/* i386.c -- Assemble code for the Intel 80386
- Copyright (C) 1989, 91, 92, 93, 94, 95, 96, 97, 98, 99, 2000
+ Copyright 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ 2000, 2001, 2002, 2003, 2004
Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
/* Intel 80386 machine specific gas.
Written by Eliot Dresselhaus (eliot@mgm.mit.edu).
+ x86_64 support by Jan Hubicka (jh@suse.cz)
+ VIA PadLock support by Michal Ludvig (mludvig@suse.cz)
Bugs & suggestions are completely welcome. This is free software.
Please help us make it better. */
-#include <ctype.h>
-
#include "as.h"
+#include "safe-ctype.h"
#include "subsegs.h"
#include "dwarf2dbg.h"
+#include "dw2gencfi.h"
#include "opcode/i386.h"
+#include "elf/x86-64.h"
#ifndef REGISTER_WARNINGS
#define REGISTER_WARNINGS 1
#define SCALE1_WHEN_NO_INDEX 1
#endif
-#define true 1
-#define false 0
+#ifndef DEFAULT_ARCH
+#define DEFAULT_ARCH "i386"
+#endif
+
+#ifndef INLINE
+#if __GNUC__ >= 2
+#define INLINE __inline__
+#else
+#define INLINE
+#endif
+#endif
-static unsigned int mode_from_disp_size PARAMS ((unsigned int));
-static int fits_in_signed_byte PARAMS ((offsetT));
-static int fits_in_unsigned_byte PARAMS ((offsetT));
-static int fits_in_unsigned_word PARAMS ((offsetT));
-static int fits_in_signed_word PARAMS ((offsetT));
+static INLINE unsigned int mode_from_disp_size PARAMS ((unsigned int));
+static INLINE int fits_in_signed_byte PARAMS ((offsetT));
+static INLINE int fits_in_unsigned_byte PARAMS ((offsetT));
+static INLINE int fits_in_unsigned_word PARAMS ((offsetT));
+static INLINE int fits_in_signed_word PARAMS ((offsetT));
+static INLINE int fits_in_unsigned_long PARAMS ((offsetT));
+static INLINE int fits_in_signed_long PARAMS ((offsetT));
static int smallest_imm_type PARAMS ((offsetT));
static offsetT offset_in_range PARAMS ((offsetT, int));
static int add_prefix PARAMS ((unsigned int));
-static void set_16bit_code_flag PARAMS ((int));
+static void set_code_flag PARAMS ((int));
static void set_16bit_gcc_code_flag PARAMS ((int));
static void set_intel_syntax PARAMS ((int));
static void set_cpu_arch PARAMS ((int));
-
-#ifdef BFD_ASSEMBLER
-static bfd_reloc_code_real_type reloc
- PARAMS ((int, int, bfd_reloc_code_real_type));
+#ifdef TE_PE
+static void pe_directive_secrel PARAMS ((int));
+#endif
+static char *output_invalid PARAMS ((int c));
+static int i386_operand PARAMS ((char *operand_string));
+static int i386_intel_operand PARAMS ((char *operand_string, int got_a_float));
+static const reg_entry *parse_register PARAMS ((char *reg_string,
+ char **end_op));
+static char *parse_insn PARAMS ((char *, char *));
+static char *parse_operands PARAMS ((char *, const char *));
+static void swap_operands PARAMS ((void));
+static void optimize_imm PARAMS ((void));
+static void optimize_disp PARAMS ((void));
+static int match_template PARAMS ((void));
+static int check_string PARAMS ((void));
+static int process_suffix PARAMS ((void));
+static int check_byte_reg PARAMS ((void));
+static int check_long_reg PARAMS ((void));
+static int check_qword_reg PARAMS ((void));
+static int check_word_reg PARAMS ((void));
+static int finalize_imm PARAMS ((void));
+static int process_operands PARAMS ((void));
+static const seg_entry *build_modrm_byte PARAMS ((void));
+static void output_insn PARAMS ((void));
+static void output_branch PARAMS ((void));
+static void output_jump PARAMS ((void));
+static void output_interseg_jump PARAMS ((void));
+static void output_imm PARAMS ((fragS *insn_start_frag,
+ offsetT insn_start_off));
+static void output_disp PARAMS ((fragS *insn_start_frag,
+ offsetT insn_start_off));
+#ifndef I386COFF
+static void s_bss PARAMS ((int));
#endif
+static const char *default_arch = DEFAULT_ARCH;
+
/* 'md_assemble ()' gathers together information and puts it into a
i386_insn. */
operand. */
union i386_op op[MAX_OPERANDS];
+ /* Flags for operands. */
+ unsigned int flags[MAX_OPERANDS];
+#define Operand_PCrel 1
+
/* Relocation type for operand */
-#ifdef BFD_ASSEMBLER
- enum bfd_reloc_code_real disp_reloc[MAX_OPERANDS];
-#else
- int disp_reloc[MAX_OPERANDS];
-#endif
+ enum bfd_reloc_code_real reloc[MAX_OPERANDS];
/* BASE_REG, INDEX_REG, and LOG2_SCALE_FACTOR are used to encode
the base index byte below. */
addressing modes of this insn are encoded. */
modrm_byte rm;
+ rex_byte rex;
sib_byte sib;
};
/* List of chars besides those in app.c:symbol_chars that can start an
operand. Used to prevent the scrubber eating vital white-space. */
+const char extra_symbol_chars[] = "*%-(["
#ifdef LEX_AT
-const char extra_symbol_chars[] = "*%-(@";
-#else
-const char extra_symbol_chars[] = "*%-(";
+ "@"
#endif
-
+#ifdef LEX_QM
+ "?"
+#endif
+ ;
+
+#if (defined (TE_I386AIX) \
+ || ((defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)) \
+ && !defined (TE_LINUX) \
+ && !defined (TE_NETWARE) \
+ && !defined (TE_FreeBSD) \
+ && !defined (TE_NetBSD)))
/* This array holds the chars that always start a comment. If the
pre-processor is disabled, these aren't very useful. */
-#if defined (TE_I386AIX) || ((defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)) && ! defined (TE_LINUX) && !defined(TE_FreeBSD))
-/* Putting '/' here makes it impossible to use the divide operator.
- However, we need it for compatibility with SVR4 systems. */
const char comment_chars[] = "#/";
#define PREFIX_SEPARATOR '\\'
-#else
-const char comment_chars[] = "#";
-#define PREFIX_SEPARATOR '/'
-#endif
/* This array holds the chars that only start a comment at the beginning of
a line. If the line seems to have the form '# 123 filename'
#NO_APP at the beginning of its output.
Also note that comments started like this one will always work if
'/' isn't otherwise defined. */
-#if defined (TE_I386AIX) || ((defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)) && ! defined (TE_LINUX) && !defined(TE_FreeBSD))
-const char line_comment_chars[] = "";
+const char line_comment_chars[] = "#";
+
#else
-const char line_comment_chars[] = "/";
+/* Putting '/' here makes it impossible to use the divide operator.
+ However, we need it for compatibility with SVR4 systems. */
+const char comment_chars[] = "#";
+#define PREFIX_SEPARATOR '/'
+
+const char line_comment_chars[] = "/#";
#endif
const char line_separator_chars[] = ";";
#define is_identifier_char(x) (identifier_chars[(unsigned char) x])
#define is_digit_char(x) (digit_chars[(unsigned char) x])
-/* All non-digit non-letter charcters that may occur in an operand. */
+/* All non-digit non-letter characters that may occur in an operand. */
static char operand_special_chars[] = "%$-+(,)*._~/<>|&^!:[@]";
/* md_assemble() always leaves the strings it's passed unaltered. To
/* Current operand we are working on. */
static int this_operand;
-/* 1 if we're writing 16-bit code,
- 0 if 32-bit. */
-static int flag_16bit_code;
+/* We support four different modes. FLAG_CODE variable is used to distinguish
+ these. */
+
+enum flag_code {
+ CODE_32BIT,
+ CODE_16BIT,
+ CODE_64BIT };
+#define NUM_FLAG_CODE ((int) CODE_64BIT + 1)
+
+static enum flag_code flag_code;
+static int use_rela_relocations = 0;
+
+/* The names used to print error messages. */
+static const char *flag_code_names[] =
+ {
+ "32",
+ "16",
+ "64"
+ };
/* 1 for intel syntax,
0 if att syntax. */
frame as in 32 bit mode. */
static char stackop_size = '\0';
+/* Non-zero to optimize code alignment. */
+int optimize_align_code = 1;
+
/* Non-zero to quieten some warnings. */
static int quiet_warnings = 0;
/* CPU name. */
static const char *cpu_arch_name = NULL;
+static const char *cpu_sub_arch_name = NULL;
/* CPU feature flags. */
-static unsigned int cpu_arch_flags = 0;
+static unsigned int cpu_arch_flags = CpuUnknownFlags | CpuNo64;
+
+/* If set, conditional jumps are not automatically promoted to handle
+ larger than a byte offset. */
+static unsigned int no_cond_jump_promotion = 0;
+
+/* Pre-defined "_GLOBAL_OFFSET_TABLE_". */
+symbolS *GOT_symbol;
+
+/* The dwarf2 return column, adjusted for 32 or 64 bit. */
+unsigned int x86_dwarf2_return_column;
+
+/* The dwarf2 data alignment, adjusted for 32 or 64 bit. */
+int x86_cie_data_alignment;
/* Interface to relax_segment.
- There are 2 relax states for 386 jump insns: one for conditional &
- one for unconditional jumps. This is because these two types of
- jumps add different sizes to frags when we're figuring out what
- sort of jump to choose to reach a given label. */
+ There are 3 major relax states for 386 jump insns because the
+ different types of jumps add different sizes to frags when we're
+ figuring out what sort of jump to choose to reach a given label. */
/* Types. */
+#define UNCOND_JUMP 0
#define COND_JUMP 1
-#define UNCOND_JUMP 2
+#define COND_JUMP86 2
+
/* Sizes. */
#define CODE16 1
#define SMALL 0
-#define SMALL16 (SMALL|CODE16)
+#define SMALL16 (SMALL | CODE16)
#define BIG 2
-#define BIG16 (BIG|CODE16)
+#define BIG16 (BIG | CODE16)
#ifndef INLINE
#ifdef __GNUC__
#endif
#endif
-#define ENCODE_RELAX_STATE(type,size) \
- ((relax_substateT) ((type<<2) | (size)))
-#define SIZE_FROM_RELAX_STATE(s) \
- ( (((s) & 0x3) == BIG ? 4 : (((s) & 0x3) == BIG16 ? 2 : 1)) )
+#define ENCODE_RELAX_STATE(type, size) \
+ ((relax_substateT) (((type) << 2) | (size)))
+#define TYPE_FROM_RELAX_STATE(s) \
+ ((s) >> 2)
+#define DISP_SIZE_FROM_RELAX_STATE(s) \
+ ((((s) & 3) == BIG ? 4 : (((s) & 3) == BIG16 ? 2 : 1)))
/* This table is used by relax_frag to promote short jumps to long
ones where necessary. SMALL (short) jumps may be promoted to BIG
/* The fields are:
1) most positive reach of this state,
2) most negative reach of this state,
- 3) how many bytes this mode will add to the size of the current frag
+ 3) how many bytes this mode will have in the variable part of the frag
4) which index into the table to try if we can't fit into this one. */
- {1, 1, 0, 0},
- {1, 1, 0, 0},
- {1, 1, 0, 0},
- {1, 1, 0, 0},
-
- {127 + 1, -128 + 1, 0, ENCODE_RELAX_STATE (COND_JUMP, BIG)},
- {127 + 1, -128 + 1, 0, ENCODE_RELAX_STATE (COND_JUMP, BIG16)},
- /* dword conditionals adds 4 bytes to frag:
- 1 extra opcode byte, 3 extra displacement bytes. */
+
+ /* UNCOND_JUMP states. */
+ {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (UNCOND_JUMP, BIG)},
+ {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (UNCOND_JUMP, BIG16)},
+ /* dword jmp adds 4 bytes to frag:
+ 0 extra opcode bytes, 4 displacement bytes. */
{0, 0, 4, 0},
- /* word conditionals add 2 bytes to frag:
- 1 extra opcode byte, 1 extra displacement byte. */
+ /* word jmp adds 2 byte2 to frag:
+ 0 extra opcode bytes, 2 displacement bytes. */
{0, 0, 2, 0},
- {127 + 1, -128 + 1, 0, ENCODE_RELAX_STATE (UNCOND_JUMP, BIG)},
- {127 + 1, -128 + 1, 0, ENCODE_RELAX_STATE (UNCOND_JUMP, BIG16)},
- /* dword jmp adds 3 bytes to frag:
- 0 extra opcode bytes, 3 extra displacement bytes. */
+ /* COND_JUMP states. */
+ {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (COND_JUMP, BIG)},
+ {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (COND_JUMP, BIG16)},
+ /* dword conditionals adds 5 bytes to frag:
+ 1 extra opcode byte, 4 displacement bytes. */
+ {0, 0, 5, 0},
+ /* word conditionals add 3 bytes to frag:
+ 1 extra opcode byte, 2 displacement bytes. */
{0, 0, 3, 0},
- /* word jmp adds 1 byte to frag:
- 0 extra opcode bytes, 1 extra displacement byte. */
- {0, 0, 1, 0}
+ /* COND_JUMP86 states. */
+ {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (COND_JUMP86, BIG)},
+ {127 + 1, -128 + 1, 1, ENCODE_RELAX_STATE (COND_JUMP86, BIG16)},
+ /* dword conditionals adds 5 bytes to frag:
+ 1 extra opcode byte, 4 displacement bytes. */
+ {0, 0, 5, 0},
+ /* word conditionals add 4 bytes to frag:
+ 1 displacement byte and a 3 byte long branch insn. */
+ {0, 0, 4, 0}
};
static const arch_entry cpu_arch[] = {
{"i286", Cpu086|Cpu186|Cpu286 },
{"i386", Cpu086|Cpu186|Cpu286|Cpu386 },
{"i486", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486 },
- {"i586", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|CpuMMX },
- {"i686", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuMMX|CpuSSE },
- {"pentium", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|CpuMMX },
- {"pentiumpro",Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuMMX|CpuSSE },
- {"k6", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|CpuMMX|Cpu3dnow },
- {"athlon", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuMMX|Cpu3dnow },
+ {"i586", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586 },
+ {"i686", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686 },
+ {"pentium", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586 },
+ {"pentiumpro",Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686 },
+ {"pentiumii", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuMMX },
+ {"pentiumiii",Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuMMX|CpuMMX2|CpuSSE },
+ {"pentium4", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuP4|CpuMMX|CpuMMX2|CpuSSE|CpuSSE2 },
+ {"prescott", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuP4|CpuMMX|CpuMMX2|CpuSSE|CpuSSE2|CpuPNI },
+ {"k6", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|CpuK6|CpuMMX },
+ {"k6_2", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|CpuK6|CpuMMX|Cpu3dnow },
+ {"athlon", Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuK6|CpuAthlon|CpuMMX|CpuMMX2|Cpu3dnow|Cpu3dnowA },
+ {"sledgehammer",Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuK6|CpuAthlon|CpuSledgehammer|CpuMMX|CpuMMX2|Cpu3dnow|Cpu3dnowA|CpuSSE|CpuSSE2 },
+ {".mmx", CpuMMX },
+ {".sse", CpuMMX|CpuMMX2|CpuSSE },
+ {".sse2", CpuMMX|CpuMMX2|CpuSSE|CpuSSE2 },
+ {".3dnow", CpuMMX|Cpu3dnow },
+ {".3dnowa", CpuMMX|CpuMMX2|Cpu3dnow|Cpu3dnowA },
+ {".padlock", CpuPadLock },
{NULL, 0 }
};
+const pseudo_typeS md_pseudo_table[] =
+{
+#if !defined(OBJ_AOUT) && !defined(USE_ALIGN_PTWO)
+ {"align", s_align_bytes, 0},
+#else
+ {"align", s_align_ptwo, 0},
+#endif
+ {"arch", set_cpu_arch, 0},
+#ifndef I386COFF
+ {"bss", s_bss, 0},
+#endif
+ {"ffloat", float_cons, 'f'},
+ {"dfloat", float_cons, 'd'},
+ {"tfloat", float_cons, 'x'},
+ {"value", cons, 2},
+ {"noopt", s_ignore, 0},
+ {"optim", s_ignore, 0},
+ {"code16gcc", set_16bit_gcc_code_flag, CODE_16BIT},
+ {"code16", set_code_flag, CODE_16BIT},
+ {"code32", set_code_flag, CODE_32BIT},
+ {"code64", set_code_flag, CODE_64BIT},
+ {"intel_syntax", set_intel_syntax, 1},
+ {"att_syntax", set_intel_syntax, 0},
+ {"file", (void (*) PARAMS ((int))) dwarf2_directive_file, 0},
+ {"loc", dwarf2_directive_loc, 0},
+#ifdef TE_PE
+ {"secrel32", pe_directive_secrel, 0},
+#endif
+ {0, 0, 0}
+};
+
+/* For interface with expression (). */
+extern char *input_line_pointer;
+
+/* Hash table for instruction mnemonic lookup. */
+static struct hash_control *op_hash;
+
+/* Hash table for register lookup. */
+static struct hash_control *reg_hash;
+\f
void
i386_align_code (fragP, count)
fragS *fragP;
f32_15, f32_15, f32_15, f32_15, f32_15, f32_15, f32_15
};
- if (count > 0 && count <= 15)
+ if (count <= 0 || count > 15)
+ return;
+
+ /* The recommended way to pad 64bit code is to use NOPs preceded by
+ maximally four 0x66 prefixes. Balance the size of nops. */
+ if (flag_code == CODE_64BIT)
{
- if (flag_16bit_code)
+ int i;
+ int nnops = (count + 3) / 4;
+ int len = count / nnops;
+ int remains = count - nnops * len;
+ int pos = 0;
+
+ for (i = 0; i < remains; i++)
{
- memcpy (fragP->fr_literal + fragP->fr_fix,
- f16_patt[count - 1], count);
- if (count > 8)
- /* Adjust jump offset. */
- fragP->fr_literal[fragP->fr_fix + 1] = count - 2;
+ memset (fragP->fr_literal + fragP->fr_fix + pos, 0x66, len);
+ fragP->fr_literal[fragP->fr_fix + pos + len] = 0x90;
+ pos += len + 1;
+ }
+ for (; i < nnops; i++)
+ {
+ memset (fragP->fr_literal + fragP->fr_fix + pos, 0x66, len - 1);
+ fragP->fr_literal[fragP->fr_fix + pos + len - 1] = 0x90;
+ pos += len;
}
- else
- memcpy (fragP->fr_literal + fragP->fr_fix,
- f32_patt[count - 1], count);
- fragP->fr_var = count;
}
+ else
+ if (flag_code == CODE_16BIT)
+ {
+ memcpy (fragP->fr_literal + fragP->fr_fix,
+ f16_patt[count - 1], count);
+ if (count > 8)
+ /* Adjust jump offset. */
+ fragP->fr_literal[fragP->fr_fix + 1] = count - 2;
+ }
+ else
+ memcpy (fragP->fr_literal + fragP->fr_fix,
+ f32_patt[count - 1], count);
+ fragP->fr_var = count;
}
-static char *output_invalid PARAMS ((int c));
-static int i386_operand PARAMS ((char *operand_string));
-static int i386_intel_operand PARAMS ((char *operand_string, int got_a_float));
-static const reg_entry *parse_register PARAMS ((char *reg_string,
- char **end_op));
-
-#ifndef I386COFF
-static void s_bss PARAMS ((int));
-#endif
-
-symbolS *GOT_symbol; /* Pre-defined "_GLOBAL_OFFSET_TABLE_". */
-
static INLINE unsigned int
mode_from_disp_size (t)
unsigned int t;
{
- return (t & Disp8) ? 1 : (t & (Disp16 | Disp32)) ? 2 : 0;
+ return (t & Disp8) ? 1 : (t & (Disp16 | Disp32 | Disp32S)) ? 2 : 0;
}
static INLINE int
{
return (-32768 <= num) && (num <= 32767);
}
+static INLINE int
+fits_in_signed_long (num)
+ offsetT num ATTRIBUTE_UNUSED;
+{
+#ifndef BFD64
+ return 1;
+#else
+ return (!(((offsetT) -1 << 31) & num)
+ || (((offsetT) -1 << 31) & num) == ((offsetT) -1 << 31));
+#endif
+} /* fits_in_signed_long() */
+static INLINE int
+fits_in_unsigned_long (num)
+ offsetT num ATTRIBUTE_UNUSED;
+{
+#ifndef BFD64
+ return 1;
+#else
+ return (num & (((offsetT) 2 << 31) - 1)) == num;
+#endif
+} /* fits_in_unsigned_long() */
static int
smallest_imm_type (num)
offsetT num;
{
- if (cpu_arch_flags != 0
- && cpu_arch_flags != (Cpu086 | Cpu186 | Cpu286 | Cpu386 | Cpu486))
+ if (cpu_arch_flags != (Cpu086 | Cpu186 | Cpu286 | Cpu386 | Cpu486 | CpuNo64))
{
/* This code is disabled on the 486 because all the Imm1 forms
in the opcode table are slower on the i486. They're the
displacement, which has another syntax if you really want to
use that form. */
if (num == 1)
- return Imm1 | Imm8 | Imm8S | Imm16 | Imm32;
+ return Imm1 | Imm8 | Imm8S | Imm16 | Imm32 | Imm32S | Imm64;
}
return (fits_in_signed_byte (num)
- ? (Imm8S | Imm8 | Imm16 | Imm32)
+ ? (Imm8S | Imm8 | Imm16 | Imm32 | Imm32S | Imm64)
: fits_in_unsigned_byte (num)
- ? (Imm8 | Imm16 | Imm32)
+ ? (Imm8 | Imm16 | Imm32 | Imm32S | Imm64)
: (fits_in_signed_word (num) || fits_in_unsigned_word (num))
- ? (Imm16 | Imm32)
- : (Imm32));
+ ? (Imm16 | Imm32 | Imm32S | Imm64)
+ : fits_in_signed_long (num)
+ ? (Imm32 | Imm32S | Imm64)
+ : fits_in_unsigned_long (num)
+ ? (Imm32 | Imm64)
+ : Imm64);
}
static offsetT
case 1: mask = ((addressT) 1 << 8) - 1; break;
case 2: mask = ((addressT) 1 << 16) - 1; break;
case 4: mask = ((addressT) 2 << 31) - 1; break;
+#ifdef BFD64
+ case 8: mask = ((addressT) 2 << 63) - 1; break;
+#endif
default: abort ();
}
/* If BFD64, sign extend val. */
- if ((val & ~(((addressT) 2 << 31) - 1)) == 0)
- val = (val ^ ((addressT) 1 << 31)) - ((addressT) 1 << 31);
+ if (!use_rela_relocations)
+ if ((val & ~(((addressT) 2 << 31) - 1)) == 0)
+ val = (val ^ ((addressT) 1 << 31)) - ((addressT) 1 << 31);
if ((val & ~mask) != 0 && (val & ~mask) != ~mask)
{
int ret = 1;
int q;
- switch (prefix)
- {
- default:
- abort ();
+ if (prefix >= REX_OPCODE && prefix < REX_OPCODE + 16
+ && flag_code == CODE_64BIT)
+ q = REX_PREFIX;
+ else
+ switch (prefix)
+ {
+ default:
+ abort ();
- case CS_PREFIX_OPCODE:
- case DS_PREFIX_OPCODE:
- case ES_PREFIX_OPCODE:
- case FS_PREFIX_OPCODE:
- case GS_PREFIX_OPCODE:
- case SS_PREFIX_OPCODE:
- q = SEG_PREFIX;
- break;
+ case CS_PREFIX_OPCODE:
+ case DS_PREFIX_OPCODE:
+ case ES_PREFIX_OPCODE:
+ case FS_PREFIX_OPCODE:
+ case GS_PREFIX_OPCODE:
+ case SS_PREFIX_OPCODE:
+ q = SEG_PREFIX;
+ break;
- case REPNE_PREFIX_OPCODE:
- case REPE_PREFIX_OPCODE:
- ret = 2;
- /* fall thru */
- case LOCK_PREFIX_OPCODE:
- q = LOCKREP_PREFIX;
- break;
+ case REPNE_PREFIX_OPCODE:
+ case REPE_PREFIX_OPCODE:
+ ret = 2;
+ /* fall thru */
+ case LOCK_PREFIX_OPCODE:
+ q = LOCKREP_PREFIX;
+ break;
- case FWAIT_OPCODE:
- q = WAIT_PREFIX;
- break;
+ case FWAIT_OPCODE:
+ q = WAIT_PREFIX;
+ break;
- case ADDR_PREFIX_OPCODE:
- q = ADDR_PREFIX;
- break;
+ case ADDR_PREFIX_OPCODE:
+ q = ADDR_PREFIX;
+ break;
- case DATA_PREFIX_OPCODE:
- q = DATA_PREFIX;
- break;
- }
+ case DATA_PREFIX_OPCODE:
+ q = DATA_PREFIX;
+ break;
+ }
- if (i.prefix[q])
+ if (i.prefix[q] != 0)
{
as_bad (_("same type of prefix used twice"));
return 0;
}
static void
-set_16bit_code_flag (new_16bit_code_flag)
- int new_16bit_code_flag;
+set_code_flag (value)
+ int value;
{
- flag_16bit_code = new_16bit_code_flag;
+ flag_code = value;
+ cpu_arch_flags &= ~(Cpu64 | CpuNo64);
+ cpu_arch_flags |= (flag_code == CODE_64BIT ? Cpu64 : CpuNo64);
+ if (value == CODE_64BIT && !(cpu_arch_flags & CpuSledgehammer))
+ {
+ as_bad (_("64bit mode not supported on this CPU."));
+ }
+ if (value == CODE_32BIT && !(cpu_arch_flags & Cpu386))
+ {
+ as_bad (_("32bit mode not supported on this CPU."));
+ }
stackop_size = '\0';
}
static void
-set_16bit_gcc_code_flag (new_16bit_code_flag)
- int new_16bit_code_flag;
+set_16bit_gcc_code_flag (new_code_flag)
+ int new_code_flag;
{
- flag_16bit_code = new_16bit_code_flag;
- stackop_size = new_16bit_code_flag ? 'l' : '\0';
+ flag_code = new_code_flag;
+ cpu_arch_flags &= ~(Cpu64 | CpuNo64);
+ cpu_arch_flags |= (flag_code == CODE_64BIT ? Cpu64 : CpuNo64);
+ stackop_size = LONG_MNEM_SUFFIX;
}
static void
int ask_naked_reg = 0;
SKIP_WHITESPACE ();
- if (! is_end_of_line[(unsigned char) *input_line_pointer])
+ if (!is_end_of_line[(unsigned char) *input_line_pointer])
{
char *string = input_line_pointer;
int e = get_symbol_end ();
intel_syntax = syntax_flag;
if (ask_naked_reg == 0)
- {
-#ifdef BFD_ASSEMBLER
- allow_naked_reg = (intel_syntax
- && (bfd_get_symbol_leading_char (stdoutput) != '\0'));
-#else
- /* Conservative default. */
- allow_naked_reg = 0;
-#endif
- }
+ allow_naked_reg = (intel_syntax
+ && (bfd_get_symbol_leading_char (stdoutput) != '\0'));
else
allow_naked_reg = (ask_naked_reg < 0);
+
+ identifier_chars['%'] = intel_syntax && allow_naked_reg ? '%' : 0;
+ identifier_chars['$'] = intel_syntax ? '$' : 0;
}
static void
{
SKIP_WHITESPACE ();
- if (! is_end_of_line[(unsigned char) *input_line_pointer])
+ if (!is_end_of_line[(unsigned char) *input_line_pointer])
{
char *string = input_line_pointer;
int e = get_symbol_end ();
{
if (strcmp (string, cpu_arch[i].name) == 0)
{
- cpu_arch_name = cpu_arch[i].name;
- cpu_arch_flags = cpu_arch[i].flags;
- break;
+ if (*string != '.')
+ {
+ cpu_arch_name = cpu_arch[i].name;
+ cpu_sub_arch_name = NULL;
+ cpu_arch_flags = (cpu_arch[i].flags
+ | (flag_code == CODE_64BIT ? Cpu64 : CpuNo64));
+ break;
+ }
+ if ((cpu_arch_flags | cpu_arch[i].flags) != cpu_arch_flags)
+ {
+ cpu_sub_arch_name = cpu_arch[i].name;
+ cpu_arch_flags |= cpu_arch[i].flags;
+ }
+ *input_line_pointer = e;
+ demand_empty_rest_of_line ();
+ return;
}
}
if (!cpu_arch[i].name)
else
as_bad (_("missing cpu architecture"));
- demand_empty_rest_of_line ();
-}
+ no_cond_jump_promotion = 0;
+ if (*input_line_pointer == ','
+ && !is_end_of_line[(unsigned char) input_line_pointer[1]])
+ {
+ char *string = ++input_line_pointer;
+ int e = get_symbol_end ();
-const pseudo_typeS md_pseudo_table[] =
-{
-#if !defined(OBJ_AOUT) && !defined(USE_ALIGN_PTWO)
- {"align", s_align_bytes, 0},
-#else
- {"align", s_align_ptwo, 0},
-#endif
- {"arch", set_cpu_arch, 0},
-#ifndef I386COFF
- {"bss", s_bss, 0},
-#endif
- {"ffloat", float_cons, 'f'},
- {"dfloat", float_cons, 'd'},
- {"tfloat", float_cons, 'x'},
- {"value", cons, 2},
- {"noopt", s_ignore, 0},
- {"optim", s_ignore, 0},
- {"code16gcc", set_16bit_gcc_code_flag, 1},
- {"code16", set_16bit_code_flag, 1},
- {"code32", set_16bit_code_flag, 0},
- {"intel_syntax", set_intel_syntax, 1},
- {"att_syntax", set_intel_syntax, 0},
- {"file", dwarf2_directive_file, 0},
- {"loc", dwarf2_directive_loc, 0},
- {0, 0, 0}
-};
+ if (strcmp (string, "nojumps") == 0)
+ no_cond_jump_promotion = 1;
+ else if (strcmp (string, "jumps") == 0)
+ ;
+ else
+ as_bad (_("no such architecture modifier: `%s'"), string);
-/* For interface with expression (). */
-extern char *input_line_pointer;
+ *input_line_pointer = e;
+ }
-/* Hash table for instruction mnemonic lookup. */
-static struct hash_control *op_hash;
+ demand_empty_rest_of_line ();
+}
-/* Hash table for register lookup. */
-static struct hash_control *reg_hash;
+unsigned long
+i386_mach ()
+{
+ if (!strcmp (default_arch, "x86_64"))
+ return bfd_mach_x86_64;
+ else if (!strcmp (default_arch, "i386"))
+ return bfd_mach_i386_i386;
+ else
+ as_fatal (_("Unknown architecture"));
+}
\f
void
md_begin ()
op_hash = hash_new ();
{
- register const template *optab;
- register templates *core_optab;
+ const template *optab;
+ templates *core_optab;
/* Setup for loop. */
optab = i386_optab;
(PTR) core_optab);
if (hash_err)
{
- hash_error:
as_fatal (_("Internal Error: Can't hash %s: %s"),
(optab - 1)->name,
hash_err);
/* Initialize reg_hash hash table. */
reg_hash = hash_new ();
{
- register const reg_entry *regtab;
+ const reg_entry *regtab;
for (regtab = i386_regtab;
regtab < i386_regtab + sizeof (i386_regtab) / sizeof (i386_regtab[0]);
{
hash_err = hash_insert (reg_hash, regtab->reg_name, (PTR) regtab);
if (hash_err)
- goto hash_error;
+ as_fatal (_("Internal Error: Can't hash %s: %s"),
+ regtab->reg_name,
+ hash_err);
}
}
/* Fill in lexical tables: mnemonic_chars, operand_chars. */
{
- register int c;
- register char *p;
+ int c;
+ char *p;
for (c = 0; c < 256; c++)
{
- if (isdigit (c))
+ if (ISDIGIT (c))
{
digit_chars[c] = c;
mnemonic_chars[c] = c;
register_chars[c] = c;
operand_chars[c] = c;
}
- else if (islower (c))
+ else if (ISLOWER (c))
{
mnemonic_chars[c] = c;
register_chars[c] = c;
operand_chars[c] = c;
}
- else if (isupper (c))
+ else if (ISUPPER (c))
{
- mnemonic_chars[c] = tolower (c);
+ mnemonic_chars[c] = TOLOWER (c);
register_chars[c] = mnemonic_chars[c];
operand_chars[c] = c;
}
- if (isalpha (c) || isdigit (c))
+ if (ISALPHA (c) || ISDIGIT (c))
identifier_chars[c] = c;
else if (c >= 128)
{
#ifdef LEX_AT
identifier_chars['@'] = '@';
+#endif
+#ifdef LEX_QM
+ identifier_chars['?'] = '?';
+ operand_chars['?'] = '?';
#endif
digit_chars['-'] = '-';
identifier_chars['_'] = '_';
record_alignment (bss_section, 2);
}
#endif
+
+ if (flag_code == CODE_64BIT)
+ {
+ x86_dwarf2_return_column = 16;
+ x86_cie_data_alignment = -8;
+ }
+ else
+ {
+ x86_dwarf2_return_column = 8;
+ x86_cie_data_alignment = -4;
+ }
}
void
char *line;
i386_insn *x;
{
- register template *p;
- int i;
+ unsigned int i;
fprintf (stdout, "%s: template ", line);
pte (&x->tm);
- fprintf (stdout, " modrm: mode %x reg %x reg/mem %x",
+ fprintf (stdout, " address: base %s index %s scale %x\n",
+ x->base_reg ? x->base_reg->reg_name : "none",
+ x->index_reg ? x->index_reg->reg_name : "none",
+ x->log2_scale_factor);
+ fprintf (stdout, " modrm: mode %x reg %x reg/mem %x\n",
x->rm.mode, x->rm.reg, x->rm.regmem);
- fprintf (stdout, " base %x index %x scale %x\n",
- x->bi.base, x->bi.index, x->bi.scale);
+ fprintf (stdout, " sib: base %x index %x scale %x\n",
+ x->sib.base, x->sib.index, x->sib.scale);
+ fprintf (stdout, " rex: 64bit %x extX %x extY %x extZ %x\n",
+ (x->rex & REX_MODE64) != 0,
+ (x->rex & REX_EXTX) != 0,
+ (x->rex & REX_EXTY) != 0,
+ (x->rex & REX_EXTZ) != 0);
for (i = 0; i < x->operands; i++)
{
fprintf (stdout, " #%d: ", i + 1);
pte (t)
template *t;
{
- int i;
+ unsigned int i;
fprintf (stdout, " %d operands ", t->operands);
fprintf (stdout, "opcode %x ", t->base_opcode);
if (t->extension_opcode != None)
char *tname;
}
-type_names[] =
+static const type_names[] =
{
{ Reg8, "r8" },
{ Reg16, "r16" },
{ Reg32, "r32" },
+ { Reg64, "r64" },
{ Imm8, "i8" },
{ Imm8S, "i8s" },
{ Imm16, "i16" },
{ Imm32, "i32" },
+ { Imm32S, "i32s" },
+ { Imm64, "i64" },
{ Imm1, "i1" },
{ BaseIndex, "BaseIndex" },
{ Disp8, "d8" },
{ Disp16, "d16" },
{ Disp32, "d32" },
+ { Disp32S, "d32s" },
+ { Disp64, "d64" },
{ InOutPortReg, "InOutPortReg" },
{ ShiftCount, "ShiftCount" },
{ Control, "control reg" },
pt (t)
unsigned int t;
{
- register struct type_name *ty;
+ const struct type_name *ty;
- if (t == Unknown)
- {
- fprintf (stdout, _("Unknown"));
- }
- else
- {
- for (ty = type_names; ty->mask; ty++)
- if (t & ty->mask)
- fprintf (stdout, "%s, ", ty->tname);
- }
+ for (ty = type_names; ty->mask; ty++)
+ if (t & ty->mask)
+ fprintf (stdout, "%s, ", ty->tname);
fflush (stdout);
}
#endif /* DEBUG386 */
\f
-int
-tc_i386_force_relocation (fixp)
- struct fix *fixp;
-{
-#ifdef BFD_ASSEMBLER
- if (fixp->fx_r_type == BFD_RELOC_VTABLE_INHERIT
- || fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
- return 1;
- return 0;
-#else
- /* For COFF. */
- return fixp->fx_r_type == 7;
-#endif
-}
-
-#ifdef BFD_ASSEMBLER
static bfd_reloc_code_real_type reloc
- PARAMS ((int, int, bfd_reloc_code_real_type));
+ PARAMS ((int, int, int, bfd_reloc_code_real_type));
static bfd_reloc_code_real_type
-reloc (size, pcrel, other)
+reloc (size, pcrel, sign, other)
int size;
int pcrel;
+ int sign;
bfd_reloc_code_real_type other;
{
if (other != NO_RELOC)
if (pcrel)
{
+ if (!sign)
+ as_bad (_("There are no unsigned pc-relative relocations"));
switch (size)
{
case 1: return BFD_RELOC_8_PCREL;
}
else
{
- switch (size)
- {
- case 1: return BFD_RELOC_8;
- case 2: return BFD_RELOC_16;
- case 4: return BFD_RELOC_32;
- }
- as_bad (_("can not do %d byte relocation"), size);
+ if (sign)
+ switch (size)
+ {
+ case 4: return BFD_RELOC_X86_64_32S;
+ }
+ else
+ switch (size)
+ {
+ case 1: return BFD_RELOC_8;
+ case 2: return BFD_RELOC_16;
+ case 4: return BFD_RELOC_32;
+ case 8: return BFD_RELOC_64;
+ }
+ as_bad (_("can not do %s %d byte relocation"),
+ sign ? "signed" : "unsigned", size);
}
+ abort ();
return BFD_RELOC_NONE;
}
int
tc_i386_fix_adjustable (fixP)
- fixS *fixP;
+ fixS *fixP ATTRIBUTE_UNUSED;
{
#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
- /* Prevent all adjustments to global symbols, or else dynamic
- linking will not work correctly. */
- if (S_IS_EXTERNAL (fixP->fx_addsy)
- || S_IS_WEAK (fixP->fx_addsy))
+ if (OUTPUT_FLAVOR != bfd_target_elf_flavour)
+ return 1;
+
+ /* Don't adjust pc-relative references to merge sections in 64-bit
+ mode. */
+ if (use_rela_relocations
+ && (S_GET_SEGMENT (fixP->fx_addsy)->flags & SEC_MERGE) != 0
+ && fixP->fx_pcrel)
return 0;
-#endif
+
+ /* The x86_64 GOTPCREL are represented as 32bit PCrel relocations
+ and changed later by validate_fix. */
+ if (GOT_symbol && fixP->fx_subsy == GOT_symbol
+ && fixP->fx_r_type == BFD_RELOC_32_PCREL)
+ return 0;
+
/* adjust_reloc_syms doesn't know about the GOT. */
if (fixP->fx_r_type == BFD_RELOC_386_GOTOFF
|| fixP->fx_r_type == BFD_RELOC_386_PLT32
|| fixP->fx_r_type == BFD_RELOC_386_GOT32
+ || fixP->fx_r_type == BFD_RELOC_386_TLS_GD
+ || fixP->fx_r_type == BFD_RELOC_386_TLS_LDM
+ || fixP->fx_r_type == BFD_RELOC_386_TLS_LDO_32
+ || fixP->fx_r_type == BFD_RELOC_386_TLS_IE_32
+ || fixP->fx_r_type == BFD_RELOC_386_TLS_IE
+ || fixP->fx_r_type == BFD_RELOC_386_TLS_GOTIE
+ || fixP->fx_r_type == BFD_RELOC_386_TLS_LE_32
+ || fixP->fx_r_type == BFD_RELOC_386_TLS_LE
+ || fixP->fx_r_type == BFD_RELOC_X86_64_PLT32
+ || fixP->fx_r_type == BFD_RELOC_X86_64_GOT32
+ || fixP->fx_r_type == BFD_RELOC_X86_64_GOTPCREL
+ || fixP->fx_r_type == BFD_RELOC_X86_64_TLSGD
+ || fixP->fx_r_type == BFD_RELOC_X86_64_TLSLD
+ || fixP->fx_r_type == BFD_RELOC_X86_64_DTPOFF32
+ || fixP->fx_r_type == BFD_RELOC_X86_64_GOTTPOFF
+ || fixP->fx_r_type == BFD_RELOC_X86_64_TPOFF32
|| fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
|| fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
return 0;
+#endif
return 1;
}
-#else
-#define reloc(SIZE,PCREL,OTHER) 0
-#define BFD_RELOC_16 0
-#define BFD_RELOC_32 0
-#define BFD_RELOC_16_PCREL 0
-#define BFD_RELOC_32_PCREL 0
-#define BFD_RELOC_386_PLT32 0
-#define BFD_RELOC_386_GOT32 0
-#define BFD_RELOC_386_GOTOFF 0
-#endif
-static int intel_float_operand PARAMS ((char *mnemonic));
+static int intel_float_operand PARAMS ((const char *mnemonic));
static int
intel_float_operand (mnemonic)
- char *mnemonic;
+ const char *mnemonic;
{
- if (mnemonic[0] == 'f' && mnemonic[1] == 'i')
- return 2;
+ /* Note that the value returned is meaningful only for opcodes with (memory)
+ operands, hence the code here is free to improperly handle opcodes that
+ have no operands (for better performance and smaller code). */
- if (mnemonic[0] == 'f')
- return 1;
+ if (mnemonic[0] != 'f')
+ return 0; /* non-math */
- return 0;
+ switch (mnemonic[1])
+ {
+ /* fclex, fdecstp, fdisi, femms, feni, fincstp, finit, fsetpm, and
+ the fs segment override prefix not currently handled because no
+ call path can make opcodes without operands get here */
+ case 'i':
+ return 2 /* integer op */;
+ case 'l':
+ if (mnemonic[2] == 'd' && (mnemonic[3] == 'c' || mnemonic[3] == 'e'))
+ return 3; /* fldcw/fldenv */
+ break;
+ case 'n':
+ if (mnemonic[2] != 'o' /* fnop */)
+ return 3; /* non-waiting control op */
+ break;
+ case 'r':
+ if (mnemonic[2] == 's')
+ return 3; /* frstor/frstpm */
+ break;
+ case 's':
+ if (mnemonic[2] == 'a')
+ return 3; /* fsave */
+ if (mnemonic[2] == 't')
+ {
+ switch (mnemonic[3])
+ {
+ case 'c': /* fstcw */
+ case 'd': /* fstdw */
+ case 'e': /* fstenv */
+ case 's': /* fsts[gw] */
+ return 3;
+ }
+ }
+ break;
+ case 'x':
+ if (mnemonic[2] == 'r' || mnemonic[2] == 's')
+ return 0; /* fxsave/fxrstor are not really math ops */
+ break;
+ }
+
+ return 1;
}
/* This is the guts of the machine-dependent assembler. LINE points to a
md_assemble (line)
char *line;
{
- /* Points to template once we've found it. */
- const template *t;
-
- /* Count the size of the instruction generated. */
- int insn_size = 0;
-
int j;
-
char mnemonic[MAX_MNEM_SIZE];
/* Initialize globals. */
memset (&i, '\0', sizeof (i));
for (j = 0; j < MAX_OPERANDS; j++)
- i.disp_reloc[j] = NO_RELOC;
+ i.reloc[j] = NO_RELOC;
memset (disp_expressions, '\0', sizeof (disp_expressions));
memset (im_expressions, '\0', sizeof (im_expressions));
save_stack_p = save_stack;
/* First parse an instruction mnemonic & call i386_operand for the operands.
We assume that the scrubber has arranged it so that line[0] is the valid
start of a (possibly prefixed) mnemonic. */
- {
- char *l = line;
- char *token_start = l;
- char *mnem_p;
- /* Non-zero if we found a prefix only acceptable with string insns. */
- const char *expecting_string_instruction = NULL;
+ line = parse_insn (line, mnemonic);
+ if (line == NULL)
+ return;
- while (1)
+ line = parse_operands (line, mnemonic);
+ if (line == NULL)
+ return;
+
+ /* Now we've parsed the mnemonic into a set of templates, and have the
+ operands at hand. */
+
+ /* All intel opcodes have reversed operands except for "bound" and
+ "enter". We also don't reverse intersegment "jmp" and "call"
+ instructions with 2 immediate operands so that the immediate segment
+ precedes the offset, as it does when in AT&T mode. "enter" and the
+ intersegment "jmp" and "call" instructions are the only ones that
+ have two immediate operands. */
+ if (intel_syntax && i.operands > 1
+ && (strcmp (mnemonic, "bound") != 0)
+ && !((i.types[0] & Imm) && (i.types[1] & Imm)))
+ swap_operands ();
+
+ if (i.imm_operands)
+ optimize_imm ();
+
+ if (i.disp_operands)
+ optimize_disp ();
+
+ /* Next, we find a template that matches the given insn,
+ making sure the overlap of the given operands types is consistent
+ with the template operand types. */
+
+ if (!match_template ())
+ return;
+
+ if (intel_syntax)
+ {
+ /* Undo SYSV386_COMPAT brokenness when in Intel mode. See i386.h */
+ if (SYSV386_COMPAT
+ && (i.tm.base_opcode & 0xfffffde0) == 0xdce0)
+ i.tm.base_opcode ^= FloatR;
+
+ /* Zap movzx and movsx suffix. The suffix may have been set from
+ "word ptr" or "byte ptr" on the source operand, but we'll use
+ the suffix later to choose the destination register. */
+ if ((i.tm.base_opcode & ~9) == 0x0fb6)
+ {
+ if (i.reg_operands < 2
+ && !i.suffix
+ && (~i.tm.opcode_modifier
+ & (No_bSuf
+ | No_wSuf
+ | No_lSuf
+ | No_sSuf
+ | No_xSuf
+ | No_qSuf)))
+ as_bad (_("ambiguous operand size for `%s'"), i.tm.name);
+
+ i.suffix = 0;
+ }
+ }
+
+ if (i.tm.opcode_modifier & FWait)
+ if (!add_prefix (FWAIT_OPCODE))
+ return;
+
+ /* Check string instruction segment overrides. */
+ if ((i.tm.opcode_modifier & IsString) != 0 && i.mem_operands != 0)
+ {
+ if (!check_string ())
+ return;
+ }
+
+ if (!process_suffix ())
+ return;
+
+ /* Make still unresolved immediate matches conform to size of immediate
+ given in i.suffix. */
+ if (!finalize_imm ())
+ return;
+
+ if (i.types[0] & Imm1)
+ i.imm_operands = 0; /* kludge for shift insns. */
+ if (i.types[0] & ImplicitRegister)
+ i.reg_operands--;
+ if (i.types[1] & ImplicitRegister)
+ i.reg_operands--;
+ if (i.types[2] & ImplicitRegister)
+ i.reg_operands--;
+
+ if (i.tm.opcode_modifier & ImmExt)
+ {
+ expressionS *exp;
+
+ if ((i.tm.cpu_flags & CpuPNI) && i.operands > 0)
+ {
+ /* These Intel Prescott New Instructions have the fixed
+ operands with an opcode suffix which is coded in the same
+ place as an 8-bit immediate field would be. Here we check
+ those operands and remove them afterwards. */
+ unsigned int x;
+
+ for (x = 0; x < i.operands; x++)
+ if (i.op[x].regs->reg_num != x)
+ as_bad (_("can't use register '%%%s' as operand %d in '%s'."),
+ i.op[x].regs->reg_name, x + 1, i.tm.name);
+ i.operands = 0;
+ }
+
+ /* These AMD 3DNow! and Intel Katmai New Instructions have an
+ opcode suffix which is coded in the same place as an 8-bit
+ immediate field would be. Here we fake an 8-bit immediate
+ operand from the opcode suffix stored in tm.extension_opcode. */
+
+ assert (i.imm_operands == 0 && i.operands <= 2 && 2 < MAX_OPERANDS);
+
+ exp = &im_expressions[i.imm_operands++];
+ i.op[i.operands].imms = exp;
+ i.types[i.operands++] = Imm8;
+ exp->X_op = O_constant;
+ exp->X_add_number = i.tm.extension_opcode;
+ i.tm.extension_opcode = None;
+ }
+
+ /* For insns with operands there are more diddles to do to the opcode. */
+ if (i.operands)
+ {
+ if (!process_operands ())
+ return;
+ }
+ else if (!quiet_warnings && (i.tm.opcode_modifier & Ugh) != 0)
+ {
+ /* UnixWare fsub no args is alias for fsubp, fadd -> faddp, etc. */
+ as_warn (_("translating to `%sp'"), i.tm.name);
+ }
+
+ /* Handle conversion of 'int $3' --> special int3 insn. */
+ if (i.tm.base_opcode == INT_OPCODE && i.op[0].imms->X_add_number == 3)
+ {
+ i.tm.base_opcode = INT3_OPCODE;
+ i.imm_operands = 0;
+ }
+
+ if ((i.tm.opcode_modifier & (Jump | JumpByte | JumpDword))
+ && i.op[0].disps->X_op == O_constant)
+ {
+ /* Convert "jmp constant" (and "call constant") to a jump (call) to
+ the absolute address given by the constant. Since ix86 jumps and
+ calls are pc relative, we need to generate a reloc. */
+ i.op[0].disps->X_add_symbol = &abs_symbol;
+ i.op[0].disps->X_op = O_symbol;
+ }
+
+ if ((i.tm.opcode_modifier & Rex64) != 0)
+ i.rex |= REX_MODE64;
+
+ /* For 8 bit registers we need an empty rex prefix. Also if the
+ instruction already has a prefix, we need to convert old
+ registers to new ones. */
+
+ if (((i.types[0] & Reg8) != 0
+ && (i.op[0].regs->reg_flags & RegRex64) != 0)
+ || ((i.types[1] & Reg8) != 0
+ && (i.op[1].regs->reg_flags & RegRex64) != 0)
+ || (((i.types[0] & Reg8) != 0 || (i.types[1] & Reg8) != 0)
+ && i.rex != 0))
+ {
+ int x;
+
+ i.rex |= REX_OPCODE;
+ for (x = 0; x < 2; x++)
+ {
+ /* Look for 8 bit operand that uses old registers. */
+ if ((i.types[x] & Reg8) != 0
+ && (i.op[x].regs->reg_flags & RegRex64) == 0)
+ {
+ /* In case it is "hi" register, give up. */
+ if (i.op[x].regs->reg_num > 3)
+ as_bad (_("can't encode register '%%%s' in an instruction requiring REX prefix."),
+ i.op[x].regs->reg_name);
+
+ /* Otherwise it is equivalent to the extended register.
+ Since the encoding doesn't change this is merely
+ cosmetic cleanup for debug output. */
+
+ i.op[x].regs = i.op[x].regs + 8;
+ }
+ }
+ }
+
+ if (i.rex != 0)
+ add_prefix (REX_OPCODE | i.rex);
+
+ /* We are ready to output the insn. */
+ output_insn ();
+}
+
+static char *
+parse_insn (line, mnemonic)
+ char *line;
+ char *mnemonic;
+{
+ char *l = line;
+ char *token_start = l;
+ char *mnem_p;
+ int supported;
+ const template *t;
+
+ /* Non-zero if we found a prefix only acceptable with string insns. */
+ const char *expecting_string_instruction = NULL;
+
+ while (1)
+ {
+ mnem_p = mnemonic;
+ while ((*mnem_p = mnemonic_chars[(unsigned char) *l]) != 0)
+ {
+ mnem_p++;
+ if (mnem_p >= mnemonic + MAX_MNEM_SIZE)
+ {
+ as_bad (_("no such instruction: `%s'"), token_start);
+ return NULL;
+ }
+ l++;
+ }
+ if (!is_space_char (*l)
+ && *l != END_OF_INSN
+ && *l != PREFIX_SEPARATOR
+ && *l != ',')
+ {
+ as_bad (_("invalid character %s in mnemonic"),
+ output_invalid (*l));
+ return NULL;
+ }
+ if (token_start == l)
+ {
+ if (*l == PREFIX_SEPARATOR)
+ as_bad (_("expecting prefix; got nothing"));
+ else
+ as_bad (_("expecting mnemonic; got nothing"));
+ return NULL;
+ }
+
+ /* Look up instruction (or prefix) via hash table. */
+ current_templates = hash_find (op_hash, mnemonic);
+
+ if (*l != END_OF_INSN
+ && (!is_space_char (*l) || l[1] != END_OF_INSN)
+ && current_templates
+ && (current_templates->start->opcode_modifier & IsPrefix))
+ {
+ /* If we are in 16-bit mode, do not allow addr16 or data16.
+ Similarly, in 32-bit mode, do not allow addr32 or data32. */
+ if ((current_templates->start->opcode_modifier & (Size16 | Size32))
+ && flag_code != CODE_64BIT
+ && (((current_templates->start->opcode_modifier & Size32) != 0)
+ ^ (flag_code == CODE_16BIT)))
+ {
+ as_bad (_("redundant %s prefix"),
+ current_templates->start->name);
+ return NULL;
+ }
+ /* Add prefix, checking for repeated prefixes. */
+ switch (add_prefix (current_templates->start->base_opcode))
+ {
+ case 0:
+ return NULL;
+ case 2:
+ expecting_string_instruction = current_templates->start->name;
+ break;
+ }
+ /* Skip past PREFIX_SEPARATOR and reset token_start. */
+ token_start = ++l;
+ }
+ else
+ break;
+ }
+
+ if (!current_templates)
+ {
+ /* See if we can get a match by trimming off a suffix. */
+ switch (mnem_p[-1])
+ {
+ case WORD_MNEM_SUFFIX:
+ if (intel_syntax && (intel_float_operand (mnemonic) & 2))
+ i.suffix = SHORT_MNEM_SUFFIX;
+ else
+ case BYTE_MNEM_SUFFIX:
+ case QWORD_MNEM_SUFFIX:
+ i.suffix = mnem_p[-1];
+ mnem_p[-1] = '\0';
+ current_templates = hash_find (op_hash, mnemonic);
+ break;
+ case SHORT_MNEM_SUFFIX:
+ case LONG_MNEM_SUFFIX:
+ if (!intel_syntax)
+ {
+ i.suffix = mnem_p[-1];
+ mnem_p[-1] = '\0';
+ current_templates = hash_find (op_hash, mnemonic);
+ }
+ break;
+
+ /* Intel Syntax. */
+ case 'd':
+ if (intel_syntax)
+ {
+ if (intel_float_operand (mnemonic) == 1)
+ i.suffix = SHORT_MNEM_SUFFIX;
+ else
+ i.suffix = LONG_MNEM_SUFFIX;
+ mnem_p[-1] = '\0';
+ current_templates = hash_find (op_hash, mnemonic);
+ }
+ break;
+ }
+ if (!current_templates)
+ {
+ as_bad (_("no such instruction: `%s'"), token_start);
+ return NULL;
+ }
+ }
+
+ if (current_templates->start->opcode_modifier & (Jump | JumpByte))
+ {
+ /* Check for a branch hint. We allow ",pt" and ",pn" for
+ predict taken and predict not taken respectively.
+ I'm not sure that branch hints actually do anything on loop
+ and jcxz insns (JumpByte) for current Pentium4 chips. They
+ may work in the future and it doesn't hurt to accept them
+ now. */
+ if (l[0] == ',' && l[1] == 'p')
+ {
+ if (l[2] == 't')
+ {
+ if (!add_prefix (DS_PREFIX_OPCODE))
+ return NULL;
+ l += 3;
+ }
+ else if (l[2] == 'n')
+ {
+ if (!add_prefix (CS_PREFIX_OPCODE))
+ return NULL;
+ l += 3;
+ }
+ }
+ }
+ /* Any other comma loses. */
+ if (*l == ',')
+ {
+ as_bad (_("invalid character %s in mnemonic"),
+ output_invalid (*l));
+ return NULL;
+ }
+
+ /* Check if instruction is supported on specified architecture. */
+ supported = 0;
+ for (t = current_templates->start; t < current_templates->end; ++t)
+ {
+ if (!((t->cpu_flags & ~(Cpu64 | CpuNo64))
+ & ~(cpu_arch_flags & ~(Cpu64 | CpuNo64))))
+ supported |= 1;
+ if (!(t->cpu_flags & (flag_code == CODE_64BIT ? CpuNo64 : Cpu64)))
+ supported |= 2;
+ }
+ if (!(supported & 2))
+ {
+ as_bad (flag_code == CODE_64BIT
+ ? _("`%s' is not supported in 64-bit mode")
+ : _("`%s' is only supported in 64-bit mode"),
+ current_templates->start->name);
+ return NULL;
+ }
+ if (!(supported & 1))
+ {
+ as_warn (_("`%s' is not supported on `%s%s'"),
+ current_templates->start->name,
+ cpu_arch_name,
+ cpu_sub_arch_name ? cpu_sub_arch_name : "");
+ }
+ else if ((Cpu386 & ~cpu_arch_flags) && (flag_code != CODE_16BIT))
+ {
+ as_warn (_("use .code16 to ensure correct addressing mode"));
+ }
+
+ /* Check for rep/repne without a string instruction. */
+ if (expecting_string_instruction
+ && !(current_templates->start->opcode_modifier & IsString))
+ {
+ as_bad (_("expecting string instruction after `%s'"),
+ expecting_string_instruction);
+ return NULL;
+ }
+
+ return l;
+}
+
+static char *
+parse_operands (l, mnemonic)
+ char *l;
+ const char *mnemonic;
+{
+ char *token_start;
+
+ /* 1 if operand is pending after ','. */
+ unsigned int expecting_operand = 0;
+
+ /* Non-zero if operand parens not balanced. */
+ unsigned int paren_not_balanced;
+
+ while (*l != END_OF_INSN)
+ {
+ /* Skip optional white space before operand. */
+ if (is_space_char (*l))
+ ++l;
+ if (!is_operand_char (*l) && *l != END_OF_INSN)
+ {
+ as_bad (_("invalid character %s before operand %d"),
+ output_invalid (*l),
+ i.operands + 1);
+ return NULL;
+ }
+ token_start = l; /* after white space */
+ paren_not_balanced = 0;
+ while (paren_not_balanced || *l != ',')
+ {
+ if (*l == END_OF_INSN)
+ {
+ if (paren_not_balanced)
+ {
+ if (!intel_syntax)
+ as_bad (_("unbalanced parenthesis in operand %d."),
+ i.operands + 1);
+ else
+ as_bad (_("unbalanced brackets in operand %d."),
+ i.operands + 1);
+ return NULL;
+ }
+ else
+ break; /* we are done */
+ }
+ else if (!is_operand_char (*l) && !is_space_char (*l))
+ {
+ as_bad (_("invalid character %s in operand %d"),
+ output_invalid (*l),
+ i.operands + 1);
+ return NULL;
+ }
+ if (!intel_syntax)
+ {
+ if (*l == '(')
+ ++paren_not_balanced;
+ if (*l == ')')
+ --paren_not_balanced;
+ }
+ else
+ {
+ if (*l == '[')
+ ++paren_not_balanced;
+ if (*l == ']')
+ --paren_not_balanced;
+ }
+ l++;
+ }
+ if (l != token_start)
+ { /* Yes, we've read in another operand. */
+ unsigned int operand_ok;
+ this_operand = i.operands++;
+ if (i.operands > MAX_OPERANDS)
+ {
+ as_bad (_("spurious operands; (%d operands/instruction max)"),
+ MAX_OPERANDS);
+ return NULL;
+ }
+ /* Now parse operand adding info to 'i' as we go along. */
+ END_STRING_AND_SAVE (l);
+
+ if (intel_syntax)
+ operand_ok =
+ i386_intel_operand (token_start,
+ intel_float_operand (mnemonic));
+ else
+ operand_ok = i386_operand (token_start);
+
+ RESTORE_END_STRING (l);
+ if (!operand_ok)
+ return NULL;
+ }
+ else
+ {
+ if (expecting_operand)
+ {
+ expecting_operand_after_comma:
+ as_bad (_("expecting operand after ','; got nothing"));
+ return NULL;
+ }
+ if (*l == ',')
+ {
+ as_bad (_("expecting operand before ','; got nothing"));
+ return NULL;
+ }
+ }
+
+ /* Now *l must be either ',' or END_OF_INSN. */
+ if (*l == ',')
+ {
+ if (*++l == END_OF_INSN)
+ {
+ /* Just skip it, if it's \n complain. */
+ goto expecting_operand_after_comma;
+ }
+ expecting_operand = 1;
+ }
+ }
+ return l;
+}
+
+static void
+swap_operands ()
+{
+ union i386_op temp_op;
+ unsigned int temp_type;
+ enum bfd_reloc_code_real temp_reloc;
+ int xchg1 = 0;
+ int xchg2 = 0;
+
+ if (i.operands == 2)
+ {
+ xchg1 = 0;
+ xchg2 = 1;
+ }
+ else if (i.operands == 3)
+ {
+ xchg1 = 0;
+ xchg2 = 2;
+ }
+ temp_type = i.types[xchg2];
+ i.types[xchg2] = i.types[xchg1];
+ i.types[xchg1] = temp_type;
+ temp_op = i.op[xchg2];
+ i.op[xchg2] = i.op[xchg1];
+ i.op[xchg1] = temp_op;
+ temp_reloc = i.reloc[xchg2];
+ i.reloc[xchg2] = i.reloc[xchg1];
+ i.reloc[xchg1] = temp_reloc;
+
+ if (i.mem_operands == 2)
+ {
+ const seg_entry *temp_seg;
+ temp_seg = i.seg[0];
+ i.seg[0] = i.seg[1];
+ i.seg[1] = temp_seg;
+ }
+}
+
+/* Try to ensure constant immediates are represented in the smallest
+ opcode possible. */
+static void
+optimize_imm ()
+{
+ char guess_suffix = 0;
+ int op;
+
+ if (i.suffix)
+ guess_suffix = i.suffix;
+ else if (i.reg_operands)
+ {
+ /* Figure out a suffix from the last register operand specified.
+ We can't do this properly yet, ie. excluding InOutPortReg,
+ but the following works for instructions with immediates.
+ In any case, we can't set i.suffix yet. */
+ for (op = i.operands; --op >= 0;)
+ if (i.types[op] & Reg)
+ {
+ if (i.types[op] & Reg8)
+ guess_suffix = BYTE_MNEM_SUFFIX;
+ else if (i.types[op] & Reg16)
+ guess_suffix = WORD_MNEM_SUFFIX;
+ else if (i.types[op] & Reg32)
+ guess_suffix = LONG_MNEM_SUFFIX;
+ else if (i.types[op] & Reg64)
+ guess_suffix = QWORD_MNEM_SUFFIX;
+ break;
+ }
+ }
+ else if ((flag_code == CODE_16BIT) ^ (i.prefix[DATA_PREFIX] != 0))
+ guess_suffix = WORD_MNEM_SUFFIX;
+
+ for (op = i.operands; --op >= 0;)
+ if (i.types[op] & Imm)
{
- mnem_p = mnemonic;
- while ((*mnem_p = mnemonic_chars[(unsigned char) *l]) != 0)
+ switch (i.op[op].imms->X_op)
{
- mnem_p++;
- if (mnem_p >= mnemonic + sizeof (mnemonic))
+ case O_constant:
+ /* If a suffix is given, this operand may be shortened. */
+ switch (guess_suffix)
+ {
+ case LONG_MNEM_SUFFIX:
+ i.types[op] |= Imm32 | Imm64;
+ break;
+ case WORD_MNEM_SUFFIX:
+ i.types[op] |= Imm16 | Imm32S | Imm32 | Imm64;
+ break;
+ case BYTE_MNEM_SUFFIX:
+ i.types[op] |= Imm16 | Imm8 | Imm8S | Imm32S | Imm32 | Imm64;
+ break;
+ }
+
+ /* If this operand is at most 16 bits, convert it
+ to a signed 16 bit number before trying to see
+ whether it will fit in an even smaller size.
+ This allows a 16-bit operand such as $0xffe0 to
+ be recognised as within Imm8S range. */
+ if ((i.types[op] & Imm16)
+ && (i.op[op].imms->X_add_number & ~(offsetT) 0xffff) == 0)
+ {
+ i.op[op].imms->X_add_number =
+ (((i.op[op].imms->X_add_number & 0xffff) ^ 0x8000) - 0x8000);
+ }
+ if ((i.types[op] & Imm32)
+ && ((i.op[op].imms->X_add_number & ~(((offsetT) 2 << 31) - 1))
+ == 0))
+ {
+ i.op[op].imms->X_add_number = ((i.op[op].imms->X_add_number
+ ^ ((offsetT) 1 << 31))
+ - ((offsetT) 1 << 31));
+ }
+ i.types[op] |= smallest_imm_type (i.op[op].imms->X_add_number);
+
+ /* We must avoid matching of Imm32 templates when 64bit
+ only immediate is available. */
+ if (guess_suffix == QWORD_MNEM_SUFFIX)
+ i.types[op] &= ~Imm32;
+ break;
+
+ case O_absent:
+ case O_register:
+ abort ();
+
+ /* Symbols and expressions. */
+ default:
+ /* Convert symbolic operand to proper sizes for matching. */
+ switch (guess_suffix)
{
- as_bad (_("no such instruction: `%s'"), token_start);
- return;
+ case QWORD_MNEM_SUFFIX:
+ i.types[op] = Imm64 | Imm32S;
+ break;
+ case LONG_MNEM_SUFFIX:
+ i.types[op] = Imm32;
+ break;
+ case WORD_MNEM_SUFFIX:
+ i.types[op] = Imm16;
+ break;
+ case BYTE_MNEM_SUFFIX:
+ i.types[op] = Imm8 | Imm8S;
+ break;
}
- l++;
+ break;
}
- if (!is_space_char (*l)
- && *l != END_OF_INSN
- && *l != PREFIX_SEPARATOR)
+ }
+}
+
+/* Try to use the smallest displacement type too. */
+static void
+optimize_disp ()
+{
+ int op;
+
+ for (op = i.operands; --op >= 0;)
+ if ((i.types[op] & Disp) && i.op[op].disps->X_op == O_constant)
+ {
+ offsetT disp = i.op[op].disps->X_add_number;
+
+ if (i.types[op] & Disp16)
+ {
+ /* We know this operand is at most 16 bits, so
+ convert to a signed 16 bit number before trying
+ to see whether it will fit in an even smaller
+ size. */
+
+ disp = (((disp & 0xffff) ^ 0x8000) - 0x8000);
+ }
+ else if (i.types[op] & Disp32)
{
- as_bad (_("invalid character %s in mnemonic"),
- output_invalid (*l));
- return;
+ /* We know this operand is at most 32 bits, so convert to a
+ signed 32 bit number before trying to see whether it will
+ fit in an even smaller size. */
+ disp &= (((offsetT) 2 << 31) - 1);
+ disp = (disp ^ ((offsetT) 1 << 31)) - ((addressT) 1 << 31);
}
- if (token_start == l)
+ if (flag_code == CODE_64BIT)
{
- if (*l == PREFIX_SEPARATOR)
- as_bad (_("expecting prefix; got nothing"));
- else
- as_bad (_("expecting mnemonic; got nothing"));
- return;
+ if (fits_in_signed_long (disp))
+ i.types[op] |= Disp32S;
+ if (fits_in_unsigned_long (disp))
+ i.types[op] |= Disp32;
}
+ if ((i.types[op] & (Disp32 | Disp32S | Disp16))
+ && fits_in_signed_byte (disp))
+ i.types[op] |= Disp8;
+ }
+}
+
+static int
+match_template ()
+{
+ /* Points to template once we've found it. */
+ const template *t;
+ unsigned int overlap0, overlap1, overlap2;
+ unsigned int found_reverse_match;
+ int suffix_check;
+
+#define MATCH(overlap, given, template) \
+ ((overlap & ~JumpAbsolute) \
+ && (((given) & (BaseIndex | JumpAbsolute)) \
+ == ((overlap) & (BaseIndex | JumpAbsolute))))
+
+ /* If given types r0 and r1 are registers they must be of the same type
+ unless the expected operand type register overlap is null.
+ Note that Acc in a template matches every size of reg. */
+#define CONSISTENT_REGISTER_MATCH(m0, g0, t0, m1, g1, t1) \
+ (((g0) & Reg) == 0 || ((g1) & Reg) == 0 \
+ || ((g0) & Reg) == ((g1) & Reg) \
+ || ((((m0) & Acc) ? Reg : (t0)) & (((m1) & Acc) ? Reg : (t1)) & Reg) == 0 )
+
+ overlap0 = 0;
+ overlap1 = 0;
+ overlap2 = 0;
+ found_reverse_match = 0;
+ suffix_check = (i.suffix == BYTE_MNEM_SUFFIX
+ ? No_bSuf
+ : (i.suffix == WORD_MNEM_SUFFIX
+ ? No_wSuf
+ : (i.suffix == SHORT_MNEM_SUFFIX
+ ? No_sSuf
+ : (i.suffix == LONG_MNEM_SUFFIX
+ ? No_lSuf
+ : (i.suffix == QWORD_MNEM_SUFFIX
+ ? No_qSuf
+ : (i.suffix == LONG_DOUBLE_MNEM_SUFFIX
+ ? No_xSuf : 0))))));
+
+ t = current_templates->start;
+ if (i.suffix == QWORD_MNEM_SUFFIX
+ && flag_code != CODE_64BIT
+ && (intel_syntax
+ ? !(t->opcode_modifier & IgnoreSize)
+ && !intel_float_operand (t->name)
+ : intel_float_operand (t->name) != 2)
+ && (!(t->operand_types[0] & (RegMMX | RegXMM))
+ || !(t->operand_types[t->operands > 1] & (RegMMX | RegXMM)))
+ && (t->base_opcode != 0x0fc7
+ || t->extension_opcode != 1 /* cmpxchg8b */))
+ t = current_templates->end;
+ for (; t < current_templates->end; t++)
+ {
+ /* Must have right number of operands. */
+ if (i.operands != t->operands)
+ continue;
+
+ /* Check the suffix, except for some instructions in intel mode. */
+ if ((t->opcode_modifier & suffix_check)
+ && !(intel_syntax
+ && (t->opcode_modifier & IgnoreSize)))
+ continue;
+
+ /* Do not verify operands when there are none. */
+ else if (!t->operands)
+ {
+ if (t->cpu_flags & ~cpu_arch_flags)
+ continue;
+ /* We've found a match; break out of loop. */
+ break;
+ }
+
+ overlap0 = i.types[0] & t->operand_types[0];
+ switch (t->operands)
+ {
+ case 1:
+ if (!MATCH (overlap0, i.types[0], t->operand_types[0]))
+ continue;
+ break;
+ case 2:
+ case 3:
+ overlap1 = i.types[1] & t->operand_types[1];
+ if (!MATCH (overlap0, i.types[0], t->operand_types[0])
+ || !MATCH (overlap1, i.types[1], t->operand_types[1])
+ || !CONSISTENT_REGISTER_MATCH (overlap0, i.types[0],
+ t->operand_types[0],
+ overlap1, i.types[1],
+ t->operand_types[1]))
+ {
+ /* Check if other direction is valid ... */
+ if ((t->opcode_modifier & (D | FloatD)) == 0)
+ continue;
+
+ /* Try reversing direction of operands. */
+ overlap0 = i.types[0] & t->operand_types[1];
+ overlap1 = i.types[1] & t->operand_types[0];
+ if (!MATCH (overlap0, i.types[0], t->operand_types[1])
+ || !MATCH (overlap1, i.types[1], t->operand_types[0])
+ || !CONSISTENT_REGISTER_MATCH (overlap0, i.types[0],
+ t->operand_types[1],
+ overlap1, i.types[1],
+ t->operand_types[0]))
+ {
+ /* Does not match either direction. */
+ continue;
+ }
+ /* found_reverse_match holds which of D or FloatDR
+ we've found. */
+ found_reverse_match = t->opcode_modifier & (D | FloatDR);
+ }
+ /* Found a forward 2 operand match here. */
+ else if (t->operands == 3)
+ {
+ /* Here we make use of the fact that there are no
+ reverse match 3 operand instructions, and all 3
+ operand instructions only need to be checked for
+ register consistency between operands 2 and 3. */
+ overlap2 = i.types[2] & t->operand_types[2];
+ if (!MATCH (overlap2, i.types[2], t->operand_types[2])
+ || !CONSISTENT_REGISTER_MATCH (overlap1, i.types[1],
+ t->operand_types[1],
+ overlap2, i.types[2],
+ t->operand_types[2]))
+
+ continue;
+ }
+ /* Found either forward/reverse 2 or 3 operand match here:
+ slip through to break. */
+ }
+ if (t->cpu_flags & ~cpu_arch_flags)
+ {
+ found_reverse_match = 0;
+ continue;
+ }
+ /* We've found a match; break out of loop. */
+ break;
+ }
+
+ if (t == current_templates->end)
+ {
+ /* We found no match. */
+ as_bad (_("suffix or operands invalid for `%s'"),
+ current_templates->start->name);
+ return 0;
+ }
+
+ if (!quiet_warnings)
+ {
+ if (!intel_syntax
+ && ((i.types[0] & JumpAbsolute)
+ != (t->operand_types[0] & JumpAbsolute)))
+ {
+ as_warn (_("indirect %s without `*'"), t->name);
+ }
+
+ if ((t->opcode_modifier & (IsPrefix | IgnoreSize))
+ == (IsPrefix | IgnoreSize))
+ {
+ /* Warn them that a data or address size prefix doesn't
+ affect assembly of the next line of code. */
+ as_warn (_("stand-alone `%s' prefix"), t->name);
+ }
+ }
+
+ /* Copy the template we found. */
+ i.tm = *t;
+ if (found_reverse_match)
+ {
+ /* If we found a reverse match we must alter the opcode
+ direction bit. found_reverse_match holds bits to change
+ (different for int & float insns). */
+
+ i.tm.base_opcode ^= found_reverse_match;
+
+ i.tm.operand_types[0] = t->operand_types[1];
+ i.tm.operand_types[1] = t->operand_types[0];
+ }
+
+ return 1;
+}
+
+static int
+check_string ()
+{
+ int mem_op = (i.types[0] & AnyMem) ? 0 : 1;
+ if ((i.tm.operand_types[mem_op] & EsSeg) != 0)
+ {
+ if (i.seg[0] != NULL && i.seg[0] != &es)
+ {
+ as_bad (_("`%s' operand %d must use `%%es' segment"),
+ i.tm.name,
+ mem_op + 1);
+ return 0;
+ }
+ /* There's only ever one segment override allowed per instruction.
+ This instruction possibly has a legal segment override on the
+ second operand, so copy the segment to where non-string
+ instructions store it, allowing common code. */
+ i.seg[0] = i.seg[1];
+ }
+ else if ((i.tm.operand_types[mem_op + 1] & EsSeg) != 0)
+ {
+ if (i.seg[1] != NULL && i.seg[1] != &es)
+ {
+ as_bad (_("`%s' operand %d must use `%%es' segment"),
+ i.tm.name,
+ mem_op + 2);
+ return 0;
+ }
+ }
+ return 1;
+}
+
+static int
+process_suffix (void)
+{
+ /* If matched instruction specifies an explicit instruction mnemonic
+ suffix, use it. */
+ if (i.tm.opcode_modifier & (Size16 | Size32 | Size64))
+ {
+ if (i.tm.opcode_modifier & Size16)
+ i.suffix = WORD_MNEM_SUFFIX;
+ else if (i.tm.opcode_modifier & Size64)
+ i.suffix = QWORD_MNEM_SUFFIX;
+ else
+ i.suffix = LONG_MNEM_SUFFIX;
+ }
+ else if (i.reg_operands)
+ {
+ /* If there's no instruction mnemonic suffix we try to invent one
+ based on register operands. */
+ if (!i.suffix)
+ {
+ /* We take i.suffix from the last register operand specified,
+ Destination register type is more significant than source
+ register type. */
+ int op;
+
+ for (op = i.operands; --op >= 0;)
+ if ((i.types[op] & Reg)
+ && !(i.tm.operand_types[op] & InOutPortReg))
+ {
+ i.suffix = ((i.types[op] & Reg8) ? BYTE_MNEM_SUFFIX :
+ (i.types[op] & Reg16) ? WORD_MNEM_SUFFIX :
+ (i.types[op] & Reg64) ? QWORD_MNEM_SUFFIX :
+ LONG_MNEM_SUFFIX);
+ break;
+ }
+ }
+ else if (i.suffix == BYTE_MNEM_SUFFIX)
+ {
+ if (!check_byte_reg ())
+ return 0;
+ }
+ else if (i.suffix == LONG_MNEM_SUFFIX)
+ {
+ if (!check_long_reg ())
+ return 0;
+ }
+ else if (i.suffix == QWORD_MNEM_SUFFIX)
+ {
+ if (!check_qword_reg ())
+ return 0;
+ }
+ else if (i.suffix == WORD_MNEM_SUFFIX)
+ {
+ if (!check_word_reg ())
+ return 0;
+ }
+ else if (intel_syntax && (i.tm.opcode_modifier & IgnoreSize))
+ /* Do nothing if the instruction is going to ignore the prefix. */
+ ;
+ else
+ abort ();
+ }
+ else if ((i.tm.opcode_modifier & DefaultSize)
+ && !i.suffix
+ /* exclude fldenv/frstor/fsave/fstenv */
+ && (i.tm.opcode_modifier & No_sSuf))
+ {
+ i.suffix = stackop_size;
+ }
+ else if (intel_syntax
+ && !i.suffix
+ && ((i.tm.operand_types[0] & JumpAbsolute)
+ || (i.tm.opcode_modifier & (JumpByte|JumpInterSegment))
+ || (i.tm.base_opcode == 0x0f01 /* [ls][gi]dt */
+ && i.tm.extension_opcode <= 3)))
+ {
+ switch (flag_code)
+ {
+ case CODE_64BIT:
+ if (!(i.tm.opcode_modifier & No_qSuf))
+ {
+ i.suffix = QWORD_MNEM_SUFFIX;
+ break;
+ }
+ case CODE_32BIT:
+ if (!(i.tm.opcode_modifier & No_lSuf))
+ i.suffix = LONG_MNEM_SUFFIX;
+ break;
+ case CODE_16BIT:
+ if (!(i.tm.opcode_modifier & No_wSuf))
+ i.suffix = WORD_MNEM_SUFFIX;
+ break;
+ }
+ }
+
+ if (!i.suffix)
+ {
+ if (!intel_syntax)
+ {
+ if (i.tm.opcode_modifier & W)
+ {
+ as_bad (_("no instruction mnemonic suffix given and no register operands; can't size instruction"));
+ return 0;
+ }
+ }
+ else
+ {
+ unsigned int suffixes = ~i.tm.opcode_modifier
+ & (No_bSuf
+ | No_wSuf
+ | No_lSuf
+ | No_sSuf
+ | No_xSuf
+ | No_qSuf);
+
+ if ((i.tm.opcode_modifier & W)
+ || ((suffixes & (suffixes - 1))
+ && !(i.tm.opcode_modifier & (DefaultSize | IgnoreSize))))
+ {
+ as_bad (_("ambiguous operand size for `%s'"), i.tm.name);
+ return 0;
+ }
+ }
+ }
+
+ /* Change the opcode based on the operand size given by i.suffix;
+ We don't need to change things for byte insns. */
+
+ if (i.suffix && i.suffix != BYTE_MNEM_SUFFIX)
+ {
+ /* It's not a byte, select word/dword operation. */
+ if (i.tm.opcode_modifier & W)
+ {
+ if (i.tm.opcode_modifier & ShortForm)
+ i.tm.base_opcode |= 8;
+ else
+ i.tm.base_opcode |= 1;
+ }
+
+ /* Now select between word & dword operations via the operand
+ size prefix, except for instructions that will ignore this
+ prefix anyway. */
+ if (i.suffix != QWORD_MNEM_SUFFIX
+ && i.suffix != LONG_DOUBLE_MNEM_SUFFIX
+ && !(i.tm.opcode_modifier & (IgnoreSize | FloatMF))
+ && ((i.suffix == LONG_MNEM_SUFFIX) == (flag_code == CODE_16BIT)
+ || (flag_code == CODE_64BIT
+ && (i.tm.opcode_modifier & JumpByte))))
+ {
+ unsigned int prefix = DATA_PREFIX_OPCODE;
+
+ if (i.tm.opcode_modifier & JumpByte) /* jcxz, loop */
+ prefix = ADDR_PREFIX_OPCODE;
+
+ if (!add_prefix (prefix))
+ return 0;
+ }
+
+ /* Set mode64 for an operand. */
+ if (i.suffix == QWORD_MNEM_SUFFIX
+ && flag_code == CODE_64BIT
+ && (i.tm.opcode_modifier & NoRex64) == 0)
+ i.rex |= REX_MODE64;
+
+ /* Size floating point instruction. */
+ if (i.suffix == LONG_MNEM_SUFFIX)
+ if (i.tm.opcode_modifier & FloatMF)
+ i.tm.base_opcode ^= 4;
+ }
+
+ return 1;
+}
+
+static int
+check_byte_reg (void)
+{
+ int op;
+
+ for (op = i.operands; --op >= 0;)
+ {
+ /* If this is an eight bit register, it's OK. If it's the 16 or
+ 32 bit version of an eight bit register, we will just use the
+ low portion, and that's OK too. */
+ if (i.types[op] & Reg8)
+ continue;
+
+ /* movzx and movsx should not generate this warning. */
+ if (intel_syntax
+ && (i.tm.base_opcode == 0xfb7
+ || i.tm.base_opcode == 0xfb6
+ || i.tm.base_opcode == 0x63
+ || i.tm.base_opcode == 0xfbe
+ || i.tm.base_opcode == 0xfbf))
+ continue;
+
+ if ((i.types[op] & WordReg) && i.op[op].regs->reg_num < 4)
+ {
+ /* Prohibit these changes in the 64bit mode, since the
+ lowering is more complicated. */
+ if (flag_code == CODE_64BIT
+ && (i.tm.operand_types[op] & InOutPortReg) == 0)
+ {
+ as_bad (_("Incorrect register `%%%s' used with `%c' suffix"),
+ i.op[op].regs->reg_name,
+ i.suffix);
+ return 0;
+ }
+#if REGISTER_WARNINGS
+ if (!quiet_warnings
+ && (i.tm.operand_types[op] & InOutPortReg) == 0)
+ as_warn (_("using `%%%s' instead of `%%%s' due to `%c' suffix"),
+ (i.op[op].regs + (i.types[op] & Reg16
+ ? REGNAM_AL - REGNAM_AX
+ : REGNAM_AL - REGNAM_EAX))->reg_name,
+ i.op[op].regs->reg_name,
+ i.suffix);
+#endif
+ continue;
+ }
+ /* Any other register is bad. */
+ if (i.types[op] & (Reg | RegMMX | RegXMM
+ | SReg2 | SReg3
+ | Control | Debug | Test
+ | FloatReg | FloatAcc))
+ {
+ as_bad (_("`%%%s' not allowed with `%s%c'"),
+ i.op[op].regs->reg_name,
+ i.tm.name,
+ i.suffix);
+ return 0;
+ }
+ }
+ return 1;
+}
- /* Look up instruction (or prefix) via hash table. */
- current_templates = hash_find (op_hash, mnemonic);
+static int
+check_long_reg ()
+{
+ int op;
- if (*l != END_OF_INSN
- && (! is_space_char (*l) || l[1] != END_OF_INSN)
- && current_templates
- && (current_templates->start->opcode_modifier & IsPrefix))
+ for (op = i.operands; --op >= 0;)
+ /* Reject eight bit registers, except where the template requires
+ them. (eg. movzb) */
+ if ((i.types[op] & Reg8) != 0
+ && (i.tm.operand_types[op] & (Reg16 | Reg32 | Acc)) != 0)
+ {
+ as_bad (_("`%%%s' not allowed with `%s%c'"),
+ i.op[op].regs->reg_name,
+ i.tm.name,
+ i.suffix);
+ return 0;
+ }
+ /* Warn if the e prefix on a general reg is missing. */
+ else if ((!quiet_warnings || flag_code == CODE_64BIT)
+ && (i.types[op] & Reg16) != 0
+ && (i.tm.operand_types[op] & (Reg32 | Acc)) != 0)
+ {
+ /* Prohibit these changes in the 64bit mode, since the
+ lowering is more complicated. */
+ if (flag_code == CODE_64BIT)
{
- /* If we are in 16-bit mode, do not allow addr16 or data16.
- Similarly, in 32-bit mode, do not allow addr32 or data32. */
- if ((current_templates->start->opcode_modifier & (Size16 | Size32))
- && (((current_templates->start->opcode_modifier & Size32) != 0)
- ^ flag_16bit_code))
- {
- as_bad (_("redundant %s prefix"),
- current_templates->start->name);
- return;
- }
- /* Add prefix, checking for repeated prefixes. */
- switch (add_prefix (current_templates->start->base_opcode))
- {
- case 0:
- return;
- case 2:
- expecting_string_instruction = current_templates->start->name;
- break;
- }
- /* Skip past PREFIX_SEPARATOR and reset token_start. */
- token_start = ++l;
+ as_bad (_("Incorrect register `%%%s' used with `%c' suffix"),
+ i.op[op].regs->reg_name,
+ i.suffix);
+ return 0;
}
+#if REGISTER_WARNINGS
else
- break;
+ as_warn (_("using `%%%s' instead of `%%%s' due to `%c' suffix"),
+ (i.op[op].regs + REGNAM_EAX - REGNAM_AX)->reg_name,
+ i.op[op].regs->reg_name,
+ i.suffix);
+#endif
}
-
- if (!current_templates)
+ /* Warn if the r prefix on a general reg is missing. */
+ else if ((i.types[op] & Reg64) != 0
+ && (i.tm.operand_types[op] & (Reg32 | Acc)) != 0)
{
- /* See if we can get a match by trimming off a suffix. */
- switch (mnem_p[-1])
- {
- case WORD_MNEM_SUFFIX:
- case BYTE_MNEM_SUFFIX:
- case SHORT_MNEM_SUFFIX:
- case LONG_MNEM_SUFFIX:
- i.suffix = mnem_p[-1];
- mnem_p[-1] = '\0';
- current_templates = hash_find (op_hash, mnemonic);
- break;
+ as_bad (_("Incorrect register `%%%s' used with `%c' suffix"),
+ i.op[op].regs->reg_name,
+ i.suffix);
+ return 0;
+ }
+ return 1;
+}
- /* Intel Syntax. */
- case DWORD_MNEM_SUFFIX:
- if (intel_syntax)
- {
- i.suffix = mnem_p[-1];
- mnem_p[-1] = '\0';
- current_templates = hash_find (op_hash, mnemonic);
- break;
- }
- }
- if (!current_templates)
- {
- as_bad (_("no such instruction: `%s'"), token_start);
- return;
- }
+static int
+check_qword_reg ()
+{
+ int op;
+
+ for (op = i.operands; --op >= 0; )
+ /* Reject eight bit registers, except where the template requires
+ them. (eg. movzb) */
+ if ((i.types[op] & Reg8) != 0
+ && (i.tm.operand_types[op] & (Reg16 | Reg32 | Acc)) != 0)
+ {
+ as_bad (_("`%%%s' not allowed with `%s%c'"),
+ i.op[op].regs->reg_name,
+ i.tm.name,
+ i.suffix);
+ return 0;
+ }
+ /* Warn if the e prefix on a general reg is missing. */
+ else if (((i.types[op] & Reg16) != 0
+ || (i.types[op] & Reg32) != 0)
+ && (i.tm.operand_types[op] & (Reg32 | Acc)) != 0)
+ {
+ /* Prohibit these changes in the 64bit mode, since the
+ lowering is more complicated. */
+ as_bad (_("Incorrect register `%%%s' used with `%c' suffix"),
+ i.op[op].regs->reg_name,
+ i.suffix);
+ return 0;
}
+ return 1;
+}
- /* Check if instruction is supported on specified architecture. */
- if (cpu_arch_flags != 0)
+static int
+check_word_reg ()
+{
+ int op;
+ for (op = i.operands; --op >= 0;)
+ /* Reject eight bit registers, except where the template requires
+ them. (eg. movzb) */
+ if ((i.types[op] & Reg8) != 0
+ && (i.tm.operand_types[op] & (Reg16 | Reg32 | Acc)) != 0)
{
- if (current_templates->start->cpu_flags & ~cpu_arch_flags)
- {
- as_warn (_("`%s' is not supported on `%s'"),
- current_templates->start->name, cpu_arch_name);
- }
- else if ((Cpu386 & ~cpu_arch_flags) && !flag_16bit_code)
+ as_bad (_("`%%%s' not allowed with `%s%c'"),
+ i.op[op].regs->reg_name,
+ i.tm.name,
+ i.suffix);
+ return 0;
+ }
+ /* Warn if the e prefix on a general reg is present. */
+ else if ((!quiet_warnings || flag_code == CODE_64BIT)
+ && (i.types[op] & Reg32) != 0
+ && (i.tm.operand_types[op] & (Reg16 | Acc)) != 0)
+ {
+ /* Prohibit these changes in the 64bit mode, since the
+ lowering is more complicated. */
+ if (flag_code == CODE_64BIT)
{
- as_warn (_("use .code16 to ensure correct addressing mode"));
+ as_bad (_("Incorrect register `%%%s' used with `%c' suffix"),
+ i.op[op].regs->reg_name,
+ i.suffix);
+ return 0;
}
+ else
+#if REGISTER_WARNINGS
+ as_warn (_("using `%%%s' instead of `%%%s' due to `%c' suffix"),
+ (i.op[op].regs + REGNAM_AX - REGNAM_EAX)->reg_name,
+ i.op[op].regs->reg_name,
+ i.suffix);
+#endif
}
+ return 1;
+}
- /* Check for rep/repne without a string instruction. */
- if (expecting_string_instruction
- && !(current_templates->start->opcode_modifier & IsString))
- {
- as_bad (_("expecting string instruction after `%s'"),
- expecting_string_instruction);
- return;
- }
+static int
+finalize_imm ()
+{
+ unsigned int overlap0, overlap1, overlap2;
- /* There may be operands to parse. */
- if (*l != END_OF_INSN)
- {
- /* 1 if operand is pending after ','. */
- unsigned int expecting_operand = 0;
+ overlap0 = i.types[0] & i.tm.operand_types[0];
+ if ((overlap0 & (Imm8 | Imm8S | Imm16 | Imm32 | Imm32S | Imm64))
+ && overlap0 != Imm8 && overlap0 != Imm8S
+ && overlap0 != Imm16 && overlap0 != Imm32S
+ && overlap0 != Imm32 && overlap0 != Imm64)
+ {
+ if (i.suffix)
+ {
+ overlap0 &= (i.suffix == BYTE_MNEM_SUFFIX
+ ? Imm8 | Imm8S
+ : (i.suffix == WORD_MNEM_SUFFIX
+ ? Imm16
+ : (i.suffix == QWORD_MNEM_SUFFIX
+ ? Imm64 | Imm32S
+ : Imm32)));
+ }
+ else if (overlap0 == (Imm16 | Imm32S | Imm32)
+ || overlap0 == (Imm16 | Imm32)
+ || overlap0 == (Imm16 | Imm32S))
+ {
+ overlap0 = ((flag_code == CODE_16BIT) ^ (i.prefix[DATA_PREFIX] != 0)
+ ? Imm16 : Imm32S);
+ }
+ if (overlap0 != Imm8 && overlap0 != Imm8S
+ && overlap0 != Imm16 && overlap0 != Imm32S
+ && overlap0 != Imm32 && overlap0 != Imm64)
+ {
+ as_bad (_("no instruction mnemonic suffix given; can't determine immediate size"));
+ return 0;
+ }
+ }
+ i.types[0] = overlap0;
- /* Non-zero if operand parens not balanced. */
- unsigned int paren_not_balanced;
+ overlap1 = i.types[1] & i.tm.operand_types[1];
+ if ((overlap1 & (Imm8 | Imm8S | Imm16 | Imm32S | Imm32 | Imm64))
+ && overlap1 != Imm8 && overlap1 != Imm8S
+ && overlap1 != Imm16 && overlap1 != Imm32S
+ && overlap1 != Imm32 && overlap1 != Imm64)
+ {
+ if (i.suffix)
+ {
+ overlap1 &= (i.suffix == BYTE_MNEM_SUFFIX
+ ? Imm8 | Imm8S
+ : (i.suffix == WORD_MNEM_SUFFIX
+ ? Imm16
+ : (i.suffix == QWORD_MNEM_SUFFIX
+ ? Imm64 | Imm32S
+ : Imm32)));
+ }
+ else if (overlap1 == (Imm16 | Imm32 | Imm32S)
+ || overlap1 == (Imm16 | Imm32)
+ || overlap1 == (Imm16 | Imm32S))
+ {
+ overlap1 = ((flag_code == CODE_16BIT) ^ (i.prefix[DATA_PREFIX] != 0)
+ ? Imm16 : Imm32S);
+ }
+ if (overlap1 != Imm8 && overlap1 != Imm8S
+ && overlap1 != Imm16 && overlap1 != Imm32S
+ && overlap1 != Imm32 && overlap1 != Imm64)
+ {
+ as_bad (_("no instruction mnemonic suffix given; can't determine immediate size %x %c"),overlap1, i.suffix);
+ return 0;
+ }
+ }
+ i.types[1] = overlap1;
- do
- {
- /* Skip optional white space before operand. */
- if (is_space_char (*l))
- ++l;
- if (!is_operand_char (*l) && *l != END_OF_INSN)
- {
- as_bad (_("invalid character %s before operand %d"),
- output_invalid (*l),
- i.operands + 1);
- return;
- }
- token_start = l; /* after white space */
- paren_not_balanced = 0;
- while (paren_not_balanced || *l != ',')
- {
- if (*l == END_OF_INSN)
- {
- if (paren_not_balanced)
- {
- if (!intel_syntax)
- as_bad (_("unbalanced parenthesis in operand %d."),
- i.operands + 1);
- else
- as_bad (_("unbalanced brackets in operand %d."),
- i.operands + 1);
- return;
- }
- else
- break; /* we are done */
- }
- else if (!is_operand_char (*l) && !is_space_char (*l))
- {
- as_bad (_("invalid character %s in operand %d"),
- output_invalid (*l),
- i.operands + 1);
- return;
- }
- if (!intel_syntax)
- {
- if (*l == '(')
- ++paren_not_balanced;
- if (*l == ')')
- --paren_not_balanced;
- }
- else
- {
- if (*l == '[')
- ++paren_not_balanced;
- if (*l == ']')
- --paren_not_balanced;
- }
- l++;
- }
- if (l != token_start)
- { /* Yes, we've read in another operand. */
- unsigned int operand_ok;
- this_operand = i.operands++;
- if (i.operands > MAX_OPERANDS)
- {
- as_bad (_("spurious operands; (%d operands/instruction max)"),
- MAX_OPERANDS);
- return;
- }
- /* Now parse operand adding info to 'i' as we go along. */
- END_STRING_AND_SAVE (l);
-
- if (intel_syntax)
- operand_ok =
- i386_intel_operand (token_start,
- intel_float_operand (mnemonic));
- else
- operand_ok = i386_operand (token_start);
-
- RESTORE_END_STRING (l);
- if (!operand_ok)
- return;
- }
- else
- {
- if (expecting_operand)
- {
- expecting_operand_after_comma:
- as_bad (_("expecting operand after ','; got nothing"));
- return;
- }
- if (*l == ',')
- {
- as_bad (_("expecting operand before ','; got nothing"));
- return;
- }
- }
+ overlap2 = i.types[2] & i.tm.operand_types[2];
+ assert ((overlap2 & Imm) == 0);
+ i.types[2] = overlap2;
- /* Now *l must be either ',' or END_OF_INSN. */
- if (*l == ',')
- {
- if (*++l == END_OF_INSN)
- {
- /* Just skip it, if it's \n complain. */
- goto expecting_operand_after_comma;
- }
- expecting_operand = 1;
- }
- }
- while (*l != END_OF_INSN);
- }
- }
+ return 1;
+}
- /* Now we've parsed the mnemonic into a set of templates, and have the
- operands at hand.
+static int
+process_operands ()
+{
+ /* Default segment register this instruction will use for memory
+ accesses. 0 means unknown. This is only for optimizing out
+ unnecessary segment overrides. */
+ const seg_entry *default_seg = 0;
+
+ /* The imul $imm, %reg instruction is converted into
+ imul $imm, %reg, %reg, and the clr %reg instruction
+ is converted into xor %reg, %reg. */
+ if (i.tm.opcode_modifier & regKludge)
+ {
+ unsigned int first_reg_op = (i.types[0] & Reg) ? 0 : 1;
+ /* Pretend we saw the extra register operand. */
+ assert (i.op[first_reg_op + 1].regs == 0);
+ i.op[first_reg_op + 1].regs = i.op[first_reg_op].regs;
+ i.types[first_reg_op + 1] = i.types[first_reg_op];
+ i.reg_operands = 2;
+ }
- Next, we find a template that matches the given insn,
- making sure the overlap of the given operands types is consistent
- with the template operand types. */
+ if (i.tm.opcode_modifier & ShortForm)
+ {
+ /* The register or float register operand is in operand 0 or 1. */
+ unsigned int op = (i.types[0] & (Reg | FloatReg)) ? 0 : 1;
+ /* Register goes in low 3 bits of opcode. */
+ i.tm.base_opcode |= i.op[op].regs->reg_num;
+ if ((i.op[op].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_EXTZ;
+ if (!quiet_warnings && (i.tm.opcode_modifier & Ugh) != 0)
+ {
+ /* Warn about some common errors, but press on regardless.
+ The first case can be generated by gcc (<= 2.8.1). */
+ if (i.operands == 2)
+ {
+ /* Reversed arguments on faddp, fsubp, etc. */
+ as_warn (_("translating to `%s %%%s,%%%s'"), i.tm.name,
+ i.op[1].regs->reg_name,
+ i.op[0].regs->reg_name);
+ }
+ else
+ {
+ /* Extraneous `l' suffix on fp insn. */
+ as_warn (_("translating to `%s %%%s'"), i.tm.name,
+ i.op[0].regs->reg_name);
+ }
+ }
+ }
+ else if (i.tm.opcode_modifier & Modrm)
+ {
+ /* The opcode is completed (modulo i.tm.extension_opcode which
+ must be put into the modrm byte). Now, we make the modrm and
+ index base bytes based on all the info we've collected. */
-#define MATCH(overlap, given, template) \
- ((overlap & ~JumpAbsolute) \
- && ((given) & (BaseIndex|JumpAbsolute)) == ((overlap) & (BaseIndex|JumpAbsolute)))
+ default_seg = build_modrm_byte ();
+ }
+ else if (i.tm.opcode_modifier & (Seg2ShortForm | Seg3ShortForm))
+ {
+ if (i.tm.base_opcode == POP_SEG_SHORT
+ && i.op[0].regs->reg_num == 1)
+ {
+ as_bad (_("you can't `pop %%cs'"));
+ return 0;
+ }
+ i.tm.base_opcode |= (i.op[0].regs->reg_num << 3);
+ if ((i.op[0].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_EXTZ;
+ }
+ else if ((i.tm.base_opcode & ~(D | W)) == MOV_AX_DISP32)
+ {
+ default_seg = &ds;
+ }
+ else if ((i.tm.opcode_modifier & IsString) != 0)
+ {
+ /* For the string instructions that allow a segment override
+ on one of their operands, the default segment is ds. */
+ default_seg = &ds;
+ }
- /* If given types r0 and r1 are registers they must be of the same type
- unless the expected operand type register overlap is null.
- Note that Acc in a template matches every size of reg. */
-#define CONSISTENT_REGISTER_MATCH(m0, g0, t0, m1, g1, t1) \
- ( ((g0) & Reg) == 0 || ((g1) & Reg) == 0 || \
- ((g0) & Reg) == ((g1) & Reg) || \
- ((((m0) & Acc) ? Reg : (t0)) & (((m1) & Acc) ? Reg : (t1)) & Reg) == 0 )
+ if (i.tm.base_opcode == 0x8d /* lea */ && i.seg[0] && !quiet_warnings)
+ as_warn (_("segment override on `lea' is ineffectual"));
- {
- register unsigned int overlap0, overlap1;
- unsigned int overlap2;
- unsigned int found_reverse_match;
- int suffix_check;
-
- /* All intel opcodes have reversed operands except for "bound" and
- "enter". We also don't reverse intersegment "jmp" and "call"
- instructions with 2 immediate operands so that the immediate segment
- precedes the offset, as it does when in AT&T mode. "enter" and the
- intersegment "jmp" and "call" instructions are the only ones that
- have two immediate operands. */
- if (intel_syntax && i.operands > 1
- && (strcmp (mnemonic, "bound") != 0)
- && !((i.types[0] & Imm) && (i.types[1] & Imm)))
- {
- union i386_op temp_op;
- unsigned int temp_type;
-#ifdef BFD_ASSEMBLER
- enum bfd_reloc_code_real temp_disp_reloc;
-#else
- int temp_disp_reloc;
-#endif
- int xchg1 = 0;
- int xchg2 = 0;
+ /* If a segment was explicitly specified, and the specified segment
+ is not the default, use an opcode prefix to select it. If we
+ never figured out what the default segment is, then default_seg
+ will be zero at this point, and the specified segment prefix will
+ always be used. */
+ if ((i.seg[0]) && (i.seg[0] != default_seg))
+ {
+ if (!add_prefix (i.seg[0]->seg_prefix))
+ return 0;
+ }
+ return 1;
+}
- if (i.operands == 2)
- {
- xchg1 = 0;
- xchg2 = 1;
- }
- else if (i.operands == 3)
- {
- xchg1 = 0;
- xchg2 = 2;
- }
- temp_type = i.types[xchg2];
- i.types[xchg2] = i.types[xchg1];
- i.types[xchg1] = temp_type;
- temp_op = i.op[xchg2];
- i.op[xchg2] = i.op[xchg1];
- i.op[xchg1] = temp_op;
- temp_disp_reloc = i.disp_reloc[xchg2];
- i.disp_reloc[xchg2] = i.disp_reloc[xchg1];
- i.disp_reloc[xchg1] = temp_disp_reloc;
-
- if (i.mem_operands == 2)
- {
- const seg_entry *temp_seg;
- temp_seg = i.seg[0];
- i.seg[0] = i.seg[1];
- i.seg[1] = temp_seg;
- }
- }
+static const seg_entry *
+build_modrm_byte ()
+{
+ const seg_entry *default_seg = 0;
- if (i.imm_operands)
- {
- /* Try to ensure constant immediates are represented in the smallest
- opcode possible. */
- char guess_suffix = 0;
- int op;
-
- if (i.suffix)
- guess_suffix = i.suffix;
- else if (i.reg_operands)
- {
- /* Figure out a suffix from the last register operand specified.
- We can't do this properly yet, ie. excluding InOutPortReg,
- but the following works for instructions with immediates.
- In any case, we can't set i.suffix yet. */
- for (op = i.operands; --op >= 0;)
- if (i.types[op] & Reg)
+ /* i.reg_operands MUST be the number of real register operands;
+ implicit registers do not count. */
+ if (i.reg_operands == 2)
+ {
+ unsigned int source, dest;
+ source = ((i.types[0]
+ & (Reg | RegMMX | RegXMM
+ | SReg2 | SReg3
+ | Control | Debug | Test))
+ ? 0 : 1);
+ dest = source + 1;
+
+ i.rm.mode = 3;
+ /* One of the register operands will be encoded in the i.tm.reg
+ field, the other in the combined i.tm.mode and i.tm.regmem
+ fields. If no form of this instruction supports a memory
+ destination operand, then we assume the source operand may
+ sometimes be a memory operand and so we need to store the
+ destination in the i.rm.reg field. */
+ if ((i.tm.operand_types[dest] & AnyMem) == 0)
+ {
+ i.rm.reg = i.op[dest].regs->reg_num;
+ i.rm.regmem = i.op[source].regs->reg_num;
+ if ((i.op[dest].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_EXTX;
+ if ((i.op[source].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_EXTZ;
+ }
+ else
+ {
+ i.rm.reg = i.op[source].regs->reg_num;
+ i.rm.regmem = i.op[dest].regs->reg_num;
+ if ((i.op[dest].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_EXTZ;
+ if ((i.op[source].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_EXTX;
+ }
+ }
+ else
+ { /* If it's not 2 reg operands... */
+ if (i.mem_operands)
+ {
+ unsigned int fake_zero_displacement = 0;
+ unsigned int op = ((i.types[0] & AnyMem)
+ ? 0
+ : (i.types[1] & AnyMem) ? 1 : 2);
+
+ default_seg = &ds;
+
+ if (i.base_reg == 0)
+ {
+ i.rm.mode = 0;
+ if (!i.disp_operands)
+ fake_zero_displacement = 1;
+ if (i.index_reg == 0)
{
- if (i.types[op] & Reg8)
- guess_suffix = BYTE_MNEM_SUFFIX;
- else if (i.types[op] & Reg16)
- guess_suffix = WORD_MNEM_SUFFIX;
- break;
+ /* Operand is just <disp> */
+ if (flag_code == CODE_64BIT)
+ {
+ /* 64bit mode overwrites the 32bit absolute
+ addressing by RIP relative addressing and
+ absolute addressing is encoded by one of the
+ redundant SIB forms. */
+ i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING;
+ i.sib.base = NO_BASE_REGISTER;
+ i.sib.index = NO_INDEX_REGISTER;
+ i.types[op] = ((i.prefix[ADDR_PREFIX] == 0) ? Disp32S : Disp32);
+ }
+ else if ((flag_code == CODE_16BIT) ^ (i.prefix[ADDR_PREFIX] != 0))
+ {
+ i.rm.regmem = NO_BASE_REGISTER_16;
+ i.types[op] = Disp16;
+ }
+ else
+ {
+ i.rm.regmem = NO_BASE_REGISTER;
+ i.types[op] = Disp32;
+ }
}
- }
- else if (flag_16bit_code ^ (i.prefix[DATA_PREFIX] != 0))
- guess_suffix = WORD_MNEM_SUFFIX;
-
- for (op = i.operands; --op >= 0;)
- if ((i.types[op] & Imm)
- && i.op[op].imms->X_op == O_constant)
+ else /* !i.base_reg && i.index_reg */
+ {
+ i.sib.index = i.index_reg->reg_num;
+ i.sib.base = NO_BASE_REGISTER;
+ i.sib.scale = i.log2_scale_factor;
+ i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING;
+ i.types[op] &= ~Disp;
+ if (flag_code != CODE_64BIT)
+ i.types[op] |= Disp32; /* Must be 32 bit */
+ else
+ i.types[op] |= Disp32S;
+ if ((i.index_reg->reg_flags & RegRex) != 0)
+ i.rex |= REX_EXTY;
+ }
+ }
+ /* RIP addressing for 64bit mode. */
+ else if (i.base_reg->reg_type == BaseIndex)
{
- /* If a suffix is given, this operand may be shortened. */
- switch (guess_suffix)
+ i.rm.regmem = NO_BASE_REGISTER;
+ i.types[op] &= ~ Disp;
+ i.types[op] |= Disp32S;
+ i.flags[op] = Operand_PCrel;
+ if (! i.disp_operands)
+ fake_zero_displacement = 1;
+ }
+ else if (i.base_reg->reg_type & Reg16)
+ {
+ switch (i.base_reg->reg_num)
{
- case WORD_MNEM_SUFFIX:
- i.types[op] |= Imm16;
+ case 3: /* (%bx) */
+ if (i.index_reg == 0)
+ i.rm.regmem = 7;
+ else /* (%bx,%si) -> 0, or (%bx,%di) -> 1 */
+ i.rm.regmem = i.index_reg->reg_num - 6;
break;
- case BYTE_MNEM_SUFFIX:
- i.types[op] |= Imm16 | Imm8 | Imm8S;
+ case 5: /* (%bp) */
+ default_seg = &ss;
+ if (i.index_reg == 0)
+ {
+ i.rm.regmem = 6;
+ if ((i.types[op] & Disp) == 0)
+ {
+ /* fake (%bp) into 0(%bp) */
+ i.types[op] |= Disp8;
+ fake_zero_displacement = 1;
+ }
+ }
+ else /* (%bp,%si) -> 2, or (%bp,%di) -> 3 */
+ i.rm.regmem = i.index_reg->reg_num - 6 + 2;
break;
+ default: /* (%si) -> 4 or (%di) -> 5 */
+ i.rm.regmem = i.base_reg->reg_num - 6 + 4;
}
-
- /* If this operand is at most 16 bits, convert it to a
- signed 16 bit number before trying to see whether it will
- fit in an even smaller size. This allows a 16-bit operand
- such as $0xffe0 to be recognised as within Imm8S range. */
- if ((i.types[op] & Imm16)
- && (i.op[op].imms->X_add_number & ~(offsetT)0xffff) == 0)
+ i.rm.mode = mode_from_disp_size (i.types[op]);
+ }
+ else /* i.base_reg and 32/64 bit mode */
+ {
+ if (flag_code == CODE_64BIT
+ && (i.types[op] & Disp))
+ i.types[op] = (i.types[op] & Disp8) | (i.prefix[ADDR_PREFIX] == 0 ? Disp32S : Disp32);
+
+ i.rm.regmem = i.base_reg->reg_num;
+ if ((i.base_reg->reg_flags & RegRex) != 0)
+ i.rex |= REX_EXTZ;
+ i.sib.base = i.base_reg->reg_num;
+ /* x86-64 ignores REX prefix bit here to avoid decoder
+ complications. */
+ if ((i.base_reg->reg_num & 7) == EBP_REG_NUM)
+ {
+ default_seg = &ss;
+ if (i.disp_operands == 0)
+ {
+ fake_zero_displacement = 1;
+ i.types[op] |= Disp8;
+ }
+ }
+ else if (i.base_reg->reg_num == ESP_REG_NUM)
+ {
+ default_seg = &ss;
+ }
+ i.sib.scale = i.log2_scale_factor;
+ if (i.index_reg == 0)
+ {
+ /* <disp>(%esp) becomes two byte modrm with no index
+ register. We've already stored the code for esp
+ in i.rm.regmem ie. ESCAPE_TO_TWO_BYTE_ADDRESSING.
+ Any base register besides %esp will not use the
+ extra modrm byte. */
+ i.sib.index = NO_INDEX_REGISTER;
+#if !SCALE1_WHEN_NO_INDEX
+ /* Another case where we force the second modrm byte. */
+ if (i.log2_scale_factor)
+ i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING;
+#endif
+ }
+ else
{
- i.op[op].imms->X_add_number =
- (((i.op[op].imms->X_add_number & 0xffff) ^ 0x8000) - 0x8000);
+ i.sib.index = i.index_reg->reg_num;
+ i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING;
+ if ((i.index_reg->reg_flags & RegRex) != 0)
+ i.rex |= REX_EXTY;
}
- i.types[op] |= smallest_imm_type ((long) i.op[op].imms->X_add_number);
+ i.rm.mode = mode_from_disp_size (i.types[op]);
}
- }
- if (i.disp_operands)
- {
- /* Try to use the smallest displacement type too. */
- int op;
+ if (fake_zero_displacement)
+ {
+ /* Fakes a zero displacement assuming that i.types[op]
+ holds the correct displacement size. */
+ expressionS *exp;
+
+ assert (i.op[op].disps == 0);
+ exp = &disp_expressions[i.disp_operands++];
+ i.op[op].disps = exp;
+ exp->X_op = O_constant;
+ exp->X_add_number = 0;
+ exp->X_add_symbol = (symbolS *) 0;
+ exp->X_op_symbol = (symbolS *) 0;
+ }
+ }
- for (op = i.operands; --op >= 0;)
- if ((i.types[op] & Disp)
- && i.op[op].imms->X_op == O_constant)
+ /* Fill in i.rm.reg or i.rm.regmem field with register operand
+ (if any) based on i.tm.extension_opcode. Again, we must be
+ careful to make sure that segment/control/debug/test/MMX
+ registers are coded into the i.rm.reg field. */
+ if (i.reg_operands)
+ {
+ unsigned int op =
+ ((i.types[0]
+ & (Reg | RegMMX | RegXMM
+ | SReg2 | SReg3
+ | Control | Debug | Test))
+ ? 0
+ : ((i.types[1]
+ & (Reg | RegMMX | RegXMM
+ | SReg2 | SReg3
+ | Control | Debug | Test))
+ ? 1
+ : 2));
+ /* If there is an extension opcode to put here, the register
+ number must be put into the regmem field. */
+ if (i.tm.extension_opcode != None)
+ {
+ i.rm.regmem = i.op[op].regs->reg_num;
+ if ((i.op[op].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_EXTZ;
+ }
+ else
{
- offsetT disp = i.op[op].disps->X_add_number;
+ i.rm.reg = i.op[op].regs->reg_num;
+ if ((i.op[op].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_EXTX;
+ }
- if (i.types[op] & Disp16)
- {
- /* We know this operand is at most 16 bits, so
- convert to a signed 16 bit number before trying
- to see whether it will fit in an even smaller
- size. */
+ /* Now, if no memory operand has set i.rm.mode = 0, 1, 2 we
+ must set it to 3 to indicate this is a register operand
+ in the regmem field. */
+ if (!i.mem_operands)
+ i.rm.mode = 3;
+ }
- disp = (((disp & 0xffff) ^ 0x8000) - 0x8000);
- }
- if (fits_in_signed_byte (disp))
- i.types[op] |= Disp8;
- }
- }
+ /* Fill in i.rm.reg field with extension opcode (if any). */
+ if (i.tm.extension_opcode != None)
+ i.rm.reg = i.tm.extension_opcode;
+ }
+ return default_seg;
+}
- overlap0 = 0;
- overlap1 = 0;
- overlap2 = 0;
- found_reverse_match = 0;
- suffix_check = (i.suffix == BYTE_MNEM_SUFFIX
- ? No_bSuf
- : (i.suffix == WORD_MNEM_SUFFIX
- ? No_wSuf
- : (i.suffix == SHORT_MNEM_SUFFIX
- ? No_sSuf
- : (i.suffix == LONG_MNEM_SUFFIX
- ? No_lSuf
- : (i.suffix == DWORD_MNEM_SUFFIX
- ? No_dSuf
- : (i.suffix == LONG_DOUBLE_MNEM_SUFFIX ? No_xSuf : 0))))));
-
- for (t = current_templates->start;
- t < current_templates->end;
- t++)
- {
- /* Must have right number of operands. */
- if (i.operands != t->operands)
- continue;
+static void
+output_branch ()
+{
+ char *p;
+ int code16;
+ int prefix;
+ relax_substateT subtype;
+ symbolS *sym;
+ offsetT off;
+
+ code16 = 0;
+ if (flag_code == CODE_16BIT)
+ code16 = CODE16;
+
+ prefix = 0;
+ if (i.prefix[DATA_PREFIX] != 0)
+ {
+ prefix = 1;
+ i.prefixes -= 1;
+ code16 ^= CODE16;
+ }
+ /* Pentium4 branch hints. */
+ if (i.prefix[SEG_PREFIX] == CS_PREFIX_OPCODE /* not taken */
+ || i.prefix[SEG_PREFIX] == DS_PREFIX_OPCODE /* taken */)
+ {
+ prefix++;
+ i.prefixes--;
+ }
+ if (i.prefix[REX_PREFIX] != 0)
+ {
+ prefix++;
+ i.prefixes--;
+ }
- /* Check the suffix, except for some instructions in intel mode. */
- if ((t->opcode_modifier & suffix_check)
- && !(intel_syntax
- && (t->opcode_modifier & IgnoreSize))
- && !(intel_syntax
- && t->base_opcode == 0xd9
- && (t->extension_opcode == 5 /* 0xd9,5 "fldcw" */
- || t->extension_opcode == 7))) /* 0xd9,7 "f{n}stcw" */
- continue;
+ if (i.prefixes != 0 && !intel_syntax)
+ as_warn (_("skipping prefixes on this instruction"));
+
+ /* It's always a symbol; End frag & setup for relax.
+ Make sure there is enough room in this frag for the largest
+ instruction we may generate in md_convert_frag. This is 2
+ bytes for the opcode and room for the prefix and largest
+ displacement. */
+ frag_grow (prefix + 2 + 4);
+ /* Prefix and 1 opcode byte go in fr_fix. */
+ p = frag_more (prefix + 1);
+ if (i.prefix[DATA_PREFIX] != 0)
+ *p++ = DATA_PREFIX_OPCODE;
+ if (i.prefix[SEG_PREFIX] == CS_PREFIX_OPCODE
+ || i.prefix[SEG_PREFIX] == DS_PREFIX_OPCODE)
+ *p++ = i.prefix[SEG_PREFIX];
+ if (i.prefix[REX_PREFIX] != 0)
+ *p++ = i.prefix[REX_PREFIX];
+ *p = i.tm.base_opcode;
+
+ if ((unsigned char) *p == JUMP_PC_RELATIVE)
+ subtype = ENCODE_RELAX_STATE (UNCOND_JUMP, SMALL);
+ else if ((cpu_arch_flags & Cpu386) != 0)
+ subtype = ENCODE_RELAX_STATE (COND_JUMP, SMALL);
+ else
+ subtype = ENCODE_RELAX_STATE (COND_JUMP86, SMALL);
+ subtype |= code16;
- else if (!t->operands)
- /* 0 operands always matches. */
- break;
+ sym = i.op[0].disps->X_add_symbol;
+ off = i.op[0].disps->X_add_number;
- overlap0 = i.types[0] & t->operand_types[0];
- switch (t->operands)
- {
- case 1:
- if (!MATCH (overlap0, i.types[0], t->operand_types[0]))
- continue;
- break;
- case 2:
- case 3:
- overlap1 = i.types[1] & t->operand_types[1];
- if (!MATCH (overlap0, i.types[0], t->operand_types[0])
- || !MATCH (overlap1, i.types[1], t->operand_types[1])
- || !CONSISTENT_REGISTER_MATCH (overlap0, i.types[0],
- t->operand_types[0],
- overlap1, i.types[1],
- t->operand_types[1]))
- {
- /* Check if other direction is valid ... */
- if ((t->opcode_modifier & (D|FloatD)) == 0)
- continue;
+ if (i.op[0].disps->X_op != O_constant
+ && i.op[0].disps->X_op != O_symbol)
+ {
+ /* Handle complex expressions. */
+ sym = make_expr_symbol (i.op[0].disps);
+ off = 0;
+ }
- /* Try reversing direction of operands. */
- overlap0 = i.types[0] & t->operand_types[1];
- overlap1 = i.types[1] & t->operand_types[0];
- if (!MATCH (overlap0, i.types[0], t->operand_types[1])
- || !MATCH (overlap1, i.types[1], t->operand_types[0])
- || !CONSISTENT_REGISTER_MATCH (overlap0, i.types[0],
- t->operand_types[1],
- overlap1, i.types[1],
- t->operand_types[0]))
- {
- /* Does not match either direction. */
- continue;
- }
- /* found_reverse_match holds which of D or FloatDR
- we've found. */
- found_reverse_match = t->opcode_modifier & (D|FloatDR);
- break;
- }
- /* Found a forward 2 operand match here. */
- if (t->operands == 3)
- {
- /* Here we make use of the fact that there are no
- reverse match 3 operand instructions, and all 3
- operand instructions only need to be checked for
- register consistency between operands 2 and 3. */
- overlap2 = i.types[2] & t->operand_types[2];
- if (!MATCH (overlap2, i.types[2], t->operand_types[2])
- || !CONSISTENT_REGISTER_MATCH (overlap1, i.types[1],
- t->operand_types[1],
- overlap2, i.types[2],
- t->operand_types[2]))
+ /* 1 possible extra opcode + 4 byte displacement go in var part.
+ Pass reloc in fr_var. */
+ frag_var (rs_machine_dependent, 5, i.reloc[0], subtype, sym, off, p);
+}
- continue;
- }
- /* Found either forward/reverse 2 or 3 operand match here:
- slip through to break. */
- }
- /* We've found a match; break out of loop. */
- break;
- }
- if (t == current_templates->end)
- {
- /* We found no match. */
- as_bad (_("suffix or operands invalid for `%s'"),
- current_templates->start->name);
- return;
- }
+static void
+output_jump ()
+{
+ char *p;
+ int size;
+ fixS *fixP;
- if (!quiet_warnings)
- {
- if (!intel_syntax
- && ((i.types[0] & JumpAbsolute)
- != (t->operand_types[0] & JumpAbsolute)))
- {
- as_warn (_("indirect %s without `*'"), t->name);
- }
+ if (i.tm.opcode_modifier & JumpByte)
+ {
+ /* This is a loop or jecxz type instruction. */
+ size = 1;
+ if (i.prefix[ADDR_PREFIX] != 0)
+ {
+ FRAG_APPEND_1_CHAR (ADDR_PREFIX_OPCODE);
+ i.prefixes -= 1;
+ }
+ /* Pentium4 branch hints. */
+ if (i.prefix[SEG_PREFIX] == CS_PREFIX_OPCODE /* not taken */
+ || i.prefix[SEG_PREFIX] == DS_PREFIX_OPCODE /* taken */)
+ {
+ FRAG_APPEND_1_CHAR (i.prefix[SEG_PREFIX]);
+ i.prefixes--;
+ }
+ }
+ else
+ {
+ int code16;
+
+ code16 = 0;
+ if (flag_code == CODE_16BIT)
+ code16 = CODE16;
- if ((t->opcode_modifier & (IsPrefix|IgnoreSize))
- == (IsPrefix|IgnoreSize))
- {
- /* Warn them that a data or address size prefix doesn't
- affect assembly of the next line of code. */
- as_warn (_("stand-alone `%s' prefix"), t->name);
- }
- }
+ if (i.prefix[DATA_PREFIX] != 0)
+ {
+ FRAG_APPEND_1_CHAR (DATA_PREFIX_OPCODE);
+ i.prefixes -= 1;
+ code16 ^= CODE16;
+ }
- /* Copy the template we found. */
- i.tm = *t;
- if (found_reverse_match)
- {
- /* If we found a reverse match we must alter the opcode
- direction bit. found_reverse_match holds bits to change
- (different for int & float insns). */
+ size = 4;
+ if (code16)
+ size = 2;
+ }
- i.tm.base_opcode ^= found_reverse_match;
+ if (i.prefix[REX_PREFIX] != 0)
+ {
+ FRAG_APPEND_1_CHAR (i.prefix[REX_PREFIX]);
+ i.prefixes -= 1;
+ }
- i.tm.operand_types[0] = t->operand_types[1];
- i.tm.operand_types[1] = t->operand_types[0];
- }
+ if (i.prefixes != 0 && !intel_syntax)
+ as_warn (_("skipping prefixes on this instruction"));
- /* Undo SYSV386_COMPAT brokenness when in Intel mode. See i386.h */
- if (SYSV386_COMPAT
- && intel_syntax
- && (i.tm.base_opcode & 0xfffffde0) == 0xdce0)
- i.tm.base_opcode ^= FloatR;
+ p = frag_more (1 + size);
+ *p++ = i.tm.base_opcode;
- if (i.tm.opcode_modifier & FWait)
- if (! add_prefix (FWAIT_OPCODE))
- return;
+ fixP = fix_new_exp (frag_now, p - frag_now->fr_literal, size,
+ i.op[0].disps, 1, reloc (size, 1, 1, i.reloc[0]));
- /* Check string instruction segment overrides. */
- if ((i.tm.opcode_modifier & IsString) != 0 && i.mem_operands != 0)
- {
- int mem_op = (i.types[0] & AnyMem) ? 0 : 1;
- if ((i.tm.operand_types[mem_op] & EsSeg) != 0)
- {
- if (i.seg[0] != NULL && i.seg[0] != &es)
- {
- as_bad (_("`%s' operand %d must use `%%es' segment"),
- i.tm.name,
- mem_op + 1);
- return;
- }
- /* There's only ever one segment override allowed per instruction.
- This instruction possibly has a legal segment override on the
- second operand, so copy the segment to where non-string
- instructions store it, allowing common code. */
- i.seg[0] = i.seg[1];
- }
- else if ((i.tm.operand_types[mem_op + 1] & EsSeg) != 0)
- {
- if (i.seg[1] != NULL && i.seg[1] != &es)
- {
- as_bad (_("`%s' operand %d must use `%%es' segment"),
- i.tm.name,
- mem_op + 2);
- return;
- }
- }
- }
+ /* All jumps handled here are signed, but don't use a signed limit
+ check for 32 and 16 bit jumps as we want to allow wrap around at
+ 4G and 64k respectively. */
+ if (size == 1)
+ fixP->fx_signed = 1;
+}
- /* If matched instruction specifies an explicit instruction mnemonic
- suffix, use it. */
- if (i.tm.opcode_modifier & (Size16 | Size32))
- {
- if (i.tm.opcode_modifier & Size16)
- i.suffix = WORD_MNEM_SUFFIX;
- else
- i.suffix = LONG_MNEM_SUFFIX;
- }
- else if (i.reg_operands)
- {
- /* If there's no instruction mnemonic suffix we try to invent one
- based on register operands. */
- if (!i.suffix)
- {
- /* We take i.suffix from the last register operand specified,
- Destination register type is more significant than source
- register type. */
- int op;
- for (op = i.operands; --op >= 0;)
- if ((i.types[op] & Reg)
- && !(i.tm.operand_types[op] & InOutPortReg))
- {
- i.suffix = ((i.types[op] & Reg8) ? BYTE_MNEM_SUFFIX :
- (i.types[op] & Reg16) ? WORD_MNEM_SUFFIX :
- LONG_MNEM_SUFFIX);
- break;
- }
- }
- else if (i.suffix == BYTE_MNEM_SUFFIX)
- {
- int op;
- for (op = i.operands; --op >= 0;)
- {
- /* If this is an eight bit register, it's OK. If it's
- the 16 or 32 bit version of an eight bit register,
- we will just use the low portion, and that's OK too. */
- if (i.types[op] & Reg8)
- continue;
+static void
+output_interseg_jump ()
+{
+ char *p;
+ int size;
+ int prefix;
+ int code16;
- /* movzx and movsx should not generate this warning. */
- if (intel_syntax
- && (i.tm.base_opcode == 0xfb7
- || i.tm.base_opcode == 0xfb6
- || i.tm.base_opcode == 0xfbe
- || i.tm.base_opcode == 0xfbf))
- continue;
+ code16 = 0;
+ if (flag_code == CODE_16BIT)
+ code16 = CODE16;
- if ((i.types[op] & WordReg) && i.op[op].regs->reg_num < 4
-#if 0
- /* Check that the template allows eight bit regs
- This kills insns such as `orb $1,%edx', which
- maybe should be allowed. */
- && (i.tm.operand_types[op] & (Reg8|InOutPortReg))
-#endif
- )
- {
-#if REGISTER_WARNINGS
- if (!quiet_warnings
- && (i.tm.operand_types[op] & InOutPortReg) == 0)
- as_warn (_("using `%%%s' instead of `%%%s' due to `%c' suffix"),
- (i.op[op].regs - (i.types[op] & Reg16 ? 8 : 16))->reg_name,
- i.op[op].regs->reg_name,
- i.suffix);
-#endif
- continue;
- }
- /* Any other register is bad. */
- if (i.types[op] & (Reg | RegMMX | RegXMM
- | SReg2 | SReg3
- | Control | Debug | Test
- | FloatReg | FloatAcc))
- {
- as_bad (_("`%%%s' not allowed with `%s%c'"),
- i.op[op].regs->reg_name,
- i.tm.name,
- i.suffix);
- return;
- }
- }
- }
- else if (i.suffix == LONG_MNEM_SUFFIX)
- {
- int op;
+ prefix = 0;
+ if (i.prefix[DATA_PREFIX] != 0)
+ {
+ prefix = 1;
+ i.prefixes -= 1;
+ code16 ^= CODE16;
+ }
+ if (i.prefix[REX_PREFIX] != 0)
+ {
+ prefix++;
+ i.prefixes -= 1;
+ }
- for (op = i.operands; --op >= 0;)
- /* Reject eight bit registers, except where the template
- requires them. (eg. movzb) */
- if ((i.types[op] & Reg8) != 0
- && (i.tm.operand_types[op] & (Reg16 | Reg32 | Acc)) != 0)
- {
- as_bad (_("`%%%s' not allowed with `%s%c'"),
- i.op[op].regs->reg_name,
- i.tm.name,
- i.suffix);
- return;
- }
-#if REGISTER_WARNINGS
- /* Warn if the e prefix on a general reg is missing. */
- else if (!quiet_warnings
- && (i.types[op] & Reg16) != 0
- && (i.tm.operand_types[op] & (Reg32|Acc)) != 0)
- {
- as_warn (_("using `%%%s' instead of `%%%s' due to `%c' suffix"),
- (i.op[op].regs + 8)->reg_name,
- i.op[op].regs->reg_name,
- i.suffix);
- }
-#endif
- }
- else if (i.suffix == WORD_MNEM_SUFFIX)
- {
- int op;
- for (op = i.operands; --op >= 0;)
- /* Reject eight bit registers, except where the template
- requires them. (eg. movzb) */
- if ((i.types[op] & Reg8) != 0
- && (i.tm.operand_types[op] & (Reg16|Reg32|Acc)) != 0)
- {
- as_bad (_("`%%%s' not allowed with `%s%c'"),
- i.op[op].regs->reg_name,
- i.tm.name,
- i.suffix);
- return;
- }
-#if REGISTER_WARNINGS
- /* Warn if the e prefix on a general reg is present. */
- else if (!quiet_warnings
- && (i.types[op] & Reg32) != 0
- && (i.tm.operand_types[op] & (Reg16|Acc)) != 0)
- {
- as_warn (_("using `%%%s' instead of `%%%s' due to `%c' suffix"),
- (i.op[op].regs - 8)->reg_name,
- i.op[op].regs->reg_name,
- i.suffix);
- }
-#endif
- }
- else if (intel_syntax && (i.tm.opcode_modifier & IgnoreSize))
- /* Do nothing if the instruction is going to ignore the prefix. */
- ;
- else
- abort ();
- }
- else if ((i.tm.opcode_modifier & DefaultSize) && !i.suffix)
- {
- i.suffix = stackop_size;
- }
+ size = 4;
+ if (code16)
+ size = 2;
- /* Make still unresolved immediate matches conform to size of immediate
- given in i.suffix. Note: overlap2 cannot be an immediate! */
- if ((overlap0 & (Imm8 | Imm8S | Imm16 | Imm32))
- && overlap0 != Imm8 && overlap0 != Imm8S
- && overlap0 != Imm16 && overlap0 != Imm32)
- {
- if (i.suffix)
- {
- overlap0 &= (i.suffix == BYTE_MNEM_SUFFIX ? (Imm8 | Imm8S) :
- (i.suffix == WORD_MNEM_SUFFIX ? Imm16 : Imm32));
- }
- else if (overlap0 == (Imm16 | Imm32))
- {
- overlap0 =
- (flag_16bit_code ^ (i.prefix[DATA_PREFIX] != 0)) ? Imm16 : Imm32;
- }
- else
- {
- as_bad (_("no instruction mnemonic suffix given; can't determine immediate size"));
- return;
- }
- }
- if ((overlap1 & (Imm8 | Imm8S | Imm16 | Imm32))
- && overlap1 != Imm8 && overlap1 != Imm8S
- && overlap1 != Imm16 && overlap1 != Imm32)
- {
- if (i.suffix)
- {
- overlap1 &= (i.suffix == BYTE_MNEM_SUFFIX ? (Imm8 | Imm8S) :
- (i.suffix == WORD_MNEM_SUFFIX ? Imm16 : Imm32));
- }
- else if (overlap1 == (Imm16 | Imm32))
- {
- overlap1 =
- (flag_16bit_code ^ (i.prefix[DATA_PREFIX] != 0)) ? Imm16 : Imm32;
- }
- else
- {
- as_bad (_("no instruction mnemonic suffix given; can't determine immediate size"));
- return;
- }
- }
- assert ((overlap2 & Imm) == 0);
+ if (i.prefixes != 0 && !intel_syntax)
+ as_warn (_("skipping prefixes on this instruction"));
- i.types[0] = overlap0;
- if (overlap0 & ImplicitRegister)
- i.reg_operands--;
- if (overlap0 & Imm1)
- i.imm_operands = 0; /* kludge for shift insns. */
+ /* 1 opcode; 2 segment; offset */
+ p = frag_more (prefix + 1 + 2 + size);
- i.types[1] = overlap1;
- if (overlap1 & ImplicitRegister)
- i.reg_operands--;
+ if (i.prefix[DATA_PREFIX] != 0)
+ *p++ = DATA_PREFIX_OPCODE;
- i.types[2] = overlap2;
- if (overlap2 & ImplicitRegister)
- i.reg_operands--;
+ if (i.prefix[REX_PREFIX] != 0)
+ *p++ = i.prefix[REX_PREFIX];
- /* Finalize opcode. First, we change the opcode based on the operand
- size given by i.suffix: We need not change things for byte insns. */
+ *p++ = i.tm.base_opcode;
+ if (i.op[1].imms->X_op == O_constant)
+ {
+ offsetT n = i.op[1].imms->X_add_number;
- if (!i.suffix && (i.tm.opcode_modifier & W))
- {
- as_bad (_("no instruction mnemonic suffix given and no register operands; can't size instruction"));
- return;
- }
+ if (size == 2
+ && !fits_in_unsigned_word (n)
+ && !fits_in_signed_word (n))
+ {
+ as_bad (_("16-bit jump out of range"));
+ return;
+ }
+ md_number_to_chars (p, n, size);
+ }
+ else
+ fix_new_exp (frag_now, p - frag_now->fr_literal, size,
+ i.op[1].imms, 0, reloc (size, 0, 0, i.reloc[1]));
+ if (i.op[0].imms->X_op != O_constant)
+ as_bad (_("can't handle non absolute segment in `%s'"),
+ i.tm.name);
+ md_number_to_chars (p + size, (valueT) i.op[0].imms->X_add_number, 2);
+}
+
+static void
+output_insn ()
+{
+ fragS *insn_start_frag;
+ offsetT insn_start_off;
+
+ /* Tie dwarf2 debug info to the address at the start of the insn.
+ We can't do this after the insn has been output as the current
+ frag may have been closed off. eg. by frag_var. */
+ dwarf2_emit_insn (0);
+
+ insn_start_frag = frag_now;
+ insn_start_off = frag_now_fix ();
+
+ /* Output jumps. */
+ if (i.tm.opcode_modifier & Jump)
+ output_branch ();
+ else if (i.tm.opcode_modifier & (JumpByte | JumpDword))
+ output_jump ();
+ else if (i.tm.opcode_modifier & JumpInterSegment)
+ output_interseg_jump ();
+ else
+ {
+ /* Output normal instructions here. */
+ char *p;
+ unsigned char *q;
+
+ /* All opcodes on i386 have either 1 or 2 bytes, PadLock instructions
+ have 3 bytes. We may use one more higher byte to specify a prefix
+ the instruction requires. */
+ if ((i.tm.cpu_flags & CpuPadLock) != 0
+ && (i.tm.base_opcode & 0xff000000) != 0)
+ {
+ unsigned int prefix;
+ prefix = (i.tm.base_opcode >> 24) & 0xff;
+
+ if (prefix != REPE_PREFIX_OPCODE
+ || i.prefix[LOCKREP_PREFIX] != REPE_PREFIX_OPCODE)
+ add_prefix (prefix);
+ }
+ else
+ if ((i.tm.cpu_flags & CpuPadLock) == 0
+ && (i.tm.base_opcode & 0xff0000) != 0)
+ add_prefix ((i.tm.base_opcode >> 16) & 0xff);
+
+ /* The prefix bytes. */
+ for (q = i.prefix;
+ q < i.prefix + sizeof (i.prefix) / sizeof (i.prefix[0]);
+ q++)
+ {
+ if (*q)
+ {
+ p = frag_more (1);
+ md_number_to_chars (p, (valueT) *q, 1);
+ }
+ }
- /* For movzx and movsx, need to check the register type. */
- if (intel_syntax
- && (i.tm.base_opcode == 0xfb6 || i.tm.base_opcode == 0xfbe))
- if (i.suffix && i.suffix == BYTE_MNEM_SUFFIX)
+ /* Now the opcode; be careful about word order here! */
+ if (fits_in_unsigned_byte (i.tm.base_opcode))
{
- unsigned int prefix = DATA_PREFIX_OPCODE;
+ FRAG_APPEND_1_CHAR (i.tm.base_opcode);
+ }
+ else
+ {
+ if ((i.tm.cpu_flags & CpuPadLock) != 0)
+ {
+ p = frag_more (3);
+ *p++ = (i.tm.base_opcode >> 16) & 0xff;
+ }
+ else
+ p = frag_more (2);
- if ((i.op[1].regs->reg_type & Reg16) != 0)
- if (!add_prefix (prefix))
- return;
+ /* Put out high byte first: can't use md_number_to_chars! */
+ *p++ = (i.tm.base_opcode >> 8) & 0xff;
+ *p = i.tm.base_opcode & 0xff;
}
- if (i.suffix && i.suffix != BYTE_MNEM_SUFFIX)
- {
- /* It's not a byte, select word/dword operation. */
- if (i.tm.opcode_modifier & W)
- {
- if (i.tm.opcode_modifier & ShortForm)
- i.tm.base_opcode |= 8;
- else
- i.tm.base_opcode |= 1;
- }
- /* Now select between word & dword operations via the operand
- size prefix, except for instructions that will ignore this
- prefix anyway. */
- if (((intel_syntax && (i.suffix == DWORD_MNEM_SUFFIX))
- || i.suffix == LONG_MNEM_SUFFIX) == flag_16bit_code
- && !(i.tm.opcode_modifier & IgnoreSize))
- {
- unsigned int prefix = DATA_PREFIX_OPCODE;
- if (i.tm.opcode_modifier & JumpByte) /* jcxz, loop */
- prefix = ADDR_PREFIX_OPCODE;
+ /* Now the modrm byte and sib byte (if present). */
+ if (i.tm.opcode_modifier & Modrm)
+ {
+ p = frag_more (1);
+ md_number_to_chars (p,
+ (valueT) (i.rm.regmem << 0
+ | i.rm.reg << 3
+ | i.rm.mode << 6),
+ 1);
+ /* If i.rm.regmem == ESP (4)
+ && i.rm.mode != (Register mode)
+ && not 16 bit
+ ==> need second modrm byte. */
+ if (i.rm.regmem == ESCAPE_TO_TWO_BYTE_ADDRESSING
+ && i.rm.mode != 3
+ && !(i.base_reg && (i.base_reg->reg_type & Reg16) != 0))
+ {
+ p = frag_more (1);
+ md_number_to_chars (p,
+ (valueT) (i.sib.base << 0
+ | i.sib.index << 3
+ | i.sib.scale << 6),
+ 1);
+ }
+ }
- if (! add_prefix (prefix))
- return;
- }
- /* Size floating point instruction. */
- if (i.suffix == LONG_MNEM_SUFFIX
- || (intel_syntax && i.suffix == DWORD_MNEM_SUFFIX))
- {
- if (i.tm.opcode_modifier & FloatMF)
- i.tm.base_opcode ^= 4;
- }
- }
+ if (i.disp_operands)
+ output_disp (insn_start_frag, insn_start_off);
- if (i.tm.opcode_modifier & ImmExt)
- {
- /* These AMD 3DNow! and Intel Katmai New Instructions have an
- opcode suffix which is coded in the same place as an 8-bit
- immediate field would be. Here we fake an 8-bit immediate
- operand from the opcode suffix stored in tm.extension_opcode. */
+ if (i.imm_operands)
+ output_imm (insn_start_frag, insn_start_off);
+ }
- expressionS *exp;
+#ifdef DEBUG386
+ if (flag_debug)
+ {
+ pi (line, &i);
+ }
+#endif /* DEBUG386 */
+}
- assert (i.imm_operands == 0 && i.operands <= 2 && 2 < MAX_OPERANDS);
+static void
+output_disp (insn_start_frag, insn_start_off)
+ fragS *insn_start_frag;
+ offsetT insn_start_off;
+{
+ char *p;
+ unsigned int n;
- exp = &im_expressions[i.imm_operands++];
- i.op[i.operands].imms = exp;
- i.types[i.operands++] = Imm8;
- exp->X_op = O_constant;
- exp->X_add_number = i.tm.extension_opcode;
- i.tm.extension_opcode = None;
- }
+ for (n = 0; n < i.operands; n++)
+ {
+ if (i.types[n] & Disp)
+ {
+ if (i.op[n].disps->X_op == O_constant)
+ {
+ int size;
+ offsetT val;
- /* For insns with operands there are more diddles to do to the opcode. */
- if (i.operands)
- {
- /* Default segment register this instruction will use
- for memory accesses. 0 means unknown.
- This is only for optimizing out unnecessary segment overrides. */
- const seg_entry *default_seg = 0;
-
- /* The imul $imm, %reg instruction is converted into
- imul $imm, %reg, %reg, and the clr %reg instruction
- is converted into xor %reg, %reg. */
- if (i.tm.opcode_modifier & regKludge)
- {
- unsigned int first_reg_op = (i.types[0] & Reg) ? 0 : 1;
- /* Pretend we saw the extra register operand. */
- assert (i.op[first_reg_op + 1].regs == 0);
- i.op[first_reg_op + 1].regs = i.op[first_reg_op].regs;
- i.types[first_reg_op + 1] = i.types[first_reg_op];
- i.reg_operands = 2;
- }
+ size = 4;
+ if (i.types[n] & (Disp8 | Disp16 | Disp64))
+ {
+ size = 2;
+ if (i.types[n] & Disp8)
+ size = 1;
+ if (i.types[n] & Disp64)
+ size = 8;
+ }
+ val = offset_in_range (i.op[n].disps->X_add_number,
+ size);
+ p = frag_more (size);
+ md_number_to_chars (p, val, size);
+ }
+ else
+ {
+ enum bfd_reloc_code_real reloc_type;
+ int size = 4;
+ int sign = 0;
+ int pcrel = (i.flags[n] & Operand_PCrel) != 0;
+
+ /* The PC relative address is computed relative
+ to the instruction boundary, so in case immediate
+ fields follows, we need to adjust the value. */
+ if (pcrel && i.imm_operands)
+ {
+ int imm_size = 4;
+ unsigned int n1;
- if (i.tm.opcode_modifier & ShortForm)
- {
- /* The register or float register operand is in operand 0 or 1. */
- unsigned int op = (i.types[0] & (Reg | FloatReg)) ? 0 : 1;
- /* Register goes in low 3 bits of opcode. */
- i.tm.base_opcode |= i.op[op].regs->reg_num;
- if (!quiet_warnings && (i.tm.opcode_modifier & Ugh) != 0)
- {
- /* Warn about some common errors, but press on regardless.
- The first case can be generated by gcc (<= 2.8.1). */
- if (i.operands == 2)
- {
- /* Reversed arguments on faddp, fsubp, etc. */
- as_warn (_("translating to `%s %%%s,%%%s'"), i.tm.name,
- i.op[1].regs->reg_name,
- i.op[0].regs->reg_name);
- }
- else
- {
- /* Extraneous `l' suffix on fp insn. */
- as_warn (_("translating to `%s %%%s'"), i.tm.name,
- i.op[0].regs->reg_name);
- }
- }
- }
- else if (i.tm.opcode_modifier & Modrm)
- {
- /* The opcode is completed (modulo i.tm.extension_opcode which
- must be put into the modrm byte).
- Now, we make the modrm & index base bytes based on all the
- info we've collected. */
-
- /* i.reg_operands MUST be the number of real register operands;
- implicit registers do not count. */
- if (i.reg_operands == 2)
- {
- unsigned int source, dest;
- source = ((i.types[0]
- & (Reg | RegMMX | RegXMM
- | SReg2 | SReg3
- | Control | Debug | Test))
- ? 0 : 1);
- dest = source + 1;
-
- i.rm.mode = 3;
- /* One of the register operands will be encoded in the
- i.tm.reg field, the other in the combined i.tm.mode
- and i.tm.regmem fields. If no form of this
- instruction supports a memory destination operand,
- then we assume the source operand may sometimes be
- a memory operand and so we need to store the
- destination in the i.rm.reg field. */
- if ((i.tm.operand_types[dest] & AnyMem) == 0)
- {
- i.rm.reg = i.op[dest].regs->reg_num;
- i.rm.regmem = i.op[source].regs->reg_num;
- }
- else
- {
- i.rm.reg = i.op[source].regs->reg_num;
- i.rm.regmem = i.op[dest].regs->reg_num;
- }
- }
- else
- { /* If it's not 2 reg operands... */
- if (i.mem_operands)
- {
- unsigned int fake_zero_displacement = 0;
- unsigned int op = ((i.types[0] & AnyMem)
- ? 0
- : (i.types[1] & AnyMem) ? 1 : 2);
-
- default_seg = &ds;
-
- if (! i.base_reg)
- {
- i.rm.mode = 0;
- if (! i.disp_operands)
- fake_zero_displacement = 1;
- if (! i.index_reg)
- {
- /* Operand is just <disp> */
- if (flag_16bit_code ^ (i.prefix[ADDR_PREFIX] != 0))
- {
- i.rm.regmem = NO_BASE_REGISTER_16;
- i.types[op] &= ~Disp;
- i.types[op] |= Disp16;
- }
- else
- {
- i.rm.regmem = NO_BASE_REGISTER;
- i.types[op] &= ~Disp;
- i.types[op] |= Disp32;
- }
- }
- else /* ! i.base_reg && i.index_reg */
- {
- i.sib.index = i.index_reg->reg_num;
- i.sib.base = NO_BASE_REGISTER;
- i.sib.scale = i.log2_scale_factor;
- i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING;
- i.types[op] &= ~Disp;
- i.types[op] |= Disp32; /* Must be 32 bit. */
- }
- }
- else if (i.base_reg->reg_type & Reg16)
- {
- switch (i.base_reg->reg_num)
- {
- case 3: /* (%bx) */
- if (! i.index_reg)
- i.rm.regmem = 7;
- else /* (%bx,%si) -> 0, or (%bx,%di) -> 1 */
- i.rm.regmem = i.index_reg->reg_num - 6;
- break;
- case 5: /* (%bp) */
- default_seg = &ss;
- if (! i.index_reg)
- {
- i.rm.regmem = 6;
- if ((i.types[op] & Disp) == 0)
- {
- /* fake (%bp) into 0(%bp) */
- i.types[op] |= Disp8;
- fake_zero_displacement = 1;
- }
- }
- else /* (%bp,%si) -> 2, or (%bp,%di) -> 3 */
- i.rm.regmem = i.index_reg->reg_num - 6 + 2;
- break;
- default: /* (%si) -> 4 or (%di) -> 5 */
- i.rm.regmem = i.base_reg->reg_num - 6 + 4;
- }
- i.rm.mode = mode_from_disp_size (i.types[op]);
- }
- else /* i.base_reg and 32 bit mode */
+ for (n1 = 0; n1 < i.operands; n1++)
+ if (i.types[n1] & Imm)
{
- i.rm.regmem = i.base_reg->reg_num;
- i.sib.base = i.base_reg->reg_num;
- if (i.base_reg->reg_num == EBP_REG_NUM)
+ if (i.types[n1] & (Imm8 | Imm8S | Imm16 | Imm64))
{
- default_seg = &ss;
- if (i.disp_operands == 0)
- {
- fake_zero_displacement = 1;
- i.types[op] |= Disp8;
- }
+ imm_size = 2;
+ if (i.types[n1] & (Imm8 | Imm8S))
+ imm_size = 1;
+ if (i.types[n1] & Imm64)
+ imm_size = 8;
}
- else if (i.base_reg->reg_num == ESP_REG_NUM)
- {
- default_seg = &ss;
- }
- i.sib.scale = i.log2_scale_factor;
- if (! i.index_reg)
- {
- /* <disp>(%esp) becomes two byte modrm
- with no index register. We've already
- stored the code for esp in i.rm.regmem
- ie. ESCAPE_TO_TWO_BYTE_ADDRESSING. Any
- base register besides %esp will not use
- the extra modrm byte. */
- i.sib.index = NO_INDEX_REGISTER;
-#if ! SCALE1_WHEN_NO_INDEX
- /* Another case where we force the second
- modrm byte. */
- if (i.log2_scale_factor)
- i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING;
-#endif
- }
- else
- {
- i.sib.index = i.index_reg->reg_num;
- i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING;
- }
- i.rm.mode = mode_from_disp_size (i.types[op]);
+ break;
}
+ /* We should find the immediate. */
+ if (n1 == i.operands)
+ abort ();
+ i.op[n].disps->X_add_number -= imm_size;
+ }
- if (fake_zero_displacement)
- {
- /* Fakes a zero displacement assuming that i.types[op]
- holds the correct displacement size. */
- expressionS *exp;
-
- assert (i.op[op].disps == 0);
- exp = &disp_expressions[i.disp_operands++];
- i.op[op].disps = exp;
- exp->X_op = O_constant;
- exp->X_add_number = 0;
- exp->X_add_symbol = (symbolS *) 0;
- exp->X_op_symbol = (symbolS *) 0;
- }
- }
-
- /* Fill in i.rm.reg or i.rm.regmem field with register
- operand (if any) based on i.tm.extension_opcode.
- Again, we must be careful to make sure that
- segment/control/debug/test/MMX registers are coded
- into the i.rm.reg field. */
- if (i.reg_operands)
- {
- unsigned int op =
- ((i.types[0]
- & (Reg | RegMMX | RegXMM
- | SReg2 | SReg3
- | Control | Debug | Test))
- ? 0
- : ((i.types[1]
- & (Reg | RegMMX | RegXMM
- | SReg2 | SReg3
- | Control | Debug | Test))
- ? 1
- : 2));
- /* If there is an extension opcode to put here, the
- register number must be put into the regmem field. */
- if (i.tm.extension_opcode != None)
- i.rm.regmem = i.op[op].regs->reg_num;
- else
- i.rm.reg = i.op[op].regs->reg_num;
-
- /* Now, if no memory operand has set i.rm.mode = 0, 1, 2
- we must set it to 3 to indicate this is a register
- operand in the regmem field. */
- if (!i.mem_operands)
- i.rm.mode = 3;
- }
-
- /* Fill in i.rm.reg field with extension opcode (if any). */
- if (i.tm.extension_opcode != None)
- i.rm.reg = i.tm.extension_opcode;
- }
- }
- else if (i.tm.opcode_modifier & (Seg2ShortForm | Seg3ShortForm))
- {
- if (i.tm.base_opcode == POP_SEG_SHORT
- && i.op[0].regs->reg_num == 1)
- {
- as_bad (_("you can't `pop %%cs'"));
- return;
- }
- i.tm.base_opcode |= (i.op[0].regs->reg_num << 3);
- }
- else if ((i.tm.base_opcode & ~(D|W)) == MOV_AX_DISP32)
- {
- default_seg = &ds;
- }
- else if ((i.tm.opcode_modifier & IsString) != 0)
- {
- /* For the string instructions that allow a segment override
- on one of their operands, the default segment is ds. */
- default_seg = &ds;
- }
+ if (i.types[n] & Disp32S)
+ sign = 1;
- /* If a segment was explicitly specified,
- and the specified segment is not the default,
- use an opcode prefix to select it.
- If we never figured out what the default segment is,
- then default_seg will be zero at this point,
- and the specified segment prefix will always be used. */
- if ((i.seg[0]) && (i.seg[0] != default_seg))
- {
- if (! add_prefix (i.seg[0]->seg_prefix))
- return;
- }
- }
- else if (!quiet_warnings && (i.tm.opcode_modifier & Ugh) != 0)
- {
- /* UnixWare fsub no args is alias for fsubp, fadd -> faddp, etc. */
- as_warn (_("translating to `%sp'"), i.tm.name);
- }
- }
+ if (i.types[n] & (Disp16 | Disp64))
+ {
+ size = 2;
+ if (i.types[n] & Disp64)
+ size = 8;
+ }
- /* Handle conversion of 'int $3' --> special int3 insn. */
- if (i.tm.base_opcode == INT_OPCODE && i.op[0].imms->X_add_number == 3)
- {
- i.tm.base_opcode = INT3_OPCODE;
- i.imm_operands = 0;
- }
+ p = frag_more (size);
+ reloc_type = reloc (size, pcrel, sign, i.reloc[n]);
+ if (reloc_type == BFD_RELOC_32
+ && GOT_symbol
+ && GOT_symbol == i.op[n].disps->X_add_symbol
+ && (i.op[n].disps->X_op == O_symbol
+ || (i.op[n].disps->X_op == O_add
+ && ((symbol_get_value_expression
+ (i.op[n].disps->X_op_symbol)->X_op)
+ == O_subtract))))
+ {
+ offsetT add;
- if ((i.tm.opcode_modifier & (Jump | JumpByte | JumpDword))
- && i.op[0].disps->X_op == O_constant)
- {
- /* Convert "jmp constant" (and "call constant") to a jump (call) to
- the absolute address given by the constant. Since ix86 jumps and
- calls are pc relative, we need to generate a reloc. */
- i.op[0].disps->X_add_symbol = &abs_symbol;
- i.op[0].disps->X_op = O_symbol;
+ if (insn_start_frag == frag_now)
+ add = (p - frag_now->fr_literal) - insn_start_off;
+ else
+ {
+ fragS *fr;
+
+ add = insn_start_frag->fr_fix - insn_start_off;
+ for (fr = insn_start_frag->fr_next;
+ fr && fr != frag_now; fr = fr->fr_next)
+ add += fr->fr_fix;
+ add += p - frag_now->fr_literal;
+ }
+
+ /* We don't support dynamic linking on x86-64 yet. */
+ if (flag_code == CODE_64BIT)
+ abort ();
+ reloc_type = BFD_RELOC_386_GOTPC;
+ i.op[n].disps->X_add_number += add;
+ }
+ fix_new_exp (frag_now, p - frag_now->fr_literal, size,
+ i.op[n].disps, pcrel, reloc_type);
+ }
+ }
}
+}
- /* We are ready to output the insn. */
- {
- register char *p;
+static void
+output_imm (insn_start_frag, insn_start_off)
+ fragS *insn_start_frag;
+ offsetT insn_start_off;
+{
+ char *p;
+ unsigned int n;
- /* Output jumps. */
- if (i.tm.opcode_modifier & Jump)
- {
- int size;
- int code16;
- int prefix;
+ for (n = 0; n < i.operands; n++)
+ {
+ if (i.types[n] & Imm)
+ {
+ if (i.op[n].imms->X_op == O_constant)
+ {
+ int size;
+ offsetT val;
- code16 = 0;
- if (flag_16bit_code)
- code16 = CODE16;
+ size = 4;
+ if (i.types[n] & (Imm8 | Imm8S | Imm16 | Imm64))
+ {
+ size = 2;
+ if (i.types[n] & (Imm8 | Imm8S))
+ size = 1;
+ else if (i.types[n] & Imm64)
+ size = 8;
+ }
+ val = offset_in_range (i.op[n].imms->X_add_number,
+ size);
+ p = frag_more (size);
+ md_number_to_chars (p, val, size);
+ }
+ else
+ {
+ /* Not absolute_section.
+ Need a 32-bit fixup (don't support 8bit
+ non-absolute imms). Try to support other
+ sizes ... */
+ enum bfd_reloc_code_real reloc_type;
+ int size = 4;
+ int sign = 0;
+
+ if ((i.types[n] & (Imm32S))
+ && i.suffix == QWORD_MNEM_SUFFIX)
+ sign = 1;
+ if (i.types[n] & (Imm8 | Imm8S | Imm16 | Imm64))
+ {
+ size = 2;
+ if (i.types[n] & (Imm8 | Imm8S))
+ size = 1;
+ if (i.types[n] & Imm64)
+ size = 8;
+ }
- prefix = 0;
- if (i.prefix[DATA_PREFIX])
- {
- prefix = 1;
- i.prefixes -= 1;
- code16 ^= CODE16;
- }
+ p = frag_more (size);
+ reloc_type = reloc (size, 0, sign, i.reloc[n]);
+
+ /* This is tough to explain. We end up with this one if we
+ * have operands that look like
+ * "_GLOBAL_OFFSET_TABLE_+[.-.L284]". The goal here is to
+ * obtain the absolute address of the GOT, and it is strongly
+ * preferable from a performance point of view to avoid using
+ * a runtime relocation for this. The actual sequence of
+ * instructions often look something like:
+ *
+ * call .L66
+ * .L66:
+ * popl %ebx
+ * addl $_GLOBAL_OFFSET_TABLE_+[.-.L66],%ebx
+ *
+ * The call and pop essentially return the absolute address
+ * of the label .L66 and store it in %ebx. The linker itself
+ * will ultimately change the first operand of the addl so
+ * that %ebx points to the GOT, but to keep things simple, the
+ * .o file must have this operand set so that it generates not
+ * the absolute address of .L66, but the absolute address of
+ * itself. This allows the linker itself simply treat a GOTPC
+ * relocation as asking for a pcrel offset to the GOT to be
+ * added in, and the addend of the relocation is stored in the
+ * operand field for the instruction itself.
+ *
+ * Our job here is to fix the operand so that it would add
+ * the correct offset so that %ebx would point to itself. The
+ * thing that is tricky is that .-.L66 will point to the
+ * beginning of the instruction, so we need to further modify
+ * the operand so that it will point to itself. There are
+ * other cases where you have something like:
+ *
+ * .long $_GLOBAL_OFFSET_TABLE_+[.-.L66]
+ *
+ * and here no correction would be required. Internally in
+ * the assembler we treat operands of this form as not being
+ * pcrel since the '.' is explicitly mentioned, and I wonder
+ * whether it would simplify matters to do it this way. Who
+ * knows. In earlier versions of the PIC patches, the
+ * pcrel_adjust field was used to store the correction, but
+ * since the expression is not pcrel, I felt it would be
+ * confusing to do it this way. */
+
+ if (reloc_type == BFD_RELOC_32
+ && GOT_symbol
+ && GOT_symbol == i.op[n].imms->X_add_symbol
+ && (i.op[n].imms->X_op == O_symbol
+ || (i.op[n].imms->X_op == O_add
+ && ((symbol_get_value_expression
+ (i.op[n].imms->X_op_symbol)->X_op)
+ == O_subtract))))
+ {
+ offsetT add;
- size = 4;
- if (code16)
- size = 2;
-
- if (i.prefixes != 0 && !intel_syntax)
- as_warn (_("skipping prefixes on this instruction"));
-
- /* It's always a symbol; End frag & setup for relax.
- Make sure there is enough room in this frag for the largest
- instruction we may generate in md_convert_frag. This is 2
- bytes for the opcode and room for the prefix and largest
- displacement. */
- frag_grow (prefix + 2 + size);
- insn_size += prefix + 1;
- /* Prefix and 1 opcode byte go in fr_fix. */
- p = frag_more (prefix + 1);
- if (prefix)
- *p++ = DATA_PREFIX_OPCODE;
- *p = i.tm.base_opcode;
- /* 1 possible extra opcode + displacement go in var part.
- Pass reloc in fr_var. */
- frag_var (rs_machine_dependent,
- 1 + size,
- i.disp_reloc[0],
- ((unsigned char) *p == JUMP_PC_RELATIVE
- ? ENCODE_RELAX_STATE (UNCOND_JUMP, SMALL) | code16
- : ENCODE_RELAX_STATE (COND_JUMP, SMALL) | code16),
- i.op[0].disps->X_add_symbol,
- i.op[0].disps->X_add_number,
- p);
- }
- else if (i.tm.opcode_modifier & (JumpByte | JumpDword))
- {
- int size;
+ if (insn_start_frag == frag_now)
+ add = (p - frag_now->fr_literal) - insn_start_off;
+ else
+ {
+ fragS *fr;
- if (i.tm.opcode_modifier & JumpByte)
- {
- /* This is a loop or jecxz type instruction. */
- size = 1;
- if (i.prefix[ADDR_PREFIX])
- {
- insn_size += 1;
- FRAG_APPEND_1_CHAR (ADDR_PREFIX_OPCODE);
- i.prefixes -= 1;
- }
- }
- else
- {
- int code16;
+ add = insn_start_frag->fr_fix - insn_start_off;
+ for (fr = insn_start_frag->fr_next;
+ fr && fr != frag_now; fr = fr->fr_next)
+ add += fr->fr_fix;
+ add += p - frag_now->fr_literal;
+ }
- code16 = 0;
- if (flag_16bit_code)
- code16 = CODE16;
+ /* We don't support dynamic linking on x86-64 yet. */
+ if (flag_code == CODE_64BIT)
+ abort ();
+ reloc_type = BFD_RELOC_386_GOTPC;
+ i.op[n].imms->X_add_number += add;
+ }
+ fix_new_exp (frag_now, p - frag_now->fr_literal, size,
+ i.op[n].imms, 0, reloc_type);
+ }
+ }
+ }
+}
+\f
+#ifndef LEX_AT
+static char *lex_got PARAMS ((enum bfd_reloc_code_real *, int *));
- if (i.prefix[DATA_PREFIX])
- {
- insn_size += 1;
- FRAG_APPEND_1_CHAR (DATA_PREFIX_OPCODE);
- i.prefixes -= 1;
- code16 ^= CODE16;
- }
+/* Parse operands of the form
+ <symbol>@GOTOFF+<nnn>
+ and similar .plt or .got references.
- size = 4;
- if (code16)
- size = 2;
- }
+ If we find one, set up the correct relocation in RELOC and copy the
+ input string, minus the `@GOTOFF' into a malloc'd buffer for
+ parsing by the calling routine. Return this buffer, and if ADJUST
+ is non-null set it to the length of the string we removed from the
+ input line. Otherwise return NULL. */
+static char *
+lex_got (reloc, adjust)
+ enum bfd_reloc_code_real *reloc;
+ int *adjust;
+{
+ static const char * const mode_name[NUM_FLAG_CODE] = { "32", "16", "64" };
+ static const struct {
+ const char *str;
+ const enum bfd_reloc_code_real rel[NUM_FLAG_CODE];
+ } gotrel[] = {
+ { "PLT", { BFD_RELOC_386_PLT32, 0, BFD_RELOC_X86_64_PLT32 } },
+ { "GOTOFF", { BFD_RELOC_386_GOTOFF, 0, 0 } },
+ { "GOTPCREL", { 0, 0, BFD_RELOC_X86_64_GOTPCREL } },
+ { "TLSGD", { BFD_RELOC_386_TLS_GD, 0, BFD_RELOC_X86_64_TLSGD } },
+ { "TLSLDM", { BFD_RELOC_386_TLS_LDM, 0, 0 } },
+ { "TLSLD", { 0, 0, BFD_RELOC_X86_64_TLSLD } },
+ { "GOTTPOFF", { BFD_RELOC_386_TLS_IE_32, 0, BFD_RELOC_X86_64_GOTTPOFF } },
+ { "TPOFF", { BFD_RELOC_386_TLS_LE_32, 0, BFD_RELOC_X86_64_TPOFF32 } },
+ { "NTPOFF", { BFD_RELOC_386_TLS_LE, 0, 0 } },
+ { "DTPOFF", { BFD_RELOC_386_TLS_LDO_32, 0, BFD_RELOC_X86_64_DTPOFF32 } },
+ { "GOTNTPOFF",{ BFD_RELOC_386_TLS_GOTIE, 0, 0 } },
+ { "INDNTPOFF",{ BFD_RELOC_386_TLS_IE, 0, 0 } },
+ { "GOT", { BFD_RELOC_386_GOT32, 0, BFD_RELOC_X86_64_GOT32 } }
+ };
+ char *cp;
+ unsigned int j;
- if (i.prefixes != 0 && !intel_syntax)
- as_warn (_("skipping prefixes on this instruction"));
+ for (cp = input_line_pointer; *cp != '@'; cp++)
+ if (is_end_of_line[(unsigned char) *cp])
+ return NULL;
- if (fits_in_unsigned_byte (i.tm.base_opcode))
- {
- insn_size += 1 + size;
- p = frag_more (1 + size);
- }
- else
- {
- /* Opcode can be at most two bytes. */
- insn_size += 2 + size;
- p = frag_more (2 + size);
- *p++ = (i.tm.base_opcode >> 8) & 0xff;
- }
- *p++ = i.tm.base_opcode & 0xff;
+ for (j = 0; j < sizeof (gotrel) / sizeof (gotrel[0]); j++)
+ {
+ int len;
- fix_new_exp (frag_now, p - frag_now->fr_literal, size,
- i.op[0].disps, 1, reloc (size, 1, i.disp_reloc[0]));
- }
- else if (i.tm.opcode_modifier & JumpInterSegment)
- {
- int size;
- int prefix;
- int code16;
+ len = strlen (gotrel[j].str);
+ if (strncasecmp (cp + 1, gotrel[j].str, len) == 0)
+ {
+ if (gotrel[j].rel[(unsigned int) flag_code] != 0)
+ {
+ int first, second;
+ char *tmpbuf, *past_reloc;
+
+ *reloc = gotrel[j].rel[(unsigned int) flag_code];
+ if (adjust)
+ *adjust = len;
+
+ if (GOT_symbol == NULL)
+ GOT_symbol = symbol_find_or_make (GLOBAL_OFFSET_TABLE_NAME);
+
+ /* Replace the relocation token with ' ', so that
+ errors like foo@GOTOFF1 will be detected. */
+
+ /* The length of the first part of our input line. */
+ first = cp - input_line_pointer;
+
+ /* The second part goes from after the reloc token until
+ (and including) an end_of_line char. Don't use strlen
+ here as the end_of_line char may not be a NUL. */
+ past_reloc = cp + 1 + len;
+ for (cp = past_reloc; !is_end_of_line[(unsigned char) *cp++]; )
+ ;
+ second = cp - past_reloc;
+
+ /* Allocate and copy string. The trailing NUL shouldn't
+ be necessary, but be safe. */
+ tmpbuf = xmalloc (first + second + 2);
+ memcpy (tmpbuf, input_line_pointer, first);
+ tmpbuf[first] = ' ';
+ memcpy (tmpbuf + first + 1, past_reloc, second);
+ tmpbuf[first + second + 1] = '\0';
+ return tmpbuf;
+ }
- code16 = 0;
- if (flag_16bit_code)
- code16 = CODE16;
+ as_bad (_("@%s reloc is not supported in %s bit mode"),
+ gotrel[j].str, mode_name[(unsigned int) flag_code]);
+ return NULL;
+ }
+ }
- prefix = 0;
- if (i.prefix[DATA_PREFIX])
- {
- prefix = 1;
- i.prefixes -= 1;
- code16 ^= CODE16;
- }
+ /* Might be a symbol version string. Don't as_bad here. */
+ return NULL;
+}
- size = 4;
- if (code16)
- size = 2;
+/* x86_cons_fix_new is called via the expression parsing code when a
+ reloc is needed. We use this hook to get the correct .got reloc. */
+static enum bfd_reloc_code_real got_reloc = NO_RELOC;
- if (i.prefixes != 0 && !intel_syntax)
- as_warn (_("skipping prefixes on this instruction"));
+void
+x86_cons_fix_new (frag, off, len, exp)
+ fragS *frag;
+ unsigned int off;
+ unsigned int len;
+ expressionS *exp;
+{
+ enum bfd_reloc_code_real r = reloc (len, 0, 0, got_reloc);
+ got_reloc = NO_RELOC;
+ fix_new_exp (frag, off, len, exp, 0, r);
+}
- /* 1 opcode; 2 segment; offset */
- insn_size += prefix + 1 + 2 + size;
- p = frag_more (prefix + 1 + 2 + size);
- if (prefix)
- *p++ = DATA_PREFIX_OPCODE;
- *p++ = i.tm.base_opcode;
- if (i.op[1].imms->X_op == O_constant)
- {
- offsetT n = i.op[1].imms->X_add_number;
+void
+x86_cons (exp, size)
+ expressionS *exp;
+ int size;
+{
+ if (size == 4)
+ {
+ /* Handle @GOTOFF and the like in an expression. */
+ char *save;
+ char *gotfree_input_line;
+ int adjust;
- if (size == 2
- && !fits_in_unsigned_word (n)
- && !fits_in_signed_word (n))
- {
- as_bad (_("16-bit jump out of range"));
- return;
- }
- md_number_to_chars (p, n, size);
- }
- else
- fix_new_exp (frag_now, p - frag_now->fr_literal, size,
- i.op[1].imms, 0, reloc (size, 0, i.disp_reloc[0]));
- if (i.op[0].imms->X_op != O_constant)
- as_bad (_("can't handle non absolute segment in `%s'"),
- i.tm.name);
- md_number_to_chars (p + size, (valueT) i.op[0].imms->X_add_number, 2);
- }
- else
- {
- /* Output normal instructions here. */
- unsigned char *q;
+ save = input_line_pointer;
+ gotfree_input_line = lex_got (&got_reloc, &adjust);
+ if (gotfree_input_line)
+ input_line_pointer = gotfree_input_line;
- /* The prefix bytes. */
- for (q = i.prefix;
- q < i.prefix + sizeof (i.prefix) / sizeof (i.prefix[0]);
- q++)
- {
- if (*q)
- {
- insn_size += 1;
- p = frag_more (1);
- md_number_to_chars (p, (valueT) *q, 1);
- }
- }
+ expression (exp);
- /* Now the opcode; be careful about word order here! */
- if (fits_in_unsigned_byte (i.tm.base_opcode))
- {
- insn_size += 1;
- FRAG_APPEND_1_CHAR (i.tm.base_opcode);
- }
- else if (fits_in_unsigned_word (i.tm.base_opcode))
- {
- insn_size += 2;
- p = frag_more (2);
- /* Put out high byte first: can't use md_number_to_chars! */
- *p++ = (i.tm.base_opcode >> 8) & 0xff;
- *p = i.tm.base_opcode & 0xff;
- }
- else
- { /* Opcode is either 3 or 4 bytes. */
- if (i.tm.base_opcode & 0xff000000)
- {
- insn_size += 4;
- p = frag_more (4);
- *p++ = (i.tm.base_opcode >> 24) & 0xff;
- }
- else
- {
- insn_size += 3;
- p = frag_more (3);
- }
- *p++ = (i.tm.base_opcode >> 16) & 0xff;
- *p++ = (i.tm.base_opcode >> 8) & 0xff;
- *p = (i.tm.base_opcode) & 0xff;
- }
+ if (gotfree_input_line)
+ {
+ /* expression () has merrily parsed up to the end of line,
+ or a comma - in the wrong buffer. Transfer how far
+ input_line_pointer has moved to the right buffer. */
+ input_line_pointer = (save
+ + (input_line_pointer - gotfree_input_line)
+ + adjust);
+ free (gotfree_input_line);
+ }
+ }
+ else
+ expression (exp);
+}
+#endif
- /* Now the modrm byte and sib byte (if present). */
- if (i.tm.opcode_modifier & Modrm)
- {
- insn_size += 1;
- p = frag_more (1);
- md_number_to_chars (p,
- (valueT) (i.rm.regmem << 0
- | i.rm.reg << 3
- | i.rm.mode << 6),
- 1);
- /* If i.rm.regmem == ESP (4)
- && i.rm.mode != (Register mode)
- && not 16 bit
- ==> need second modrm byte. */
- if (i.rm.regmem == ESCAPE_TO_TWO_BYTE_ADDRESSING
- && i.rm.mode != 3
- && !(i.base_reg && (i.base_reg->reg_type & Reg16) != 0))
- {
- insn_size += 1;
- p = frag_more (1);
- md_number_to_chars (p,
- (valueT) (i.sib.base << 0
- | i.sib.index << 3
- | i.sib.scale << 6),
- 1);
- }
- }
+#ifdef TE_PE
- if (i.disp_operands)
- {
- register unsigned int n;
+void
+x86_pe_cons_fix_new (frag, off, len, exp)
+ fragS *frag;
+ unsigned int off;
+ unsigned int len;
+ expressionS *exp;
+{
+ enum bfd_reloc_code_real r = reloc (len, 0, 0, NO_RELOC);
- for (n = 0; n < i.operands; n++)
- {
- if (i.types[n] & Disp)
- {
- if (i.op[n].disps->X_op == O_constant)
- {
- int size;
- offsetT val;
+ if (exp->X_op == O_secrel)
+ {
+ exp->X_op = O_symbol;
+ r = BFD_RELOC_32_SECREL;
+ }
- size = 4;
- if (i.types[n] & (Disp8 | Disp16))
- {
- size = 2;
- if (i.types[n] & Disp8)
- size = 1;
- }
- val = offset_in_range (i.op[n].disps->X_add_number,
- size);
- insn_size += size;
- p = frag_more (size);
- md_number_to_chars (p, val, size);
- }
- else
- {
- int size = 4;
+ fix_new_exp (frag, off, len, exp, 0, r);
+}
- if (i.types[n] & Disp16)
- size = 2;
+static void
+pe_directive_secrel (dummy)
+ int dummy ATTRIBUTE_UNUSED;
+{
+ expressionS exp;
- insn_size += size;
- p = frag_more (size);
- fix_new_exp (frag_now, p - frag_now->fr_literal, size,
- i.op[n].disps, 0,
- reloc (size, 0, i.disp_reloc[n]));
- }
- }
- }
- }
+ do
+ {
+ expression (&exp);
+ if (exp.X_op == O_symbol)
+ exp.X_op = O_secrel;
- /* Output immediate. */
- if (i.imm_operands)
- {
- register unsigned int n;
+ emit_expr (&exp, 4);
+ }
+ while (*input_line_pointer++ == ',');
- for (n = 0; n < i.operands; n++)
- {
- if (i.types[n] & Imm)
- {
- if (i.op[n].imms->X_op == O_constant)
- {
- int size;
- offsetT val;
+ input_line_pointer--;
+ demand_empty_rest_of_line ();
+}
- size = 4;
- if (i.types[n] & (Imm8 | Imm8S | Imm16))
- {
- size = 2;
- if (i.types[n] & (Imm8 | Imm8S))
- size = 1;
- }
- val = offset_in_range (i.op[n].imms->X_add_number,
- size);
- insn_size += size;
- p = frag_more (size);
- md_number_to_chars (p, val, size);
- }
- else
- {
- /* Not absolute_section.
- Need a 32-bit fixup (don't support 8bit
- non-absolute imms). Try to support other
- sizes ... */
-#ifdef BFD_ASSEMBLER
- enum bfd_reloc_code_real reloc_type;
-#else
- int reloc_type;
#endif
- int size = 4;
-
- if (i.types[n] & Imm16)
- size = 2;
- else if (i.types[n] & (Imm8 | Imm8S))
- size = 1;
-
- insn_size += size;
- p = frag_more (size);
- reloc_type = reloc (size, 0, i.disp_reloc[0]);
-#ifdef BFD_ASSEMBLER
- if (reloc_type == BFD_RELOC_32
- && GOT_symbol
- && GOT_symbol == i.op[n].imms->X_add_symbol
- && (i.op[n].imms->X_op == O_symbol
- || (i.op[n].imms->X_op == O_add
- && ((symbol_get_value_expression
- (i.op[n].imms->X_op_symbol)->X_op)
- == O_subtract))))
- {
- reloc_type = BFD_RELOC_386_GOTPC;
- i.op[n].imms->X_add_number += 3;
- }
-#endif
- fix_new_exp (frag_now, p - frag_now->fr_literal, size,
- i.op[n].imms, 0, reloc_type);
- }
- }
- }
- }
- }
-
- dwarf2_emit_insn (insn_size);
-#ifdef DEBUG386
- if (flag_debug)
- {
- pi (line, &i);
- }
-#endif /* DEBUG386 */
- }
-}
-\f
static int i386_immediate PARAMS ((char *));
static int
char *imm_start;
{
char *save_input_line_pointer;
+#ifndef LEX_AT
+ char *gotfree_input_line;
+#endif
segT exp_seg = 0;
expressionS *exp;
input_line_pointer = imm_start;
#ifndef LEX_AT
- {
- /* We can have operands of the form
- <symbol>@GOTOFF+<nnn>
- Take the easy way out here and copy everything
- into a temporary buffer... */
- register char *cp;
-
- cp = strchr (input_line_pointer, '@');
- if (cp != NULL)
- {
- char *tmpbuf;
- int len = 0;
- int first;
-
- /* GOT relocations are not supported in 16 bit mode. */
- if (flag_16bit_code)
- as_bad (_("GOT relocations not supported in 16 bit mode"));
-
- if (GOT_symbol == NULL)
- GOT_symbol = symbol_find_or_make (GLOBAL_OFFSET_TABLE_NAME);
-
- if (strncmp (cp + 1, "PLT", 3) == 0)
- {
- i.disp_reloc[this_operand] = BFD_RELOC_386_PLT32;
- len = 3;
- }
- else if (strncmp (cp + 1, "GOTOFF", 6) == 0)
- {
- i.disp_reloc[this_operand] = BFD_RELOC_386_GOTOFF;
- len = 6;
- }
- else if (strncmp (cp + 1, "GOT", 3) == 0)
- {
- i.disp_reloc[this_operand] = BFD_RELOC_386_GOT32;
- len = 3;
- }
- else
- as_bad (_("bad reloc specifier in expression"));
-
- /* Replace the relocation token with ' ', so that errors like
- foo@GOTOFF1 will be detected. */
- first = cp - input_line_pointer;
- tmpbuf = (char *) alloca (strlen (input_line_pointer));
- memcpy (tmpbuf, input_line_pointer, first);
- tmpbuf[first] = ' ';
- strcpy (tmpbuf + first + 1, cp + 1 + len);
- input_line_pointer = tmpbuf;
- }
- }
+ gotfree_input_line = lex_got (&i.reloc[this_operand], NULL);
+ if (gotfree_input_line)
+ input_line_pointer = gotfree_input_line;
#endif
exp_seg = expression (exp);
SKIP_WHITESPACE ();
if (*input_line_pointer)
- as_bad (_("ignoring junk `%s' after expression"), input_line_pointer);
+ as_bad (_("junk `%s' after expression"), input_line_pointer);
input_line_pointer = save_input_line_pointer;
+#ifndef LEX_AT
+ if (gotfree_input_line)
+ free (gotfree_input_line);
+#endif
if (exp->X_op == O_absent || exp->X_op == O_big)
{
exp->X_add_symbol = (symbolS *) 0;
exp->X_op_symbol = (symbolS *) 0;
}
-
- if (exp->X_op == O_constant)
+ else if (exp->X_op == O_constant)
{
/* Size it properly later. */
- i.types[this_operand] |= Imm32;
+ i.types[this_operand] |= Imm64;
+ /* If BFD64, sign extend val. */
+ if (!use_rela_relocations)
+ if ((exp->X_add_number & ~(((addressT) 2 << 31) - 1)) == 0)
+ exp->X_add_number = (exp->X_add_number ^ ((addressT) 1 << 31)) - ((addressT) 1 << 31);
}
#if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
- else if (1
-#ifdef BFD_ASSEMBLER
- && OUTPUT_FLAVOR == bfd_target_aout_flavour
-#endif
+ else if (OUTPUT_FLAVOR == bfd_target_aout_flavour
+ && exp_seg != absolute_section
&& exp_seg != text_section
&& exp_seg != data_section
&& exp_seg != bss_section
&& exp_seg != undefined_section
-#ifdef BFD_ASSEMBLER
- && !bfd_is_com_section (exp_seg)
-#endif
- )
+ && !bfd_is_com_section (exp_seg))
{
-#ifdef BFD_ASSEMBLER
as_bad (_("unimplemented segment %s in operand"), exp_seg->name);
-#else
- as_bad (_("unimplemented segment type %d in operand"), exp_seg);
-#endif
return 0;
}
#endif
{
/* This is an address. The size of the address will be
determined later, depending on destination register,
- suffix, or the default for the section. We exclude
- Imm8S here so that `push $foo' and other instructions
- with an Imm8S form will use Imm16 or Imm32. */
- i.types[this_operand] |= (Imm8 | Imm16 | Imm32);
+ suffix, or the default for the section. */
+ i.types[this_operand] |= Imm8 | Imm16 | Imm32 | Imm32S | Imm64;
}
return 1;
}
-static int i386_scale PARAMS ((char *));
+static char *i386_scale PARAMS ((char *));
-static int
+static char *
i386_scale (scale)
char *scale;
{
- if (!isdigit (*scale))
- goto bad_scale;
+ offsetT val;
+ char *save = input_line_pointer;
- switch (*scale)
+ input_line_pointer = scale;
+ val = get_absolute_expression ();
+
+ switch (val)
{
- case '0':
- case '1':
+ case 1:
i.log2_scale_factor = 0;
break;
- case '2':
+ case 2:
i.log2_scale_factor = 1;
break;
- case '4':
+ case 4:
i.log2_scale_factor = 2;
break;
- case '8':
+ case 8:
i.log2_scale_factor = 3;
break;
default:
- bad_scale:
as_bad (_("expecting scale factor of 1, 2, 4, or 8: got `%s'"),
scale);
- return 0;
+ input_line_pointer = save;
+ return NULL;
}
- if (i.log2_scale_factor != 0 && ! i.index_reg)
+ if (i.log2_scale_factor != 0 && i.index_reg == 0)
{
as_warn (_("scale factor of %d without an index register"),
1 << i.log2_scale_factor);
i.log2_scale_factor = 0;
#endif
}
- return 1;
+ scale = input_line_pointer;
+ input_line_pointer = save;
+ return scale;
}
static int i386_displacement PARAMS ((char *, char *));
char *disp_start;
char *disp_end;
{
- register expressionS *exp;
+ expressionS *exp;
segT exp_seg = 0;
char *save_input_line_pointer;
+#ifndef LEX_AT
+ char *gotfree_input_line;
+#endif
int bigdisp = Disp32;
- if (flag_16bit_code ^ (i.prefix[ADDR_PREFIX] != 0))
+ if (flag_code == CODE_64BIT)
+ {
+ if (i.prefix[ADDR_PREFIX] == 0)
+ bigdisp = Disp64;
+ }
+ else if ((flag_code == CODE_16BIT) ^ (i.prefix[ADDR_PREFIX] != 0))
bigdisp = Disp16;
i.types[this_operand] |= bigdisp;
}
#endif
#ifndef LEX_AT
- {
- /* We can have operands of the form
- <symbol>@GOTOFF+<nnn>
- Take the easy way out here and copy everything
- into a temporary buffer... */
- register char *cp;
-
- cp = strchr (input_line_pointer, '@');
- if (cp != NULL)
- {
- char *tmpbuf;
- int len = 0;
- int first;
-
- /* GOT relocations are not supported in 16 bit mode. */
- if (flag_16bit_code)
- as_bad (_("GOT relocations not supported in 16 bit mode"));
-
- if (GOT_symbol == NULL)
- GOT_symbol = symbol_find_or_make (GLOBAL_OFFSET_TABLE_NAME);
-
- if (strncmp (cp + 1, "PLT", 3) == 0)
- {
- i.disp_reloc[this_operand] = BFD_RELOC_386_PLT32;
- len = 3;
- }
- else if (strncmp (cp + 1, "GOTOFF", 6) == 0)
- {
- i.disp_reloc[this_operand] = BFD_RELOC_386_GOTOFF;
- len = 6;
- }
- else if (strncmp (cp + 1, "GOT", 3) == 0)
- {
- i.disp_reloc[this_operand] = BFD_RELOC_386_GOT32;
- len = 3;
- }
- else
- as_bad (_("bad reloc specifier in expression"));
-
- /* Replace the relocation token with ' ', so that errors like
- foo@GOTOFF1 will be detected. */
- first = cp - input_line_pointer;
- tmpbuf = (char *) alloca (strlen (input_line_pointer));
- memcpy (tmpbuf, input_line_pointer, first);
- tmpbuf[first] = ' ';
- strcpy (tmpbuf + first + 1, cp + 1 + len);
- input_line_pointer = tmpbuf;
- }
- }
+ gotfree_input_line = lex_got (&i.reloc[this_operand], NULL);
+ if (gotfree_input_line)
+ input_line_pointer = gotfree_input_line;
#endif
exp_seg = expression (exp);
-#ifdef BFD_ASSEMBLER
+ SKIP_WHITESPACE ();
+ if (*input_line_pointer)
+ as_bad (_("junk `%s' after expression"), input_line_pointer);
+#if GCC_ASM_O_HACK
+ RESTORE_END_STRING (disp_end + 1);
+#endif
+ RESTORE_END_STRING (disp_end);
+ input_line_pointer = save_input_line_pointer;
+#ifndef LEX_AT
+ if (gotfree_input_line)
+ free (gotfree_input_line);
+#endif
+
/* We do this to make sure that the section symbol is in
the symbol table. We will ultimately change the relocation
to be relative to the beginning of the section. */
- if (i.disp_reloc[this_operand] == BFD_RELOC_386_GOTOFF)
+ if (i.reloc[this_operand] == BFD_RELOC_386_GOTOFF
+ || i.reloc[this_operand] == BFD_RELOC_X86_64_GOTPCREL)
{
- if (S_IS_LOCAL(exp->X_add_symbol)
+ if (exp->X_op != O_symbol)
+ {
+ as_bad (_("bad expression used with @%s"),
+ (i.reloc[this_operand] == BFD_RELOC_X86_64_GOTPCREL
+ ? "GOTPCREL"
+ : "GOTOFF"));
+ return 0;
+ }
+
+ if (S_IS_LOCAL (exp->X_add_symbol)
&& S_GET_SEGMENT (exp->X_add_symbol) != undefined_section)
section_symbol (S_GET_SEGMENT (exp->X_add_symbol));
- assert (exp->X_op == O_symbol);
exp->X_op = O_subtract;
exp->X_op_symbol = GOT_symbol;
- i.disp_reloc[this_operand] = BFD_RELOC_32;
+ if (i.reloc[this_operand] == BFD_RELOC_X86_64_GOTPCREL)
+ i.reloc[this_operand] = BFD_RELOC_32_PCREL;
+ else
+ i.reloc[this_operand] = BFD_RELOC_32;
}
-#endif
-
- SKIP_WHITESPACE ();
- if (*input_line_pointer)
- as_bad (_("ignoring junk `%s' after expression"),
- input_line_pointer);
-#if GCC_ASM_O_HACK
- RESTORE_END_STRING (disp_end + 1);
-#endif
- RESTORE_END_STRING (disp_end);
- input_line_pointer = save_input_line_pointer;
if (exp->X_op == O_absent || exp->X_op == O_big)
{
#if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
if (exp->X_op != O_constant
-#ifdef BFD_ASSEMBLER
&& OUTPUT_FLAVOR == bfd_target_aout_flavour
-#endif
+ && exp_seg != absolute_section
&& exp_seg != text_section
&& exp_seg != data_section
&& exp_seg != bss_section
- && exp_seg != undefined_section)
+ && exp_seg != undefined_section
+ && !bfd_is_com_section (exp_seg))
{
-#ifdef BFD_ASSEMBLER
as_bad (_("unimplemented segment %s in operand"), exp_seg->name);
-#else
- as_bad (_("unimplemented segment type %d in operand"), exp_seg);
-#endif
return 0;
}
#endif
+ else if (flag_code == CODE_64BIT)
+ i.types[this_operand] |= Disp32S | Disp32;
return 1;
}
-static int i386_index_check PARAMS((const char *));
+static int i386_index_check PARAMS ((const char *));
/* Make sure the memory operand we've been dealt is valid.
Return 1 on success, 0 on a failure. */
i386_index_check (operand_string)
const char *operand_string;
{
+ int ok;
#if INFER_ADDR_PREFIX
int fudged = 0;
tryprefix:
#endif
- if (flag_16bit_code ^ (i.prefix[ADDR_PREFIX] != 0)
- /* 16 bit mode checks. */
- ? ((i.base_reg
- && ((i.base_reg->reg_type & (Reg16|BaseIndex))
- != (Reg16|BaseIndex)))
- || (i.index_reg
- && (((i.index_reg->reg_type & (Reg16|BaseIndex))
- != (Reg16|BaseIndex))
- || ! (i.base_reg
- && i.base_reg->reg_num < 6
- && i.index_reg->reg_num >= 6
- && i.log2_scale_factor == 0))))
- /* 32 bit mode checks. */
- : ((i.base_reg
- && (i.base_reg->reg_type & Reg32) == 0)
- || (i.index_reg
- && ((i.index_reg->reg_type & (Reg32|BaseIndex))
- != (Reg32|BaseIndex)))))
+ ok = 1;
+ if (flag_code == CODE_64BIT)
+ {
+ unsigned RegXX = (i.prefix[ADDR_PREFIX] == 0 ? Reg64 : Reg32);
+
+ if ((i.base_reg
+ && ((i.base_reg->reg_type & RegXX) == 0)
+ && (i.base_reg->reg_type != BaseIndex
+ || i.index_reg))
+ || (i.index_reg
+ && ((i.index_reg->reg_type & (RegXX | BaseIndex))
+ != (RegXX | BaseIndex))))
+ ok = 0;
+ }
+ else
+ {
+ if ((flag_code == CODE_16BIT) ^ (i.prefix[ADDR_PREFIX] != 0))
+ {
+ /* 16bit checks. */
+ if ((i.base_reg
+ && ((i.base_reg->reg_type & (Reg16 | BaseIndex | RegRex))
+ != (Reg16 | BaseIndex)))
+ || (i.index_reg
+ && (((i.index_reg->reg_type & (Reg16 | BaseIndex))
+ != (Reg16 | BaseIndex))
+ || !(i.base_reg
+ && i.base_reg->reg_num < 6
+ && i.index_reg->reg_num >= 6
+ && i.log2_scale_factor == 0))))
+ ok = 0;
+ }
+ else
+ {
+ /* 32bit checks. */
+ if ((i.base_reg
+ && (i.base_reg->reg_type & (Reg32 | RegRex)) != Reg32)
+ || (i.index_reg
+ && ((i.index_reg->reg_type & (Reg32 | BaseIndex | RegRex))
+ != (Reg32 | BaseIndex))))
+ ok = 0;
+ }
+ }
+ if (!ok)
{
#if INFER_ADDR_PREFIX
- if (i.prefix[ADDR_PREFIX] == 0 && stackop_size != '\0')
+ if (i.prefix[ADDR_PREFIX] == 0)
{
i.prefix[ADDR_PREFIX] = ADDR_PREFIX_OPCODE;
i.prefixes += 1;
FIXME. There doesn't seem to be any real need for separate
Disp16 and Disp32 flags. The same goes for Imm16 and Imm32.
Removing them would probably clean up the code quite a lot. */
- if (i.types[this_operand] & (Disp16|Disp32))
- i.types[this_operand] ^= (Disp16|Disp32);
+ if (flag_code != CODE_64BIT && (i.types[this_operand] & (Disp16 | Disp32)))
+ i.types[this_operand] ^= (Disp16 | Disp32);
fudged = 1;
goto tryprefix;
}
#endif
as_bad (_("`%s' is not a valid %s bit base/index expression"),
operand_string,
- flag_16bit_code ^ (i.prefix[ADDR_PREFIX] != 0) ? "16" : "32");
- return 0;
+ flag_code_names[flag_code]);
}
- return 1;
+ return ok;
}
/* Parse OPERAND_STRING into the i386_insn structure I. Returns non-zero
}
else if (is_digit_char (*op_string)
|| is_identifier_char (*op_string)
- || *op_string == '(' )
+ || *op_string == '(')
{
/* This is a memory reference of some sort. */
char *base_string;
if (is_space_char (*base_string))
++base_string;
}
- else if (*base_string != ')' )
+ else if (*base_string != ')')
{
as_bad (_("expecting `,' or `)' after index register in `%s'"),
operand_string);
}
/* Check for scale factor. */
- if (isdigit ((unsigned char) *base_string))
+ if (*base_string != ')')
{
- if (!i386_scale (base_string))
+ char *end_scale = i386_scale (base_string);
+
+ if (!end_scale)
return 0;
- ++base_string;
+ base_string = end_scale;
if (is_space_char (*base_string))
++base_string;
if (*base_string != ')')
int
md_estimate_size_before_relax (fragP, segment)
- register fragS *fragP;
- register segT segment;
+ fragS *fragP;
+ segT segment;
{
/* We've already got fragP->fr_subtype right; all we have to do is
check for un-relaxable symbols. On an ELF system, we can't relax
shared library. */
if (S_GET_SEGMENT (fragP->fr_symbol) != segment
#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
- || S_IS_EXTERNAL (fragP->fr_symbol)
- || S_IS_WEAK (fragP->fr_symbol)
+ || (OUTPUT_FLAVOR == bfd_target_elf_flavour
+ && (S_IS_EXTERNAL (fragP->fr_symbol)
+ || S_IS_WEAK (fragP->fr_symbol)))
#endif
)
{
/* Symbol is undefined in this segment, or we need to keep a
reloc so that weak symbols can be overridden. */
int size = (fragP->fr_subtype & CODE16) ? 2 : 4;
-#ifdef BFD_ASSEMBLER
enum bfd_reloc_code_real reloc_type;
-#else
- int reloc_type;
-#endif
unsigned char *opcode;
int old_fr_fix;
old_fr_fix = fragP->fr_fix;
opcode = (unsigned char *) fragP->fr_opcode;
- switch (opcode[0])
+ switch (TYPE_FROM_RELAX_STATE (fragP->fr_subtype))
{
- case JUMP_PC_RELATIVE:
- /* Make jmp (0xeb) a dword displacement jump. */
+ case UNCOND_JUMP:
+ /* Make jmp (0xeb) a (d)word displacement jump. */
opcode[0] = 0xe9;
fragP->fr_fix += size;
fix_new (fragP, old_fr_fix, size,
reloc_type);
break;
- default:
+ case COND_JUMP86:
+ if (size == 2
+ && (!no_cond_jump_promotion || fragP->fr_var != NO_RELOC))
+ {
+ /* Negate the condition, and branch past an
+ unconditional jump. */
+ opcode[0] ^= 1;
+ opcode[1] = 3;
+ /* Insert an unconditional jump. */
+ opcode[2] = 0xe9;
+ /* We added two extra opcode bytes, and have a two byte
+ offset. */
+ fragP->fr_fix += 2 + 2;
+ fix_new (fragP, old_fr_fix + 2, 2,
+ fragP->fr_symbol,
+ fragP->fr_offset, 1,
+ reloc_type);
+ break;
+ }
+ /* Fall through. */
+
+ case COND_JUMP:
+ if (no_cond_jump_promotion && fragP->fr_var == NO_RELOC)
+ {
+ fixS *fixP;
+
+ fragP->fr_fix += 1;
+ fixP = fix_new (fragP, old_fr_fix, 1,
+ fragP->fr_symbol,
+ fragP->fr_offset, 1,
+ BFD_RELOC_8_PCREL);
+ fixP->fx_signed = 1;
+ break;
+ }
+
/* This changes the byte-displacement jump 0x7N
- to the dword-displacement jump 0x0f,0x8N. */
+ to the (d)word-displacement jump 0x0f,0x8N. */
opcode[1] = opcode[0] + 0x10;
opcode[0] = TWO_BYTE_OPCODE_ESCAPE;
/* We've added an opcode byte. */
fragP->fr_offset, 1,
reloc_type);
break;
+
+ default:
+ BAD_CASE (fragP->fr_subtype);
+ break;
}
frag_wane (fragP);
return fragP->fr_fix - old_fr_fix;
}
- /* Guess a short jump. */
- return 1;
+
+ /* Guess size depending on current relax state. Initially the relax
+ state will correspond to a short jump and we return 1, because
+ the variable part of the frag (the branch offset) is one byte
+ long. However, we can relax a section more than once and in that
+ case we must either set fr_subtype back to the unrelaxed state,
+ or return the value for the appropriate branch. */
+ return md_relax_table[fragP->fr_subtype].rlx_length;
}
/* Called after relax() is finished.
Out: Any fixSs and constants are set up.
Caller will turn frag into a ".space 0". */
-#ifndef BFD_ASSEMBLER
-void
-md_convert_frag (headers, sec, fragP)
- object_headers *headers ATTRIBUTE_UNUSED;
- segT sec ATTRIBUTE_UNUSED;
- register fragS *fragP;
-#else
void
md_convert_frag (abfd, sec, fragP)
bfd *abfd ATTRIBUTE_UNUSED;
segT sec ATTRIBUTE_UNUSED;
- register fragS *fragP;
-#endif
+ fragS *fragP;
{
- register unsigned char *opcode;
+ unsigned char *opcode;
unsigned char *where_to_put_displacement = NULL;
offsetT target_address;
offsetT opcode_address;
/* Address we want to reach in file space. */
target_address = S_GET_VALUE (fragP->fr_symbol) + fragP->fr_offset;
-#ifdef BFD_ASSEMBLER
- /* Not needed otherwise? */
- target_address += symbol_get_frag (fragP->fr_symbol)->fr_address;
-#endif
/* Address opcode resides at in file space. */
opcode_address = fragP->fr_address + fragP->fr_fix;
/* Displacement from opcode start to fill into instruction. */
displacement_from_opcode_start = target_address - opcode_address;
- switch (fragP->fr_subtype)
+ if ((fragP->fr_subtype & BIG) == 0)
{
- case ENCODE_RELAX_STATE (COND_JUMP, SMALL):
- case ENCODE_RELAX_STATE (COND_JUMP, SMALL16):
- case ENCODE_RELAX_STATE (UNCOND_JUMP, SMALL):
- case ENCODE_RELAX_STATE (UNCOND_JUMP, SMALL16):
/* Don't have to change opcode. */
extension = 1; /* 1 opcode + 1 displacement */
where_to_put_displacement = &opcode[1];
- break;
+ }
+ else
+ {
+ if (no_cond_jump_promotion
+ && TYPE_FROM_RELAX_STATE (fragP->fr_subtype) != UNCOND_JUMP)
+ as_warn_where (fragP->fr_file, fragP->fr_line, _("long jump required"));
- case ENCODE_RELAX_STATE (COND_JUMP, BIG):
- extension = 5; /* 2 opcode + 4 displacement */
- opcode[1] = opcode[0] + 0x10;
- opcode[0] = TWO_BYTE_OPCODE_ESCAPE;
- where_to_put_displacement = &opcode[2];
- break;
+ switch (fragP->fr_subtype)
+ {
+ case ENCODE_RELAX_STATE (UNCOND_JUMP, BIG):
+ extension = 4; /* 1 opcode + 4 displacement */
+ opcode[0] = 0xe9;
+ where_to_put_displacement = &opcode[1];
+ break;
- case ENCODE_RELAX_STATE (UNCOND_JUMP, BIG):
- extension = 4; /* 1 opcode + 4 displacement */
- opcode[0] = 0xe9;
- where_to_put_displacement = &opcode[1];
- break;
+ case ENCODE_RELAX_STATE (UNCOND_JUMP, BIG16):
+ extension = 2; /* 1 opcode + 2 displacement */
+ opcode[0] = 0xe9;
+ where_to_put_displacement = &opcode[1];
+ break;
- case ENCODE_RELAX_STATE (COND_JUMP, BIG16):
- extension = 3; /* 2 opcode + 2 displacement */
- opcode[1] = opcode[0] + 0x10;
- opcode[0] = TWO_BYTE_OPCODE_ESCAPE;
- where_to_put_displacement = &opcode[2];
- break;
+ case ENCODE_RELAX_STATE (COND_JUMP, BIG):
+ case ENCODE_RELAX_STATE (COND_JUMP86, BIG):
+ extension = 5; /* 2 opcode + 4 displacement */
+ opcode[1] = opcode[0] + 0x10;
+ opcode[0] = TWO_BYTE_OPCODE_ESCAPE;
+ where_to_put_displacement = &opcode[2];
+ break;
- case ENCODE_RELAX_STATE (UNCOND_JUMP, BIG16):
- extension = 2; /* 1 opcode + 2 displacement */
- opcode[0] = 0xe9;
- where_to_put_displacement = &opcode[1];
- break;
+ case ENCODE_RELAX_STATE (COND_JUMP, BIG16):
+ extension = 3; /* 2 opcode + 2 displacement */
+ opcode[1] = opcode[0] + 0x10;
+ opcode[0] = TWO_BYTE_OPCODE_ESCAPE;
+ where_to_put_displacement = &opcode[2];
+ break;
- default:
- BAD_CASE (fragP->fr_subtype);
- break;
+ case ENCODE_RELAX_STATE (COND_JUMP86, BIG16):
+ extension = 4;
+ opcode[0] ^= 1;
+ opcode[1] = 3;
+ opcode[2] = 0xe9;
+ where_to_put_displacement = &opcode[3];
+ break;
+
+ default:
+ BAD_CASE (fragP->fr_subtype);
+ break;
+ }
}
+
/* Now put displacement after opcode. */
md_number_to_chars ((char *) where_to_put_displacement,
(valueT) (displacement_from_opcode_start - extension),
- SIZE_FROM_RELAX_STATE (fragP->fr_subtype));
+ DISP_SIZE_FROM_RELAX_STATE (fragP->fr_subtype));
fragP->fr_fix += extension;
}
\f
the same (little-endian) format, so we don't need to care about which
we are handling. */
-int
-md_apply_fix3 (fixP, valp, seg)
+void
+md_apply_fix3 (fixP, valP, seg)
/* The fix we're to put in. */
fixS *fixP;
-
/* Pointer to the value of the bits. */
- valueT *valp;
-
+ valueT *valP;
/* Segment fix is from. */
segT seg ATTRIBUTE_UNUSED;
{
- register char *p = fixP->fx_where + fixP->fx_frag->fr_literal;
- valueT value = *valp;
+ char *p = fixP->fx_where + fixP->fx_frag->fr_literal;
+ valueT value = *valP;
-#if defined (BFD_ASSEMBLER) && !defined (TE_Mach)
+#if !defined (TE_Mach)
if (fixP->fx_pcrel)
{
switch (fixP->fx_r_type)
}
}
- /* This is a hack. There should be a better way to handle this.
- This covers for the fact that bfd_install_relocation will
- subtract the current location (for partial_inplace, PC relative
- relocations); see more below. */
- if ((fixP->fx_r_type == BFD_RELOC_32_PCREL
- || fixP->fx_r_type == BFD_RELOC_16_PCREL
- || fixP->fx_r_type == BFD_RELOC_8_PCREL)
- && fixP->fx_addsy)
+ if (fixP->fx_addsy != NULL
+ && (fixP->fx_r_type == BFD_RELOC_32_PCREL
+ || fixP->fx_r_type == BFD_RELOC_16_PCREL
+ || fixP->fx_r_type == BFD_RELOC_8_PCREL)
+ && !use_rela_relocations)
{
+ /* This is a hack. There should be a better way to handle this.
+ This covers for the fact that bfd_install_relocation will
+ subtract the current location (for partial_inplace, PC relative
+ relocations); see more below. */
#ifndef OBJ_AOUT
if (OUTPUT_FLAVOR == bfd_target_elf_flavour
#ifdef TE_PE
#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
if (OUTPUT_FLAVOR == bfd_target_elf_flavour)
{
- segT fseg = S_GET_SEGMENT (fixP->fx_addsy);
+ segT sym_seg = S_GET_SEGMENT (fixP->fx_addsy);
- if ((fseg == seg
+ if ((sym_seg == seg
|| (symbol_section_p (fixP->fx_addsy)
- && fseg != absolute_section))
- && ! S_IS_EXTERNAL (fixP->fx_addsy)
- && ! S_IS_WEAK (fixP->fx_addsy)
- && S_IS_DEFINED (fixP->fx_addsy)
- && ! S_IS_COMMON (fixP->fx_addsy))
+ && sym_seg != absolute_section))
+ && !generic_force_reloc (fixP))
{
/* Yes, we add the values in twice. This is because
- bfd_perform_relocation subtracts them out again. I think
- bfd_perform_relocation is broken, but I don't dare change
+ bfd_install_relocation subtracts them out again. I think
+ bfd_install_relocation is broken, but I don't dare change
it. FIXME. */
value += fixP->fx_where + fixP->fx_frag->fr_address;
}
}
#endif
#if defined (OBJ_COFF) && defined (TE_PE)
- /* For some reason, the PE format does not store a section
- address offset for a PC relative symbol. */
- if (S_GET_SEGMENT (fixP->fx_addsy) != seg)
+ /* For some reason, the PE format does not store a
+ section address offset for a PC relative symbol. */
+ if (S_GET_SEGMENT (fixP->fx_addsy) != seg
+#if defined(BFD_ASSEMBLER) || defined(S_IS_WEAK)
+ || S_IS_WEAK (fixP->fx_addsy)
+#endif
+ )
value += md_pcrel_from (fixP);
#endif
}
/* Fix a few things - the dynamic linker expects certain values here,
- and we must not dissappoint it. */
+ and we must not disappoint it. */
#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
if (OUTPUT_FLAVOR == bfd_target_elf_flavour
&& fixP->fx_addsy)
switch (fixP->fx_r_type)
{
case BFD_RELOC_386_PLT32:
+ case BFD_RELOC_X86_64_PLT32:
/* Make the jump instruction point to the address of the operand. At
runtime we merely add the offset to the actual PLT entry. */
value = -4;
break;
- case BFD_RELOC_386_GOTPC:
-
-/* This is tough to explain. We end up with this one if we have
- * operands that look like "_GLOBAL_OFFSET_TABLE_+[.-.L284]". The goal
- * here is to obtain the absolute address of the GOT, and it is strongly
- * preferable from a performance point of view to avoid using a runtime
- * relocation for this. The actual sequence of instructions often look
- * something like:
- *
- * call .L66
- * .L66:
- * popl %ebx
- * addl $_GLOBAL_OFFSET_TABLE_+[.-.L66],%ebx
- *
- * The call and pop essentially return the absolute address of
- * the label .L66 and store it in %ebx. The linker itself will
- * ultimately change the first operand of the addl so that %ebx points to
- * the GOT, but to keep things simple, the .o file must have this operand
- * set so that it generates not the absolute address of .L66, but the
- * absolute address of itself. This allows the linker itself simply
- * treat a GOTPC relocation as asking for a pcrel offset to the GOT to be
- * added in, and the addend of the relocation is stored in the operand
- * field for the instruction itself.
- *
- * Our job here is to fix the operand so that it would add the correct
- * offset so that %ebx would point to itself. The thing that is tricky is
- * that .-.L66 will point to the beginning of the instruction, so we need
- * to further modify the operand so that it will point to itself.
- * There are other cases where you have something like:
- *
- * .long $_GLOBAL_OFFSET_TABLE_+[.-.L66]
- *
- * and here no correction would be required. Internally in the assembler
- * we treat operands of this form as not being pcrel since the '.' is
- * explicitly mentioned, and I wonder whether it would simplify matters
- * to do it this way. Who knows. In earlier versions of the PIC patches,
- * the pcrel_adjust field was used to store the correction, but since the
- * expression is not pcrel, I felt it would be confusing to do it this
- * way. */
-
- value -= 1;
+
+ case BFD_RELOC_386_TLS_GD:
+ case BFD_RELOC_386_TLS_LDM:
+ case BFD_RELOC_386_TLS_IE_32:
+ case BFD_RELOC_386_TLS_IE:
+ case BFD_RELOC_386_TLS_GOTIE:
+ case BFD_RELOC_X86_64_TLSGD:
+ case BFD_RELOC_X86_64_TLSLD:
+ case BFD_RELOC_X86_64_GOTTPOFF:
+ value = 0; /* Fully resolved at runtime. No addend. */
+ /* Fallthrough */
+ case BFD_RELOC_386_TLS_LE:
+ case BFD_RELOC_386_TLS_LDO_32:
+ case BFD_RELOC_386_TLS_LE_32:
+ case BFD_RELOC_X86_64_DTPOFF32:
+ case BFD_RELOC_X86_64_TPOFF32:
+ S_SET_THREAD_LOCAL (fixP->fx_addsy);
break;
+
case BFD_RELOC_386_GOT32:
+ case BFD_RELOC_X86_64_GOT32:
value = 0; /* Fully resolved at runtime. No addend. */
break;
- case BFD_RELOC_386_GOTOFF:
- break;
case BFD_RELOC_VTABLE_INHERIT:
case BFD_RELOC_VTABLE_ENTRY:
fixP->fx_done = 0;
- return 1;
+ return;
default:
break;
}
#endif /* defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) */
- *valp = value;
-#endif /* defined (BFD_ASSEMBLER) && !defined (TE_Mach) */
- md_number_to_chars (p, value, fixP->fx_size);
+ *valP = value;
+#endif /* !defined (TE_Mach) */
- return 1;
+ /* Are we finished with this relocation now? */
+ if (fixP->fx_addsy == NULL)
+ fixP->fx_done = 1;
+ else if (use_rela_relocations)
+ {
+ fixP->fx_no_overflow = 1;
+ /* Remember value for tc_gen_reloc. */
+ fixP->fx_addnumber = value;
+ value = 0;
+ }
+
+ md_number_to_chars (p, value, fixP->fx_size);
}
\f
#define MAX_LITTLENUMS 6
output_invalid (c)
int c;
{
- if (isprint (c))
+ if (ISPRINT (c))
sprintf (output_invalid_buf, "'%c'", c);
else
sprintf (output_invalid_buf, "(0x%x)", (unsigned) c);
}
}
+ if (r != NULL
+ && ((r->reg_flags & (RegRex64 | RegRex)) | (r->reg_type & Reg64)) != 0
+ && flag_code != CODE_64BIT)
+ return (const reg_entry *) NULL;
+
return r;
}
\f
#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
-const char *md_shortopts = "kVQ:sq";
+const char *md_shortopts = "kVQ:sqn";
#else
-const char *md_shortopts = "q";
+const char *md_shortopts = "qn";
#endif
+
struct option md_longopts[] = {
+#define OPTION_32 (OPTION_MD_BASE + 0)
+ {"32", no_argument, NULL, OPTION_32},
+#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
+#define OPTION_64 (OPTION_MD_BASE + 1)
+ {"64", no_argument, NULL, OPTION_64},
+#endif
{NULL, no_argument, NULL, 0}
};
size_t md_longopts_size = sizeof (md_longopts);
{
switch (c)
{
+ case 'n':
+ optimize_align_code = 0;
+ break;
+
case 'q':
quiet_warnings = 1;
break;
case 's':
/* -s: On i386 Solaris, this tells the native assembler to use
- .stab instead of .stab.excl. We always use .stab anyhow. */
+ .stab instead of .stab.excl. We always use .stab anyhow. */
+ break;
+
+ case OPTION_64:
+ {
+ const char **list, **l;
+
+ list = bfd_target_list ();
+ for (l = list; *l != NULL; l++)
+ if (strcmp (*l, "elf64-x86-64") == 0)
+ {
+ default_arch = "x86_64";
+ break;
+ }
+ if (*l == NULL)
+ as_fatal (_("No compiled in support for x86_64"));
+ free (list);
+ }
break;
#endif
+ case OPTION_32:
+ default_arch = "i386";
+ break;
+
default:
return 0;
}
-Q ignored\n\
-V print assembler version number\n\
-k ignored\n\
+ -n Do not optimize code alignment\n\
-q quieten some warnings\n\
-s ignored\n"));
#else
fprintf (stream, _("\
+ -n Do not optimize code alignment\n\
-q quieten some warnings\n"));
#endif
}
-#ifdef BFD_ASSEMBLER
-#if ((defined (OBJ_MAYBE_ELF) && defined (OBJ_MAYBE_COFF)) \
- || (defined (OBJ_MAYBE_ELF) && defined (OBJ_MAYBE_AOUT)) \
- || (defined (OBJ_MAYBE_COFF) && defined (OBJ_MAYBE_AOUT)))
+#if ((defined (OBJ_MAYBE_COFF) && defined (OBJ_MAYBE_AOUT)) \
+ || defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF))
/* Pick the target format to use. */
const char *
i386_target_format ()
{
+ if (!strcmp (default_arch, "x86_64"))
+ set_code_flag (CODE_64BIT);
+ else if (!strcmp (default_arch, "i386"))
+ set_code_flag (CODE_32BIT);
+ else
+ as_fatal (_("Unknown architecture"));
switch (OUTPUT_FLAVOR)
{
#ifdef OBJ_MAYBE_AOUT
case bfd_target_coff_flavour:
return "coff-i386";
#endif
-#ifdef OBJ_MAYBE_ELF
+#if defined (OBJ_MAYBE_ELF) || defined (OBJ_ELF)
case bfd_target_elf_flavour:
- return "elf32-i386";
+ {
+ if (flag_code == CODE_64BIT)
+ use_rela_relocations = 1;
+ return flag_code == CODE_64BIT ? "elf64-x86-64" : ELF_TARGET_FORMAT;
+ }
#endif
default:
abort ();
}
#endif /* OBJ_MAYBE_ more than one */
-#endif /* BFD_ASSEMBLER */
+
+#if (defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF))
+void i386_elf_emit_arch_note ()
+{
+ if (OUTPUT_FLAVOR == bfd_target_elf_flavour
+ && cpu_arch_name != NULL)
+ {
+ char *p;
+ asection *seg = now_seg;
+ subsegT subseg = now_subseg;
+ Elf_Internal_Note i_note;
+ Elf_External_Note e_note;
+ asection *note_secp;
+ int len;
+
+ /* Create the .note section. */
+ note_secp = subseg_new (".note", 0);
+ bfd_set_section_flags (stdoutput,
+ note_secp,
+ SEC_HAS_CONTENTS | SEC_READONLY);
+
+ /* Process the arch string. */
+ len = strlen (cpu_arch_name);
+
+ i_note.namesz = len + 1;
+ i_note.descsz = 0;
+ i_note.type = NT_ARCH;
+ p = frag_more (sizeof (e_note.namesz));
+ md_number_to_chars (p, (valueT) i_note.namesz, sizeof (e_note.namesz));
+ p = frag_more (sizeof (e_note.descsz));
+ md_number_to_chars (p, (valueT) i_note.descsz, sizeof (e_note.descsz));
+ p = frag_more (sizeof (e_note.type));
+ md_number_to_chars (p, (valueT) i_note.type, sizeof (e_note.type));
+ p = frag_more (len + 1);
+ strcpy (p, cpu_arch_name);
+
+ frag_align (2, 0, 0);
+
+ subseg_set (seg, subseg);
+ }
+}
+#endif
\f
symbolS *
md_undefined_symbol (name)
segT segment ATTRIBUTE_UNUSED;
valueT size;
{
-#ifdef BFD_ASSEMBLER
#if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
if (OUTPUT_FLAVOR == bfd_target_aout_flavour)
{
align = bfd_get_section_alignment (stdoutput, segment);
size = ((size + (1 << align) - 1) & ((valueT) -1 << align));
}
-#endif
#endif
return size;
s_bss (ignore)
int ignore ATTRIBUTE_UNUSED;
{
- register int temp;
+ int temp;
temp = get_absolute_expression ();
subseg_set (bss_section, (subsegT) temp);
#endif
-#ifdef BFD_ASSEMBLER
-
void
i386_validate_fix (fixp)
fixS *fixp;
{
if (fixp->fx_subsy && fixp->fx_subsy == GOT_symbol)
{
- fixp->fx_r_type = BFD_RELOC_386_GOTOFF;
+ /* GOTOFF relocation are nonsense in 64bit mode. */
+ if (fixp->fx_r_type == BFD_RELOC_32_PCREL)
+ {
+ if (flag_code != CODE_64BIT)
+ abort ();
+ fixp->fx_r_type = BFD_RELOC_X86_64_GOTPCREL;
+ }
+ else
+ {
+ if (flag_code == CODE_64BIT)
+ abort ();
+ fixp->fx_r_type = BFD_RELOC_386_GOTOFF;
+ }
fixp->fx_subsy = 0;
}
}
switch (fixp->fx_r_type)
{
+ case BFD_RELOC_X86_64_PLT32:
+ case BFD_RELOC_X86_64_GOT32:
+ case BFD_RELOC_X86_64_GOTPCREL:
case BFD_RELOC_386_PLT32:
case BFD_RELOC_386_GOT32:
case BFD_RELOC_386_GOTOFF:
case BFD_RELOC_386_GOTPC:
+ case BFD_RELOC_386_TLS_GD:
+ case BFD_RELOC_386_TLS_LDM:
+ case BFD_RELOC_386_TLS_LDO_32:
+ case BFD_RELOC_386_TLS_IE_32:
+ case BFD_RELOC_386_TLS_IE:
+ case BFD_RELOC_386_TLS_GOTIE:
+ case BFD_RELOC_386_TLS_LE_32:
+ case BFD_RELOC_386_TLS_LE:
+ case BFD_RELOC_X86_64_32S:
+ case BFD_RELOC_X86_64_TLSGD:
+ case BFD_RELOC_X86_64_TLSLD:
+ case BFD_RELOC_X86_64_DTPOFF32:
+ case BFD_RELOC_X86_64_GOTTPOFF:
+ case BFD_RELOC_X86_64_TPOFF32:
case BFD_RELOC_RVA:
case BFD_RELOC_VTABLE_ENTRY:
case BFD_RELOC_VTABLE_INHERIT:
+#ifdef TE_PE
+ case BFD_RELOC_32_SECREL:
+#endif
code = fixp->fx_r_type;
break;
default:
switch (fixp->fx_size)
{
default:
- as_bad (_("can not do %d byte pc-relative relocation"),
- fixp->fx_size);
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("can not do %d byte pc-relative relocation"),
+ fixp->fx_size);
code = BFD_RELOC_32_PCREL;
break;
case 1: code = BFD_RELOC_8_PCREL; break;
switch (fixp->fx_size)
{
default:
- as_bad (_("can not do %d byte relocation"), fixp->fx_size);
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("can not do %d byte relocation"),
+ fixp->fx_size);
code = BFD_RELOC_32;
break;
case 1: code = BFD_RELOC_8; break;
case 2: code = BFD_RELOC_16; break;
case 4: code = BFD_RELOC_32; break;
+#ifdef BFD64
+ case 8: code = BFD_RELOC_64; break;
+#endif
}
}
break;
if (code == BFD_RELOC_32
&& GOT_symbol
&& fixp->fx_addsy == GOT_symbol)
- code = BFD_RELOC_386_GOTPC;
+ {
+ /* We don't support GOTPC on 64bit targets. */
+ if (flag_code == CODE_64BIT)
+ abort ();
+ code = BFD_RELOC_386_GOTPC;
+ }
rel = (arelent *) xmalloc (sizeof (arelent));
rel->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
*rel->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
rel->address = fixp->fx_frag->fr_address + fixp->fx_where;
- /* HACK: Since i386 ELF uses Rel instead of Rela, encode the
- vtable entry to be used in the relocation's section offset. */
- if (fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
- rel->address = fixp->fx_offset;
- if (fixp->fx_pcrel)
- rel->addend = fixp->fx_addnumber;
+ if (!use_rela_relocations)
+ {
+ /* HACK: Since i386 ELF uses Rel instead of Rela, encode the
+ vtable entry to be used in the relocation's section offset. */
+ if (fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
+ rel->address = fixp->fx_offset;
+
+ rel->addend = 0;
+ }
+ /* Use the rela in 64bit mode. */
else
- rel->addend = 0;
+ {
+ if (!fixp->fx_pcrel)
+ rel->addend = fixp->fx_offset;
+ else
+ switch (code)
+ {
+ case BFD_RELOC_X86_64_PLT32:
+ case BFD_RELOC_X86_64_GOT32:
+ case BFD_RELOC_X86_64_GOTPCREL:
+ case BFD_RELOC_X86_64_TLSGD:
+ case BFD_RELOC_X86_64_TLSLD:
+ case BFD_RELOC_X86_64_GOTTPOFF:
+ rel->addend = fixp->fx_offset - fixp->fx_size;
+ break;
+ default:
+ rel->addend = (section->vma
+ - fixp->fx_size
+ + fixp->fx_addnumber
+ + md_pcrel_from (fixp));
+ break;
+ }
+ }
rel->howto = bfd_reloc_type_lookup (stdoutput, code);
if (rel->howto == NULL)
return rel;
}
-#else /* ! BFD_ASSEMBLER */
-
-#if (defined(OBJ_AOUT) | defined(OBJ_BOUT))
-void
-tc_aout_fix_to_chars (where, fixP, segment_address_in_file)
- char *where;
- fixS *fixP;
- relax_addressT segment_address_in_file;
-{
- /* In: length of relocation (or of address) in chars: 1, 2 or 4.
- Out: GNU LD relocation length code: 0, 1, or 2. */
-
- static const unsigned char nbytes_r_length[] = { 42, 0, 1, 42, 2 };
- long r_symbolnum;
-
- know (fixP->fx_addsy != NULL);
-
- md_number_to_chars (where,
- (valueT) (fixP->fx_frag->fr_address
- + fixP->fx_where - segment_address_in_file),
- 4);
-
- r_symbolnum = (S_IS_DEFINED (fixP->fx_addsy)
- ? S_GET_TYPE (fixP->fx_addsy)
- : fixP->fx_addsy->sy_number);
-
- where[6] = (r_symbolnum >> 16) & 0x0ff;
- where[5] = (r_symbolnum >> 8) & 0x0ff;
- where[4] = r_symbolnum & 0x0ff;
- where[7] = ((((!S_IS_DEFINED (fixP->fx_addsy)) << 3) & 0x08)
- | ((nbytes_r_length[fixP->fx_size] << 1) & 0x06)
- | (((fixP->fx_pcrel << 0) & 0x01) & 0x0f));
-}
-
-#endif /* OBJ_AOUT or OBJ_BOUT. */
-
-#if defined (I386COFF)
-
-short
-tc_coff_fix2rtype (fixP)
- fixS *fixP;
-{
- if (fixP->fx_r_type == R_IMAGEBASE)
- return R_IMAGEBASE;
-
- return (fixP->fx_pcrel ?
- (fixP->fx_size == 1 ? R_PCRBYTE :
- fixP->fx_size == 2 ? R_PCRWORD :
- R_PCRLONG) :
- (fixP->fx_size == 1 ? R_RELBYTE :
- fixP->fx_size == 2 ? R_RELWORD :
- R_DIR32));
-}
-
-int
-tc_coff_sizemachdep (frag)
- fragS *frag;
-{
- if (frag->fr_next)
- return (frag->fr_next->fr_address - frag->fr_address);
- else
- return 0;
-}
-
-#endif /* I386COFF */
-
-#endif /* ! BFD_ASSEMBLER */
\f
/* Parse operands using Intel syntax. This implements a recursive descent
parser based on the BNF grammar published in Appendix B of the MASM 6.1
alpha [a-zA-Z]
+ binOp & | AND | \| | OR | ^ | XOR
+
byteRegister AL | AH | BL | BH | CL | CH | DL | DH
constant digits [[ radixOverride ]]
- dataType BYTE | WORD | DWORD | QWORD | XWORD
+ dataType BYTE | WORD | DWORD | FWORD | QWORD | TBYTE | OWORD | XMMWORD
digits decdigit
- | digits decdigit
- | digits hexdigit
+ | digits decdigit
+ | digits hexdigit
decdigit [0-9]
- e05 e05 addOp e06
- | e06
+ e04 e04 addOp e05
+ | e05
+
+ e05 e05 binOp e06
+ | e06
e06 e06 mulOp e09
- | e09
+ | e09
e09 OFFSET e10
+ | ~ e10
+ | NOT e10
| e09 PTR e10
| e09 : e10
| e10
e10 e10 [ expr ]
- | e11
+ | e11
e11 ( expr )
- | [ expr ]
+ | [ expr ]
| constant
| dataType
| id
| $
| register
- => expr SHORT e05
- | e05
+ => expr SHORT e04
+ | e04
gpRegister AX | EAX | BX | EBX | CX | ECX | DX | EDX
- | BP | EBP | SP | ESP | DI | EDI | SI | ESI
+ | BP | EBP | SP | ESP | DI | EDI | SI | ESI
hexdigit a | b | c | d | e | f
- | A | B | C | D | E | F
+ | A | B | C | D | E | F
id alpha
- | id alpha
+ | id alpha
| id decdigit
- mulOp * | / | MOD
+ mulOp * | / | % | MOD | << | SHL | >> | SHR
quote " | '
register specialRegister
- | gpRegister
+ | gpRegister
| byteRegister
segmentRegister CS | DS | ES | FS | GS | SS
- specialRegister CR0 | CR2 | CR3
- | DR0 | DR1 | DR2 | DR3 | DR6 | DR7
+ specialRegister CR0 | CR2 | CR3 | CR4
+ | DR0 | DR1 | DR2 | DR3 | DR6 | DR7
| TR3 | TR4 | TR5 | TR6 | TR7
We simplify the grammar in obvious places (e.g., register parsing is
done by calling parse_register) and eliminate immediate left recursion
to implement a recursive-descent parser.
- expr SHORT e05
- | e05
+ expr SHORT e04
+ | e04
+
+ e04 e05 e04'
+
+ e04' addOp e05 e04'
+ | Empty
e05 e06 e05'
- e05' addOp e06 e05'
- | Empty
+ e05' binOp e06 e05'
+ | Empty
e06 e09 e06'
e06' mulOp e09 e06'
- | Empty
+ | Empty
e09 OFFSET e10 e09'
- | e10 e09'
+ | ~ e10
+ | NOT e10
+ | e10 e09'
e09' PTR e10 e09'
- | : e10 e09'
+ | : e10 e09'
| Empty
e10 e11 e10'
e10' [ expr ] e10'
- | Empty
+ | Empty
e11 ( expr )
- | [ expr ]
+ | [ expr ]
| BYTE
| WORD
| DWORD
+ | FWORD
| QWORD
- | XWORD
+ | TBYTE
+ | OWORD
+ | XMMWORD
| .
| $
| register
static struct intel_token cur_token, prev_token;
-/* Token codes for the intel parser. */
+/* Token codes for the intel parser. Since T_SHORT is already used
+ by COFF, undefine it first to prevent a warning. */
#define T_NIL -1
#define T_CONST 1
#define T_REG 2
#define T_BYTE 3
#define T_WORD 4
-#define T_DWORD 5
-#define T_QWORD 6
-#define T_XWORD 7
-#define T_SHORT 8
-#define T_OFFSET 9
-#define T_PTR 10
-#define T_ID 11
+#define T_DWORD 5
+#define T_FWORD 6
+#define T_QWORD 7
+#define T_TBYTE 8
+#define T_XMMWORD 9
+#undef T_SHORT
+#define T_SHORT 10
+#define T_OFFSET 11
+#define T_PTR 12
+#define T_ID 13
+#define T_SHL 14
+#define T_SHR 15
/* Prototypes for intel parser functions. */
static int intel_match_token PARAMS ((int code));
static void intel_get_token PARAMS ((void));
static void intel_putback_token PARAMS ((void));
static int intel_expr PARAMS ((void));
+static int intel_e04 PARAMS ((void));
+static int intel_e04_1 PARAMS ((void));
static int intel_e05 PARAMS ((void));
static int intel_e05_1 PARAMS ((void));
static int intel_e06 PARAMS ((void));
cur_token.str = prev_token.str = NULL;
/* Initialize parser structure. */
- p = intel_parser.op_string = (char *)malloc (strlen (operand_string) + 1);
+ p = intel_parser.op_string = (char *) malloc (strlen (operand_string) + 1);
if (p == NULL)
abort ();
strcpy (intel_parser.op_string, operand_string);
intel_parser.op_modifier = -1;
intel_parser.is_mem = 0;
intel_parser.reg = NULL;
- intel_parser.disp = (char *)malloc (strlen (operand_string) + 1);
+ intel_parser.disp = (char *) malloc (strlen (operand_string) + 1);
if (intel_parser.disp == NULL)
abort ();
intel_parser.disp[0] = '\0';
if (ret)
{
+ if (cur_token.code != T_NIL)
+ {
+ as_bad (_("invalid operand for '%s' ('%s' unexpected)"),
+ current_templates->start->name, cur_token.str);
+ ret = 0;
+ }
/* If we found a memory reference, hand it over to i386_displacement
to fill in the rest of the operand fields. */
- if (intel_parser.is_mem)
+ else if (intel_parser.is_mem)
{
if ((i.mem_operands == 1
&& (current_templates->start->opcode_modifier & IsString) == 0)
/* Add the displacement expression. */
if (*s != '\0')
- ret = i386_displacement (s, s + strlen (s))
- && i386_index_check (s);
+ ret = i386_displacement (s, s + strlen (s));
+ if (ret)
+ ret = i386_index_check (operand_string);
}
}
/* Constant and OFFSET expressions are handled by i386_immediate. */
- else if (intel_parser.op_modifier == OFFSET_FLAT
+ else if (intel_parser.op_modifier == T_OFFSET
|| intel_parser.reg == NULL)
ret = i386_immediate (intel_parser.disp);
}
return ret;
}
-/* expr SHORT e05
- | e05 */
+/* expr SHORT e04
+ | e04 */
static int
intel_expr ()
{
- /* expr SHORT e05 */
+ /* expr SHORT e04 */
if (cur_token.code == T_SHORT)
{
- intel_parser.op_modifier = SHORT;
+ intel_parser.op_modifier = T_SHORT;
intel_match_token (T_SHORT);
- return (intel_e05 ());
+ return (intel_e04 ());
+ }
+
+ /* expr e04 */
+ else
+ return intel_e04 ();
+}
+
+/* e04 e06 e04'
+
+ e04' addOp e06 e04'
+ | Empty */
+static int
+intel_e04 ()
+{
+ return (intel_e05 () && intel_e04_1 ());
+}
+
+static int
+intel_e04_1 ()
+{
+ /* e04' addOp e05 e04' */
+ if (cur_token.code == '+' || cur_token.code == '-')
+ {
+ char str[2];
+
+ str[0] = cur_token.code;
+ str[1] = 0;
+ strcat (intel_parser.disp, str);
+ intel_match_token (cur_token.code);
+
+ return (intel_e05 () && intel_e04_1 ());
}
- /* expr e05 */
+ /* e04' Empty */
else
- return intel_e05 ();
+ return 1;
}
/* e05 e06 e05'
- e05' addOp e06 e05'
+ e05' binOp e06 e05'
| Empty */
static int
intel_e05 ()
static int
intel_e05_1 ()
{
- /* e05' addOp e06 e05' */
- if (cur_token.code == '+' || cur_token.code == '-')
+ /* e05' binOp e06 e05' */
+ if (cur_token.code == '&' || cur_token.code == '|' || cur_token.code == '^')
{
- strcat (intel_parser.disp, cur_token.str);
+ char str[2];
+
+ str[0] = cur_token.code;
+ str[1] = 0;
+ strcat (intel_parser.disp, str);
intel_match_token (cur_token.code);
return (intel_e06 () && intel_e05_1 ());
/* e06 e09 e06'
e06' mulOp e09 e06'
- | Empty */
+ | Empty */
static int
intel_e06 ()
{
intel_e06_1 ()
{
/* e06' mulOp e09 e06' */
- if (cur_token.code == '*' || cur_token.code == '/')
+ if (cur_token.code == '*' || cur_token.code == '/' || cur_token.code == '%')
{
- strcat (intel_parser.disp, cur_token.str);
+ char str[2];
+
+ str[0] = cur_token.code;
+ str[1] = 0;
+ strcat (intel_parser.disp, str);
+ intel_match_token (cur_token.code);
+
+ return (intel_e09 () && intel_e06_1 ());
+ }
+ else if (cur_token.code == T_SHL)
+ {
+ strcat (intel_parser.disp, "<<");
+ intel_match_token (cur_token.code);
+
+ return (intel_e09 () && intel_e06_1 ());
+ }
+ else if (cur_token.code == T_SHR)
+ {
+ strcat (intel_parser.disp, ">>");
intel_match_token (cur_token.code);
return (intel_e09 () && intel_e06_1 ());
}
/* e09 OFFSET e10 e09'
- | e10 e09'
+ | e10 e09'
+
+ e09 ~ e10 e09'
+ | NOT e10 e09'
+ | e10 e09'
e09' PTR e10 e09'
- | : e10 e09'
+ | : e10 e09'
| Empty */
static int
intel_e09 ()
if (cur_token.code == T_OFFSET)
{
intel_parser.is_mem = 0;
- intel_parser.op_modifier = OFFSET_FLAT;
+ intel_parser.op_modifier = T_OFFSET;
intel_match_token (T_OFFSET);
return (intel_e10 () && intel_e09_1 ());
}
+ /* e09 NOT e10 e09' */
+ else if (cur_token.code == '~')
+ {
+ char str[2];
+
+ str[0] = cur_token.code;
+ str[1] = 0;
+ strcat (intel_parser.disp, str);
+ intel_match_token (cur_token.code);
+
+ return (intel_e10 () && intel_e09_1 ());
+ }
+
/* e09 e10 e09' */
else
return (intel_e10 () && intel_e09_1 ());
/* e09' PTR e10 e09' */
if (cur_token.code == T_PTR)
{
+ char suffix;
+
if (prev_token.code == T_BYTE)
- i.suffix = BYTE_MNEM_SUFFIX;
+ suffix = BYTE_MNEM_SUFFIX;
else if (prev_token.code == T_WORD)
{
- if (intel_parser.got_a_float == 2) /* "fi..." */
- i.suffix = SHORT_MNEM_SUFFIX;
+ if (current_templates->start->name[0] == 'l'
+ && current_templates->start->name[2] == 's'
+ && current_templates->start->name[3] == 0)
+ suffix = BYTE_MNEM_SUFFIX; /* so it will cause an error */
+ else if (intel_parser.got_a_float == 2) /* "fi..." */
+ suffix = SHORT_MNEM_SUFFIX;
else
- i.suffix = WORD_MNEM_SUFFIX;
+ suffix = WORD_MNEM_SUFFIX;
}
else if (prev_token.code == T_DWORD)
{
- if (intel_parser.got_a_float == 1) /* "f..." */
- i.suffix = SHORT_MNEM_SUFFIX;
+ if (current_templates->start->name[0] == 'l'
+ && current_templates->start->name[2] == 's'
+ && current_templates->start->name[3] == 0)
+ suffix = WORD_MNEM_SUFFIX;
+ else if (flag_code == CODE_16BIT
+ && (current_templates->start->opcode_modifier
+ & (Jump|JumpDword|JumpInterSegment)))
+ suffix = LONG_DOUBLE_MNEM_SUFFIX;
+ else if (intel_parser.got_a_float == 1) /* "f..." */
+ suffix = SHORT_MNEM_SUFFIX;
else
- i.suffix = LONG_MNEM_SUFFIX;
+ suffix = LONG_MNEM_SUFFIX;
+ }
+
+ else if (prev_token.code == T_FWORD)
+ {
+ if (current_templates->start->name[0] == 'l'
+ && current_templates->start->name[2] == 's'
+ && current_templates->start->name[3] == 0)
+ suffix = LONG_MNEM_SUFFIX;
+ else if (!intel_parser.got_a_float)
+ {
+ if (flag_code == CODE_16BIT)
+ add_prefix (DATA_PREFIX_OPCODE);
+ suffix = LONG_DOUBLE_MNEM_SUFFIX;
+ }
+ else
+ suffix = BYTE_MNEM_SUFFIX; /* so it will cause an error */
}
else if (prev_token.code == T_QWORD)
- i.suffix = DWORD_MNEM_SUFFIX;
+ {
+ if (intel_parser.got_a_float == 1) /* "f..." */
+ suffix = LONG_MNEM_SUFFIX;
+ else
+ suffix = QWORD_MNEM_SUFFIX;
+ }
+
+ else if (prev_token.code == T_TBYTE)
+ {
+ if (intel_parser.got_a_float == 1)
+ suffix = LONG_DOUBLE_MNEM_SUFFIX;
+ else
+ suffix = BYTE_MNEM_SUFFIX; /* so it will cause an error */
+ }
- else if (prev_token.code == T_XWORD)
- i.suffix = LONG_DOUBLE_MNEM_SUFFIX;
+ else if (prev_token.code == T_XMMWORD)
+ {
+ /* XXX ignored for now, but accepted since gcc uses it */
+ suffix = 0;
+ }
else
{
- as_bad (_("Unknown operand modifier `%s'\n"), prev_token.str);
+ as_bad (_("Unknown operand modifier `%s'"), prev_token.str);
+ return 0;
+ }
+
+ if (current_templates->start->base_opcode == 0x8d /* lea */)
+ ;
+ else if (!i.suffix)
+ i.suffix = suffix;
+ else if (i.suffix != suffix)
+ {
+ as_bad (_("Conflicting operand modifiers"));
return 0;
}
/* e09 : e10 e09' */
else if (cur_token.code == ':')
{
- intel_parser.is_mem = 1;
+ /* Mark as a memory operand only if it's not already known to be an
+ offset expression. */
+ if (intel_parser.op_modifier != T_OFFSET)
+ intel_parser.is_mem = 1;
return (intel_match_token (':') && intel_e10 () && intel_e09_1 ());
}
/* e10 e11 e10'
e10' [ expr ] e10'
- | Empty */
+ | Empty */
static int
intel_e10 ()
{
if (cur_token.code == '[')
{
intel_match_token ('[');
- intel_parser.is_mem = 1;
+
+ /* Mark as a memory operand only if it's not already known to be an
+ offset expression. If it's an offset expression, we need to keep
+ the brace in. */
+ if (intel_parser.op_modifier != T_OFFSET)
+ intel_parser.is_mem = 1;
+ else
+ strcat (intel_parser.disp, "[");
/* Add a '+' to the displacement string if necessary. */
- if (*intel_parser.disp != '\0')
+ if (*intel_parser.disp != '\0'
+ && *(intel_parser.disp + strlen (intel_parser.disp) - 1) != '+')
strcat (intel_parser.disp, "+");
- return (intel_expr () && intel_match_token (']') && intel_e10_1 ());
+ if (intel_expr () && intel_match_token (']'))
+ {
+ /* Preserve brackets when the operand is an offset expression. */
+ if (intel_parser.op_modifier == T_OFFSET)
+ strcat (intel_parser.disp, "]");
+
+ return intel_e10_1 ();
+ }
+ else
+ return 0;
}
/* e10' Empty */
}
/* e11 ( expr )
- | [ expr ]
+ | [ expr ]
| BYTE
| WORD
| DWORD
+ | FWORD
| QWORD
- | XWORD
+ | TBYTE
+ | OWORD
+ | XMMWORD
| $
| .
| register
strcat (intel_parser.disp, "(");
if (intel_expr () && intel_match_token (')'))
- {
- strcat (intel_parser.disp, ")");
- return 1;
- }
+ {
+ strcat (intel_parser.disp, ")");
+ return 1;
+ }
else
return 0;
}
else if (cur_token.code == '[')
{
intel_match_token ('[');
- intel_parser.is_mem = 1;
+
+ /* Mark as a memory operand only if it's not already known to be an
+ offset expression. If it's an offset expression, we need to keep
+ the brace in. */
+ if (intel_parser.op_modifier != T_OFFSET)
+ intel_parser.is_mem = 1;
+ else
+ strcat (intel_parser.disp, "[");
/* Operands for jump/call inside brackets denote absolute addresses. */
- if (current_templates->start->opcode_modifier & Jump
- || current_templates->start->opcode_modifier & JumpDword
- || current_templates->start->opcode_modifier & JumpByte
- || current_templates->start->opcode_modifier & JumpInterSegment)
+ if (current_templates->start->opcode_modifier
+ & (Jump|JumpDword|JumpByte|JumpInterSegment))
i.types[this_operand] |= JumpAbsolute;
/* Add a '+' to the displacement string if necessary. */
- if (*intel_parser.disp != '\0')
+ if (*intel_parser.disp != '\0'
+ && *(intel_parser.disp + strlen (intel_parser.disp) - 1) != '+')
strcat (intel_parser.disp, "+");
- return (intel_expr () && intel_match_token (']'));
+ if (intel_expr () && intel_match_token (']'))
+ {
+ /* Preserve brackets when the operand is an offset expression. */
+ if (intel_parser.op_modifier == T_OFFSET)
+ strcat (intel_parser.disp, "]");
+
+ return 1;
+ }
+ else
+ return 0;
}
/* e11 BYTE
| WORD
| DWORD
+ | FWORD
| QWORD
- | XWORD */
+ | TBYTE
+ | OWORD
+ | XMMWORD */
else if (cur_token.code == T_BYTE
|| cur_token.code == T_WORD
|| cur_token.code == T_DWORD
+ || cur_token.code == T_FWORD
|| cur_token.code == T_QWORD
- || cur_token.code == T_XWORD)
+ || cur_token.code == T_TBYTE
+ || cur_token.code == T_XMMWORD)
{
intel_match_token (cur_token.code);
/* e11 $
| . */
- else if (cur_token.code == '$' || cur_token.code == '.')
+ else if (cur_token.code == '.')
{
strcat (intel_parser.disp, cur_token.str);
intel_match_token (cur_token.code);
- intel_parser.is_mem = 1;
+
+ /* Mark as a memory operand only if it's not already known to be an
+ offset expression. */
+ if (intel_parser.op_modifier != T_OFFSET)
+ intel_parser.is_mem = 1;
return 1;
}
{
if (i.base_reg && i.index_reg)
{
- as_bad (_("Too many register references in memory operand.\n"));
+ as_bad (_("Too many register references in memory operand."));
return 0;
}
/* Offset modifier. Add the register to the displacement string to be
parsed as an immediate expression after we're done. */
- else if (intel_parser.op_modifier == OFFSET_FLAT)
+ else if (intel_parser.op_modifier == T_OFFSET)
strcat (intel_parser.disp, reg->reg_name);
/* It's neither base nor index nor offset. */
when we're parsing offset operands), we may need to remove any
preceding '+' from the displacement string. */
if (*intel_parser.disp != '\0'
- && intel_parser.op_modifier != OFFSET_FLAT)
+ && intel_parser.op_modifier != T_OFFSET)
{
char *s = intel_parser.disp;
s += strlen (s) - 1;
{
/* Add the identifier to the displacement string. */
strcat (intel_parser.disp, cur_token.str);
- intel_match_token (T_ID);
/* The identifier represents a memory reference only if it's not
- preceded by an offset modifier. */
- if (intel_parser.op_modifier != OFFSET_FLAT
- && intel_parser.op_modifier != FLAT)
- intel_parser.is_mem = 1;
+ preceded by an offset modifier and if it's not an equate. */
+ if (intel_parser.op_modifier != T_OFFSET)
+ {
+ symbolS *symbolP;
+
+ symbolP = symbol_find(cur_token.str);
+ if (!symbolP || S_GET_SEGMENT(symbolP) != absolute_section)
+ intel_parser.is_mem = 1;
+ }
+ intel_match_token (T_ID);
return 1;
}
/* e11 constant */
else if (cur_token.code == T_CONST
- || cur_token.code == '-'
+ || cur_token.code == '-'
|| cur_token.code == '+')
{
char *save_str;
intel_match_token (cur_token.code);
if (cur_token.code != T_CONST)
{
- as_bad (_("Syntax error. Expecting a constant. Got `%s'.\n"),
+ as_bad (_("Syntax error. Expecting a constant. Got `%s'."),
cur_token.str);
return 0;
}
}
- save_str = (char *)malloc (strlen (cur_token.str) + 1);
+ save_str = (char *) malloc (strlen (cur_token.str) + 1);
if (save_str == NULL)
abort ();
strcpy (save_str, cur_token.str);
token from the operand string. */
static int
intel_match_token (code)
- int code;
+ int code;
{
if (cur_token.code == code)
{
}
else
{
- as_bad (_("Unexpected token `%s'\n"), cur_token.str);
+ as_bad (_("Unexpected token `%s'"), cur_token.str);
return 0;
}
}
/* The new token cannot be larger than the remainder of the operand
string. */
- new_token.str = (char *)malloc (strlen (intel_parser.op_string) + 1);
+ new_token.str = (char *) malloc (strlen (intel_parser.op_string) + 1);
if (new_token.str == NULL)
abort ();
new_token.str[0] = '\0';
new_token.code = T_ID;
}
- else if (strchr ("+-/*:[]()", *intel_parser.op_string))
- {
- new_token.code = *intel_parser.op_string;
- new_token.str[0] = *intel_parser.op_string;
- new_token.str[1] = '\0';
- }
-
else if ((*intel_parser.op_string == REGISTER_PREFIX || allow_naked_reg)
&& ((reg = parse_register (intel_parser.op_string, &end_op)) != NULL))
{
Otherwise, it's operator '.' followed by an expression. */
if ((*q == '.' || *q == '$') && !is_identifier_char (*(q + 1)))
{
- new_token.code = *q;
- new_token.str[0] = *q;
+ new_token.code = '.';
+ new_token.str[0] = '.';
new_token.str[1] = '\0';
}
else
*p++ = *q++;
*p = '\0';
- if (strcasecmp (new_token.str, "BYTE") == 0)
+ if (strcasecmp (new_token.str, "NOT") == 0)
+ new_token.code = '~';
+
+ else if (strcasecmp (new_token.str, "MOD") == 0)
+ new_token.code = '%';
+
+ else if (strcasecmp (new_token.str, "AND") == 0)
+ new_token.code = '&';
+
+ else if (strcasecmp (new_token.str, "OR") == 0)
+ new_token.code = '|';
+
+ else if (strcasecmp (new_token.str, "XOR") == 0)
+ new_token.code = '^';
+
+ else if (strcasecmp (new_token.str, "SHL") == 0)
+ new_token.code = T_SHL;
+
+ else if (strcasecmp (new_token.str, "SHR") == 0)
+ new_token.code = T_SHR;
+
+ else if (strcasecmp (new_token.str, "BYTE") == 0)
new_token.code = T_BYTE;
else if (strcasecmp (new_token.str, "WORD") == 0)
else if (strcasecmp (new_token.str, "DWORD") == 0)
new_token.code = T_DWORD;
+ else if (strcasecmp (new_token.str, "FWORD") == 0)
+ new_token.code = T_FWORD;
+
else if (strcasecmp (new_token.str, "QWORD") == 0)
new_token.code = T_QWORD;
- else if (strcasecmp (new_token.str, "XWORD") == 0)
- new_token.code = T_XWORD;
+ else if (strcasecmp (new_token.str, "TBYTE") == 0
+ /* XXX remove (gcc still uses it) */
+ || strcasecmp (new_token.str, "XWORD") == 0)
+ new_token.code = T_TBYTE;
+
+ else if (strcasecmp (new_token.str, "XMMWORD") == 0
+ || strcasecmp (new_token.str, "OWORD") == 0)
+ new_token.code = T_XMMWORD;
else if (strcasecmp (new_token.str, "PTR") == 0)
new_token.code = T_PTR;
}
}
+ else if (strchr ("+-/*%|&^:[]()~", *intel_parser.op_string))
+ {
+ new_token.code = *intel_parser.op_string;
+ new_token.str[0] = *intel_parser.op_string;
+ new_token.str[1] = '\0';
+ }
+
+ else if (strchr ("<>", *intel_parser.op_string)
+ && *intel_parser.op_string == *(intel_parser.op_string + 1))
+ {
+ new_token.code = *intel_parser.op_string == '<' ? T_SHL : T_SHR;
+ new_token.str[0] = *intel_parser.op_string;
+ new_token.str[1] = *intel_parser.op_string;
+ new_token.str[2] = '\0';
+ }
+
else
- as_bad (_("Unrecognized token `%s'\n"), intel_parser.op_string);
+ as_bad (_("Unrecognized token `%s'"), intel_parser.op_string);
intel_parser.op_string += strlen (new_token.str);
cur_token = new_token;
prev_token.reg = NULL;
prev_token.str = NULL;
}
+
+int
+tc_x86_regname_to_dw2regnum (const char *regname)
+{
+ unsigned int regnum;
+ unsigned int regnames_count;
+ char *regnames_32[] =
+ {
+ "eax", "ecx", "edx", "ebx",
+ "esp", "ebp", "esi", "edi",
+ "eip"
+ };
+ char *regnames_64[] =
+ {
+ "rax", "rbx", "rcx", "rdx",
+ "rdi", "rsi", "rbp", "rsp",
+ "r8", "r9", "r10", "r11",
+ "r12", "r13", "r14", "r15",
+ "rip"
+ };
+ char **regnames;
+
+ if (flag_code == CODE_64BIT)
+ {
+ regnames = regnames_64;
+ regnames_count = ARRAY_SIZE (regnames_64);
+ }
+ else
+ {
+ regnames = regnames_32;
+ regnames_count = ARRAY_SIZE (regnames_32);
+ }
+
+ for (regnum = 0; regnum < regnames_count; regnum++)
+ if (strcmp (regname, regnames[regnum]) == 0)
+ return regnum;
+
+ return -1;
+}
+
+void
+tc_x86_frame_initial_instructions (void)
+{
+ static unsigned int sp_regno;
+
+ if (!sp_regno)
+ sp_regno = tc_x86_regname_to_dw2regnum (flag_code == CODE_64BIT
+ ? "rsp" : "esp");
+
+ cfi_add_CFA_def_cfa (sp_regno, -x86_cie_data_alignment);
+ cfi_add_CFA_offset (x86_dwarf2_return_column, x86_cie_data_alignment);
+}
+
+int
+i386_elf_section_type (const char *str, size_t len)
+{
+ if (flag_code == CODE_64BIT
+ && len == sizeof ("unwind") - 1
+ && strncmp (str, "unwind", 6) == 0)
+ return SHT_X86_64_UNWIND;
+
+ return -1;
+}
+
+#ifdef TE_PE
+void
+tc_pe_dwarf2_emit_offset (symbolS *symbol, unsigned int size)
+{
+ expressionS expr;
+
+ expr.X_op = O_secrel;
+ expr.X_add_symbol = symbol;
+ expr.X_add_number = 0;
+ emit_expr (&expr, size);
+}
+#endif