/* tc-i860.c -- Assembler for the Intel i860 architecture.
- Copyright 1989, 1992, 1993, 1994, 1995, 1998, 1999, 2000, 2001, 2002
- Free Software Foundation, Inc.
+ Copyright (C) 1989-2015 Free Software Foundation, Inc.
Brought back from the dead and completely reworked
by Jason Eckhardt <jle@cygnus.com>.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ the Free Software Foundation; either version 3, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
You should have received a copy of the GNU General Public License along
with GAS; see the file COPYING. If not, write to the Free Software
- Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */
-#include <stdio.h>
-#include <string.h>
#include "as.h"
#include "safe-ctype.h"
#include "subsegs.h"
#include "opcode/i860.h"
#include "elf/i860.h"
-/* Defined by default since this is primarily a SVR4/860 assembler.
- However, I'm trying to leave the door open for Intel syntax. Of course,
- if full support for anything other than SVR4 is done, then we should
- select this based on a command-line flag. */
-#define SYNTAX_SVR4
/* The opcode hash table. */
static struct hash_control *op_hash = NULL;
As in 0f12.456 or 0d1.2345e12. */
const char FLT_CHARS[] = "rRsSfFdDxXpP";
-/* Register prefix. */
-#ifdef SYNTAX_SVR4
-static const char reg_prefix = '%';
-#else
-static const char reg_prefix = 0;
-#endif
+/* Register prefix (depends on syntax). */
+static char reg_prefix;
+
+#define MAX_FIXUPS 2
struct i860_it
{
char *error;
unsigned long opcode;
- expressionS exp;
enum expand_type expand;
- bfd_reloc_code_real_type reloc;
- int pcrel;
- valueT fup;
+ struct i860_fi
+ {
+ expressionS exp;
+ bfd_reloc_code_real_type reloc;
+ int pcrel;
+ valueT fup;
+ } fi[MAX_FIXUPS];
} the_insn;
+/* The current fixup count. */
+static int fc;
+
static char *expr_end;
/* Indicates error if a pseudo operation was expanded after a branch. */
/* If true, then warn if any pseudo operations were expanded. */
static int target_warn_expand = 0;
+/* If true, then XP support is enabled. */
+static int target_xp = 0;
+
+/* If true, then Intel syntax is enabled (default to AT&T/SVR4 syntax). */
+static int target_intel_syntax = 0;
+
+
/* Prototypes. */
-static void i860_process_insn PARAMS ((char *));
-static void s_dual PARAMS ((int));
-static void s_enddual PARAMS ((int));
-static void s_atmp PARAMS ((int));
-static int i860_get_expression PARAMS ((char *));
-static bfd_reloc_code_real_type obtain_reloc_for_imm16
- PARAMS ((fixS *, long *));
+static void i860_process_insn (char *);
+static void s_dual (int);
+static void s_enddual (int);
+static void s_atmp (int);
+static void s_align_wrapper (int);
+static int i860_get_expression (char *);
+static bfd_reloc_code_real_type obtain_reloc_for_imm16 (fixS *, long *);
#ifdef DEBUG_I860
-static void print_insn PARAMS ((struct i860_it *));
+static void print_insn (struct i860_it *);
#endif
const pseudo_typeS md_pseudo_table[] =
{
-#ifdef OBJ_ELF
- {"align", s_align_bytes, 0},
-#endif
- {"dual", s_dual, 0},
- {"enddual", s_enddual, 0},
- {"atmp", s_atmp, 0},
- {NULL, 0, 0},
+ {"align", s_align_wrapper, 0},
+ {"dual", s_dual, 0},
+ {"enddual", s_enddual, 0},
+ {"atmp", s_atmp, 0},
+ {NULL, 0, 0},
};
/* Dual-instruction mode handling. */
/* Handle ".dual" directive. */
static void
-s_dual (ignore)
- int ignore ATTRIBUTE_UNUSED;
+s_dual (int ignore ATTRIBUTE_UNUSED)
{
- dual_mode = DUAL_ON;
+ if (target_intel_syntax)
+ dual_mode = DUAL_ON;
+ else
+ as_bad (_("Directive .dual available only with -mintel-syntax option"));
}
/* Handle ".enddual" directive. */
static void
-s_enddual (ignore)
- int ignore ATTRIBUTE_UNUSED;
+s_enddual (int ignore ATTRIBUTE_UNUSED)
{
- dual_mode = DUAL_OFF;
+ if (target_intel_syntax)
+ dual_mode = DUAL_OFF;
+ else
+ as_bad (_("Directive .enddual available only with -mintel-syntax option"));
}
/* Temporary register used when expanding assembler pseudo operations. */
static int atmp = 31;
static void
-s_atmp (ignore)
- int ignore ATTRIBUTE_UNUSED;
+s_atmp (int ignore ATTRIBUTE_UNUSED)
{
- register int temp;
+ int temp;
+
+ if (! target_intel_syntax)
+ {
+ as_bad (_("Directive .atmp available only with -mintel-syntax option"));
+ demand_empty_rest_of_line ();
+ return;
+ }
+
if (strncmp (input_line_pointer, "sp", 2) == 0)
{
input_line_pointer += 2;
demand_empty_rest_of_line ();
}
+/* Handle ".align" directive depending on syntax mode.
+ AT&T/SVR4 syntax uses the standard align directive. However,
+ the Intel syntax additionally allows keywords for the alignment
+ parameter: ".align type", where type is one of {.short, .long,
+ .quad, .single, .double} representing alignments of 2, 4,
+ 16, 4, and 8, respectively. */
+static void
+s_align_wrapper (int arg)
+{
+ char *parm = input_line_pointer;
+
+ if (target_intel_syntax)
+ {
+ /* Replace a keyword with the equivalent integer so the
+ standard align routine can parse the directive. */
+ if (strncmp (parm, ".short", 6) == 0)
+ strncpy (parm, " 2", 6);
+ else if (strncmp (parm, ".long", 5) == 0)
+ strncpy (parm, " 4", 5);
+ else if (strncmp (parm, ".quad", 5) == 0)
+ strncpy (parm, " 16", 5);
+ else if (strncmp (parm, ".single", 7) == 0)
+ strncpy (parm, " 4", 7);
+ else if (strncmp (parm, ".double", 7) == 0)
+ strncpy (parm, " 8", 7);
+
+ while (*input_line_pointer == ' ')
+ ++input_line_pointer;
+ }
+
+ s_align_bytes (arg);
+}
+
/* This function is called once, at assembler startup time. It should
set up all the tables and data structures that the MD part of the
assembler will need. */
void
-md_begin ()
+md_begin (void)
{
const char *retval = NULL;
int lose = 0;
while (i860_opcodes[i].name != NULL)
{
const char *name = i860_opcodes[i].name;
- retval = hash_insert (op_hash, name, (PTR)&i860_opcodes[i]);
+ retval = hash_insert (op_hash, name, (void *) &i860_opcodes[i]);
if (retval != NULL)
{
fprintf (stderr, _("internal error: can't hash `%s': %s\n"),
if (lose)
as_fatal (_("Defective assembler. No assembly attempted."));
+
+ /* Set the register prefix for either Intel or AT&T/SVR4 syntax. */
+ reg_prefix = target_intel_syntax ? 0 : '%';
}
/* This is the core of the machine-dependent assembler. STR points to a
machine dependent instruction. This function emits the frags/bytes
it assembles to. */
void
-md_assemble (str)
- char *str;
+md_assemble (char *str)
{
char *destp;
int num_opcodes = 1;
int i;
struct i860_it pseudo[3];
- assert (str);
+ gas_assert (str);
+ fc = 0;
/* Assemble the instruction. */
i860_process_insn (str);
/* Check for expandable flag to produce pseudo-instructions. This
is an undesirable feature that should be avoided. */
- if (the_insn.expand != 0
- && ! (the_insn.fup & (OP_SEL_HA | OP_SEL_H | OP_SEL_L | OP_SEL_GOT
+ if (the_insn.expand != 0 && the_insn.expand != XP_ONLY
+ && ! (the_insn.fi[0].fup & (OP_SEL_HA | OP_SEL_H | OP_SEL_L | OP_SEL_GOT
| OP_SEL_GOTOFF | OP_SEL_PLT)))
{
for (i = 0; i < 3; i++)
pseudo[i] = the_insn;
+ fc = 1;
switch (the_insn.expand)
{
break;
case E_MOV:
- if (the_insn.exp.X_add_symbol == NULL
- && the_insn.exp.X_op_symbol == NULL
- && (the_insn.exp.X_add_number < (1 << 15)
- && the_insn.exp.X_add_number >= -(1 << 15)))
+ if (the_insn.fi[0].exp.X_add_symbol == NULL
+ && the_insn.fi[0].exp.X_op_symbol == NULL
+ && (the_insn.fi[0].exp.X_add_number < (1 << 15)
+ && the_insn.fi[0].exp.X_add_number >= -(1 << 15)))
break;
/* Emit "or l%const,r0,ireg_dest". */
pseudo[0].opcode = (the_insn.opcode & 0x001f0000) | 0xe4000000;
- pseudo[0].fup = (OP_IMM_S16 | OP_SEL_L);
+ pseudo[0].fi[0].fup = (OP_IMM_S16 | OP_SEL_L);
/* Emit "orh h%const,ireg_dest,ireg_dest". */
pseudo[1].opcode = (the_insn.opcode & 0x03ffffff) | 0xec000000
| ((the_insn.opcode & 0x001f0000) << 5);
- pseudo[1].fup = (OP_IMM_S16 | OP_SEL_H);
+ pseudo[1].fi[0].fup = (OP_IMM_S16 | OP_SEL_H);
num_opcodes = 2;
break;
case E_ADDR:
- if (the_insn.exp.X_add_symbol == NULL
- && the_insn.exp.X_op_symbol == NULL
- && (the_insn.exp.X_add_number < (1 << 15)
- && the_insn.exp.X_add_number >= -(1 << 15)))
+ if (the_insn.fi[0].exp.X_add_symbol == NULL
+ && the_insn.fi[0].exp.X_op_symbol == NULL
+ && (the_insn.fi[0].exp.X_add_number < (1 << 15)
+ && the_insn.fi[0].exp.X_add_number >= -(1 << 15)))
break;
- /* Emit "orh ha%addr_expr,r0,r31". */
- pseudo[0].opcode = 0xec000000 | (atmp << 16);
- pseudo[0].fup = (OP_IMM_S16 | OP_SEL_HA);
+ /* Emit "orh ha%addr_expr,ireg_src2,r31". */
+ pseudo[0].opcode = 0xec000000 | (the_insn.opcode & 0x03e00000)
+ | (atmp << 16);
+ pseudo[0].fi[0].fup = (OP_IMM_S16 | OP_SEL_HA);
/* Emit "l%addr_expr(r31),ireg_dest". We pick up the fixup
information from the original instruction. */
pseudo[1].opcode = (the_insn.opcode & ~0x03e00000) | (atmp << 21);
- pseudo[1].fup = the_insn.fup | OP_SEL_L;
+ pseudo[1].fi[0].fup = the_insn.fi[0].fup | OP_SEL_L;
num_opcodes = 2;
break;
case E_U32:
- if (the_insn.exp.X_add_symbol == NULL
- && the_insn.exp.X_op_symbol == NULL
- && (the_insn.exp.X_add_number < (1 << 16)
- && the_insn.exp.X_add_number >= 0))
+ if (the_insn.fi[0].exp.X_add_symbol == NULL
+ && the_insn.fi[0].exp.X_op_symbol == NULL
+ && (the_insn.fi[0].exp.X_add_number < (1 << 16)
+ && the_insn.fi[0].exp.X_add_number >= 0))
break;
/* Emit "$(opcode)h h%const,ireg_src2,r31". */
pseudo[0].opcode = (the_insn.opcode & 0xf3e0ffff) | 0x0c000000
| (atmp << 16);
- pseudo[0].fup = (OP_IMM_S16 | OP_SEL_H);
+ pseudo[0].fi[0].fup = (OP_IMM_S16 | OP_SEL_H);
/* Emit "$(opcode) l%const,r31,ireg_dest". */
pseudo[1].opcode = (the_insn.opcode & 0xf01f0000) | 0x04000000
| (atmp << 21);
- pseudo[1].fup = (OP_IMM_S16 | OP_SEL_L);
+ pseudo[1].fi[0].fup = (OP_IMM_S16 | OP_SEL_L);
num_opcodes = 2;
break;
case E_AND:
- if (the_insn.exp.X_add_symbol == NULL
- && the_insn.exp.X_op_symbol == NULL
- && (the_insn.exp.X_add_number < (1 << 16)
- && the_insn.exp.X_add_number >= 0))
+ if (the_insn.fi[0].exp.X_add_symbol == NULL
+ && the_insn.fi[0].exp.X_op_symbol == NULL
+ && (the_insn.fi[0].exp.X_add_number < (1 << 16)
+ && the_insn.fi[0].exp.X_add_number >= 0))
break;
/* Emit "andnot h%const,ireg_src2,r31". */
pseudo[0].opcode = (the_insn.opcode & 0x03e0ffff) | 0xd4000000
| (atmp << 16);
- pseudo[0].fup = (OP_IMM_S16 | OP_SEL_H);
- pseudo[0].exp.X_add_number = -1 - the_insn.exp.X_add_number;
+ pseudo[0].fi[0].fup = (OP_IMM_S16 | OP_SEL_H);
+ pseudo[0].fi[0].exp.X_add_number =
+ -1 - the_insn.fi[0].exp.X_add_number;
/* Emit "andnot l%const,r31,ireg_dest". */
pseudo[1].opcode = (the_insn.opcode & 0x001f0000) | 0xd4000000
| (atmp << 21);
- pseudo[1].fup = (OP_IMM_S16 | OP_SEL_L);
- pseudo[1].exp.X_add_number = -1 - the_insn.exp.X_add_number;
+ pseudo[1].fi[0].fup = (OP_IMM_S16 | OP_SEL_L);
+ pseudo[1].fi[0].exp.X_add_number =
+ -1 - the_insn.fi[0].exp.X_add_number;
num_opcodes = 2;
break;
case E_S32:
- if (the_insn.exp.X_add_symbol == NULL
- && the_insn.exp.X_op_symbol == NULL
- && (the_insn.exp.X_add_number < (1 << 15)
- && the_insn.exp.X_add_number >= -(1 << 15)))
+ if (the_insn.fi[0].exp.X_add_symbol == NULL
+ && the_insn.fi[0].exp.X_op_symbol == NULL
+ && (the_insn.fi[0].exp.X_add_number < (1 << 15)
+ && the_insn.fi[0].exp.X_add_number >= -(1 << 15)))
break;
/* Emit "orh h%const,r0,r31". */
pseudo[0].opcode = 0xec000000 | (atmp << 16);
- pseudo[0].fup = (OP_IMM_S16 | OP_SEL_H);
+ pseudo[0].fi[0].fup = (OP_IMM_S16 | OP_SEL_H);
/* Emit "or l%const,r31,r31". */
pseudo[1].opcode = 0xe4000000 | (atmp << 21) | (atmp << 16);
- pseudo[1].fup = (OP_IMM_S16 | OP_SEL_L);
+ pseudo[1].fi[0].fup = (OP_IMM_S16 | OP_SEL_L);
/* Emit "r31,ireg_src2,ireg_dest". */
pseudo[2].opcode = (the_insn.opcode & ~0x0400ffff) | (atmp << 11);
- pseudo[2].fup = OP_IMM_S16;
+ pseudo[2].fi[0].fup = OP_IMM_S16;
num_opcodes = 3;
break;
as_warn (_("An instruction was expanded (%s)"), str);
}
+ dwarf2_emit_insn (0);
i = 0;
do
{
+ int tmp;
+
/* Output the opcode. Note that the i860 always reads instructions
as little-endian data. */
destp = frag_more (4);
number_to_chars_littleendian (destp, the_insn.opcode, 4);
/* Check for expanded opcode after branch or in dual mode. */
- last_expand = the_insn.pcrel;
-
- /* Output the symbol-dependent stuff. */
- if (the_insn.fup != OP_NONE)
- {
- fixS *fix;
- fix = fix_new_exp (frag_now,
- destp - frag_now->fr_literal,
- 4,
- &the_insn.exp,
- the_insn.pcrel,
- the_insn.reloc);
-
- /* Despite the odd name, this is a scratch field. We use
- it to encode operand type information. */
- fix->fx_addnumber = the_insn.fup;
- }
+ last_expand = the_insn.fi[0].pcrel;
+
+ /* Output the symbol-dependent stuff. Only btne and bte will ever
+ loop more than once here, since only they (possibly) have more
+ than one fixup. */
+ for (tmp = 0; tmp < fc; tmp++)
+ {
+ if (the_insn.fi[tmp].fup != OP_NONE)
+ {
+ fixS *fix;
+ fix = fix_new_exp (frag_now,
+ destp - frag_now->fr_literal,
+ 4,
+ &the_insn.fi[tmp].exp,
+ the_insn.fi[tmp].pcrel,
+ the_insn.fi[tmp].reloc);
+
+ /* Despite the odd name, this is a scratch field. We use
+ it to encode operand type information. */
+ fix->fx_addnumber = the_insn.fi[tmp].fup;
+ }
+ }
the_insn = pseudo[++i];
}
while (--num_opcodes > 0);
/* Assemble the instruction pointed to by STR. */
static void
-i860_process_insn (str)
- char *str;
+i860_process_insn (char *str)
{
char *s;
const char *args;
args_start = s;
for (;;)
{
+ int t;
opcode = insn->match;
memset (&the_insn, '\0', sizeof (the_insn));
- the_insn.reloc = BFD_RELOC_NONE;
- the_insn.pcrel = 0;
- the_insn.fup = OP_NONE;
+ fc = 0;
+ for (t = 0; t < MAX_FIXUPS; t++)
+ {
+ the_insn.fi[t].reloc = BFD_RELOC_NONE;
+ the_insn.fi[t].pcrel = 0;
+ the_insn.fi[t].fup = OP_NONE;
+ }
/* Build the opcode, checking as we go that the operands match. */
for (args = insn->args; ; ++args)
{
+ if (fc > MAX_FIXUPS)
+ abort ();
+
switch (*args)
{
/* Check for register prefix if necessary. */
if (reg_prefix && *s != reg_prefix)
goto error;
- else
+ else if (reg_prefix)
s++;
switch (*s)
/* Check for register prefix if necessary. */
if (reg_prefix && *s != reg_prefix)
goto error;
- else
+ else if (reg_prefix)
s++;
if (*s++ == 'f' && ISDIGIT (*s))
case 'g':
opcode |= mask << 16;
- if (dual_mode != DUAL_OFF)
- opcode |= (1 << 9);
- if (dual_mode == DUAL_DDOT)
- dual_mode = DUAL_OFF;
- if (dual_mode == DUAL_ONDDOT)
- dual_mode = DUAL_ON;
if ((opcode & (1 << 10)) && mask != 0
&& (mask == ((opcode >> 11) & 0x1f)))
as_warn (_("Pipelined instruction: fsrc1 = fdest"));
/* Check for register prefix if necessary. */
if (reg_prefix && *s != reg_prefix)
goto error;
- else
+ else if (reg_prefix)
s++;
if (strncmp (s, "fir", 3) == 0)
s += 4;
continue;
}
+ /* The remaining control registers are XP only. */
+ if (target_xp && strncmp (s, "bear", 4) == 0)
+ {
+ opcode |= 0x6 << 21;
+ s += 4;
+ continue;
+ }
+ if (target_xp && strncmp (s, "ccr", 3) == 0)
+ {
+ opcode |= 0x7 << 21;
+ s += 3;
+ continue;
+ }
+ if (target_xp && strncmp (s, "p0", 2) == 0)
+ {
+ opcode |= 0x8 << 21;
+ s += 2;
+ continue;
+ }
+ if (target_xp && strncmp (s, "p1", 2) == 0)
+ {
+ opcode |= 0x9 << 21;
+ s += 2;
+ continue;
+ }
+ if (target_xp && strncmp (s, "p2", 2) == 0)
+ {
+ opcode |= 0xa << 21;
+ s += 2;
+ continue;
+ }
+ if (target_xp && strncmp (s, "p3", 2) == 0)
+ {
+ opcode |= 0xb << 21;
+ s += 2;
+ continue;
+ }
break;
/* 5-bit immediate in src1. */
if (! i860_get_expression (s))
{
s = expr_end;
- the_insn.fup |= OP_IMM_U5;
+ the_insn.fi[fc].fup |= OP_IMM_U5;
+ fc++;
continue;
}
break;
/* 26-bit immediate, relative branch (lbroff). */
case 'l':
- the_insn.pcrel = 1;
- the_insn.fup |= OP_IMM_BR26;
+ the_insn.fi[fc].pcrel = 1;
+ the_insn.fi[fc].fup |= OP_IMM_BR26;
goto immediate;
/* 16-bit split immediate, relative branch (sbroff). */
case 'r':
- the_insn.pcrel = 1;
- the_insn.fup |= OP_IMM_BR16;
+ the_insn.fi[fc].pcrel = 1;
+ the_insn.fi[fc].fup |= OP_IMM_BR16;
goto immediate;
/* 16-bit split immediate. */
case 's':
- the_insn.fup |= OP_IMM_SPLIT16;
+ the_insn.fi[fc].fup |= OP_IMM_SPLIT16;
goto immediate;
/* 16-bit split immediate, byte aligned (st.b). */
case 'S':
- the_insn.fup |= OP_IMM_SPLIT16;
+ the_insn.fi[fc].fup |= OP_IMM_SPLIT16;
goto immediate;
/* 16-bit split immediate, half-word aligned (st.s). */
case 'T':
- the_insn.fup |= (OP_IMM_SPLIT16 | OP_ENCODE1 | OP_ALIGN2);
+ the_insn.fi[fc].fup |= (OP_IMM_SPLIT16 | OP_ENCODE1 | OP_ALIGN2);
goto immediate;
/* 16-bit split immediate, word aligned (st.l). */
case 'U':
- the_insn.fup |= (OP_IMM_SPLIT16 | OP_ENCODE1 | OP_ALIGN4);
+ the_insn.fi[fc].fup |= (OP_IMM_SPLIT16 | OP_ENCODE1 | OP_ALIGN4);
goto immediate;
/* 16-bit immediate. */
case 'i':
- the_insn.fup |= OP_IMM_S16;
+ the_insn.fi[fc].fup |= OP_IMM_S16;
goto immediate;
/* 16-bit immediate, byte aligned (ld.b). */
case 'I':
- the_insn.fup |= OP_IMM_S16;
+ the_insn.fi[fc].fup |= OP_IMM_S16;
goto immediate;
/* 16-bit immediate, half-word aligned (ld.s). */
case 'J':
- the_insn.fup |= (OP_IMM_S16 | OP_ENCODE1 | OP_ALIGN2);
+ the_insn.fi[fc].fup |= (OP_IMM_S16 | OP_ENCODE1 | OP_ALIGN2);
goto immediate;
/* 16-bit immediate, word aligned (ld.l, {p}fld.l, fst.l). */
case 'K':
if (insn->name[0] == 'l')
- the_insn.fup |= (OP_IMM_S16 | OP_ENCODE1 | OP_ALIGN4);
+ the_insn.fi[fc].fup |= (OP_IMM_S16 | OP_ENCODE1 | OP_ALIGN4);
else
- the_insn.fup |= (OP_IMM_S16 | OP_ENCODE2 | OP_ALIGN4);
+ the_insn.fi[fc].fup |= (OP_IMM_S16 | OP_ENCODE2 | OP_ALIGN4);
goto immediate;
/* 16-bit immediate, double-word aligned ({p}fld.d, fst.d). */
case 'L':
- the_insn.fup |= (OP_IMM_S16 | OP_ENCODE3 | OP_ALIGN8);
+ the_insn.fi[fc].fup |= (OP_IMM_S16 | OP_ENCODE3 | OP_ALIGN8);
goto immediate;
/* 16-bit immediate, quad-word aligned (fld.q, fst.q). */
case 'M':
- the_insn.fup |= (OP_IMM_S16 | OP_ENCODE3 | OP_ALIGN16);
+ the_insn.fi[fc].fup |= (OP_IMM_S16 | OP_ENCODE3 | OP_ALIGN16);
/*FALLTHROUGH*/
SVR4 syntax. The Intel syntax is "ha%immediate"
whereas SVR4 syntax is "[immediate]@ha". */
immediate:
-#ifdef SYNTAX_SVR4
- if (*s == ' ')
- s++;
-
- /* Note that if i860_get_expression() fails, we will still
- have created U entries in the symbol table for the
- 'symbols' in the input string. Try not to create U
- symbols for registers, etc. */
- if (! i860_get_expression (s))
- s = expr_end;
- else
- goto error;
-
- if (strncmp (s, "@ha", 3) == 0)
- {
- the_insn.fup |= OP_SEL_HA;
- s += 3;
- }
- else if (strncmp (s, "@h", 2) == 0)
+ if (target_intel_syntax == 0)
{
- the_insn.fup |= OP_SEL_H;
- s += 2;
- }
- else if (strncmp (s, "@l", 2) == 0)
- {
- the_insn.fup |= OP_SEL_L;
- s += 2;
- }
- else if (strncmp (s, "@gotoff", 7) == 0
- || strncmp (s, "@GOTOFF", 7) == 0)
- {
- as_bad (_("Assembler does not yet support PIC"));
- the_insn.fup |= OP_SEL_GOTOFF;
- s += 7;
- }
- else if (strncmp (s, "@got", 4) == 0
- || strncmp (s, "@GOT", 4) == 0)
- {
- as_bad (_("Assembler does not yet support PIC"));
- the_insn.fup |= OP_SEL_GOT;
- s += 4;
- }
- else if (strncmp (s, "@plt", 4) == 0
- || strncmp (s, "@PLT", 4) == 0)
- {
- as_bad (_("Assembler does not yet support PIC"));
- the_insn.fup |= OP_SEL_PLT;
- s += 4;
- }
-
- the_insn.expand = insn->expand;
+ /* AT&T/SVR4 syntax. */
+ if (*s == ' ')
+ s++;
+
+ /* Note that if i860_get_expression() fails, we will still
+ have created U entries in the symbol table for the
+ 'symbols' in the input string. Try not to create U
+ symbols for registers, etc. */
+ if (! i860_get_expression (s))
+ s = expr_end;
+ else
+ goto error;
+
+ if (strncmp (s, "@ha", 3) == 0)
+ {
+ the_insn.fi[fc].fup |= OP_SEL_HA;
+ s += 3;
+ }
+ else if (strncmp (s, "@h", 2) == 0)
+ {
+ the_insn.fi[fc].fup |= OP_SEL_H;
+ s += 2;
+ }
+ else if (strncmp (s, "@l", 2) == 0)
+ {
+ the_insn.fi[fc].fup |= OP_SEL_L;
+ s += 2;
+ }
+ else if (strncmp (s, "@gotoff", 7) == 0
+ || strncmp (s, "@GOTOFF", 7) == 0)
+ {
+ as_bad (_("Assembler does not yet support PIC"));
+ the_insn.fi[fc].fup |= OP_SEL_GOTOFF;
+ s += 7;
+ }
+ else if (strncmp (s, "@got", 4) == 0
+ || strncmp (s, "@GOT", 4) == 0)
+ {
+ as_bad (_("Assembler does not yet support PIC"));
+ the_insn.fi[fc].fup |= OP_SEL_GOT;
+ s += 4;
+ }
+ else if (strncmp (s, "@plt", 4) == 0
+ || strncmp (s, "@PLT", 4) == 0)
+ {
+ as_bad (_("Assembler does not yet support PIC"));
+ the_insn.fi[fc].fup |= OP_SEL_PLT;
+ s += 4;
+ }
- continue;
-#else /* ! SYNTAX_SVR4 */
- if (*s == ' ')
- s++;
- if (strncmp (s, "ha%", 3) == 0)
- {
- the_insn.fup |= OP_SEL_HA;
- s += 3;
- }
- else if (strncmp (s, "h%", 2) == 0)
- {
- the_insn.fup |= OP_SEL_H;
- s += 2;
+ the_insn.expand = insn->expand;
+ fc++;
+
+ continue;
}
- else if (strncmp (s, "l%", 2) == 0)
+ else
{
- the_insn.fup |= OP_SEL_L;
- s += 2;
+ /* Intel syntax. */
+ if (*s == ' ')
+ s++;
+ if (strncmp (s, "ha%", 3) == 0)
+ {
+ the_insn.fi[fc].fup |= OP_SEL_HA;
+ s += 3;
+ }
+ else if (strncmp (s, "h%", 2) == 0)
+ {
+ the_insn.fi[fc].fup |= OP_SEL_H;
+ s += 2;
+ }
+ else if (strncmp (s, "l%", 2) == 0)
+ {
+ the_insn.fi[fc].fup |= OP_SEL_L;
+ s += 2;
+ }
+ the_insn.expand = insn->expand;
+
+ /* Note that if i860_get_expression() fails, we will still
+ have created U entries in the symbol table for the
+ 'symbols' in the input string. Try not to create U
+ symbols for registers, etc. */
+ if (! i860_get_expression (s))
+ s = expr_end;
+ else
+ goto error;
+
+ fc++;
+ continue;
}
- the_insn.expand = insn->expand;
-
- /* Note that if i860_get_expression() fails, we will still
- have created U entries in the symbol table for the
- 'symbols' in the input string. Try not to create U
- symbols for registers, etc. */
- if (! i860_get_expression (s))
- s = expr_end;
- else
- goto error;
-
- continue;
-#endif /* SYNTAX_SVR4 */
break;
default:
break;
}
+ /* Set the dual bit on this instruction if necessary. */
+ if (dual_mode != DUAL_OFF)
+ {
+ if ((opcode & 0xfc000000) == 0x48000000 || opcode == 0xb0000000)
+ {
+ /* The instruction is a flop or a fnop, so set its dual bit
+ (but check that it is 8-byte aligned). */
+ if (((frag_now->fr_address + frag_now_fix_octets ()) & 7) == 0)
+ opcode |= (1 << 9);
+ else
+ as_bad (_("'d.%s' must be 8-byte aligned"), insn->name);
+
+ if (dual_mode == DUAL_DDOT)
+ dual_mode = DUAL_OFF;
+ else if (dual_mode == DUAL_ONDDOT)
+ dual_mode = DUAL_ON;
+ }
+ else if (dual_mode == DUAL_DDOT || dual_mode == DUAL_ONDDOT)
+ as_bad (_("Prefix 'd.' invalid for instruction `%s'"), insn->name);
+ }
+
the_insn.opcode = opcode;
+
+ /* Only recognize XP instructions when the user has requested it. */
+ if (insn->expand == XP_ONLY && ! target_xp)
+ as_bad (_("Unknown opcode: `%s'"), insn->name);
}
static int
-i860_get_expression (str)
- char *str;
+i860_get_expression (char *str)
{
char *save_in;
segT seg;
save_in = input_line_pointer;
input_line_pointer = str;
- seg = expression (&the_insn.exp);
+ seg = expression (&the_insn.fi[fc].exp);
if (seg != absolute_section
&& seg != undefined_section
&& ! SEG_NORMAL (seg))
return 0;
}
-/* Turn a string in input_line_pointer into a floating point constant of
- type TYPE, and store the appropriate bytes in *LITP. The number of
- LITTLENUMS emitted is stored in *SIZEP. An error message is returned,
- or NULL on OK. */
-
-/* Equal to MAX_PRECISION in atof-ieee.c. */
-#define MAX_LITTLENUMS 6
-
char *
-md_atof (type, litP, sizeP)
- char type;
- char *litP;
- int *sizeP;
+md_atof (int type, char *litP, int *sizeP)
{
- int prec;
- LITTLENUM_TYPE words[MAX_LITTLENUMS];
- LITTLENUM_TYPE *wordP;
- char *t;
- char *atof_ieee ();
-
- switch (type)
- {
- case 'f':
- case 'F':
- case 's':
- case 'S':
- prec = 2;
- break;
-
- case 'd':
- case 'D':
- case 'r':
- case 'R':
- prec = 4;
- break;
-
- case 'x':
- case 'X':
- prec = 6;
- break;
-
- case 'p':
- case 'P':
- prec = 6;
- break;
-
- default:
- *sizeP = 0;
- return _("Bad call to MD_ATOF()");
- }
- t = atof_ieee (input_line_pointer, type, words);
- if (t)
- input_line_pointer = t;
- *sizeP = prec * sizeof (LITTLENUM_TYPE);
- for (wordP = words; prec--;)
- {
- md_number_to_chars (litP, (long) (*wordP++), sizeof (LITTLENUM_TYPE));
- litP += sizeof (LITTLENUM_TYPE);
- }
- return 0;
+ return ieee_md_atof (type, litP, sizeP, TRUE);
}
/* Write out in current endian mode. */
void
-md_number_to_chars (buf, val, n)
- char *buf;
- valueT val;
- int n;
+md_number_to_chars (char *buf, valueT val, int n)
{
if (target_big_endian)
number_to_chars_bigendian (buf, val, n);
number_to_chars_littleendian (buf, val, n);
}
-/* This should never be called for i860. */
-void
-md_number_to_disp (buf, val, n)
- char *buf ATTRIBUTE_UNUSED;
- long val ATTRIBUTE_UNUSED;
- int n ATTRIBUTE_UNUSED;
-{
- as_fatal (_("md_number_to_disp\n"));
-}
-
-/* This should never be called for i860. */
-void
-md_number_to_field (buf, val, fix)
- char *buf ATTRIBUTE_UNUSED;
- long val ATTRIBUTE_UNUSED;
- void *fix ATTRIBUTE_UNUSED;
-{
- as_fatal (_("i860_number_to_field\n"));
-}
-
/* This should never be called for i860. */
int
-md_estimate_size_before_relax (fragP, segtype)
- register fragS *fragP ATTRIBUTE_UNUSED;
- segT segtype ATTRIBUTE_UNUSED;
+md_estimate_size_before_relax (fragS *fragP ATTRIBUTE_UNUSED,
+ segT segtype ATTRIBUTE_UNUSED)
{
- as_fatal (_("i860_estimate_size_before_relax\n"));
+ as_fatal (_("relaxation not supported\n"));
}
#ifdef DEBUG_I860
static void
-print_insn (insn)
- struct i860_it *insn;
+print_insn (struct i860_it *insn)
{
if (insn->error)
fprintf (stderr, "ERROR: %s\n", insn->error);
#define OPTION_EB (OPTION_MD_BASE + 0)
#define OPTION_EL (OPTION_MD_BASE + 1)
#define OPTION_WARN_EXPAND (OPTION_MD_BASE + 2)
+#define OPTION_XP (OPTION_MD_BASE + 3)
+#define OPTION_INTEL_SYNTAX (OPTION_MD_BASE + 4)
struct option md_longopts[] = {
{ "EB", no_argument, NULL, OPTION_EB },
{ "EL", no_argument, NULL, OPTION_EL },
{ "mwarn-expand", no_argument, NULL, OPTION_WARN_EXPAND },
+ { "mxp", no_argument, NULL, OPTION_XP },
+ { "mintel-syntax",no_argument, NULL, OPTION_INTEL_SYNTAX },
{ NULL, no_argument, NULL, 0 }
};
size_t md_longopts_size = sizeof (md_longopts);
int
-md_parse_option (c, arg)
- int c;
- char *arg ATTRIBUTE_UNUSED;
+md_parse_option (int c, char *arg ATTRIBUTE_UNUSED)
{
switch (c)
{
target_warn_expand = 1;
break;
+ case OPTION_XP:
+ target_xp = 1;
+ break;
+
+ case OPTION_INTEL_SYNTAX:
+ target_intel_syntax = 1;
+ break;
+
#ifdef OBJ_ELF
/* SVR4 argument compatibility (-V): print version ID. */
case 'V':
}
void
-md_show_usage (stream)
- FILE *stream;
+md_show_usage (FILE *stream)
{
fprintf (stream, _("\
-EL generate code for little endian mode (default)\n\
-EB generate code for big endian mode\n\
- -mwarn-expand warn if pseudo operations are expanded\n"));
+ -mwarn-expand warn if pseudo operations are expanded\n\
+ -mxp enable i860XP support (disabled by default)\n\
+ -mintel-syntax enable Intel syntax (default to AT&T/SVR4)\n"));
#ifdef OBJ_ELF
/* SVR4 compatibility flags. */
fprintf (stream, _("\
\f
/* We have no need to default values of symbols. */
symbolS *
-md_undefined_symbol (name)
- char *name ATTRIBUTE_UNUSED;
+md_undefined_symbol (char *name ATTRIBUTE_UNUSED)
{
return 0;
}
/* The i860 denotes auto-increment with '++'. */
void
-md_operand (exp)
- expressionS *exp;
+md_operand (expressionS *exp)
{
char *s;
/* Round up a section size to the appropriate boundary. */
valueT
-md_section_align (segment, size)
- segT segment ATTRIBUTE_UNUSED;
- valueT size ATTRIBUTE_UNUSED;
+md_section_align (segT segment ATTRIBUTE_UNUSED,
+ valueT size ATTRIBUTE_UNUSED)
{
/* Byte alignment is fine. */
return size;
}
/* On the i860, a PC-relative offset is relative to the address of the
- of the offset plus its size. */
+ offset plus its size. */
long
-md_pcrel_from (fixP)
- fixS *fixP;
+md_pcrel_from (fixS *fixP)
{
return fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address;
}
Also adjust the given immediate as necessary. Finally, check that
all constraints (such as alignment) are satisfied. */
static bfd_reloc_code_real_type
-obtain_reloc_for_imm16 (fix, val)
- fixS *fix;
- long *val;
+obtain_reloc_for_imm16 (fixS *fix, long *val)
{
valueT fup = fix->fx_addnumber;
bfd_reloc_code_real_type reloc;
we will have to generate a reloc entry. */
void
-md_apply_fix3 (fix, valP, seg)
- fixS * fix;
- valueT * valP;
- segT seg ATTRIBUTE_UNUSED;
+md_apply_fix (fixS *fix, valueT *valP, segT seg ATTRIBUTE_UNUSED)
{
char *buf;
- long val = * (long *) valP
+ long val = *valP;
unsigned long insn;
valueT fup;
/* Determine the necessary relocations as well as inserting an
immediate into the instruction. */
- if (fup == OP_IMM_U5)
+ if (fup & OP_IMM_U5)
{
if (val & ~0x1f)
as_bad_where (fix->fx_file, fix->fx_line,
else if (fup != OP_NONE)
{
as_bad_where (fix->fx_file, fix->fx_line,
- _("Unrecognized fix-up (0x%08x)"), fup);
+ _("Unrecognized fix-up (0x%08lx)"), (unsigned long) fup);
abort ();
}
else
/* Generate a machine dependent reloc from a fixup. */
arelent*
-tc_gen_reloc (section, fixp)
- asection *section ATTRIBUTE_UNUSED;
- fixS *fixp;
+tc_gen_reloc (asection *section ATTRIBUTE_UNUSED,
+ fixS *fixp)
{
arelent *reloc;
}
return reloc;
}
+
+/* This is called from HANDLE_ALIGN in write.c. Fill in the contents
+ of an rs_align_code fragment. */
+
+void
+i860_handle_align (fragS *fragp)
+{
+ /* Instructions are always stored little-endian on the i860. */
+ static const unsigned char le_nop[] = { 0x00, 0x00, 0x00, 0xA0 };
+
+ int bytes;
+ char *p;
+
+ if (fragp->fr_type != rs_align_code)
+ return;
+
+ bytes = fragp->fr_next->fr_address - fragp->fr_address - fragp->fr_fix;
+ p = fragp->fr_literal + fragp->fr_fix;
+
+ /* Make sure we are on a 4-byte boundary, in case someone has been
+ putting data into a text section. */
+ if (bytes & 3)
+ {
+ int fix = bytes & 3;
+ memset (p, 0, fix);
+ p += fix;
+ fragp->fr_fix += fix;
+ }
+
+ memcpy (p, le_nop, 4);
+ fragp->fr_var = 4;
+}
+
+/* This is called after a user-defined label is seen. We check
+ if the label has a double colon (valid in Intel syntax mode only),
+ in which case it should be externalized. */
+
+void
+i860_check_label (symbolS *labelsym)
+{
+ /* At this point, the current line pointer is sitting on the character
+ just after the first colon on the label. */
+ if (target_intel_syntax && *input_line_pointer == ':')
+ {
+ S_SET_EXTERNAL (labelsym);
+ input_line_pointer++;
+ }
+}