &opcode[2];
+ break;
- default:
- BAD_CASE (fragP->fr_subtype);
- break;
+ case ENCODE_RELAX_STATE (COND_JUMP86, BIG16):
+ extension = 4;
+ opcode[0] ^= 1;
+ opcode[1] = 3;
+ opcode[2] = 0xe9;
+ where_to_put_displacement = &opcode[3];
+ break;
+
+ default:
+ BAD_CASE (fragP->fr_subtype);
+ break;
+ }
}
+
/* Now put displacement after opcode. */
md_number_to_chars ((char *) where_to_put_displacement,
(valueT) (displacement_from_opcode_start - extension),
- SIZE_FROM_RELAX_STATE (fragP->fr_subtype));
+ DISP_SIZE_FROM_RELAX_STATE (fragP->fr_subtype));
fragP->fr_fix += extension;
}
\f
if ((fixP->fx_r_type == BFD_RELOC_32_PCREL
|| fixP->fx_r_type == BFD_RELOC_16_PCREL
|| fixP->fx_r_type == BFD_RELOC_8_PCREL)
- && fixP->fx_addsy)
+ && fixP->fx_addsy && !use_rela_relocations)
{
#ifndef OBJ_AOUT
if (OUTPUT_FLAVOR == bfd_target_elf_flavour
switch (fixP->fx_r_type)
{
case BFD_RELOC_386_PLT32:
+ case BFD_RELOC_X86_64_PLT32:
/* Make the jump instruction point to the address of the operand. At
runtime we merely add the offset to the actual PLT entry. */
value = -4;
value -= 1;
break;
case BFD_RELOC_386_GOT32:
+ case BFD_RELOC_X86_64_GOT32:
value = 0; /* Fully resolved at runtime. No addend. */
break;
case BFD_RELOC_386_GOTOFF:
+ case BFD_RELOC_X86_64_GOTPCREL:
break;
case BFD_RELOC_VTABLE_INHERIT:
#endif /* defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) */
*valp = value;
#endif /* defined (BFD_ASSEMBLER) && !defined (TE_Mach) */
+
+#ifndef BFD_ASSEMBLER
+ md_number_to_chars (p, value, fixP->fx_size);
+#else
+ /* Are we finished with this relocation now? */
+ if (fixP->fx_addsy == 0 && fixP->fx_pcrel == 0)
+ fixP->fx_done = 1;
+ else if (use_rela_relocations)
+ {
+ fixP->fx_no_overflow = 1;
+ value = 0;
+ }
md_number_to_chars (p, value, fixP->fx_size);
+#endif
return 1;
}
#else
const char *md_shortopts = "q";
#endif
+
struct option md_longopts[] = {
+#define OPTION_32 (OPTION_MD_BASE + 0)
+ {"32", no_argument, NULL, OPTION_32},
+#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
+#define OPTION_64 (OPTION_MD_BASE + 1)
+ {"64", no_argument, NULL, OPTION_64},
+#endif
{NULL, no_argument, NULL, 0}
};
size_t md_longopts_size = sizeof (md_longopts);
/* -s: On i386 Solaris, this tells the native assembler to use
.stab instead of .stab.excl. We always use .stab anyhow. */
break;
+
+ case OPTION_64:
+ {
+ const char **list, **l;
+
+ list = bfd_target_list ();
+ for (l = list; *l != NULL; l++)
+ if (strcmp (*l, "elf64-x86-64") == 0)
+ {
+ default_arch = "x86_64";
+ break;
+ }
+ if (*l == NULL)
+ as_fatal (_("No compiled in support for x86_64"));
+ free (list);
+ }
+ break;
#endif
+ case OPTION_32:
+ default_arch = "i386";
+ break;
+
default:
return 0;
}
}
#ifdef BFD_ASSEMBLER
-#if ((defined (OBJ_MAYBE_ELF) && defined (OBJ_MAYBE_COFF)) \
- || (defined (OBJ_MAYBE_ELF) && defined (OBJ_MAYBE_AOUT)) \
- || (defined (OBJ_MAYBE_COFF) && defined (OBJ_MAYBE_AOUT)))
+#if ((defined (OBJ_MAYBE_COFF) && defined (OBJ_MAYBE_AOUT)) \
+ || defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF))
/* Pick the target format to use. */
const char *
i386_target_format ()
{
+ if (!strcmp (default_arch, "x86_64"))
+ set_code_flag (CODE_64BIT);
+ else if (!strcmp (default_arch, "i386"))
+ set_code_flag (CODE_32BIT);
+ else
+ as_fatal (_("Unknown architecture"));
switch (OUTPUT_FLAVOR)
{
#ifdef OBJ_MAYBE_AOUT
case bfd_target_coff_flavour:
return "coff-i386";
#endif
-#ifdef OBJ_MAYBE_ELF
+#if defined (OBJ_MAYBE_ELF) || defined (OBJ_ELF)
case bfd_target_elf_flavour:
- return "elf32-i386";
+ {
+ if (flag_code == CODE_64BIT)
+ use_rela_relocations = 1;
+ return flag_code == CODE_64BIT ? "elf64-x86-64" : "elf32-i386";
+ }
#endif
default:
abort ();
{
if (fixp->fx_subsy && fixp->fx_subsy == GOT_symbol)
{
- fixp->fx_r_type = BFD_RELOC_386_GOTOFF;
+ /* GOTOFF relocation are nonsense in 64bit mode. */
+ if (fixp->fx_r_type == BFD_RELOC_32_PCREL)
+ {
+ if (flag_code != CODE_64BIT)
+ abort ();
+ fixp->fx_r_type = BFD_RELOC_X86_64_GOTPCREL;
+ }
+ else
+ {
+ if (flag_code == CODE_64BIT)
+ abort ();
+ fixp->fx_r_type = BFD_RELOC_386_GOTOFF;
+ }
fixp->fx_subsy = 0;
}
}
switch (fixp->fx_r_type)
{
+ case BFD_RELOC_X86_64_PLT32:
+ case BFD_RELOC_X86_64_GOT32:
+ case BFD_RELOC_X86_64_GOTPCREL:
case BFD_RELOC_386_PLT32:
case BFD_RELOC_386_GOT32:
case BFD_RELOC_386_GOTOFF:
case BFD_RELOC_386_GOTPC:
+ case BFD_RELOC_X86_64_32S:
case BFD_RELOC_RVA:
case BFD_RELOC_VTABLE_ENTRY:
case BFD_RELOC_VTABLE_INHERIT:
switch (fixp->fx_size)
{
default:
- as_bad (_("can not do %d byte pc-relative relocation"),
- fixp->fx_size);
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("can not do %d byte pc-relative relocation"),
+ fixp->fx_size);
code = BFD_RELOC_32_PCREL;
break;
case 1: code = BFD_RELOC_8_PCREL; break;
switch (fixp->fx_size)
{
default:
- as_bad (_("can not do %d byte relocation"), fixp->fx_size);
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("can not do %d byte relocation"),
+ fixp->fx_size);
code = BFD_RELOC_32;
break;
case 1: code = BFD_RELOC_8; break;
case 2: code = BFD_RELOC_16; break;
case 4: code = BFD_RELOC_32; break;
+ case 8: code = BFD_RELOC_64; break;
}
}
break;
if (code == BFD_RELOC_32
&& GOT_symbol
&& fixp->fx_addsy == GOT_symbol)
- code = BFD_RELOC_386_GOTPC;
+ {
+ /* We don't support GOTPC on 64bit targets. */
+ if (flag_code == CODE_64BIT)
+ abort ();
+ code = BFD_RELOC_386_GOTPC;
+ }
rel = (arelent *) xmalloc (sizeof (arelent));
rel->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
*rel->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
rel->address = fixp->fx_frag->fr_address + fixp->fx_where;
- /* HACK: Since i386 ELF uses Rel instead of Rela, encode the
- vtable entry to be used in the relocation's section offset. */
- if (fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
- rel->address = fixp->fx_offset;
+ if (!use_rela_relocations)
+ {
+ /* HACK: Since i386 ELF uses Rel instead of Rela, encode the
+ vtable entry to be used in the relocation's section offset. */
+ if (fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
+ rel->address = fixp->fx_offset;
- if (fixp->fx_pcrel)
- rel->addend = fixp->fx_addnumber;
+ if (fixp->fx_pcrel)
+ rel->addend = fixp->fx_addnumber;
+ else
+ rel->addend = 0;
+ }
+ /* Use the rela in 64bit mode. */
else
- rel->addend = 0;
+ {
+ rel->addend = fixp->fx_offset;
+ if (fixp->fx_pcrel)
+ rel->addend -= fixp->fx_size;
+ }
rel->howto = bfd_reloc_type_lookup (stdoutput, code);
if (rel->howto == NULL)
dataType BYTE | WORD | DWORD | QWORD | XWORD
digits decdigit
- | digits decdigit
- | digits hexdigit
+ | digits decdigit
+ | digits hexdigit
decdigit [0-9]
e05 e05 addOp e06
- | e06
+ | e06
e06 e06 mulOp e09
- | e09
+ | e09
e09 OFFSET e10
| e09 PTR e10
| e10
e10 e10 [ expr ]
- | e11
+ | e11
e11 ( expr )
- | [ expr ]
+ | [ expr ]
| constant
| dataType
| id
| register
=> expr SHORT e05
- | e05
+ | e05
gpRegister AX | EAX | BX | EBX | CX | ECX | DX | EDX
- | BP | EBP | SP | ESP | DI | EDI | SI | ESI
+ | BP | EBP | SP | ESP | DI | EDI | SI | ESI
hexdigit a | b | c | d | e | f
- | A | B | C | D | E | F
+ | A | B | C | D | E | F
id alpha
- | id alpha
+ | id alpha
| id decdigit
mulOp * | / | MOD
quote " | '
register specialRegister
- | gpRegister
+ | gpRegister
| byteRegister
segmentRegister CS | DS | ES | FS | GS | SS
specialRegister CR0 | CR2 | CR3
- | DR0 | DR1 | DR2 | DR3 | DR6 | DR7
+ | DR0 | DR1 | DR2 | DR3 | DR6 | DR7
| TR3 | TR4 | TR5 | TR6 | TR7
We simplify the grammar in obvious places (e.g., register parsing is
to implement a recursive-descent parser.
expr SHORT e05
- | e05
+ | e05
e05 e06 e05'
e05' addOp e06 e05'
- | Empty
+ | Empty
e06 e09 e06'
e06' mulOp e09 e06'
- | Empty
+ | Empty
e09 OFFSET e10 e09'
- | e10 e09'
+ | e10 e09'
e09' PTR e10 e09'
- | : e10 e09'
+ | : e10 e09'
| Empty
e10 e11 e10'
e10' [ expr ] e10'
- | Empty
+ | Empty
e11 ( expr )
- | [ expr ]
+ | [ expr ]
| BYTE
| WORD
| DWORD
static struct intel_token cur_token, prev_token;
-/* Token codes for the intel parser. */
+/* Token codes for the intel parser. Since T_SHORT is already used
+ by COFF, undefine it first to prevent a warning. */
#define T_NIL -1
#define T_CONST 1
#define T_REG 2
#define T_DWORD 5
#define T_QWORD 6
#define T_XWORD 7
+#undef T_SHORT
#define T_SHORT 8
#define T_OFFSET 9
#define T_PTR 10
cur_token.str = prev_token.str = NULL;
/* Initialize parser structure. */
- p = intel_parser.op_string = (char *)malloc (strlen (operand_string) + 1);
+ p = intel_parser.op_string = (char *) malloc (strlen (operand_string) + 1);
if (p == NULL)
abort ();
strcpy (intel_parser.op_string, operand_string);
intel_parser.op_modifier = -1;
intel_parser.is_mem = 0;
intel_parser.reg = NULL;
- intel_parser.disp = (char *)malloc (strlen (operand_string) + 1);
+ intel_parser.disp = (char *) malloc (strlen (operand_string) + 1);
if (intel_parser.disp == NULL)
abort ();
intel_parser.disp[0] = '\0';
}
/* expr SHORT e05
- | e05 */
+ | e05 */
static int
intel_expr ()
{
/* e06 e09 e06'
e06' mulOp e09 e06'
- | Empty */
+ | Empty */
static int
intel_e06 ()
{
}
/* e09 OFFSET e10 e09'
- | e10 e09'
+ | e10 e09'
e09' PTR e10 e09'
- | : e10 e09'
+ | : e10 e09'
| Empty */
static int
intel_e09 ()
}
else if (prev_token.code == T_QWORD)
- i.suffix = DWORD_MNEM_SUFFIX;
+ {
+ if (intel_parser.got_a_float == 1) /* "f..." */
+ i.suffix = LONG_MNEM_SUFFIX;
+ else
+ i.suffix = QWORD_MNEM_SUFFIX;
+ }
else if (prev_token.code == T_XWORD)
i.suffix = LONG_DOUBLE_MNEM_SUFFIX;
/* e09 : e10 e09' */
else if (cur_token.code == ':')
{
- intel_parser.is_mem = 1;
+ /* Mark as a memory operand only if it's not already known to be an
+ offset expression. */
+ if (intel_parser.op_modifier != OFFSET_FLAT)
+ intel_parser.is_mem = 1;
return (intel_match_token (':') && intel_e10 () && intel_e09_1 ());
}
/* e10 e11 e10'
e10' [ expr ] e10'
- | Empty */
+ | Empty */
static int
intel_e10 ()
{
if (cur_token.code == '[')
{
intel_match_token ('[');
- intel_parser.is_mem = 1;
+
+ /* Mark as a memory operand only if it's not already known to be an
+ offset expression. If it's an offset expression, we need to keep
+ the brace in. */
+ if (intel_parser.op_modifier != OFFSET_FLAT)
+ intel_parser.is_mem = 1;
+ else
+ strcat (intel_parser.disp, "[");
/* Add a '+' to the displacement string if necessary. */
- if (*intel_parser.disp != '\0')
+ if (*intel_parser.disp != '\0'
+ && *(intel_parser.disp + strlen (intel_parser.disp) - 1) != '+')
strcat (intel_parser.disp, "+");
- return (intel_expr () && intel_match_token (']') && intel_e10_1 ());
+ if (intel_expr () && intel_match_token (']'))
+ {
+ /* Preserve brackets when the operand is an offset expression. */
+ if (intel_parser.op_modifier == OFFSET_FLAT)
+ strcat (intel_parser.disp, "]");
+
+ return intel_e10_1 ();
+ }
+ else
+ return 0;
}
/* e10' Empty */
}
/* e11 ( expr )
- | [ expr ]
+ | [ expr ]
| BYTE
| WORD
| DWORD
strcat (intel_parser.disp, "(");
if (intel_expr () && intel_match_token (')'))
- {
- strcat (intel_parser.disp, ")");
- return 1;
- }
+ {
+ strcat (intel_parser.disp, ")");
+ return 1;
+ }
else
return 0;
}
else if (cur_token.code == '[')
{
intel_match_token ('[');
- intel_parser.is_mem = 1;
+
+ /* Mark as a memory operand only if it's not already known to be an
+ offset expression. If it's an offset expression, we need to keep
+ the brace in. */
+ if (intel_parser.op_modifier != OFFSET_FLAT)
+ intel_parser.is_mem = 1;
+ else
+ strcat (intel_parser.disp, "[");
/* Operands for jump/call inside brackets denote absolute addresses. */
if (current_templates->start->opcode_modifier & Jump
i.types[this_operand] |= JumpAbsolute;
/* Add a '+' to the displacement string if necessary. */
- if (*intel_parser.disp != '\0')
+ if (*intel_parser.disp != '\0'
+ && *(intel_parser.disp + strlen (intel_parser.disp) - 1) != '+')
strcat (intel_parser.disp, "+");
- return (intel_expr () && intel_match_token (']'));
+ if (intel_expr () && intel_match_token (']'))
+ {
+ /* Preserve brackets when the operand is an offset expression. */
+ if (intel_parser.op_modifier == OFFSET_FLAT)
+ strcat (intel_parser.disp, "]");
+
+ return 1;
+ }
+ else
+ return 0;
}
/* e11 BYTE
{
strcat (intel_parser.disp, cur_token.str);
intel_match_token (cur_token.code);
- intel_parser.is_mem = 1;
+
+ /* Mark as a memory operand only if it's not already known to be an
+ offset expression. */
+ if (intel_parser.op_modifier != OFFSET_FLAT)
+ intel_parser.is_mem = 1;
return 1;
}
/* The identifier represents a memory reference only if it's not
preceded by an offset modifier. */
- if (intel_parser.op_modifier != OFFSET_FLAT
- && intel_parser.op_modifier != FLAT)
+ if (intel_parser.op_modifier != OFFSET_FLAT)
intel_parser.is_mem = 1;
return 1;
/* e11 constant */
else if (cur_token.code == T_CONST
- || cur_token.code == '-'
+ || cur_token.code == '-'
|| cur_token.code == '+')
{
char *save_str;
}
}
- save_str = (char *)malloc (strlen (cur_token.str) + 1);
+ save_str = (char *) malloc (strlen (cur_token.str) + 1);
if (save_str == NULL)
- abort();
+ abort ();
strcpy (save_str, cur_token.str);
/* Get the next token to check for register scaling. */
token from the operand string. */
static int
intel_match_token (code)
- int code;
+ int code;
{
if (cur_token.code == code)
{
/* The new token cannot be larger than the remainder of the operand
string. */
- new_token.str = (char *)malloc (strlen (intel_parser.op_string) + 1);
+ new_token.str = (char *) malloc (strlen (intel_parser.op_string) + 1);
if (new_token.str == NULL)
- abort();
+ abort ();
new_token.str[0] = '\0';
if (strchr ("0123456789", *intel_parser.op_string))